Last Modified: Jun 15, 2016 degruchy's Ecologic Mortar... Just add water!
|
|
- Norah Fisher
- 1 years ago
- Views:
Transcription
1 Last Modified: Jun 15, 216 degruchy's Ecologic Mortar... Just add water! degruchy's Ecologic Mortar, in any of the stock colors, are simply a prepared blend of binder/aggregate/pigments to which you just add water, mix and go to work. Use it to repoint historic buildings, stucco and build new buildings which are considered a Green Application and result in a desired "Old World" Lime finish. It is as simple as mixing the mortar with water using a high torque industrial electric drill and a rigid paddle attachment in five-gallon pail or using a mason's paddle-style mortar mixer. The bag weight is 38.5 pounds. degruchy's Ecologic Mortar is coded as "DGM" followed by a number to correspond to a certain stock mortar color. "SCG" on bags means "Standard Construction Grade" where no pigment is added. Type "F" stands for "fine sands" for the application of butter joint repointing, fine jointed Ashlar stonework and for smooth stuccos. Type "G" stands for "coarse granules" for most all other applications. The granules in Type G are coarse in comparison to the fine sands in a Type F mortar, but the coarse granules are likened to regular mason's sand that meets ASTM C-144 standards for sharp, well-graded sand. The coarse grains are not as coarse as typical concrete sand. Both the Type F and Type G sands have four grades of sand making up the majority of the component sizes in the entire sand blend. All Stock Ecologic Mortars are made with NHL 3.5 and G type sand blend. Ecologic Mortar (F) with fine sand is also made with NHL 3.5 and is a stock product in the SCG Non-Pigmented color only. All other mixes are considered a custom blend. The advantage of the pre-blended material with sand and pigment already added is that the mixing can take place on each level of scaffold, if suitable conditions allow using the drill and paddle mixing method, with no excess sand piles or other bags of material stored on site. degruchy's Ecologic pre-blended mortar is all you need. Having all the materials in one bag reduces the temptation for masons to add Portland cement to the straight Natural Hydraulic Limes thinking this is what is customary when they use local type S hydrated lime. The preblended material ensures that the engineering of the mortar s final properties is kept in a high quality control environment with the right sand and the right pigments for consistent color. Page 1 of 5
2 Ecologic Lime Mortar And Color-Matching System NO Portland Cement is present degruchy s Ecologic mortars yet the stock material will still reach the required 75 p.s.i. required for a type N mortar while maintaining the high permeability required for repointing and repair to historic structures originally built with lime mortars. Ecologic Mortars can be used for sustainable applications in stucco, interior plaster, laying up of masonry units, stonework and as historic building repointing mortars. The colors shown below represent the 12 stock Ecologic Mortar colors. Disclaimer: Many factors affect how these images may appear on your computer monitor and how it prints on your specific printer. Print this page to provide a similar representation of the actual shades of all stock Ecologic Mortars. It is suggested that you purchase the Ecologic Mortar kit so that you may view each strip individually or hold one or more of these channels of dried mortar up to a building to determine a match when planning to duplicate a repointing mortar. Page 2 of 5
3 Ecologic Lime Mortar And Color-Matching System NO Portland Cement is present degruchy s Ecologic mortars yet the stock material will still reach the required 75 p.s.i. required for a type N mortar while maintaining the high permeability required for repointing and repair to historic structures originally built with lime mortars. Ecologic Mortars can be used for sustainable applications in stucco, interior plaster, laying up of masonry units, stonework and as historic building repointing mortars. 4 Examples of custom mixes are included in the Ecologic Mortar Kit: Disclaimer: Many factors affect how these images may appear on your computer monitor and how it prints on your specific printer. Print this page to provide a similar representation of the actual shades of all stock Ecologic Mortars. It is suggested that you purchase the Ecologic Mortar kit so that you may view each strip individually or hold one or more of these channels of dried mortar up to a building to determine a match when planning to duplicate a repointing mortar. Page 3 of 5
