OUR DRILL RIG RANGE. PRODUCING QUALITY. Ideal for Well drilling Geothermal drilling

Size: px
Start display at page:

Download "OUR DRILL RIG RANGE. PRODUCING QUALITY. Ideal for Well drilling Geothermal drilling"

Transcription

1 PRODUCING QUALITY. Ideal for Well drilling Geothermal drilling Geological exploration drilling Probe drilling OUR DRILL RIG RANGE.

2 Breaking new ground Powerful drilling solutions for highly confined spaces. Our drill rigs are used for well drilling, geothermal drilling and geological exploration drilling. We can also provide you with solutions for almost all types of piling mode. The low weight and compact design enable you to reduce your investment costs to a minimum. Our technology is innovative, allowing you to achieve excellent performance with minimal effort. We can equip our B Series drill rigs with customised features to meet your requirements. We offer four compact drill rigs in different performance categories to suit the required drill depth and soil characteristics. Ideal for Well drilling Geothermal drilling Geological exploration drilling and probe drilling! The powerful B Series compact drill rigs allow you to drill holes even in places that are difficult to access. With a transport width between 88 and 95 cm and a height of just 196 cm, they will fit through standard doorways, enabling you to access all existing buildings. The standard chain chassis ensures that you reach your drilling location even on difficult terrain. Our small and compact drill rigs also ensure that you can travel to the site easily in the first place because they are lightweight: All you need is a car trailer to transport them to the site. Save time Quick to transport Short set-up times Start work without delay Reduce costs Superb price-performance ratio Low investment costs Easy maintenance Easily transported to customer on a trailer At 88 cm wide, easily fits through standard doorways and access ways Impress customers Gentle on gardens Fits through standard doorways Engine with noise insulation Extend hydraulic parking supports and raise mast The B Series is ready for use in minutes 2 3

3 The ADLER drill rig range: Ideal for well drilling geothermal drilling geological exploration drilling probe drilling Save time Quick to transport Short set-up times Start work without delay Reduce costs Superb price-performance ratio Low investment costs Easy maintenance Impress customers Gentle on gardens Fits through standard doorways Engine with noise insulation Suitable for trailers approved up to 3.5 t Can pass through doorways Safety device around rotating pipe included in the supply &PULVER Cathodic dip coating with subsequent powder coating extremely corrosion-resistant B15 B25 B35 B50 Kubota engine: 15 HP Extraction force: 9 kn Weight: 1.18 t Kubota engine: 25 HP Extraction force: 12 kn Weight: 1.33 t Kubota engine: 35 HP Extraction force: 23 kn Weight: 1.98 t Kubota engine: 50 HP Extraction force: 23 kn Weight: 2.28 t down to 25 m! down to 50 m! down to 75 m! down to 100 m! Now also B50 pro 4 5

4 Characteristics of B15 Drill rig B15 Flush drilling* Depth: 25 m Diameter: 150 mm Down-the-hole hammer drilling* Depth: 25 m Diameter: 120 mm Dry drilling* Depth: 10 m Diameter: 110 mm Hollow stem auger procedure* - B15, the compact drill rig for shallow depths Inexpensive starter rig for easy to medium-heavy soils Ideal for depths down to approx. 25 m for drilling diameters of about 150 mm Basic drill for geological explorations Low base weight of around 1.18 t and machine width of 88 cm enable you to work in difficult-toaccess drilling locations Subsoil assessment Probing for unexploded bombs Technical specifications Drive unit (Kubota engine) Fuel tank capacity Crawler chassis Leg supports Casing pipe/travel range Feed Extraction force Feed length Feed system 2 cylinder / 10.8 kw / 15 HP diesel 30 l PT9 rigid Width: 780 mm 4 x mechanical 1.5 m / 1.8 m 6 kn 9 kn 2.2 m Hydraulic motor with roller chain down to 25 m! &PULVER lateral rinsing head clearance transmission (2-speed; 2-way pivot mechanism) clearance 2 1/2" ABK 315: 65 rpm / 90 danm 2" Upon request Mud pump 30 m 3 /h - 3 bar Lifting clamp clearance/ lifting force/stroke up to Ø 219 mm / 50 kn / 200 mm Offset drilling - The mud pump can be integrated into the B15 drill rig on request Hydraulic cable winch: Tractive force/cable length/cable Ø Cable remote control for traction drive Transport dimensions (L / W / H) Weight of basic machine 5 kn / 30 m / 6 mm - 3,250 / 880 / 1,960 mm 1.18 t *) The values stated here may vary depending on soil characteristics. Operating station to control the drilling process Accessories for flush drilling Hydraulic drill pipe breaker Mechanical leg supports 6 7

