APTUS LAPTOP ARM. Installation Manual

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "APTUS LAPTOP ARM. Installation Manual"

Transcription

1 APTUS LAPTOP ARM Installation Manual APTUS LAPTOP ARM

2 Each system can be attached to an MSC headwall or the building wall. IMPORTANT: If attached to headwall, the APTUS system must be attached to a back-braced monitor channel within a MSC Headwall, Column or Service Module, or a MSC horizontal monitor channel assembly ( or ). If attached to building wall, the wall must be reinforced with bracing to support the APTUS system. WARNING (min/max load): Loads from 4 20 lbs. of applied equipment, including but not limited to: Laptop, mouse, cabling and peripherals. INSTALLATION WARNING: Read the entire instruction sheet before you begin installation or assembly. Installer must verify that the wall will safely support the combined weight of all the attached equipment and hardware. Improper installation of this product can cause extensive property damage or serious personal injury, either during or after the installation. DISCLAIMER: The manufacturer and/or distributor will bear no responsibility for any damages of any kind arising from improper installation of this product. Because wall construction varies widely and the ultimate method of mounting is out of the manufacturer s or distributor s control, it is imperative that the installer consult with local engineering, architectural, or construction personnel to ensure the wall mount is constructed properly and to code to handle the applied load. NOTE: Channel details may differ from illustrations. Figure 1. Parts in Box (monitor channel sold separately) Figure 2. Tools Required Allen Wrenches: 1/4", 3/8", 3/16", 1/8", 5/16" and 5/32" Socket Wrench: 7/16" Drill Bit: 1/8" and 1/2" 2

3 Figure 3a. Complete Arm SITTING MOUNTING HEIGHT: Track: 23" from floor... 1 Keyboard Bottom: 24" from floor... 2 Keyboard Bottom: 38" from floor... 3 SIT/STAND MOUNTING HEIGHT: Track: 26" from floor... 1 Keyboard Bottom: 27" from floor... 2 Keyboard Bottom: 41" from floor... 3 STANDING MOUNTING HEIGHT: Track: 32" from floor... 1 Keyboard Bottom: 33" from floor... 2 Keyboard Bottom: 47" from floor... 3 Figure 3b. Complete Arm with Extensions SITTING MOUNTING HEIGHT: Track: 20" from floor... 1 Keyboard Bottom: 24" from floor... 2 Keyboard Bottom: 38" from floor... 3 SIT/STAND MOUNTING HEIGHT: Track: 23" from floor... 1 Keyboard Bottom: 27" from floor... 2 Keyboard Bottom: 41" from floor... 3 STANDING MOUNTING HEIGHT: Track: 29" from floor... 1 Keyboard Bottom: 33" from floor... 2 Keyboard Bottom: 47" from floor

4 Figure 4. Track Adaptor Installation a. b. Loosen but do not remove 4 bolts in all four corners. Slide Adaptor into desired position. c. Level and tighten bolts. 4

5 Figure 5. Arm Installation a. b. c. WASHER BEARING WASHER TENSION DECREASE 5/16" Allen Wrench TENSION INCREASE 5

6 Figure 6. Laptop Installation a. Pull bar back, put laptop in place. Return bar and secure with lock. Use knob to secure lock nut. Two positions provided for rear lock bar. Figure 7. Cable Management Remove cover underneath arm to allow cable feed, then replace. 6

7 Figure 8. Counterbalance Once all technology is installed, perform the following adjustments to ensure the arm raises and lowers as required, so that it does not freely drift up or drop down. 3/16" Allen Wrench ATTENTION: Arm must be held in the upright position prior to making adjustments. ATTENTION: Turn allen key 2 full turns and test. Make small incremental turns until monitor and keyboard counterbalance. To Increase Friction Tension: Rotate clockwise and test. To Decrease Friction Tension: Rotate counterclockwise and test. Figure 9. Keyboard Tray Angle Adjustment Turn set screw to level keyboard tray (use 1/8" Allen Wrench). 7

