TASTECH SERVICES LTD.

Transcription

1 TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aids to Hospitals, Resthomes, OT s, DHB s and the General Public All our products are made to last and proudly made in New Zealand Issue Two Phone (03) e.mail: info@tastechservices.co.nz Fax (03)

2 INDEX Product Page Single Bed/Sofa Raisers Double Bed Raisers 3 Chair/Bed Blocks (individual) Chair Platform - Adjustable Vegetable Spike Board 4 Buttering Board Kitchen Wheelchair Workstation Rehab Trolley with handle 5 Rehab Trolley without handle Transfer Boards 6 Bed Levers 7 Bed Lever cord and cleat Book rest 8 Custom made products Tastech - About us

3 SINGLE BED AND SOFA RAISERS Raiser suitable for both single beds and sofas. Slim design reduces tripping hazard. Bottom plate makes raiser very stable. Made from Plywood. Non slip paint in the leg cavity. Professional lacquer finish. Minimum size mm Maximum size mm Heights mm Leg hole x 90 mm Weight limit: Maximum 600 kgs Codes: SBS50 50mm SBS75 75mm SBS mm SBS mm DOUBLE, QUEEN and KING BED RAISERS Fits double, queen, king and super king beds. Made from Plywood. Professional lacquer finish. Minimum size mm Maximum size mm Heights mm Leg hole x 90 mm Weight limit: Maximum 600 kgs CHAIR/BED BLOCKS Codes: Pyramid shaped with rounded edges and corners. Made from MDF with plywood top for durability and has a professional spray finish. Standard set consists of 4 blocks. Can be sold in any number. Round hole 80mm diameter. Smaller concave hole size available to suit chairs/beds with smaller legs or 50mm twin castors. Square hole 77mm x 77mm. Standard Size 130 x 130mm Heights 50mm-75mm-100mm-150mm Weight limit: Maximum 600kgs Codes: Round hole Castor hole Square hole 50mm CB 1 CB 1C CB 1S 75mm CB 2 CB 2C CB 2S 100mm CB 3 CB 3C CB 3S 150mm CB 4 CB 4C CB 4S DB50 50mm DB75 75mm DB mm DB mm 50mm ( 2 inch ) up to 100mm ( 6 inch ) Round hole - 80mm diameter Square hole - 77mmx77mm Castor hole - 64mm diameter ( suit 50mm wheels ) Page 3

4 CHAIR PLATFORM - ADJUSTABLE Description: Adjustable length and width chair platform. Made from plywood for excellent strength and reusability. Easy installation. Very stable. No tools required Professional lacquer finish. Minimum 500mm x 500mm Maximum 860mm x 860mm Heights: 50mm-75mm-100mm-150mm Codes: ACP50 50mm ACP75 75mm ACP mm ACP mm Weight limit: Maximum 600 kgs VEGETABLE SPIKE BOARD Description: Vegetable and Fruit spike board. Allows the peeling of vegetables with one hand. Made from Perspex. Stainless Steel spikes. Supplied with non slip mat. Standard 140mm x 140mm x 10mm thick. Code: VH 1 BUTTERING BOARD Description: Toast and Bread buttering board. Allows the buttering of bread and toast with one hand. Made from Perspex. Supplied with non slip mat. Standard 140mm x 140mm x 10mm thick. Code: BB 6 Page 4

5 KITCHEN WORKSTATION TROLLEY Description: Kitchen trolley made for use in the kitchen and with a wheelchair. Made from solid furniture grade pine with a professional spray finish and Formica work surface Good alternative to costly kitchen alterations. Height can be made to suit. Has four braked 75mm rubber wheels. Melamine bench top. Width Depth Height 825mm 495mm 820mm Code: KWS REHAB TROLLEY Description: Made from solid furniture grade pine with a professional spray finish. Twin 75mm castors for easy maneuverability. Ideal for moving items from room to room. Bottom tray recessed for safe walking. Options: With or without handle. Width Depth Height (with handle) Height (without handle) Standard 430mm 430mm 870mm 810mm Weight limit on tray: Maximum 30kgs (placed) Codes: Standard Trolley with handle RT 1 H Standard Trolley without handle RT 1 Page 5

