ZL10AVR. Versatile Evaluation Board for AVR Microcontrollers

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "ZL10AVR. Versatile Evaluation Board for AVR Microcontrollers"

Transcription

1 ZL10AVR Versatile Evaluation Board for AVR Microcontrollers Thank you for buying ZL10AVR evaluation board. We hope that the power and quality of our tool allow you to appreciate the advantages of AVR microcontrollers (AT90S, ATmega and ATtiny families). ver. 3.0

2 Introduction ZL10AVR is a versatile evaluation board designed for engineers and hobbyists who want to prototype systems based on AVR microcontrollers (AT90S, ATmega and ATtiny families in DIP8, DIP20, DIP28 and DIP40 packages). ZL10AVR is equipped with 7 DIP sockets suitable for most of AVR family microcontrollers. LEDs mounted near sockets indicate socket suitable for selected microcontroller. Developer has access to all microcontroller pins (only one microcontroller can be installed at the same time!), which are brought to gold-pin connectors. Board's configuration is complete and user can find on the board all of the following components: USB interface connector (for ZL1USB module), analog potentiometer, 8 MHz crystal oscillator, 4 LED displays, buzzer, RS232 interface with DB9F connector, 4x4 LED matrix, configurable keyboard (1x4 or 4x4 buttons), 8 LEDs, RC5 infrared receiver with TTL output, ISP connector and socket for LCD display (2x16 characters). Thanks to simple PLD logic (from Xilinx) incorporated on the board, most of integrated peripherals can be easy and comfortably connected to any port (PORTA, PORTB, PORTC or PORTD) available in microcontroller used in the application. The gold-pin headers provide access to easy connection of matrix keyboard and matrix display. Complete power supply integrated on ZL10AVR board eliminates the need for an external regulated power supply. ZL10AVR board comes with examples of Bascom programs. Features Compatible with most of AVR family microcontrollers (AT90S, ATmega, ATtiny families) RS232 interface (with level converter and DB9F connector) 4-digit, 7-segment, multiplexed LED common cathode display Socket for LCD 2 x16 character display (LCD1602 module) 8 LEDs 16 LEDs configured as 4x4 matrix Configurable microswitch 4x4 or 4x1 keyboard Integrated infrared RC5 receiver with TTL output Buzzer Socket for USB interface (ZL1USB_A module) ISP Kanda STK200 compatible connector (recommended ISP programmer: ZL2PRG) Analog potentiometer Reset pulse generator Integrated regulated power supply Supply 9 VDC/250 ma Built-in 3,3 V voltage regulator Easy access to regulated +3,3 V and +5 V power supply for external devices Supported microcontrollers Devices supported by ZL10AVR: AT90: AT90S1200, AT90S2313, AT90S2323, AT90S2343 ATtiny: ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny25, ATtiny26, ATtiny45, ATtiny85, ATtiny2313 ATmega: ATmega8, ATmega16, ATmega32, ATmega48, ATmega88, ATmega161, ATmega162, ATmega163, ATmega164, ATmega168, ATmega323, ATmega324, ATmega644, ATmega8515, ATmega8535 ZL10AVR board is compatible with most of new AVR microcontrollers in DIP8/20/28 and DIP40 packages. Contents of the package Code Description ZL10AVR ZL10AVR board (without microcontrollers and LCD display) 1 pcs. CD with documentation, software and Bascom examples 1 pcs. Technical assistance For technical assistance, please contact Please provide the following data: Version of the operating system Microcontroller type used in your system and its oscillator frequency Detailed description of the problem BTC Korporacja Warsaw, Poland ul. Inowlodzka Disclaimer BTC Korporacja makes no warranty for the use of its products and assumes no responsibility for any errors which may appear in this document nor does it make a commitment to update the information contained herein. BTC Korporacja products are not intended for use in medical, life saving or life sustaining applications. BTC Korporacja retains the right to make changes to these specifications at any time, without notice. All product names referenced herein are trademarks of their respective companies.

3 3 Contents Board configuration...4 Board layout...5 Microcontroller configuration segment LED display...10 LEDs...12 Alphanumeric LCD display...13 Analog potentiometer...14 Buzzer...15 RS232/USB interface...16 IR receiver...18 Matrix LED display...19 Microswitch keyboard...20 I/O headers...21 ISP connector...22 Schematics...23

4 4 Board configuration Block schematic of ZL10AVR board is shown below. Logic module integrated in CPLD works as a multiple switch simplifying connections between microcontroller s ports and 7-segment multiplexed display, 8 LEDs and ISP connector. Peripherals like: crystal resonator, potentiometer, buzzer, IR receiver, RS232 interface, USB interface can be connected/disconnected to/from microcontroller with few dedicated jumpers. Only one microcontroller at the time can be used with ZL10AVR board! Block schematic of ZL10AVR board

5 5 Board layout

6 6 Microcontroller configuration Active socket is selected by jumper mounted on JP21 switch. JP21 closed pins Active sockets 1-2 U4 2-3 U2, U3, U5, U6 3-4 U1, U7 Active (selected) socket is indicated by LED. Microcontrollers that can be used with specific sockets are shown below. Socket Microcontroller U1 ATtiny 26 U2 ATmega 32, ATmega 323, ATmega 16, ATmega 163, ATmega 8535, ATmega 164, ATmega 324, ATmega 644 U3 ATmega 8515, ATmega 161, ATmega 162 U4 ATmega 8, ATmega 48, ATmega 88, ATmega 168 U5 ATtiny 2313 U6 AT90S1200, AT90S2313 U7 ATtiny 11, ATtiny 12, ATtiny 13, ATtiny 15, ATtiny 25, ATtiny 45, ATtiny 85, AT90S2323, AT90S2343 Note! ATtiny 11/15 are not ISP programmable.

