TABLE OF CONTENTS. Terms and conditions of sale General features. Manufacturing standards

Transcription

1

2 TABLE OF CONTENTS SECTION ACCREDITATION PAGE 1 INTRODUCTION Terms and conditions of sale General features SIN Manufacturing standards SIN DESKS Shells Desks with pedestal(s) Desks with pedestal(s) and convex front (CX) Extended desks with straight cut and pedestal Extended desks with curved cut and pedestal Arched desks SIN SIN SIN SIN SIN SIN RETURNS Empty returns Reversible returns Returns with pedestal(s) Returns with combination pedestal Returns with lateral filing cabinet Returns with cabinet Bridges SIN SIN SIN SIN SIN SIN SIN TABLES Arched tables D, P and Q tables (without end gable) D and P tables Extended D tables Extended P tables D tables with modesty panel P tables with modesty panel Extended D tables with modesty panel Extended P tables with modesty panel End tables Hook tables CREDENZAS SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN Credenzas with pedestal(s) SIN Credenzas with combination pedestal(s) SIN Credenzas with lateral file drawers SIN Credenzas with cabinet SIN Combination credenzas SIN Server credenzas SIN Transaction tops SIN HUTCHES AND WALL STORAGE Cabinet hutches SIN Cabinet hutches with glass or plexiglass doors SIN Corner hutches SIN Wall hutches SIN Wall hutches with pigeon hole unit SIN Hutches with glass or plexiglass doors SIN Hutches with retractable doors SIN Hutches with glass or plexiglass doors and pigeon hole unit SIN Hutches with retractable doors and pigeon hole unit SIN Hutches with hinged doors SIN Hutches with hinged doors and pigeon hole unit SIN Open hutches SIN Open hutches with pigeon hole unit SIN Hutches with adjustable shelves SIN Tackboards SIN

3 TABLE OF CONTENTS 6 HUTCHES AND WALL STORAGE ACCREDITATION PAGE Tackboards for hutches Tackboards and display boards SIN SIN CORNER TABLES Corner tables LATERAL TABLES Lateral tables Lateral tables with corner cut Lateral tables with curved cut SIN SIN SIN SIN EXTENDED CORNER TABLES Straight extended corner tables Curved extended corner tables 10 COMBINATION PEDESTALS AND LATERAL FILING CABINETS Factory-installed pedestals Independent pedestals Mobile pedestals Combination pedestals and lateral filing cabinets SIN SIN SIN SIN BOOKCASES AND CABINETS Corner bookcases Bookcases Display cases Form holders 1-door cabinets Cabinets with 1 glass door 2-door cabinets Cabinets with 2 glass doors Wardrobes Wardrobes with glass or plexiglass doors Wardrobes with pedestals Multiple units "EZZY" PARTITIONS Introduction to the EZZY product series Category A partitions Category B partitions Category C partitions Category D partitions Category E partitions Category F partitions Category G partitions Category H partitions Category I partitions Plexiglass options Shelf options Miscellaneous options Accessories for the EZZY series SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN RECEPTION STATIONS (includes stations from the ''Receptions'' brochure) "Spheric" reception stations (Ref: ''Receptions'', REC1 layout) "Smartflex" reception stations (Ref: ''Receptions'', REC2 layout) "Manhattan" reception stations (Ref: ''Receptions'', REC3 layout) "Liber-T" reception stations (Ref: ''Receptions'', REC4 layout) "C" reception stations ( Ref: ''Receptions'', REC5 layout) "GEO" reception stations (Ref: ''Receptions'', REC6 layout) "L" reception stations "Gallery" reception stations (Ref: ''Receptions'', REC7 layout) SIN SIN SIN SIN SIN SIN SIN SIN

