Quality Assurance Manual

Size: px
Start display at page:

Download "Quality Assurance Manual"

Transcription

1 Quality Assurance Manual Prepared by: Date:...03/05/ Approved by:... Monthind Clean LLP Date:...03/05/

2 This Manual and the information contained therein is the property of Monthind LLP. It must not be reproduced in whole or in part or otherwise disclosed, without prior consent in writing from Monthind LLP. CONTENTS 1 VISION, MISSION AND VALUES OF MONTHIND LLP 2 COMPANY QUALITY POLICY/PLAN 3 DESCRIPTION OF COMPANY OPERATIONS 4 QUALITY MANAGEMENT SYSTEM 4.1 General Requirements General Quality Manual Control of Documents Control of Records 5 MANAGEMENT RESPONSIBILITY 5.1 Management Commitment 5.2 Customer Focus 5.3 Quality Policy 5.4 Planning Quality Objectives Quality Planning Responsibility and Authority Management Representative Internal Communications 5.6 Management Review General Review Input Review Output 6 RESOURCE MANAGEMENT 6.1 Provision of Resources 6.2 Human Resources General Competence, Awareness & Training 6.3 Infrastructure 6.4 Work Environment 7 PRODUCT REALISATION Issue 18 2

3 7.1 Planning of product realisation 7.2 Customer Related Processes Determination of Requirements Relating to the Product Review of Requirements Relating to the Product Customer Communication 7.3 Design and Development 7.4 Purchasing 7.5. Product and Service Provision Product and Service Provision Control Validation of Processes for Production and Service Provision Identification & Traceability Customer Property Preservation of Product 7.6 Control of Monitoring and Measuring Devices 8 MEASUREMENT AND MONITORING 8.1 General Customer Satisfaction Internal Audit Monitoring & Measurement of Processes Monitoring & Measurement of Product 8.3 Control of Non-Conformity 8.4 Analysis of Data 8.5 Improvement Continual Improvement Corrective Action Preventative Action BUSINESS CONTINUITY 9.1 Business Continuity plan APP 1 MONTHIND LLP STAFF STRUCTURE APP 2 LIST OF COMPANY PROCEDURES Issue 18 3

4 2 COMPANY QUALITY POLICY STATEMENT QM1 It is the policy of Monthind LLP to achieve and maintain a high standard of quality in all aspects of its operations and to continually satisfy the expectations of our customers in respect of all services offered. Monthind LLP aims to ensure that the needs of our customers are clearly understood and met through close liaison at all stages of service delivery. Monthind LLP is committed to effective Quality Management at all levels within the business. Monthind LLP will ensure in providing and maintaining its service to our customers that: We retain our values by managing our affairs according to a quality management system registered as complying with the requirements of ISO The Quality Policy is upheld and supported by management at all levels. Staff are appropriately trained to enable them to undertake their duties and given appropriate authority within the scope of their responsibilities. Competency of staff is maintained by continued training. An ethos of continual improvement & effectiveness of our Quality Management System will be maintained by the setting of quality objectives, with regular reviews undertaken. We will ensure that inspection requirements are determined and satisfied throughout all stages of service delivery. We will develop and maintain quality consciousness amongst all Company Employees. All appropriate documentation will be maintained, controlled and archived. Ultimate authority to give direction and interpretation of Policy, concerning quality aspects of Monthind LLP and our service lies with the Board of Directors. However, all management hold the responsibility for ensuring that the policy and all systems and procedures laid down by the Company are understood, correctly implemented and maintained at all levels within the organisation. Signed:...Finance Director Issue 18 4

5 Date: 03 th Issue 18 5

6 Monthind Clean LLP Quality Plan Quality Manual Environmental, Health & Safety Sales Enquiry - Tender - Quotation QP2 QP3 QP4 (QP5) QP11 Contract Review QP2 QP11 Cleaning Process Control Serive Performance Inspection Monitoring SPECIFICATION QP3 QP4 QP10 QP13 MONT001 QP2 QP4 QP8 QP14 Corrective Action Internal Audits Management Meetings Customer Complaints Site Inspections MONT 017/2 Issue 18 6

7 3 DESCRIPTION OF COMPANY OPERATIONS Monthind LLP operates a prestigious cleaning service concentrating its activities primarily in the East of England. Offering full facilities management services utilising carefully selected companies where appropriate. The performance of these companies is monitored in accordance with its quality policy. 4 QUALITY MANAGEMENT SYSTEM The Company's Quality System is numbered in an identical fashion to the standard and describes how its contractual requirements are met. 4.1 General Requirements General The competency of all personnel within Monthind plays an important role in ensuring that the services and requirements of customers and the International Standard are met. Regular training and meetings ensure that the effectiveness of the QMS is continually being improved Quality Manual The Company's Quality System is documented in the Quality Manual, which describes how it meets its contractual requirements and is part of the overall documentation of the organisation. Any areas, which are excluded from the QMS, are clearly identified. Procedures and other documents, which contain detailed processes of work, are part of the overall documentation of the organisation. See Appendix 2 for list of Company procedures. Forms in series MONT assist staff to operate the Quality Procedures and provide evidence of conformance to the Quality System Control of Documents Quality system documents will have controlled circulation within the Company. Procedures used to control the documents are described in QP1. Procedures relevant to each contract are held at point of use and all obsolete documents are promptly removed. Any procedures or booklets of external origin, which are relevant to the continuing performance of the Company, are maintained in a controlled manner within the Company as the Quality System documentation. An anti virus programme is held on the computer system which is continually checked to ensure the system is protected. Issue 18 7

8 All master files are held in secure cabinets for protection and clearly identified. Contracts, which have been terminated are archived and retained for five years Control of Records Records are maintained to provide evidence of conformity to requirements and of the effective operation of the quality management system. All records will remain legible, readily identifiable and retrievable. Records produced by the operation of procedures defined in or referred to from this Quality Manual are retained for a period of one year (plus current year). The quality records to be retained are as follows: Quality Manual Customer Complaints Inspection Records Training Records Internal Audits Supplier Assessment Questionnaires Quality Procedures Purchase Orders Contract Files Communication Books Superseded Quality Documents Master hard disks and back-up disks for computer records are taken on a regular basis and stored off site in a suitable fireproof container to prevent deterioration. 5 MANAGEMENT RESPONSIBILITY 5.1 Management Commitment The Directors and senior management are committed to the development, implementation and improvement of the quality management system. Regular meetings are held with all office personnel and field managers to ensure that the aims of the company are reviewed and achieved. Induction training for all field-based personnel is recorded on Induction Training Forms, which are completed on starting with the company. 5.2 Customer Focus Monthind strives via continuous improvement to achieve excellence in cleaning and facilities management. Monthind puts business integrity first giving value for money and tailoring its service to meet customer needs. Monthind s philosophy is based on fairness, courtesy, appreciation and fun. Monthind s policies reflect the importance attached to our role in the community and our social responsibilities. Issue 18 8

9 QM1 Monthind s strength is our people. Their performance is the measure of our excellence, and we never lose sight of the fact that we are only as good as our cleaning operatives. Monthind is committed to a policy of equal opportunities for all employees. Business Managers are appointed to ensure that customer needs are determined and fulfilled to ensure that customer satisfaction is not only achieved but also enhanced. Minutes of meetings between Customers and Monthind Management are held. Management meetings are held between Business Managers and Directors of Monthind to ensure that the aims of the Business Plan and other strategic business objectives are being achieved. 5.3 Quality Policy The Company Quality Policy is reviewed regularly by the Compliance Manager to ensure that the effectiveness and suitability of the objectives of the organisation are still appropriate. Monthind s aims are to reduce customer complaints and retain customers; the introduction of Business Managers should assist in this role; and to implement changes as directed by industry, customers or Board of Directors. The quality objectives are reviewed monthly as part of the Compliance Manager s Monthly Report. The objectives provide the framework to reduce customer complaints and retain customers. They will be measurable and achievable. 5.4 Planning Quality Objectives Monthind has introduced Monthind Maximiser, a reward scheme, which from 1 st September 2002 will cover all operational personnel. This is a reward and recognition scheme, which will reward staff for obtaining the Company s targets; it is both measurable and consistent with the quality policy. The Business Plan provides full details of the aims and objectives of Monthind. Monthly Management Meetings will ensure that the business plan objectives are reviewed and achieved Quality Planning On receipt of new contracts an implementation plan is raised, ensuring that all areas of the agreed specification are actioned and ordered accordingly. A copy of the implementation plan is issued to the customer in order to monitor start up progress. A Business Manager is appointed at the awarding of a contract to Monthind to ensure that there is a nominated person who has sole responsibility for the smooth running of the contract. The sub-contracted services must meet the customer s requirements and those of Monthind. A MONT038 Sales Handover Procedure is raised to ensure that operational details are received. Each contract is reviewed to ensure that all requirements are adequately defined and documented, any differences from the tender are resolved and that Monthind is able to meet all contractual requirements. Further details can be found in QP 11. When changes to the QMS are implemented, any Issue 18 9