8 Figure 10. Arm Leveling Adjustment Remove Plug to adjust Leveling Bolt ATTENTION: Arm must be in the lowest position and swiveled 90 to the track when adjusted. Note: The level has been factory set. Figure 11a. Tension Adjustment-Keyboard Flip NOTE: Keyboard flip tension is PRE-SET. Adjust if required. a. b. Use 3/16" Allen Wrench c. To Adjust: Remove cap to and 7/16" Socket. insert Allen Wrench. Replace Caps. 8

9 Figure 11b. Tension Adjustment-Left to Right Movement a. At the Wall b. Or at the Extension Arm Joint 5/16" Allen Wrench 5/16" Allen Wrench RECOMMENDED FIELD ADJUSTMENT: If any resistance is felt in positioning the laptop tray from the left to the right, please make the following adjustment. 1. Loosen the bolt located under the laptop tray. 2. Re-align the pivot pin installed on the laptop tray plate with the slot on the underside of the mounting system. This may be achieved by simply moving the two joining components slightly forward or back. 3. Tighten the bolt and washers in the appropriate position. Tighten until desired friction is achieved. Do not overtighten. 9

10 OPTIONAL EQUIPMENT ARM EXTENSION Figure 12a. Arm Extension PARTS IN BOX x 1 x 1 x 1 x 2 Figure 12b. Arm Extension Installation a. b. c. WASHER BEARING WASHER TENSION DECREASE 5/16" Allen Wrench TENSION INCREASE d. e. f. WASHER BEARING WASHER TENSION DECREASE 5/16" Allen Wrench TENSION INCREASE 10

11 Figure 13a. Pivot Limiter Installation OPTIONAL EQUIPMENT PIVOT LIMITER Installation direct to adaptor. This is an optional feature to prevent horizontal movement of the APTUS from interfering with other equipment, accessories, the headwall, wall or patient zone. The Pivot Limiter may be set to desired degree of stop and can be used with either standard APTUS configurations or in conjunction with the 18" Extension Arm. Figure 13b. Pivot Limiter Degree of Stop 90 Stop with Extension Arm 90 Stop without Extension Arm 70 Stop of Rotation 50 Stop of Rotation 30 Stop of Rotation 0 Stop of Rotation-Arm locked perpendicular to wall 11

12 OPTIONAL EQUIPMENT CPU CRADLE Figure 14a. CPU Cradle x 2 x 4 PARTS IN BOX x 4 Figure 14b. CPU Cradle Installation a. Slide the CPU Cradle onto the Track. b. T-Nuts must engage edge of track. Tighten fully and test that the CPU Holder remains in place prior to installing any technology. c. Some disassembly may be required to access mounting bolts. d. Assemble and secure all components. 12

13 OPTIONAL EQUIPMENT CPU CABINET Figure 15a. CPU Cabinet 15.74" 12.13" 2.63" 2.50" Figure 15b. CPU Cabinet Installation a. Slide the CPU Cabinet onto the Track. b. T-Nuts must engage edge of track. Tighten fully and test that the CPU Holder remains in place prior to installing any technology. c. Some disassembly may be required to access mounting bolts. d. Assemble and secure all components. 13

14 WARRANTY Modular Services Company warrants that all equipment assemblies shall be free from defects in material and workmanship for a period of 12 months from date of the owner s acceptance to the installing contractor or the date the equipment is put into service, whichever comes first. Warranty excludes electric lamps and/or any material not furnished by Modular Services. Warranty does not cover damage due to improper installation and/or abuse. It is the responsibility of the customer to report any noted product deficiencies to Modular Services immediately upon discovery. It is the responsibility of Modular Services to expediently resolve the discrepancy. Any modification made to the product without the written authorization from Modular Services will void this warranty. Also, in the event product modifications or repairs are made without the written consent of Modular Services, Modular Services shall not be held liable for any cost associated with the modification or repair. There are no warranties of fitness which extend beyond the description on the face hereof Modular Services Company E. Britton Rd. Oklahoma City, OK Tel: Fax: DCN# Rev. 5/2015

