INFRASTRUCTURE BU AUTOMATION / IED

Size: px
Start display at page:

Download "INFRASTRUCTURE BU AUTOMATION / IED"

Transcription

1 Computer's connection to Sepam with USB front panel Windows 7 version INFRASTRUCTURE BU AUTOMATION / IED Grenoble, France Meylan M4 Hong Kong Quarry bay Energy Automation-IED Application Expertise Team Application note Release date: Version: Written by: Checked by : Approved by: 14/11/2013 A Patrice LOUIS Daniel MOUGIN Schneider Electric Industries SAS Business Unit INFRASTRUCTURE Sepam IED

2 1 ) OBJECTIVES Sepam are now delivered with an USB connection on the front panel. This document aims to explain the necessary installation on computer's side to allow the connection with the Sepam. 2 ) PREREQUISITES It is mandatory to use SFT2841 in version 14.0 or higher. This version differs from V13.1 mainly by a new release of the embedded Modbus serial driver. It is actually this new serial driver version that is mandatory. Right click on the driver's icon in task bar and select "about" to display the information about the driver. You must have version higher or equal to 1.11 (Win XP) or 3.3 (Win 7) If you are installing SFT2841 V14 now, remind to reboot the computer after the installation. 3 ) FIRST CONNECTION TO SEPAM When connecting the USB cable from computer to Sepam, the computer should detect the Sepam, link the USB driver to this new device and assign a COM Port to it. BE PATIENT!!! Sometimes this mechanism takes up to one minute It is possible to watch the different steps of the process by opening the Device Manager in Control Panel. To do this, open the control Panel by pushing the Control panel button in the Windows Start Menu.

3 When control Panel window is open, you have to select System Menu: Then you have to select Device Manager on top left of next window:

4 In Device Manager s window, when Sepam has just been connected to the PC, Sepam Series appears in the Other devices folder. This means that USB driver is not already installed and that no COM port is assigned to Sepam Device. After a few seconds (or minutes), Windows installs the USB driver and assigns first COM port available (COM7 here below) to Sepam Series Device. Sepam Series can now be found in Ports (COM & LPT) folder:

5 In this case, Windows has assigned COM7 COM port to Sepam Series Device. USB driver is fully installed and COM7 can now be used to work with SFT2841 software. 4 ) CHANGE OF COM PORT NUMBER If COM Port number assigned by Windows doesn t suit to you, you can modify it by yourself.

6 In this example, Sepam has been assigned by default to Com7. It is possible to change the assignment by double clicking the Sepam Series to open the driver properties, then opening the "Port Settings" tab: You can now click on "Advanced " button and change the Com port number to any other one except one really used (Com 1 for example if the computer has a SubD9 connector).

7 Be advised that Windows displays each Com number that has been used at least one time as "(in use)". So if you know that a Comx is effectively not currently used you can re-use it. The drawback of using an 'in use" number is that you may encounter trouble if the device assigned to this number is connected again and simultaneously with a Sepam. Example: Com port number re-assigned to Com2

8 In order to check the change is operational, open the Device Manager again, use "Action" menu and item "Scan for hardware change" (this manual operation is also used to force the computer to detect the Sepam if the automatic detection didn't work). When the list is refreshed, check the Com number is the desired one.

9 At this step, although it's not always necessary, it is advised to restart the computer otherwise the dialog with Sepam may not work.

10 5 ) CHECKING WHICH COM PORT WAS ASSIGNED When the driver is installed, windows automatically assign the Sepam to a com port number. In order to know which port to use, you have to check it on device manager. Open the control panel: click on "start" button, in the menu select "control panel"

11 The control panel can have at least 2 different presentations, but at the end you have to select "System": In System Properties, select the hardware tab, then click "Device Manager" button:

12

13 When you're inside the Device Manager, look for "Port(Com & LPT). You should find an entry identified as "Sepam Series (comx)".

14 In this example, Sepam has been assigned by default to Com7. It is possible to change the assignment by double clicking the Sepam Series to open the driver properties, then opening the "Port Settings" tab: You can now click on "Advanced " button and change the Com port number to any other one except one really used (Com 1 for example if the computer has a SubD9 connector).