10 other procedures will be changed if appropriate. Once a contract has been awarded the Business Manager will oversee the start up of the contract to ensure that all services are delivered and staff appointed if necessary. The Business Manager will hand over the contract to the Contract Manager within one month of the start date. 5.5 Responsibility, Authority and Communication Responsibility and Authority The Directors will ensure that responsibilities and authorities are defined and communicated within the organisation. Business Managers will be responsible for all activities on each of their designated contracts. Contract Managers will be responsible for service delivery on each of their designated contracts Management Representative The Compliance Manager has the authority to ensure the processes of the Quality Management System ISO 9001: are established, implemented and maintained. The Management Representative will report regularly to the Directors on the performance of the Quality Management System, including the need for improvement. The Management Representative will promote awareness of customer requirements throughout the organisation Internal Communications The updating of the computer system and the introduction of all office and field staff to facilities has enabled communications to reach all staff. Site manuals provide current procedures for carrying out daily tasks. Grievance procedures are regularly discussed with the field staff. Any queries regarding grievance can be referred to the Human Resources Administrator. The Human Resources Administrator has the facility to refer issues to Park City, an outside company who specialise in Employment Law. Action to be taken on customer complaints can be found in QP11 with an accompanying flow chart for ease of action. 5.6 Management Review General Review of the operation and effectiveness of the Quality System are conducted in accordance with the standard as follows: Monthly Board Meetings are held to discuss operational issues, whether the aims of the Business Plan are being achieved and on target, and any other business connected with the on-going performance of Monthind. Selected management personnel attend these meetings, minutes are held but discussions are confidential. Further details are held in QP9. Following the Monthly Board Meeting, Management Meetings are held monthly with all Business Managers to discuss matters arising from the Board Meeting, and the day-to-day running of the contracts, customer complaints, training, health and Issue 18 10

11 safety, and other areas of concern. Minutes of these meetings are held on the K- Drive server and ed to the management team. Each Business Manager then holds Team Meetings to discuss relevant issues arising from the Board, and management meetings. Minutes of these meetings are held by the Business Manager. Annual reviews are undertaken to ensure compliance with the Quality Policy, Quality System and Procedures, and Quality Objectives. The Compliance Manager compiles a detailed report which is discussed by the Board of Directors. The QMS is reviewed to ensure continuing suitability, adequacy and effectiveness. Details of any developments or amendments are recorded and maintained /3 Review Input/Output These meetings will include the performance of customer feedback, outstanding items from previous meetings, observations, and status of corrective and preventative action. The reviews will aim to ensure that improvements to the QMS and its processes are discussed and that the company has the resources both financially and in training to achieve these aims. Contract Managers are responsible for ensuring that all cleaning duties are completed, and that they have been performed to the standard agreed between the customer and Monthind LLP. The methods used to ensure that these responsibilities have been correctly discharged are described in QP11. A contact with the customer is made at least on a monthly basis. In general, sites are visited on a regular basis by Contract Managers who will carry out Quality Assurance Inspections via the Quality Assurance Inspection Form (MONT063), these will be signed off be signed off by the relevant Business Manager who will forward to the Compliance Department who will monitor trends and keep them on file. Contract Managers will also visit the sites during the cleaning period to ensure that the specifications agreed with the client are followed. There are occasions and practicability where a monthly visit is not made at the discretion of the Operations Director. The Compliance Manager will also make random visits to carry out site compliance inspections via the Client Site Compliance Inspection form (MONT065), these will be forwarded to the relevant Business Manager detailing any outstanding issues which require attention. The Compliance Department will keep all Client Site Compliance Inspection form on file and follow up any outstanding actions and close off accordingly. Final inspections for special one off cleaning operations, e.g. for builders prior to hand over to their customer, are performed by the Specialist Services Team Leader/Contract Manager and verified by a representative of the customer. 6 Resource Management 6.1 Provision of Resources Issue 18 11

12 Monthind s Business Plan, which is constantly reviewed by the Directors to ensure its effectiveness, details the resources and implementation to implement, maintain and improve the effectiveness of the QMS. The Business Plan will ensure staffing levels are maintained for delivery of service and to enhance customer satisfaction by meeting their objectives. 6.2 Human Resources Recruitment The careful selection and vetting of all staff employed by Monthind is of the utmost importance to safeguard client confidentiality and the security of premises. An employee questionnaire is completed with steps being taken to ensure that the prospective candidate is permitted to work in this country (this is backed by sight of the permit, birth certificate, passport and National Insurance number). Their National Insurance number is required before commencement of employment. Payment of all wages is made direct into a named bank account, a further affirmation of the employee s bona fide status. Monthind will also carry out CRB checks on behalf of the client as required. References References are taken up on all employees. Copies of references may be sent to clients if requested. Attendance All contracts have time sheets for recording start and finish times. Each member of staff must sign in and out. These are then returned to the office, checked and signed. Customers may have access to these records at any time. Staff Identification All employees are required to wear Monthind s uniform (either a tabard or a polo shirt) and display their identity badge when working. Site Supervisors wear white polo shirts to identify them as supervisors. Identity badges are provided to comply with client/site requirements. Contract Managers are responsible for monitoring processes on a daily basis, by regular visits to ensure that staff are fully competent to perform the tasks required. This competency can be assessed by the length of time performing the various activities. The Contract Managers complete inspection reports for each site on a regular basis. The Management Representative carries out Internal Audits of the systems and contracts and is independent of all processes and functions and is fully trained in auditing procedures General Contract Managers shall ensure that all staff employed by the company are competent on the basis of appropriate education, training, skills and experience Competence, awareness and training Issue 18 12

13 Monthind LLP regards its staff as its most valuable asset and regards their training as an essential requirement for the effective performance of Monthind's service. All staff are fully trained to ensure that they are competent to perform the duties required and to carry out the cleaning operations they are scheduled to perform. This training is based on the cleaning techniques documented in QP4 and QP5. Training is carried out either in house or by external training organisations appointed for the most appropriate service. The introduction of the Monthind Maximiser Scheme highlights the competency of staff for performing activities that affect quality, and the effectiveness of their actions has been evaluated. They are fully aware of how their activities affect the overall performance of the company. Details of all training received by employees is recorded on Training Records held in their personnel file. Induction training to all new personnel will include guidelines on Health and Safety, COSHH, Risk Assessment, use of equipment, use of protective clothing and ISO 9001 this is recorded on their induction training forms and kept in their personal file, an electronic database of all training is also kept on K drive under Business Compliance. 6.3 Infrastructure Monthind LLP consists of a Head Office which is based in a purpose built office in Copford, Colchester which supports the southern areas of our operational business and an office in Horsham St Faith, Norwich which supports the northern areas of our operational business. We have premises insurance and Employers/Public Liability insurance of 10/ 10 million. Client site green folders contain Method Statements, Risk Assessments, full CoSHH Assessments and Material Data Sheets, H&S policy, H&S Handbook, insurance details and certificates. 6.4 Work Environment All cleaning operations are performed at client s sites, adhering to all local arrangements for health and safety, fire, first aid etc. All cleaning operations to be performed under each contract are agreed between the customer and Monthind and are documented as detailed in QP11. They are divided into Daily, Weekly and Periodic tasks. The manners in which they are controlled and the inspection methods used to maintain standards are described in QP4. 7, PRODUCT REALISATION 7.1 Planning of Product Realisation 7.2 Customer Related Processes All cleaning operations to be performed under each contract are agreed between the Customer and Monthind LLP and are documented in QP11. They are divided into Daily, Weekly and Periodic tasks. The manners in which they are Issue 18 13