4 TABLE OF CONTENTS 13 RECEPTION STATIONS (includes stations from the ''Receptions'' brochure) ACCREDITATION PAGE SIN SIN "Gallery" reception stations "Manhattan" reception stations HOSPITALITY AND CONFERENCE TABLES All-purpose rectangular tables Rectangular tables with tubular legs Rectangular tables on metal base Hospitality tables Kalypso hospitality tables Elliptic conference tables "Racetrack" conference tables Boat-shaped conference tables with rounded end Rectangular conference tables Round tables Round tables on metal base Square tables SIN CONFERENCE TABLE ACCESSORIES Conference boards SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN Lecterns SIN Mobile service carts Connector tops SIN SIN ACCESSORIES Handles Metal legs Keyboard trays CPU holders Computer monitor brackets, clamp installation Computer monitor brackets, grommet installation Suspended storage systems Miscellaneous ELECTRICITY Introduction Calculating amperage Communication boxes for single stations Communication boxes for multiple stations Misc. items for connecting communication components Electricity for 4-track system Electricity for 8-track system SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN SIN

5 PLEASE AFFIX YOUR FEDERAL GOVERNMENT ACCREDITATION FORM HERE FOR MORE INFORMATION, PLEASE CONTACT YOUR MANUFACTURER'S REPRESENTATIVE 4

6 TERMS AND CONDITIONS OF SALE PRICES The prices are "suggested retail" and are subject to changes without notice. Applicable taxes are not included. If you have an open and active account with Logiflex, merchandise will be invoiced at the prices prevailing at the time of shipment. Advanced payment for your order may be requested if the opening of your account has not been completed or if your account has become inactive. TERMS OF PAYMENT Net 30 days / F.O.B. Sherbrooke (Québec), Montréal (Québec) or Québec City (Québec). The invoice will be dated the same ship date and payable 30 days from that date including applicable freight charges. Mobilier de bureau Logiflex remains the owner of the merchandise until the invoice is paid in full. CUSTOMIZED PRODUCTS (SPECIAL ITEMS) Price requests for customized products or special items can be submitted via the "Online services" section of our Web site, at Our quotations department will study your request and send you a quotation and a technical drawing for approval as soon as possible. Modifications to quotations or technical drawings can be requested the same way. The approved quotation(s) and technical drawing(s) can then be attached to your purchase order. ORDERS An official purchase order must be issued for all purchases. Your purchase order must contain the following information: your company letterhead, your reference number, the delivery address (with contact name and phone number), the complete product codes, furniture colour(s), quantities, descriptions, retail prices and net prices, project registration number (if applicable), and your approved quotation and technical drawing (for special items). Please note that a quotation cannot serve as a purchase order. RETURNS All returns must first be approved by Logiflex. If the return is accepted, A Logiflex customer service representative will send you an official return authorization form in order to facilitate procedures between you, the carrier, and the Logiflex merchandise reception clerk. Additional costs for shipping or other expenses may be applied following any merchandise returns. MODIFICATIONS AND/OR CANCELLATIONS You have 48 hours from the time we acknowledge receipt of your order to make any requests for corrections or modifications. You may modufy or cancel your order during this same 48-hour period. If you would like to modify or cancel your order after this 48-hour verification period, please check with a Logiflex customer service representative. Orders cannot be changed or cancelled if production has already begun or if Logiflex has already received the raw materials. LIABILITY Logiflex's responsibility ends once the carrier has delivered all items in good condition. A delivery receipt signed by the customer acknowledges that the shipment is complete and has been received in good condition. CLAIMS Logiflex recommends inspecting the shipment before signing the carrier's delivery receipt. You must notify Logiflex of any incomplete shipments or damaged furniture as soon as possible. Requests to replace damaged products can be made via the "Online services" section of our Web site, at Our after-sales service department will examine your request and help you correct the situation as rapidly as possible. 5