15 Be advised that Windows displays each Com number that has been used at least one time as "(in use)". So if you know that a Comx is effectively not currently used you can re-use it. The drawback of using an 'in use" number is that you may encounter trouble if the device assigned to this number is connected again and simultaneously with a Sepam. Example: Com port number re-assigned to Com2

16 In order to check the change is operational, open the Device Manager again, use "Action" menu and item "Scan for hardware change" (this manual operation is also used to force the computer to detect the Sepam if the automatic detection didn't work). When the list is refreshed, check the Com number is the desired one. Last important notice: Sepam must be connected to computer before starting SFT2841 otherwise the Com port number will not be available in SFT2841 list

Select Correct USB Driver

Select Correct USB Driver Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications

More information

USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS

USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS. For. Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS USA MOBILITY CABLE CONNECTION AND SOFTWARE DRIVER INSTALLATION INSTRUCTIONS For Unication M90 Device USB To RS232 Adapter TABLE OF CONTENTS SECTION 1: ADAPTER CABLE CONNECTION INSTRUCTIONS... 2 SECTION

More information

MonitorKey USB Driver Installation Instructions

MonitorKey USB Driver Installation Instructions MonitorKey USB Driver Installation Instructions The following procedure is used to install the drivers for the USB port of the EDI MonitorKey Programming Tool. If a serial version of the MonitorKey Programming

More information

Installing PowerLink on Windows 7 64-bit

Installing PowerLink on Windows 7 64-bit Instruction Manual Version 1.0, Code No. 20 751 806 1 Introduction... 3 2 Installing Virtual PC... 3 3 Configuring Windows XP Mode... 5 4 Installing Powerlink to Virtual XP... 8 5 Run PowerLink software

More information

Midland BT Updater BTUpdater Program Program file (x86) ), Midland

Midland BT Updater BTUpdater Program Program file (x86) ), Midland Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed

More information

How to check / reassign USB COM ports: Windows XP/ 2000

How to check / reassign USB COM ports: Windows XP/ 2000 How to check / reassign USB COM ports: Windows XP/ 2000 Overview Even after the USB driver has apparently been installed correctly, you may find that your computer still cannot establish communications

More information

Supplemental USB Driver Installation Guide

Supplemental USB Driver Installation Guide Windows 2000/XP/Vista/7 Installation Supplemental USB Driver Installation Guide 1) Do not plug in your Auterra USB OBD Adapter until after the driver is installed. 2) The USB driver is located on the your

More information

Windows XP Home Edition / Windows XP Professional

Windows XP Home Edition / Windows XP Professional Windows XP Home Edition / Windows XP Professional COOLPIX5000/995/885/775 This manual is for those users of the COOLPIX5000/995/885/ 775 who are running Nikon View 4 (Version4.3.1) under Windows XP Home

More information

Navigator Installation

Navigator Installation Driver Installation Windows XP & Vista When a USB device is plugged into a Windows computer for the first time, the operating system sees that new devices are present on the USB and goes through a process

More information

SAPIP GUI INSTALLATION. Table of Contents

SAPIP GUI INSTALLATION. Table of Contents QUICK START GUIDE SAPIP GUI INSTALLATION Table of Contents 1. Install CSU cable driver for SapIP..2-3 2. Check for pre-requisite for SAPIP GUI install......2 3. Check for pre-requisite for SAPIP GUI install...2-6

More information

Windows XP.. ELITE Firmware Update procedures.. v1.41

Windows XP.. ELITE Firmware Update procedures.. v1.41 Windows XP.. ELITE Firmware Update procedures.. v1.41 Download and Extract the ELITE update. Note.. Please ensure you are logged in to Windows as an Administrator before carrying out the instructions in

More information

USB Driver Installation for Windows XP

USB Driver Installation for Windows XP USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from

More information

Doc. no.lec-om05101. PRODUCT NAME Controller setting kit install manual (bundled with CD-ROM) MODEL/ Series LEC-W2

Doc. no.lec-om05101. PRODUCT NAME Controller setting kit install manual (bundled with CD-ROM) MODEL/ Series LEC-W2 Doc. no.lec-om05101 PRODUCT NAME Controller setting kit install manual (bundled with CD-ROM) MODEL/ Series LEC-W2 LEC-W2 procedure for installing driver and software 0. Preparation Prepare the following

