Safe Principles of Working at Height- International prospective
|
|
- Lorraine Bond
- 7 years ago
- Views:
Transcription
1 Safe Principles of Working at Height- International prospective Eur Ing Namir George MSc. MIChemE, FIOSH, RSP Manager International Consulting Services National Safety Council 1
2 Namir George Chemical Engineer, MIChemE - UK MSc. Occupational Safety & Health, UK FIOSH, RSP 34 years experience in EHS in various industry sectors Joined National Safety Council in 2015 based in UK international consulting 2
3 NATIONAL SAFETY COUNCIL Our Mission: The National Safety Council saves lives by preventing injuries and deaths at work, in homes and communities, and on the roads, through leadership, research, education and advocacy. Our Vision: Making Our World Safer 3
4 Established 1913 NATIONAL SAFETY COUNCIL Head office in Chicago - USA Chartered 1954 Not for profit Funded Membership, Training, Catalog, Congress Departments Workplace Safety, Defensive Driving, Emergency Care 4
5 NATIONAL SAFETY COUNCIL Partners internationally in Turkey Kaya Consulting 5
6 Objectives What is working at height What are the risks International Standards International Requirements 6
7 What is Working at Heights Work at height is work in any place, including a place at, above or below ground level, where a person could be injured if they fell from that place. Includes Access and Egress work at or below ground level Does not include Stairways or slips or trips on the level 7 7
8 What are the hazards of working at height Employees put in dangerous positions Employees handling very heavy or awkward loads causing falls or injury Falls due to collapses of partly built permanent works Workers crushed by falling or otherwise moving elements or equipment 8
9 What are the hazards of working at height (Cont d) Falling machinery or parts of machinery Falling loads Crushing due to impact of moving or toppling plant and equipment Impact from release of pressure Falling from plant and equipment Falls caused by swinging loads, plant and equipment 9
10 What are the hazards of working at height (Cont d) Limbs or bodies caught in parts of the permanent works or machinery Physiological damage through exposure to weather Poor ergonomics Physiological and psychological damage through stress of dangerous work Stress caused by poor environment Others?? 10
11 International Standards UK Working at Height Regulations (WAHR) 2005 USA OSHA Sub part M Fall Protection ILO Construction OS&H ANSI/ASSE Z359.0 Z Others 11
12 Requirements UK Work at height means work in any place where, if there were no precautions in place, a person could fall a distance liable to cause personal injury. For example you are working at height if you: are working on a ladder or a flat roof; could fall through a fragile surface; could fall into an opening in a floor or a hole in the ground
13 Requirements UK (cont d) Falls from height are one of the biggest causes of workplace fatalities and major injuries. Common causes are falls from ladders and through fragile roofs. The purpose of WAHR is to prevent death and injury from a fall from height
14 Requirements UK (cont d) Work is properly planned, supervised and carried out by competent people. Employers and those in control must first assess the risks. Take a sensible, pragmatic approach when considering precautions for work at height. Factors to consider: the duration and frequency; and the condition of the surface being worked on
15 Requirements under OSHA The Subpart M was revised and its designed to prevent employees from falling off, onto, or through working levels and to protect employees from being struck by falling objects. Why? Falls are the leading cause of fatalities in the construction industry
16 Requirements under OSHA.. Cont d Where protection is required, select fall protection systems appropriate for given situations. Use proper construction and installation of safety systems. Supervise employees properly. Use safe work procedures. Train workers in the proper selection, use, and maintenance of all protection systems
17 Requirements under OSHA.. Cont d Each employee less than 6 feet (1.8 m) above dangerous equipment shall be protected from falling into or onto the dangerous equipment by guardrail systems or by equipment guards. Each employee 6 feet (1.8 m) or more above dangerous equipment shall be protected from fall hazards by guardrail systems, personal fall arrest systems, or safety net systems