7 TERMS AND CONDITIONS OF SALE CHANGES Logiflex reserves the right to make changes to the materials, accessories, components, specifications and designs, and to discontinue collections and/or models, at any time and without prior notice. STORAGE AND/OR SHIPPING FEES If you would like to delay the delivery of an order already in production at Logiflex, weekly storage fees may be charged. The suggested retail prices in this list usually include delivery to your warehouse, for several Quebec regions; however, some conditions may apply. If the minimum amount of your order is $10,000 net, the order can be shipped directly to your customer. In this case, a 53-foot unloading dock must be available at the time of delivery. This information must first be validated with your Logiflex customer service representative. Direct shipping is subject to additional fees. Any delay experienced by Logiflex carriers during delivery may also incur additional charges. WARRANTY Logiflex guarantees its products for ten years from the date invoiced to the distributor. This guarantee applies only to faults or defects resulting from normal use of the product and is limited to the repair or replacement of said product, at Logiflex's discretion. Logiflex is not responsible for damage resulting from abusive use or unauthorized modifications. All furniture items are inspected and verified at the time of packaging; any breakage at delivery time should be reported immediately to the carrier for damage claim at destination point. 6

8 GENERAL INFORMATION GENERAL FEATURES QUICK SHIP PROGRAM Products available for the quick ship program are identified by the above icon. The icon also appears beside the codes of items offered through this program in the different sections of this price list. HANLDES Handles are included for the majority of furniture items with façades (with the exception of hutches, for which handles are sold as options). The standard handle style, when included, is HJAB (black). GROMMETS Grommets are included for some items, such as lateral, end, corner, extended-corner and arc tables, returns, and reception stations. When grommets are included, the standard style is the ELPF grommet. LOCKS LKBL (black) locks are included for some items, such as pedestals, lateral file drawers, cabinets, wardrobes, combination units and credenzas. To specify a different type of lock, please refer to the accessories section at the end of this price list to see the different models offered by Logiflex. PEDESTALS All drawers are made of black Medium density fiberboard (MDF) with an average thickness of 7/16". Type "D", "E" and "F" pedestals include a black polyvinyl chloride (PVC) extrusion for easy finger grip operation (no handle). DRAWER FRONTS A PVC strip 2.5 mm thick is systematically applied along all drawer front edges. WOOD GRAIN The wood grain is always vertical on façades and furniture doors. Logiflex cannot guarantee that the wood grain will match up on HPL surfaces that are more than 144 inches (12 feet) long. HUTCHES All hutches have a grommet at the bottom and a round grommet at the back of the unit for light fixture wires. FINISHES You must specify the desired finish(es) for each item of furniture ordered. Please make your selection(s) from the Logiflex chart. FABRICS You must specify the fabric when the item so requires. Please make your selection(s) from the Logiflex chart. LEVELLERS All furniture items (except bridges) sit on black adjustable levellers, 1" in diameter, allowing for up to 1" adjustment for the purposes of levelling the furniture. The standard finished height for work surfaces is 29". ACCESS DOORS (AD) FOR CONFERENCE TABLE BASES An access door can be added to each conference table base, where permitted by the type of base. If applicable, the access door option (AD) will be offered on the specifications sheet of the conference table in question. This information can be found in the "How to order" section of the conference table specifications pages in this price list. Access door in each base of the table Channel 7

9 GENERAL INFORMATION MANUFACTURING STANDARDS STANDARD TYPES OF MODESTY PANELS MINISTER MODESTY PANELS (MID AND MIDC OPTIONS) PM (10'' from the surface) SM (18-1/2'' from the surface) FM (full height) MID option (straight minister) MIDC option (curved minister) CONVEX SURFACES DESK WITH RECESSED MODESTY 4 5/8'' 6'' Regular rectangular surface Convex surface (CX) 30" depth: 4-5/8'' standard recess 36" depth: 6'' standard recess GROMMET POSITIONING Returns Desks and credenzas centered grommet (GRC) centered grommet (GRC) Grommet centered in space between pedestal and end of unit (GRC) centered grommet (GRC) Left grommet (GRL) Right grommet (GRR) Left grommet and right grommet (GLR) D, P, extended and arched tables Grommet centered with end gable Grommet centered with end gable Grommet centered with end gable Grommet centered with end gable Extended corner tables Corner grommet (GRC) Corner and left grommet (GRL) Corner and right grommet (GRR) Corner, left and right grommet (GLR) BASES 1/2 leg on left and right (HH) 1/2 leg on left / Full leg on right (HR) Full leg on left / 1/2 leg on right (LH) Full legs (LR) 8

