2015 Parts Manual Phone: (306)
|
|
|
- Stuart Robertson
- 7 years ago
- Views:
Transcription
1 2015 Parts Manual Phone: (306) Toll Free: Fax: (306) Replacement Cost $29.95 CAD
2
3 Table of Contents 2 Standard Opener 4 Mirrored Opener FRAME 6 Front Hitch - Standard & M-Fold 8 Frame Connections 10 M80/90/100 Fifth Fold Links M50/60/70/80CT Fifth Fold Links Active Wing Brace WHEELS 16 Heavy Dual Castor Bundle 18 Rear Walking Axle 20 Single Castor Assembly 22 Dual Wing Castor Assembly 24 Rear Wing Axle 26 Rear Wing Castor Assembly OPTIONS 28 Rear Hitch Packages 30 Opener Force Sensor Bundle 32 Smart Hitch Sensor Bundle - Hall Effect Sensor Style 34 Lift Kit Bundles 36 Clearance Light Mount 37 Wheel & Hubs and Cylinders HYDRAULIC SCHEMATICS 38 Hydraulic Block 40 Smart Openers Hydraulic Manifold 41 Opener 42 M-Fold Opener 43 Opener Lock Up 44 STD 3-Plex Wing Fold 45 Wide 3-Plex Wing Fold 46 STD 5-Plex Wing Fold 47 M Wing Fold 48 Smart Hitch 49 Lift Kit WIRING SCHEMATICS 50 Cruizer II In-Cab Kit 51 Viper Control In-Cab Kit 52 Toolbar Functions w/ SmartOpeners 53 Toolbar Functions w/ Auto Lift 54 Smart Hitch Node & Cabling 55 Clearance Light
4 2 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 1/2 X 2 1/4 IN GR5 PL BOLT, HEX 5/8 X 3 3/4 UNC GR8 PL BOLT, HEX 3/4 X 2 1/2 UNC GR5 PL BOLT, HEX 3/4 X 2 3/4 UNC GR5 PL BOLT, HEX 3/4 X 4 UNC GR5 PL BOLT, HEX 3/4 X 3 1/4 UNC GR5 PL BOLT, HEX 3/4 X 4 1/4 UNC GR5 PL BOLT, CARRIAGE - 3/8 X 1 1/2IN UND GR5 PL BOLT, CARRIAGE - 3/8 X 1 1/4 IN UNC GR5 PL BOLT, CARRIAGE - 3/4 X 2 IN UNC GR5 PL BOLT, CARRIAGE - 1/2 X 1 1/2IN UNC GR5 PL NUT, FLANGE - 3/8 UNC PL NUT, FLANGE - 1/2 UNC PL NUT, HEX 3/4 UNC GR5 PL NUT, LOCK 5/8 UNC - STOVER - PL NUT, LOCK - 3/4 UNC - STOVER - PL WASHER, FLAT 5/8 IN GR8 PL WASHER, FLAT 3/4 IN PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT - 1/2 IN - GR8 - PL BUSH, 1 1/2OD X 1 1/4ID X 7/8 IN - CONNEX BUSH, 1 1/2OD X 1 1/4ID X 1 1/8 IN - CONNEX ASSY, TIRE X 8 - CARLISLE CLAMP, GEAR - S/S - 1 IN - HAS CYL, HYD 1 3/4 X 4 IN - OPENER ASSY, HANGER - OPENER - CTR - YEL ASSY, FERT KNIFE - EXTENDED WEAR - BLK ASSY, SEED KNIFE - EXTENDED WEAR - BLK BUSH, PIVOT SPACER 1 1/4OD X.77ID X 1.25 IN HOSE, CONNECTOR - SEED KNIFE - 1 1/4 IN PLATE, ARM 3/4 IN - MAIN - YEL PLATE, CLAMP 5/8IN - UHMW HOLDER - YEL PAD, WEAR 1/4 IN - UHMW PLATE, FERT TRIP 1/2IN - YEL WASHER, TRIP 1/4 IN - UHMW PLATE, TRIP WASHER 5/8 IN - YEL SHEET, FRMD 10 GA - RESIDUE DEFLECTOR - STAINLESS PLATE, SEED KNIFE HOLDER - YEL BUSH, CYL SPACER 1.4 OD X.77ID X.9 IN FORMED PACKER ARM PLATE, DEPTH ADJ 1/2 IN - OPENER - YEL BEARING, BALL - BEI RS BUSH, SPACER - INNER - PACKER HUB BUSH, SPACER - OUTER - PACKER HUB HUB, PACKER WHEEL - CASTING PLATE, PACKER WHEEL-CAST-YEL-C/W STUDS & NUTS Parts Description: Standard Opener Used on Left side of Toolbar Part No
5 **1 /16"** FROM CENTER LINE OF PLATE TO CENTER LINE OF SEED TUBE TIRE-IN-TIRE OPTION PART #: OPTIONAL: BDL, NH3 DROP TUBE BDL, LIQUID DROP TUBE PACKER HUB BUNDLE OPENER BUNDLES: LEFT HAND STANDARD RIGHT HAND STANDARD OPENER HANGING BRACKET FORMED ARM IS COMPATIBLE WITH STRAIGHT ARM, BUT USES SHORTER BOLTS AS SHOWN PART # 4006 LEFT HAND PART # RIGHT HAND
6 4 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 1/2 X 2 1/4 IN GR5 PL BOLT, HEX 5/8 X 3 3/4 UNC GR8 PL BOLT, HEX 3/4 X 2 1/2 UNC GR5 PL BOLT, HEX 3/4 X 2 3/4 UNC GR5 PL BOLT, HEX 3/4 X 4 UNC GR5 PL BOLT, HEX 3/4 X 3 1/4 UNC GR5 PL BOLT, HEX 3/4 X 4 1/4 UNC GR5 PL BOLT, CARRIAGE - 3/8 X 1 1/2IN UND GR5 PL BOLT, CARRIAGE - 3/8 X 1 1/4 IN UNC GR5 PL BOLT, CARRIAGE - 3/4 X 2 IN UNC GR5 PL BOLT, CARRIAGE - 1/2 X 1 1/2IN UNC GR5 PL NUT, FLANGE - 3/8 UNC PL NUT, FLANGE - 1/2 UNC PL NUT, HEX 3/4 UNC GR5 PL NUT, LOCK 5/8 UNC - STOVER - PL NUT, LOCK - 3/4 UNC - STOVER - PL WASHER, FLAT 5/8 IN GR8 PL WASHER, FLAT 3/4 IN PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT - 1/2 IN - GR8 - PL BUSH, 1 1/2OD X 1 1/4ID X 7/8 IN - CONNEX