7 7

8 8 Crystal oscillator can be disconnected from X1 and X2 pins in U1, U4 and U5 sockets. Recommended configurations of jumpers JP9, JP10 (U1 socket), JP2, JP3 (U5 socket) and JP5, JP6 (U4 socket) are shown below. Jumpers ascribed to U1 crystal pins JP9 closed pins JP10 closed pins Crystal X connected to X1 i X2 of U3 socket disconnected Not allowed Not allowed Jumpers ascribed to U4 crystal pins JP5 closed pins JP6 closed pins Crystal X connected to X1 i X2 of U6 socket disconnected Not allowed Not allowed Jumpers ascribed to U5 crystal pins JP2 closed pins JP3 closed pins Crystal X connected to X1 i X2 of U2 socket disconnected Not allowed Not allowed Jumpers JP1 (socket U7), JP4 (socket U5), JP7 (socket U4) and JP11 (socket U1) are used to connect microcontroller RESET input to reset signal generator (U10), manual reset button S1 and RESET signal generated by ISP programmer. Recommended configurations of these jumpers are shown below. Configurations of JP1 JP1 closed pins External (global) RESET signal 1-2 connected to U7 2-3 disconnected from U7 Configurations of JP4 JP4 closed pins External (global) RESET signal 1-2 connected to U5 2-3 disconnected from U5 Configurations of JP7 JP7 closed pins External (global) RESET signal 1-2 connected to U4 2-3 disconnected from U4 Configurations of JP11 JP11 closed pins External (global) RESET signal 1-2 connected to U1 2-3 disconnected from U1 Only one (active) socket can be connected to crystal generator and global RESET signal. In other case microcontroller will work incorrectly!

9 9 Examples of board configurations ATmega32, external resonator Microcontroller in U2 socket. Jumpers configuration: JP21 (SOCKET) 2-3 (U2/3/5/6) JP11 (U1 GRES) 2-3 (Off) JP9 (U1 CRYST) 2-3 (Off) JP10 (U1 CRYST) 2-3 (Off) JP5 (U4 CRYST) 2-3 (Off) JP6 (U4 CRYST) 2-3 (Off) JP7 (U4 GRES) 2-3 (Off) JP2 (U5 CRYST) 2-3 (Off) JP3 (U5 CRYST) 2-3 (Off) JP4 (U5 GRES) 2-3 (Off) JP1 (U7 GRES) 2-3 (Off) ATtiny2313, external resonator Microcontroller in U5 socket. Jumpers configuration: JP21 (SOCKET) 2-3 (U2/3/5/6) JP11 (U1 GRES) 2-3 (Off) JP9 (U1 CRYST) 2-3 (Off) JP10 (U1 CRYST) 2-3 (Off) JP5 (U4 CRYST) 2-3 (Off) JP6 (U4 CRYST) 2-3 (Off) JP7 (U4 GRES) 2-3 (Off) JP2 (U5 CRYST) 1-2 (On) JP3 (U5 CRYST) 1-2 (On) JP4 (U5 GRES) 1-2 (On) JP1 (U7 GRES) 2-3 (Off) ATtiny2313, internal oscillator Microcontroller in U5 socket. Jumpers configuration: JP21 (SOCKET) 2-3 (U2/3/5/6) JP11 (U1 GRES) 2-3 (Off) JP9 (U1 CRYST) 2-3 (Off) JP10 (U1 CRYST) 2-3 (Off) JP5 (U4 CRYST) 2-3 (Off) JP6 (U4 CRYST) 2-3 (Off) JP7 (U4 GRES) 2-3 (Off) JP2 (U5 CRYST) 2-3 (Off) JP3 (U5 CRYST) 2-3 (Off) JP4 (U5 GRES) 1-2 (On) JP1 (U7 GRES) 2-3 (Off) ATmega8, external resonator Microcontroller in U4 socket. Jumpers configuration: JP21 (SOCKET) 1-2 (U4) JP11 (U1 GRES) 2-3 (Off) JP9 (U1 CRYST) 2-3 (Off) JP10 (U1 CRYST) 2-3 (Off) JP5 (U4 CRYST) 1-2 (On) JP6 (U4 CRYST) 1-2 (On) JP7 (U4 GRES) 1-2 (On) JP2 (U5 CRYST) 2-3 (Off) JP3 (U5 CRYST) 2-3 (Off) JP4 (U5 GRES) 2-3 (Off) JP1 (U7 GRES) 2-3 (Off)

10 10 7-segment LED display Segments of LED displays can be controlled by one of four microcontroller I/O ports (8 lines each): PORTA, PORTB, PORTC or PORTD. Active port is selected by JP17 (LED_DSP) simultaneously with display s cathodes drivers. Cathodes are controlled by 4 LSB lines of PORTA, PORTB, PORTC or PORTD. LED displays port selection (JP17 - LED_DSP) JP17 closed pins Segments controlled by Cathodes controlled by (MSD LSD) 1-2 PA PB(3 0) 2-3 PB PC(3 0) 3-4 PC PD(3...0) 4-5 PD PA(3...0) Displays segments are connected to I/O port lines as shown below. Connection of LED diplays segments Displays segment A B C D E F G DP I/O line (x=a/b/c/d) Px0 Px1 Px2 Px3 Px4 Px5 Px6 Px7 DIP-switch S2 selects number of active displays (non-active displays can be switched-off).

11 11

12 12 LEDs LEDs can be connected to one of four ports: PORTA, PORTB, PORTC or PORTD. Active port is selected by JP22. LEDs port selector (JP22) JP22 closed pins LEDs controlled by 1-2 PA 2-3 PB 3-4 PC 4-5 PD

13 13 Alphanumeric LCD display Standard LCD display with HD44780 compatible controller (LCD1602 module) can be mounted in W1 socket. Connections between microcontroller and display module lines are show below. Connections between microcontroller and display module LCD module signal name LCD module pin AVR I/O lines RS 4 PB0 RW 5 PB1 E 6 PB2 D0 7 PD0 D1 8 PD1 D2 9 PD2 D3 10 PD3 D4 11 PD4 D5 12 PD5 D6 13 PD6 D7 14 PD7

14 14 Analog potentiometer ZL10AVR board is equipped with analog potentiometer R8 allowing to regulate voltage form 0 up to +5 V. Potentiometer can be connected to analog input on line PA0 or PC0 as shown below. Analog potentiometer configurations JP24 closed pins JP25 closed pins * Potentiometer R disconnected connected to PA disconnected connected to PC0 * There is an error on Top Overlay: potentiometer R8 is disconnected, when jumper JP25 is in position On (closed pins 1-2). Potentiometer R8 is connected, when jumper JP25 is in position Off (closed pins 2-3).