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY Owner s Manual LSP16H LS3001 LS3002H LS3003 LSP21H LS3101 LS3102H LS3103 LSP24H LS3201 LS3102H LS3103 LSP28H LS3301 LS3302H LS3303 mainframe bundle H-unit bundle accessory box mainframe bundle H-unit bundle

More information

Small Flat Panel Lift Arm FSA-1004 and KSA-1004

Small Flat Panel Lift Arm FSA-1004 and KSA-1004 I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE NG0M Triple Threat 3-in- Game Table 3 IN GAME TABLE Thank 3 in Y Game Table Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain

More information

ATS Overhead Table Shelf System INSTRUCTION MANUAL

ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System Instruction Manual Warranty Newport Corporation warrants this product to be free of defects in material and workmanship

More information

By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige

By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Prestige IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under

More information

ECM-D70T / ECM-D70T1.5

ECM-D70T / ECM-D70T1.5 Elliptical Ceiling Dual Mount for 37 to 50 Flat Panels INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9531-041-001-01 Contents ECM-D70T / ECM-D70T1.5 Installation Tools... 3 Parts List...

More information

TABLE OF CONTENTS CABINET SAFETY

TABLE OF CONTENTS CABINET SAFETY CABINET SAFETY...2 ASSEMBLY INSTRUCTIONS...3 Tools and Parts...3 Cabinet Use Requirements...3 Unpack the Cabinet...3 TABLE OF CONTENTS CABINET SAFETY Install the Bumper...3 Install the Casters...4 Install

More information

MODEL 5500 Tire Repair Station

MODEL 5500 Tire Repair Station MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 REV110714 P/N: 81-0047F TABLE OF CONTENTS

More information

DSV-2 ALTITUDE-AZIMUTH TELESCOPE MOUNT User Manual

DSV-2 ALTITUDE-AZIMUTH TELESCOPE MOUNT User Manual DSV-2 ALTITUDE-AZIMUTH TELESCOPE MOUNT User Manual Your New Mount Thanks for choosing the Desert Sky Astro Products DSV-2 mount. Take some time to familiarize yourself with its features (Figure 1). Please

More information

Table of Contents. SAFETy INSTALLATIoN PARTS LIST. Parts List and Diagram... 7 Warranty... 8. Safety... 2 Specifications... 3 Installation...

Table of Contents. SAFETy INSTALLATIoN PARTS LIST. Parts List and Diagram... 7 Warranty... 8. Safety... 2 Specifications... 3 Installation... Table of Contents Safety... 2 Specifications... 3 Installation... 4 Parts List and Diagram... 7 Warranty... 8 SAFETy INSTALLATIoN PARTS LIST WARNING SyMBoLS AND DEFINITIoNS This is the safety alert symbol.

More information

Micro Cart User's Guide

Micro Cart User's Guide Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative

More information

Table of Contents WARNING SYMBOLS AND DEFINITIONS

Table of Contents WARNING SYMBOLS AND DEFINITIONS Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...

More information

Installation Guide. Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit

Installation Guide. Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit Installation Guide Philips MX800, MP20/30/40/50/60/70 IntelliVue M-Series Arm Wall Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter. 2. Describe

More information

INSTRUCTION BOOK FOR. Single Monitor Video Conference Cart

INSTRUCTION BOOK FOR. Single Monitor Video Conference Cart INSTRUCTION BOOK FOR Single Monitor Video Conference Cart Procedure 1. Remove contents from cartons and examine for damaged or missing parts. The keys for the cabinet doors are tied to the outside of the

More information

Be Strong. NS 600X. Assembly Manual. Model: NS 600X. P/N: Rev A (09/29/2006)