BUSH, 1 1/2OD X 1 1/4ID X 1 1/8 IN - CONNEX ASSY, TIRE X 8 - CARLISLE CLAMP, GEAR - S/S - 1 IN - HAS CYL, HYD 1 3/4 X 4 IN - OPENER ASSY, HANGER - OPENER - CTR - YEL ASSY, FERT KNIFE - EXTENDED WEAR - BLK ASSY, SEED KNIFE - EXT WEAR MIRROR - BLK BUSH, PIVOT SPACER 1 1/4OD X.77ID X 1.25 IN HOSE, CONNECTOR - SEED KNIFE - 1 1/4 IN PLATE, ARM 3/4 IN - MAIN - YEL PLATE, CLAMP 5/8IN - UHMW HOLDER - YEL PAD, WEAR 1/4 IN - UHMW PLATE, FERT TRIP 1/2IN - YEL WASHER, TRIP 1/4 IN - UHMW PLATE, TRIP WASHER 5/8 IN - YEL PLATE, SEED KNIFE HOLDER - YEL BUSH, CYL SPACER 1.4 OD X.77ID X.9 IN PLATE, FRMD 10GA S.S. - DEFLECTOR MIRROR FORMED PACKER ARM PLATE, DEPTH ADJ 1/2 IN - OPENER - YEL HUB, PACKER WHEEL - CASTING BEARING, BALL - BEI RS BUSH, SPACER - INNER - PACKER HUB BUSH, SPACER - OUTER - PACKER HUB PLATE, PACKER WHEEL-CAST-YEL-C/W STUDS & NUTS Parts Description: Mirrored Opener Used on Right side of Toolbar Part No
7 5 17 **1 /16"** FROM CENTER LINE OF PLATE TO CENTER LINE SEED TUBE FORMED ARM IS COMPATIBLE WITH STRAIGHT ARM, BUT USES SHORTER BOLTS AS SHOWN OPTIONAL: BDL, NH3 DROP TUBE BDL, LIQUID DROP TUBE PACKER HUB BUNDLE OPENER BUNDLES: LEFT HAND MIRRORED RIGHT HAND MIRRORED OPENER HANGING BRACKET TIRE-IN-TIRE OPTION PART #: PART # 4006 LEFT HAND PART # RIGHT HAND
8 6 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 3/4 X 2 1/2 UNC GR5 PL BOLT, HEX 7/8 X 2 1/2 UNC GR5 PL BOLT, HEX 3/8 X 4 1/2 IN UNC GR5 PL BOLT, HEX 1 X 4 IN UNC GR5 PL BOLT, HEX 1/2 X 3 1/2 IN UNC GR5 PL BOLT, CARRIAGE - 5/16 X 3/4 IN UNC GR5 PL BOLT, U-SQ - 3/4 UNC X 4 ID X 6 IN - 2 IN THD - GR5 PL BOLT, U-SQ - 1/2 UNC X 4 ID X 5 IN - 2 IN THD - GR8 PL NUT, FLANGE - 1/2 UNC PL NUT, FLANGE - 5/16 UNC PL NUT, HEX 1/2 UNC GR5 PL NUT, HEX 3/4 UNC GR5 PL NUT, HEX - 7/8 UNC PL NUT, HEX 1 UNC GR5 PL NUT, LOCK - 1/2 UNC - STOVER - PL NUT, LOCK - 3/8 UNC - STOVER - PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT 7/8IN GR8 PL WASHER, FLAT - 1 IN GR8 PL WASHER, FLAT - 1/2 IN - PL WASHER, FLAT - 3/8 IN GR8 PL PIN, SPRING - 5/16 X 2 1/2 IN - PL HITCH JACK LB - SIDE WIND - W/OUTER BUSHING SAFETY CHAIN, GR70 X 6 FT LB ASSY, HOSE HOLDER - FRT HITCH - BLK PLATE, CLAMP 3/8 IN ASSY, HINGE PIN - SEED MASTER - BLK ASSY, SIDE A-FRAME HITCH ASSY, FRT TONGUE - SMART HITCH ASSY, MIDDLE CROSS TUBE - SMART HITCH ASSY, FRONT PIVOT PLATE - SMART HITCH - YEL ADJUSTABLE JACK PLATE PLATE, 1/4 IN HOSE HOLDER U-BOLT TAB SHEET, 10 GA FRMD BACK HOSE HOLDER - OPEN SHEET, FRMD GA - HOSE HOLDER STRAP - BLK Parts Description: Front Hitch Bundle Part No Standard Hitch M-Fold Hitch
9 M FOLD HITCH M - FOLD HITCH - PART # (SUBSTITUTE ITEMS BELOW) ITEM QTY. PART NO. DESCRIPTION ASSY, SIDE A-FRAME SMART HITCH CROSS TUBE ASSY SHEET, 10 GA FRMD BACK HOSE HOLDER - OPEN STANDARD HITCH CYLINDERS INCLUDED WITH SMART HITCH SENSOR BUNDLE PART #
10 8 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 7/8 X 2 1/4 UNC GR5 PL WASHER, FLAT 7/8IN GR8 PL NUT, HEX - 7/8 UNC PL BOLT, HEX 3/4 X 2 1/2 UNC GR5 PL BOLT, HEX 3/4 X 6 1/2 UNC GR5 PL BOLT, U-SQ - 3/4 UNC X 8 ID X 8 IN - 2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 4 ID X 8 IN -2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 4 ID X 10 IN - 2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 8 ID X 6 IN - 2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 6 ID X 6 IN - 2 IN THD - GR8 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL BOLT, U-SQ - 1/2 UNC X 4 ID X 8 IN - 2 IN THD - GR5 PL WASHER, FLAT - 1/2 IN - GR8 - PL NUT, HEX 1/2 UNC GR5 PL ASSY, HINGE PIN - SEED MASTER - BLK BOLT, HEX 1/2 X 3 1/2 IN UNC GR5 PL NUT, LOCK - 1/2 UNC - STOVER - PL Parts Description: Frame Connections
11 OPENER TO RANK CONNECTION 1 RAIL TO BEAM CONNECTION 15 RANK TO MAIN RAIL CONNECTION 15 RANK TO WING RAIL CONNECTION HINGE PIN CONNECTION ANGLE BRACKET TO RAIL CONNECTION ANGLE BRACKET TO BEAM CONNECTION RANK SUPPORT CONNECTION 1 (IF SUPPORTS DO NOT LINE UP USE RANK SUPPORT CONNECTION 2) RANK SUPPORT CONNECTION REAR BEAM MAY REQUIRE /4 X 8ID X 10 MAIN WING STOP TO RAIL SIDE CONNECTION FIFTH FOLD WING STOP TO RAIL TOP CONNECTION FIFTH FOLD WING STOP TO BEAM CONNECTION MAIN WING STOP TO BEAM CONNECTION