6 Description: TASTECH SERVICES LTD TRANSFER BOARD - WOODEN Transfer board (wooden) Made from 18mm plywood. Tapered ends. Professional spray lacquer finish. Straight or curved shaped. Plywood - 18mm thick straight 720mm long x 250mm wide curved 720mm long x 250mm wide straight narrow 755mm long x 210mm wide curved narrow 640mm long x 210mm wide Weight Limit 220 kgs Codes: Wooden boards TB1 - Straight (720mm long x 250mm wide) TB2 - Curved (720mm long x 250mm wide) TBNS - Narrow Straight (755mm long x 210mm wide) TBNC - Narrow Curved (640mm long x 210mm wide) TRANSFER BOARD - PLASTIC Description: Transfer board (plastic) Made from 10mm plastic. Tapered ends. Non slip pads at both ends. Hand hold. Banana - 660mm long - 200mm wide Weight limit - 110kgs Codes: Plastic Boards Straight - TBP1 Banana - TBP2 The Plastic Board is NOT designed for lifting but is designed to be used for seated patient transfers across similar height surfaces and gaps no wider than the inside of the anti-slip pads. The boards have a single hand hold to assist with both positioning and transport. They provide low friction movement and offer independence in individual use. When moving and handling any person, they as a load, can become unpredictable. Ensure the client has suitable sitting balance and upper/lower limb functioning to carry out this activity and can follow and understand commands and instructions. Page 6

7 BED LEVER - Extra Long Removable bed / hand rail. Hooped handle attached to solid block which is at right angles to plywood base. Base slides between base and mattress. Right angle block holds snugly in place. Made from 18mm top grade plywood. Cleat and cord available if required - see page 8 ***HOOPED BAR GUARANTEED TO STAY FIRM FOR THE LIFE OF THE BED LEVER (EASILY 6+ YEARS ) OR WE WILL UNCONDITIONALLY REPLACE IT*** Width of board 290mm Length of board 600mm or 800mm Loop height 550mm Weight limit: 160kgs BED LEVER - Flat Bottom Base slides between base and mattress. Completely flat bottom - no metal bottom plate that may damage furniture. Fits slat beds and divan beds. Made from 18mm plywood. Very strong and reusable. Cleat and cord available if required - see page 8 Code: BL 1 and BL1-600 Width of board 290mm Length of board 600mm or 800mm Weight limit: Hoop height 550mm 150 kgs Code: BLF and BLF -600 BED LEVER - Adjustable Same as Bed Lever Flat but with an adjustable loop. Loop adjusts up and down to required height. Completely flat bottom - no metal bottom plate that may damage furniture. Cleat and cord available if required - see page 8 Width of board Length of board Hoop height Weight limit: 290mm 800mm mm 150 kgs Code: BLA Page 7

8 Cleat and cord for Bed Levers. Suitable for all models. TASTECH SERVICES LTD BED LEVER Cord and Cleat Code: CC Cord and Cleat BOOK REST Description: Book Rest - as per picture. Sides can be set for narrow or wide books. Width - 260mm (total max) Depth - 220mm Height - 280mm Code: BR CUSTOM MADE ITEMS Book Rest Custom made example. Tastech can custom make items for those odd jobs that our off the shelf range do not fit. TASTECH SERVICES LTD - A bit about us Tastech is a family run business that currently has three generations working in our workshop. We make and supply a quality and affordable range of rehabilitation equipment and daily living aids. We manufacture all our products in Christchurch, New Zealand A block - 100x100mm top x 100mm height to suit a couch with extra large feet. Our workshop offers woodwork session for mainly Head Injury clients. This is a hands on part of our business we all enjoy. We also manufacture playcentre equipment. Most of our work is cut out on a CNC machine. This gives us quality, consistency and great flexibility in our manufacturing process. Tastech woodwork session Tastech s CNC machine. Page 8