4 Ecologic Mortar Type G NHL 3.5 Ready Mix Ecologic mortar G is a premixed pure & natural hydraulic lime and sand mortar for building, pointing, repointing, stucco work, plastering, and finishing in a variety of colors. The absence of cement, ashes, gypsum, and other pozzolanic additions together with its other qualities make Ecologic mortar G highly suitable for repair and conservation work on traditional, vernacular, and historic buildings. In new build the properties of Ecologic mortar G will allow the reduction of strategically placed control joints in new building, dispersion of condensation, and will accommodate small settlement movements. Ecofriendly Characteristics: High vapor exchange qualities Produced with lower energy than cementitious mixes Re-absorption of CO2 in curing Will not deteriorate timber Possibility of recycling the materials used in buildings Elimination of painted finishes Granulometry: G granulometry using US Standard Test Sieve #16 (1.18mm) to #2 (.75mm) for masonry, pointing, dubbing out, first and main coats on renders and rough finishing coats. Packing: Ecologic mortar G 38.5lbs (17.5kg) Consumption: (See Ecologic mortar Consumption Chart) Preperation: In ordinary drum mixers (mix for about 5 minutes) Water Addition: Ecologic mortar G:.6 gallons (2.25 liters).65 gallons (2.5 liters) per bag of 38.5lbs. (17.5kg) Application: On clean and dry background not water proofed. Dampen adequately dry or high suction surfaces. Do not apply at temperatures below 4ºF (5ºC) or above 85ºF (3ºC). Protect against strong rain, frost, drying wind or direct strong sun until sufficient hardening has occurred. Application by Spray Gun: Possible. Please consult us. The above details are given for information purposes only. Final dosages and application should be checked with our technicians. The Factory reserves the right to alter specifications. Page 4 of 5
5 Comparison Blends NHL vs. Cement Ecologic NHL 1:2.5 Type N Cement 1:1:6 Type O Cement 1:2: oz 2 g 2 g INCH 23/64 9/32 9/32 H lb/cu.ft % days days Permeability vapor exchange. gr of air x m2 x hour x mmhg Water content Water to binder ratio Penetration Set (beginning) Bulk density (no curing) Air content Elasticity Moduli Flexual strength Compressive strength Mpa PSI PSI Shrinkage at mm.m Water absorbtion L.h.m g.min Capillarity The above details are given for information purposes only. Final dosages and application should be checked with our technicians. The Factory reserves the right to alter specifications. Page 5 of 5
Resurfacing Concrete. Page 1 of 5
Resurfacing Concrete Materials List QUIKRETE Concrete Resurfacer (No. 1131) (see calculator on page 5 for quantity needed) QUIKRETE Concrete and Stucco Wash (No. 8601) QUIKRETE Concrete Sealer (No. 8800)
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES Hydrated Masons Lime Characteristics Type S (Special) hydrated lime is a fine, white, high purity product which has been specially hydrated for convenient,
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
LAYING BLOCK AND BRICK
LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct
cement Masonry Cement Engineered for quality and reliability, Lafarge cements for masonry deliver consistent performance. page 2 Lafarge Cement
cement Masonry Cement Engineered for quality and reliability, Lafarge cements for masonry deliver consistent performance. page 2 Lafarge Cement Lafarge in North America The Lafarge Group is the world leader
MONOBASE RU/ SIDER-PLAST FINISH THE ULTIMATE HARD-COAT/ACRYLIC FINISH SYSTEM
SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com MONOBASE RU/ SIDER-PLAST FINISH THE ULTIMATE HARD-COAT/ACRYLIC FINISH SYSTEM 1.0 DESCRIPTION 1.1 General
Castle Conservation Range Preserving Britain s Heritage
Uniclass L623 CI/SfB Yq1 EPIC F2121 Feb 08 Castle Conservation Range Preserving Britain s Heritage St Pancras Station, London (Natural Hydraulic Lime 3,5 & Ketton Freestone). Castle Conservation Range
CGA Standard Practices Series. Article 600 Standard for Pozzolan Enhanced Grouts Used in Annular Seals & Well Destruction
California Groundwater Association An NGWA Affiliate State PO Box 14369 Santa Rosa CA 95402 707-578-4408 fax: 707-546-4906 email: cga@groundh2o.org website: www.groundh2o.org CGA Standard Practices Series