12 10 ITEM QTY. PART NO. DESCRIPTION ASSY, HINGE LINK - MAIN - RH - BLK ASSY, HINGE LINK - LIFT - RH - BLK ASSY, HINGE LINK - MAIN - LH - BLK ASSY, HINGE LIFT LINK - 13" - LH ASSY, HINGE PIN - 2 IN - BLK ASSY, LINK PIN - 1 1/2" X 3 3/8" BUSH, LINK SPACER 1 1/2 OD X.77ID X 7IN PIN, COILED SPRING - 3/8 X 3 IN - PL BOLT, HEX 3/4 X 10 UNC GR5 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL ASSY, BEAM - MAIN WING - RH - M80 TXB - BLK ASSY, BEAM - FIFTH FOLD - M80 - BLK Parts Description: M80/90/100 Fifth Fold Links
13 MAIN MAIN WING FIFTH FOLD FIFTH FOLD
14 ITEM QTY. PART NO. DESCRIPTION ASSY, HINGE LINK - M70 LIFT - LH - BLK ASSY, HINGE LINK - M70 LIFT - RH - BLK ASSY, HINGE LINK - M /2" - MAIN - LH - BLK ASSY, HINGE LINK - M70 - MAIN - RH - BLK ASSY, HINGE PIN - 2 IN - BLK ASSY, LINK PIN - 1 1/2" X 3 3/8" BUSH, LINK SPACER 1 1/2 OD X.77ID X 7IN PIN, COILED SPRING - 3/8 X 3 IN - PL BOLT, HEX 3/4 X 10 UNC GR5 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL Parts Description: M50/60/70/80CT Fifth Fold Links
15 M70/M80CT USES 2 CYLINDERS USES 2 CYLINDERS MAIN WING FIFTH FOLD
16 ITEM QTY. PART NO. DESCRIPTION ASSY, BOLT PLATE - RIGHT ADJUSTABLE ACTIVE WING BRACE - BLK PLATE, LINK 1/2 IN - ACTIVE WING BRACE ASSY, ADJUSTABLE ACTIVE WING BRACE TUBE BLK CYL, HYD 2 1/2 X 8 IN ASSY, LUG - ADJUSTABLE ACTIVE WING BRACE - BLK BOLT, HEX 7/8 X 3 IN UNC GR5 PL WASHER, FLAT 7/8IN GR8 PL NUT, HEX - 7/8 UNC PL BOLT, HEX 1 X 3 1/2 IN GR5 PL WASHER, FLAT - 1 IN GR8 PL NUT, LOCK - 1 UNC - STOVER - PL NUT, HEX 1 UNC GR5 PL Parts Description: Active Wing Brace SUBSTITUTE FOR ITEMS 3 & 4 ACCORDING TO TABLE BELOW FRAME MAIN WING BRACE FIFTH FOLD WING BRACE BRACE TUBE CYLINDER BRACE TUBE CYLINDER WIDE 3-PLEX STD 5-PLEX CT 3-PLEX M M M M80CT M M M
17 RH LH RH LH
18 16 ITEM QTY. PART NO. DESCRIPTION ASSY, DUAL CASTOR - WALKING - HEAVY - BLK ASSY, TIRE -.5L15F1 - HWY SRV - PLY - 8 BOLT PAD, WEAR 1/4 IN - NYLON - BOTTOM PAD, WEAR 1/4 IN - NYLON TOP ASSY, HUB/SPINDLE - H8-2 1/8 IN STRAIGHT SPINDLE ASSY, SPINDLE HOLDER - WALKING AXLE - 15/ BLK ASSY, PIVOT PIN WALKING AXLE - SEEDMASTER BOLT, HEX 1/2 X 3 1/2 IN UNC GR5 PL NUT, LOCK - 1/2 UNC - STOVER - PL BOLT, HEX 1/2 X 5 IN GR5 PL NUT, FLANGE - 1/2 UNC PL BOLT, WHEEL - HA6 HUB - WB PLATE, GREASE BLOCK - 3/4 IN - HEAVY CASTER ASSY, RAIL - HVY MAIN FRM - BLK BOLT, HEX 1 X 6 1/2 UNC GR5 PL BOLT, HEX 1 X 5 UNC GR5 PL WASHER, FLAT - 1 IN GR8 PL NUT, HEX 1 UNC GR5 PL BUSH, 2 OD X ID X 1 3/8 IN - FRONT CASTER - PL Parts Description: Heavy Dual Castor Bundle
19 ONLY USED ON THE 2 FRONT BOLTS ENSURE THAT THERE IS A CONNEX BUSHING INSTALLED IN MAIN RAIL ( SHOULD BE ALREADY BE THERE) LOOSE BEFORE BOLTS ARE IN INCLUDED WITH HUB AND SPINDLE OPTIONAL R16.5 TIRE PART # COMPATIBLE WITH TIRE
20 18 ITEM QTY. PART NO. DESCRIPTION ASSY, REAR AXLE - DUAL -.5L15 - BLK ASSY, TIRE -.5L15F1 - HWY SRV - PLY - 8 BOLT ASSY, HUB/SPINDLE - H8-2 1/8 IN STRAIGHT SPINDLE ASSY, SPINDLE HOLDER - WALKING AXLE - 15/ BLK ASSY, PIVOT PIN WALKING AXLE - SEEDMASTER BOLT, WHEEL - HA6 HUB - WB BOLT, U-SQ - 3/4 UNC X 4 ID X 10 IN - 2 IN THD - GR8 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL BOLT, HEX 1/2 X 5 IN GR5 PL BOLT, HEX 1/2 X 3 1/2 IN UNC GR5 PL NUT, FLANGE - 1/2 UNC PL NUT, LOCK - 1/2 UNC - STOVER - PL ASSY, RAIL - HVY MAIN FRM - BLK Parts Description: Rear Walking Axle Part No
21 " TUBE TO TUBE 7 REAR CROSS BEAM NOT SHOWN IN THIS VIEW FRONT OF MACHINE INCLUDED WITH HUB AND SPINDLE OPTIONAL R16.5 TIRE PART # COMPATIBLE WITH TIRE