5 Characteristics of B25 Drill rig B25 Flush drilling* Depth: 50 m Diameter: 170 mm Down-the-hole hammer drilling* Depth: 50 m Diameter: 120 mm Dry drilling* Depth: 15 m Diameter: 125 mm Hollow stem auger procedure* Depth: 15 m Diameter: 180 mm Convenient all-rounder at premium price Ideal for depths down to approx. 50 m for drilling diameters of about 170 mm Subsoil assessment Probing for unexploded bombs Technical specifications Excellent for geological exploration drilling and subsoil assessments Drive unit (Kubota engine) Tank capacity 3 cylinder / 18.5 kw / 25 HP diesel 30 l Powerful, compact machine (only 88 cm wide) with many options for use Crawler chassis (telescopic) Leg supports PT9 width: mm / (optional) PT15 width: 780-1,160 mm 4 x hydraulic Casing pipe/travel range 1.5 m / 1.8 m Geared drill head with two switching stages Feed 8 kn Extraction force 12 kn Feed length 2.2 m down to 50 m! &PULVER Feed system lateral rinsing head clearance transmission (2-speed; 2-way pivot mechanism) clearance 2 1/2" Hydraulic motor with roller chain ABK 400: 70 rpm / 110 danm 2" 1st gear (slow): 41 rpm / 213 danm 2nd gear (fast): 83 rpm / 106 danm Other speeds and torques possible Mud pump 40 m 3 /h - 5 bar Lifting clamp clearance/ lifting force/stroke Offset drilling Hydraulic cable winch: Tractive force/ cable length/cable Ø Mast extension Cable remote control for traction drive Transport dimensions (L / W / H) Weight of basic machine up to Ø 219 mm / 50 kn / 200 mm 5 kn / 30 m / 6 mm 3,250 / 880 / 1,960 mm 1.33 t Safety device around rotating pipe fitted as standard *) The values stated here may vary depending on soil characteristics. B25 with offset drilling attachment for B25: Lifting clamp for drilling cased boreholes Cable winch with 5 kn (500 kg) tractive force Operating station with all drill functions pivot mechanism 8 9

6 Characteristics of B35 * Drill rig B35 Professional machine for low budgets Ideal for depths down to approx. 75 m for drilling diameters of about 200 mm Starter rig for near-surface geothermal drilling and dry drilling Customised to your needs if required Flush drilling* Depth: 75 m Diameter: 200 mm Down-the-hole hammer drilling* Depth: 75 m Diameter: 130 mm Dry drilling* Depth: 15 m Diameter: 146 mm Hollow stem auger procedure* Depth: 20 m Diameter: 205 mm Subsoil assessment Probing for unexploded bombs Technical specifications Drive unit (Kubota engine) 3 cylinder / 26.1 kw / 35 HP diesel Tank capacity 45 l Crawler chassis (telescopic) PT15 Width 780-1,160 mm Flush drill head, breaker, hydraulic clamp and lifting clamp Leg supports 4 x hydraulic Casing pipe/travel range 1.5 m / 1.8 m (optional 2.0 m / 2.3 m) Feed 15 kn Lifting clamp Extraction force 23 kn Feed length 2.2 m (optional 3.0 m) Feed system Hydraulic motor with roller chain down to 75 m! &PULVER lateral rinsing head clearance transmission (2-speed; 2-way pivot mechanism) clearance 2 1/2" ABK 630: 80 rpm / 165 danm 2 1/2" 1st gear (slow): 61 rpm / 290 danm 2nd gear (fast): 122 rpm / 145 danm Other speeds and torques possible Mud pump 80 m 3 /h - 5 bar Lifting clamp clearance/ lifting force/stroke Offset drilling Hydraulic cable winch: Tractive force/ cable length/cable Ø Mast extension Cable remote control for traction drive Transport dimensions (L / W / H) Weight of basic machine up to Ø 219 mm / 80 kn / 200 mm 5 kn / 30 m / 6 mm 4,150 / 950 / 2,050 mm 1.98 t Lighting unit with LEDs *) The values stated here may vary depending on soil characteristics. Swivelling flush drill head Cable winch with 5 kn (500 kg) tractive force Clear arrangement of operating elements Mud pump on board 10 11