Be Strong. NS 600X. Assembly Manual. Model: NS 600X. P/N: Rev A (09/29/2006) Be Strong. Assembly Manual NS 600X Model: NS 600X P/N: 00-700 Rev A (09/9/006) TABLE OF CONTENTS Before You Assemble... 3 Product Specifications... Product Features... Parts List / Box Contents... 5 Exploded

More information

Multi-Pitch Pitching Machine USER MANUAL

Multi-Pitch Pitching Machine USER MANUAL Multi-Pitch Pitching Machine USER MANUAL TABLE OF CONTENTS Thank you for purchasing the Cimarron Multi-Pitch Pitching Machine. The Cimarron Multi-Pitch Pitching Machine is a high performance pitching machine

More information

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC

Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC Installation Manual TWM Performance Short Shift Kit 2005 and up Scion TC 1. Unscrew the shift knob by rotating counter clockwise, set it aside for now. 2. Remove the portion of the console with the shift

More information

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors 87-95 Jeep Wrangler IMPORTANT NOTICE: Carefully read instructions before attempting to install this product. Rampage Products

More information

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION Table of Contents SAFETY INSTALLATION OPERATION INSPECTION Specifications... 1 Safety... 2 Installation... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 6 Parts List and Assembly Diagram...

More information

Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications

Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications Lista Shelf Converter Assembly Instructions for Multiple Shelving Applications Table of Contents Safety Check List...2 Existing Shelving Assembly Notes...3 Three Basic Assembled Types...3 Recommended Drawer

More information

EP-550 TM. Inversion Table Assembly Instructions

EP-550 TM. Inversion Table Assembly Instructions TM Inversion Table Assembly Instructions PRE-ASSEMBLY Before you begin: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly

More information

AMF112 (6904-002010 <00>) 13mm (1/2 in.)

AMF112 (6904-002010 <00>) 13mm (1/2 in.) AMF112 () Concrete Wood 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe,

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001 Express5800/120Ed Rack Mount Kit Installation Procedures PN: 455-01607-001 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve

More information

Structural Holding System

Structural Holding System Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies

More information

U-Step II Walking Stabilizer

U-Step II Walking Stabilizer Step-by-Step Guide to Using Your U-Step II Walking Stabilizer Adjustable backrest Hand brake Comfort grips Ergonomically positioned handlebars Padded seat Height adjustable Removable basket Spring-loaded

More information

Unpacking, Installation, and Customization

Unpacking, Installation, and Customization Unpacking, Installation, and Customization NetShelter WX Enclosure AR100 AR100HD Contents Unpacking... 1 How to Unpack the Enclosure............................... 1 Please Recycle..........................................

More information

INSTRUCTION BOOK FOR. Dual Monitor Video Conferencing Cart

INSTRUCTION BOOK FOR. Dual Monitor Video Conferencing Cart INSTRUCTION BOOK FOR Dual Monitor Video Conferencing Cart Procedure 1. Remove contents from cartons and examine for damaged or missing parts. The keys for the cabinet doors are tied to the outside of the

More information

AMF112 Instruction Manual

AMF112 Instruction Manual AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520

More information

Q24 5th Wheel. Instruction manual

Q24 5th Wheel. Instruction manual Q24 5th Wheel Instruction manual Installer: read and understand this manual. Fully instruct and demonstrate the operation of this 5th wheel hitch to the end user. Include the importance of observing all

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Youngman Telescopic Loft Ladder

Youngman Telescopic Loft Ladder Use and Care Instructions: Youngman Telescopic Loft Ladder Models: 2.6m and 2.9m Safety Please ensure you read the Safety section in this manual starting on page 3 before installing or using the equipment.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PARTS REQUIRED Single QuickStand Parts A (1) QuickStand Unit B (1) Base Plate C (1) Platform D (1) Palm Support E (1) VESA Plate F (6) M8 x 18 mm Flat Head Machine Screws G (4)

