Sensor Bin. Use and care guide (SWKA4200 all colours) Help line s 2 year. v1.0. Est We love what we do. we re proud of our quality

Transcription

1 Est.1931 s 2 year GUARANTEE We love what we do we re proud of our quality Sensor Bin Use and care guide (SWKA4200 all colours) Help line v1.0 Sensor Bins_UG.indd 1 12/08/ :08

2 IMPORTANT INFORMATION - RETAIN FOR FUTURE USE GETTING THE BEST FROM YOUR SENSOR BIN Thank you for choosing this Swan stainless steel sensor bin. Please read these instructions carefully, they will tell you how to get the best out of your product. Swan sensor bins are made from high grade, easy to clean, hygienic stainless steel that will looks great and give many years of faithful service. Love Your Sensor Bin! Always site your bin on a level surface that can withstand the weight of the bin and its contents Try not to site your bin in direct sunlight or any places where it might get hot/warm as this could lead to unpleasant odours. Avoid placing the bin in a contained space and ensure that any obstacles don t block the inductive window within a 2 metre distance. Avoid placing your bin where it might pick up splashes from cooking etc Regularly clean your bin with a non-abrasive cleaner, using a soft cloth. Dry thoroughly after cleaning. Do not use wet cloth near the sensor panel Feel free to use scented bin fresheners 2 Sensor Bins_UG.indd 2 12/08/ :08

3 This product is designed to be opened either automatically - via infrared sensor, or by using the manual button. It will automatically open when your hand moves past the sensor and automatically close after your hand moves away. When you press the manual button the bin will open. Press it again to automatically close. Once the lid is closed the bin will revert back to automatic mode. The product is composed of two parts: lid cover and main body. The sensing point is located in front of the lid just above the light panel Please tear off the label on the cover before using the bin. FITTING THE BATTERIES Open the cover of the battery case at the bottom of the dustbin and insert 4xAA batteries (not included) and replace cover. Place the bin liner in the center of the bin and fold the top of the bag over the edge of the bin. Replace the lid cover. Turn on the power switch at the back of the bin. The red indicator light with be lit for 3 seconds and then flashes once every 4 seconds to show that it is working and ready for use. The batteries can last 3-6 months based on the bin lid opening and closing 20 times a day. High alkaline batteries can last up to 2 years on standby only. If the bin fails to operate normally, it may mean the batteries are running low, or need replacing. Please avoid mixing brands, or old batteries. To prolong the use of batteries, and life of the motor, avoid staying in sensing mode for an unduly long time. SENSING BUTTON HOW TO USE To open the bin, hold your hand 15-20cm above the sensor and it will open automatically within 0.5 of a second. Once your hand is removed from the sensor area, it will close automatically within 5-6 seconds. Keeping your hand within the sensor area will keep the lid open. 3 Sensor Bins_UG.indd 3 12/08/ :08

4 HOW TO USE INDICATOR LAMP IDENTIFICATION The indicator light flashes red (every four seconds) When the lid opens, the indicator light shows green. When the lid closes, the indicator light shows red Sensing mode / Standby state. Red light flashes once every 4 seconds. CAUTION 1. Do not apply any external power to the cover when it is in use. 2. ONLY Use type AA batteries 3. Do Not use water to rinse bin cover or battery compartment. You can wipe with damp cleaning cloth when the power is off. 4. Avoid using the bin in a moist or steamy environment. 5. Keep the inductive window away from direct sunlight or lamplight. 6. Do not place the bin close to high frequency electronic products, i.e.: microwave ovens, energy saving lamps, or remote controls, etc. 7. Avoid placing the bin in a contained space and ensure that any obstacles don t block the inductive window within a 2 metre distance. 8. Do not use harsh abrasive detergents or scouring pads to clean the main stainless steel body. TECHNICAL Rated voltage: DC 6 Volts 4 Sensor Bins_UG.indd 4 12/08/ :08

5 2 YEAR WARRANTY This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty materials or workmanship, the faulty products must be returned to the place of purchase. Refund or replacement is at the discretion of the store. The following conditions apply: The product must be returned to the retailer with proof of purchase. The product must be used in accordance with the instructions contained in this instruction guide. It must be used only for domestic purposes. It does not cover wear and tear, damage, misuse or consumable parts. Swan Products Ltd has limited liability for incidental or consequential loss or damage. This guarantee is valid in the UK and Eire Only. This warranty does not affect your statutory rights WEEE DIRECTIVE Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit or for access to information about the recycling of electrical items. Please visit for access to information about the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life. 5 Sensor Bins_UG.indd 5 12/08/ :08

6 SERVICE If you need help with this product Call our help line on or visit our website You can also find us on Facebook and Twitter! 6 Sensor Bins_UG.indd 6 12/08/ :08

7 Check out our award winning Retro range at Est.1931 s 2 year GUARANTEE Scan this QR code to hear about our story We love what we do we re proud of our quality Find us on Facebook Copyright Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD Sensor Bins_UG.indd 7 12/08/ :08