15 15 Buzzer Buzzer Gl1 can be connected to PB0 line. Jumper JP23 (SPEAKER) disconnects buzzer. Buzzer connection JP23 closed pins Gl1 1-2 (On) connected to PB0 2-3 (Off) disconnected

16 16 RS232/USB interface ZL10AVR board is equipped with: DB9F connector connected to MAX232-compatible voltage converter (RS232 interface), JP15 socket for USB2RS232 interface module (recommended type is ZL1USB). Serial interfaces are configured by JP8, JP12, JP13 and JP14 jumpers. Serial ports configurations JP8 closed pins JP12 closed pins Selected JP13 closed pins JP14 closed pins TxD RxD Configuration disconnected disconnected channel RxD RS232 channel RxD USB channel TxD RS232 channel TxD USB RS232 (TxD and RxD) USB (TxD and RxD) Note! Yellow colour marks recommended jumper positions. Serial interface disconnected disconnected connected to PD disconnected connected to PD connected to PD1 disconnected connected to PD1 disconnected connected to PD1 connected to PD connected to PD1 connected to PD0 RS232 interface connected to microcontroler USB2RS232 interface connected to microcontroler

17 17

18 18 IR receiver ZL10AVR board is equipped with TFMS5360 (U12) IR receiver. Possible connections of its output are shown below. Configurations of JP19 and JP20 JP19 closed pins JP20 closed pins IR receiver output connected to PD connected to PB6 2-3 disconnected

19 19 Matrix LED display Matrix (4x4 LEDs) LED display mounted on the ZL10AVR is connected to I/O port with 16 wires IDC ribbon cable. Connections of rows and columns of LEDs matrix is shown belowe. Kamami recommends to use only one LED in each row at the time, to avoid lumination intensity modulation.

20 20 Microswitch keyboard ZL10AVR board is equipped with 16 microswitches connected as 4x4 matrix or simple 4x1 keyboard (with 0 logic level active). Keyboard can be connected to any accesible I/O microcontroller port with IDC ribbon cable (ZL5 gold-pin header). Configurations of JP26 JP26 closed pins Keyboard configuration is 1-2 simply 4 x 1 switches 2-3 matrix 4 x 4

21 21 I/O headers

22 22 ISP connector Signal connection in ISP connector (JP16, Kanda STK200 compatible) is shown below. Kamami recommends to use ZL2PRG ISP programmer. ISP connector pins

23 Schematics 23

24 24

ET-BASE AVR ATmega64/128

ET-BASE AVR ATmega64/128 ET-BASE AVR ATmega64/128 ET-BASE AVR ATmega64/128 which is a Board Microcontroller AVR family from ATMEL uses MCU No.ATmega64 and ATmega128 64PIN. Board ET-BASE AVR ATmega64/128 uses MCU s resources on

More information

AVR ATmega8 Development Board

AVR ATmega8 Development Board AVR ATmega8 Development Board Campus Component Pvt. Ltd. DISCLAIMER Information furnished is believed to be accurate and reliable at the time of publication. However, Campus Component Pvt. Ltd. assumes

More information

EasyPIC4 User s Manual

EasyPIC4 User s Manual SOFTWARE AND HARDWARE SOLUTIONS FOR THE EMBEDDED WORLD MikroElektronika - Books - Compilers User s Manual PIC MICROCHIP DEVELOPMENT BOARD 3in1 mikro IN-CIRCUIT DEBUGGER USB 2.0 IN-CIRCUIT PROGRAMMER With

More information

EvB 5.1 v5 User s Guide

EvB 5.1 v5 User s Guide EvB 5.1 v5 User s Guide Page 1 Contents Introduction... 4 The EvB 5.1 v5 kit... 5 Power supply...6 Programmer s connector...7 USB Port... 8 RS485 Port...9 LED's...10 Pushbuttons... 11 Potentiometers and

More information

Interfacing a Servo to the ATmega16

Interfacing a Servo to the ATmega16 Learning Objectives: Interfacing a Servo to the ATmega16 After successfully completing this lab, students will be able to: Desribe how a radio control (RC) servo works Interface a RC servo to a microcontroller

More information

STK500... User Guide

STK500... User Guide STK500... User Guide Table of Contents Section 1 Introduction... 1-1 1.1 Starter Kit Features...1-1 1.2 Device Support...1-2 Section 2 Getting Started... 2-1 2.1 Unpacking the System...2-1 2.2 System

More information

1-800-831-4242

1-800-831-4242 Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. SSA-485 Smart Serial Adapter Serial Converter / Stand-alone host controller

More information

Programming Device Manual Booklet AVR Prog USB v2

Programming Device Manual Booklet AVR Prog USB v2 Programming Device Manual Booklet AVR Prog USB v2 Programming device manual booklet: AVR Prog USB v2, STK500 v2 www.and-tech.pl Page 1 Content 1. Installation...3 2. HID mode drivers installation....3

More information

Making Programmer and Basic target.

Making Programmer and Basic target. Making Programmer and Basic target. AVR Tutorial Series. www.extremeelectronics.co.in PART 3 Now u know what tools are required for MCU based development. And you are familiar with their uses. Now time

More information

M68EVB908QL4 Development Board for Motorola MC68HC908QL4

M68EVB908QL4 Development Board for Motorola MC68HC908QL4 M68EVB908QL4 Development Board for Motorola MC68HC908QL4! Axiom Manufacturing 2813 Industrial Lane Garland, TX 75041 Email: Sales@axman.com Web: http://www.axman.com! CONTENTS CAUTIONARY NOTES...3 TERMINOLOGY...3

More information

DSO138 oscilloscope program upgrade method

DSO138 oscilloscope program upgrade method DSO138 oscilloscope program upgrade method Applicable models: 13801K, 13802K Program upgrade Principle The DSO138 is a SCM STM32F103C8 internal oscilloscope that is preinstalled with a flash bootloader,

More information

Software High Level Design Specification

Software High Level Design Specification Single-Phase Energy Meter Reference Platform Software High Level Design Specification Ver1.0 Note: This document may subject to change by Renesas Technology Singapore without prior notice. This is to record

More information

The Programming Interface

The Programming Interface : In-System Programming Features Program any AVR MCU In-System Reprogram both data Flash and parameter EEPROM memories Eliminate sockets Simple -wire SPI programming interface Introduction In-System programming

More information

1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description...