10 GENERAL INFORMATION MANUFACTURING STANDARDS POSITIONING OF WOOD MOULDINGS ( MAW AND MAX ) Drawings must be supplied for any orders with wood mouldings. The mouldings will be placed according to the configuration and type of furniture ordered. Shells and desks Corners Returns Extended corners with two half legs (HH) Bridges End tables Credenzas Rectangular conference tables Hutches Boat-shaped conference tables (rounded) Bookcases and cabinets "Racetrack" conference tables Combination pedestals Elliptical conference tables Filing cabinets Conference wall cabinets Multiple units Lecterns Corner hutches and bookcases Wardrobes D, P and Q tables, without gable Mobile service carts D, P and Q tables, with gable 1/2-moon and 1/4-moon end tables Arched tables Round and square tables Truncated tables 9

11 GENERAL INFORMATION MANUFACTURING STANDARDS POSITIONING OF PVC MOULDINGS ( MAR ) MAR mouldings must be installed on the opposite sides of a same item of furniture. They cannot be joined together perpendicularly because their edges must be cut at a 90 degree angle and not a 45 degree angle. Shells and desks D, P and Q tables Convex surfaces Corner tables Returns Extended corner tables Bridges Arched tables Credenzas End tables Hutches Round and square tables Combination pedestals, bookcases, wardrobes, multiple units and filing cabinets "Racetrack" conference tables Lecterns Boat-shaped conference tables with rounded ends Mobile service carts Conference wall cabinets 10

12 GENERAL INFORMATION MANUFACTURING STANDARDS EXAMPLES OF STATION CONFIGURATIONS WITH WOOD MOULDINGS ( MAW AND MAX ) U-shaped work station (against a wall) L-shaped work station (independant island) CONFIGURATION WITH 5/8'' SPACE CONFIGURATION WITHOUT SPACE In cases where no drawing is provided with your order, the wood mouldings will be installed on all three sides of the furniture, as shown above. To order your work station without any spaces, please provide us with a drawing of the desired work station. NOTE: Wood mouldings cannot be installed where two surfaces meet. A 0.05 mm PVC moulding will be installed at these locations. EXAMPLES OF STATION CONFIGURATIONS WITH PVC MOULDINGS ( MAR ) 11

13 GENERAL INFORMATION MANUFACTURING STANDARDS - MOULDINGS PREVIEW COMPONENT MATERIALS EDGES / MOULDINGS 1'' surfaces ( ML ) Thermofused laminate (TFL) - 1" high-density particle board 2.5 mm polyvinyl chloride (PVC) 1 1/16'' surfaces ( MLL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm polyvinyl chloride (PVC) 1 5/8" surfaces ( MA ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm polyvinyl chloride (PVC) 1 5/8'' surfaces ( MAR ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm corrugated polyvinyl chloride (PVC) 1 9/16" surfaces ( MARL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm corrugated polyvinyl chloride (PVC) 1 9/16" surfaces ( MAL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 2.5 mm polyvinyl chloride (PVC) 1 5/8" surfaces ( MAW ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 5/16" wood moulding 1 5/8'' surfaces ( MAX ) Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 5/16" wood moulding 1 9/16" surfaces ( MAWL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 5/16" wood moulding 1 9/16" surfaces ( MAXL ) High pressure laminate (HPL) - 1-1/2'' high-density particle board, 1/32" HPL sheet on surface, 1/32" balancing sheet under surface (prevents bending) 5/16" wood moulding Front, back and modesty Thermofused laminate (TFL) - 1-5/8'' highdensityparticle board 2.5 mm polyvinyl chloride (PVC) on showing surfaces and 0.5 mm polyvinyl chloride (PVC) on nonshowing surfaces 12