Application Instructions for Keystone Kool Deck on Existing Concrete
Application Instructions for Keystone Kool Deck on Existing Concrete REQUIRED MATERIALS Keystone Kool Deck PTA Bonding Agent Water 20 Mesh Marble Sand White Portland Cement OPTIONAL TOOLS Mortex Ad-Tex
SEE HOW TO MAKE LIME PLASTER WHY USE LIME? PATTI STOUTER, BUILD SIMPLE INC. FEBRUARY 2013
SEE HOW TO MAKE LIME PLASTER PATTI STOUTER, BUILD SIMPLE INC. FEBRUARY 2013 WHY USE LIME? Lime plaster forms a light, clean, and durable surface that is resistant to weather and mold. A thin layer attaches
Stuccoing Systems. Three-Coat Stuccoing
Stucco is an attractive and durable cement-based coating frequently applied to masonry and properly prepared wooden, gypsum wallboard, and expanded polystyrene insulation board surfaces. Stucco is usually
Specifications. PermaTone, Inc. Manufacturer s Long Form Specifications Interior Finish Coatings PF-405
PermaTone, Inc. Manufacturer s Long Form PF-405 PART I GENERAL 1.01 SUMMARY This document provides requirements for the proper specification, design, use and installations of PermaTone specialty interior
Technical Advice Note
Technical Advice Note Topic: Specifications for and use of traditional wet dash lime harling Reference Number: TAN1 When to harl Prior to about 1930, virtually all harling was wet dash and where harling
Construction. Pre-Bagged Structural Waterproofing System. Product Description. Product Data. Tests. Form
Construction Product Data Sheet Edition 15/07/2013 Identification no: 01 07 05 04 001 0 000001 Sika 1 Pre-Bagged Structural Waterproofing System Product Description Pre-Bagged Structural Waterproofing
PROPERTIES AND MIX DESIGNATIONS 5-694.200
September 1, 2003 CONCRETE MANUAL 5-694.200 5-694.210 PROPERTIES OF CONCRETE PROPERTIES AND MIX DESIGNATIONS 5-694.200 Inspectors should familiarize themselves with the most important properties of concrete:
These recommendations generally follow the Construction Specifications Institute (CSI) Master Format.
TECHNICAL BULLETIN Suggested Specification for White Concrete Floors Specifier Notes: 1. The Architect or Engineer should review the contents and adopt the suggested language as appropriate, ensuring it
How To Make Concrete At Site? M 25 Example
How To Make Concrete At Site? M 25 Example By Er. Kaushal Kishore, Materials Engineer, Roorkee PORTLAND CEMENT: Joseph Aspdin, a mason at Leeds prepared a cement in 1824 by heating a mixture of finelydivided
ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials
ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials SECTION 03 92 50 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,
K2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
Construction Materials Testing. Classes of Test
Construction Materials Testing Classes of Test February 2014 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected by copyright under the Commonwealth of Australia
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA.
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA October 21, 2011 888.01 General 888.02 Materials 888.03 Concrete Proportioning 888.04
Mortars for Brickwork - Selection and Quality Assurance
TECHNICAL NOTES on Brick Construction 1850 Centennial Park Drive, Reston, Virginia 20191 www.gobrick.com 703-620-0010 Mortars for Brickwork - Selection and Quality Assurance 8B October 2006 Abstract: This
BEST PRACTICE GUIDE. Fibrelime Premixed Universal Plaster and Render
BEST PRACTICE GUIDE Fibrelime Premixed Universal Plaster and Render Contents: Fibrelime description Fibrelime suitability Preparation before application Application Aftercare Painting General Recommended
ELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
GRADATION OF AGGREGATE FOR CONCRETE BLOCK
GRADATION OF AGGREGATE FOR CONCRETE BLOCK Although numerous papers have been written concerning the proper gradation for concrete mixes, they have generally dealt with plastic mixes, and very little published
Repointing Stone and Brick
TECHNICAL NOTE No. 37 April 1990 Updated January 2006 Repointing Stone and Brick (FORMERLY REPOINTING STONEWORK) 1. Historical Note Repointing of stone or brick walls is often carried out in conjunction
Construction. One component cementitious mortar fibre reinforced for flexible waterproofing. Product Description. Product Data. Tests.