More information

Installing Global Logger USB Drivers

Installing Global Logger USB Drivers Installing Global Logger USB Drivers For 32-bit Windows 8, skip to the section labeled, Continue with Driver Installation. For 64-bit Windows 8, start the process here. At the time of this writing, the

More information

CANON FAX L360 SOFTWARE MANUAL

CANON FAX L360 SOFTWARE MANUAL CANON FAX L360 SOFTWARE MANUAL Before You Begin the Installation: a Checklist 2 To ensure a smooth and successful installation, take some time before you begin to plan and prepare for the installation

More information

Guide to Installing BBL Crystal MIND on Windows 7

Guide to Installing BBL Crystal MIND on Windows 7 Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP

More information

ScanWin Installation and Windows 7-64 bit operating system

ScanWin Installation and Windows 7-64 bit operating system ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,

More information

Running the R4 Software on a USB Port

Running the R4 Software on a USB Port Tech Note Running the R4 Software on a USB Port Like a lot of other engine management software programs that have been around for a while, the R4 program is designed to communicate through a 9-pin serial

More information

Installing the Gerber P2C Plotter USB Driver

Installing the Gerber P2C Plotter USB Driver Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing

More information

XConsole GUI setup communication manual September 2010.

XConsole GUI setup communication manual September 2010. XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT

More information

PCLinq2 Hi-Speed USB Bridge-Network Cable. Quick Network Setup Guide

PCLinq2 Hi-Speed USB Bridge-Network Cable. Quick Network Setup Guide PCLinq2 Hi-Speed USB Bridge-Network Cable Congratulations! Quick Network Setup Guide For Windows 98/ME/2000/XP Congratulations for installing the PCLinq2 Hi-Speed USB Bridge-Network Cable. This Quick Network

More information

Connecting your Omega/BetaPAT PLUS to a PC via a USB

Connecting your Omega/BetaPAT PLUS to a PC via a USB Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the

More information

Table of Contents Install a Printer Driver... 2 Print a Test Label... 9 Uninstall a Printer and Driver... 10

Table of Contents Install a Printer Driver... 2 Print a Test Label... 9 Uninstall a Printer and Driver... 10 Table of Contents Install a Printer Driver... 2 Print a Test Label... 9 Uninstall a Printer and Driver... 10 Copyright 2016, United Parcel Service of America, Inc. All rights reserved. 1 Install a Printer

More information

Transferring Scans from your Dolphin into Destiny

Transferring Scans from your Dolphin into Destiny Transferring Scans from your Dolphin into Destiny Summary: This article is intended to provide Destiny users with an overview of the following tasks 1. Downloading the Dolphin Transfer Utility to their

More information

Targus USB Port Adapter USER S GUIDE. Making Your Mobile Life Easier. Making Your Mobile Life Easier.

Targus USB Port Adapter USER S GUIDE. Making Your Mobile Life Easier. Making Your Mobile Life Easier. Targus USB Port Adapter Making Your Mobile Life Easier. Visit our Web site at: www.targus.com Features and specifications are subject to change without notice. 2002 Targus Corp. 400-0066-001A USER S GUIDE

More information

Schneider OS-Loader usage via Ethernet or USB.

Schneider OS-Loader usage via Ethernet or USB. LHC Gas Systems 28 th February, 2007 Schneider OS-Loader usage via Ethernet or USB. Jacques ROCHEZ - IT/CO/FE Abstract This document is a guideline on how to configure correctly a PC for the use of the

More information

Title: ZOLL USB Direct Connect Cable Installation Instructions

Title: ZOLL USB Direct Connect Cable Installation Instructions ZOLL USB Direct Connect Cable Installation Instructions Document Status: Released Document #: 48x126-ZOLL-003 Page 1 of 7 Revision History DATE REV REASON January 9, 2008 A Initial Release August 12, 2008

More information

PP8X Printer Driver Installation Instruction

PP8X Printer Driver Installation Instruction PP8X Printer Driver Installation Instruction Pinnacle Technology Corp. CONTENTS 1 BT Device Installation... 1 2 Printer Driver Installation... 6 3 How to Know the Connecting Port... 10 4 How to Configure