22 20 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 1/2 X 5 IN GR5 PL BOLT, HEX 7/8 X 4 1/2 UNC GR5 PL NUT, FLANGE - 1/2 UNC PL NUT, HEX - 7/8 UNC PL WASHER, FLAT 7/8IN GR8 PL ASSY, HUB/SPINDLE - H6-2 IN STRAIGHT SPINDLE BOLT, WHEEL - HA6 HUB - WB ASSY, TIRE -.5L15-8 PLY - 6 BOLT - 1. POS. OFF CELLTITE SPONGE - 1/2 X 1 IN - A/B PAD, WEAR 1/4 IN - NYLON TOP PAD, WEAR 1/4 IN - NYLON - BOTTOM ASSY, SINGLE CASTOR - SEED MASTER - BLK PLATE, GREASE BLOCK - 3/4 IN - CASTOR ASSY, RAIL - HVY MAIN FRM - BLK Parts Description: Single Castor Assembly Part No
23 ENSURE THAT THE PRE-INSTALLED CONNEX BUSHING (PART # ) IS INSTALLED IN MAIN RAIL INCLUDED WITH HUB AND SPINDLE 8
24 22 ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 1/2 X 6 IN GR5 PL BOLT, HEX 7/8 X 4 1/2 UNC GR5 PL NUT, FLANGE - 1/2 UNC PL NUT, HEX - 7/8 UNC PL WASHER, FLAT 7/8IN GR8 PL ASSY, HUB/SPINDLE - H6-2 IN STRAIGHT SPINDLE BOLT, WHEEL - HA6 HUB - WB ASSY, TIRE -.5L15-8 PLY - 6 BOLT - 1. POS. OFF CELLTITE SPONGE - 1/2 X 1 IN - A/B PAD, WEAR 1/4 IN - NYLON TOP PAD, WEAR 1/4 IN - NYLON - BOTTOM PLATE, GREASE BLOCK - 3/4 IN - CASTOR ASSY, WING RAIL - OUTSIDE - BLK ASSY, DUAL WING CASTOR -.5L16 - BLK Parts Description: Dual Wing Castor Assembly Part No UPGRADE FROM SINGLE CASTOR:
25 ENSURE THAT THERE IS A CONNEX BUSHING INSTALLED IN MAIN RAIL (SHOULD ALREADY BE THERE) INCLUDED WITH HUB AND SPINDLE
26 24 ITEM QTY. PART NO. DESCRIPTION ASSY, WING RAIL - OUTSIDE - BLK ASSY, REAR AXLE - WING - BLK ASSY, TIRE -.5L15-8 PLY - 6 BOLT - 1. POS. OFF ASSY, HUB/SPINDLE - H6-2 IN STRAIGHT SPINDLE BOLT, U-SQ - 3/4 UNC X 4 ID X 8 IN -2 IN THD - GR8 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL BOLT, HEX 1/2 X 5 IN GR5 PL NUT, FLANGE - 1/2 UNC PL BOLT, WHEEL - HA6 HUB - WB17 Parts Description: Rear Wing Axle Part No
27 INCLUDED WITH HUB AND SPINDLE
28 26 ITEM QTY. PART NO. DESCRIPTION ASSY, CASTOR MOUNT - REAR WING - BLK PLATE, BOLT 5/8 IN - REAR WING CASTOR TOP PLATE ASSY, WING RAIL - OUTSIDE - BLK ASSY, REAR BEAM - WING - RH - WIDE 5 PLEX - BLK ASSY, SINGLE CASTOR - SEED MASTER - BLK PLATE, GREASE BLOCK - 3/4 IN - CASTOR PAD, WEAR 1/4 IN - NYLON - BOTTOM PAD, WEAR 1/4 IN - NYLON TOP ASSY, HUB/SPINDLE - H6-2 IN STRAIGHT SPINDLE ASSY, TIRE -.5L15-8 PLY - 6 BOLT - 1. POS. OFF NUT, HEX 3/4 UNC GR5 PL BOLT, HEX 3/4 X 2 UNC GR5 PL WASHER, FLAT 3/4IN GR8 PL BOLT, HEX 3/4 X 9 UNC GR5 PL BOLT, HEX 7/8 X 4 1/2 UNC GR5 PL WASHER, FLAT 7/8IN GR8 PL NUT, HEX - 7/8 UNC PL BOLT, HEX 7/8 X 4 UNC GR5 PL BOLT, WHEEL - HA6 HUB - WB BOLT, HEX 1/2 X 5 IN GR5 PL NUT, FLANGE - 1/2 UNC PL Parts Description: Rear Wing Castor Assembly Part No
29 ENSURE THAT THE PRE-INSTALLED CONNEX BUSHING (PART #250613) IS INSTALLED IN CASTOR MOUNT INCLUDED WITH HUB AND SPINDLE 10
30 PINTLE HITCH AXLE PART # Parts Description: Rear Hitch Packages HEAVY REAR CLEVIS AXLE PART # PINTLE HITCH AXLE PART # HEAVY REAR CLEVIS AXLE PART # ITEM QTY. PART NO. DESCRIPTION ASSY, PINTLE HITCH MNT - DRILL REAR AXLE - NOVA - BLK ASSY, HEAVY REAR CLEVIS AXLE - BLK ASSY, PINTLE HITCH MNT - DRILL REAR 750 AXLE - NOVA - BLK ASSY, HEAVY REAR CLEVIS AXLE - BLK PLATE, BOLT 5/8 IN - MAIN - DRILL HITCH - NOVA - BLK PLATE, BOLT 5/8 IN - CLAMP - PINTLE HITCH AXLE - NOV PINTLE HOOK - HOLLAND - PH-410-RN BOLT, HEX 3/4 X 10 UNC GR5 PL WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL BOLT, HEX 3/4 X 2 1/2 UNC GR5 PL 9 4 8
31 MORRIS/JOHN DEERE/FLEXICOIL REAR HITCH - PART # (2 REQ'D) BOURGAULT REAR HITCH PART # Parts Description: Rear Hitch Packages STANDARD REAR HITCH PART # ITEM QTY. PART NO. DESCRIPTION BOLT, HEX 7/8 X 5 UNC GR5 PL BOLT, U-SQ - 3/4 UNC X 8 ID X 8 IN - 2 IN THD - GR8 PL NUT, HEX 3/4 UNC GR5 PL NUT, HEX - 7/8 UNC PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT 7/8IN GR8 PL PLATE, BOLT 3/4 IN - 8 X 6 REAR HITCH PLATE, SPACER 3/4 IN - REAR HITCH PLATE, TOP 3/4 IN - REAR HITCH ASSY, BOURGAULT REAR HITCH - SEEDMASTER - BLK ASSY, REAR HITCH - MORRIS - BLK