7 Drill rig B50 High-performance machine for many applications Ideal for depths down to approx. 100 m with drilling diameters of about 200 mm Professional machine for easy transport on a 3.5 t trailer High flushing rate of 80 m³/h at 6.8 bar via the integrated pump Extensive options such as mast lowering, 2-D mast inclination, offset drilling, etc. Characteristics of B50 Flush drilling* Depth: 100 m Diameter: 200 mm Down-the-hole hammer drilling* Depth: 100 m Diameter: 155 mm Dry drilling* Depth: 20 m Diameter: 219 mm Hollow stem auger procedure* Depth: 25 m Diameter: 205 mm Subsoil assessment Probing for unexploded bombs Technical specifications Drive unit (Kubota engine) 4 cylinder / 37 kw / 50 HP diesel Tank capacity 45 l Crawler chassis (telescopic) PT15 Width 780-1,160 mm Leg supports 4 x hydraulic Casing pipe/travel range 2.0 / 2.3 m Feed 15 kn Extraction force 23 kn Feed length 3,000 mm Swivelling geared drill head with continuous 2 1/2" flushing shaft Feed system Hydraulic motor with roller chain down to 100 m! &PULVER lateral rinsing head clearance Drill drive transmission (2-speed; 2-way pivot mechanism) clearance 2 1/2" ABK 800: 80 rpm / 200 danm 2 1/2 Swivelling 1st gear (slow): 56 rpm / 440 danm 2nd gear (fast): 112 rpm / 220 danm Other speeds and torques possible Mud pump Lifting clamp clearance/ lifting force/stroke Offset drilling Hydraulic cable winch: Tractive force/ cable length/cable Ø Mast extension Cable remote control for traction drive Transport dimensions L / W / H 80 m 3 /h bar up to Ø 219 mm / 100 kn / 200 mm 5 kn / 30 m / 6 mm 4,150 / 950 / 2,050 mm Cable winch with cable laying mechanism and mast extension Weight of basic machine 2.28 t *) The values stated here may vary depending on soil characteristics. Lifting clamp and hydraulic pipe rupture clamp Clearly arranged operating unit to control the drill rig 2-speed drill drive with torques up to 620 danm and speeds up to 210 rpm Mud pump on board 12 13

8 Drill rig B50 pro Extremely high extraction force of 5 t due to extra strong mast design Larger chassis and reinforced leg supports Feed system via lift cylinder Extensive options such as mast lowering, 2-D mast inclination and offset drilling available Flush drilling procedure B Series drill rigs make flush drilling much easier. Drilling debris is quickly removed with little effort. Water containing flushing additives suited to the specific soil characteristics circulates in a loop. The additives in the water increase its load carrying capacity and support the bore hole wall. Our B Series allows you to reach great depths even when drilling without a casing. With our products you can achieve drill depths of 100 m and diameters of up to 200 mm! Versatile use Efficient drilling Low noise QR code for product video! down to 100 m! &PULVER Sampling of material from the flush drilling water Rod replacement during flush drilling procedure 2-step flush drill head with swivel-out function on the B

9 Flush drilling procedure Dry drilling procedure QR code for product video! Drilling in livestock shed Easy drill auger control via the control panel Flush drilling with water circuit via a container Due to its compact design, the B50 with dry drilling equipment is also suitable for use in confined spaces Well drilling in a fully landscaped garden Breaker with hydraulic clamp standard feature on all B-Series models Casing pipe disassembly with a crowbar Preventer A magnetic winch supplies drilling accessories during the drilling process Drilling debris removed by the auger The auger is removed by swivelling out the drill head 16 17

