WT SERIES Win Temperature

Transcription

1

2 WT SERIES Win Temperature (TC) (RTD) Input NO Output NC COM (Relay) (m/v) Voltage pulse (SSR drive SCR/TRIC Trigger (m/v/mv) M Motor Valve Control Input type: 0-0m,4-0m,0-0V,-5V,-0V,0-V PLC Step Step PID PID+FUZZY ON/OFF ON/OFF Hysteresis PID Control PIDFuzzy Control sensor Signal type: PV,SV Ouput type: 0-0m,4-0m,0-0V,-5V,-0V,0-V Just push the mounting bracket to panel. Without using any screws. 94CM WT Series are shorter than other brands. ut with more functions. ppro x 0CM sensor M SCR/TRIC Trigger GS RS485 PLC Up to3 controllers can be connected. Max length 00M. HMI HMI Modbus Maximum with 3 sets of alarm. larm types list as below: Deviation Deviation High larm Deviation Low larm Deviation High/Low larm and larm PV PV High larm PV Low larm System System Failed larm System Normal larm Program Program Run larm Program End larm Segment End larm TRIC (TTL Communication) Use this function avoid alarm acts frequently or acts due to external disturbance. SCR /3 /3 Up to 0 controllers can be connected. Max length M. The SV value of slave controllers will be remoted mastercontroller, and reached to max value at the same time.

3 T Function can calculate the optimize PID value for your control system, without trying and error manually. IP65 Ip66 dust & water proof is available for all models (optional function). Input with 4bit /D resolution,0.% accuracy of FS.uilt in utozero-utospan function keep good accuracy. uilt in segment of RMP & SOK Function. pplicable on SOFT start condition. ll models get CE and UL approval. Operate on any voltage from C 85~65V at 50/60 Hz. DC4V is also available(optional function). ll parameters are separated in 3 operation levels. Each parameter can be hidden or locked to prevent unauthorized changes. WT series sport both MODUS RTU and MODUS SCII protocol. Communication between controller and HMI or otherequipment is more convenient (optional function). Heater current flowing through CT can be displayed on controller. If heater current is less then H set value, L will be activated(optional function).

4

5 WT S WT-404 WT-707 WT-409 WT-904 WT C D Relay 0-0m 0-0V -5V -0V SSR 3 SSR SCR 3 SCR 0 Relay V C -5V D -0V 0-0m 0 4-0m 4-0m 3 H* H+L C H+L +l3 0 C D 4-0m 0-0m 0-0V -5V -0V 0 C D 4-0m 0-0m 0-0V -5V -0V 0 3 TTL MODUS RS3 MODUS RS485 C00-40V 0 D DC 4V S P SSR WT-404 WT-904 WT-707 WT-409 WT SSR SCR 3 SCR TC RTD K J R S E N T W PLII U L JPT 00 PT 00 JPT 50 K K4 J J4 R S E N T W PL U L JP JP4 DP DP4 JP. JP C(39.0 F) C(47 F) C(39.0 F) C(47 F) C(9 F) C(9 F) 0-80 C(3308 F) C(47 F) 0-00 C(9 F) C(75.0 F) C(363 F) C(37 F) C(75.0 F) 0-00 C(39 F) 0-00 C(39 F) 0-00 C(39 F) K K5 J J5 R S E N T W Pl U L JP JP5 DP DP5 JP. JP C(75.0 F) C(83 F) C(75.0 F) C(83 F) C(36 F) C(36 F) C(65 F) C(37 F) C(39.0 F) 0-30 C(408 F) C(534 F) C(39 F) C(47 F) C(75 F) C(75 F) C(75 F) C(75 F) C(75.0 F) C(75 F) K3 K6 J3 J C(9 F) 0-00 C(9 F) T C(66.0 F) U C(75 F) JP3 JP6 DP3 DP6 JP.3 JP C(39 F) C(39 F) C(39.0 F) N4 Or V KR V m N 6 --V V V N 7 0-0mV N mV mV or 8 0-0mV V or N mV 4-0m 93-5V 94-0mV

6 WT-404 WT-904 WT-707 WT-409 WT x48cm 96x48cm 7x7cm 48x96cm 96x96cm C 85-65V, DC4V 50/60Hz pprox 3V pprox 4V pprox 3V pprox 4V E RPOM pprox 4V 50ms TC K, J, R, S,, E, N, T, W, PL, U, L, PID DPT00, JPT00, JPT50 m dc 4-0m, 0-0m Voltage dc 0-V,, 0-0V, -5V, -0V, -0-0mV, 0-0mV, 0-0mV, -50mV, 0-50mV 0000, 000.0, 00.00, available for m or Voltage dc input HET mode or COOL mode Relay SPST type SPDT type SPDT type SPDT type SPDT type 3, 0V,electrical life 00,000 time or more(under the rated load). For SSR drive. ON:4V, OFF:0V, maximum load current :0m. m dc 4-0m, 0-0m, maximum load resistance:560 Voltage dc, 0-V, -5V, -0V,maximum load current:0m. SPST type SPDT type SPST type SPDT type SPDT type 3, 0V PID, P, PI, PD, ON/OFF(P=0), FUZZY PID range P:0-00%, I: Secs, D:0-900 Secs 0.% of FS 0M or more between input terminals and case(ground)at DC500V 0M or more between output terminals and case(ground)at DC500V 000V C for minute between input terminals and case (ground) 500V C for minute between output terminals and case (ground) 0-50C 50-85% RH Wt404 approx50g, WT407/WT704/WT707 approx 5g, Wt909 approx 300g PV:7mm/SV:4m PV:7mm/SV:7mm PV:4mm/SV:0m PV:7mm/SV:7mm PV:4mm/SV:0m WT-404 WT-904 WT-707 WT-409 WT-909 Patterns with 8 segments each. The patterns can be linked together as 6 segments use. SPST type SPST type SPST type SPST type SPST type Relay 3, 0V, electrical life:00,000 times or more(under the rated load) For SSR drive.on:4v, OFF:OV,maximum load current:0m m dc 4-0m, 0-0m, maximum load resistance:560 Voltage dc, 0-V, -5V, -0V, Maximum load current:0m. SPST type SPDT type SPDT type SPDT type SPDT type 3, 0V electrical life:00,000 times or more (under the rated load). X SPST type SPST type SPST type SPST type 3, 0V,electrical life 00,000 times or more (under the rated load). Signal type :PV, SV m dc 4-0m, 0-0m, maximum load resistance:560 Voltage dc, 0-V, -5V, -0V, maximum load current:0m Remote SV Input 4~0m, 0~0m, 0~5V, 0~0V, ~5V, ~0V are available Protocol:MODUS, RS3, RS485, TTL Interface:RS3, RS485, TTL audrate:38400, , 4800, 400 bps Ip65

7