14 controlled and the inspection methods used to maintain standards are described in QP4. Business Managers and Contract Managers perform regular visits to customers, to ensure that the company s objectives are achieved. Monthind does not carry out any post delivery inspections other than inspections for special one off cleaning operations, e.g. for builders clean prior to hand over to their customer. These will be carried out by Monthind Representative and the Customer. The Company has special procedures for the cleaning of "Clean Rooms" and these are detailed in QP5, but are individually tailored to match the customers' specification. Documented procedures are held for activities, which are sub-contracted. These will be continually amended to accommodate changes in customer s requirements. These will detail the planning, and where appropriate, maintenance of equipment to ensure continuing process capability. In other special areas e.g. food preparation, all cleaning materials are colour coded (see QP4) and stored in a separate cleaners cupboard. Records of all inspections, completed in accordance with QP11, are filed and analysed for the Management Meetings Customer Communication Business Managers, Contract Managers and Contract Support Managers are in regular contact with customers advising them of changes to contracts, chemicals, and services provided by Monthind. A Communications Book is held on site as a means of two-way communication for notes to be left by either the cleaning operatives or customers. The Communications Book is checked daily at the start of the cleaning period. 7.3 Designs and/or Development This clause of the standard is not applicable to Monthind and therefore not covered. 7.4 Purchasing Purchasing Control It is the policy of the Company to buy only branded materials specifically developed for the commercial cleaning market. The Company uses regular suppliers who are able to provide a cost effective, high quality service. Purchase orders raised for branded goods will have specific descriptions for the goods. Purchase orders for equipment are raised in a similar way as branded durables. Details of Suppliers are recorded on the Approved Suppliers List, see QP Purchasing Information Issue 18 14

15 Within the range of services that the Company provides, visual verification is a daily on going activity by the purchaser. Documentation of complaints normally takes the form of entries in a Communications Book and these are reviewed as part of corrective action systems, QP2. One-off cleaning operations are usually contained within the contract, a verification requirement that is met on a contract-by-contract basis. The Company does not regard this verification activity as evidence of effective control as previously stated by the Company's Quality System. (Contract Review Documentation) The purchase order will be noted, if Monthind wishes to inspect either goods purchased from a supplier or at the point of release in the case of sub-contracted services. Any product, which is found to be unsuitable for use, is placed in the quarantine area until it is returned to the supplier Verification of Purchased Product Services, which are required by contract but fall outside the scope of the Company s activities, will be sub-contracted. Sub-contractors chosen by Monthind LLP will be assessed to ensure that they can meet all sub-contract requirements, including quality. Prior to acceptance of sub-contractors, evidence of relevant training and satisfactory ability to perform the services required will be obtained. Evidence of satisfactory services will be retained after each visit - any customer complaints made direct to the sub-contractor will be forwarded to Monthind, and discussed at Management Meetings. Monthind is involved with the introduction of Facilities Management services. This area is tailored to the Company s needs and requirements. Procedures QP12 is held detailing the activities at present covered but will be adapted in the course of time with the expansion as necessary. 7.5 Product & Service Provision Product & service provision control Contract files held on every site contain details of procedures (work instructions), staff handbooks covering personnel issues, and the cleaning specification - these documents all ensure that advice for delivery of service is available to all staff Special Processes At present this section is not covered by the company, but if arose would be in controlled conditions in accordance with the standard Identification and Traceability Traceability of all paperwork for both contracts and employees. Issue 18 15

16 Issue QM Customer Property Monthind LLP takes great care to ensure that the equipment and premises of its customers are maintained in good order. If any area for concern is found by any member of Monthind staff in relation to the customer s equipment or premises, whether as a result of action by Monthind staff or others, it will be reported to the office at the earliest possible opportunity. The Customer will then be informed and the correct procedures followed Preservation of Product Service providers do not have a physical product, which can be handled, stored, and delivered in the commonly accepted sense. This section of the standard is interpreted for Monthind LLP as follows: Products and Equipment used to perform the service provided by the Company are handled as per instructions and guidelines provided by the manufacturers. All buildings and contents belonging to customers are handled with due care and attention to preserve their condition. When not in use, all materials are stored in areas designated for the purpose, by the customer. Due notice is taken of any "use by" dates indicated by the manufacturer. These areas and products are inspected regularly. All cleaning chemicals are kept in their original packaging until used. Chemicals dispensed into spray bottles will contain the dilution for more than one usage. The bottle is clearly marked with the product name and its correct use. When a chemical has to be poured into a bucket (e.g. for dilution), only sufficient for immediate use will be poured out. Where required, appropriate methods will be introduced to ensure the segregation of products under Monthind s control. Great care is taken with all products and methods used by the Company at the customer s premises. Aspects of security for entering and leaving buildings after cleaning are determined by agreement with the customer and Monthind. Details of such are held at the Company Head Office, in the Contract file. Where cleaning operatives are the last people to leave a building, the supervisor is responsible for securing the building. Sites are secured after cleaning by a nominated key holder. The Contract Managers hold names of all key holders. A note is made in the Communications Book, or by some other means defined in the contract, and the Supervisor informs the Company Head Office immediately, when rooms or buildings cannot be secured due to circumstances dictated by the customer. 7.6 Control of Monitoring and Measuring Devices Monthind use suitable Portable Appliance Testing (PAT) equipment to ensure all pieces of portable electrical equipment are safe and valid to be used. The PAT tester is calibrated on a yearly basis by a registered UKAS (United Kingdom Accreditation Service) company. If in the course of calibration, previous tests may be in doubt, all machines affected will be retested. Details of the calibration are kept at the Office. All PAT test information is stored electronically on the computer system at head office this information forms the basis of the equipment register.

17 8 MEASUREMENT, ANALYSIS and IMPROVEMENT 8.1 General All machinery purchased by the Company is checked prior to use and marked as being tested. 8.2 Measurement and Monitoring Records are retained of all monthly and periodic inspection visits to all contracts. Records raised to assist in planning of Facilities Management are also retained. All goods are subject to visual inspection on receipt for damage and for conformity to purchase orders. The test status of all equipment used for performing cleaning tasks is clearly indicated on the appliances Customer Satisfaction On site Contract Supervisors check visually during the cleaning period, to ensure all work performed is according to the specification. All cleaning staff involved on each contract will ensure that the requirements of the specification are met each day. Any non-conformances are dealt with in accordance with QP2. Action to correct non-conformance to the QMS is described in QP2. Monthind pays great care and attention to changes, to ensure that all complaints, comments and observations are discussed for any possible affect on its working practices. Monthind continually reviews all actions to prevent, wherever possible, any re-occurrence of a complaint. These are discussed at monthly Management Meetings and changes where appropriate to the system are made. Clients are contacted on a regular basis to assess customer satisfaction. Further details can be found in QP Internal Audit Internal Audits of the QMS are planned to ensure that the requirements of the Company and standard are met. Findings of previous audits are taken into account when audits are scheduled. Audit reports are scheduled, recorded and analysed by procedures defined in QP9 and are reviewed in Management Meetings, and in the Compliance Manager s Reports Monitoring & Measurement of Processes On site communication books, regular inspection of cleaning standards, regular customer visits, audits and customer surveys all provide opportunities for monitoring the service delivered by Monthind. Copies of these are held on relevant files Monitoring and Measurement of Products If concession approval by the local authority is required then Monthind will develop a process for dealing with this situation. 8.3 Control of Non Conformity Issue 18 17