10 Down-the-hole-hammer procedure Hollow stem auger procedure This drilling procedure enables you to drive down through hard ground, such as rock, granite and other stones using air and the appropriate down-the-hole-hammer. ADLER offers you down-the-hole-hammer equipment for its B Series. You will achieve outstanding drilling performance when you combine it with a high-performance compressor. Easy to handle Drilling through stone Excellent drilling performance Our B35 and B50 models are ideal for drilling with a hollow stem auger. No flushing fluid is required here either. Are you interested in obtaining high-grade ground samples? If so, the hollow stem auger procedure with our drill rigs is the right solution. In addition, our B Series enables you to set up groundwater measuring points, create pillar foundations and use different systems for sampling. Short set-up time Quick processing High torque despite low operating weight QR code for product video! 4" down-the-hole-hammer with drill crown B50 with down-the-hole-hammer equipment Probing using the hollow stem auger on a pontoon on the River Rhine Easy disassembly of the hollow stem auger due to the swivel-out drill head Lifting clamp with exchangeable jaws Dry drilling with external support casing Control panel for controlling the drill head Drilling with hollow stem auger and universal joint Working with the hollow stem auger Hollow stem auger guided by the lifting clamp 18 19

11 Probing for unexploded bombs Subsoil assessment Even when probing for unexploded bombs, our drill rigs offer you the perfect solution. Dry drilling allows you to create space for soil probes at specific intervals. These can survey areas for signs of unexploded bombs. Experience shows that most unexploded bombs are at a depth of no more than 6 m and are therefore easy to reach with our B Series! In addition to the ADLER B35 and B50 machines, the smaller B25 has also proven to be highly efficient when probing for unexploded bombs. Low transport weight Manoeuvrable and small Great off-road mobility The success of your construction project relies on subsoil assessment based on sampling and probing. Soil exploration drilling provides you with information on rock types and soil qualities on site. Small drilling tasks down to 15 m, pressure probing and soil density assessments by means of superficial percussion probing are possible. Depending on soil characteristics and depth, you may use lightweight or heavy probes for percussion probing. Our B Series delivers a reliable assessment of your construction project in many different ways! The B Series is your universal tool for expert soil assessments. Different test methods Compact Versatile QR code for product video! Percussion core probing using a percussion hammer Probing for unexploded bombs on the River Elbe using the B25. B25 equipped with a percussion probing unit B25 with stacker for auger drills Magazine for test rods Probing auger completely extracted Probing for unexploded bombs during winter Probing for unexploded bombs in Gelsenkirchen at a depth of 6 m B25 drill rig in use pulling cores Placement of the cores in the core box Easy transportation to the site 20 21

12 ABL drill boom attachment The B Series drill rigs impress with a wide variety of accessories and attachments. ADLER drill boom attachments (ABL) have been specifically designed to attach to excavators, transforming them into inexpensive drill rigs. The modular manufacturing concept enables us to produce a customer-specific drill rig by taking a basic unit and adding different attachment modules. We are therefore able to configure an optimal solution for our customers based on the conditions on site and drilling requirements. This ensures great flexibility and a wide variety of different possible uses with customised production and optimum cost efficiency. Wide variety Fast adaptation Adaptation to individual requirements Customised solutions In addition to our sturdy B Series drill rigs, we also offer tailored solutions produced to customer requirements. We thus work directly with you to develop custom-fit solutions. This enables us to sensibly adapt and complement our standard products and offer completely different kinds of product solutions, such as the 3-D ram drill rig. Probing to locate cavities. Drill boom attached to the quickchange mechanism of the excavator 3-D ram drill rig with hydraulic hammer Drill boom attachment with 6.5 m travel on 8 t excavator Drill boom attachment drilling on excavator Hydraulic clamp for drill boom attachment B50 with lowerable mast which can be swivelled sidewards Erecting the ABL drill boom with an excavator System trailer for drill rigs a place for everything Percussion probing unit on the B25 B25 drop hammer for foundation construction 22 23

13 PRODUCING QUALITY. All information in this brochure is based on the best knowledge available to us and has been carefully checked. No liability is accepted. 2016/04 (GB) We reserve the right to modify dimensions, weight and technical data. Conceptual design & layout: ADLER Arbeitsmaschinen GmbH & Co. KG An den Bahngleisen Nordwalde Tel.: +49 (0) 25 73/ Fax: +49 (0) 25 73/

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

Drilling fleet. Capabilities. Agriculture. Water. Environment.

Drilling fleet. Capabilities. Agriculture. Water. Environment. Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function

More information

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling

More information

E08 E10. Compact Excavators

E08 E10. Compact Excavators E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition

More information

Worldwide network in over 40 countries.