18 Requirements under ILO Fall of materials Preventive measures should be taken against the fall of workers and tools or other objects or materials. Openings All openings through which workers are liable to fall should be kept effectively covered or fenced and indicated in the most appropriate manner. Train workers in the proper selection, use, and maintenance of all protection systems
19 Requirements ANSI/ASSE Z359 Scope Guidelines and requirements for an employer s managed fall protection program covering: Policies Duties and training Fall protection Hazard elimination and control Rescue procedure Incident investigation Program evaluation 19 19
20 Requirements ANSI/ASSE Z359 Fall of materials Preventive measures should be taken against the fall of workers and tools or other objects or materials. Openings All openings through which workers are liable to fall should be kept effectively covered or fenced and indicated in the most appropriate manner. Train workers in the proper selection, use, and maintenance of all protection systems
21 Work At Height Standard Look for all work-at-grade alternatives before beginning work at height. Fall hazards associated with working at height shall be identified and mitigated prior to beginning work, and personnel must be protected by fall prevention or fall protection systems. Personnel performing work-at-height shall be competent in the roles for which they are responsible, and must be trained in the proper use, maintenance and inspection of the equipment they will be required to use
22 Summary Awareness of the risks associated with working at height Knowledge of Work at Height safe requirements and practices Understanding of the control measures required for Work at Height 22
23 Conclusion Lets all double our efforts and work together on our journey to achieve Safety Excellence with working at height. 23
24 Thank You 24
25 25
THE UNIVERSITY OF SHEFFIELD WORK AT HEIGHT POLICY
THE UNIVERSITY OF SHEFFIELD WORK AT HEIGHT POLICY CONTENTS Page No 1 INTRODUCTION 2 2 LEGISLATION 2 3 HIERARCHY OF CONTROL 2 4 WORK AT HEIGHT POLICY 3 5 ROLES AND RESPONSIBILITIES 3 6 RISK ASSESSMENTS
More informationWork at Height / Falling Objects
Introduction This information sheet gives employers and employees practical advice on work at height and falling objects and how to eliminate or reduce the risk of harm or damage occurring. It will assist
More informationConstruction OS&H Working at height
Construction OS&H Working at height Summary Common hazards with working at height General OS&H requirements when working at height Scaffolding Structural frames Demolition of above ground structures Roof-work
More informationAugust 2009 WORKING AT HEIGHT HSEW. Safety H S E W A WAY OF LIVING. Standards for professionals, be aware!
WORKING AT H S E W August 2009 HEIGHT A WAY OF LIVING Safety He alth Well-being Environment HSEW Standards for professionals, be aware! Work safely or don t work at all Familiarise yourself as quickly
More informationWorking at height A brief guide
Working at height A brief guide Introduction This brief guide describes what you, as an employer, need to do to protect your employees from falls from height. It will also be useful to employees and their
More informationworking surface can be a potential fall hazard.
OSHA s Focus Four Mitigating Jobsite Hazards By Pete Rice, CSP, CIH, REHS Construction is among the most dangerous industries in the country. In 2010, data from the Bureau of Labor Statistics (BLS) indicate
More informationFall Protection Safe Work Plan Fall Distance of 7.5M or More
Department of Facilities Management Occupational Health and Safety Fall Protection Safe Work Plan Fall Distance of 7.5M or More When employees are involved in jobs with a risk of falling they must: Shop:
More informationLevel 1 Award in Health and Safety in a Construction Environment
Level 1 Award in Health and Safety in a Construction Environment Student notes (sample) www.britsafe.org Membership Training Qualifications Audit and Consultancy Audit and Policy Consultancy and Opinion
More informationWORKING AT HEIGHT GUIDELINES. Version II
WORKING AT HEIGHT GUIDELINES Version II 21 st September 2011 WORKING AT HEIGHT GUIDELINES EXECUTIVE SUMMARY Working at height is where an individual is carrying out work in any place in the course of obtaining
More informationWORKPLACE SAFETY. Table 1: Industries with highest fatalities rates and types of highest fatal* / non fatal^ injuries