18 Non-conformances may arise and be reported by one of the Company's systems (e.g. Communications Book, Site Inspections, Internal Quality Audits, or Customer Complaints). Any non-conformance is reported to the person responsible for the area to ensure corrective action is taken. 8.4 Analysis of Data Customer complaints and responses are analysed for customer satisfaction, for failure in providing acceptable level of performance and for any trends. 8.5 Improvement Continual Improvement Continual improvement of the QMS is achieved through maintenance of Quality Policy. Management Meetings, Board Meetings and audits of the system are carried out on a regular basis ensuring continual improvement is monitored Corrective Action Audits, Operational Reports, Management Meetings and Board Meetings are all sources for raising potential non-conformances. Corrective action is agreed and then monitored to address any non-conformances Preventive Action Results from all possible non-conformances are analysed for preventive purposes throughout the company and any actions arising are discussed at Management Meetings. Agreed actions are then implemented throughout the company to prevent any non-conformance re-occurring across the company. 9 Business Continuity 9.1 Business Continuity Plan A business Continuity Plan QP16 has been developed to ensure that the Company suffers the minimal amount of disruption should a disaster occur at one of our offices. E N D O F D O C U M E N T Issue 18 18

19 Appendix 2: LIST OF COMPANY PROCEDURES QP1 QP2 QP3 QP4 QP5 QP6 QP7 QP8 QP9 CONTROL AND CHANGE OF QUALITY SYSTEM DOCUMENTS CORRECTIVE AND PREVENTIVE ACTION REGISTER, PAT TESTING AND REPAIR OF ELECTRICAL EQUIPMENT CLEANING PROCEDURES CLEAN ROOM CLEANING SALES PROCEDURES PURCHASING AND STOCK PROCEDURES TRAINING PROCEDURES INTERNAL QUALITY AUDITS Issue 18 19

20 QP10 HEALTH AND SAFETY POLICY DOCUMENT QP11 CONTRACT REVIEW AND PROCESSING QP12 FACILITIES MANAGEMENT SERVICES QP13 RISK ASSESSMENT QP14 ENVIRONMENTAL POLICY QP15 WINDOW CLEANING/METHOD STATEMENT QP16 BUSINESS CONTINUITY PLAN Issue 18 20

BLOOM AND WAKE (ELECTRICAL CONTRACTORS) LIMITED QUALITY ASSURANCE MANUAL

BLOOM AND WAKE (ELECTRICAL CONTRACTORS) LIMITED QUALITY ASSURANCE MANUAL 130 Wisbech Road Outwell Wisbech Cambridgeshire PE14 8PF Tel: (01945) 772578 Fax: (01945) 773135 Copyright 2003. This Manual and the information contained herein are the property Bloom & Wake (Electrical

More information

ISO 9001:2000 Gap Analysis Checklist

ISO 9001:2000 Gap Analysis Checklist ISO 9001:2000 Gap Analysis Checklist Type: Assessor: ISO 9001 REQUIREMENTS STATUS ACTION/COMMENTS 4 Quality Management System 4.1 General Requirements Processes needed for the quality management system

More information

ISO 9001:2000 AUDIT CHECKLIST

ISO 9001:2000 AUDIT CHECKLIST ISO 9001:2000 AUDIT CHECKLIST No. Question Proc. Ref. Comments 4 Quality Management System 4.1 General Requirements 1 Has the organization established, documented, implemented and maintained a quality

More information

DNV GL Assessment Checklist ISO 9001:2015

DNV GL Assessment Checklist ISO 9001:2015 DNV GL Assessment Checklist ISO 9001:2015 Rev 0 - December 2015 4 Context of the Organization No. Question Proc. Ref. Comments 4.1 Understanding the Organization and its context 1 Has the organization

More information

Quality Management System

Quality Management System LH Sleightholme Ltd, Westfield Works, Helperthorpe, Malton, North Yorkshire YO17 8TQ Quality Management System MANUAL ISO 9001:2008 This Quality Management System Manual has been issued on the authority

More information

UNCONTROLLED COPY FOR REFERENCE ONLY

UNCONTROLLED COPY FOR REFERENCE ONLY CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President

More information

Company Quality Manual Document No. QM Rev 0. 0 John Rickey Initial Release. Controlled Copy Stamp. authorized signature

Company Quality Manual Document No. QM Rev 0. 0 John Rickey Initial Release. Controlled Copy Stamp. authorized signature Far West Technology, Inc. ISO 9001 Quality Manual Document No.: QM Revision: 0 Issue Date: 27 August 1997 Approval Signatures President/CEO Executive Vice President Vice President/CFO Change Record Rev

More information

CCD MARINE LTD QUALITY MANUAL PROCEDURE Q0.000. Date: Title. Revision: QUALITY MANUAL PROCEDURE Q0.000. 29 September 2014

CCD MARINE LTD QUALITY MANUAL PROCEDURE Q0.000. Date: Title. Revision: QUALITY MANUAL PROCEDURE Q0.000. 29 September 2014 Title: Quality Manual Uncontrolled if Hardcopy CCD MARINE LTD th Date: 29 September 2014 Doc Ref: Q0.000 Issued By: Sarah Leighton Rev No: 2 Title Revision: Date: QUALITY MANUAL PROCEDURE Q0.000 2 29 September

More information

QUALITY MANAGEMENT POLICY & PROCEDURES

QUALITY MANAGEMENT POLICY & PROCEDURES QUALITY MANAGEMENT POLICY & PROCEDURES Policy Statement Cotleigh Engineering Co. Limited specialises in the recruitment of engineering & technical personnel in the oil & energy, rail, civil engineering,

More information

Surgi Manufacturing Quality Manual

Surgi Manufacturing Quality Manual Surgi Manufacturing Page 1 of 18 Approvals: QA: Eng. Mgt. : A Date: 18Aug98 1. Introduction... 4 1.1 Scope... 4 1.2 Purpose... 4 1.3 Authority... 4 1.4 Issue of the Manual... 4 1.5 Amendments... 4 1.6

More information

ISO-9001:2000 Quality Management Systems

ISO-9001:2000 Quality Management Systems ISO-9001:2000 Quality Management Systems REQUIREMENTS 10/10/2003 ISO-9001:2000 Requirements 1 Process Based Approach C U S MANAGEMENT RESPONSIBILITY RESOURCE MANAGEMENT C U S T O M Requirements PRODUCT

More information

ISO 9001:2008 Quality Management System Requirements (Third Revision)

ISO 9001:2008 Quality Management System Requirements (Third Revision) ISO 9001:2008 Quality Management System Requirements (Third Revision) Contents Page 1 Scope 1 1.1 General. 1 1.2 Application.. 1 2 Normative references.. 1 3 Terms and definitions. 1 4 Quality management

More information

a) To achieve an effective Quality Assurance System complying with International Standard ISO9001 (Quality Systems).

a) To achieve an effective Quality Assurance System complying with International Standard ISO9001 (Quality Systems). FAT MEDIA QUALITY ASSURANCE STATEMENT NOTE 1: This is a CONTROLLED Document as are all quality system files on this server. Any documents appearing in paper form are not controlled and should be checked

More information

ISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR

ISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR Page 1 of 20 ISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR SUPPLIER/ SUBCONTRACTOR NAME: ADDRESS: CITY AND STATE: ZIP CODE: SUPPLIER/MANUFACTURER NO PHONE: DIVISION:

More information

Quality Manual. UK Wide Security Solutions Ltd. 1 QM-001 Quality Manual Issue 1. January 1, 2011

Quality Manual. UK Wide Security Solutions Ltd. 1 QM-001 Quality Manual Issue 1. January 1, 2011 Quality Manual 1 QM-001 Quality Manual Issue 1 January 1, 2011 This document is uncontrolled when printed. Please verify with Quality Management Representative 16 Dukes Close, West Way, Walworth Industrial

