ø Ball port DN15 mm /8" 7.20 (F03)

Size: px
Start display at page:

Download "ø Ball port DN15 mm /8" 7.20 (F03)"

Transcription

1 Floating all Valves eneral iece Flanged ulti Size / - / DN8-DN0 NSI lass 00 8W/8 () Series Valve dimensions S D H ø all reparation for actuation ø W ¼ & ¾" without nut - with nut Stem flats show valve ball position TxL thread F D Std. Unit all D H S W N F TxL Weight kg/lb DN8, DN0 mm /8" 7.0 (F0).00.0, x8 /, /8 inch UNF DN mm /8" 7.0 (F0) x8 / inch UNF DN0 mm /" 7.0 (F0) x8 / inch UNF DN mm /" 7.0 (F0) x8 inch UNF DN mm /" 8.00 (F0) x8 / inch UNF DN0 mm /" 8.00 (F0) x8 / inch UNF * Data in the chart refers NSI 00 Flanges Kv v

2 Size / - / DN8-DN0 NSI lass 00 8W/8 () Series omponents & materials a ,, Item Description aterial specifications Qty. ody 79 /L, 7 N00 Ends 79 /L, 7 N00 all F8, 7 N00 Stem r.0 H0D 7-H, 7 N00 * Seat TFE (KEL-F) * Seat housing 79 /L, 7 N00 * Seat seal TFE, raphite * ody seal TFE, raphite 7* Stem thrust seal TFE (KEL-F) 7a* nti-abrasion ring TFE (KEL-F) 8 Stop pin 8 0 9* Stem seal F TFE, TF, raphite () 0 Follower 78 L 0** Slide bearing TF Disc spring 9 7-7H Stem nut EN0- -80, 9 r 8 () 8 series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the 8 design. Item Description aterial specifications Qty. Locking clip 0 Handle 0 0 Serrated washer 9 Handle nut EN0- -80, 9 r 8 7 Sleeve V ody bolt EN , 9 r 8 8- Spring washer DIN nti-static spring 0 nti-static plunger 79 0 rrow flow 7 0 Tag (not shown) 7 0 onnet seal TFE, raphite Stem bearing TFE onnet 79 /L, 7 N00 8 olt EN0- -70, Spring washer DIN 7-0 Dog tag 7 0 * Repair kit components ** Only with HermetiX fire safe design

3 Floating all Valves eneral iece Flanged ulti Size - 8 DN0-DN00 NSI lass 00 8W/8 () Series Valve dimensions S D H ø all reparation for actuation ø W Q Stem groove shows valve ball position TxL thread F D DD Square Std. Unit all D H S W DD N F TxL Weight kg/lb DN0 mm /"-.7 (F07) X inch UNF DN80 mm /"-.0 (F) X inch UNF DN00 mm /"-.0 (F) X inch UNF DN0 mm " 0.00 (F) X inch UN DN00 mm " 0.00 (F) X 8 inch UN (-) Due to high valve torque pipe handle cannot be used. manual gear or automation means should be used to operate the valve. Kv v

4 Size - 8 DN0-DN00 NSI lass 00 8W/8 () Series omponents & materials a ,, 9 Item Description aterial specifications Qty. ody 79 /L, 7 N00 Ends 79 /L, 7 N00 all F8, 7 N00 Stem r.0 H0D 7-H, 7 N00 * Seat TFE (KEL-F) * Seat housing 79 /L, 7 N00 * Seat seal TFE, raphite * ody seal TFE, raphite 7* Stem thrust seal TFE (KEL-F) 7a* nti-abrasion ring TFE (KEL-F) 8 Stop pin 8 0 9* Stem seal F TFE, TF, raphite () 0 Follower 78 L 0** Slide bearing TF Disc spring 9 7-7H Stem nut EN0- -80, 9 r 8 Tab lock washer 0 0 () 8 series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the 8 design. Item Description aterial specifications Qty. Handle.St. Zinc plate, 0 L Stop plate 0 0 Wrench head F8 Wrench bolt EN0- -70/-80, 9 r 8/8 7 Sleeve V ody bolt EN , 9 r 8 8- Spring washer DIN ody bolt EN0- -70, Spring washer DIN nti-static spring 0 nti-static plunger 79 0 rrow flow 7 0 Tag (not shown) 7 0 onnet seal TFE, raphite Stem bearing TFE onnet 79 /L, 7 N00 8 olt EN0- -70, Spring washer DIN Dog tag 7 0 * Repair kit components ** Only with HermetiX fire safe design 7