INTERISK ASIA PTE LTD. July 2011 WORKPLACE SAFETY Do you know that the workplace safety is part of everyone s responsibility? And so how many of us are assessing workplace safety naturally like it is part
More informationWORK AT HEIGHT. STFC Safety Code No 9. Rev. 1.4, Issued April, 2015
WORK AT HEIGHT STFC Safety Code No 9 Rev. 1.4, Issued April, 2015 Note - This document may have been superseded by a more recent version. Revisions 1 Initial Launch November 2007 1.1 Amendments to training
More informationHealth & Safety Course Descriptions. Health & Safety
Course Descriptions A range of high quality intranet and web deliverable Health and Safety courses, concentrates on making the workplace safer more healthy. The courseware is aimed at all levels of staff
More informationBurton Hospitals NHS Foundation Trust. Committee On: 20 January 2015. Review Date: December 2017. Corporate / Directorate
POLICY DOCUMENT Burton Hospitals NHS Foundation Trust WORK AT HEIGHT POLICY Approved by: Executive Management Committee On: 20 January 2015 Review Date: December 2017 Corporate / Directorate Clinical /
More informationTemporary Worker Safety Checklist
Temporary Worker Safety Checklist The following checklists provide guidance for staffing agencies and employers that hire temporary workers regarding the steps each party should take to ensure it is meeting
More informationFall Protection Susan Harwood Grant Training Program 2013 Wood Frame Construction
WRONG BETTER Fall Protection Susan Harwood Grant Training Program 2013 Wood Frame Construction Learning Objectives Understand how OSHA defines residential construction Understand the proper use of guardrails
More informationCOURSE INFORMATION SHEET
Course ID: HGT - WRKHT COURSE OVERVIEW WORKING AT HEIGHTS Working at Heights is an approved Ontario Ministry of Labour (MOL) program (Approved Training Program ID # WAH56789). This program was designed
More informationWorking at Height. Procedure
Procedure *All Forth Valley College Health, Safety and Welfare Procedures are covered under the overarching Health, Safety and Welfare Policy. Status: Date of version: Reviewed by: Author/Contact Person;
More informationRZ Guardrail System Installation Manual
TM RZ Guardrail System Installation Manual RZ Guardrail System Compliance is based on OSHA standards: (Standards - 29 CFR) 1910.23 (e) and (Standards - 29 CFR) 1926.502 (b) Failure to read, understand
More informationQuestion and answer brief for the construction industry on the Work at Height Regulations 2005
Question and answer brief for the construction industry on the Work at Height Regulations 2005 Introduction This question and answer brief includes some of the key issues about the new Work at Height Regulations
More informationHEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS
HEALTH AND SAFETY REDUCING ACCIDENTS IN KITCHENS HEALTH & SAFETY UNIT SPRING 2006 CONTENTS 1. WHAT CAUSES ACCIDENTS?...2 2. WHO GETS INJURED?...2 3. SLIPS...2 4. TRIPS...3 5. SCALDS AND BURNS...3 6. MACHINERY
More informationThe Work at Height Regulations 2005 (as amended) A brief guide
The Work at Height Regulations 2005 (as amended) A brief guide Off work sick and worried about your job? Steps you can take to help your return to work Health and Safety The Work at Height Regulations
More informationHow to Manage Hazards
How to Manage Hazards FOR ROAD TRANSPORT If you are thinking about improving the health and safety of your workplace, hazard management is a good place to start. Why should you do this thing called hazard
More informationCHAPTER 10. FALL PROTECTION PROGRAM
CHAPTER 10. FALL PROTECTION PROGRAM 1000 GENERAL. This chapter establishes policy for developing fall protection programs to protect all Federal Aviation Administration (FAA) personnel working at elevated
More informationHazard Identification, Risk Assessment And Control Procedure
Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards
More informationSAFE WORK PROCEDURE SWP 015 WORKING AT HEIGHT SEPTEMBER 2013 DOC. NO. D13/248399
Operation Brief Description of Activity Limitations MORELAND CITY COUNCIL Operations Centre 7-9 Walter Street Hadfield Vic 3046 Tel: 8311 4300 Working at height Approved by the Walter Street OHS committee
More informationWorking at Heights. Understanding the Requirements of Fall Protection. 29 CFR 1926 Subpart M Fall Protection
Working at Heights Understanding the Requirements of Fall Protection 29 CFR 1926 Subpart M Fall Protection When is Fall Protection Required? Fall Protection is required for employees who are working: 1.