1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... dspic / PIC24 Multiprogrammer datasheet EB064-00 00-1 Contents 1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 6 Appendix

More information

HC(S)08-System for Development and Training

HC(S)08-System for Development and Training SYSTECH J.Schnyder GmbH Schliefweg 30 CH-4106 Therwil Telefon 091 827 15 87 www.systech.ch HC(S)08-System for Development and Training Overview V 0.3 (Draft English) Contents Components... 3 Hardware...

More information

AC-PG-USBASP USBASP AVR Programmer

AC-PG-USBASP USBASP AVR Programmer AC-PG-USBASP-UG TABLE OF CONTENTS 1. OVERVIEW... 1 1.1. Introduction... 1 1.2. References... 1 1.2.1. Referenced Web Pages... 1 1.2.2. Acronyms and Abbreviations... 1 1.3. Supported Microcontrollers...

More information

Microcontroller. BV514 32bit Microcontroller. Product specification. March 2012 V0.a. ByVac Page 1 of 7

Microcontroller. BV514 32bit Microcontroller. Product specification. March 2012 V0.a. ByVac Page 1 of 7 32bit Product specification March 2012 V0.a ByVac Page 1 of 7 Contents 1. Introduction...3 2. Features...3 3. Physical Specification...3 3.1....3 3.2. PIC32...3 3.3. USB Interface...3 3.4. Power Supply...4

More information

Ocean Controls KTA-223 Arduino Compatible USB Relay Controller

Ocean Controls KTA-223 Arduino Compatible USB Relay Controller Ocean Controls - KTA-223 12/11/2009 Ocean Controls KTA-223 Arduino Compatible USB Relay Controller 8 Relay Outputs 5A 250VAC 4 Opto-Isolated Inputs 5-30VDC 3 Analog Inputs (10 bit) Connections via Pluggable

More information

RC2200DK Demonstration Kit User Manual

RC2200DK Demonstration Kit User Manual Demonstration Kit User Manual Table of contents TABLE OF CONTENTS... 1 QUICK INTRODUCTION... 2 INTRODUCTION... 3 DEMONSTRATION BOARD... 4 POWER SUPPLY SECTION... 5 RS-232 INTERFACE... 6 CONNECTORS... 7

More information

Lab Experiment 1: The LPC 2148 Education Board

Lab Experiment 1: The LPC 2148 Education Board Lab Experiment 1: The LPC 2148 Education Board 1 Introduction The aim of this course ECE 425L is to help you understand and utilize the functionalities of ARM7TDMI LPC2148 microcontroller. To do that,

More information

Data Acquisition Module with I2C interface «I2C-FLEXEL» User s Guide

Data Acquisition Module with I2C interface «I2C-FLEXEL» User s Guide Data Acquisition Module with I2C interface «I2C-FLEXEL» User s Guide Sensors LCD Real Time Clock/ Calendar DC Motors Buzzer LED dimming Relay control I2C-FLEXEL PS2 Keyboards Servo Motors IR Remote Control

More information

revolution Contents: Introduction Power 28-pin Project Board with input/output cables

revolution Contents: Introduction Power 28-pin Project Board with input/output cables 28-PIN IN IN PROJECT BOARD Contents: AXE020 28-pin Project Board with input/output cables Introduction The 28-pin project board is designed to allow rapid prototyping with 28-pin PICAXE microcontrollers.

More information

ISP Target System Header Selection for AVR & AT89S FLASH Microcontrollers

ISP Target System Header Selection for AVR & AT89S FLASH Microcontrollers ISP Header Selection for AVR & AT8S FLASH s.0 verview This application note details the possible connection methods between a and when implementing in-system programming (ISP) of Atmel AVR and AT8S FLASH

More information

The modular concept of the MPA-3 system is designed to enable easy accommodation to a huge variety of experimental requirements.

The modular concept of the MPA-3 system is designed to enable easy accommodation to a huge variety of experimental requirements. HARDWARE DESCRIPTION The modular concept of the MPA-3 system is designed to enable easy accommodation to a huge variety of experimental requirements. BASE MODULE GO LINE Digital I/O 8 Analog Out AUX 1

More information

Android Controlled Based Interface

Android Controlled Based Interface Android Controlled Based Interface Objective Fix Foba Build Rofi (Fifth Generation Robot) Develop, Build, and Implement a Dynamic Balanced Biped Robot Table of Contents Objective... 1 Android Controlled

More information

AUTOMATIC NIGHT LAMP WITH MORNING ALARM USING MICROPROCESSOR

AUTOMATIC NIGHT LAMP WITH MORNING ALARM USING MICROPROCESSOR AUTOMATIC NIGHT LAMP WITH MORNING ALARM USING MICROPROCESSOR INTRODUCTION This Project "Automatic Night Lamp with Morning Alarm" was developed using Microprocessor. It is the Heart of the system. The sensors

More information

Microcontroller Based Low Cost Portable PC Mouse and Keyboard Tester

Microcontroller Based Low Cost Portable PC Mouse and Keyboard Tester Leonardo Journal of Sciences ISSN 1583-0233 Issue 20, January-June 2012 p. 31-36 Microcontroller Based Low Cost Portable PC Mouse and Keyboard Tester Ganesh Sunil NHIVEKAR *, and Ravidra Ramchandra MUDHOLKAR

More information

User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK

User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK Because Arduino that is the development project on AVR MCU as Open Source has been published, it is popular and widespread shortly.

More information

Introducing AVR Dragon

Introducing AVR Dragon Introducing AVR Dragon ' Front Side Back Side With the AVR Dragon, Atmel has set a new standard for low cost development tools. AVR Dragon supports all programming modes for the Atmel AVR device family.