More information

1000-LB. TRAILER JACK OWNER S MANUAL

1000-LB. TRAILER JACK OWNER S MANUAL 1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

ROTOR LOADER OWNER S MANUAL

ROTOR LOADER OWNER S MANUAL ROTOR LOADER OWNER S MANUAL ROTOR LOADER OWNER S MANUAL WARNING IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES. Misuse of paintball equipment may cause serious injury or death. QUICK SET-UP GUIDE BATTERY

More information

Installation Instructions HighRock 4x4 TM

Installation Instructions HighRock 4x4 TM Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep YJ and TJ Wrangler 1986 2006 Part Number: 49312 www.bestop.com - We re here to help! Visit our web site and click on Ask

More information

MEC Auto-Mate Assembly Manual. For MEC 9000G/GN and 8567 Grabber Series

MEC Auto-Mate Assembly Manual. For MEC 9000G/GN and 8567 Grabber Series MEC Auto-Mate Assembly Manual For MEC 9000G/GN and 8567 Grabber Series Thank you We really appreciate your support of our product line. But our commitment to you hardly ends here. We won't be satisfied

More information

758 Heavy-duty Ratchet Guy Wire Cutter

758 Heavy-duty Ratchet Guy Wire Cutter INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product

More information

Instructions and precautions. Fork Height. Visit our website at: http://www.harborfreight.com

Instructions and precautions. Fork Height. Visit our website at: http://www.harborfreight.com Pallet Jack Item 68760 / 68761 Instructions and precautions Specifications Capacity Control Lever Fork Height Fork Length Fork Width Maximum Minimum Width over Forks Steering Wheel Dia. 2-1/2 Ton (5,000

More information

Chapter 3 Assembling the Storage Ladder

Chapter 3 Assembling the Storage Ladder Chapter 3 Assembling the Storage Ladder This chapter provides step-by-step instructions for assembling and attaching the Safety Ladder to the Storage Wall. General Information The Lista Safety Ladder provides

More information

National Optical & Scientific Instrument Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104

National Optical & Scientific Instrument Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104 National Optical & Scientific Instrument Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104 INSTRUCTIONS FOR STEREOSCOPIC MICROSCOPES MODEL NUMBERS 400 400TL

More information

C3-DT. Desktop Cycle. Owners Manual. For safe use and product knowledge, please completely read this Product OWNERS MANUAL. v. 1.0

C3-DT. Desktop Cycle. Owners Manual. For safe use and product knowledge, please completely read this Product OWNERS MANUAL. v. 1.0 C3-DT Desktop Cycle Owners Manual For safe use and product knowledge, please completely read this Product OWNERS MANUAL. v. 1.0 C3-DT Desktop Cycle desktop cycle cycle desktop cycle desktop cycle desktop

More information

EZ Way Stand Aid 400 lb. Capacity Operator s Instructions

EZ Way Stand Aid 400 lb. Capacity Operator s Instructions EZ Way Stand Aid 400 lb. Capacity Operator s Instructions EZ Way, Inc. PO Box 89 Clarinda, IA 563-800-67-8940 www.ezlifts.com Form -98 Rev. 3//4 The affordable, durable EZ Way Stand Aid actively engages

More information

AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech

AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual

More information

Owner s Manual Read and keep this manual. Patents World Wide

Owner s Manual Read and keep this manual. Patents World Wide Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist

More information

Chevy SuperRail Mounting Kit #3345

Chevy SuperRail Mounting Kit #3345 Chevy SuperRail Mounting Kit #3345 #4100 SuperGlide (16K) #4400 SuperGlide (18K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)

More information

Flat Bottom Long Ram Hydraulic Jack

Flat Bottom Long Ram Hydraulic Jack Flat Bottom Long Ram Hydraulic Jack 3 Ton 8 Ton 36468 36469 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS

