SERIES C CRYOGENIC BALL VALVES

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SERIES C CRYOGENIC BALL VALVES"

Transcription

1 SERIES C CRYOGENIC BALL VALVES

2 SHARPE HIGH PERFORMANCE CRYOGENIC BALL VALVES Sharpe Cryogenic Series Ball Valves offer as standard features advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES Valves meet test specifications of BS3 for Cryogenic Valves Pressure relief hole in side of ball Permanent Attached Flow Arrow Relief hole in stem slot Live load stem packing (Belleville) Visual position indicator Special cleaning Packing Extended stem and bonnet Size Ranges and Pressure Classes Available Series C/C99/CD Bottom Entry Stem ADVANTAGES Insures proper construction and testing. Upstream vent for excessive valve cavity pressure in closed position. Reduce possibility of incorrect valve installation. Equalizes valve cavity pressure and line pressure in open position. Provides long intervals between stem packing adjustments, decreasing emissions through the packing. Provides easy identification of valve position Ready to use in critical applications Keeps the valve in Factory-new condition until it is to be installed. Positions stem and stem packing away from cryogenic fluid to prevent stem seal freeze-up and to ensure emission-free service. 1/ - -1/ Standard Port, 1/ - Full Port, Meet wall thickness requirement of ANSI B 1.3 for class 00, 3 - Standard Port Class 300, and -1/ - 3 Full Port Class 300. In-line serviceable swing-out center section allows easy access to internal valve components without disturbing alignment of pipe. Prevents accidental removal of stem under pressure. Self adjusts with pressure and temperature fluctuations. Bottom entry system helps prevent accidents and injuries. High Cycle Stem Packing Fully Encapsulated Body Seals (Series C/C99/CD) Integral Mounting Pad ISO 11 Lockable Handle Traceability * Carbon and Graphite Filled TFE PEEK and Nova* thrust bearings and stem seals extend valve cycle life and are the best choice for actuation. Allows valve ends to be welded in line without disassembly, saving costly labor time. Also prevents seal ruptures in high pressure and eliminates cold flow. Ideal for actuation. Centering lip feature assures precise alignment of bracket, stem and coupler. Allows for secondary containment unit to be added when necessary. All Sharpe Series C Valves meet OSHA standards with locking device. Keeps valves from being opened or closed accidentally. Heat numbers are provided on all valve bodies and ends. CMTR s ( certified mill test reports ) are available upon request.

3 SERIES C/C99 VALVE PARTS AND IDENTIFICATION C 1/ - -1/ C99 1/ - C 3 - C99-1/ - 3 1B 1C 1A C 1 1B A A A A PART NO. PART QTY. MATERIAL 1 Body 1 Stainless Steel 31 ASTM A31 CFM Pipe Ends Stainless Steel 31L ASTM A31 CF3M Bronze ASTM B/B C300 3 Ball 1 Stainless Steel 31 Stem 1 Stainless Steel 31 / 1-PH Valve Seat PCTFE - KEL-F ** / Reinforced TFE Body Seal TFM / RTFE Thrust Bearing 1 Nova* A Stem Location 1 Stainless Steel Ring (3 & ) Thrust Bearing 1 PEEK A Thrust Bearing 1 Nova* 9 Stem Packing Nova* 9A Stem Packing 3 Nova* (3 & ) 10 Seal Protector 1 PEEK 11 Gland Packing 1 Stainless Steel 1 Belleville Washer Stainless Steel 13 Packing Nut 1 Stainless Steel 1 Lock Tab 1 Stainless Steel 1 Lower Lock Latch 1 Stainless Steel * Nova: Carbon and Graphite Filled TFE ** Kel-F is registed trade mark of 3M Company. *** TFM is registered trade mark of Dyneon,LLC PART NO. PART QTY. MATERIAL 1B Upper Lock Latch 1 Stainless Steel 1C Latch Bolt 1 Stainless Steel 1 Handle (1/ - ) 1 Stainless Steel 1A Wrench (3 & ) 1 Cad Plate Carbon Steel 1B Wrench Block 1 Stainless Steel 1C Hex Head Bolt 1 Stainless Steel 1 Lock Washer 1 Stainless Steel 1 Handle Nut (1/ - ) 1 Stainless Steel 19 Body Bolts Stainless Steel Body Connector Bolts 1 Stainless Steel 0 Nuts Stainless Steel 1 Stop Pin 1 Stainless Steel (1/ -1/ ) Stainless Steel 1A Stopper 1 Stainless Steel Seat Retainer 1 Stainless Steel 3 Cryo Extension 1 Stainless Steel 31 Cryo Extension Bolts Stainless Steel 30 Bonnet Seal 1 TFM / TFE Cryo Extension Bushing 1 TFM

