Cryogenic valves. Inspired By Challenge

Transcription

1 Inspired By Challenge

2 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Introduction Under extremely low temperatures and in the harshest of environments, Habonim s cryogenic ball valves consistently exhibit high flow capacity, tight shutoff, energy efficiency and long service-free life. Unmatched in reliability, stability and, most importantly, safety, Habonim's cryogenic valves are used in air separation plants, LNG storage, distribution and transportation, and in the aerospace, petrochemical and medical industries. Technical summary Size range ressure range Temperature range aterials End connections Operation Service ¼ -8" (DN8-DN00) Vacuum 0 - Tor to bar (000 psi) -9 C to +00 C (- F to +39 F) Stainless steel A3 CF8/CF3, A79, 3/3L, monel 00 and more Threaded, welded, flanged Lever or gear operated, pneumatic or electric actuated LNG terminals, air separation plants, LNG transportation, steel production, food & beverage, research labs Standards of compliance Factory certification ISO Quality management system ANSI B.3, ISO 79, Valve design AI D/ISO 33 BS 3 Specification for valves for cryogenic service EN 7 Industrial valves - Isolating valves for LNG (optional) BS ISO 0 & BS EN Cryogenic vessels - Valves for cryogenic service ANSI B.0. NT - National ipe Taper thread EN 0-, ISO 7-, JIS B003 BST - British Standard ipe Taper thread DIN38 BS - British Standard aralell ipe ANSI B., EN 70 Socket weld end connection ANSI B., EN7- Buttweld end connection (schedule, 0, 0, 80) ANSI B., EN 09 t & Flange dimensions ANSI B.0, EN 8 Face-to-Face dimensions NACE R-07, ISO -//3 aterials for use in H S-containing environments in oil and gas production EN -, AI 98 Testing of metallic valves - pressure tests, test procedures and acceptance criteria Certifications AI 07, ISO 097 Testing of valves - Fire type-testing requirements ISO 88- Industrial valves - measurement, test and qualification procedures for fugitive emissions ED 97/3/EC odule H ressure equipment directive ATEX 9/9/EC equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only) IEC 08- SIL /3 Safety integrity level - functional safety of electrical/electronic/programmable electronic safety-related systems (optional for actuated unit only) Documentation EN 00./3./3. etallic materials - types of inspection documents

3 General Series in range Three piece C7C/C7W series Three piece, standard and full port Size range / - " (DN8 - DN0) ressure range ANSI Class 00 Vacuum 0 - Tor to 03 bar (90 psi) Size range / - " (DN - DN0) ressure range ANSI Class 300 Vacuum 0 - Tor to 0 bar (7 psi) End connections Threaded, welded, flanged CC/CW series Size range ressure range End connections Three piece, full port "- 8" (DN0 - DN00) ANSI Class 00 Vacuum 0 - Tor to 03 bar (90 psi) Threaded, welded, flanged Flanged C3C/C3W series Standard port Size range / - 8 (DN - DN00) ressure range ANSI Class 0 Vacuum 0 - Tor to 0 bar (90 psi) End connections Flanged C3C/C3W series Size range ressure range End connections C73C/C73W series Size range ressure range End connections C7C/C7W series Size range ressure range End connections C78C/C78W series Size range ressure range End connections C77C/C77W series Size range ressure range End connections Standard port / - 8 (DN - DN00) ANSI Class 300 Vacuum 0 - Tor to 0 bar (7 psi) Flanged Full port / - 8 (DN - DN00) ANSI Class 0 Vacuum 0 - Tor to 0 bar (90 psi) Flanged Full port / - 8 (DN - DN00) ANSI Class 300 Vacuum 0 - Tor to 0 bar (7 psi) Flanged Full port / - (DN - DN0) DIN N0 Vacuum 0 - Tor to 0 bar (80 psi) Flanged Full port 3-8 (DN80 - DN00) DIN N Vacuum 0 - Tor to bar (30 psi) Flanged High ressure C8C/C8W series Three piece, standard and full port Size range / - (DN8 - DN0) ressure range ANSI Class 00 Vacuum 0 - Tor to bar (000 psi) Size range / - 8 (DN - DN00) ressure range ANSI Class 00 Vacuum 0 - Tor to bar (3700 psi) End connections Threaded, welded, flanged ultiport CC/CC/CW/CW Standard and full port Size range / - " (DN8 - DN0) ressure range ANSI Class 00 Vacuum 0 - Tor to 03 bar (90 psi) Size range / - " (DN - DN00) ressure range ANSI Class 300 Vacuum 0 - Tor to 0 bar (7 psi) End connections Threaded, welded, flanged DC7C/DC7W series Size range ressure range Size range ressure range End connections Three piece, standard and full port / - " (DN8 - DN0) ANSI Class 00 Vacuum 0 - Tor to 03 bar (90 psi) / - " (DN - DN0) ANSI Class 300 Vacuum 0 - Tor to 0 bar (7 psi) Threaded, welded, flanged 3