More information

Model A Turn Signal Kit Installation Guide

Model A Turn Signal Kit Installation Guide Model A Turn Signal Kit Installation Guide Consumer Hot Line: 888-471-LOGO 770-476-7322 In Atlanta, GA http://www.logolites.com P/N: 100-005/G 2003 3407 Hwy. 120 Duluth, GA 30096, USA Logo Lites and the

More information

MP-4V Heavy Duty Riveter / 39048

MP-4V Heavy Duty Riveter / 39048 MP-4V Heavy Duty Riveter / 39048 This newly designed heavy-duty air/hydraulic riveter is ergonomically designed with the professional in mind. The light weight 3.7 lbs. well balanced MP-4V includes a Vacuum

More information

INSTRUCTION MANUAL Kwik Slide

INSTRUCTION MANUAL Kwik Slide INSTRUCTION MANUAL Kwik Slide PLYMOUTH, MI FOR USE WITH 30048 DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate sliding procedures in this Manual to end user. (3) Have end

More information

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.

More information

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT

FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT -J070 REV. 0-0-0 FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT GENERAL Kit Number 9-09A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

Slim Desk Mount Articulating Monitor Arm with Cable Management

Slim Desk Mount Articulating Monitor Arm with Cable Management Slim Desk Mount Articulating Monitor Arm with Cable Management ARMSLIM *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía

More information

INSTRUCTIONS: LocknCharge Laptop Carts

INSTRUCTIONS: LocknCharge Laptop Carts INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes

More information

Calvert USA, Inc. Attic Stairs

Calvert USA, Inc. Attic Stairs Calvert USA, Inc. Attic Stairs Instructions for installation of vertical opening access stairs Model numbers: 7035 through 7047 Calvert USA, Inc., P.O. Box 841, Solomons, MD 20688, Tel. (410) 286-1430,

More information

RZ Guardrail System Installation Manual

RZ Guardrail System Installation Manual TM RZ Guardrail System Installation Manual RZ Guardrail System Compliance is based on OSHA standards: (Standards - 29 CFR) 1910.23 (e) and (Standards - 29 CFR) 1926.502 (b) Failure to read, understand

More information

KDT916 - Watts Link - Complete Assembly

KDT916 - Watts Link - Complete Assembly KDT916 - Watts Link - Complete Assembly Please read all instructions carefully prior to installation and verify all kit contents and tools are on hand prior to installation. Professional Installation by

More information

SteelWood INSTALLATION GUIDE. By SP Partners, LLC. Read instructions carefully and completely before beginning installation.

SteelWood INSTALLATION GUIDE. By SP Partners, LLC. Read instructions carefully and completely before beginning installation. INSTALLATION GUIDE SteelWood By SP Partners, LLC www.rainbowatticstair.com Read instructions carefully and completely before beginning installation. WARNING This stairway is for residential use only. Maximum

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Installing the Cart Garage Frame and Flush Door

Installing the Cart Garage Frame and Flush Door General Information: The following provides step-by-step instructions for assembling and installing the Automotive Cart Garage Frame and Door under a work surface. The finished assembly will consist of

More information

VUEPOINT. Assembly Instructions for Model: HTBSW

VUEPOINT. Assembly Instructions for Model: HTBSW VUEPOINT ssembly Instructions for Model: HTSW Thank you for choosing a VUEPOINT HTSW. The HTSW consists of two Stands and three Wall Mounts. The HTSW Wall Mount ssembly Instructions are covered in Section

More information

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,

More information

LCI B R T C OWNER'S MANUAL. Rev: 09.25.2014 Page 1 Bike Rack and Tire Carrier Owner's Manual