Worldwide network in over 40 countries. Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers

More information

AF 280 HYDRAULIC DRILL RIG

AF 280 HYDRAULIC DRILL RIG AF 280 HYDRAULIC DRILL RIG AF 280 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 280 is a drill rig that can easily overcome any kind of problem on the job site, even the most difficult ones.

More information

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable

More information

CHRISTENSEN 140. Surface core drilling rig for medium to large depths

CHRISTENSEN 140. Surface core drilling rig for medium to large depths CHRISTENSEN 140 Surface core drilling rig for medium to large depths GAME CHANGER THE NEW CHRISTENSEN 140 EXPLORATION DRILL RIG FROM ATLAS COPCO CAN BE THE GAME CHANGER YOU NEED. EQUIPPED WITH THIS NEW

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

AF 220 HYDRAULIC DRILL RIG

AF 220 HYDRAULIC DRILL RIG AF 220 HYDRAULIC DRILL RIG AF 220 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 220 is one of the most prestigious machines with great performance. Its success is due to its characteristics

More information

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel

More information

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile dredges catalogue ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB company profile History Dragflow S.r.l. was born at the end of the 1980 s as a manufacturer of heavy duty submersible agitator

More information

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ) 160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all

More information

An expert in all machinery for rock, soil, and groundwater testing operations

An expert in all machinery for rock, soil, and groundwater testing operations An expert in all machinery for rock, soil, and groundwater testing operations Durable rock and soil testing machines for demanding conditions Geomachine is an original equipment manufacturer of rock and

More information

Atlas Copco Exploration Products. Explorac reverse circulation rigs

Atlas Copco Exploration Products. Explorac reverse circulation rigs Atlas Copco Exploration Products Explorac reverse circulation rigs Deep hole exploration with reverse circulation In many cases, exploration drillers have to modify various types of drill rigs in order

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

Feed systems. Effective handling

Feed systems. Effective handling Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of automatic wire processing machines operates at high rates of acceleration and speed. This places maximum demands on

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

Post Pounders & Post Hole Augers

Post Pounders & Post Hole Augers Post Pounders & Post Hole Augers High & Heavy Hitters Side Mast Our most popular model for all heavy and light duty post placement Ability to move sideways a total of 16 Four hammer head mounting positions

More information

Appendix 3: Explanation of different drilling/piling rig uses and specific issues

Appendix 3: Explanation of different drilling/piling rig uses and specific issues Appendix 3: Explanation of different drilling/piling rig uses and specific issues Drill rigs are characterised by high speed rotation of the drill string and drilled holes are rarely greater than 300mm

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

The CLIPPER Solutions

The CLIPPER Solutions The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

EXPORT w w w. k r a n m a n. c o m

EXPORT w w w. k r a n m a n. c o m EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load

More information

AUTOMATIC HYDRAULIC DRILLING RIGS HH Series HH Series hydraulic hoist series The drilling industry is actively involved in developing new technologies to solve common problems, such as increasing safety

More information

Atlas Copco Surface Drill Rig. ROC F9 A powerful 25 kw tophammer combining strength, productivity and hole quality. Hole range 89 127 mm (3½ 5 )

Atlas Copco Surface Drill Rig. ROC F9 A powerful 25 kw tophammer combining strength, productivity and hole quality. Hole range 89 127 mm (3½ 5 ) Atlas Copco Surface Drill Rig ROC F9 A powerful kw tophammer combining strength, productivity and hole quality. Hole range 89 7 mm (½ ) Flexibility and mobility are two important factors for a smooth operation.

More information

1980 to Present Day. 1869 to 1914. 1914 to 1980 DANDO

1980 to Present Day. 1869 to 1914. 1914 to 1980 DANDO 1867 1940 DANDO 1868 1869 to 1914 1896 1914 to 1980 1980 to Present Day r ta n DANDO All rigs are manufactured at our headquarters in West Sussex, England DANDO AND MANUFACTURING Dando are proud of their

More information

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

Raw power. XJR 1300

Raw power. XJR 1300 Raw power The XJR1300 is back as the latest offering in the Sports Heritage Range. 20 years of evolution have delivered a stunning take on the iconic machine. Featuring the largest displacement inline-4

More information

Feed systems. Effective handling

Feed systems. Effective handling Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of wire processing machines allows high rates of acceleration and speed. This feature places big demands on the feeding

More information

HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES

HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com

More information

VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

Valtra A Series Compact and Orchard models A53 / A63 / A73

Valtra A Series Compact and Orchard models A53 / A63 / A73 Valtra A Series Compact and Orchard models A53 / A63 / A73 Full range of tractors in all size classes Individually Yours 2 Valtra is the one and only tractor manufacturer in the Nordic region. Our roots

More information

KUBOTA COMPACT EXCAVATOR KX KX41-3V. Groundbreaking performance. Ultra versatility. Comfort in a compact environment.