More information

KTA-223 Arduino Compatible Relay Controller

KTA-223 Arduino Compatible Relay Controller 8 Relay Outputs 5A 250VAC 4 Opto-Isolated Inputs 5-30VDC 3 Analog Inputs (10 bit) Connections via Pluggable Screw Terminals 0-5V or 0-20mA Analog Inputs, Jumper Selectable 5A Relay Switching Power Indicator

More information

USB to RS-422/485 Serial Adapter

USB to RS-422/485 Serial Adapter USB to RS-422/485 Serial Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2

More information

KTA-225 Arduino Compatible Relay Controller v3

KTA-225 Arduino Compatible Relay Controller v3 8 Relay Outputs 5 A 250 VAC 8 Analog Inputs (10 bit) Connections via Pluggable Screw Terminals 0 to 5 V, 0 to 3.3 V or 0 to 20 ma Analog Inputs, Jumper Selectable 5 A Relay Switching Power Indicator LED

More information

GSM Interfacing Board

GSM Interfacing Board Campus Component Pvt. Ltd. DISCLAIMER Information furnished is believed to be accurate and reliable at the time of publication. However, Campus Component Pvt. Ltd. assumes no responsibility arising from

More information

EECS 100/43 Lab 8 Introduction to the PIC Microcontroller

EECS 100/43 Lab 8 Introduction to the PIC Microcontroller EECS 100/43 Lab 8 Introduction to the PIC Microcontroller 1. Objective In this lab, you will learn about how to use your PIC Microcontroller. This lab is the first lab for the digital component of the

More information

PICNet 1. PICNet 1 PIC18 Network & SD/MMC Development Board. Features. Applications. Description

PICNet 1. PICNet 1 PIC18 Network & SD/MMC Development Board. Features. Applications. Description Features PICNet 1 PIC18 Network & SD/MMC Development Board IC Sockets for 28 or 40-pin Microchip PIC18F Microcontrollers IC Socket for 8-pin serial EEPROM Multiple MCU Oscillator sources Full 10BaseT IEEE

More information

Flash Microcontrollers. Application Note. Using the STK500 as an AT89C51Rx2 Target Board

Flash Microcontrollers. Application Note. Using the STK500 as an AT89C51Rx2 Target Board Using the STK500 as an AT89C51Rx2 Target Board Features Use of STK 500 as a Development Board for 80C51 Microcontrollers Supports AT89C51Rx2, T89C51AC2, T89C51CC01, and Similar Devices Uses an Additional

More information

Getting Started with C Programming for the ATMEL AVR Microcontrollers

Getting Started with C Programming for the ATMEL AVR Microcontrollers Getting Started with C Programming for the ATMEL AVR Microcontrollers By Son Lam Phung Version 2.0 Latest version of this document is available at: http://www.elec.uow.edu.au/avr Son Lam Phung, 2008-2015.

More information

Bluetooth HC-06 with serial port module Easy guide

Bluetooth HC-06 with serial port module Easy guide 1 Bluetooth HC-06 with serial port module Easy guide This manual consists of 3 parts: PART 1. Overview of Bluetooth HC-06 module with serial port. PART 2. Installing Bluetooth HC-06 module with Bolt 18F2550

More information

ontap Series 4000 with ProScan

ontap Series 4000 with ProScan ontap Series 4000 with ProScan Boundary Scan Test Software ontap HighSpeed USB JTAG Test & Programming Cable Installation and Setup Instructions ontap Series 4000 with ProScan Boundary Scan Test Software

More information

DX4010V2. Installation Instructions. RS-232/USB Serial Interface Module

DX4010V2. Installation Instructions. RS-232/USB Serial Interface Module DX4010V2 EN Installation Instructions RS-232/USB Serial Interface Module DX4010V2 Installation Instructions Trademarks Trademarks BlackBox is either a registered trademark or a trademark of BlackBox Corporation

More information

LiveDesign Evaluation Board Technical Reference Manual. Technical reference manual for Altium s LiveDesign Evaluation Boards

LiveDesign Evaluation Board Technical Reference Manual. Technical reference manual for Altium s LiveDesign Evaluation Boards LiveDesign Evaluation Board Technical Reference Manual Technical reference manual for Altium s LiveDesign Evaluation Boards CAUTION THIS EQUIPMENT INCLUDES EXPOSED ELECTRONIC COMPONENTS THAT ARE HIGHLY

More information

PCAN-MicroMod Evaluation Test and Development Environment for the PCAN-MicroMod. User Manual. Document version 2.0.1 (2013-08-06)

PCAN-MicroMod Evaluation Test and Development Environment for the PCAN-MicroMod. User Manual. Document version 2.0.1 (2013-08-06) PCAN-MicroMod Evaluation Test and Development Environment for the PCAN-MicroMod User Manual Document version.0. (0-0-0) Products taken into account Product Name Part number Model PCAN-MicroMod Evaluation

More information

Accurate Measurement of the Mains Electricity Frequency

Accurate Measurement of the Mains Electricity Frequency Accurate Measurement of the Mains Electricity Frequency Dogan Ibrahim Near East University, Faculty of Engineering, Lefkosa, TRNC dogan@neu.edu.tr Abstract The frequency of the mains electricity supply

More information

Switch board datasheet EB007-00-1

Switch board datasheet EB007-00-1 Switch board datasheet EB007-00-1 Contents 1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 6 Appendix 1 Circuit diagram

More information

DK40 Datasheet & Hardware manual Version 2

DK40 Datasheet & Hardware manual Version 2 DK40 Datasheet & Hardware manual Version 2 IPC@CHIP DK40 Evaluation module Beck IPC GmbH http://www.bcl.de page 1 of 11 Table of contents Table of contents... 2 Basic description... 3 Characteristics...