LCI B R T C OWNER'S MANUAL. Rev: 09.25.2014 Page 1 Bike Rack and Tire Carrier Owner's Manual LCI B R T C OWNER'S MANUAL Rev: 09.25.2014 Page 1 Bike Rack and Tire Carrier Owner's Manual TABLE OF CONTENTS System 2 Description 2 Prior To Operation 3 Manual Slide-Out Bike Rack Operation 3 Bike Rack

More information

Mobile / Folding Power Tool Stand

Mobile / Folding Power Tool Stand Mobile / Folding Power Tool Stand 40612 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

User Manual. Instructions for installing the Sure Stitch on the Next Generation Quilting Frame. Parts Included:

User Manual. Instructions for installing the Sure Stitch on the Next Generation Quilting Frame. Parts Included: User Manual Instructions for installing the Sure Stitch on the Next Generation Quilting Frame. Parts Included: 1: Display Console 1: Control Box 2: Encoder (Wires attached) (Not Shown) 1: 5v Power Supply

More information

CBT 200LA-1 Assembly & Bracket Installation Guide INCLUDED:

CBT 200LA-1 Assembly & Bracket Installation Guide INCLUDED: CBT 200LA-1 & Bracket Installation Guide INCLUDED: Top Speaker Module Bottom Speaker Module Coupler Plate Speaker Bracket Swivel-Tilt Wall Bracket M6-34L M6-12L SS Flatwashers M6-20L Flat head M6-Nuts

More information

Rollator Cane and Brake Replacement SAFETY SUMMARY (CONTINUED)

Rollator Cane and Brake Replacement SAFETY SUMMARY (CONTINUED) Rollator Cane and Replacement Assembly, Installation and Operating Instructions SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact Carrier/Dealer

More information

Chainsaw Chain Breaker / Spinner

Chainsaw Chain Breaker / Spinner Chainsaw Chain Breaker / Spinner Model 99835 Assembly, Operating, and Maintenance Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product

More information

JANUS INTERNATIONAL CORPORATION INSTALLATION INSTRUCTIONS Pantheon Mini Operator

JANUS INTERNATIONAL CORPORATION INSTALLATION INSTRUCTIONS Pantheon Mini Operator JANUS INTERNATIONAL CORPORATION INSTALLATION INSTRUCTIONS Pantheon Mini Operator The Janus Pantheon mini operator does not typically require the provision of any additional site requirements other than

More information

Seismic Installation for Attic Storage System

Seismic Installation for Attic Storage System Your Performance Partner Seismic Installation for Storage System CONTENTS SSafety Precautions................................. 2 Required Tools..................................... 2 Parts and Fastener

More information

Digital Anemometer PRODUCT MANUAL

Digital Anemometer PRODUCT MANUAL Digital Anemometer PRODUCT MANUAL Item # 3305ADD 2 CONTENTS Specifications 2 Components/Hardware 3 Tools and Materials Needed 4 Attaching the Wind Cups 4 Choosing the Best Anemometer Location 5 Orienting

More information

Bunk Bed Assembly Instructions

Bunk Bed Assembly Instructions Bunk Bed Assembly Instructions Thank you for your purchase of a smartstuff bunk bed. smartstuff bunk beds are designed, engineered and certified to meet the safety guidelines of the Consumer Product Safety

More information

Pontoon and Tri-Toon Bunk Assembly Instructions

Pontoon and Tri-Toon Bunk Assembly Instructions Pontoon and Tri-Toon Bunk Assembly Instructions INTRODUCTION The Starr line of Boat Lift Canopy Frames by Great Lakes Entry Systems has been engineered to provide the best possible performance, long term

More information

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair SERVICE MANUAL US Corpus 3G Seat system for electric wheelchair How to contact Permobil Head Office of the Permobil group Produced and published by Permobil AB, Sweden Version 4, 2014-07 Item No.: 205260-US-0

More information

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...