More informationWork at Height. John Frontczak Construction Manager Facilities Engineering. 2011 Chevron Corporation. All rights reserved.
Today Work at Height John Frontczak Construction Manager Facilities Engineering Agenda Definition and Requirements Fall Prevention Scaffolding Safety Fall Protection Fall-Arrest System Rescue Plan Training
More informationMACHINERY GUARDING. Your Practical Guide
MACHINERY GUARDING Your Practical Guide WELCOME TO AXA Introducing AXA One of the world s largest insurers With more than 50 million customers across the globe, AXA is one of the world s largest financial
More informationDirector, National Institute for Occupational Safety and Health. California Fatality Assessment and Control Evaluation (CA/FACE) Program
TO: FROM: SUBJECT: Director, National Institute for Occupational Safety and Health California Fatality Assessment and Control Evaluation (CA/FACE) Program Warehouse Worker Dies When He Falls Through a
More informationEMPLOYEE FALL PROTECTION
EMPLOYEE FALL PROTECTION You can fall from any height and be seriously injured or killed. In the construction industry, as well as any other industry, when falls from heights happen, they are usually very
More informationFall Hazards 1/3/2014. Introduction
Fall Hazards Introduction Fall hazards exist at most construction worksites exposing workers to dangerous work environments on a daily basis. A fall hazard is anything that may cause a person to lose his
More informationOSHA Update.. Darwin D. Craig, AAD 444 Regency Parkway Drive, Suite 303 Omaha, NE 68114 402.553.0171 800.642.8963 craig.darwin@dol.
OSHA Update.. Darwin D. Craig, AAD 444 Regency Parkway Drive, Suite 303 Omaha, NE 68114 402.553.0171 800.642.8963 craig.darwin@dol.gov OSHA s Emphasis Programs (Types) Enforcement Programs (NEP or LEP)
More informationWorking on back of vehicles
Working on back of vehicles Steel Transport Safety Network 2013 Conference Aug 15/16 Jennifer Chellew Working on back of vehicles Falls > Falling risks are big (data and examples) > Legal requirements
More informationOPTIONAL INFORMATION GUARDING FLOORS, STAIRS, AND OTHER OPENINGS SELF INSPECTION CHECKLIST
OPTIONAL INFORMATION Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: GUARDING FLOORS, STAIRS, AND OTHER OPENINGS Guidelines: This checklist covers some of the
More informationFall Protection Plan for Residential Roofing Construction. Tim Graboski Roofing, Inc.
Fall Protection Plan for Residential Roofing Construction Tim Graboski Roofing, Inc. This Fall Protection Plan Is Specific For the Following Project: Location of Job: Date Plan Prepared or Modified: Plan
More informationWalking and Working Surface Checklist:
Walking and Working Surfaces Purpose: This information is presented to improve the level of safety in our operations, and to inform you that we will comply with the OSHA Standard 29 CFR 1910.23. Responsibility:
More informationOccupational health and safety specification for construction works contracts
Occupational health and safety specification for construction works contracts 30 th November 2012 (Draft) Comment on this standard may be submitted by 08 February 2013 to: The Director-General National
More informationHealth and Safety Management in Healthcare
Health and Safety Management in Healthcare Information Sheet Nov 2010 This information sheet gives guidance on the key elements of health and safety management in healthcare. It is intended for small employers
More informationInjury Prevention for the Transportation and Warehouse Industry
Injury Prevention for the Workers in the transportation and warehousing industry encounter a variety of hazards, some of which are potentially fatal. This fact sheet: Increases awareness of the primary
More informationProcedural Guidance for Roof Access/Roof Work
University of Central Lancashire Safety, Health & Environment Section Procedural Guidance for Roof Access/Roof Work Document Number: FM/HSE 001 Revision Number: 2 Review Date: August 2005 Reviewed by:
More informationA Casebook of Fatal Accidents Related to Work-at-Height
A Casebook of Fatal Accidents Related to Work-at-Height Occupational Safety and Health Branch Labour Department Occupational Safety and Health Council This casebook is prepared by the Occupational Safety
More informationManaging the risk of falls while working on roofs in housing construction
Workplace Health and Safety Queensland Managing the risk of falls while working on roofs in housing construction Where the risk of falling is 3 metres or more (or roof slope over 26 ) Before you start
More informationwww.dol.govt.nz/prevent-falls/ PreventING falls from height Introduction How will worksites be targeted? Approach Who will be targeted?