14 SIN711-2 tfl hpl tfl hpl SHELLS (EMPTY DESKS) MANUFACTURING STANDARD: NO GROMMET EDGES / MOULDINGS tfl hpl MAR MARL MAW MAWL Shells A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" " /8" recessed modesty 36" " recessed modesty Modesty recesses: 4 5/8'' 6'' Modesty heights: PM SM FM ( 10"H ) ( 18-1/2"H ) ( Full ) M _ Serie ( A B ) () FM (STD) PM SM modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See Modesties If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge p.8 Grommet positions Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) p.8 Grommet styles ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each p

15 SIN711-2 tfl hpl tfl hpl DESKS WITH "D" PEDESTAL(S) ONE UTILITY DRAWER AND ONE FILE DRAWER ON LEFT AND/OR RIGHT MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BF pedestal on left EDGES / MOULDINGS tfl hpl MAR MARL MAW MAWL A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 30" D /8" recessed modesty D3060 D3066 D Desk with BF pedestal on right 36" D D D D " recessed modesty A B 30" 3048D D D D /8" recessed modesty 36" 3648D D D D " recessed modesty Desk with BF pedestals on left and right 30" D3060D D3066D D3072D /8" recessed modesty 36" D3660D D3666D D3672D " recessed modesty D D If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

16 SIN711-2 tfl hpl tfl hpl DESKS WITH "E" PEDESTAL(S) TWO UTILITY DRAWERS AND ONE FILE DRAWER MANUFACTURING STANDARDS: tfl hpl MAR MARL MAW MAWL PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BBF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" Desk with BBF pedestal on right Desk with BBF pedestals on left 30" E E E E /8" recessed modesty 36" E E " recessed modesty " 3060E E E E /8'' recessed modesty 6" recessed modesty E3672 E3684 A B EDGES / MOULDINGS 36" 3660E E E E and right 30" E3060E E3066E 4-5/8'' recessed E3072E modesty E3084E Minister front options (MID and MIDC) 36" E3660E E3666E " recessed modesty E3672E E3684E Modesties Grommet positions Grommet styles Handles MID MIDC E E If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM MID MIDC modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value p.8 Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.290 p

17 SIN711-2 tfl hpl tfl hpl DESKS WITH "F" PEDESTAL(S) TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET tfl hpl MAR MARL MAW MAWL Desk with FF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" Desk with FF pedestal on right Desk with FF pedestals on left 30" F F F F " F F F F " 3060F F F F " 3660F F and right 30" F3060F F3066F 4-5/8'' recessed F3072F modesty F3084F Minister front options (MID and MIDC) 4-5/8" recessed modesty 6" recessed modesty 4-5/8'' recessed modesty 6" recessed modesty 36" F3660F F3666F F3672F F3684F " recessed modesty 3672F 3684F EDGES / MOULDINGS MID Modesties Grommet positions Grommet styles Handles MIDC F F If pedestal If pedestal M _ ( A B ) on the left on the right Serie () FM (STD) PM SM MID MIDC modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC GLR ELPF (STD) HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p

18 SIN711-2 tfl hpl tfl hpl DESKS WITH "E" AND "F" PEDESTALS EDGES / E: TWO UTILITY DRAWERS AND ONE FILE DRAWER MOULDINGS F: TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk with BBF pedestal on left A B 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and FF pedestal on right 30" E3060F E3066F /8" recessed E3072F modesty E3084F Desk with FF pedestal on left 36" E3660F E3666F E3672F E3684F " recessed modesty and BBF on right 30" F3060E F3066E /8'' recessed F3072E modesty F3084E Minister front options (MID and MIDC) 36" F3660E F3666E F3672E F3684E " recessed modesty MID MIDC FM (STD) E F PM F E SM If pedestal If pedestal ( A B ) MID M _ on the left on the right MIDC Serie () modesty GRL GRR GRC GLR (PF location) ELPF (STD) HAPF($) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