More information

CETAC Z-Drive Assembly

CETAC Z-Drive Assembly CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your

More information

OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH

OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH OPERATING INSTRUCTIONS Reese Elite Series FIFTH WHEEL SLIDER HITCH DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching procedures in this Manual to

More information

AZEK Rail Install Guide

AZEK Rail Install Guide TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail

More information

FLATBED TRAILER WITH ATV TIRES

FLATBED TRAILER WITH ATV TIRES FLATBED TRAILER WITH ATV TIRES Model 47845 ASSEMBLY and OPERATING INSTRUCTIONS Note: Wooden stake panels are not included. Wooden Stake Kit, #40041 is sold separately. Flatbed Trailer is for off-road use

More information

Installation Instructions for DCI Edge Over the Patient Delivery System

Installation Instructions for DCI Edge Over the Patient Delivery System Table of Contents Page Unit Installation Notes 2 Post Wall/Cabinet Mount Installation 3 Delivery System Installation 3 Self Contained Water System Installation 4 Self Contained Water System Schematic 5

More information

1-800-295-5510 uline.com SPECIFICATIONS

1-800-295-5510 uline.com SPECIFICATIONS H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs

More information

The Z-Bot Power Draw Bar

The Z-Bot Power Draw Bar The premier source of tooling, parts, and accessories for bench top machinists. The Z-Bot Power Draw Bar The Z-bot Power Draw Bar for mini mills is designed to work with the popular Tormach tooling system.

More information

Fundamental Assembly Instructions

Fundamental Assembly Instructions Fundamental Assembly Instructions 1998757 Revision A-11 Complete Series Master Packet 2008 Kimball International, Inc. T 800.482.1818 F 812.482.8300 Footprint Storage and Metal Filing Systems Assembly

More information

2014+ Mazda 3/6 Shift Knob Installation Instructions

2014+ Mazda 3/6 Shift Knob Installation Instructions Page1 James Barone Racing Aftermarket Parts and Accessories 2014+ Mazda 3/6 Shift Knob Installation Instructions What you will need: Your hands 15mm deep socket Socket wrench Ok let s get started. 1. Remove

More information

RadianceRail Installation Guide

RadianceRail Installation Guide RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10

More information

User Instruction Manual First-Man-Up Remote Anchorage Connector System

User Instruction Manual First-Man-Up Remote Anchorage Connector System User Instruction Manual First-Man-Up Remote Anchorage Connector System This manual is intended to meet the Manufacturer s Instructions as required by ANSI Z359.1-1992 and ANSI A10.14-1991, and should be

More information

Hydraulic Transmission Jacks Operating Instructions & Parts Manual

Hydraulic Transmission Jacks Operating Instructions & Parts Manual Blackhawk Automotive is a Licensed Trade Mark Made by SFA Companies, Kansas City, MO Hydraulic Transmission Jacks Operating Instructions & Parts Manual Model BH7011 BH7210 Capacity 1/2 Ton 1 Ton SFA Companies

More information

KEEP FOR FUTURE REFERENCE MRTALP VERTICAL LIFT BAR READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT

KEEP FOR FUTURE REFERENCE MRTALP VERTICAL LIFT BAR READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT KEEP FOR FUTURE REFERENCE INSTRUCTIONS P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 International Version MODEL NUMBER: LB10VLB MRTALP VERTICAL

More information

LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963

LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports 972-429-1963 Thank you for purchasing LG Motorsports products for your Gen 5 Camaro. Parts Inventory:

More information

Original Assembly Guide

Original Assembly Guide TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this

More information

3500 lb. capacity Electric trailer jack

3500 lb. capacity Electric trailer jack 3500 lb. capacity Electric trailer jack 67597 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

HYDRAULIC LIFT TABLE CART 2200-LB.

HYDRAULIC LIFT TABLE CART 2200-LB. HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

ASSEMBLY INSTRUCTIONS Residential Roof solutions

ASSEMBLY INSTRUCTIONS Residential Roof solutions ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS

More information

SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE

SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop

More information

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna) Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated

More information