4 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Design features Efficient heat transfer Narrow space between extension ID and stem OD keeps the stem seal at ambient temperture Bonnet angle Up to from vertical allowed for the " bonnet (fully BS3 compliant) Graphite free fire safe stem seal HermetiX stem seal HermetiX Stem seal ISO 88- certified Graphite free, fire safe certified High endurance up to 00 thousand cycles Anti-abrasion mechanism Live loaded No trapped cavity Relief hole on the upstream sphere of the ball to prevent pressure buildup in the cavity inimum thermal expansion One size up and shorter body bolts Additional spring washers Stem 'Blow-out' proof Solid one-piece stem Tight stem-to-ball engagement High torque durability One-way assembly Integral rib and asymmetric groove ensures correct assembly Stem, bonnet robust design Efficient heat transfer Tongue & groove labyrinth design Zero leakage to the atmosphere Full compression of encapsulated body seal Accurate alignment of all parts Flow direction indicators Highly visible arrows on body and bonnet top "T" mark on the stem, showing relief hole direction Tongue and groove Zero leak No trapped cavity One-way assembly inimum thermal expansion

5 General " Bonnet unique design features Habonim has designed the " bonnet for cryogenic valves for: confined spaces, equipment installed on transportable pressure vessels, and systems exposed to high vibrations. This solid one-piece stainless steel CF8 /3 bonnet is accurately machined for perfect alignment of all trim parts. The " bonnet is fully exchangeable with with a long bonnet that meets the BS3 standard for 0 mm (0") of straight bonnet neck. Bonnet angle Up to from vertical " short bonnet inimal fluid layer between bonnet and stem assures leak free stem seal

6 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system ressure buildup prevention The Habonim cryogenic ball valve is designed with no trapped cavities. A cavity relief hole faces upstream and eliminates pressure buildup caused by thermal expansion. One-way assembly An integral rib is machined at one of the stem flats to match a groove in the ball that faces the relief hole. A "T" mark on the stem tip shows the relief hole direction. These two features ensure a one-way assembly for safe operation and maintenance. Stem integral rib ball groove Inclination limitation The Habonim bonnet design comes in two standard versions. Both are designed to prevent cryogenic liquids from reaching the stem seal. Habonim recommends installation in the vertical position, but allows installation at an angle. The " bonnet can be installed up to from the vertical axis. The " bonnet can be installed up to from the vertical axis. Cryogenic valve body and interlocked end connector The cryogenic valve series implements the tongue & groove design that is used in all fire safe valves. This unique labyrinth design eliminates leakage to the atmosphere. Furthermore, this design allows full compression of the encapsulated body seal and accurate alignment of all valve pressure-containing parts. Hybrid seat for high pressure cryogenic applications