19 SIN711-2 tfl hpl tfl hpl DESKS WITH "E" PEDESTAL AND CONVEX FRONT (CX) TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 24'' E243060CX E243066CX E243072CX Flush modesty E303660CX " E303666CX E303672CX E303684CX /8" recessed modesty E364260CX '' E364266CX E364272CX E364284CX " recessed modesty CX desk with BBF pedestal on right 24'' ECX Flush ECX modesty ECX ECX " ECX ECX ECX /8" recessed modesty EDGES / MOULDINGS Minister front options (MID and MIDC) ECX '' ECX " recessed modesty ECX ECX MID MIDC FM (STD) PM E E SM If pedestal If pedestal MID M _ on the left ( A B C ) on the right CX MIDC Serie () modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each 18 p.8 p.8 p.290 p.279

20 SIN711-2 tfl hpl tfl hpl DESKS WITH "F" PEDESTAL AND CONVEX FRONT (CX) TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS CX desk with FF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 24" F243060CX F243066CX F243072CX Flush modesty 30'' F303660CX F303666CX F303672CX F303684CX /8" recessed modesty 36'' F364260CX F364266CX F364272CX F364284CX " recessed modesty CX desk with FF pedestal on right 24" FCX FCX Flush modesty FCX '' FCX FCX FCX FCX /8" recessed modesty Minister front options (MID and MIDC) 36'' FCX FCX " recessed modesty FCX FCX MID MIDC FM (STD) PM If pedestal If pedestal MID M _ on the left ( A B C ) on the right CX MIDC Serie () F F SM modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each p.8 p.8 p.290 p

21 SIN711-2 tfl hpl tfl hpl DESKS WITH "E" OR "F" PEDESTALS AND CONVEX FRONT (CX) E: TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL F: TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestals on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and right 24" E243060ECX E243066ECX Flush modesty E243072ECX '' E303660ECX E303666ECX E303672ECX E303684ECX /8" recessed modesty 36'' E364260ECX E364266ECX E364272ECX E364284ECX " recessed modesty CX desk with FF pedestals on left 24" F243060FCX and right F243066FCX Flush modesty F243072FCX '' F303660FCX F303666FCX /8" recessed modesty F303672FCX F303684FCX EDGES / MOULDINGS Minister front options (MID and MIDC) 36'' F364260FCX recessed F364266FCX F364272FCX F364284FCX MID Modesties Grommet positions Grommet styles Handles MIDC E If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each E FM (STD) PM SM MID MIDC F F If pedestal If pedestal M _ on the left ( A B C ) on the right CX Serie () modesty GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p

22 SIN711-2 tfl hpl tfl hpl DESKS WITH "E" AND "F" PEDESTALS AND CONVEX FRONT (CX) E: TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL F: TWO FILE DRAWERS MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET CX desk with BBF pedestal on left A B C 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" and FF pedestal on right 24" E243060FCX E243066FCX Flush modesty E243072FCX E303660FCX '' E303666FCX /8" E303672FCX recessed modesty E303684FCX E364260FCX '' E364266FCX E364272FCX E364284FCX CX desk wtih FF pedestal on left 24" F243060ECX and BBF pedestal on right Flush F243066ECX modesty F243072ECX F303660ECX '' F303666ECX F303672ECX F303684ECX Minister front options (MID and MIDC) 6" recessed modesty 4-5/8" recessed modesty 36'' F364260ECX F364266ECX F364272ECX F364284ECX " recessed modesty EDGES / MOULDINGS MID Modesties Grommet positions Grommet styles Handles MIDC FM (STD) PM SM MID MIDC E F F E If pedestal If pedestal M _ on the left ( A B C ) on the right CX Serie () modesty If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each GRL GRR GRC ELP (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See p.8 p.8 p.290 p

23 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "E" PEDESTAL ON LEFT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on left E LB " E LB E LB E LB /8" recessed modesty E LB E LB E LB E LB EDGES / MOULDINGS Minister front options (MID and MIDC) 36" 6" recessed modesty E LB E LB E LB E LB E LB E LB E LB E LB MID MIDC FM (STD) PM E SM pedestal M _ ( A B C D ) MID on the left LB MIDC Serie () modesty GRL GRR GRC GLR ELPF HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