PROACTIVE ENFORCEMENT APPROACH TO PREVENTING FALLS FROM HEIGHT Introduction Preventing falls is a priority for the Labour Group of the Ministry of Business, Innovation and Employment. From 1 July 2012,
More informationHow To Prevent An Accident From Happening
8-2.001 January 2011 Reducing slips, trips and falls in the construction industry Introduction For construction industry employees, injuries resulting from a slip, trip or fall (STF) are the most common
More informationConstruction occupational safety and health for construction workers. ILO Construction OS&H
Construction occupational safety and health for construction workers A training programme for construction workers This course is part of the ILO s Construction OS&H A systematic programme for improving
More informationIntroduction to Fall Protection. The University of Tennessee Office of Environmental Health & Safety
Introduction to Fall Protection The University of Tennessee Office of Environmental Health & Safety What is Fall Protection? Fall protection is the backup system planned for a worker who could loose his
More informationSAFETY TRAINING CLASSES & SERVICES LIST
SAFETY TRAINING CLASSES & SERVICES LIST CUSTOM CLASS ROOM TRAINING AVAILABLE, BACKED WITH ON-SITE SUPPORT SAFETY, TRAINING COURSES OFFERED BY OUR CERTIFIED ELITE RISK CONTROL TEAM: EM 385-1-1 (Military)
More informationExcavation Procedure. MIDGA Reviewed: 07/29/14 Effective: 06/20/09 Supersedes: Original Preparer: Owner: Approver: Safety Safety Safety
Procedure No.: SOP-0203 Page: 1 of 5 Preparer: Owner: Approver: Safety Safety Safety 1. PURPOSE The purposes of this procedure is to ensure safe excavation, reduce the potential of damaging underground
More informationManaging Workers Compensation Costs and Loss Control in the Workplace
Managing Workers Compensation Costs and Loss Control in the Workplace Managing Workers Compensation Costs and Loss Control in the Workplace Presented by: Denise Moore, CIC Association Programs Director
More informationSafe Operating Procedure
Safe Operating Procedure (Revised 5/14) PERSONAL FALL ARREST SYSTEMS Introduction In 2011, falls to a lower level were the second leading cause of occupational fatalities across all industries, claiming
More informationGuide to the Safety, Health and Welfare at Work (General Application) Regulations 2007. Part 4: Work at Height
Guide to the Safety, Health and Welfare at Work (General Application) Regulations 2007 Part 4: Work at Height 9 Guide to the Safety, Health and Welfare at Work (General Application) Regulations 2007 Part
More informationOSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
More informationFall Protection Basics for Construction Activities
Fall Protection Basics for Construction Activities Washington State has revised fall protection rules, effective April 1, 2013. This booklet provides an overview of the requirements. www.lni.wa.gov/safety
More informationPreventing Slips, Trips & Falls. Gary A. Higbee EMBA CSP
Preventing Slips, Trips & Falls Gary A. Higbee EMBA CSP Agenda Introduction Compliance Assessments Human factors Conclusion Did You Know? Did you know that slips trips and falls are responsible Did you
More informationInjury Prevention for the Construction Industry
Injury Prevention for the Workers in the construction industry encounter a variety of hazards, some of which can lead to serious injuries and fatalities. This fact sheet: Increases awareness of the primary
More informationProcedure. Working at Heights. 1. Purpose. 2. Scope. 3. Definitions. 4. Planning. 4.1. QUT risk check. 4.2. Work at Height permit
Procedure Working at Heights 1. Purpose The purpose of this procedure is to establish compliance requirements and specify precautions to be taken during the conduct of work at height within QUT to prevent
More informationOne-third of all fatalities in the U.S. construction
Guardrail systems: Fall prevention for floor and wall openings and open-sided floors One-third of all fatalities in the U.S. construction industry result from falls from elevations. Falls from elevations