5 Floating all Valves eneral iece Flanged ulti Size / - / DN-DN0 NSI lass 00 W Series Valve dimensions S D H ø all reparation for actuation E TxL thread F D ½ & ¾" without nut - with nut Stem flats show valve ball position Std. Unit all Standard design.0" bonnet Weight kg/lb S N F TxL D E H D H Std..0 onnet DN mm /8" 7.0 (F0).00.. X0 / inch UNF DN0 mm /" 7.0 (F0) X0 / inch UNF DN mm /" 7.0 (F0) X0 inch UNF DN mm /" 8.0 (F0) X / inch UNF DN0 mm /" 8.0 (F0) X / inch UNF

6 Size / - / DN-DN0 NSI lass 00 W Series omponents & materials 0 0 7a Item Description aterial specifications Qty. ody F8, 9 -, ronze R Ends F8, 9 -, ronze R all F8, 7 N00, ronze R Stem 79 /L, r.0 H0D 7-H, 7 N00 * Seat F TFE,TF, TFE (KEL-F) Seat housing 79 /L, 7 N00, ronze R * Seat seal TFE, raphite Seat sup 79 /L, 7 N00, ronze R * ody seal TFE, raphite 7* Stem thrust seal F TFE(), TF(), TFE (KEL-F) 7a* nti-abrasion ring F TFE(), TF(), TFE (KEL-F) 8 Stop pin 8 0 9* Stem seal F TFE, TF, raphite() 0 Follower 78 L 0** Slide bearing TF () series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the design. Item Description aterial specifications Qty. Disc spring 9 7-7H Stem nut EN0- -80, 9 r 8 Locking clip 8, 8 Handle 0 0 Serrated washer 9 Handle nut EN0- -80, 9 r 8 7 Sleeve V ody bolt EN , 9 r 8 Spring washer DIN 7 0 nti static spring 0 nti static plunger 79 0 Tag (not shown) 7 0 onnet seal TFE, raphite Stem bearing TFE onnet 79 L, F8 8 olt EN0- -70, Spring washer DIN 7 0 Dog tag 7 0 * Repair kit components ** Only with HermetiX fire safe stem seal 9

7 Floating all Valves eneral iece Flanged ulti Size - DN0-DN00 NSI lass 00 W Series Valve dimensions S D H reparation for actuation ø all Q Stem groove shows valve ball position / TxL thread F D DD Square Std. Unit all Standard design.0" bonnet Weight kg/lb S -DD N Q F TxL D H D H Std..0 onnet DN0 mm (F07) 0x X inch DN mm (F07) 0x X / inch DN80 mm " (F) X inch UNS DN00 mm " (F) X inch UNS (-) Due to high valve torque pipe handle cannot be used. manual gear or automation means should be used to operate the valve. 0

8 Size - DN0-DN00 NSI lass 00 W Series omponents & materials a Item Description aterial specifications Qty. ody F8, 9 -, ronze R Ends F8, 9 -, ronze R all F8, 7 N00, ronze R Stem 79 /L, r.0 H0D 7-H, 7 N00 * Seat F TFE,TF, TFE (KEL-F) Seat housing 79 /L, 7 N00, ronze R * Seat seal TFE, raphite Seat sup 79 /L, 7 N00, ronze R * ody seal TFE, raphite 7* Stem thrust seal F TFE(), TF(), TFE (KEL-F) 7a* nti-abrasion ring F TFE(), TF(), TFE (KEL-F) 8 Stop pin 8 0 9* Stem seal F TFE, TF, raphite() 0 Follower 78 L 0** Slide bearing TF () series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the design. Item Description aterial specifications Qty. Disc spring 9 7-7H Stem nut EN0- -80, 9 r 8 Tab lock washer 0 0 Handle.St. Zinc plate, 0 L Stop plate 0 0 Wrench head F8 Wrench bolt EN0- -70/-80, 9 r 8/8 7 Sleeve V ody bolt EN , 9 r 8 - Spring washer DIN 7-0 nti static spring 0 nti static plunger 79 0 Tag (not shown) 7 0 onnet seal TFE, raphite Stem bearing TFE onnet 79 L, F8 8 olt EN0- -70, Spring washer DIN 7 0 Dog tag 7 0 * Repair kit components ** Only with HermetiX fire safe stem seal