More information

Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges

Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges Using the Communication Ports on the DG-700 and DG-500 Digital Pressure Gauges 1. USB and Serial Communication Ports: Newer DG-700 and DG-500 gauges contain both a USB and a DB-9 Serial Communication Port,

More information

USB Driver. Installation Manual

USB Driver. Installation Manual USB Driver Installation Manual Issue 1.00 Detailed guide for the installation of Actisense USB Drivers under the following operating systems: Windows XP / 2000 Windows Vista USB Driver Installation Manual

More information

IrDA-USB IrDA USB Adapter

IrDA-USB IrDA USB Adapter IrDA-USB IrDA USB Adapter The IrDA USB Adapter enables infrared wireless data communication through your PC s USB port. No IRQ, DMA settings nor configurations, the IrDA USB Adapter is much better than

More information

KI6501 Data Manager. Software User Manual

KI6501 Data Manager. Software User Manual KI6501 Data Manager Software User Manual CONTENTS 1. Installation of USB Virtual COM Port driver software... 2 2. Installation of KI6501 Manager Software... 2 3. Connecting KI6501 to PC (Personal Computer)

More information

Blastmate III and Minimate Plus USB to PC Cable (Part No. 716A3401)

Blastmate III and Minimate Plus USB to PC Cable (Part No. 716A3401) Purpose This technical bulletin describes the installation of the Blastmate III and Minimate Plus USB to PC Cable (Part No. 716A3401). Refer to Image A. This cable allows the Blastmate III and Minimate

More information

BUSINESS SOFTWARE SOLUTIONS. Business Software Solutions Error Troubleshooting

BUSINESS SOFTWARE SOLUTIONS. Business Software Solutions Error Troubleshooting BUSINESS SOFTWARE SOLUTIONS Business Software Solutions Error Troubleshooting Contents Preventative Maintenance... 3 Backup Your BPA Software... 3 Posting Sales... 4 Anti-Virus/Anti-Spyware... 4 Index

More information

Installation of USB Virtual COM. Version 1.02

Installation of USB Virtual COM. Version 1.02 Installation of USB Virtual COM Version 1.02 RELEASE NOTES Version Date Notes 1.02 May 13, 2014 Modified: Install USB Virtual COM Drivers files on CD updated 1.01 Dec. 10, 2009 Supports driver for Windows

More information

To get times into Arena Managemnt program, from the Farm Tek Timer Console.

To get times into Arena Managemnt program, from the Farm Tek Timer Console. To get times into Arena Managemnt program, from the Farm Tek Timer Console. You will need to purchase from Farm Tek the Computer Interface Cable, and a USB to Serial adapter id your computer does not have

More information

Installing S500 Power Monitor Software and LabVIEW Run-time Engine

Installing S500 Power Monitor Software and LabVIEW Run-time Engine EigenLight S500 Power Monitor Software Manual Software Installation... 1 Installing S500 Power Monitor Software and LabVIEW Run-time Engine... 1 Install Drivers for Windows XP... 4 Install VISA run-time...

More information

Windows 8 Installation Instructions for the PR3. STOP! Read these instructions before connecting the PR-3 to your Computer

Windows 8 Installation Instructions for the PR3. STOP! Read these instructions before connecting the PR-3 to your Computer Windows 8 Installation Instructions for the PR3 Required equipment: PR3 Installation CD or downloaded and extracted PR3 files from www.digitrax.com/downloads (PR3 Windows XP and Vista Drivers) USB Cable

More information

USB DRIVER INSTALLATION GUIDE

USB DRIVER INSTALLATION GUIDE USB DRIVER INSTALLATION GUIDE Please read this installation guide before installing the USB driver. This installation guide describes how to install the USB driver included in the Icom product s CD. If

More information

Remote Monitoring and Control of the R&S FSL with a Web Browser

Remote Monitoring and Control of the R&S FSL with a Web Browser Rohde & Schwarz Products: R&S FSL3, R&S FSL6, R&S FSL18 Remote Monitoring and Control of the R&S FSL with a Web Browser Application Note This application notes describes remote operation or monitoring

More information

Installation Manual LATC-W1

Installation Manual LATC-W1 Installation Manual PRODUCT NAME Controller Setting Software MODEL / Series / Product Number LATC-W1 [Before using this product] Read the "End-User License Agreement" shown on the next page carefully and