Product Data Sheet Edition 17/03/2015 Identification no: 02 07 01 01 001 0 000180 Sikalastic -1K Sikalastic -1K One component cementitious mortar fibre reinforced for flexible waterproofing Construction
SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.
SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,
Cement Plaster. www.qatarplaster.com
Cement Plaster www.qatarplaster.com COMPANY PROFILE Qatar Plaster (QP) is a leading manufacturer of dry mix products based in Mesaieed Industrial City Doha, Qatar. Qatar Plaster (QP) has come up with a
FIXIT.CH. Aerogel Insulating Plaster System. Handling Guidelines. Easy to use. Mineral based. 0.028 W/mK BAUSTOFFE MIT SYSTEM
FIXIT.CH Aerogel Insulating Plaster System Handling Guidelines BAUSTOFFE MIT SYSTEM λ 0.028 W/mK Mineral based Easy to use Efficient building insulation using space technology Aerogel high-performance
SCG / SELF CONSOLIDATING GROUT
SCG SELF CONSOLIDATING GROUT U. S. A. DIVISION MASONRY PRODUCTS 04 Structurally Sound. Highly Fluid. SPEC MIX Self Consolidating Grout (SCG) is a dry preblended grout specifically designed to be highly
Concrete Repair. Applications and Procedures
Concrete Repair Applications and Procedures Objectives Identify what surface preparation is needed Identify typical modes of failure and testing methods How to choose the correct material for the repair
The Minnesota Lath and Plaster Bureau Repairing Cracks in Stucco
The Minnesota Lath and Plaster Bureau Repairing Cracks in Stucco Disclaimer: This guide contains general information on stucco installation and related materials. It is provided as a guide only and is
SILICA FUME IN SHOTCRETE. Authors: D.R. Morgan and J.T. Wolsiefer
SILICA FUME IN SHOTCRETE Authors: D.R. Morgan and J.T. Wolsiefer This paper was originally published in the proceedings of the CANMET/ACI International Workshop on the use of Silica in Concrete in Washington,
SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
Portland Portland cement type I (normal), II/V, (sulfate res.) or IV (slow set). 94lb bags. Strength in minimal water. Min cement per yd3 = 470lb
House Structural Concrete & Plaster Mixes Rev. 11/23/11, bsc 1. General Ingredients & Notes (All) Portland Portland cement type I (normal), II/V, (sulfate res.) or IV (slow set). 94lb bags. Strength in
MASONRY INFORMATION. Selecting and Specifying Mortar and Grout for Unit Masonry. Introduction. Desirable Mortar Properties. Selection of Mortar
Portland Cement Association MASONRY INFORMATION Selecting and Specifying Mortar and Grout for Unit Masonry Introduction Masonry mortar and masonry grout are key materials in unit masonry construction.
Shotcrete Quality Control and Testing for an Underground Mine in Canada
Shotcrete Quality Control and Testing for an Underground Mine in Canada By Dudley R. (Rusty) Morgan and Mazin Ezzet AMEC Earth & Environmental, a division of AMEC Americas Limited SHOTCRETE FOR AFRICA
Armourwall Stucco Assemblies
Armourwall Stucco Assemblies Armourwall Stucco Assemblies Provide The Parex Advantage The Parex tradition of leadership in the building industry began in 1986 with a commitment to growth based on unparalleled
VITCAS FIREPLACE RENDER & HEAT RESISTANT PLASTER WALL. 400mm
FIEPLACE ENDE & HEAT ESISTANT PLASTE WALL Heat esistant Filler max. 6mm Heat esistant Plaster min. 10mm AEA OF HIGH HEAT Fireplace ender PVA Adhesive Sealer 900mm 400mm 400mm 400mm ISO 9001 APPOVED 8 Bonville
September 2014. Joint
September 2014 Joint appearance and mortar use 2 Mortar Joints This paper outlines some of the background, composition and use of masonry mortars, with particular reference to those used for the construction
TECHNICAL DATA SHEET. TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL. Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079
TECHNICAL DATA SHEET TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079 geral@ topeca. pt www.topeca.pt juntaemcor plus+ Pág. 2 Sanded texture