9 Floating all Valves eneral iece Flanged ulti Size / - DN-DN0 NSI lass 00 D7W Series Valve dimensions S D H D ø all ø ottom ball reparation for actuation W TxL thread F D ½ & ¾" without nut - with nut Stem flats show valve ball position Std. Unit Side all rt Down Side ort Standard design.0" bonnet Weight kg/lb S W N F TxL D D H D H Std..0 onnet DN mm /8" 7.0 (F0) X0 / inch UNF DN0 mm /8" 7.0 (F0) X0 / inch UNF DN mm /" 7.0 (F0) X0 inch UNF DN0 mm /" 8.00 (F0) X / inch UNF DN0 mm /" 8.0 (F0) X inch UNF (-) Due to high valve torque pipe handle cannot be used. manual gear or automation means should be used to operate the valve.

10 Size / - DN-DN0 NSI lass 00 D7W Series omponents & materials 0 0 7a Item Description aterial specifications Qty. ody F8, 9 -, ronze R Ends F8, 9 -, ronze R all F8, 7 N00, ronze R Stem 79 /L, r.0 H0D 7-H, 7 N00 * Seat F TFE,TF, TFE (KEL-F) * ody seal TFE, raphite 7* Stem thrust seal F TFE(), TF(), TFE (KEL-F) 7a* nti-abrasion ring F TFE(), TF(), TFE (KEL-F) 8 Stop pin 8 0 9* Stem seal F TFE, TF, raphite() 0 Follower 78 L 0** Slide bearing TF Disc spring 9 7-7H Stem nut EN0- -80, 9 r 8 Locking clip 8, 8 Handle 0 0 () D7 series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the D7 design. Item Description aterial specifications Qty. Serrated washer 9 Handle nut EN0- -80, 9 r 8 7 Sleeve V ody bolt EN , 9 r 8 Spring washer DIN 7 0 nti static spring 0 nti static plunger 79 0 Tag (not shown) 7 0 onnet seal TFE, raphite Stem bearing TFE onnet 79 L, F8 8 olt EN0- -70, Spring washer DIN 7 0 Dog tag 7 0 onnet 79 L, F8 8 olt EN0- -70, Spring washer DIN 7 0 Dog tag 7 0 * Repair kit components ** Only with HermetiX fire safe stem seal

11 Floating all Valves eneral iece Flanged ulti The HONI ryogenic ball valve identification code F 7 W - / X W - Size Service Series Design ody/end all/stem Seat/Seal End connection Special features Size ode inch mm () D () F N Service Full bore ryogenic Diverter bottom entry Fire safe ontrol Series 7 iece design NSI 0 NSI 00 7 NSI 0 Full bore 7 NSI 00 Full bore 77 N Full bore 78 N0 Full bore Full bore class 00 design 8 iece high ulty- valve Design () The cryogenic series is cleaned for O service as standard, no need for extra prefix. () Only applicable for 7 series () Not to be used as a stem material s standard all Habonim cryogenic valves come with an anti-static device. In some applications the available options above are limited to specific sizes please consult with Habonim for details. W ryogenic basic design, HermetiX stem seal HermetiX Fire safe stem seal ody/end S. St. F8 / F / S.St. /L ronze R 7 onel 9 -- all/stem S. Steel F8 7-H r 0 H0D () ronze onel 9 -- T Seat TF TFE (KEL-F) F TFE TFE raphite Special features RTJ Ring Type Joint ody made from rolled bar E Electropolished WR DD stem.. Internal surface finish (, ) V0 haracterized control ball.0 Short bonnet FF Flat face End connections Welded W uttweld schd. W0 uttweld schd. 0 W uttweld schd. 0 W80 uttweld schd. 80 XW Extended buttweld schd. 0 SW Socket weld XSW Extended socket weld WO uttweld tube OD ETO Extended tube OD SWO Socket weld tube OD WD uttweld DIN 0 ETJ Extended Tube JIS FT Flush Tank adaptive plate F Flush ipe adaptive plate KL opper tube (Imperial) XYZ opper tube (etric) ET Extended copper tube Threaded NT NSI.0. - National ipe Taper thread NT ale NT ST EN 0- - ritish Standard ipe Taper thread ST ale ST EN 0- - ritish Standard DIN999 ipe parralel thread EN 0- - ritish Standard DIN8 ipe parralel thread S0 SE internal straight thread LL L T R lamp Let Lock compression fitting (Imperial) Let Lock compression fitting (metric) Tri-lamp raylock Flanged 0 NSI. #0 RF 00 NSI. #00 RF 00 NSI. #00 RF 900 NSI. #900 RF N EN09 N RF N0 EN09 N0 RF N EN09 N RF N00 EN09 N00 RF N0 EN09 N0 RF