More information

LabVIEW Remote Pump Control for USB Controller

LabVIEW Remote Pump Control for USB Controller LabVIEW Remote Pump Control for USB Controller Syringe Pump Technical Bulletin TB39 Overview The current Teledyne Isco D-Series USB pump controllers (identification number 62-1240-114 and higher) can be

More information

Elite and elink Driver Installation

Elite and elink Driver Installation Elite and elink Driver Installation For Hornby DCC Controllers (Revision May 2013) Copyright 2013 by Invicto Systems Limited. All rights reserved. Preface With the increasing number of different versions

More information

Installing the IF-NMEASC & SC30 Windows XP Drivers & Software

Installing the IF-NMEASC & SC30 Windows XP Drivers & Software Installing the IF-NMEASC & SC30 Windows XP Drivers & Software The following document will outline the installation and use of the IF-NMEASC and SC-30 USB drivers and SC-30Tool software in three parts:

More information

SCU-18 PC Connection Cable Driver Installation Manual

SCU-18 PC Connection Cable Driver Installation Manual SCU-18 PC Connection Cable Driver Installation Manual Installing the SCU-18 PC Connection Cable driver software on a computer makes possible data transmission and updating the transceiver firmware. Please

More information

1. Introduction... 1. Under Windows 98SE... 2. Under Windows ME... 6. Under Windows 2000... 10. Under Windows XP... 13. Under Windows Vista...

1. Introduction... 1. Under Windows 98SE... 2. Under Windows ME... 6. Under Windows 2000... 10. Under Windows XP... 13. Under Windows Vista... Index 1. Introduction... 1 2. Installation of USB to Serial Converter Under Windows 98SE... 2 3. Installation of USB to Serial Converter Under Windows ME.... 6 4. Installation of USB to Serial Converter

More information

Iridium Extreme TM Satellite Phone. Data Services Manual

Iridium Extreme TM Satellite Phone. Data Services Manual Iridium Extreme TM Satellite Phone Data Services Manual Table of Contents 1 OVERVIEW... 1 2 HOW IT WORKS... 1 3 BEFORE INSTALLING... 2 4 USB DRIVER INSTALLATION... 3 5 MODEM INSTALLATION AND CONFIGURATION...

More information

EDMS Operation Manual. 1. Install the USB Driver. 1.3 Click next

EDMS Operation Manual. 1. Install the USB Driver. 1.3 Click next EDMS Operation Manual 1. Install the USB Driver 1.1 If this is your first time using the gauge, when you connect the gauge to the PC, a driver installation window may appear or the driver will install

More information

USB 3.0 to Gigabit Ethernet Adapter

USB 3.0 to Gigabit Ethernet Adapter USB 3.0 to Gigabit Ethernet Adapter User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3

More information

Business Plus Accounting Hardware Setup Guide For Windows XP

Business Plus Accounting Hardware Setup Guide For Windows XP Business Plus Accounting Hardware Setup Guide For Windows XP 1 Contents Chapter 1 - Description of Computer Ports...3 Chapter 2 - Connecting Your Touch Screen...4 Chapter 3 Setting Up Your Printers In

More information

USB DRIVER INSTALLATION GUIDE

USB DRIVER INSTALLATION GUIDE USB DRIVER INSTALLATION GUIDE Thank you for using the Icom Download Service. Please read this installation guide before installing the USB driver into your PC that is connected to the USB (Universal Serial

More information

How to install USB driver (MICRO/I)

How to install USB driver (MICRO/I) How to install USB driver (MICRO/I) Install on Windows XP 1. Connect the USB port on HG3G series and the USB port on PC. 2. Windows displays Found new Hardware Wizard. Select No, not this time and press

More information

AUDITVIEW USER INSTRUCTIONS

AUDITVIEW USER INSTRUCTIONS The AuditGard AuditView software allows the Manager to view, save, and print the audit records. The AuditGard lock maintains the last 512 lock events in non-volatile memory. Accessing the audit records

More information

Application Note: Connecting to a 2500 Series Processor using PLC Workshop

Application Note: Connecting to a 2500 Series Processor using PLC Workshop Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The