More information

Row Manufacturing Inc. Quality Manual ISO 9001:2008

Row Manufacturing Inc. Quality Manual ISO 9001:2008 Row Manufacturing Inc. Quality Manual ISO 9001:2008 Row Manufacturing 210 Durham Drive Athens, Alabama 35611 Phone:256.232.4151 Fax:256.232.4133 Page 2 of 33 This Page intentionally left Blank Page 3 of

More information

PUBLICATIONS. Introduction

PUBLICATIONS. Introduction Page: 1 of 10 Introduction 1. The requirements of this document supplement the Factory Production Control requirements given in Table 1 of PN111 by giving the specific requirements for Factory Production

More information

Quality Management System Manual

Quality Management System Manual Effective Date: 03/08/2011 Page: 1 of 17 Quality Management System Manual Thomas C. West Eric Weagle Stephen Oliver President ISO Management General Manager Representative Effective Date: 03/08/2011 Page:

More information

MP Plumbing & Heating Ltd Quality Policy Manual THE QUALITY POLICY STATEMENT OF:

MP Plumbing & Heating Ltd Quality Policy Manual THE QUALITY POLICY STATEMENT OF: THE QUALITY POLICY STATEMENT OF: MP Plumbing & Heating Ltd Unit 8,The Metro Centre, Bridge Road, Orpington BR5 2BE Telephone: 01689 822188 Fax: 01689 897 733 E-Mail: info@mpplumbingheating.co.uk Web page:

More information

ISO/IEC 17025 QUALITY MANUAL

ISO/IEC 17025 QUALITY MANUAL 1800 NW 169 th Pl, Beaverton, OR 97006 Revision F Date: 9/18/06 PAGE 1 OF 18 TABLE OF CONTENTS Quality Manual Section Applicable ISO/IEC 17025:2005 clause(s) Page Quality Policy 4.2.2 3 Introduction 4

More information

Control No: QQM-02 Title: Quality Management Systems Manual Revision 10 07/08/2010 ISO 9001:2008 Page: 1 of 22

Control No: QQM-02 Title: Quality Management Systems Manual Revision 10 07/08/2010 ISO 9001:2008 Page: 1 of 22 ISO 9001:2008 Page: 1 of 22 Central Technologies has developed a Quality Management System, and the associated procedures and work instructions, to be compliant to ISO 9001:2008. Utilizing this Quality

More information

The President of Inductors Inc. is the senior executive responsible for operations.

The President of Inductors Inc. is the senior executive responsible for operations. Title: Quality Management System Manual Page: 1 of 20 INTRODUCTION Inductors Inc., founded in 1991, specializes in the distribution of inductive components, including but not limited to standard and custom

More information

AUDITOR GUIDELINES. Responsibilities Supporting Inputs. Receive AAA, Sign and return to IMS with audit report. Document Review required?

AUDITOR GUIDELINES. Responsibilities Supporting Inputs. Receive AAA, Sign and return to IMS with audit report. Document Review required? 1 Overview of Audit Process The flow chart below shows the overall process for auditors carrying out audits for IMS International. Stages within this process are detailed further in this document. Scheme

More information

Internal Quality Management System Audit Checklist (ISO9001:2015) Q# ISO 9001:2015 Clause Audit Question Audit Evidence 4 Context of the Organization

Internal Quality Management System Audit Checklist (ISO9001:2015) Q# ISO 9001:2015 Clause Audit Question Audit Evidence 4 Context of the Organization Internal Quality Management System Audit Checklist (ISO9001:2015) Q# ISO 9001:2015 Clause Audit Question Audit Evidence 4 Context of the Organization 4.1 Understanding the organization and its context

More information

CENTRIS CONSULTING. Quality Control Manual

CENTRIS CONSULTING. Quality Control Manual CENTRIS CONSULTING Quality Control Manual ISO 9001:2008 Introduction Centris Consulting developed and implemented a Quality Management System in order to document the company s best business practices,

More information

The Prophotonix (UK) Ltd Quality manual

The Prophotonix (UK) Ltd Quality manual The Prophotonix (UK) Ltd Quality manual Date: March 2014 Revision: D Sparrow lane, Hatfield Broad Oak, Herts, UK, CM22 7BA Tel: +44 (0)1279 717170 Fax: +44 (0)1279 717171 e-mail: info@prophotonix.com Page

More information

ISO 9001:2015 Internal Audit Checklist

ISO 9001:2015 Internal Audit Checklist Page 1 of 14 Client: Date: Client ID: Auditor Audit Report Key - SAT: Satisfactory; OBS: Observation; NC: Nonconformance; N/A: Not Applicable at this time Clause Requirement Comply Auditor Notes / Evidence

More information

Quality & Safety Manual

Quality & Safety Manual Purpose: This Quality & Safety Manual is intended to clarify and document the Quality and Health & Safety policies of GGS Oil and Gas Systems and to describe how the organization organizes its activities

More information

Supplier Quality Assurance

Supplier Quality Assurance Supplier Quality Assurance Preface We strive to continually improve our process performance by meeting quality objectives. It is imperative that our suppliers operate under the zero defects and 100% on

More information

The post holder will be guided by general polices and regulations, but will need to establish the way in which these should be interpreted.

The post holder will be guided by general polices and regulations, but will need to establish the way in which these should be interpreted. JOB DESCRIPTION Job Title: Membership and Events Manager Band: 7 Hours: 37.5 Location: Elms, Tatchbury Mount Accountable to: Head of Strategic Relationship Management 1. MAIN PURPOSE OF JOB The post holder

More information

Generic CMMS Quality Assurance Plan

Generic CMMS Quality Assurance Plan Generic CMMS Quality Assurance Plan Scope In accordance with the Quality Policy, the Quality System of CMMS is based upon the requirements and structure of ISO (the International Organization for Standardization)

More information

QUALITY MANAGEMENT PLAN

QUALITY MANAGEMENT PLAN QUALITY MANAGEMENT PLAN Project Name EfW CHP Facility, North Yard, Devonport Project Number: C1005 Location: North Yard, Devonport Dockyard, Plymouth Approved by: Dated: Signed: KIER Project Manager Reviewed

More information

ISO 9001 : 2008 QUALITY MANAGEMENT SYSTEM AUDIT CHECK LIST INTRODUCTION

ISO 9001 : 2008 QUALITY MANAGEMENT SYSTEM AUDIT CHECK LIST INTRODUCTION INTRODUCTION What auditors should look for: the items listed in these headings that the ISO requirement is met that the requirement is met in the manner described in the organization's documentation Page

More information

POLICY MANUAL BS EN ISO 9001:2008

POLICY MANUAL BS EN ISO 9001:2008 ALERTSYSTEMS LTD SECTIONS ONE, TWO & THREE ISSUE, INTRODUCTION, STRATEGY & POLICY PAGE: Page 2 of 31 1. THIS COPY IS CONTROLLED/UNCONTROLLED* (DELETE AS APPROPRIATE) COPY NUMBER.QUALITY DEPT ISSUE NUMBER...