KUBOTA COMPACT EXCAVATOR KX KX41-3V. Groundbreaking performance. Ultra versatility. Comfort in a compact environment. R KUBOTA COMPACT EXCAVATOR KX KX41-3V Groundbreaking performance. Ultra versatility. Comfort in a compact environment. Are you ready to be moved? Check out the KX41-3V Compact Excavator from Kubota. Superior

More information

Bauer Jet Grouting Process and Equipment. Process

Bauer Jet Grouting Process and Equipment. Process Bauer Jet Grouting Process and Equipment Process Construction Sequence Bauer Jet Grouting Process During the jet grouting process, the soil surrounding the drill string is eroded by a high energy fluid

More information

Drilling & Piling Attachments. of Sweden

Drilling & Piling Attachments. of Sweden Drilling & Piling Attachments of Sweden General Catalogue 2012 Made in Sweden Blast Hole Drilling MD33 MD45 DM60 Foundation Drilling SPD AB It s with pride and joy I present our company SPD AB. DM85 DM-X

More information

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000

More information

PILING RIGS DRILLING RIGS

PILING RIGS DRILLING RIGS PILING RIGS DRILLING RIGS PRODUCT range An introduction to Dieseko Group Foundation Equipment Established in1974, Dieseko Group represents several brands in the foundation equipment industry, in four product

More information

Crawler and lattice boom cranes from Liebherr Cranes with all the power you need

Crawler and lattice boom cranes from Liebherr Cranes with all the power you need Crawler and lattice boom cranes from Liebherr Cranes with all the power you need Efficient operations with outstanding crane designs 2 Crawler and lattice boom cranes from Liebherr Liebherr cranes are

More information

Cold milling machine W 1000 F. Technical specification

Cold milling machine W 1000 F. Technical specification Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés.

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés. LM 55 UNDERGROUND coring DRill Technical Overview Copyright 2011. Tous droits réservés. LM 55 MODULAR CORE DRILL Copyright 2011. All rights reserved. The LM 55 is a compact underground diamond coring drill

More information

TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH

TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH Outline Field study Lessons learned Rig design changes Mechanization

More information

Atlas Copco Exploration Products. Christensen core drilling rigs

Atlas Copco Exploration Products. Christensen core drilling rigs Atlas Copco Exploration Products Christensen core drilling rigs 2 Christensen exploration drilling rigs user-friendly, durable technology for high productivity Exploration drilling companies are constantly

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length

More information

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3 PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

Born customized. XJR1300 Racer

Born customized. XJR1300 Racer Born customized The XJR1300 is back! 20 years of evolution have delivered a stunning take on the icon. With the largest displacement inline-4 air-cooled engine in the market, the raw power commands respect.

More information

The flexible paver for profitable concrete paving. Slipform paver SP 250

The flexible paver for profitable concrete paving. Slipform paver SP 250 The flexible paver for profitable concrete paving Slipform paver SP 250 Ideal combination options for any specific requirement Modular design, maximum flexibility Whether paving small monolithic profiles,

More information

P 602. This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.

P 602. This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001. This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product

More information

mounted reversible ploughs ploughs packers

mounted reversible ploughs ploughs packers Ploughs mounted reversible ploughs ploughs packers Albatros SUPER-ALBATROS Kormoran Marabu Untergrundpacker Ploughs for all the requirements and conditions of use www.rabe-gb.de Ploughs INHALTSVERZEICHNIS

More information

x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)

x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112

More information

Tesmec S.p.A. Tesmec USA Inc. Headquarters Via Zanica, 17/O Grassobbio (BG) - Italy Tel: Fax:

Tesmec S.p.A. Tesmec USA Inc. Headquarters Via Zanica, 17/O Grassobbio (BG) - Italy Tel: Fax: ROCKSAW 300 COMPACT ROCKSAW TRENCHER MACHINE SPECIALLY DESIGNED FOR FIBER-OPTIC PROJECTS IN URBAN AREAS. THIS MODEL FEATURES AN OFFSET DIGGING BACK-END, TILTING TRACK SYSTEM, AND - AS OPTIONAL- AN AUTOMATIC