Backstop NT. Backstop NT Application Instructions DS181. A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier
Backstop NT A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier Backstop NT Application Instructions CHECKLIST PRIOR TO THE INSTALLATION OF BACKSTOP NT TEXTURE,
Standard Method for Sampling and Analysis of. of Chlorine Containing Bleaches. Soap Products
GUIDE SPECIFICATION FOR GENERAL CLEANING AND REMOVAL OF MOLD AND MILDEW ON EXTERIOR INSULATED AND FINISH SYSTEMS AND STUCCO DIVISION 07240 and DIVISION 09240 8/05 PART I: GENERAL 1.01 DESCRIPTION AND SCOPE
GYPSUM BOARD, GYPSUM PANEL PRODUCTS AND PLASTER
CHAPTER 25 GYPSUM BOARD, GYPSUM PANEL PRODUCTS AND PLASTER User note: Code change proposals to this chapter will be considered by the IBC Structural Code Development Committee during the 2016 (Group B)
Choosing the Right Mortar for the Job
Choosing the Right Mortar for the Job by Michael Schuller, P.E. President, Atkinson-Noland & Associates 2619 Spruce St. Boulder, CO 80302 www.ana-usa.com Modern material technology has given us strong
DENSITY (UNIT WEIGHT), YIELD, AND AIR CONTENT (GRAVIMETRIC) OF CONCRETE FOP FOR AASHTO T 121 (11)
DENSITY (UNIT WEIGHT), YIELD, AND AIR CONTENT (GRAVIMETRIC) OF CONCRETE FOP FOR AASHTO T 121 (11) Scope This procedure covers the determination of density, or unit weight, of freshly mixed concrete in
Development of conservation compatible new materials for envelope retrofitting of historic buildings
Development of conservation compatible new materials for envelope retrofitting of historic buildings Carsten Hermann, Senior Technical Officer, Historic Scotland Glasgow is one of seven EFFESUS case study
RECYCLED CRUSHED CONCRETE BASE COURSE
Section 02713 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Recycled crushed concrete base (RCCB) course. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices. 1. Payment for RCCB is on per ton basis furnished
Hanson Building Sand Technical Data Sheet
Hanson Building Sand A washed sand conforming to BS EN 13139:2013 Aggregates for mortar. The typical moisture content is 7.5%. Production of mortar, for the construction of masonry brick and block work.
:: ARTIFICIAL SAND :: Zone One Sand : Zone Two Sand :
:: ARTIFICIAL SAND :: Natural sand are weathered and worn out particles of rocks and are of various grades or size depending on the accounting of wearing. The main natural and cheapest resource of sand
The Cementitious and Pozzolanic Properties of Fluidized Bed Combustion Fly Ash
2009 World of Coal Ash (WOCA) Conference - May 4-7, 2009 in Lexington, KY, USA http://www.flyash.info/ The Cementitious and Pozzolanic Properties of Fluidized Bed Combustion Fly Ash By Will Stevens 1 Thomas
Concrete Waterproofing Systems
Concrete Waterproofing Systems Triton s concrete waterproofing systems are designed for the protection and waterproofing of new or existing concrete structures. The range includes integral waterproofing
Ultracolor CG2. Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence
IN COMPLIANCE WITH EUROPEAN STANDARDS Ultracolor CG2 CEMENTITIOUS GROUT Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence WHERE TO USE Interior
Specification Guidelines
Specification Guidelines Heritage Traditional Building Products Ltd. T: +44 (0)28 2568 5055 Fax: +44 (0)28 2568 5831 Email: info@heritageltd.com Web site: www.heritageltd.com IMPORTANT NOTICE The company
Pavement Thickness. esign and RCC-Pave Software. Roller-Compacted Concrete Pavement: Design and Construction. October 24, 2006 Atlanta, Georgia
Roller-Compacted Concrete Pavement: Design and Construction Pavement Thickness esign and RCC-Pave Software Gregory E. Halsted, P.E. Pavements Engineer Portland Cement Association October 24, 2006 Atlanta,
Manufactured Stone Veneer Installation Instructions
