FOR SALE. Used precast- and factory equipment. February complete concrete block production factory
|
|
- Gyles Gray
- 7 years ago
- Views:
Transcription
1 FOR SALE Used precast- and factory equipment - complete concrete block production factory - hydraulic tilting table - concrete block travellers and auxiliary machines February
2 complete concrete block production factory incl. concrete mixing plant Pos 1 SCHLOSSER VABH3 year of construction: 1980 / 1992 moulds approx. 16 pieces: for concrete blocks for lightweight concrete blocks stone sizes from d = 11 cm up to 36 cm transportation- and handlingsystem: 2 stacker cranes in gantry construction 2 concrete stone- transportation tongs automatic concrete mixing plant: SCHLOSSER MW 1000 / 750 output: 750 l planetary compulsory mixer 2
3 hydraulic tilting table Pos 2 AVERMANN year of construction: approx surface: steel, plain dimensions: lengh: approx. 12,00 m width: approx. 2,86 m lateral shuttering: hight: approx. 20 cm internal hydraulic aggregate vibrator control frequency adjustable vibrators: man. BOSCH 6 x available heavy load trailer Pos 3 MAFI / PLAN year of construction: approx capacity: 10,0-20,0 to dimensions: approx. 2,5 x 6,0 m wheels: hard rubber, condition 80 % 6 x available 3www.transcontec.com
4 concrete block travellers and auxiliary machines consisting of: block making machine (rail guided) 2 x available Pos 4 ZENITH 913 KII SV A year of construction: 1998 / 1990 working width: approx. 1,20 m max. silo fill height : mm max. stone height: 480 mm travel speed - forward: 30 cm / s travel speed - backwards: 50 cm / s span: approx mm total weight: approx. 5,1 to concrete loader for block making machine Pos 4.1 capacity: max. loading: max. total weight: ZENITH 4 RHN approx. 1,0 m approx kg approx kg 3 forklift incl. hydraulic stone tongs Pos 4.2 lifting capacity: lifting hight: incl. hydraulic stone tongs TOYOTA 02-5FD-33 approx. 3,5 to mm moulds for block making machine Pos 4.3 ZENITH chimney stone hollow - block stone multiplayer - concrete stone 4
5 automatic pallet circulation system for the production of filigree floor slabs* AVERMANN year of construction: ca performance: element floor slabs / filigree floor slabs consisting of the following main components: *Sale of single components possible! 4 pallets; dim. 15,00 x 2,40 m (inside dimension); steel surface, plain in good condition circulation technique consisting of friction gears, rolls, transverse traveller, etc. complete drying shelf/hardening chamber 40 places automatic shelf operating device vibration station for concrete compacting automatic plotter and measuring device rail guided hydraulic concrete distributer incl. porcupine roller cleaning- station for pallets oiling- station for pallets complete control: man. SIEMENS S5 Pos 5 circulation pallet concrete distributor oiling - station cleaning - station paletts in the shelf plotter device drying shelf / hardening chamber 5www.transcontec.com
6 automatic concrete mixing plant incl. automatic scraper device Pos 6 SCHLOSSER year of construction: approx SM 1500 / capacity: approx. 20 m / h output: l humidity sensor cement silo: approx. 40 to automatic scraper device: man. GECO; type: GAD 16 automatic concrete mixing plant incl. automatic scraper device Pos 7 ELBA year of construction: approx EMS 750 B 3 capacity: approx. 20 m / h output: cement silo: 2 pieces automatic scraper device: control: 750 l approx. 30 to / 50 to man. ELBA SIEMENS S5 6
7 multifunctional production line for filigree floors incl. concrete spreader, plotter, cleaning, oiling device Pos 8 length: operating width: lateral shuttering: steel panel: AVERMANN approx. 125 m approx. 2,40 m approx. 7 cm good condition incl.. concrete spreader incl. plotter incl. cleaning- / oiling device incl. 2 x trailers double girder bridge crane DEMAG / FISSENEWERT year of construction: approx lifting capacity: approx. 10,0 to / 5,0 to span width: approx mm hook path: approx mm Pos 9 2 x available 7www.transcontec.com
8 automatic concrete mixing plant Pos 10 SCHLOSSER year of construction: approx / 1996 SM 1500 / 1000 output: l cement silo: approx. 40 to humidity sensors 6 - chambers steel silo for aggregates elevator bucket 8