QLM and QLD Series Three-port Control Valves

QLM and QLD Series Three-port Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The

More information

Fire Hydrant Troubleshooting

Fire Hydrant Troubleshooting Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock

More information

Round Housing with Side Ports

Round Housing with Side Ports Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End

More information

Trunnion-Design Ball Valves

Trunnion-Design Ball Valves Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance

More information

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide: LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have

More information

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)

Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna) Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated

More information

Type 3244-1 and Type 3244-7 Pneumatic Control Valves. Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions EB 8026 EN

Type 3244-1 and Type 3244-7 Pneumatic Control Valves. Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions EB 8026 EN Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions E 8026 EN Edition July 2014 Definition of signal words DNGER! Hazardous

More information

10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring

10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01

More information

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

DRIVE AND DRIVEN PULLEY

DRIVE AND DRIVEN PULLEY 11 DRIVE AND DRIVEN PULLEY SCHEMATIC DRAWING ------------------------------------------------- 11-1 SERVICE INFORMATION------------------------------------------------ 11-2 TROUBLESHOOTING-----------------------------------------------------

More information

Metal Seated Valves Extreme Conditions / Severe Applications

Metal Seated Valves Extreme Conditions / Severe Applications etal eated Valves Extreme Conditions / evere pplications ETL ETE VLVE ow tough is tough? abonim s metal seated ball valves series is tough - designed to stand up to the most difficult process conditions

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

American- Darling 5¼" B-84-B-5.

American- Darling 5¼ B-84-B-5. -5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

FRL/AirCare Air Controls & Accessories

FRL/AirCare Air Controls & Accessories FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1 200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing

More information

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed

More information

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes

More information

CHROME FRONT BRAKE MASTER CYLINDER KIT

CHROME FRONT BRAKE MASTER CYLINDER KIT -J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder

More information

TRANS-05, Torque Tube Removal, Rebuilding, and Installation

TRANS-05, Torque Tube Removal, Rebuilding, and Installation TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket

More information

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00

BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00 Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts. Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1

More information

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.

More information

Fisher EDR and ETR easy-e Valves

Fisher EDR and ETR easy-e Valves Instruction Manual EDR and ETR Valves Fisher EDR and ETR easy-e Valves Contents Introduction... Scope of Manual... Description... Specifications... 2 Educational Services... 2 Installation... 4 Maintenance...

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

BIÇAKLI VANALAR/ KNIFE VALVES

BIÇAKLI VANALAR/ KNIFE VALVES IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single

More information

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure. Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962

More information

Mercedes 722.3 722.4

Mercedes 722.3 722.4 96 Mercedes 7. 7. 5 6 7 8 - Clutch K - Brake Band B - Disc Brake B - Wide Planet Pinion 5 - One-Way Clutch F 6 - Clutch K 7 - Brake Band B 8 - Narrow Planet Pinion Int. Band Fwd. Band Rev. Clutch Direct

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

BALL VALVES TECHNICAL CATALOGUE

BALL VALVES TECHNICAL CATALOGUE SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured

More information

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,

More information

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem

More information

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial

More information

Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve

Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.

More information

DO NOT attempt to repair hub and wheel bearing assembly.

DO NOT attempt to repair hub and wheel bearing assembly. Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack

More information

V47 Series Temperature Actuated Modulating Water Valves

V47 Series Temperature Actuated Modulating Water Valves V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

INSTALLATION INSTRUCTIONS P-TRAP SUPPLY KIT Model: RH-3016 These instructions are a guideline for a basic installation

INSTALLATION INSTRUCTIONS P-TRAP SUPPLY KIT Model: RH-3016 These instructions are a guideline for a basic installation INSTALLATION INSTRUCTIONS P-TRAP SUPPLY KIT Model: RH-3016 These instructions are a guideline for a basic installation Recommended Installation by a Professional Plumbing Contractor To find proper fit

More information

Before repairing your toilet, you must determine

Before repairing your toilet, you must determine Before repairing your toilet, you must determine which type of toilet you have. Pressurized Toilets If you have a pressurized toilet, it is recommended that you call a licensed plumbing contractor to repair

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

1 Important Safety Procedures. Qualified maintenance personnel should read and follow these straightforward instructions.