More information

DKWF121 WF121-A 802.11 B/G/N MODULE EVALUATION BOARD

DKWF121 WF121-A 802.11 B/G/N MODULE EVALUATION BOARD DKWF121 WF121-A 802.11 B/G/N MODULE EVALUATION BOARD PRELIMINARY DATA SHEET Wednesday, 16 May 2012 Version 0.5 Copyright 2000-2012 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes

More information

FlowKit in-circuit debug system

FlowKit in-circuit debug system FlowKit in-circuit debug system www.matrixmultimedia.com HP299 Contents About this document 3 Board layout 3 General information 4 Detailed operation 4 Circuit diagram 7 2 Copyright About this document

More information

PCAN-MicroMod Universal I/O Module with CAN Interface. User Manual. Document version 2.1.0 (2014-01-16)

PCAN-MicroMod Universal I/O Module with CAN Interface. User Manual. Document version 2.1.0 (2014-01-16) PCAN-MicroMod Universal I/O Module with CAN Interface User Manual Document version 2.1.0 (2014-01-16) Products taken into account Product Name Part number Model PCAN-MicroMod IPEH-002080 with firmware

More information

Advanced Data Capture and Control Systems

Advanced Data Capture and Control Systems Advanced Data Capture and Control Systems Tronisoft Limited Email: sales@tronisoft.com Web: www.tronisoft.com RS232 To 3.3V TTL User Guide RS232 to 3.3V TTL Signal Converter Modules P/N: 9651 Document

More information

WIZ-Embedded WebServer User s Manual (Ver. 1.0)

WIZ-Embedded WebServer User s Manual (Ver. 1.0) [텍스트 입력] WIZ-Embedded WebServer User s Manual (Ver. 1.0) 2007 WIZnet Inc. All Rights Reserved. For more information, visit our website at www.wiznet.co.kr Document History Information Revision Data Description

More information

PICmicro tm Development Board

PICmicro tm Development Board PICmicro tm Development Board Crownhill Associates smart electronic solutions Disclaimer In order to comply with EMC directive 89/336/EEC, this product should not be used outside of a classroom or laboratory

More information

3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2

3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2 3.2 inch QVGA TFT Color LCD - User s Guide 3.2 inch QVGA TFT Color LCD User s Guide Version 1 & 2 Give graphics and to your application! EA2-USG-0701 v2.1 Rev A 3.2 inch QVGA TFT Color LCD - User s Guide

More information

UPS PIco. to be used with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation

UPS PIco. to be used with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation UPS PIco Uninterruptible Power Supply with Peripherals and I 2 C control Interface to be used with Raspberry Pi B+, A+, B, and A HAT Compliant Raspberry Pi is a trademark of the Raspberry Pi Foundation

More information

LCD Display datasheet

LCD Display datasheet LCD Display datasheet eblocks TM lcd 5V 0V Contents 1. About this document 2. General information 3. Board Layout 4. Getting Started 5. Users Guide Appendix 1 Circuit Diagram Copyright 2004 Matrix Multimedia

More information

GALEP-Adapter 40-DIL => ISP

GALEP-Adapter 40-DIL => ISP 0/0/ GALEP-Adapter 0-DIL => ISP of Article-No.: 0 -- English -Adapter for MCU s, which are in system programmable. -- Deutsch -Adapter für MCU s, die im System programmiert werden können. GALEP-Adapter

More information

Arduino Leonardo ETH. Overview

Arduino Leonardo ETH. Overview Arduino Leonardo ETH Page 1 of 10 Arduino Leonardo ETH Overview The Leonardo ETH is a microcontroller board based on the ATmega32U4 (datasheet (http://download.arduino.org/products/leonardoeth/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf))

More information

The elabtronics USB PORT Module: 2 in 1 PIC Programmer Controller

The elabtronics USB PORT Module: 2 in 1 PIC Programmer Controller The elabtronics USB PORT Module: 2 in 1 PIC Programmer Controller The compact USB PORT Module from elabtronics can be used as a PIC programmer and a controller. It programs user PIC projects using the

More information

AVR Butterfly Training. Atmel Norway, AVR Applications Group

AVR Butterfly Training. Atmel Norway, AVR Applications Group AVR Butterfly Training Atmel Norway, AVR Applications Group 1 Table of Contents INTRODUCTION...3 GETTING STARTED...4 REQUIRED SOFTWARE AND HARDWARE...4 SETTING UP THE HARDWARE...4 SETTING UP THE SOFTWARE...5

More information

8-bit Microcontroller. Application Note. AVR415: RC5 IR Remote Control Transmitter. Features. Introduction. Figure 1.

8-bit Microcontroller. Application Note. AVR415: RC5 IR Remote Control Transmitter. Features. Introduction. Figure 1. AVR415: RC5 IR Remote Control Transmitter Features Utilizes ATtiny28 Special HW Modulator and High Current Drive Pin Size Efficient Code, Leaves Room for Large User Code Low Power Consumption through Intensive

More information

EVAT - Emblitz Varsity Associate Trainee Program - Embedded Systems Design

EVAT - Emblitz Varsity Associate Trainee Program - Embedded Systems Design EVAT - Emblitz Varsity Associate Trainee Program - Embedded Systems Design Product Number: EVAT 001 This fully interactive self study course of embedded system design teaches the basic and advanced concepts

More information

SD/MMC Prototype Adapter User Manual

SD/MMC Prototype Adapter User Manual SD/MMC Prototype Adapter User Manual Manual Revision 1.1 April 21, 2008 12 3749 County Road 30 Delano, MN 55328 Telephone 763.972.3261 www.cloud9tech.com 3749 County Road 30 Delano, MN 55328 Telephone

More information

Display Message on Notice Board using GSM

Display Message on Notice Board using GSM Advance in Electronic and Electric Engineering. ISSN 2231-1297, Volume 3, Number 7 (2013), pp. 827-832 Research India Publications http://www.ripublication.com/aeee.htm Display Message on Notice Board

More information

PolyBot Board. User's Guide V1.11 9/20/08

PolyBot Board. User's Guide V1.11 9/20/08 PolyBot Board User's Guide V1.11 9/20/08 PolyBot Board v1.1 16 pin LCD connector 4-pin SPI port (can be used as digital I/O) 10 Analog inputs +5V GND GND JP_PWR 3-pin logic power jumper (short top 2 pins

More information

MFRD52x. Mifare Contactless Smart Card Reader Reference Design. Document information

MFRD52x. Mifare Contactless Smart Card Reader Reference Design. Document information Rev. 2.1 17. April 2007 Preliminary Data Sheet Document information Info Keywords Content MFRC522, MFRC523, MFRC52x, MFRD522, MFRD523, Mifare Contactless Smart Card Reader Reference Design, Mifare Reader