More information

Remote Monitoring and Control of the R&S FSV with a Web Browser

Remote Monitoring and Control of the R&S FSV with a Web Browser Rohde & Schwarz Products: R&S FSV3, R&S FSV7, R&S FSV13, R&S FSV30 Remote Monitoring and Control of the R&S FSV with a Web Browser Application Note This application note describes remote operation or monitoring

More information

Connecting Your Camera under Windows XP

Connecting Your Camera under Windows XP Running Nikon View 4 under Windows XP (Home Edition/Professional) Installing Nikon View 4 Step 2 For information on installing Nikon View 4, see the Nikon View 4 Installation Click System to open the System

More information

Installing USB Drivers With Microsoft Windows XP

Installing USB Drivers With Microsoft Windows XP Installing USB Drivers With Microsoft Windows XP Legal Notice No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any computer language,

More information

1. How to install CDM driver on PC for Lambda devices

1. How to install CDM driver on PC for Lambda devices 1. How to install CDM driver on PC for Lambda devices This installation guide is based on Window XP. Different systems may require different actions on some steps. All Lambda devices (Lambda 10-3, 10B,

More information

Instructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity.

Instructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity. The simple and reliable way to measure radioactivity. Instructions for the installation of drivers and data reading software (TOOLBOX 4) EN 06/2015 2015 GAMMA-SCOUT GmbH & Co. KG Instructions for Driver

More information

BioWin Network Installation

BioWin Network Installation BioWin Network Installation Introduction This document outlines the procedures for installing the network version of BioWin. There are three parts to the network version installation: 1. The installation

More information

Metasys System Direct Connection and Dial-Up Connection Application Note

Metasys System Direct Connection and Dial-Up Connection Application Note Metasys System Direct Connection and Dial-Up Connection Application Note Code No. LIT-1201639 Software Release 5.1 Issued August 27, 2013 Supersedes October 4 2010 Refer to the QuickLIT website for the

More information

CONTENTS INTRODUCTION...1

CONTENTS INTRODUCTION...1 CONTENTS INTRODUCTION...1 Driver Installation...3 Windows 98SE... 3 Windows ME/2000/XP...11 Make Sure Installation Successfully...15 Windows 98SE/ME... 15 Windows 2000/XP... 16 Driver Un-installation...17

More information

USB VoIP Phone Adapter. User s Manual

USB VoIP Phone Adapter. User s Manual USB VoIP Phone Adapter User s Manual FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 68 of the FCC Rules.

More information

USB TO SERIAL CONVERTER

USB TO SERIAL CONVERTER USB TO SERIAL CONVERTER User Manual (DA-70155-1) Index: A. Windows Driver B. MAC Driver C. Linux Driver A. Windows Driver 1. Product Features 2. System Requirements 3. Driver Installation (Win2000) 4.

More information

Application Note CTAN #374

Application Note CTAN #374 Application Note CTAN #374 The Application Note is specific to the CT software packages MentorSoft, UniSoft and SeSoft Windows 7 64-bit and the Older CT Software Scope Windows 7 64-bit Professional 64-bit

More information

USB DRIVER INSTALLATION GUIDE

USB DRIVER INSTALLATION GUIDE USB DRIVER INSTALLATION GUIDE For Windows 8 Please read this installation guide before installing the USB driver. This installation guide describes how to install the USB driver included in the Icom product

More information

FACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000

FACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000 FACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000 With regard to the supply of products, the current issue of the following document is applicable: The General

More information

Installation of the USB to RS 485 Converter

Installation of the USB to RS 485 Converter Installation of the USB to RS 485 Converter Contents CONTENTS 1 GENERAL INSTRUCTIONS 1 HINT 1 INSTALLATION USING SETUP EXECUTABLE (RECOMMENDED INSTALLATION PROCEDURE) 2 INSTALLATION BY PLUGGING IN THE

More information

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers 41 Vine Street Magill SA 5072 Phone: 08 8332 9044 Fax: 08 8332 9577 mea@mea.com.au Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor

More information

1. Driver Installation... 3

1. Driver Installation... 3 Version 1.2 11-2005, Email: info@acs.com.hk Website: www.acs.com.hk Contents 1. Driver Installation... 3 1.1 Driver Auto-Download (with Internet Connection)... 3 1.2 Microsoft Windows Update... 5 1.3 Windows

More information

Table of Contents. 1. Overview... 3. 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3. 2. Installation Instructions..