4 SERIES CD VALVE PARTS AND IDENTIFICATION 1/ - -1/ 3-1B 1C 1A 1C B A A 13 A º 90º º 90º A A PART NO. PART QTY. MATERIAL 1 Body 1 Stainless Steel 31 ASTM A31 CFM Pipe Ends 3 Stainless Steel 31L ASTM A31 CF3M Bronze ASTM B/B C300 3 Ball 1 Stainless Steel 31 Stem 1 Stainless Steel 31 / 1-PH Valve Seat PCTFE - KEL-F / Reinforced TFE Body Seal 3 TFM / TFE Thrust Bearing 1 Nova* A Stem Location Ring (3 & ) 1 Stainless Steel Thrust Bearing 1 PEEK A Thrust Bearing 1 Nova* 9 Stem Packing Nova* 9A Stem Packing 3 Nova* (3 & ) 10 Seal Protector 1 PEEK 11 Gland Packing 1 Stainless Steel 1 Belleville Washer Stainless Steel 13 Packing Nut 1 Stainless Steel 1 Lock Tab 1 Stainless Steel 1 Lower Lock Latch 1 Stainless Steel 1B Upper Lock Latch 1 Stainless Steel 1C Latch Bolt 1 Stainless Steel PART NO. PART QTY. MATERIAL 1 Handle (1/ - ) 1 Stainless Steel 1A Wrench (3 & ) 1 Cad Plate Carbon Steel 1B Wrench Block 1 Stainless Steel 1C Hex Head Bolt 1 Stainless Steel 1 Lock Washer 1 Stainless Steel 1 Handle Nut (1/ - ) 1 Stainless Steel 19 Body Bolts Stainless Steel Body Connector Bolts / Stainless Steel 0 Nuts Stainless Steel 0A Nuts 1 Stainless Steel 1 Stop Pin 1 Stainless Steel (1/ -1/ ) Stainless Steel 1A Stopper 1 Stainless Steel Seat 1 Stainless Steel Retainer 3 Cryo Extension 1 Stainless Steel 31 Cryo Extension Bolts Stainless Steel 30 Bonnet Seal 1 TFM / TFE Cryo Extension Bushing 1 TFM

5 SERIES C0 VALVE PARTS AND IDENTIFICATION CLASS 10 BLOW OUT PROOF STEM LOCKING DEVICE 1/ - 11B APPLICABLE STANDARDS Shell Wall Thickness ASME B 1.3 Face to Face Dimensions ASME B 1.10 Flange Dimensions ASME B 1. Tests ASME B 1.3 API 9 Basic Design API C 1-1/ - 11B 11A A A PART NO. PART QTY. MATERIAL 1 Body 1 Stainless Steel 31 ASTM A31 CFM End Connector 1 Stainless Steel 31 ASTM A31 CFM 3 Ball 1 Stainless Steel 31 Seat PCTFE - KEL-F / Reinforced TFE Body Seal 1 TFE Stem 1 Stainless Steel 31 / 1-PH Thrust Bearing Reinforced TFE Stem Packing 3/ Reinforced TFE 9 Gland Packing 1 30 Stainless Steel 10 Belleville Washer 30 Stainless Steel 11 Packing Nut 1 30 Stainless Steel 11A Lock Tab 1 Stainless Steel 11B Handle Nut 1 30 Stainless Steel 11C Lock Washer 1 30 Stainless Steel (1/ - ) 1 Stopper 1 30 Stainless Steel PART NO. PART QTY. MATERIAL 13 Handle 1 30 Stainless Steel (1/ - ) Galvanized Steel (-1/ - ) 13A Wrench Block 1 Stainless Steel 13B Hex Head Bolt 1 30 Stainless Steel 1 Locking Device 1 30 Stainless Steel (1/ - ) 1 Sleeve 1 Vinyl 1 Body Stud SEE* A193 BM N 1 Nut SEE* A19 BM N 0 Stop Pin (1/ - ) 1 30 Stainless Steel (-1/ - ) 30 Stainless Steel 1 Cryo Extension 1 Stainless Steel 31 Cryo Extension Bolts Stainless Steel 3 Bonnet Seal 1 TFM / TFE Cryo Extension Bushing 1 TFM *See Dimensions