More information

Paul Van Buren, superintendent Kanawha Club Manakin Sabot, Virginia

Paul Van Buren, superintendent Kanawha Club Manakin Sabot, Virginia I haven t found another machine of its kind that can do what my Toro Dingo can do. We use our loader every day to move plants, rock and mulch around the course, as well as other tools and materials around

More information

MH 20/25-4 T. Buggie. Compact trucks with 4 wheel drive. Capacity 2000 kg and 2500 kg Overall height: less than 2 metres Semi-Rough-Terrain

MH 20/25-4 T. Buggie. Compact trucks with 4 wheel drive. Capacity 2000 kg and 2500 kg Overall height: less than 2 metres Semi-Rough-Terrain Compact trucks with 4 wheel drive Capacity 2000 kg and 2500 kg Overall height: less than 2 metres Semi-Rough-Terrain MH 20/25-4 T Buggie MH 20/MH 25-4 T Buggie, With the experience of its exclusive innovative

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

Topics of the Presentation

Topics of the Presentation Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents

More information

RH 12.5 RH 16.5. Crawler Excavator Specifications

RH 12.5 RH 16.5. Crawler Excavator Specifications Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic

More information

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range iverbank ngineering CONVEYOR COLLECTION TODAY S PRODUCTS, TOMORROW S ENGINEERING Pallet Handling Conveyors & Conveyor Systems Including: Standard Range Customised Range Riverbank Engineering Ltd Unit 38,

More information

308E CR SB. Mini Hydraulic Excavator with Swing Boom

308E CR SB. Mini Hydraulic Excavator with Swing Boom 308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum

More information

Diesel and gas engine systems for EURO V and EEV on-highway applications

Diesel and gas engine systems for EURO V and EEV on-highway applications Diesel and gas engine systems for EURO V and EEV on-highway applications Mercedes-Benz engines in the 900, 457 and 500 model series. Approved engines for a variety of applications. Our EURO V and EEV engines

More information

Technical Description LR 611 Crawler Loader

Technical Description LR 611 Crawler Loader Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924

More information

JET GROUTING EQUIPMENT CATALOG

JET GROUTING EQUIPMENT CATALOG Your Best Machines JET GROUTING EQUIPMENT CATALOG YBM Co., Ltd. Japan YBM has more than 25 years of experience in manufacturing Jet ing equipment and supplies the construction industry with Your Best Machines

More information

Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE)

Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE) Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE) Nearshore CPT is not as difficult as it might seem. Most CPT companies do already have most of the necessary equipment

More information

soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96

soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96 soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96 96 1.3.1 soil penetrometers tecnotest tecnotest s range of penetrometers Tecnotest manufactures a complete range of static, dynamic

More information

304.5. Mini Hydraulic Excavator

304.5. Mini Hydraulic Excavator 304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator

More information

INSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!

INSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:! In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible

More information

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

SITE DUMPERS PRODUCT RANGE

SITE DUMPERS PRODUCT RANGE SITE DUMPERS PRODUCT RANGE MORE THAN JUST A DUMPER High performance and reliable water cooled diesel engines for smooth and economical operation Large opening service doors for best in class service access

More information

SD t hp

SD t hp Volvo SINGLE drum Compactors SD115 11.8-12.3 t 148-173 hp Powerful performance. The SD115 provides the energy, reliability and strength you need, when you need it. Powerful drum performance enables you

More information

DUPLEX ROLLERS AND TRENCH COMPACTORS. LP range

DUPLEX ROLLERS AND TRENCH COMPACTORS. LP range DUPLEX ROLLERS AND TRENCH COMPACTORS LP range GET IT DONE Customers look to you for great compaction. Our job is to provide equipment that help you deliver. Together we create quality. A customer that

More information

Soil sampling (augers) All it takes for environmental research

Soil sampling (augers) All it takes for environmental research All it takes for environmental research This presentation shows: Aim and typical research purposes Working principles Main products Benefits Remarks Applications User groups 2 Aim of the products: Soil

More information

HR46 HARVESTER. Thinning Specialist

HR46 HARVESTER. Thinning Specialist HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means