9 automatic straightening and cutting machine with double bending device Pos 11 PROGRESS RTR 16 2 BK year of construction: approx performance: Ø 6,00 16,00 mm automatic double bending device reeling plant 5 reels bar magazine/wire exit lane, length: approx. 8,50 m complete PC- control stamper for spacer to thickness = 30 mm automatic straightening and cutting machine Pos 12 FILZMOSER year of construction: approx: 1994 performance: Ø 6,00 14,00 mm reeling plant: 5 reels wire exit lane, length: approx. 10,00 m hydraulic wire exchange complete PC-control automatic straightening and cutting machine FILZMOSER year of construction: approx performance: Ø 6,00 14,00 mm reeling plant: 4 reels wire exit lane, length: approx. 10,00 m hydraulic wire exchange complete PC-control Pos 13 9www.transcontec.com
10 fully automatic concrete mixing plant Pos 14 ARKON year of construction: approx PM 100 output: 2,00 m³ capacity: approx. 80 m³/h 4 cement silos each approx. 40 m³ incl. concrete screws bucket belt conveyer high power compressor and compressed air system incl. equipment Pos 15 MANNESMANN DEMAG year of construction: approx RA-085 volume flow: 7,9 m³/min. capacity: 45 kw incl. dryer and oil extractor 2 x available spiral stair moulds HOWAL ALPHAPLUS 175 / 270 medium floor height: up to approx. 4,0 m steps: 23 steps minimum thickness: 140 mm approx. width: 1,00 m performance: left and right coiled Pos 16 2 x available 10
11 steel processing machines Pos 17 mesh bending machine: mesh cutting machine: mesh guillotine shear: rebar bending machine: fabr. Bock fabr. Hambi fabr. Hambi fabr. Peddinghaus carpentering machines Pos 18 sliding table saw: vertical panel saw: fabr. HolzHer fabr. Altendorf cross beams Pos 19 lifting capacity: length: Pfeiffer /RINDT 2,5 to to 25,0 to 3,0 m to 10,0 m 11
12 Hope to hear from you soon! Tel: +49 (08462) Purchase You want to change, close down or restructure your production? We can help you to get rid of superflueous dead weight, for any production equipment that isn t used anymore is a loss of your money. Take the opportunity and get your head free. We are constantly looking for used machinery and equipment! Promt payment and a neat and purposeful execution go without saying for us. Our team will be able to respond rapid and flexible to all your wishes / questions. Well-swept clearings in a predefined time-frame are no problem to us. Numerous references prove: We keep our word! Its a pleasure to assist you. Sale Foregoing positions are only an extract of our vast inventory. We have a wide range of well preserved machinery and other equipment for the concrete and prefabricated parts industry. If you need equipment for concrete processing, machinery for carpentry, steel processing or complex huge systems: We ar sure to have what you need in order to optimize your production. Have a look on the premises or ask for a detailed quotation. It is a pleasure to advise and assist you in all matters of dismantling, heavy loads or new conceptions of your production. Just ask us! We have experienced mounting teams of our own and may resort to a grown network of associated firms.
Offer No: 156/2010. Date: December 17, 2010. Dear gentlemen,
CONSTRUCTION MACHINES PRODUCTION PAGE 1 PROMETAL S.R. Milosava Vlajića 49 11450 Sopot Serbia EUROPE Tel. +381.63.133.44.56 +381.63.8623.758 Fax +381.11.283.41.39 web site: bank: Raiffeisen Bank Serbia
More informationOffer No: 52/2011. Date: August 9, 2011. Dear gentlemen,
CONSTRUCTION MACHINES PRODUCTION PAGE 1 PROMETAL S.R. Milosava Vlajića 49 11450 Sopot Serbia EUROPE Tel. +381.63.133.44.56 +381.63.8623.758 Fax +381.11.283.41.39 web site: bank: Raiffeisen Bank Serbia
More informationBatching and Mixing Plants
Batching and Mixing Plants Technique Strength Results Ready-mix plant with sheeted, square steel in-line bins. Precast and pipe factory with concrete in-line bins and bucket elevator. Individual solutions
More informationPRO. English COMPLETE PRECAST PLANT
PRO English COMPLETE PRECAST PLANT THE WORLD STANDARD FOR PRECAST PRODUCTION THE PRO PLANT Elematic s PRO production lines and machines are especially designed for precasters who need to produce different
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationall VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101
ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.
More informationHanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
More informationEngineered Material Handling. Overhead Bridge Cranes and Gantry Cranes
TM Engineered Material Handling Overhead Bridge Overhead and Gantry Bridge Cranes and Gantry Cranes Custom Engineered Crane Systems Gantry Cranes EMH builds a complete range of gantry cranes including
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationPresentation of. factory at Segmon, Grums municipal.
Presentation of factory at Segmon, Grums municipal. Office building Office building Office building Storehouse Space for annex Preparatory work with plinths for the extension of sheet metal building by
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More informationPALLETS ROLLER CONVEYOR LOADING CONVEYOR CHAIN TRANSFER TURNTABLE ROLLER STOP
AUGUST 12, 2014 INDEX 04 07 04 06 EMITTER REMOVER 07 08 10 12 14 BOXES BELT CONVEYOR BELT CONVEYOR GATE STRAIGHT SPUR CONVEYOR CONVEYOR SCALE 16 17 18 19 20 22 24 26 ALIGNERS WHEEL ALIGNER BRACKET CHUTE
More informationDirective 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
More informationPARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationAMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
More informationCleaning of floor coverings. Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser
Cleaning of floor coverings Vacuum Cleaners Brush-Type Vacuum Cleaners Spray Extractors Single Disc Machines Cleaning Machines - Cleanser 135 7 Cleaning of floor coverings Vacuum Cleaners for Everyday
More informationHamilton Form Company, Ltd Custom Designs, Flexible Solutions
Hamilton Form Company, Ltd Custom Designs, Flexible Solutions 1 IFC 2 CUSTOM DESIGNS, FLEXIBLE SOLUTIONS Hamilton Form has been designing and building custom steel forms for the precast industry since
More informationMore than shelving & racking. All for your storage demands.
More than shelving & racking. All for your storage demands. CONTENTS SELECTIVE PALLET RACKING A cost effective storage system providing direct access to all pallet. SLOTTED ANGLE SHELVING Simple, cost-effective
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationHOW TO LOAD A TRUCK OR A CONTAINER IN 5 MINUTES? www.progecovigo.com
AUTOMATIC LOADING SYSTEMS HOW TO LOAD A TRUCK OR A CONTAINER IN 5 MINUTES? www.progecovigo.com 1 LOADING PLATFORM TYPES ADJUSTABLE HEIGHT PLATFORMS PF-V DESIGNED FOR LOADING OR UNLOADING OF TRUCKS AND
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More information50AI01oe 02/15. Labko GRP cesspools. Instructions for installation, operation and maintenance
02/15 Labko GRP cesspools Instructions for installation, operation and maintenance Reliable solutions Wastewater treatment systems Contents 1 LABKO CESSPOOLS... 3 1.1 GENERAL... 3 1.2 IMPORTANT TO KNOW
More informationSecondhand machinery. Descriptions and pictures are non-binding
Secondhand machinery 10059 Mesh Welding Plant MG210 Year: 1994 Wire mesh width: max. 2500 mm / min. 1000 mm Wire mesh length: max. 6000 mm / min. 2500 mm Line wire spacing: 100, 150, 200 mm Cross wire
More informationAluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
More informationConstruction of precast reinforced concrete structures. Prefabricated reinforced concrete construction:
Construction of precast reinforced concrete structures István VidovszkyPhD definition 2 Prefabricated reinforced concrete construction: Construction of RC components of buildings, the majority of which
More informationThe mechanics finish work on time today...
The mechanics finish work on time today......and the next crane mounting too. Crane component kits by SWF Krantechnik Your mechanics are satisfied. Your customer is satisfied. You are satisfied. And that
More informationAutomated Material Handling and Storage Systems
Automated Material Handling and Storage Systems How do we define automated material handling and storage systems? How do they work? What is automated guided vehicle systems? Automated Material Handling
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationCONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS
CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS High capacity chain bucket elevators BEUMER CONVEYING TECHNOLOGY Bucket elevators
More informationContainer design and types
Container technology can transport mainly piece goods over great distances. The strong container protects good during the transport, the standardized dimensions let them store in well defined stacks and
More informationDirective 2006/42/EC. Classification of equipment used for lifting loads with lifting machinery
1(9) Updated June 2012 Classification of equipment used for lifting loads with lifting machinery This classification was approved by the Machinery ing Group as a basis for a consistent application of the
More informationCompact Air Solutions C Series 2.2 7.5 kw Screw Compressors Want a 5. year warranty? Ask for details!