Table of Contents. 1. Overview... 3. 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3. 2. Installation Instructions.. Table of Contents 1. Overview..... 3 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3 2. Installation Instructions.. 4 2.1 Installing the On Call Diabetes Management Software. 4 2.2

More information

USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6

USER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly

More information

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers

Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers Measured by Experience Installation Notes for Prolific PL-2303 USB Driver for USB - RS232 Adaptor Cable 1. Uninstall Existing USB-Serial Adaptor Drivers Uninstall any existing USB-RS232 drivers before

More information

DUKANE Intelligent Assembly Solutions

DUKANE Intelligent Assembly Solutions PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc

More information

VBOX-Plus Configuration Tool

VBOX-Plus Configuration Tool Version 1.0 October 2012 VBOX-Plus Configuration Tool Table of Contents System Requirements Program Installation Connecting to the VBOX-Plus Gateway System Configuration Resetting to Factory Default Registering

More information

3. USB DRIVER. 3-1. Installation of USB driver. 3-1-1. Driver for Infinity SD Data Logger. INFINITY Series Acquisition Tools Manual

3. USB DRIVER. 3-1. Installation of USB driver. 3-1-1. Driver for Infinity SD Data Logger. INFINITY Series Acquisition Tools Manual 3. USB DRIVER 3-1. Installation of USB driver Before you launch this software, the driver should be once surely registered. Access between the instrument and a PC through the USB cable supplied by us as

More information

Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software

Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software 27 March 2015 Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software Introduction This guide will walk you through the process of transferring data from the FOCUS DL-15 to the computer

More information

Driver Installation for Windows XP Home Edition and Windows XP Professional

Driver Installation for Windows XP Home Edition and Windows XP Professional Driver Installation for Windows XP Home Edition and Windows XP Professional Note: This guide is intended as an installation guide for all of Adaptec's USB 2.0 Drivers. The snapshots and text may refer

More information

Centurion PLUS CPC4 Download Guide

Centurion PLUS CPC4 Download Guide Centurion PLUS CPC4 Download Guide using C4 File Transfer Utility. 1010537 03 01 10 Section 50 1.0 Background: 1.1 The Centurion PLUS Control system consists of a Centurion PLUS Core (CPC4 1) and Color

More information

Pass-Through Function Guide. 1 General Description... 2 2 Install... 6 3 Setting... 13 4 Error Messages... 19 5 Appendix... 20

Pass-Through Function Guide. 1 General Description... 2 2 Install... 6 3 Setting... 13 4 Error Messages... 19 5 Appendix... 20 Pass-Through Function Guide 1 General Description... 2 2 Install... 6 3 Setting... 13 4 Error Messages... 19 5 Appendix... 20 1 1 General Description 1.1 What is the Pass-Through Function? When communicating

More information

Centurion C4 Transfer Guide using C4 File Transfer Utility

Centurion C4 Transfer Guide using C4 File Transfer Utility Centurion C4 Transfer Guide using C4 File Transfer Utility 1010536 02 23 11 Section 50 1.0 Background: 1.1 A valid configuration is required for the Centurion system. Configuration files are downloaded

More information

HP-1000 Powerline USB Adapter

HP-1000 Powerline USB Adapter HP-1000 Powerline USB Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.

More information

RAID Option Installation

RAID Option Installation RAID Option Installation Introduction RAID option is a PCI board including two HDD. The RAID option installation is carried out in 4 main phases: Pase A: Hardware installation Phase B: Configuration of

More information

Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101

Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101 Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101 Z Technology Application Note No: 40 This application note outlines the simple process of installing and using

More information

VISIONEER USB IN 1 CARD READER/WRITER USER MANUAL

VISIONEER USB IN 1 CARD READER/WRITER USER MANUAL VISIONEER USB 2.0 12 IN 1 CARD READER/WRITER USER MANUAL INDEX Trademarks --------------------------------------------------------------------- 2 Introduction --------------------------------------------------------------------

More information

PL-2303 USB to Serial Adapter User Installation Manual

PL-2303 USB to Serial Adapter User Installation Manual PL-2303 USB to Serial Adapter User Installation Manual (For Vendor Reference Only) For Windows 98/ME/2000/XP Release Version 1.0 (4/08/2002) Contents Introduction Features & Specifications System Requirements