7 General Flow direction indicators "T" mark on stem showing the relief hole direction Seats and seals For temperatures down to -00 C/-38 F, Habonim recommends the use of either TF 00 or Habonim CF TFE seats - for a lower operating torque, smaller actuator and a cost effective product. For temperatures down to -9 C/- F, Habonim recommends the use of CTFE (KEL-F). A hybrid seat comprised of a stainless steel housing and a CTFE (KEL-F) insert is Habonim s recommendation for high pressure cryogenic applications. When CTFE seats are sized for the application, a high tensile 7-H stem (code ) must be used to overcome the high operating torque. Both graphite and TFE body seals are used in the cryogenic series, with TFE for non-fire safe applications and graphite for fire safe applications. Both seal types are designed to accommodate the same body/end encapsulation. Boiling point of cryogens Seats o C \ -09 o F CO -. o C \ -9 o F ethane -8 o C \ -70 o F LNG Indicator on the extended bonnet top -83 o C \ -97 o F -8 o C \ -303 o F Oxygen Argon TF CF TFE -88 o C \ -30 o F Fluorine -9. o C \ -38 o F Air -9 o C \ -3 o F Nitrogen -3.8 o C \ - o F Hydrogen -9 o C \ - o F Helium CTFE Indicator on valve body inimum thermal expansion Using one-size-up and double the amount of body bolts reduces linear thermal expansion and dramatically decreases the likelihood of leakage to the atmosphere. In addition, spring washers compensate for thermal contraction of valve parts that occur during the thermal cycles. Efficient heat transfer The Habonim standard bonnet length design complies with BS3 for non-cold-box applications. The long neck bonnet insulates the stem seal from the low temperatures of cryogenic fluids, thus enabling safe and long lasting seal service. A thin layer of liquid cryogenic media between the bonnet ID and the stem OD, enables safe evaporation of cryogenic fluid at the ambient environment temperature. 7

8 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Cleaning standards Habonim's meticulous valve assembly procedure eliminates hydrocarbon oil, grease, metal chips and other ignition hazards that can be introduced by a poor deburring process or shop dirt. Habonim procedures for cleaning and inspecting valve parts that are used in Oxygen service are also applicable for Cryogenic service and comply with all relevant international standards and corporate specifications: CGA G-. AST A380/A380 EIGA 33.0 Linde standard LS -7 part and Linde standard LS 03-X7 raxair standard GS-38 Habonim uses a state of the art, environmentally friendly, alkaline-based automatic degreasing system with multiple stages of ultrasonic cleaning, rinsings and drying chambers. Complete control over process parameters like the cleaning agent H and temperature, the rinsing temperature chambers, and the temperature and humidity inside the drying chamber provides optimal results and full repeatability of the cleanliness level of the cleaned parts. The cleaning procedure is followed by 00% cleaning inspection as per leading industry standards. Valve assembly Upon completion of the cleaning process the valves are assembled in an oil free restricted area, by trained personnel who are qualified for this particular task. The employees wear clean working clothes and latex gloves throughout the assembly procedure. The equipment and tools are cleaned before use and the work surfaces are covered with a clean polyethylene sheet before performing the valve assembly. Strength test Shell test of the complete assembled product at. times the valve pressure rating is performed with a computer controlled high-pressure testing chamber, using % clean compressed nitrogen. This safe and reliable pressure testing meets EN - and AI 98 standards. Functional test Gas Service Leak Rates are EN - Rate A \ Bubble Tight Shutoff \ AI 98 \ AI D \ ISO 08. Cryogenic Service Leak Rates comply with standards such as BS 3, ISO and EN 7. Test method EN 779 vacuum technique - A.3 Leakage E- a*m3/sec. 8

9 ultiport NDT Radiographic tests per ASE B3.3 for severe cyclic service are standard for welded parts. Habonim uses only 00% buttwelded joints to ensure full welding penetration. 00% X-ray test coverage ensures the highest levels of safety and quality. Radiographic tests per ASE B.3 RT for castings and other pressure-containing parts can be conducted upon request, along with die penetrant test per ASE B.3 RT, and visual inspection of castings per SS-S-. Quality Assurance Habonim cryogenic valves are supplied with a detailed EN-00 test certificate type 3. as standard. 3. type certifications, witnessed pressure and cryogenic tests and other services are available upon request. Standard Habonim tests Test Standard Success criteria Valve Shell test at. the pressure rating EN - (0-) AI 98 No visible gas leakage ASE B.3 Radiographic For Fabricated (Welded) arts ASE B3.3 Severe Cyclic Conditions Body Leakage test EN - ethod EN 779 vacuum technique - A.3 Seat tightness test EN - ethod EN 779 vacuum technique - A.3 Cleaning CGA G., raxair GS-38 or GS0, Linde -7 part and BV code, Section V, Article Leakage E - a*m 3 /s Leakage E - a*m 3 /s er standard Additional NDTs offered upon special request Test Standard Success criteria IACT -9 C EN7 AST A370 testing ethods EN 00- Kv > 0J Lateral expansion > 0.38 mm Visual test for casting SS-S er standard Liquid penetrant Fabricated parts ASE B3.3 Severe cyclic conditions Liquid penetrant cast parts AST E B.3 andatory Appendix III Cryogenic tests BS3, EN7 Witnessing by 3rd party er society standards & rules ackaging ackaging is done in the same cleanroom where the assembly process took place. Valves and components are not removed from the cleanroom until they are properly packed and sealed. Each finished (dry, completed, inspected and approved) product is capped with non-shedding end caps and bagged in resilient clear polyethylene bags together with silica gel desiccant bags to maintain the product cleanliness. In order to preserve product cleanliness, it is crucial to store the valves in their protective elements as they were received from the factory until they are ready to be installed. 9