Manufactured Stone Veneer Installation Instructions Published: 8/14/2008 Revised: 6/25/2010 Table of Contents PART 1 -- INTRODUCTION PART 2 -- MATERIAL REQUIREMENTS PART 3 EXECUTION REQUIREMENTS PART 4
SECTION 03 54 00 RESURFACING CAST IN PLACE CONCRETE
Page 1 SECTION 03 54 00 RESURFACING CAST IN PLACE CONCRETE Specifier Notes: This guide specification is written according to the Construction Specifications Institute (CSI) format. The section must be
EDUCATIONAL GUIDE TO PROPERTIES OF MASONRY MORTAR
EDUCATIONAL GUIDE TO PROPERTIES OF MASONRY MORTAR Contents Page Introduction 3 Specifying mortar 3 Properties of plastic mortar 4 Properties of hardened mortar 8 Glossary of terms 13 Bibliography 14 Self-assessment
colorstuk rapid n Technical Sheet Recommended use Materials Substrates Characteristics
Technical Sheet colorstuk rapid n colorstuk rapid n is a type CG 2 high-performance, cement-based grouting material as per EN 13888, for grouting joints from 1,5 to 15 mm. Suitable for all kinds of ceramic
Chapter Two Types of Cement The properties of cement during hydration vary according to:
Chapter Two Types of Cement The properties of cement during hydration vary according to: Chemical composition Degree of fineness It is possible to manufacture different types of cement by changing the
EXPERIMENTAL INVESTIGATION ON BEHAVIOUR OF NANO CONCRETE
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 2, March-April 2016, pp. 315 320, Article ID: IJCIET_07_02_027 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=2
EDUCATIONAL GUIDE TO PROPERTIES OF RENDERING MORTAR
EDUCATIONAL GUIDE TO PROPERTIES OF RENDERING MORTAR Contents Page Introduction 3 Specifying rendering mortar 4 Properties of fresh rendering mortar 6 Properties of hardened rendering mortar 6 Rendered
PRODUCT GUIDE CEMENT & CONCRETE PRODUCTS. January, 2014
PRODUCT GUIDE CEMENT & CONCRETE PRODUCTS January, 2014 Fast-Setting Concrete No Mixing Required Target Products Ltd Dealer BC AB MB 2013 TABLE OF CONTENTS HD SKU BAGGED PRODUCTS ITEM # PRODUCT PAGE CONCRETE
CA-48 TECHNICAL SPECIFICATION
CA-48 TECHNICAL SPECIFICATION SafeLane surface overlay Pavement Substrate A Cargill Deicing Technology Product Providing customers with deicing solutions that save lives and enhance commerce. Helping to
Improving the flood resistance of your home. Advice sheet 4: Flood-resilient walls.
Improving the flood resistance of your home Advice sheet 4: Flood-resilient walls. This sheet provides guidance on identifying different types of wall, and reducing the flow of floodwater through them
2-part epoxy primer, levelling mortar and mortar screed
Product Data Sheet Edition 07/02/2008 Revision no: 01 Identification no: 01 08 01 02 007 0 00001 Sikafloor -156 2-part epoxy primer, levelling mortar and mortar screed Construction Product Description
Section 04810 EXTERIOR STONE VENEER Full Mortar
Full Mortar PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Portland cement mortar bed 2. Stone Veneer 3. Expansion and control joints. 4. Portland cement and hydraulic mortar and grout. 5. Sealer and
A GUIDE TO CHOOSING THE RIGHT LIME-BASED PRODUCTS FOR RESTORING MASONRY
A GUIDE TO CHOOSING THE RIGHT LIME-BASED PRODUCTS FOR RESTORING MASONRY Mape-Antique Range A guide to choosing the right LIME-based products and systems for restoring masonry To meet the latest requirements
LATICRETE 290 Premium Floor and Wall Thin-set Adhesive PRODUCT DESCRIPTION
LATICRETE 290 Premium Floor and Wall Thin-set Adhesive PRODUCT DESCRIPTION LATICRETE 290 Premium Floor and Wall Thin Set Adhesive is a high performance bagged cementitious powder to be mixed with either
CHAPTER NO. 27 QUANTITIES OF MATERIALS
CHAPTER NO. 27 QUANTITIES OF MATERIALS Note :- One cement bag weighs 50 kg. and measures 0.03472 cum. Sr. No. Description Unit Quantities Fine aggregates Coarse aggregates 1 2 3 4 5 6 27.1 Cement concrete
Specialty Cements. Dr. Kimberly Kurtis School of Civil Engineering Georgia Institute of Technology Atlanta, Georgia.