1 Important Safety Procedures. Qualified maintenance personnel should read and follow these straightforward instructions. Installation, Operating and Maintenance Instructions XL Series Actuators Contents Important Safety Procedures Mounting and Operating Instructions Piping Instructions Solenoid Valves on Spring Return Actuators

More information

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Installation, Operating and Maintenance Instructions 90/4.5.5 Rev. 0 Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Table of Contents SECTION I... 2 INSTALLATION...

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003

More information

Rating when used as a weight carrying hitch without spring bars:

Rating when used as a weight carrying hitch without spring bars: BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER 14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------

More information

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99 PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin

More information

Mueller B-101 and A-3 Drilling and Tapping Machines

Mueller B-101 and A-3 Drilling and Tapping Machines TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology

More information

DOUBLE BLOCK AND BLEED VALVES

DOUBLE BLOCK AND BLEED VALVES DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance

More information

Baumann 87000 Flexsleev Sanitary Control Valve

Baumann 87000 Flexsleev Sanitary Control Valve Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Installation, Operating and Maintenance Instructions for AEON Metal Seated Gate Valve (MSGV) Water

Installation, Operating and Maintenance Instructions for AEON Metal Seated Gate Valve (MSGV) Water 1 Foreword 1.1 Thank you for choosing one of the range of AEON's BS standard valves. For safety purposes, the user shall read this instruction to fully understand the operation of the product. 2 AEON Design

More information

800-348-8467 www.fittingsunlimited.com

800-348-8467 www.fittingsunlimited.com Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections

More information

Installation Instructions 6028.801

Installation Instructions 6028.801 DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American

More information

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide

More information

STEERING SYSTEM - POWER

STEERING SYSTEM - POWER STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and

More information

Flanged and Butt-= Weld Type

Flanged and Butt-= Weld Type Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design

More information

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496

More information

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve

More information

SISTO-16TWA/HWA/DLU. Type Series Booklet

SISTO-16TWA/HWA/DLU. Type Series Booklet Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents

More information

Joplin Rebuild Instructions

Joplin Rebuild Instructions Joplin Rebuild Instructions This is a step by step list of instruction on how to rebuild the Crankbrothers Joplin post. It may not always be required to completely tear-down the post to do the work needed

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

Step-by-step instructions:

Step-by-step instructions: Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

Assembling an AR-15 Parts CheckList:

Assembling an AR-15 Parts CheckList: Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...

More information

RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE

RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

Rear wheel brakes, servicing. Стр. 1 из 45. Note:

Rear wheel brakes, servicing. Стр. 1 из 45. Note: Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly

More information

M A N U A L 13-10-05

M A N U A L 13-10-05 Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1

PET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1 Model 959 0 0 00-00 7 6:56.0.00 tool and accessories tool - 7 06 jack - 7 0 operating rod - 7 03 tool bag - 7 0 spark plug wrench - 0 A ring wrench 36 MM - - tyre pressure gauge L 709 0-999 57 05 0 rim

More information

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

More information

DANA 30 MANUAL HUB CONVERSION KIT

DANA 30 MANUAL HUB CONVERSION KIT DANA 30 MANUAL HUB CONVERSION KIT 12194 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN Your safety and the safety of other motorists is very important. Your Jeep is an off road capable vehicle

More information

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1 Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette

More information

Baumann 24000SB Barstock Control Valve

Baumann 24000SB Barstock Control Valve Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...

More information

16001 cross - pair 0 200 37 16002 lever - pair 0 400 19. 16003 pair w/wrench 0 100 17. 16004 cross - pair 0 100 35 16005 lever - pair 0 100 33

16001 cross - pair 0 200 37 16002 lever - pair 0 400 19. 16003 pair w/wrench 0 100 17. 16004 cross - pair 0 100 35 16005 lever - pair 0 100 33 Faucet Repair a. Fit All Handles b. ROC Faucet Repair Parts c. Generic American Standard Replacement Parts d. Generic Central Brass Replacement Parts e. Generic Chicago Faucet Replacement Parts f. Generic

More information

1.8 CRANKSHAFT OIL SEALS

1.8 CRANKSHAFT OIL SEALS SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve Instruction Manual CV500 Valve Fisher CV500 Rotary Globe Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 3 Maintenance...

More information