10 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system ultiport and Diverter valves Habonim s C ultiport and DC7 diverter cryogenic lines are extremely flexible and space saving valves. They enable the piping and machine designer to save valves, space, flow elements, while enhancing safety and simplicity. With a variety of flow patterns and directions, in both automatic and manual configurations, the multiport valve can save -3 valves, and facilitate safe and easy changeover and shutoff of cryogenic fluids. A variety of ball configurations for different flow patterns are available. For the complete range of configurations, please refer to the Diverter or ultiport valve chapters. 0

11 General Double Block and Bleed (DBB) Cryogenic Double Block and Bleed valves are extremely compact and safe devices that allow the user to provide total leak-proof safety by directing the main valve cavity to a safe location, thus securely isolating gas furnaces, marine motors, LNG tanks, and LNG fueled trucks, from explosive and cold cryogenic fluids such as LNG, LOX etc. The principle of operation is to have two main valves in the flow direction, where the secondary valve ensures no leakage under all circumstances, and a bleed valve perpendicular to the main piping forces any excess gas/fluid in the main cavity to vent to a secure location. Habonim meets the challenge by providing safe, compact, built-to-spec double block and bleed cryogenic valves in a full range of configurations including: full and semi-automatic, manual, and hand lock. Other customer-specified configurations are available ranging from ½ up to main valves and bleed valves to match. Double block and bleed valves operate safely when the valve is installed correctly, with the bonnets remaining upright as shown.

12 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size - DN8-DN0 Class 00 C7W/C7C () Series Valve dimensions S D C G H ø Ball port reparation for actuation ø W B A ½ & ¾" without nut - with nut Stem flats show valve ball position TxL thread F CD Std. Full Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port port C D G H C D G H Std..0" Cv DN DN0 mm /8 7.0 (F03) x0 /" 3/8" inch UNF DN0 DN mm /8 7.0 (F03) x0 3/" /" inch UNF DN DN0 mm / 7.0 (F0) x0 " 3/" inch UNF DN3 DN mm / 7.0 (F0) x0 /" " inch UNF DN0 DN3 mm / 8.00 (F0) x /" /" inch UNF DN0 DN0 mm / 8.0 (F0) x " /" inch UNF

13 Size - DN8-DN0 Class 00 C7W/C7C () Series Components & materials A 7a A A 8 8 8A Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A H Stem nut EN30- A-80, A9 Gr 8 3 Locking clip A7 8, 8A () C7C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C7C design. Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 8 Body bolt EN 30- A-70, A93 Gr B8 8 8A Spring washer DIN 7 A 8 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 3

14 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size ½ - DN-DN0 Class 300 C7W/C7C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W Q Stem groove shows valve ball position TxL thread F CD DD Square Std. port Full port Unit Ball port A B Standard design.0" bonnet Weight kg/lb Kv S W DD N Q F TxL C D G H C D G H Std..0" Cv DN DN0 mm / (F07) x0 / " inch UNS DN80 DN mm (F0) x0 3 /" inch UNS-A DN00 DN80 mm (F0) x0 3 inch UNS-A DN00 mm (F0) x0 Inch UNS-A DN0 mm / (F) x0 inch UNS-A () C7C series is Habonim's standard valve design without the HermetiX stem seal construction.