More information68 Metal Industry Guidelines for Safe Work
3 68 Metal Industry Guidelines for Safe Work section 3 high-risk 3 activities Metal Industry Guidelines for Safe Work 69 section 3 high risk activities 3.1 working at heights Falls from heights have been
More informationDepartment of Commerce Safety Report
Department of Commerce Safety Report Safety Report Introduction This report provides an update to Department of Commerce (DOC) managers and employees on the progress of Departmental safety initiatives
More informationLOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR ELECTRICIAN PROGRAM
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR ELECTRICIAN PROGRAM Service Area: Industry Sector: Energy, Environment & Utilities Class Teacher (Please Print)
More informationAn Introduction to Practical Fall Protection for Pest Control
An Introduction to Practical Fall Protection for Pest Control Bird control work, to address this problem of birds on the edge of this five-foot-wide parapet some ten stories in the air, is one of many
More informationWALKING-WORKING SURFACES (SLIPS, TRIPS, AND FALLS)
WALKING-WORKING SURFACES (SLIPS, TRIPS, AND FALLS) Slips, trips, and falls constitute the majority of general industry accidents. They cause 15% of all accidental deaths, and are second only to motor vehicles
More informationRoofer Dies After Gust of Wind Knocks Him And A Co-Worker Off Roof
Roofer Dies After Gust of Wind Knocks Him And A Co-Worker Off Roof Incident Number: 13KY059 The fall took place from this structure. Photograph property of KY FACE Program Kentucky Fatality Assessment
More informationProgramme-Based Engagement (ProBE) for Fall From Heights. Statistics
Programme-Based Engagement (ProBE) for Fall From Heights Statistics For the past ten years, falling from height has been the number one cause of death in workplaces in Singapore. It has accounted for 34%
More informationAccident/Near Miss Investigation Guidelines
Accident/Near Miss Investigation Guidelines Accident Investigation Introduction An accident, incident or near miss has occurred, now what? Whether it is an accident, incident or near miss, it is imperative
More informationSlips, trips, falls and ladder safety
Slips, trips, falls and ladder safety OSHA 11: Slips, Trips, Falls and Ladder Safety 1 OSHA 11: Slips, Trips, Falls and Ladder Safety Slips, Trips and Falls Learning Objectives By the end of this lesson,
More informationQUESTIONS AND ANSWERS ON NEW FALL PROTECTION LEGISLATION
QUESTIONS AND ANSWERS ON NEW FALL PROTECTION LEGISLATION 50.4(1) An owner of a place of employment, an employer and a contractor shall each ensure that each component of a fall-protection system is inspected
More informationWelcome to the safe@work Retail Module.
Welcome to the safe@work Retail Module. Have you read the General Module, completed the test and printed your safe@work General Award of Attainment? The Retail Module should be done AFTER the General Module.
More informationTremline Pty Ltd trading as The Hills Bark Blower
JSA No: Rev: 10011 Date: 10010 ABN 1 07 880 6 Website: wwwbarkblowercomau Job Number Start Time: Vehicle : Max Length Hose Date: Company Name: Product: Quantities Depth Job site address: Description of
More informationFall Protection and Fall Prevention. San José State University Environmental Health and Safety Facilities Development & Operations
Fall Protection and Fall Prevention San José State University Environmental Health and Safety Facilities Development & Operations Learning Objectives To understand the hazards of falls To understand when
More informationEnvironment, Health and Safety Technical Guidance
Environment, Health and Safety Technical Guidance SOP-06 Working at Height Produced by Environment & Safety Office Campus Facilities Department Table of Contents 1 Overview... 1 1.1 Purpose... 1 1.2 Hazards
More informationTotal s Golden rules
Total s Golden rules Golden rule No. 10: Work at height A century ago Shocking, right? And yet it s still happening today Foreword The Group s activities all involve work at height, at varying frequencies.