More information

G & R Labs. Quality Assurance Manual. G&R Labs. 2996 Scott Boulevard Santa Clara CA 95054. Light Meters and Calibration

G & R Labs. Quality Assurance Manual. G&R Labs. 2996 Scott Boulevard Santa Clara CA 95054. Light Meters and Calibration G & R Labs Light Meters and Calibration Quality Assurance Manual G&R Labs 2996 Scott Boulevard Santa Clara CA 95054 QM01 QUALITY MANUAL ISO9001:2008 Manual Contents QM 01 Manual Contents 2 QM 02 Copy Holder

More information

Quality Manual. 14910 SE Morning Way Suite 102 Clackamas OR 97015

Quality Manual. 14910 SE Morning Way Suite 102 Clackamas OR 97015 Quality Manual 14910 SE Morning Way Suite 102 Clackamas OR 97015 Effective Date: 10/27/08 Schedule QM 01 Revision: 1 Page 1 of 1 This document has been approved for use by... (ISO Representative) at Revision

More information

QUALITY MANAGEMENT SYSTEM REQUIREMENTS General Requirements. Documentation Requirements. General. Quality Manual. Control of Documents

QUALITY MANAGEMENT SYSTEM REQUIREMENTS General Requirements. Documentation Requirements. General. Quality Manual. Control of Documents Chapter j 38 Self Assessment 729 QUALITY MANAGEMENT SYSTEM REQUIREMENTS General Requirements 1. Establishing and implementing a documented quality management system 2. Implementing a documented quality

More information

Micro Plastics, Inc. Quality Manual

Micro Plastics, Inc. Quality Manual ISO 9001:2008 11 Industry Lane Flippin, Arkansas 72634 QM-001-2008-F Page 2 of 39 Introduction Micro Plastics, Inc. developed and implemented a Quality Management System in order to document the company

More information

Rev: Issue 4 Rev 4 Quality Manual AOP0101 Date: 10/07/13. Quality Manual. CBT Technology, Inc. 358 North Street Randolph, MA 02368

Rev: Issue 4 Rev 4 Quality Manual AOP0101 Date: 10/07/13. Quality Manual. CBT Technology, Inc. 358 North Street Randolph, MA 02368 Quality Manual CBT Technology, Inc. 358 North Street Randolph, MA 02368 Issue 4 Revision 4 Note: updates are in italics Page 1 of 18 1.0 Scope and Exclusions Scope This Quality Manual contains policies

More information

WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES

WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES WHS UNIT WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES Contents 1 Purpose... 1 2 Scope... 1 3 Definitions... 1 4 Responsibilities... 1 4.1 WHS Unit... 1 4.2 Auditor(s)... 1 4.3 Managers of Faculties

More information

ED FAGAN INC. QUALITY SYSTEM MANUAL

ED FAGAN INC. QUALITY SYSTEM MANUAL ED FAGAN INC. QUALITY SYSTEM MANUAL APPROVED BY: Ed Fagan President ED FAGAN INC. January 13, 2010 TABLE OF CONTENTS 1. PURPOSE AND SCOPE 2 2. PRODUCTS, SERVICES AND CAPABILITIES 2 3. REVISION HISTORY

More information

Example of a food company quality

Example of a food company quality Appendix A manual Example of a food company quality Contents Date: 13/03/95 RME-QLMN-OO Page 1 of 3 Section Title ISO 9001 reference 01 In trod uction 02 Purpose 03 Scope 04 Definitions 05 Management responsibility

More information

Forth Engineering (Cumbria) Limited QUALITY MANUAL. Quality Manual Issue 4 Updated April 2012. Authorised by: Managing Director.

Forth Engineering (Cumbria) Limited QUALITY MANUAL. Quality Manual Issue 4 Updated April 2012. Authorised by: Managing Director. Quality Manual Issue 4 Forth Engineering (Cumbria) Limited QUALITY MANUAL Copy Number: 1 The information contained in this Manual is the property of Forth Engineering (Cumbria) Limited and must not be

More information

CORPORATE QUALITY MANUAL

CORPORATE QUALITY MANUAL Corporate Quality Manual Preface The following Corporate Quality Manual is written within the framework of ISO 9001:2008 Quality System by the employees of CyberOptics. CyberOptics recognizes the importance

More information

DOCUMENT CS/1: SCHEME DESCRIPTION AND BENEFITS

DOCUMENT CS/1: SCHEME DESCRIPTION AND BENEFITS WELDING FABRICATOR CERTIFICATION SCHEME DOCUMENT CS/1: SCHEME DESCRIPTION AND BENEFITS 6 th Edition July 2012 Issued under the authority of the Governing Board for Certification All correspondence should

More information

Wharton Construction Ltd. Quality Manual. Kellaw Road Yarm Road Business Park Darlington DL1 4YA

Wharton Construction Ltd. Quality Manual. Kellaw Road Yarm Road Business Park Darlington DL1 4YA Quality Manual Kellaw Road Yarm Road Business Park Darlington DL1 4YA MANUAL IDENTIFICATION This document is a controlled/uncontrolled copy. Copy Number:...of... Issued to... Title... Holders of controlled

More information

ISO 9001 Quality Systems Manual

ISO 9001 Quality Systems Manual ISO 9001 Quality Systems Manual Revision: D Issue Date: March 10, 2004 Introduction Micro Memory Bank, Inc. developed and implemented a Quality Management System in order to document the company s best

More information

Eagle Machining, Inc. Quality Management System

Eagle Machining, Inc. Quality Management System Eagle Machining, Inc. Quality Management System 1 of 10310 Antoine Drive Bldg D, Houston, Texas 77086 BUSINESS OPERATING MANUAL (QUALITY MANUAL) Revision Date: 08/01/2014 Approved By: Joseph Vu Date: 08/01/2014

More information

ISO 9001:2008 STANDARD OPERATING PROCEDURES MANUAL

ISO 9001:2008 STANDARD OPERATING PROCEDURES MANUAL 8200 Brownleigh Drive Raleigh, NC 27617-7423 Phone: (919) 510-9696 Fax: (919) 510-9668 ISO 9001:2008 STANDARD OPERATING PROCEDURES MANUAL ALLIANCE OF PROFESSIONALS & CONSULTANTS, INC. - 1 - Table of Contents

More information

QUALITY MANUAL ISO 9001:2015

QUALITY MANUAL ISO 9001:2015 Page 1 of 22 QUALITY MANUAL ISO 9001:2015 Quality Management System Page 1 of 22 Page 2 of 22 Sean Duclos Owner Revision History Date Change Notice Change Description 11/02/2015 1001 Original Release to

More information

This Business Management System Manual is based on ISO 9001:2008 requirements

This Business Management System Manual is based on ISO 9001:2008 requirements Page 1 of 19 (Formerly: Quality Management System Manual) When the ISO 9001:2008 standard is identifying the Quality Manual or Quality Management System, Turbonetics is representing this requirement with

More information

Quality Management System Manual ISO9001:2008

Quality Management System Manual ISO9001:2008 Quality Management System Manual ISO9001:2008 Controlled Copy Rev. 3 Page 1 of 21 7/1/13 Table of Contents Company Profile...5 Past...5 Present...5 Mission...5 Vision...5 Locations...6 1 Scope...6 1.1

More information

ISO 9001:2008 Audit Checklist

ISO 9001:2008 Audit Checklist g GE Power & Water ISO 9001:2008 Audit Checklist Organization Auditor Date Page 1 Std. 4.1 General s a. Are processes identified b. Sequence & interaction of processes determined? c. Criteria for operation

More information

Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL

Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL Karas Engineering AS9100 QUALITY MANAGEMENT SYSTEM MANUAL Revision D October 27, 2015 Statement of Commitment and Authority Commitment This Quality Management System Manual (QMSM) delineates the processes,

More information

Supplier Quality Management System Audit Checklist (ISO 9000:2000, TS 16949:2002)

Supplier Quality Management System Audit Checklist (ISO 9000:2000, TS 16949:2002) Supplier Quality Management System Audit Checklist (ISO 9000:2000, TS 16949:2002) Supplier: Plant/Location: Date: Audit Team: Scope of Audit: Number of C.A.R. s: Corrective Action Due: Potential suppliers

More information

OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)

OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained

More information

DOCUMENTED PROCEDURE MANUAL

DOCUMENTED PROCEDURE MANUAL NAPIT REGISTERED INSTALLERS DOCUMENTED PROCEDURE MANUAL CONTENTS 1. INTRODUCTION 2. DEFINITIONS 3. RESPONSIBILITY FOR QUALITY 4. DOCUMENT AND DATA CONTROL 5. CUSTOMER ENQUIRIES AND QUOTATIONS 6. CONTRACTS

More information

FINE LOGISTICS. Quality Manual. Document No.: 20008. Revision: A

FINE LOGISTICS. Quality Manual. Document No.: 20008. Revision: A FINE LOGISTICS Quality Manual Document No.: 20008 Revision: A 20008 Rev. A FINE LOGISTICS, Quality Manual Page 1 of 24 Quality Manual: Table of contents Number Section Page 1. GENERAL 3 1.1 Index and revision

More information

AS9100 Quality Manual

AS9100 Quality Manual Origination Date: August 14, 2009 Document Identifier: Quality Manual Revision Date: 8/5/2015 Revision Level: Q AS 9100 UNCONTROLLED IF PRINTED Page 1 of 17 1 Scope Advanced Companies (Advanced) has established

More information

Phoenix Security (Essex) Ltd.