15 Size ½ - DN-DN0 Class 300 C7W/C7C () Series Components & materials 7 7B 3 7 A 0 0A 7a A 30 3 A 8A 8 8A 8 Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite A Support ring A3 CF8 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 3 Tab lock washer A0 30 () C7C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C7C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN 30- A-70, A93 Gr B8 8 8A Spring washer DIN 7 A 8 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design

16 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size - 8 DN0-DN00 Class 00 CW/CC () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W Q Stem groove shows valve ball position TxL thread F CD DD Square Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W DD N F TxL port port C D G H C D G H Std..0" Cv DN0 mm "-.70 (F0) X inch UNF DN80 mm / -.0 (F) x 3 inch UNF-A DN00 mm / -.0 (F) x inch UNF-A DN0 mm ' 0.00 (F) X8 inch UN-A DN00 mm / ' 0.00 (F) X8 8 inch UN-A (-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.

17 Size - 8 DN0-DN00 Class 00 CW/CC () Series Components & materials B 7 3 A 0 0A 7a A A 8A, A B 3 B A 8 Body A3 CF8, A9 3-, Bronze RG End A79 3/3L, A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE,TF, CTFE (KEL-F) A* Seat housing A3 CF8, A9 3-, Bronze RG B* Seat seal TFE, Graphite * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 () CC series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the CC design. 3 Tab lock washer A0 30 Handle C.St. Zinc plate, A0 3L A Stop plate B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN 30- A-70, A93 Gr B A Spring washer DIN 7 A Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 7

18 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN-DN0 ANSI Class 0 C3W/C3C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W TxL thread F CD ½ & ¾" without nut - with nut Stem flats show valve ball position Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN mm (F03) /8 UNF x0 / inch DN0 mm (F03) /8 UNF x0 3/ inch DN mm / UNF 7.0 (F0) x0 inch DN0 mm / UNF 8.00 (F0) x / inch DN0 mm / UNF 8.0 (F0) x inch

19 Size / - DN-DN0 ANSI Class 0 C3W/C3C () Series Components & materials 3 0 0A A 30 A 3 Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite A*** Support ring A79 3L, B7 N00 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H () C3C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C3C design. Stem nut EN30- A-80, A9 Gr 8 3 Locking clip A7 8, 8A Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 9 A Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design *** Only with graphite body seal 9

20 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size 3-8 DN80-DN00 ANSI Class 0 C3W/C3C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q Stem groove shows valve ball position TxL thread F CD DD Square Std. Unit Ball A Standard design.0" bonnet Weight kg/lb Kv B S W DD N Q F TxL port port 0 A300 C D G H C D G H Std..0" Cv DN80 mm (F0) x0 3 inch UNS-A DN00 mm (F0) x0 inch UNS-A DN0 mm / (F) x0 inch UNS-A DN00 mm / (F) x0 8 inch UNS-A (-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve. 0

21 Size 3-8 DN80-DN00 ANSI Class 0 C3W/C3C () Series Components & materials B 7 3 A 0 0A 7a A Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE,TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 3 Tab lock washer A0 30 () C3C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C3C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design

22 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN-DN0 ANSI Class 300 C3W/C3C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W TxL thread F CD ½ & ¾" without nut - with nut Stem flats show valve ball position Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN mm (F03) /8 UNF x0 / inch DN0 mm (F03) /8 UNF x0 3/ inch DN mm / UNF 7.0 (F0) x0 inch DN0 mm / UNF 8.00 (F0) x / inch DN0 mm / UNF 8.0 (F0) x inch

23 Size / - DN-DN0 ANSI Class 300 C3W/C3C () Series Components & materials 3 0 0A A 30 A 3 Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite A*** Support ring A79 3L, B7 N00 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H () C3C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C3C design. Stem nut EN30- A-80, A9 Gr 8 3 Locking clip A7 8, 8A Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 9 A Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design *** Only with graphite body seal 3

24 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size 3-8 DN80-DN00 ANSI Class 300 C3W/C3C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q Stem groove shows valve ball position TxL thread F CD DD Square Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W DD N Q F TxL port port C D G H C D G H Std..0" Cv DN80 mm (F0) x0 3 inch UNS-A DN00 mm (F0) x0 inch UNS-A DN0 mm / (F) x0 inch UNS-A DN00 mm / (F) x0 8 inch UNS-A (-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.