Compact Air Solutions C Series 2.2 7.5 kw Screw Compressors Want a 5. year warranty? Ask for details! Air. CompressedAir. BogeAir. Now you can! CM compact module 2.2 7.5 kw Effective free air delivery:
More informationTOWER BETON - VERTICAL BATCHING AND MIXING PLANTS CONCRETE BATCHING PLANTS
TOWER BETON - VERTICAL BATCHING AND MIXING PLANTS CONCRETE BATCHING PLANTS TOWER BETON Meeting the demands of customers needs and applying the most modern technology is what SIMEM focused on while designing
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationAssignment in the United Arab Emirates
Friesische Maschinenbau GmbH & Co. KG, 26723 Emden, Germany Assignment in the United Arab Emirates A Frima twin system has been in operation at Fujairah Building Industries in the United Arab Emirates
More informationMAY WE HELP YOU BUNDLE YOUR PRODUCTS?
BUNDLING MACHINES MAY WE HELP YOU BUNDLE YOUR PRODUCTS? BP-700-CVS (+KT-1200) AVC Sealing Solutions is a dynamic company with many years of experience and a clear ambition: to be the best in our market.
More informationThermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
More informationHigh Capacity Hot Air Dryer
High Capacity Hot Air Dryer MADE IN AUSTRIA autumn 2015 www.zimmer-austria.com page 1 Hot air dryer type: Compact HC The modular construction of the high efficiency and powerful hot air nozzle dryer is
More informationMAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
More informationPuddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationFree Stall Cleaner System with Cable. A new generation of equipment and systems. GEA Farm Equipment Houle
Free Stall Cleaner System with Cable A new generation of equipment and systems GEA Farm Equipment Houle engineering for a better world GEA Farm Technologies SW Series Cable Drive Unit A new series of cable
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationOIL-FREE ROTARY SCROLL COMPRESSOR. ECOLIFE 1,5 15 kw
OILFREE ROTARY SCROLL COMPRESSOR ECOLIFE 1, 1 kw EN Why The continuous innovation of the compressed air tools and machineries, the evolution of specific productive processes and uses, require exclusively
More informationGuide to Safety Edge Systems
Guide to Safety Edge Systems Tel: 0845 054 5070 asosafety@egduk.com Guide to Safety Edges All new automatic gate & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 harmonised
More informationThe Complete KASTO Program: Economic Sawing and Storing of Metal.
The Complete KASTO Program: Economic Sawing and Storing of Metal. Expertise right down the line. For over 170 years, KASTO has been recognized for quality and innovation, and offers a complete range of
More informationM E TA L C O N TA I N E R S 90
90 INDUSTRIAL CONTAINERS COLOUR VARIANTS For high capacity can be stacked up to 4 pieces (1+3). Made of moulded reinforced steel or electro-welded mesh 40 x 40 x 4mm. with wire welding in all the points
More informationSteel and composite bridges in Germany State of the Art
Steel and composite bridges in Germany State of the Art Univ.-Prof. Dr.-Ing. G. Hanswille Institute for Steel and Composite Structures University of Wuppertal Germany Univ.-Prof. em. Dr.-Ing. Dr. h.c.
More informationPolishing and finishing barrels BTV
Polishing and finishing barrels BTV Polishing barrels for buttons, products in polyester, urea, galalith and related item. Strengthened model with rubber lining for finishing of metallic minuteness. Steel
More informationSteel mill tumble belt shot blast machines
Steel mill tumble belt shot blast machines Blast machines Second-hand machines Conveyor systems Service and spare parts Steel mill tumble belt shot blast machines are used for deburring, descaling, sand
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationKompressoren. Adsorption Dryer AD
Kompressoren Adsorption Dryer AD Adsorption Drying: why? Modern industries require compressed air that is increasingly filtered with low dew point and condensate. Today, the equipment is more sophisticated
More informationBLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants
BLASTING SYSTEMS Turbine blasting systems Air blasting systems Automatic Painting plants 1, Dust Collector 2, Cyclone Separator 3, Sand (shot) Storage Hopper 4, Bucket elevator 5, Primary separator 6,
More informationAfter reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE
86 :: Certificate in Construction Supervision (CIVIL) 12 ROOF 12.1 INTRODUCTION The structure provided to cover the house surface (floor) is known as roof. For different situation and requirement, it is
More informationCONCRETE PIPES AND MANHOLES
Concrete Plant International www.cpi-worldwide.com AUGUST 20072 CONCRETE PIPES AND MANHOLES Texas-Size Pipe Plant Installed At Hanson Pipe and Precast SPECIAL PRINT CPI 07/02 The Hawkeye Group, Mediapolis
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More informationBolt-on castor set B
12/2010 Original Operating Instructions 999285502 en-gb Please retain for future reference Bolt-on castor set B rt. n 586168000 2008 models onward Basic drawings of product Product description The Bolt-on
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationQUICK BUILD DEMOUNTABLE CONTAINERS & WAREHOUSES. Construct the Quick-Build Container in under 5 minutes!