32 30 ITEM QTY. PART NO. DESCRIPTION ASSY, PACKING SENSOR ARM - BLK PLATE, MOUNT - 3/4 IN - PACKING SENSOR MNT PLATE BUSH, PIVOT SPACER 1 1/4OD X.77ID X 1 IN BUSH, SPACER 1 1/4OD X.77ID X 1 1/2 IN SPACER, BOTTOM LOAD CELL - PACKING SENSOR SPACER, TOP LOAD CELL - PACKING SENSOR LOAD CELL, 2500 LB - ML K BOLT, HEX 3/4 X 5 1/2 UNC GR5 PL BOLT, HEX 3/4 X 4 UNC GR5 PL WASHER, FLAT 3/4 IN PL BOLT, HEX 1/2 X 2 1/4 IN GR5 PL NUT, FLANGE - 1/2 UNC PL BUSH, 1 1/2OD X 1 1/4ID X 7/8 IN - CONNEX WASHER, FLAT 3/4IN GR8 PL NUT, HEX 3/4 UNC GR5 PL NUT, LOCK - 3/4 UNC - STOVER - PL BUSH, CYL SPACER 1.4 OD X.77ID X.9 IN AMPLIFIER, PFS LOAD CELL EXTENSION CABLE - 40 FT LOAD CELL EXTENSION CABLE - 40 FT Parts Description: Opener Force Sensor Bundle Part No
33 A * * * * * * * DETAIL A 3 * TO PFS, DRILL NODE CABLE * 1 RAVEN *18 *20 * THESE ITEMS ARE INCLUDED WITH THE OPENER
34 32 ITEM QTY. PART NO. DESCRIPTION BUSH, PIVOT SPACER 1 1/4OD X.77ID X 1.25 IN BUSH, SPACER 1 1/4OD X.240W X 3.925IN - PACKER BUSH, CYL SPACER 1.4 OD X.77ID X.9 IN ASSY, HANGING BRKT - SH SENSOR - BLK PLATE, CLAMP 3/8 IN - MAIN PIVOT - BLK PAD, WEAR 1/4 IN - UHMW - SH PIVOT ASSY, SMART HITCH SENSOR - YLW SHEET, DISK - 10 GA - SMART HITCH CHAIN, LIFT - 5/16 GR70-13 LINKS PLATE, MAIN ARM 1/2 IN - SMART HITCH ASSY, HOLDER - HALL EFFECT SENSOR - BLK ANGLE, STOP - SMART HITCH - HALL EFFECT - BLK PLATE, FRMD 10GA - SMART HITCH SENSOR SHEILD - BLK PLATE, KEY - 3/16 IN - SMART HITCH - HALL EFFECT - BLK BOLT, HEX 1/2 X 1 1/2 IN GR5 PL BOLT, HEX 3/4 X 2 3/4 UNC GR5 PL BOLT, HEX 3/4 X 5 1/2 UNC GR5 PL BOLT, HEX 3/8 X 1 1/4 IN GR5 PL BOLT, HEX 3/8 X 1 IN GR5 PL BOLT, HEX 3/8 X 2 IN GR5 PL BOLT, HEX 3/8 X 4 IN GR5 PL BOLT, U-SQ - 3/4 UNC X 4 ID X 6 IN - 2 IN THD - GR5 PL NUT, FLANGE - 3/8 UNC PL NUT, HEX 3/4 UNC GR5 PL NUT, HEX - 3/8 UNC PL NUT, LOCK - 3/4 UNC - STOVER - PL NUT, LOCK - 1/2 UNC - STOVER - PL WASHER, FLAT 3/4 IN PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT - 1/2 IN - GR8 - PL WASHER, FLAT - 3/8 IN GR8 PL BUSH, 1 1/2OD X 3/4ID X.134IN - PL BUSH, 1 1/2OD X 1 1/4ID X 1 1/8 IN - CONNEX BEARING, BALL - BEI RS SENSOR, HALL EFFECT - SMART HITCH CYL, HYD 1 3/4 X 4 IN - SMART HITCH BOLT, HEX 3/4 X 3 1/4 UNC GR5 PL Parts Description: Smart Hitch Sensor Bundle - Hall Effect Sensor Style Part No
35 INSERT STOP BOLT HERE FOR TOW-BETWEEN CONGIFGURATION INSERT STOP BOLT HERE FOR ALL OTHER CONGIFGURATIONS HANGING BRACKET SIDE VIEW A HALL EFFECTS SENSOR ASSEMBLY SOME PARTS NOT SHOWN FOR CLARITY
36 34 ITEM QTY. PART NO. DESCRIPTION PLATE, SPACER 3/4 IN - REAR HITCH ASSY, LIFT KIT - REAR BEAM MNT RAILS/SXX305 - NOVA ASSY, LIFT KIT - REAR LINK ASSY, LIFTKIT - MIDDLE POST ASSY, LIFTKIT - MIDDLE POST MOUNT PLATE, LINK 3/4 IN - CABLE LINK CABLE, 92 IN PLATE, LINK 3/4 IN - LIFT KIT REAR LINK ACTIVE WING BRACE SHACKLE CYL, HYD 3 X 8 IN - ACTIVE WING BOLT, HEX 7/8 X 4 UNC GR5 PL BOLT, HEX 3/4 X 5 1/2 UNC GR5 PL BOLT, HEX 1 X 4 IN UNC GR5 PL BOLT, U-SQ - 3/4 UNC X 8 ID X 8 IN - 2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 4 ID X 8 IN -2 IN THD - GR8 PL BOLT, U-SQ - 3/4 UNC X 8 ID X 10 IN -2 IN THD - GR8 PL NUT, HEX 3/4 UNC GR5 PL NUT, HEX - 7/8 UNC PL NUT, HEX 1 UNC GR5 PL NUT, LOCK - 3/4 UNC - STOVER - PL WASHER, FLAT 3/4IN GR8 PL WASHER, FLAT 7/8IN GR8 PL WASHER, FLAT - 1 IN GR8 PL Parts Description: Lift Kit Bundles Part No Standard Frame M-Fold Frame Standard with Heavy Axle M-Fold with Heavy Axle
37 FOR HEAVY AXLE USE DETAIL B A B 16 FOR STD FRAME USE DETAIL A 23 9 DETAIL C 7 FOR M-FOLD USE (136 1/8") C
38 3 5 4 For 8 x 8 Beam Use Parts Description: Clearance Light Mount Part No x 6 Beam x 8 Beam ITEM QTY. PART NO. DESCRIPTION ASSY, CLEARANCE LIGHT MOUNT ASSY, CLEARANCE LIGHT ADJUSTABLE ARM BOLT, HEX 1/2 X 8 IN GR5 PL PLATE, BOLT 5/8 IN - CLEARANCE LIGHT MOUNT WASHER, FLAT - 1/2 IN - GR8 - PL NUT, HEX 1/2 UNC GR5 PL BOLT, HEX 1/2 X 1 1/4 IN GR5 PL ZIP TIE LIGHT CABLES HERE