25 Size 3-8 DN80-DN00 ANSI Class 300 C3W/C3C () Series Components & materials B 7 3 A 0 0A 7a A Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 3 Tab lock washer A0 30 () C3C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C3C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design

26 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN-DN ANSI Class 0 C73W/C73C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W ½ & ¾" without nut - with nut Stem flats show valve ball position TxL thread F CD Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN mm /8 UNF 7.0 (F03) x0 / inch DN0 mm /8 UNF 7.0 (F03) x0 3/ inch DN mm / UNF 7.0 (F0) x0 inch

27 Size / - DN-DN ANSI Class 0 C73W/C73C () Series Components & materials A 7a A 30 3 Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 () C73C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C73C design. 3 Locking clip A7 30 Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 9 A Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 7

28 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN0-DN0 ANSI Class 0 C73W/C73C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q TxL thread F CD Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN0 mm / (F0) x / inch UNF-A DN0 mm / (F07) x inch UNF-A

29 Size / - DN0-DN0 ANSI Class 0 C73W/C73C () Series Components & materials B 7 3 A 0 0A 7a A 8 8A A 3 8 Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE ), TF (), CTFE (KEL-F) 8 Stop bolt A A Spring washer DIN 7 A 9* Stem seal CF TFE, TF, Graphite 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 8 3 Tab lock washer A0 30 () C73C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C73C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN 30- A-70, A93 Gr B8 8A Spring washer DIN 7 A 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 9

30 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size 3-8 DN80-DN00 ANSI Class 0 C73W/C73C ()) Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q Stem groove shows valve ball position TxL thread F CD Square Std. Ball Standard design.0" bonnet Unit A B S W port port DD N Q F TxL Weight kg/lb Kv C D G H C D G H Std..0" Cv DN80 mm (F0) x0 3 inch UNS-A DN00 mm (F0) x0 inch UNS-A DN0 mm / (F) x0 inch UNS-A DN00 mm / (F) x0 8 inch UNS-A (-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve. 30

31 Size 3-8 DN80-DN00 ANSI Class 0 C73W/C73C ()) Series Components & materials B 7 3 A 0 0A 7a A A Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 8 3 Tab lock washer A0 30 () C73C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C73C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN30- A-70, A93 B A Spring washer DIN 7 A Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 3

32 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN-DN ANSI Class 300 C7W/C7C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W ½ & ¾" without nut - with nut Stem flats show valve ball position TxL thread F CD Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN mm /8 UNF 7.0 (F03) x0 / inch DN0 mm /8 UNF 7.0 (F03) x0 3/ inch DN mm / UNF 7.0 (F0) x0 inch

33 Size / - DN-DN ANSI Class 300 C7W/C7C () Series Components & materials A 7a A 30 3 Body A3 CF8, A9 3-, Bronze RG lug A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 Gr 8 () C7C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C7C design. 3 Locking clip A7 30 Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 33

34 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN0-DN0 ANSI Class 300 C7W/C7C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q TxL thread F CD Std. Ball Standard design.0" bonnet Weight kg/lb Kv Unit A B S W N F TxL port port C D G H C D G H Std..0" Cv DN0 mm / (F0) x / inch UNF-A DN0 mm / (F07) x inch UNF-A

35 Size / - DN0-DN0 ANSI Class 300 C7W/C7C () Series Components & materials B 7 3 A 0 0A 7a A 8 8A A 3 8 Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE ), TF (), CTFE (KEL-F) 8 Stop bolt A A Spring washer DIN 7 A 9* Stem seal CF TFE, TF, Graphite() 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 8 3 Tab lock washer A0 30 () C7C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C7C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body stud EN30- A-70, A93 B8 8A Spring washer DIN 7 A 9 Body Nut EN30- A-80, A9 8 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 3