More information

8.70 m. Loading and cleaning machine. Technical innovation

8.70 m. Loading and cleaning machine. Technical innovation Class Leaders Loading and cleaning machine Technical innovation Effective cleaning Careful handling of beets Tremendous load-carrying capacity Very high user-safety The euro MAUS has been greatly improved

More information

Technical data Hydraulic lift crane LR 1250

Technical data Hydraulic lift crane LR 1250 Technical data Hydraulic lift crane Complies with ANSI/ASME B 30.5 LR 1250 Serial number 135xxx Dimensions Basic machine with undercarriage R 28 7 11 6 31 10 19 10 9 10 27 1 63 53 15 1 59 24 8 28 7 12

More information

Azimuth thrusters. propulsors

Azimuth thrusters. propulsors Azimuth s Rolls-Royce is a global leader in the supply of azimuth s. In an azimuth the propeller rotates 360 around the vertical axis so the unit provides propulsion, steering and positioning thrust for

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

VOLVO WHEEL LOADERS BLOCK HANDLING

VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially

More information

COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA GEOTHERMAL FIELDS.

COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA GEOTHERMAL FIELDS. Proceedings 5 th African Rift geothermal Conference Arusha, Tanzania, 29-31 October 2014 COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA

More information

Hydraulic Control Solutions

Hydraulic Control Solutions Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district

More information

Portable Compressors MOBILAIR M 270 With the world-renowned SIGMA PROFILE Free air delivery 20.0 to 26.9 m³/min. www.kaeser.com

Portable Compressors MOBILAIR M 270 With the world-renowned SIGMA PROFILE Free air delivery 20.0 to 26.9 m³/min. www.kaeser.com Portable Compressors MOBILAIR M 270 With the world-renowned SIGMA PROFILE Free air delivery 20.0 to 26.9 m³/min www.kaeser.com Made in Germany KAESER s renowned MOBILAIR range of portable compressors is

More information

CRISIS: WORLDWIDE DETERIORATING INFRASTRUCTURE SOLUTION: PIPE BURSTING, PROVEN METHOD OF REPLACEMENT PIPE BURSTING ADVANTAGES:

CRISIS: WORLDWIDE DETERIORATING INFRASTRUCTURE SOLUTION: PIPE BURSTING, PROVEN METHOD OF REPLACEMENT PIPE BURSTING ADVANTAGES: CRISIS: WORLDWIDE DETERIORATING INFRASTRUCTURE THE STATE OF THE INFRASTRUCTURE On an international scale, water, sewer, gas and other utilities are in need of replacement. Most are located in congested

More information

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights 307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800

More information

HC 110. Hydraulic Crawler Crane FEATURES

HC 110. Hydraulic Crawler Crane FEATURES HC 110 Hydraulic Crawler Crane FEATURES 110 tons (100 mt) max lift capacity 230 ft. (70 m) max main boom length 200+70 ft. (61+21 m) max lift crane boom & jib length Power up/down and freefall on main

More information

LIFTING EQUIPMENT. Pallet Trucks 36. Scissor Lifts 38. Electric Platforms 40. Lifters & Stackers 41. Spare Parts 46

LIFTING EQUIPMENT. Pallet Trucks 36. Scissor Lifts 38. Electric Platforms 40. Lifters & Stackers 41. Spare Parts 46 LIFTING EQUIPMENT Pallet Trucks 36 Scissor Lifts 38 Electric Platforms 40 Lifters & Stackers 41 Spare Parts 46 Pallet Trucks AC25 Pallet Truck Entry and Exit Roller prevent physical exertion of the operator

More information

ZAXIS series HYDRAULIC EXCAVATOR

ZAXIS series HYDRAULIC EXCAVATOR ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

303.5C CR Mini Hydraulic Excavator

303.5C CR Mini Hydraulic Excavator 303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab

More information

Agriculture Telescopic Handlers

Agriculture Telescopic Handlers Agriculture Telescopic Handlers 2 At home on the farm Whatever job you re doing on the farm, you can do it quicker and more easily with a Bobcat telescopic handler and the right attachment. Power, versatility,

More information

Rainwater Harvesting

Rainwater Harvesting Rainwater Harvesting With climate change now a reality rather than a speculated possibility, the demand on water resources has gone up, whilst the amount of water available for supply has gone down. Forth

More information