More information

To perform Ethernet setup and communication verification, first perform RS232 setup and communication verification:

To perform Ethernet setup and communication verification, first perform RS232 setup and communication verification: PURPOSE Verify that communication is established for the following products programming option (488.2 compliant, SCPI only): DCS - M9C & DCS M130, DLM M9E & DLM-M9G & DLM M130, DHP - M9D, P series, SG,

More information

Oven Software Installation for Windows XP (HC1 or HC2 controller) (Software version 4.0.x.x)

Oven Software Installation for Windows XP (HC1 or HC2 controller) (Software version 4.0.x.x) Basic System requirement: OS: Windows XP (Home or Professional) Processor speed: preferred 2GHz or more RAM: 256MB minimum Communication using: For HC1-x controller: Serial Com port-1 (built-in to computer

More information

HP-1000 Powerline Ethernet Adapter

HP-1000 Powerline Ethernet Adapter HP-1000 Powerline Ethernet Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.

More information

IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1

IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Manual IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Supplement connecting USB RF-II Base Station 1213 2 Contents Contents... 3 Connecting the RF-II Base Station to the USB port... 4 Using the

More information

Communication with BushingGard using computer USB port

Communication with BushingGard using computer USB port Communication with BushingGard using computer USB port There are two ways of communication with BushingGard through computer USB port: Direct communication between computer USB port and BushingGard USB

More information

NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT.

NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. INLINE 5 Software INSTALL BULLETIN Page 2: Installing INLINE 5 Page 6: Removing INLINE 5 NOTE: PLEASE DO NOT ATTEMPT TO INSTALL THE SOFTWARE BEFORE READING THIS DOCUMENT. IMPROPER INSTALLATION OR USE CAN

More information

Data Logging Software and Cable Bundle Model DL-SC3 User Manual. Overview

Data Logging Software and Cable Bundle Model DL-SC3 User Manual. Overview Data Logging Software and Cable Bundle Model DL-SC3 User Manual Overview Eco Sensors Digital Products are capable of transmitting data to a computer via an RS-232 serial connection. Eco Sensors DL-SC3

More information

BASLER ACE QUICK INSTALLATION GUIDE

BASLER ACE QUICK INSTALLATION GUIDE BASLER ACE QUICK INSTALLATION GUIDE Rev. 01 Quick installation Guide V1 1 Introduction The installation procedures in this guide assume that you want to get your camera operational and begin capturing

More information

Installing ABACUS ELECTRICS USB Optical Probes under Windows 7

Installing ABACUS ELECTRICS USB Optical Probes under Windows 7 Installing ABACUS ELECTRICS USB Optical Probes under Windows 7 AN17a This note assumes that you are installing the drivers on to a clean system, i.e. one on which ABACUS ELECTRICS Optical Probe drivers

More information

1. TIB388 about the Windows compatibility of all Mutoh devices subdivided in

1. TIB388 about the Windows compatibility of all Mutoh devices subdivided in WINDOWS Windows compatibility COMPATIBILITY overview OVERVIEW Dear Customer, The questions are rising regarding the compatibility of our Mutoh products with Windows 7. We would like to take the advantage

More information

Microlog Series Module Manager and Firmware Install Procedure

Microlog Series Module Manager and Firmware Install Procedure Microlog Series Module Manager and Firmware Install Procedure This document details important module management information and firmware installation instructions not described in the product user manual.

More information

Installation Instructions

Installation Instructions Installation Instructions Windows USB driver for Installation If a Diagnostic Interface with USB is connected to a PC with a Windows operating system 98, ME, XP or Vista for the first time, it is necessary

More information

UX3600/NT/NTL/NTS Quick Start Guide This Quick Start Guide will explain how to connect and communicate with the EAW UX3600, NTL720, NTS250, KFNT, and JFNT powered speakers. Table of Contents 1. Downloading

More information

User Manual (DA-70155)

User Manual (DA-70155) USB TO SERIAL CONVERTER User Manual (DA-70155) Index: A. USB-Serial Cable B. USB-Serial Converter C. How driver works with Modem on Linux RedHat 7.3 A. USB-Serial Cable 1. Product Features 2. System Requirements

More information