36 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size 3-8 DN80-DN00 ANSI Class 300 C7W/C7C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q Stem groove shows valve ball position TxL thread F CD Square Std. Ball Standard design.0" bonnet Unit A B S W Weight kg/lb Kv N Q F TxL port port C D G H C D G H DD Std..0" Cv DN80 mm (F0) x0 3 inch UNS-A DN00 mm (F0) x0 inch UNS-A DN0 mm / (F) x0 inch UNS-A DN00 mm / (F) x0 8 inch UNS-A (-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve. 3

37 Size 3-8 DN80-DN00 ANSI Class 300 C7W/C7C () Series Components & materials B 7 3 A 0 0A 7a A A Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 8 3 Tab lock washer A0 30 () C7C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C7C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN30- A-70, A93 B A Spring washer DIN 7 A Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt A93 B8, DIN 9 A-70 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 37

38 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN-DN DIN N0 C78W/C78C () Series Valve dimensions S D C G H ø Ball port reparation for actuation B A ø W ½ without nut ¾" - with nut Stem flats show valve ball position TxL thread F CD Std. port Unit Ball A Standard design.0" bonnet weight kg/lb Kv B S W N F TxL port F F C D G H C D G H F F Cv DN mm /8 UNF 7.0 (F03) x0 / inch DN0 mm /8 UNF 7.0 (F03) x0 3/ inch DN mm / UNF 7.0 (F0) x0 inch

39 Size / - DN-DN DIN N0 C78W/C78C () Series Components & materials A 7a A Body X CrNio 7 3 (.0), NiCr0Cuo (.0), Bronze RG lug X CrNio 7 3 (.0), NiCr0Cuo (.0), Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE (), TF (), CTFE (KEL-F) 8 Stop pin A * Stem seal CF TFE, TF, Graphite () 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H () C78C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C78C design. Stem nut EN30- A-80, A9 Gr 8 3 Locking clip A 30 Handle A0 30 Serrated washer A9 Handle nut EN30- A-80, A9 Gr 8 7 Sleeve VC 8 Body bolt 9 Spring washer 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 9 A Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design 39

40 Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Size / - DN0-DN0 DIN N0 C78W/C78C () Series Valve dimensions S D C G H ø Ball port reparation for actuation A B ø W Q TxL thread F CD Weight kg/lb Std. Ball A Standard design.0" bonnet Kc Unit B S W N F TxL Std..0" port port F F C D G H C D G H F F F F Cv DN0 mm / (F0) x / inch UNF-A DN0 mm / (F07) () 8x C78C series inch is.00 Habonim's standard.39 valve.9 design 7.33 without the HermetiX stem.0 seal construction UNF-A

41 Size / - DN0-DN0 DIN N0 C78W/C78C () Series Components & materials B 7 3 A 0 0A 7a A 8 8A A 3 8 Body A3 CF8, A9 3-, Bronze RG End A3 CF8, A9 3-, Bronze RG 3 Ball A3 CF8, B7 N00, Bronze RG Stem A79 3/3L, A Gr.30 H0D 7-H, B7 N00 * Seat CF TFE, TF, CTFE (KEL-F) * Body seal TFE, Graphite 7* Stem thrust seal CF TFE (), TF (), CTFE (KEL-F) 7a* Anti-abrasion ring CF TFE ), TF (), CTFE (KEL-F) 8 Stop bolt A A Spring washer DIN 7 A 9* Stem seal CF TFE, TF, Graphite 0 Follower B783 3L 0A** Slide bearing TF3 Disc spring A93 Gr H Stem nut EN30- A-80, A9 8 3 Tab lock washer A0 30 () C78C series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of the C78C design. Handle C.St. Zinc plate, A0 3L A Stop plate A0 30 B Wrench head A3 CF8 Wrench bolt EN30- A-70/A-80, A93 Gr B8/B8 7 Sleeve VC 8 Body bolt EN 30- A-70, A93 Gr B8 8A Spring washer DIN 7 A 0 Anti-static spring A33 30 Anti-static plunger A79 30 Arrow flow A Tag (not shown) A7 30 Bonnet seal TFE, Graphite Stem bearing TFE Bonnet A79 3L, A3 CF8 8 Bolt EN30- A-70, A93 B8 8A Spring washer DIN 7 A 30 Dog tag A7 30 * Repair kit components ** Only with HermetiX fire safe design