More informationEntry Level Award in Workplace Hazard Awareness
Entry Level Award in Workplace Hazard Awareness Student resource sheets www.britsafe.org Membership Training Qualifications Audit and Consultancy Audit and Policy Consultancy and Opinion Policy Awards
More informationSITE SPECIFIC FALL PROTECTION PLAN
1 THIS PLAN IS SPECIFIC TO: PROJECT & ADDRESS 1.1 THIS PLAN IS SPECIFIC TO THE FOLLOWING AREA(S) ON SITE: Parkade level: Typical level: Other: Between G/L: 1.2 THIS PLAN IS APPLICABLE TO THE FOLLOWING
More informationThere is no water, surface tension cracks, nor other environmental conditions present that reduce the stability of the excavation.
Part 1926 Subpart P Introduction The Occupational Safety and Health Administration (OSHA) issued its first Excavation and Trenching Standard in 1971 to protect workers from excavation hazards. Since then,
More informationFALL PROTECTION PROGRAM
FALL PROTECTION PROGRAM Page 2 of 15 Table of Contents Applicability... 3 Overview... 3 Definitions... 3 Responsibilities... 5 Risk Assessment... 6 Risk Management... 7 Roof Access Procedure 10 Rescue
More informationLife Saving Rules SAFETY BY CHOICE, NOT BY CHANCE
Life Saving Rules SAFETY BY CHOICE, NOT BY CHANCE Foreword from Kevin Reinhart The 12 Life Saving Rules are a part of Nexen s continued commitment to create a safe work environment for our employees. The
More informationConstruction Employers Federation. A Best Practice Guide to Preventing Slips, Trips and Falls
Construction Employers Federation A Best Practice Guide to Preventing Slips, Trips and Falls FOREWORD Some of you may be surprised to know that slips and trips are one of the most common causes of serious
More informationRISK MANAGEMENT AND THE THE RISK ASSESSMENT METHOD STFC TRAINING MANUAL
RISK MANAGEMENT AND THE THE RISK ASSESSMENT METHOD STFC TRAINING MANUAL Rev 1.4, Issued May 22, 2012 Author: G J Baker Issue No: 1.4 Issue Date: 22/05/2012 Page 2 of 16 CONTENTS INTRODUCTION... 3 FLOW
More informationCIRCULARS / HSQE BULLETINS
CIRCULARS / HSQE BULLETINS T0: APPLICABLE FOR: MASTER ALL VESSELS CHIEF ENGINEER TANKER VESSELS TANK FARM DOCUMENT TYPE: SAFETY BULLETIN DOCUMENT NO. 03 ENVIRONMENTAL BULLETIN ISSUE DATE (dd/mm/yy) 10/03/2010
More informationSlips Trips and Falls Protocol
Page No: Page 1 of 8 1.0 PURPOSE To provide advice and guidance to all persons involved in organizing, planning, managing work construction related activities to eliminate and reduce risk of injury from
More informationHazard/Risk Identification and Control Procedure
Hazard/Risk Identification and Control Procedure Introduction Hazard identification and the steps taken to minimize the risks associated with identified hazards are a critical component of working safely.
More informationElectrical Wiring Methods, Components and Equipment for General Use. Approved for Public Release; Further Dissemination Unlimited
Electrical Wiring Methods, Components and Equipment for General Use Approved for Public Release; Further Dissemination Unlimited At the completion of this unit you shall be able to: 1. Utilize section
More informationFALL PROTECTION WORK PLAN
FALL PROTECTION WORK PLAN INSTRUCTIONS A written fall protection work plan must be implemented by each employer on a job site where a fall hazard of 10 feet or greater exists, in accordance with OSHA Standards.