Phoenix Security (Essex) Ltd. DESCRIPTION PROCEDURES INDEX. APPENDICES INDEX. CIRCULATION LIST OP 101 CONTRACT REVIEW. OP 102 PURCHASING. OP 103 RECORDS OP 104 DOCUMENT CONTROL. OP 105 APPROVED SUPPLIERS. OP 106 GOODS IN INSPECTION.

More information

Uncontrolled Document

Uncontrolled Document SOUTHWEST RESEARCH INSTITUTE QUALITY SYSTEM MANUAL July 2015 Revision 5 Quality System Manual Page iii TABLE OF CONTENTS 1.0 PURPOSE... 1 2.0 SCOPE... 1 3.0 TERMS AND DEFINITIONS... 2 4.0 QUALITY MANAGEMENT

More information

Quality Manual Printed copy valid for 24 hours from time of printing unless stamped CONTROLLED COPY in red. Page

Quality Manual Printed copy valid for 24 hours from time of printing unless stamped CONTROLLED COPY in red. Page Quality Manual Page 1 of 20 Change Log Document Revision Date Description of Change 15/04/09 Initial Release Page 2 of 20 1.0 Scope and Exclusions Scope This Quality Manual contains policies that have

More information

ENVIRONMENTAL POLICY & MANAGEMENT SYSTEM GUIDE

ENVIRONMENTAL POLICY & MANAGEMENT SYSTEM GUIDE ENVIRONMENTAL POLICY & MANAGEMENT SYSTEM GUIDE 1 Statement of Intent Corps Security aims to create and maintain through staff awareness, the highest level of environmental responsibility. We regard the

More information

D. MCLAUGHLIN & SONS LTD QUALITY MANUAL

D. MCLAUGHLIN & SONS LTD QUALITY MANUAL D. MCLAUGHLIN & SONS LTD QUALITY MANUAL Originated By: Anne Wall (Quality Consultant) Date: Approved By: Date: Issue AMENDMENT DATE Draft 1 Quality Manual QM1 CONTENTS 1 QUALITY ASSURANCE POLICY 1.1 Quality

More information

NORTH AMERICA OPERATIONS. (Fairmont and Montreal Facilities) QUALITY MANUAL. Prepared to comply with the requirements of ISO 9001:2008

NORTH AMERICA OPERATIONS. (Fairmont and Montreal Facilities) QUALITY MANUAL. Prepared to comply with the requirements of ISO 9001:2008 WEIGH-TRONIX CANADA ULC NORTH AMERICA OPERATIONS (Fairmont and Montreal Facilities) QUALITY MANUAL Prepared to comply with the requirements of ISO 9001:2008 Meets or exceeds the requirements for design,

More information

Checklist. Standard for Medical Laboratory

Checklist. Standard for Medical Laboratory Checklist Standard for Medical Laboratory Name of hospital..name of Laboratory..... Name. Position / Title...... DD/MM/YY.Revision... 1. Organization and Management 1. Laboratory shall have the organizational

More information

QUALITY OPERATING PROCEDURE QOP-00-02 QUALITY ASSURANCE SYSTEM MANUAL

QUALITY OPERATING PROCEDURE QOP-00-02 QUALITY ASSURANCE SYSTEM MANUAL PAGE 1 OF 40 QUALITY Note: The revision level of this document and any referenced documents must be verified for latest issue before use QOP-00-02 TITLE QUALITY ASSURANCE SYSTEM MANUAL APPROVALS DATE REVISIONS

More information

QUALITY MANUAL ISO 9001. Quality Management System

QUALITY MANUAL ISO 9001. Quality Management System Page 1 of 20 QUALITY MANUAL ISO 9001 Quality Management System Printed copies are not controlled unless marked "CONTROLLED". Upon receipt of this document, discard all previous copies. Page 2 of 20 Approval

More information

Quality Systems Manual

Quality Systems Manual Quality Systems Manual This manual was developed to support ISO 9001 elements Revision Description of Change Author Effective Date 5-28-02 Initial Release Support ISO 9001: 2000 L. Hook 5-28-02 7-01-02

More information

DEC STD 017-2 - ISO 9002 - Quality Systems - Model for Quality Assurance in Production and Installation

DEC STD 017-2 - ISO 9002 - Quality Systems - Model for Quality Assurance in Production and Installation Digital Internal Use Only DEC STD 017-2 - ISO 9002 - Quality Systems - Model for Quality Assurance in Production and Installation DOCUMENT IDENTIFIER: A-DS-EL00017-02-0000 Rev A, ABSTRACT: This standard

More information

14620 Henry Road Houston, Texas 77060 PH: 281-447-3980 FX: 281-447-3988. WEB: www.texasinternational.com QUALITY MANUAL

14620 Henry Road Houston, Texas 77060 PH: 281-447-3980 FX: 281-447-3988. WEB: www.texasinternational.com QUALITY MANUAL 14620 Henry Road Houston, Texas 77060 PH: 281-447-3980 FX: 281-447-3988 WEB: www.texasinternational.com QUALITY MANUAL ISO 9001:2008 API Spec Q1, 9th Edition API Spec 8C 5 Th Edition MANUAL NUMBER: Electronic

More information

BUSINESS MANAGEMENT SYSTEM MANUAL

BUSINESS MANAGEMENT SYSTEM MANUAL BUSINESS MANAGEMENT SYSTEM MANUAL MS-MA-001-10 Page 1-15 Table 1: AMENDMENTS Amendment Number Description of Change Page No Effective Date 09 Full manual revision Full Document October 2012 10 Amendment

More information

Comparison ISO/TS 16949 (1999) to VDA 6.1 (1998)

Comparison ISO/TS 16949 (1999) to VDA 6.1 (1998) 1 APPLICABILITY VDA 6.1: Section: 3.1; 7 new: In addition to the applicability for supplier sites for production, services and their subcontractors for: products and production materials, or services like

More information

QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC.

QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC. QUALITY ASSURANCE MANUAL JPM OF MISSISSIPPI, INC. Hattiesburg, MS Revision E 01/19/11 Revised to ISO 9001:2008 on July 9, 2009 JPM OF MISSISSIPPI, INC. MANAGEMENT QUALITY POLICY It is the goal of JPM of

More information

Quality Assurance Policy And Project Organisation Plan

Quality Assurance Policy And Project Organisation Plan Quality Assurance Policy Quality Assurance Policy And Project Organisation Plan This document defines the general policy for Quality Assurance to be used for the whole project. It gives the project organisation,

More information

ABC COMPANY INC ISO 9001:2000 QUALITY MANUAL

ABC COMPANY INC ISO 9001:2000 QUALITY MANUAL Page 1 of 25 ABC COMPANY INC QUALITY MANUAL Page 2 of 25 DOCUMENT INTRODUCTION PURPOSE OF THIS MANUAL This describes the quality management system at ABC Company Ltd, Buffalo, USA described as the Organization,

More information

ISO 9001:2015 Overview of the Revised International Standard

ISO 9001:2015 Overview of the Revised International Standard ISO 9001:2015 Overview of the Revised International Standard Introduction This document provides: a summary of the new ISO 9001:2015 structure. an overview of the new and revised ISO 9001:2015 requirements

More information

QUALITY MANUAL 3 KENDRICK ROAD WAREHAM, MA 02571 508-295-9591 FAX 508-295-6752

QUALITY MANUAL 3 KENDRICK ROAD WAREHAM, MA 02571 508-295-9591 FAX 508-295-6752 QUALITY MANUAL 3 KENDRICK ROAD WAREHAM, MA 02571 508-295-9591 FAX 508-295-6752 Section 1. REVISION STATUS Revision 01 Initial Issue 02/13/95 Revision 02 ECO No.Q-0032 05/07/96 Revision 03 ECO No.97171