39 Parts Description: Wheel & Hubs and Cylinders Wheel and Hubs 37 Wheel Hub/Spindle Location Description Part# Description Part # Bearing Kit Wings.5L H Main Frame.5L H Main Frame 15/55-17 OR R H Rear 18.4L HA Rear 28L H Rear DUAL 28L26 - INNER H Rear DUAL 28L26 - OUTER Rear 750/65R H Rear DUAL 750/65R26 - INNER H Rear DUAL 750/65R26 - OUTER Rear 30.5L H Rear 800/65R H Cylinders and Seal Kits Cylinder Seal Kit Location Description Part# Part# Opener 1-3/4 x STD Wing 3 x STD Wing 4 x M- Fold Wing 3 x M- Fold Wing 4-1/2 x Smart Hitch Sensor 1-3/4 x Waggle Plate 2-1/2 x Fill Auger 2 x Fill Auger 2 x Lift Kit 3 x Active Wing Brace* 3 x Active Wing Brace* 2-1/2 x *See Active Wing Cylinder (Pg.) for correct cylinder size
40 Parts Description: Main Hydraulic Block Part No PART NO. QTY DESCRIPTION MANIFOLD, HYD - MAIN - EATON GAUGE, PRESSURE - SPG SU-7/16 - GLYCERINE FILLED GAUGE, PRESSURE - SPG S-U - GLYCERINE FILLED GAUGE, PRESSURE - SPG S-U - GLYCERINE FILLED VALVE, PILOT TO SHIFT - EATON PTS VALVE, PRES-RED EATON PRV2-10-S-0-35/ VALVE, SOLENOID 4W2P - EATON SV SOLENOID - WING LOCK - EATON SBV VALVE, SOLENOID - OUTER WING - EATON SV VALVE, SOLENOID - FAST WING - EATON SV VALVE, RELIEF - THERMAL - EATON 1DR30P20S- SP VALVE, CHECK - WING - EATON CV310P COIL, V EATON MCSCH0DG COIL, V - EATON MCSCJ0DG VALVE, RELIEF TANK LINE EATON 1DR30P10S VALVE, PRES-RED EATON PRV2-10-S-0-25/ VALVE, MAIN STAGE RELIEF - SUN RPEC-8WN - SHANK PRESSURE VALVE, PWM PILOT STAGE - SUN RBAP-LBN PSI W/MANUAL OVERRIDE - SHANK PRESSURE COIL, SOLENOID - VOLT SUN
41 / / / / / / /
42 Parts Description: Smart Openers Hydraulic Manifold Part No PART NO. QTY DESCRIPTION MANIFOLD, HYD - SMART OPENERS - EATON VALVE, PILOT TO SHIFT - EATON PTS VALVE, SOLENOID - EATON SV VALVE, PILOT TO SHIFT - EATON PTS VALVE, CHECK EATON CV--P VALVE, COIL, V - EATON MCSCS0DG VALVE, REDUCING/RELIEVING - SUN PPFB-8WN - SMARTOPENERS VALVE, PWM PILOT STAGE - SUN RBAP-LBN PSI W/MANUAL OVERRIDE - SHANK PRESSURE COIL, SOLENOID - VOLT SUN
43 Parts Description: Hydraulic Schematic Opener Part No
44 Parts Description: Hydraulic Schematic M-Fold Opener Part No
45 Parts Description: Hydraulic Schematic Opener Lock Up Part No
46 Parts Description: Hydraulic Schematic STD 3-Plex Wing Fold Part No
47 Parts Description: Hydraulic Schematic Wide 3-Plex Wing Fold Part No
48 Parts Description: Hydraulic Schematic STD 5-Plex Wing Fold Part No
49 Parts Description: Hydraulic Schematic M Wing Fold 47
50 Parts Description: Hydraulic Schematic Smart Hitch Part No
51 Parts Description: Hydraulic Schematic Lift Kit Part No
52 Parts Description: Cruizer II In-Cab Kit Wiring Diagram / Part No
53 Parts Description: Viper Control In-Cab Kit Wiring Diagram / Part No
54 Parts Description: Toolbar Functions with SmartOpeners Wiring Diagram 52
55 Parts Description: Toolbar Functions with Auto Lift Wiring Diagram 53
56 Parts Description: Smart Hitch Node & Cabling Electrical Schematic 54
57 Parts Description: Clearance Light Wiring Schematic 55
HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A.
GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. FORM NO. 79023737A JULY, 2005 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the
YARD CRUISER HYDRO DRIVE SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE SERIES 1 & MODELS YZ11BE YZ181BE YZ15BVE YZ158BVE TM CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR... CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
SECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
MDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
Mini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA
Mini-ZT Parts Manual Models 0-0 0-00 - 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an
REEL LAWN MOWERS MASPORT 400-500-660
Issue A June 2009 REF # 719046 REEL LAWN MOWERS MASPORT 400-500-660 Part number Model Engine MASPORT 019036 400 RRR B & S Series 475 MASPORT 019044 400 RRR Honda GX160 MASPORT 019046 500 RRR B & S Series
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661
PARTS MANUAL FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661 FOR YOUR CONVENIENCE YOU MAY ALSO PLACE ORDERS