6 SERIES C DIMENSIONS 1/ - -1/ SIZE A B C D E F G L M N Q R T V THRD. SW / BW 10# 300# 1/ / - UNF M / / - UNF M /1-0 UNF M / /1-0 UNF M / /1-1 UNF M /1-1 UNF M / M M FLOW COEFF. Cv APPROX. WEIGHT PORT SIZE R L 3 - N G D B A SIZE A B C D E F G L M N Q R T V THRD. SW / BW 10# 300# UNS M UNS M FLOW COEFF. Cv APPROX. WEIGHT PORT SIZE

7 SERIES C99 DIMENSIONS 1/ - 1-1/ SIZE A B C D E F G L M N Q R T V THRD. SW / BW 10# 300# 1/ / - UNF M / /1-0 UNF M /1-0 UNF M / /1-1 UNF M / /1-1 UNF M M M R FLOW COEFF. Cv APPROX. WEIGHT PORT SIZE L -1/ - 3 N G D B A SIZE A B C D E F G L M N Q R T V THRD. SW / BW 10# 300# -1/ UNS M UNS M FLOW COEFF. Cv APPROX. WEIGHT PORT SIZE

8 SERIES CD DIMENSIONS 1/ - -1/ 3 - SIZE A B C D E F G L M N Q R T V THRD. SW / BW 10# 300# 1/ / - UNF M. 0. 3/ / - UNF M /1-0 UNF M / /1-1 UNF M /1-1 UNF M / M M UNS M UNS M BOTTOM PORT CV* US GAL. GPM

9 SERIES C0 DIMENSIONS 1/ - -1/ - B B G C G C E F E F N 0.0 A D 0.0 A D SIZE A B C D E F CLASS 10# 300# 10# 300# 10# 300# 10# 300# 10# 300# 10# 300# 1/ / / / SIZE N G H I J K W CLASS 10# 300# 10# 300# 10# 300# 10# 300# 10# 300# 10# 300# 10# 300# 1/ /- UNF M M 3/ /- UNF M M /1-0 UNF M M 1-1/ /1-1 UNF M M /1-1 UNF M M -1/ M M10 M UNS M10 M UNS M10 M10

10 SERIES C0 DIMENSIONS 1/ - PERFORMANCE DATA APPROX. VALVE FLOW PORT SIZE COEFF. SIZE US GPM 1/.9 3/ / / Due to ongoing development of our product line, specifications subject to change without notice.

11 OPERATING DATA C/C99/CD PRESSURE TEMPERATURE DATA / --1/ C 1/ - C C0 SEAT PRESSURE TEMPERATURE DATA CL10# Maximum Pressure PSIG C -1/ -3 C99 KEL-F RTFE Maximum Pressure PSIG CL300# Kel-F RTFE BREAKAWAY TORQUE* SIZE C/CD C99 C0-10# C0-300# 1/ / / / / * BASED ON MAXIMUM LINE PRESSURE, AT MINIMUM TEMPERATURE.