More information

Figure 1 - Connecting multiple controllers with a RS-485 network

Figure 1 - Connecting multiple controllers with a RS-485 network 8 Relays with 10 A, 250 VAC rated contacts 4 Optically isolated digital inputs up to 30 VDC Connections via pluggable screw terminals 3 Analog inputs, 0 to 5 V or 0 to 20 ma jumper selectable Power indicator

More information

Z232-485 Serial Port Converter

Z232-485 Serial Port Converter J R KERR AUTOMATION ENGINEERING Z- Serial Port Converter The Z- Serial Port Converter is a full-duplex RS to RS serial port converter, connector compatible with standard PC COM ports and NMC control modules

More information

2x1 DisplayPort KVM. EXT-DPKVM-241 User Manual. www.gefen.com

2x1 DisplayPort KVM. EXT-DPKVM-241 User Manual. www.gefen.com 2x1 DisplayPort KVM EXT-DPKVM-241 User Manual www.gefen.com ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00

More information

AN ELNEC EN ISP-HCS12. Application note for In-System Programming of Motorola/Freescale HCS12 microcontrollers

AN ELNEC EN ISP-HCS12. Application note for In-System Programming of Motorola/Freescale HCS12 microcontrollers www.elnec.com AN ELNEC EN ISP-HCS12 Application note for In-System Programming of Motorola/Freescale HCS12 microcontrollers Version 07/2006 1 Introduction The HCS12(X) are cost effective rich featured

More information

SKP16C62P Tutorial 1 Software Development Process using HEW. Renesas Technology America Inc.

SKP16C62P Tutorial 1 Software Development Process using HEW. Renesas Technology America Inc. SKP16C62P Tutorial 1 Software Development Process using HEW Renesas Technology America Inc. 1 Overview The following tutorial is a brief introduction on how to develop and debug programs using HEW (Highperformance

More information

Introducing AVR Dragon

Introducing AVR Dragon Introduction Page 1 of 29 Introducing AVR Dragon ' Front Side Back Side With the AVR Dragon, Atmel has set a new standard for low cost development tools. AVR Dragon supports all programming modes for the

More information

XPort Universal Demo Board User Guide

XPort Universal Demo Board User Guide XPort Universal Demo Board User Guide Part Number 900-563 Revision A September 2009 Copyright and Trademark Contacts 2009 Lantronix. All rights reserved. No part of the contents of this book may be transmitted

More information

AT15007: Differences between ATmega328/P and ATmega328PB. Introduction. Features. Atmel AVR 8-bit Microcontrollers APPLICATION NOTE

AT15007: Differences between ATmega328/P and ATmega328PB. Introduction. Features. Atmel AVR 8-bit Microcontrollers APPLICATION NOTE Atmel AVR 8-bit Microcontrollers AT15007: Differences between ATmega328/P and ATmega328PB APPLICATION NOTE Introduction This application note assists the users of Atmel ATmega328 variants to understand

More information

TURBO PROGRAMMER USB, MMC, SIM DEVELOPMENT KIT

TURBO PROGRAMMER USB, MMC, SIM DEVELOPMENT KIT TURBO PROGRAMMER USB, MMC, SIM DEVELOPMENT KIT HARDWARE GUIDE This document is part of Turbo Programmer documentation. For Developer Documentation, Applications and Examples, see http:/// PRELIMINARY (C)

More information

Thermostat Application Module Kit

Thermostat Application Module Kit Thermostat Application Module Kit PUG0040-00 Product User Guide Kit Contents Overview Thermostat Application Module CD-ROM: Software Examples and Documentation The Thermostat Application Module provides

More information

AVR151: Setup and Use of the SPI. Introduction. Features. Atmel AVR 8-bit Microcontroller APPLICATION NOTE

AVR151: Setup and Use of the SPI. Introduction. Features. Atmel AVR 8-bit Microcontroller APPLICATION NOTE Atmel AVR 8-bit Microcontroller AVR151: Setup and Use of the SPI APPLICATION NOTE Introduction This application note describes how to set up and use the on-chip Serial Peripheral Interface (SPI) of the

More information

Communication with BushingGard using computer USB port

Communication with BushingGard using computer USB port Communication with BushingGard using computer USB port There are two ways of communication with BushingGard through computer USB port: Direct communication between computer USB port and BushingGard USB

More information

Serial Communications

Serial Communications April 2014 7 Serial Communications Objectives - To be familiar with the USART (RS-232) protocol. - To be able to transfer data from PIC-PC, PC-PIC and PIC-PIC. - To test serial communications with virtual

More information

CP2110-EK CP2110 EVALUATION KIT USER S GUIDE. 1. Kit Contents. 2. Relevant Documentation. 3. Software Setup

CP2110-EK CP2110 EVALUATION KIT USER S GUIDE. 1. Kit Contents. 2. Relevant Documentation. 3. Software Setup CP2110 EVALUATION KIT USER S GUIDE 1. Kit Contents The CP2110 Evaluation Kit contains the following items: CP2110 Evaluation Board RS232 Serial Cable USB Cable DVD Quick Start Guide 2. Relevant Documentation

More information

Z8 Encore! XP F082A Series Development Kit

Z8 Encore! XP F082A Series Development Kit ZF0A00KITG Z Encore! XP F0A Series Development Kit UM00-009 Copyright 009 by Zilog, Inc. All rights reserved. www.zilog.com Z Encore! XP F0A Series Development Kit ii Revision History Each instance in

More information

USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs

USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs The Big Deal USB HID device compatible with 32/64 Bit operating systems 8 TTL/LVTTL digital I/O channels, 8 High Voltage digital inputs

More information

1-Port R422/485 Serial PCIe Card

1-Port R422/485 Serial PCIe Card 1-Port R422/485 Serial PCIe Card Installation Guide 1. Introduction Thank you for purchasing this 1-Port RS422/485 Serial PCI Express (PCIe) Card. It is a universal add in card that connects to a PC or

More information

USB to RS-232/422/485 Isolated Converter. Quatech Model SSU2-400I Operation Manual

USB to RS-232/422/485 Isolated Converter. Quatech Model SSU2-400I Operation Manual USB to RS-232/422/485 Isolated Converter Quatech Model SSU2-400I Operation Manual First Edition, Jun 2008 1 Table of Contents 1. Introduction 2 2. Package checklist 3 3. Product Specification 4 4. Product