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
4,000 6,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad
7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
ESTATE WAGON MODEL 300 OWNER MANUAL
ESTATE WAGON MODEL 300 OWNER MANUAL Country Manufacturing, Inc. P.O. Box 104 Fredericktown, OH 43019 PH: 740-694-9926 FAX: 740-694-5088 I. INTRODUCTION The Model 300 Four Wheeled Wagon (ESTATE VERSATILITY
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
ENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
2510/2550 Dust Control Burnisher
250/2550 Dust Control Burnisher Operator and Parts Manual TENNANT COMPANY Commercial Products 2875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 800 678 4240 CUSTOMER SERVICE: 800-982 7658 607597 Rev. 0 (2-00)
SET-UP & PARTS MANUAL
FERTILIZER COULTER MODEL 2995/2996 SET-UP & PARTS MANUAL YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com
SELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
Rating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
MUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
ILLUSTRATED PARTS LIST XTREME ICE MAKER (1230 SERIES) MODEL NO.
XTREME ICE MAKER (0 SERIES) MODEL NO. 00 00 00 00 00 00 0 XTREME ICE MAKER (0 SERIES) FIGURE. GENERAL ASSEMBLY (AIR CONDENSER SHOWN) 00 Screw TC - HXWS 00000 Screw TC - HXWS 0 (Marine) 0000 Grommet Nut
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
Elevating Work Platform Repair Parts Manual. For PUSH 6 PRO, PUSH 8 PRO and PUSH 10 PRO
Elevating Work Platform Repair Parts Manual For PUSH 6 PRO, PUSH 8 PRO and PUSH 10 PRO PUSH 6 PRO PUSH 8 PRO PUSH 10 PRO sn: 01-000025+ sn: 01-00068+ sn: 01-000050+ PN 0120877 September 2012 The aerial
OPERATION AND MAINTENANCE MANUAL WASP, Inc. Bag Cart Model No. A01154D Drawing No. A02022D
OPERATION AND MAINTENANCE MANUAL WASP, Inc. Bag Cart Model No. A01154D Drawing No. A02022D WASP RECORD OF REVISIONS REV. ISSUE DATE BY REV. ISSUE DATE BY NO. DATE INSERTED NO. DATE INSERTED Original 001
DR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product
Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
PARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
SPARE-PARTS BOOK Z 150-195. Model: TABLE OF CONTENTS. Chapter 4.3: Alu.platform, flat 30mm laser L. Chapter 5: Cylinders
SPARE-PARTS BOOK TABLE OF CONTENTS Model: Z 50-95 Chapter 4.: Alu.platform, flat 0mm laser L PLZ044 Alu. platform Z, flat 0mm laser L Page 4 Chapter 5: Cylinders 5985 Lift cylinder Page 6 5986 Tilt cylinder
400 x 8 HUBS 4 HOLE HUBS
400 x 8 HUBS HUB - 4001 400 x 8 Tire, Hub and Bearing HUB - S402 Spindle HUB - B403 Bearing - LM44643 HUB - R404 Race - BM44610 HUB - S405 Seal HUB - S406 Seal - HD203025 HUB - S407 Seal - CR HD12428 HUB
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR
CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR Sterling Midi Junior is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, upolstered seat
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
INTRODUCTION KINGPIN REPLACEMENT
KINGPIN REPLACEMENT Author: Randy Baumann All information, illustrations and specifications are based on the best information available at the time of publication. The author cannot guarantee the accuracy
Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
LIFT-505. BMF Lift Kit. Yamaha Drive Gas or Electric. Installation Instructions
LIFT-505 BMF Lift Kit Yamaha Drive Gas or Electric Installation Instructions Contents of LIFT-505 Yamaha Drive BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger
CLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
ALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
ILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
Replacement Parts Catalog
Replacement Parts Catalog Replacement Parts Contents A-Class Right Hand 4 Model Printer Assemblies... 1 Cover Assembly (15-3021-01)... 2 Display Assembly (24-2605-01)... 3 Direct Thermal (78-2474-01)...