12 HOW TO ORDER VALVE VALVE BODY, STEM SIZE SERIES & BALL ENDS SEATS SEALS ENDS OPTIONS 1/ C Standard Port = 31 Stainless Steel = 31L Stainless Steel K = KEL-F M = TFM IPS GO = Gear Operator 3/ C99 Full Port 1 = Bronze R= RTFE T = TFE TE = Threaded NB = Non Extended Bonnet** 1 TEB = Threaded BSPT SB = Special Extended Length 1-1/ R= BW = Butt Weld SCH,10,0,0 OH = Oval Handle 1-1/ SW = Socket Weld OH = Oval Handle 1 = 10# Flanged -1/ 3 = 300# Flanged 3 TUBE ENDS * IE = Instrumentation Ends ** Valves available without (*C Only) BE = Tube Buttweld Bonnet Extension, for intermittent BTE = Tube Extended Buttweld Cryogenic service. 3/ C K M TE FS HOW TO ORDER VALVE VALVE BODY, STEM ENDS BALL SIZE SERIES & BALL SIDE & BOTTOM SEATS SEALS ENDS CONFIGURATIONS OPTIONS T 1/ CD = 31 Stainless Steel = 31L Stainless Steel K = KEL-F M = TFM IPS P1 GO = Gear Operator 3/ (DIVERTERS) 1 = Bronze R = RTFE T = TFE TE = Threaded P NB = Non Extended Bonnet** 1 R= RTFE TEB = Threaded BSPT SB = Special Extended Length 1-1/ R= BW = Butt Weld OH = Oval Handle SCH,10,0,0 OH = Oval Handle -1/ SW = Socket Weld 3 1 = 10# Flanged 3 = 300# Flanged TUBE ENDS IE = Instrumentation Ends BE = Tube Buttweld ** Valves available without BTE = Tube Extended Bonnet Extension, for intermittent BButtweld Cryogenic service. 3/ CD K M TE P1 FS HOW TO ORDER VALVE VALVE SIZE SERIES CLASS ALLOY SEATS OPTIONS 1/ C0 11 = 10# = 31 Stainless Steel K = KEL-F GO = Gear Operator 3/ -1/ 33 = 300# K R = RTFE NB = Non Extended Bonnet** 1 3 SB = Special Extended Length 1-1/ R = OH = Oval HandleNB = 1-1/ ** Valves available without Bonnet Extension, for intermittent Cryogenic service. 3/ C0 11 K FS A Division of Smith-Cooper International, LLC Toll-Free 1--SHARPE () -3 Fax: (0) Garnet Drive Northlake, Illinois 01 U.S.A. Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaflet as required. Rev. 1/09 TFE is a registered trademark of Dyneon, LLC.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE Valves, Automation & Controls SERIES 7 HIGH PERFORANCE FLANGED STANDARD PORT BALL VALVE Fully Compliant API 608 5th Edition 50 300 FOR REFINING, CHEICAL & PETROCHEICAL PROCESSING Added Features Enhanced

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

MADE IN THE USA BALL VA LV ES

MADE IN THE USA BALL VA LV ES MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7

More information

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2" 4" Stainless or Carbon Steel.

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2 4 Stainless or Carbon Steel. Features Bolted body construction Investment cast body actuator mounting pad Direct mount Blow-out proof stem 4-seat design Adjustable, live loaded packing Secondary stem seal O-ring /" - " Extra deep

More information

E N G I N E E R E D V A L V E S GROVE. B4, B5 & B7 Side Entry Ball Valves GROVE

E N G I N E E R E D V A L V E S GROVE. B4, B5 & B7 Side Entry Ball Valves GROVE B4, B5 & B7 Side Entry Ball Valves TABLE OF CONTENTS B4, B5 & B7 SIDE ENTRY BALL VALVES FEATURES AND BENEFITS The Company 1 Applications 1 B4 Design Features 2 Material Specifications 4 Optional Features

More information

valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.

valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox. valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide: LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have

More information

Flanged and Butt-= Weld Type

Flanged and Butt-= Weld Type Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety

More information

Worcester Controls Three Piece Ball Valves

Worcester Controls Three Piece Ball Valves Worcester Controls Three Piece Ball Valves Series 44, Series 45, Series 59 Experience In Motion Series 44 Ball Valves A quantum advance in ball valve durability, cycle life, leak tightness and automation.