More information

Build a Programmer for the 68HC705C8 MicroController

Build a Programmer for the 68HC705C8 MicroController Build a Programmer for the 68HC705C8 MicroController Build a Programmer for the 68HC705C8 MicroController... 1 Introduction... 2 Description... 3 Construction...4 Testing the Circuit... 6 Parts List and

More information

EVAL-UFDC-1/UFDC-1M-16

EVAL-UFDC-1/UFDC-1M-16 Evaluation Board for Universal Frequency-to- Digital Converters UFDC-1 and UFDC-1M-16 EVAL-UFDC-1/UFDC-1M-16 FEATURES Full-Featured Evaluation Board for the Universal Frequency-to-Digital Converters UFDC-1

More information

Power Switch-8. Master. Slave. User's Guide. Power Management

Power Switch-8. Master. Slave. User's Guide. Power Management Power Switch-8 Power Management Master Slave User's Guide V.02/2004 Power Switch-8 Power Switch-8 is a couple of power control units made of a Master named Power Switch Master and a slave named Power Switch

More information

AVRprog. programmer by MikroElektronika

AVRprog. programmer by MikroElektronika USB In System ABOUT PROGRAMMER With complementary software, programmer represents a great tool for all those working with Atmel s AVR. The microcontroller connects to the programmer via 6 lines, two of

More information

HD402T Pressure Transmitters

HD402T Pressure Transmitters HD402T Pressure Transmitters Sensor with high accuracy and stability Measurement of pressures relative to the atmosphere or differential pressures Dual analogue output: current and voltage Versions with

More information

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...

More information

Flytron. TinyShield - Programming processors with Arduino. A cooperation between Flytron and CrashingDutchman

Flytron. TinyShield - Programming processors with Arduino. A cooperation between Flytron and CrashingDutchman Flytron TinyShield - Programming processors with Arduino A cooperation between Flytron and CrashingDutchman Contents Contents... 2 Introduction... 3 Prerequisites... 4 Hardware shopping list... 4 Software

More information

Fondamenti su strumenti di sviluppo per microcontrollori PIC

Fondamenti su strumenti di sviluppo per microcontrollori PIC Fondamenti su strumenti di sviluppo per microcontrollori PIC MPSIM ICE 2000 ICD 2 REAL ICE PICSTART Ad uso interno del corso Elettronica e Telecomunicazioni 1 2 MPLAB SIM /1 MPLAB SIM is a discrete-event

More information

Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder

Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder Matthias DD1US updated June 2 nd 2011 Description of the ACECO FC-3002 unit: The ACECO FC-3002 is a handheld frequency

More information

Atmel AVR1924: XMEGA-A1 Xplained Hardware User's Guide. 8-bit Atmel Microcontrollers. Application Note. Preliminary. Features.

Atmel AVR1924: XMEGA-A1 Xplained Hardware User's Guide. 8-bit Atmel Microcontrollers. Application Note. Preliminary. Features. Atmel AVR1924: XMEGA-A1 Xplained Hardware User's Guide Features Atmel ATxmega128A1 microcontroller External memory - 8MB SDRAM Atmel AT32UC3B1256 - Communication gateway - Programmer for Atmel AVR XMEGA

More information

SMARTCARD XPRO. Preface. SMART ARM-based Microcontrollers USER GUIDE

SMARTCARD XPRO. Preface. SMART ARM-based Microcontrollers USER GUIDE SMART ARM-based Microcontrollers SMARTCARD XPRO USER GUIDE Preface Atmel SMARTCARD Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. Atmel SMARTCARD Xplained Pro is designed

More information

Microcontroller Display Interfacing Techniques

Microcontroller Display Interfacing Techniques Display Interfacing Techniques Document Revision: 1.01 Date: September 13, 2006 16301 Blue Ridge Road, Missouri City, Texas 77489 Telephone: 1-713-283-9970 Fax: 1-281-416-2806 E-mail: info@bipom.com Web:

More information

http://www.abacom-online.de/div/setup_usb_µpio.exe

http://www.abacom-online.de/div/setup_usb_µpio.exe USB-µPIO USB AVR board Compact AVR board with Atmel ATmega168-20 High speed clock frequency 18.432000 MHz 100% error free High baud rates Screw-terminal and pin connections 6 pin ISP connector Power supply

More information

POS 208 / 808 USER S MANUAL INTELLIGENT CASH DRAWER WEDGES DISTRIBUTED BY MADE IN CANADA

POS 208 / 808 USER S MANUAL INTELLIGENT CASH DRAWER WEDGES DISTRIBUTED BY MADE IN CANADA POS 208 / 808 DISTRIBUTED BY INTELLIGENT CASH DRAWER WEDGES MADE IN CANADA USER S MANUAL 2 Table of Contents Introduction............................................... 3 POS 208 Installation........................................

More information

ATtiny104 Xplained Nano. Preface. Atmel AVR 8-bit Microcontrollers USER GUIDE

ATtiny104 Xplained Nano. Preface. Atmel AVR 8-bit Microcontrollers USER GUIDE Atmel AVR 8-bit Microcontrollers ATtiny104 Xplained Nano USER GUIDE Preface The Atmel ATtiny104 Xplained Nano evaluation kit is a hardware platform to evaluate the ATtiny104 microcontroller. Supported

More information

Digital Guitar Effects Pedal

Digital Guitar Effects Pedal Digital Guitar Effects Pedal 01001000100000110000001000001100 010010001000 Jonathan Fong John Shefchik Advisor: Dr. Brian Nutter SPRP499 Texas Tech University jonathan.fong@ttu.edu Presentation Outline

More information

Development System Rev. 0310A

Development System Rev. 0310A Development System Rev. 0310A NetMedia, Inc. Tucson, Arizona NetMedia, Inc. 10940 N. Stallard Pl Tucson, Arizona 85737 TEL: (520) 544-4567 FAX: (520) 544-0800 PURCHASE TERMS AND CONDITIONS The laws of

More information

CP2102 Serial to USB Converter

CP2102 Serial to USB Converter Campus Component Pvt. Ltd. DISCLAIMER Information furnished is believed to be accurate and reliable at the time of publication. However, Campus Component Pvt. Ltd. assumes no responsibility arising from

More information