More information

QUALITY MANAGEMENT SYSTEM Corporate

QUALITY MANAGEMENT SYSTEM Corporate Page 1 of 12 4 Quality Management System 4.1 General Requirements The Peerless Pump Quality Management System shall include: Documented statements of a quality policy and of quality objectives; A quality

More information

Quality Management System Manual

Quality Management System Manual Quality Management System Manual This manual has been reviewed and approved for use by: Jack Zazulak President, Aurora Machine Limited March 07, 2011 Date - Copyright Notice - This document is the exclusive

More information

Quality Management System Manual

Quality Management System Manual Quality Management System Manual Assurance ISO / AS Manual Quality Management System EXCEEDING ALL EXPECTATIONS Since our inception in 1965, Swiss-Tech has supplied the medical, aerospace, hydraulic, electronic

More information

QUALITY MANUAL. 90a BROOMFIELD ROAD CHELMSFORD ESSEX CM1 1SS. Version 3 Page 1 of 67 Feb 2013

QUALITY MANUAL. 90a BROOMFIELD ROAD CHELMSFORD ESSEX CM1 1SS. Version 3 Page 1 of 67 Feb 2013 90a BROOMFIELD ROAD CHELMSFORD ESSEX CM1 1SS 01245 261345 Version 3 Page 1 67 Feb 2013 Copyright 2012. This Manual and the information contained herein are the property Gillett Morrissey. It must not be

More information

TRANSPORT FOR LONDON (TfL) LOW EMISSIONS CERTIFICATE (LEC) GUIDANCE NOTES FOR THE COMPANY AUDIT PROCESS. LEC (Company Audit) Guidance Notes

TRANSPORT FOR LONDON (TfL) LOW EMISSIONS CERTIFICATE (LEC) GUIDANCE NOTES FOR THE COMPANY AUDIT PROCESS. LEC (Company Audit) Guidance Notes TRANSPORT FOR LONDON (TfL) LOW EMISSIONS CERTIFICATE (LEC) GUIDANCE NOTES FOR THE COMPANY AUDIT PROCESS LEC (Company Audit) Guidance Notes Glossary of Terms Transport for London (TfL) London Low Emission

More information

ISO 9001:2008 Requirements Explained - An Adobe PDF File for Use on a Network System

ISO 9001:2008 Requirements Explained - An Adobe PDF File for Use on a Network System 1-2 3 4 5 6 9 9 29 37 44 57 64 67 70 77 85 90 93 97 101 110 112 113 122 125 127 135 139 146 150 157 161 165 168 172 175 180 187 190 193 201 206 209 212 216 227 233 235 247 251 258 264 272 274 286 1 of

More information

Specialties Manufacturing. Talladega Castings & Machine Co., Inc. ISO 9001:2008. Quality Manual

Specialties Manufacturing. Talladega Castings & Machine Co., Inc. ISO 9001:2008. Quality Manual Specialties Manufacturing Talladega Castings & Machine Co., Inc. ISO 9001:2008 This document is the property of TMS and may not be reproduced, wholly, or in part, without the express consent of TMS. Rev.

More information

Vigilant Security Services UK Ltd Quality Manual

Vigilant Security Services UK Ltd Quality Manual Quality Manual Date: 11 th March, 2014 Issue: 5 Review Date: 10 th March 2015 VSS-COM-PRO-001 SCOPE This Quality Manual specifies the requirements for the Quality Management System of Vigilant Security

More information

Revision Date Author Description of change. 10 07Jun13 Mark Benton Removed Admin. Manager from approval

Revision Date Author Description of change. 10 07Jun13 Mark Benton Removed Admin. Manager from approval Page 2 of 15 Document Revision History Revision Date Author Description of change 10 07Jun13 Mark Benton Removed Admin. Manager from approval 12Feb13 Mark Benton 08 01Oct12 Mark Benton 07 8/30/2012 Refer

More information

Quality Manual ISO 9001:2015 Quality Management System

Quality Manual ISO 9001:2015 Quality Management System Quality management input comprises the standard requirements from ISO 9001:2015 which are deployed by our organization to achieve customer satisfaction through process control. Quality Manual ISO 9001:2015

More information

FMC Technologies Measurement Solutions Inc.

FMC Technologies Measurement Solutions Inc. Table of Contents 1 Revision History... 4 2 Company... 5 2.1 Introduction... 5 2.2 Quality Policy... 6 2.3 Quality Organization... 6 2.4 Company Processes... 7 3 Scope and Exclusions... 8 3.1 Scope...

More information

Free Download ISO/TS 16949:2009. Requirements Checklist. 29 of 57 pages (PDF) For additional information see www.rcglobal.com

Free Download ISO/TS 16949:2009. Requirements Checklist. 29 of 57 pages (PDF) For additional information see www.rcglobal.com RCGLOBAL.COM Free Download ISO/TS 16949:2009 Requirements Checklist 29 of 57 pages (PDF) For additional information see www.rcglobal.com RCGLOBAL(Canada), for internal use only. Page 1 of 57 Review performed

More information

Quality Management System Policy Manual

Quality Management System Policy Manual Quality Management System Burns Engineering, Inc. 10201 Bren Road East Minnetonka, MN 55343 4. 4.1 General Requirements The Quality Manual consists of the quality system policy documents and the quality

More information

Title: Rio Tinto management system

Title: Rio Tinto management system Standard Rio Tinto management system December 2014 Group Title: Rio Tinto management system Document No: HSEC-B-01 Standard Function: Health, Safety, Environment and Communities (HSEC) No. of pages: 23

More information

Care and Social Services Inspectorate Wales

Care and Social Services Inspectorate Wales Care and Social Services Inspectorate Wales Care Standards Act 2000 Adoption and Children Act 2002 Inspection Report Voluntary Adoption Agencies In Wales St David`s Children Society 28 Park Place Cardiff

More information

Table of Contents INTEGRATED MANAGEMENT SYSTEM MANUAL

Table of Contents INTEGRATED MANAGEMENT SYSTEM MANUAL Table of Contents INTRODUCTION... 4 COMMON REQUIREMENTS... 5 1. SCOPE... 7 1.1 DESCRIPTION OF ORGANIZATION... 7 1.2 SCOPE OF CERTIFICATION... 7 1.3 THIRD PARTY CERTIFICATION... 7 2. REFERENCES... 8 3.

More information

Compliance Management Systems

Compliance Management Systems Certification Scheme Y03 Compliance Management Systems ISO 19600 ONR 192050 Issue V2.1:2015-01-08 Austrian Standards plus GmbH Dr. Peter Jonas Heinestraße 38 A-1020 Vienna, Austria E-Mail: p.jonas@austrian-standards.at

More information

Clearing and Settlement Procedures. New Zealand Clearing Limited. Clearing and Settlement Procedures

Clearing and Settlement Procedures. New Zealand Clearing Limited. Clearing and Settlement Procedures Clearing and Settlement Procedures New Zealand Clearing Limited Clearing and Settlement Procedures 30 November 2011 Contents Section A: Interpretation and Construction 6 Section 1: Introduction and General

More information

Cartel Electronics. AS 9100 Quality Systems Manual

Cartel Electronics. AS 9100 Quality Systems Manual Cartel Electronics AS 9100 Quality Systems Manual 1900 C Petra Lane Placentia, California 92870 Introduction Cartel Electronics, as a global supplier to the aviation, space, and space industries, has developed

More information

U & D COAL LIMITED A.C.N. 165 894 806 BOARD CHARTER

U & D COAL LIMITED A.C.N. 165 894 806 BOARD CHARTER U & D COAL LIMITED A.C.N. 165 894 806 BOARD CHARTER As at 31 March 2014 BOARD CHARTER Contents 1. Role of the Board... 4 2. Responsibilities of the Board... 4 2.1 Board responsibilities... 4 2.2 Executive

More information