More information

Technical information

Technical information Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and

More information

BALL VALVES TECHNICAL CATALOGUE

BALL VALVES TECHNICAL CATALOGUE SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured

More information

Flowserve - Edward Valves Hermavalve A Zero Emission Valve from Edward Valves

Flowserve - Edward Valves Hermavalve A Zero Emission Valve from Edward Valves Flowserve - Edward Valves Hermavalve A Zero Emission Valve from Edward Valves Problem Small bore valves located in hard to reach areas of nuclear power plants that cannot be serviced if they leak radioactive

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS Model 222S (Galvanized receiver optional) AURORA 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS WWW.AURORAPUMP.COM AURORA 220 Series Single Stage Condensate and Boiler Feed Pumps 2 Introduction

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE MANUAL NUTRON BALL VALVE Model T3 ½ FP 4 RP 150# - 2500# ¼ FP 4 RP 1000 WOG 6000 WOG FLANGED, FNPT and WELD END For technical questions, please contact the following: Engineering

More information

VIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.

VIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635. Page 635.1 Issue B Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Model H8124A Operating 1: Series 8124A Nominal Flow Temp. 2 Viscosity (GPM) 15-200 (M 3 /hr.) 3.4-45 (PSI) (Bar) To 200 PSI To 14

More information

MP8000 Series Pneumatic Valve Actuators

MP8000 Series Pneumatic Valve Actuators 14-1161- 9, Rev. A Technical Bulletin MP8000 Issue Date March 2016 MP8000 Series Pneumatic Valve Actuators Pre-Assembly Details Page 3 MP8000 Actuator Components 3 Tools Required to Assemble an MP8000

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.korlokusa.com Kor-Lok USA Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54

More information

VAD. Variable Area Desuperheaters

VAD. Variable Area Desuperheaters Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated

More information

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE MANUAL NUTRON BALL VALVE MODEL B3 1 ½ FP 6 RP 150# - 2500# For technical questions, please contact the following: Engineering Department 2125-64 Avenue Edmonton, Alberta, Canada

More information

Authentic ITT Service Parts

Authentic ITT Service Parts Pure-Flo Authentic ITT Service Parts Providing our customers with a quality product has always been an integral part of how ITT does business. Building on this commitment your Authorized Distributor of

More information

ENGINEERED & PROCESS VALVES. Installation, Operation and Maintenance Manual GENERAL VALVE. Twin Seal Double Block and Bleed Plug Valve GENERAL VALVE

ENGINEERED & PROCESS VALVES. Installation, Operation and Maintenance Manual GENERAL VALVE. Twin Seal Double Block and Bleed Plug Valve GENERAL VALVE GENERAL VALVE Twin Seal Double Block and Bleed Plug Valve GENERAL VALVE 2 TABLE OF CONTENTS GENERAL VALVE TWIN SEAL Installation.... 4 Operation.... 5 Series 400, 800 & 900 Integral Bushing/Retained Ring

More information

The latest ASME/BPE guideline for valve and tubing

The latest ASME/BPE guideline for valve and tubing The latest ASME/BPE guideline for valve and tubing designs used in biotech and pharmaceutical applications provides process engineers with a reliable and measurable valve selection criteria. After years

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Installation, Operating and Maintenance Instructions 90/4.5.5 Rev. 0 Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Table of Contents SECTION I... 2 INSTALLATION...

More information

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The

More information

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1A FEBRUARY 2013 DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES DeZURIK KGC-HD (Heavy Duty) Cast Stainless Steel Knife Gate Valves Applications DeZURIK KGC-HD Cast Stainless

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

American- Darling 5¼" B-84-B-5.

American- Darling 5¼ B-84-B-5. -5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which

More information

DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT

DeZURIK 3-20 BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.