24 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "E" PEDESTAL ON RIGHT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the right 30" A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on right ELB /8" recessed ELB modesty ELB ELB " 6" recessed modesty ELB ELB ELB ELB ELB ELB ELB ELB Minister front options (MID and MIDC) ELB ELB ELB ELB MID MIDC FM (STD) PM SM MID MIDC E ( A B C D ) pedestal M _ LB on the right Serie () modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail / each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

25 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "F" PEDESTAL ON LEFT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on left F LB " F LB F LB F LB /8'' recessed modesty F LB F LB F LB F LB EDGES / MOULDINGS Minister front options (MID and MIDC) 36" 6" recessed modesty F LB F LB F LB F LB F LB F LB F LB F LB MID MIDC FM (STD) GRL PM GRR F SM GRC ELPF (STD) MID GLR HAPF($) pedestal M _ ( A B C D ) LB MIDC on the left (PF location) (PF style) Serie () modesty grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

26 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH STRAIGHT CUT AND "F" PEDESTAL ON RIGHT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET Desk extended to the right A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on right FLB " FLB FLB FLB /8" recessed modesty " FLB FLB FLB FLB " recessed modesty FLB FLB FLB FLB EDGES / MOULDINGS Minister front options (MID and MIDC) FLB FLB FLB FLB MID MIDC F ( A B C D ) pedestal M _ LB on the right Serie () FM (STD) PM SM MID MIDC modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles See Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each p.8 p.8 p.290 p

27 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "E" PEDESTAL ON LEFT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on left E RB " E RB /8" recessed E RB modesty E RB Minister front options (MID and MIDC) 36" 6" recessed modesty E RB E RB E RB E RB E RB E RB E RB E RB E RB E RB E RB E RB MID MIDC FM (STD) PM SM MID MIDC E pedestal M _ ( A B C D ) RB on the left Serie () modesty GRL GRR GRC GLR ELPF HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

28 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "F" PEDESTAL ON LEFT TWO FILE DRAWERS tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the left A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with FF pedestal on left F RB " F RB F RB F RB /8" recessed modesty 36" 6" recessed modesty F RB F RB F RB F RB F RB F RB F RB F RB Minister front options (MID and MIDC) F RB F RB F RB F RB MID MIDC F pedestal M _ on the left ( A B C D ) RB Serie () FM (STD) PM SM MID MIDC modesty GRL GRR GRC ELPF (STD) GLR HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p

29 SIN711-2 tfl hpl tfl hpl EXTENDED DESKS WITH ROUNDED CUT WITH "E" PEDESTAL ON RIGHT TWO UTILITY DRAWERS AND ONE FILE DRAWER tfl hpl MAR MARL MAW MAWL MANUFACTURING STANDARDS: PVC EXTRUSION FOR LATERAL OPENING OF DRAWERS / NO GROMMET EDGES / MOULDINGS Desk extended to the right A B C D 1" 1-1/16" 1-5/8" 1-9/16" 1-5/8" 1-9/16" with BBF pedestal on right ERB " ERB ERB /8" recessed modesty ERB Minister front options (MID and MIDC) 36" 6" recessed modesty ERB ERB ERB ERB ERB ERB ERB ERB ERB ERB ERB ERB MID MIDC FM (STD) PM SM MID MIDC E ( A B C D ) pedestal M _ RB on the right Serie () modesty GRL GRR GRC GLR ELPF (STD) HAPF($) (PF location) (PF style) grommets (PF) See section: Accessories handles Modesties Grommet positions Grommet styles Handles If the choice of modesty is not specified, the standard is full (FM) Modesty options PM (10" high) or SM (18-1/2" high) are also available, at no charge For MID option (minister front), add $63 retail to the desk value For MIDC option (curved minister front), add $124 retail to the desk value Add grommets at no charge: GRL (left), GRR (right), GRC (center) or GLR (left and right) ELPF black grommet (elliptic with Logiflex logo) at no charge HAPF satin nickel grommet also offered / For this option, add $13 retail each To add handles, please choose from the Logiflex list / Add $10 retail each See p.8 p.8 p.290 p