Specialty Cements Dr. Kimberly Kurtis School of Civil Engineering Georgia Institute of Technology Atlanta, Georgia Specialty Cements Portland cements do not always meet every need of the construction industry.
2.18 INTERIOR & EXTERIOR FINISHES 2.18.1 VAPOR & AIR BARRIERS
2.18 INTERIOR & EXTERIOR FINISHES 2.18.1 VAPOR & AIR BARRIERS The LOGIX wall assembly has no need for an additional vapor barrier, the solid concrete core covered with the low permeance EPS (Type II) foam
ASTM International Workshop for Local Architects, Engineers and Contractors. JW Marriott, Indianapolis, IN June 10, 2013
ASTM International Workshop for Local Architects, Engineers and Contractors JW Marriott, Indianapolis, IN June 10, 2013 1 Introduction Workshop is presented by: ASTM Committee C12 on Mortars and Grouts
Mold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
A Manufacturer s and Contractor s Guide to Coloring Ready Mix Concrete with Bayferrox C Iron Oxide Pigments
A Manufacturer s and Contractor s Guide to Coloring Ready Mix Concrete with Bayferrox C Iron Oxide Pigments Recommendations for the Ready Mixed Producer Do not use calcium chloride with color pigments.
EFFECT OF NANO-SILICA ON CONCRETE CONTAINING METAKAOLIN
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 1, Jan-Feb 2016, pp. 104-112, Article ID: IJCIET_07_01_009 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=1
Key Words: brick, grout, material properties, mortar, reinforcement, structural clay tile.
Technical Notes 3A - Brick Masonry Material Properties December 1992 Abstract: Brick masonry has a long history of reliable structural performance. Standards for the structural design of masonry which
Stone and Masonry Restoration
Stone and Masonry Restoration with Remmers Systems Cleaning Equipment Cleaning Chemicals Consolidation and Strengthening Restoration and Pointing Preservation and Conservation Stone and Masonry Restoration
BENTLEY ELEMENTS COLLECTION LVT
This document refers to the following products: Product Size Installation direction Seams treatment Elements Tiles See specifications 90 None Elements Planks See specifications Stair Step None Note: This
Module: 5 Lecture: 22
Module: 5 Lecture: 22 CEMENT INDUSTRIES INTRODUCTION Cement is broadly described as material having adhesive and cohesive property with capacity to bond the material like stone, bricks, building blocks
T R A N S F E R A B L E F U L LY
HSTOPS A WALL OF WATER 22 FT. HIG! F U L LY T R A N S F E R A B L E RESISTS10 PSI ! 1 F U L LY T R A N S F E R A B L E HSTOPS A WALL OF WATER 22 FT. HIG RESISTS10 PSI Guaranteed To Stop Water Even Under
1.5 Concrete (Part I)
1.5 Concrete (Part I) This section covers the following topics. Constituents of Concrete Properties of Hardened Concrete (Part I) 1.5.1 Constituents of Concrete Introduction Concrete is a composite material
SECTION 09225 ITALIAN INTERIOR LIME PLASTER FINISH GENERAL NOTES TO SPECIFIER:
3-Part Specification For RIALTO Italian Plaster Finishes VERO 2911 N. Orange-Olive Rd. Orange, CA 92865 Phone (714) 637-7341 Fax (714) 637-7364 E-mail: INFO@VERO-RIALTO.COM Website: WWW.VERO-RIALTO.COM
ISIDAÇ 40. building chemicals. Special cement for your special products!