More informationFall Protection Equipment
Fall Protection Equipment Quick Tips #130 Introduction Before you can begin a fall protection program, you must identify the potential fall hazards in your workplace. Any time a worker is at a height of
More informationJob Safety Analysis. The Experienced Workers Compensation. Specialist RM144GOLF 1 WHAT IS JOB SAFETY ANALYSIS? 2. Break the Job Down
Job Safety Analysis WHAT IS JOB SAFETY ANALYSIS? Job Safety Analysis (JSA) is a cost effective tool to review job methods and uncover hazards. Once the hazards are known and recorded, solutions can be
More informationWORK AT HEIGHT UNIT 4
WORK AT HEIGHT UNIT 4 WHAT IS WORKING AT HEIGHT? The Working At Height Regulations 2005 define working at height as:- Any work above or below ground level where a fall would result in personal injury.
More informationA 53-Year-Old Male Iron Foreman Dies After Fall From Steel Decking
A 53-Year-Old Male Iron Foreman Dies After Fall From Steel Decking Incident Number: 07KY071 Location where foreman fell. Kentucky Fatality Assessment and Control Evaluation Program Kentucky Injury Prevention
More informationPREVENTION OF FALLS WORKING ON ROOFS
PREVENTION OF FALLS WORKING ON ROOFS 1ST EDITION JUNE 2005 The following information is provided for people in the workplace who have responsibilities under the Occupational Health and Safety (OHS) Act
More informationIncident Investigations Handbook
Incident Investigations Handbook The following agencies may respond to an incident (insert phone numbers of your location) Police Fire/rescue Ambulance Coroner WorkSafeBC BC Safety Authority ICBC BC Hydro
More informationRisk Assessment Tool (example only)
HAZARD IDENTIFICATION & RISK ASSESSMENT TOOL Hazard identification You have an obligation to identify, assess and control any foreseeable hazards that may result as a consequence of your actions. If it
More informationKELLER S 5-MINUTE WORKPLACE SAFETY TALKS
KELLER S 5-MINUTE WORKPLACE SAFETY TALKS Machine Guarding An Overview Overview Of Topic Machine operators who understand a machine s hazards and how to control them will have a reduced risk of injury.
More informationFall Protection System: A system put in place to protect workers from falling. (i.e. installation of guardrails, fall arrest, fall restraint, etc.
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More informationPreventing slips, trips, and falls
Many workers are injured annually due to falls on walking and working surfaces. These injuries account for a significant percentage of lost-time injuries. Not only are slips, trips, and falls an economical
More informationNorth Dakota State University Slips, Trips, & Falls Program
North Dakota State University Slips, Trips, & Falls Program I. Introduction The United States Department of Labor and North Dakota Risk Management accounts that slip, trips, and falls constitute the majority
More informationRRC SAMPLE MATERIAL WORKING AT HEIGHT- HAZARDS AND RISK CONTROL LEARNING OUTCOMES
Managing and Controlling Hazards in International Construction Activities WORKING AT HEIGHT- HAZARDS AND RISK CONTROL ELEMENT 10 LEARNING OUTCOMES On completion of this element, you should be able to demonstrate
More informationFall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
More informationHow To Prevent Accidents At Work
2 Preventing vehicle accidents Construction work is considered to be one of the most hazardous industrial activities in the EU. The rate of injury in the construction industry is higher than in other industries.
More informationOHSMS Implementation Guide
OHSMS Implementation Guide Developed by the Employee Health Unit, Department of Education and Early Childhood Development and Marsh Pty Ltd. Published by the Employee Health Unit, Department of Education
More informationIntroduction to Fall Protection
Introduction to Fall Protection with John Evinger CRSP (204)228-8277 INSERT YOUR LOGO HERE Expected results of the day Today I will provide you with information to make you realize that you don t have
More information