More information

Materials of Construction. NACE Compliance. Emergency Sealant Injection. Anti-Blowout. Features

Materials of Construction. NACE Compliance. Emergency Sealant Injection. Anti-Blowout. Features Materials of Construction PBV manufactures trunnion ball valves using a full range of carbon, alloy and stainless materials. Our commodity valves are manufactured using dual rated A105/A350 LF2 steel,

More information

ball valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves

ball valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves

More information

BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120

BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120 An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,

More information

Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com

Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120

BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120 An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,

More information

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges Piston Valves Il futuro come tradizione BONETTI Our tradition is the future BONETTI PISTON VALVES BONETTI SERIES GENERAL INFORMATION Seat tightness in a piston valve is obtained by a cylindrically shaped

More information

Safety and Operation Rx 30, 50, 70

Safety and Operation Rx 30, 50, 70 Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments

More information

Confidence with the global standard in pressure relief devices

Confidence with the global standard in pressure relief devices QUALITROL LPRD Large pressure relief devices Confidence with the global standard in pressure relief devices Robust design and materials provide reliable protection and long life Widest array of options

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the

More information

Know-how makes the difference. Ball Valves

Know-how makes the difference. Ball Valves Know-how makes the difference Ball Valves With Dansk Ventil Center as your business partner, you are always guaranteed a wide and well sorted product range and a unique technical know-how V Product development

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.

More information

VAD Variable Area Desuperheaters

VAD Variable Area Desuperheaters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS

2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV

More information

V47 Series Temperature Actuated Modulating Water Valves

V47 Series Temperature Actuated Modulating Water Valves V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate

More information

400 SERIES. Needle Valves Standard, Hard Seat

400 SERIES. Needle Valves Standard, Hard Seat Needle Valves Standard, Hard Seat 400 SERIES 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary

More information

DOUBLE BLOCK AND BLEED VALVES

DOUBLE BLOCK AND BLEED VALVES DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance

More information

Baumann 87000 Flexsleev Sanitary Control Valve

Baumann 87000 Flexsleev Sanitary Control Valve Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found

More information

needle valves Needle Valves Index At a Glance Series 5

needle valves Needle Valves Index At a Glance Series 5 Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

Shut-off & Lockout Valves 1/4" to 1-1/2" port size

Shut-off & Lockout Valves 1/4 to 1-1/2 port size Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve Instruction Manual CV500 Valve Fisher CV500 Rotary Globe Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 3 Maintenance...

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE

NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed

More information

Metal Seated Ball Valves

Metal Seated Ball Valves Tech Bulletin Page 130-11 Metal ed Ball Valves Engineered Valves for Severe Service Reliability with Innovative Process Solutions Severe Series Extreme Series Shut-Off Class IV, V & VI Automated Metal

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

PBM has solutions for your valve application.

PBM has solutions for your valve application. valve solutions i n d u s t r i a l v a l v e s Whether the application is in a chemical plant, paper mill, food plant, manufacturing environment, or other industrial setting, PBM S line of Industrial

More information

PLUMBING RE-SUBMITTAL 22 11 17

PLUMBING RE-SUBMITTAL 22 11 17 PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI

Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI Certifications and tests Cryogenic test Firesafe test Final inspection Certificates of the company ISO 9001 AD-Merkblatt WO/TRD 100 Quality

More information

needle valves Needle Valves Index At a Glance 1

needle valves Needle Valves Index At a Glance 1 Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

Memoryseal Resilient-seated ball valves

Memoryseal Resilient-seated ball valves Memoryseal Resilient-seated ball valves ASME classes: 0 00 Sizes: NPS ¼ 4 (DN 00) WOG: 00 00 VELAN S PROFILE VELAN AT A GLANCE History Founded in 90 Sales Over $00 million People Over,000 employees Product

More information

Baumann 81000 Mikroseal Control Valve

Baumann 81000 Mikroseal Control Valve Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

The new VKD Ball Valve with Dual Block Technology. Dares to be different

The new VKD Ball Valve with Dual Block Technology. Dares to be different The new VKD Ball Valve with Dual Block Technology Dares to be different VKDUALBLOCK Durapipe are pleased to introduce the new VK Dual Block ball valve developed by FIP providing an advanced standard in

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

DIMENSIONAL BOLTING CATALOG

DIMENSIONAL BOLTING CATALOG DIMENSIONAL BOLTING CATALOG DIMENSIONAL CATALOG Table of Contents Page Screws Round Head Screws 1-1 Various Head Styles Machine Scerws 1-2 to 1-23 Tapping Screws (Approx. Hole Sizes) 1-24 Thumb and Wing

More information