ISIDAÇ 40 building chemicals Special cement for your special products! Çimsa ISIDAÇ 40 Calcium Aluminate Cement Building Chemicals Applications www.cimsa.com.tr ISIDAÇ 40 is a Calcium Aluminate Cement
CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS
AN ERGONARMOR COMPANY TECHNICAL INFORMATION SPECIFICATION FOR INSTALLATION 07/11 SUPERSEDES 04/00 PAGE 1 OF 6 CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS 1. SCOPE 1.1 This specification
LEGACY REPORT. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council. *Corrected March 2014
ICC-ES Legacy Report PFC-3700* Issued October 2003 www.icc-es.org (00) 423-57 (52) 99-0543 A Subsidiary of the International Code Council Legacy report on the 1997 Uniform Building Code and the 2000 International
Specification Guidelines: Allan Block Modular Retaining Wall Systems
Specification Guidelines: Allan Block Modular Retaining Wall Systems The following specifications provide Allan Block Corporation's typical requirements and recommendations. At the engineer of record's
STUCCOMAX Installation Specifications Exterior One-Coat Stucco over EPS Foam, PU Foams, Exterior Gypsum Board, MgO Board and Cement Block
STUCCOMAX Installation Specifications Exterior One-Coat Stucco over EPS Foam, PU Foams, Exterior Gypsum Board, MgO Board and Cement Block Description Uses Advantages StuccoMax is a truly green NON Portland
Manufacturing Quality Concrete Products
CEMEX USA - Technical Bulletin 8.0 Manufacturing Quality Concrete Products Establishing or Upgrading a Quality Program Overview The following guidelines were developed for MCP (manufactured concrete products)
NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT.
September 1, 2003 CONCRETE MANUAL 5-694.300 MIX DESIGN 5-694.300 NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT. 5-694.301
Acrylic & ElAstomEric FinishEs LaHabra Acrylic Finishes
Color Collection comparison of cementitious And Acrylic FinishEs Feature Cementitious Acrylic Application Thickness 1/8 inch (3 mm) 1/16 inch (1.5 mm) Helps to compensate for wall irregularities. Does
GYPSUM BOARD AND PLASTER
CHAPTER 25 GYPSUM BOARD AND PLASTER SECTION 2501 GENERAL 2501.1 Scope. 2501.1.1 General. Provisions of this chapter shall govern the materials, design, construction and quality of gypsum board, lath, gypsum
Specification for the Manufacture, Curing & Testing of Glassfibre Reinforced Concrete (GRC) Products.
Specification for the Manufacture, Curing & Testing of Glassfibre Reinforced Concrete (GRC) Products. The International Glassfibre Reinforced Concrete Association (GRCA) January 2016 The International
Rayite TM MDM. Model Duplicating Media. Two Steps To Perfect Model Duplication. United States Gypsum Company
Two Steps To Perfect Model Duplication Rayite TM MDM Model Duplicating Media is a unique two-component duplicating process specifically designed for use with all model and pattern materials, especially
SPECIFICATIONS. INTERLOCKING CONCRETE POROUS PAVING UNITS or Permeable Interlocking Concrete Pavers (PICP)
SPECIFICATIONS INTERLOCKING CONCRETE POROUS PAVING UNITS or Permeable Interlocking Concrete Pavers (PICP) Part 1 General 1.1 CONFORMITY Conforms to the requirements of the general conditions of the contract.
Mineral waterproof coating PCI Dichtschlämme
Mineral waterproof coating PCI Dichtschlämme 305 for basement walls, swimming pools and potable water tanks With official test certificate. FIELDS OF For indoor and outdoor use. For walls and floors. For
RHOPLEX MC-1834P Cement Mortar Modifier
RHOPLEX MC-1834P Cement Mortar Modifier Description is a low-odor acrylic polymer emulsion designed for modifying Portland cement compositions. The superior adhesion, ultraviolet light resistance, water
WATER PENETRATION TESTING OF STUCCO ON CONCRETE MASONRY CONSTRUCTION
WATER PENETRATION TESTING OF STUCCO ON CONCRETE MASONRY CONSTRUCTION for Florida Concrete & Products Association and NCMA Education and Research Foundation Conducted by: Masonry Information Technologists
Thin Veneer Stone Installation Guide
Thin Veneer Stone Installation Guide Complete step by step How-to guide for installing Thin Veneer Stone. Important: From pallet to pallet of natural thin veneer stone, as with any natural stone product,