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE R001561 Lockwasher 12402, 42203, 5402, 65463, E1561, L1893, L893, M1051 PIN SIZE THICK O.D. I.D. DIA. LGTH 7/32" 5-1/16"
USED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
DOOR PARTS SECTION D-1
DOOR PARTS SECTION D-1 1 11 10 11 9 8 1 1 7 6 10 5 4 D- DOOR ASSEMBLY ITEM NO DESCRIPTION QTY. PART NO 1 SERVICE DOOR ASSEMBLY ~ * CONTROL PANEL 1 * DOOR GUARD 1 * 4 DOOR ROLLER ASSEMBLY 1 1148-7 5 T-HANDLE
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height...............................7 Cover Disk...............................9
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
88-98 Chevy / GMC Fullsize 4WD 6-Lug 2"- 2 1/2" Suspension Lift Installation Instructions
88-98 Chevy / GMC Fullsize 4WD 6-Lug 2"- 2 1/2" Suspension Lift Installation Instructions Safety Glasses Metric / Standard Wrenches & Sockets Floor Jack Jack Stands Hack Saw Ball Joint Seperator Measuring
Installation manual. 3 suspension system. 2009-2013 Ford F150. Part # 23000. Part # 23000. Important customer information: 2009-2013 Ford F150
Installation manual 3 suspension system 2009-2013 Ford F150 Part # 23000 sj12112012rev.03 Part # 23000 2009-2013 Ford F150 3 suspension system Part # Description Qty. 23000-01 Driver side upper control
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 2 of 15 Carburetor 1 93205A 1 Repair Kit 2 93205A 1 Repair Kit 3 93205A 1 Repair Kit 4 93205A 1 Repair Kit
RT3 POWER-V BLADE SNOWPLOW ASSEMBLY INSTALLATION PROCEDURE
M.J.Electric, Inc. P.O. BOX 788, IRON MOUNTAIN, MICHIGAN 49801-0788 RT3 POWER-V BLADE WITH SMARTHITCH SNOWPLOW ASSEMBLY INSTALLATION PROCEDURE TABLE OF CONTENTS Snowplow Assembly Installation Procedure...
VW Caddy W21-760-3503 INSTALLATION INSTRUCTIONS
Unit 626 Kilshane Avenue, North West Business Park, Ballycoolin, Dublin 15, Ireland Telephone: +353 1 8612 632, Fax: +353 1 8612 647, email: sales@driveriteltd.com www.driveriteltd.com VW Caddy W21-760-3503
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
VE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
WARNING TO END USER, INSTALLER AND SELLER OF THIS PART!
WARNING TO END USER, INSTALLER AND SELLER OF THIS PART! By installing this part you are accepting full responsibility and liability for proper wheel and tire fitment after installation. It is the installer
FRAME ASSEMBLY Item Description Part No Item Descriptiom Part No
FRAME ASSEMBLY Item Description Part No Item Descriptiom Part No 1 BOLT HT ZP M8X20 SET SCREW FBOPL02 26 FRAME M500 PTD RED L1505-710R 2 WASHER SPRING ZP M8 FWAPL58 26 FRAME M500 W/A PTD MASPORT L1505-710M
Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
R O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. 11 10 20 12 4 18 19 1 2 13 16 ITEM QTY NAME MATERIAL 1...2... 1/2" x 3 1/2" BOLT... 350103-00 2...2... 1/2" x 2" BOLT... 350097-00 3...6... 1/2" x 1 1/2" BOLT... 350095-00 4...2...
Rear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
2700 DUST CONTROL MACHINE:
700 DUST CONTROL MACHINE: 30016 PAGE 1 700 DUST CONTROL MACHINE: 30016 11 17 9 15 8 16 10 1 13 7 6 1 1 30 OLD STYLE BATERY BOX 8 3 5 3 7 0 18 19 31 3 9 5 1 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
LEWIS WINDROWER OWNER / OPERATOR MANUAL
LEWIS WINDROWER OWNER / OPERATOR MANUAL MODEL # WR-1 WINDROWER Manufactured by: LEWIS BROTHERS MANUFACTURING, INC. Post Office Box 146 Baxley, GA 31513 Tel: (912) 367-4651 Fax: (912) 367-3958 2-21-14 1
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
To The Owner Carton Contents Assembly Parts Lists Warranty. Models OEM-190-182 IMPORTANT
To The Owner Carton Contents Assembly Parts Lists Warranty Form No. 3357-363 Rev. A OPERATOR S MANUAL Twin Rear Bagger Kit For FastAttach Garden Tractors with 46 Deck Models OEM-190-182 IMPORTANT READ
830-II *330492* Cummins 4 Cylinder Engine Breakdown. 330492 Rev. 00
830-II Cummins 4 Cylinder Engine Breakdown 330492 Rev. 00 *330492* This manual is furnished with each new TENNANT Model 830. This manual consists of the 4 Cylinder Cummins Engine Breakdown. MACHINE DATA
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Replacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710