DEMOUNTABLE CONTAINERS & WAREHOUSES Construct the Quick-Build Container in under 5 minutes! Quick-Build Warehouse, assembly in just a few hours... Quick & Easy! Available to order NOW! build in 15 mins!
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More informationTANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com
TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationCOIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationHS-Steel-Classic. Curing chambers for the concrete block industry in a proven steel version
ANLAGENTECHNIK HS-Steel-Classic Curing chambers for the concrete block industry in a proven steel version + special galvanising + simple assembly due to snap-in connections and building kit system We build
More informationPELLEXIA COMFORT ENVIRONMENT COMPATIBLE
PELLEXIA COMFORT ENVIRONMENT COMPATIBLE To valorize the pellet MODEL nominal output min/max kw global output min/max % pellet reservoir content kg PELLEXIA 7 8 7 8,8 89 50 PELLEXIA 40 3 39,7 85 90,3 50
More informationW E C O N V E Y Q U A L I T Y DISCHARGE SYSTEMS
W E C O N V E Y Q U A L I T Y DISCARGE SYSTEMS W E C O N V E Y ROTARY DISCARGE MACINE TYPE RDM-R The LOUISE Rotating Rotary Discharge Machine (RDM-R) is a central unit to extract difficult bulk material
More informationMemberships. W.F. Welding & Overhead Cranes Ltd. Since 1986. W.F. Welding & Overhead Cranes. 1-200 Ton Overhead Cranes. Jib Cranes.
Memberships Canadian Standards Association (CSA) W.F. is approved by the Canadian Welding Bureau and certified to CSA standard W47.1-03-Division 1. Other memberships include: W.F. Welding & Overhead Cranes
More informationMoscow. Group of Companies. NP - Techno. Beyond the standards. cargo traffic OVERSIZED. heavyweight. bulky SUPER HEAVYWEIGHT
Moscow Group of Companies Beyond the standards cargo traffic OVERSIZED bulky heavyweight SUPER HEAVYWEIGHT History of the Company The NP-Techno Group of Companies - it is a dynamically developing automobile
More informationPORT OF ODENSE & LINDØ INDUSTRIAL PARK STRONG LOGISTICS FACILITY IN NORTHERN EUROPE
PORT OF ODENSE & LINDØ INDUSTRIAL PARK STRONG LOGISTICS FACILITY IN NORTHERN EUROPE 1000 t gantry crane LINDØ port of ODENSE TRANSPORT DIVISION LINDØ port of ODENSE is the home of second-to-none logistics
More informationDough Sheeting, Cutting and Laminating
58 Dough Sheeting, Cutting and Laminating You need a highperformance dough sheeter or want to automate your operations to a greater degree. Our highly productive electronic dough sheeters are ideal for
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationDurmazlar has aimed continous development since 1956
Head Quarter & Ataevler Durmazlar has aimed continous development since 1956 Owes one of the world s most contemporary production plants in the production technology business.3 different plants oriented
More informationUNIVERSAL CLEANERS. Seed Conditioning And Processing Global Solution UNIVERSAL 240
UNIVERSAL CLEANERS Seed Conditioning And Processing Global Solution UNIVERSAL 240 UNIVERSAL EXCELLPRE CLEANERS High Effective Pre-cleaning Performance Akyurek Technology develops and manufactures solutions
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationERIKKILA INDUSTRIAL CRANES
ERIKKILA INDUSTRIAL CRANES Capacity up to 20 000 kg BRIDGE CRANES - Overhead - Under running GANTRY CRANES I-GIRDER JIB CRANES LIFTING BEAMS SERVICE ERIKKILA Reliable lifting for almost 100 years ERIKKILA
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationKALMAR RTG - FOR HIGHER PRODUCTIVITY
KALMAR RTG - FOR HIGHER PRODUCTIVITY Easy operation built in to ensure productivity Ergonomic and productive working environment Good visibility. Easy spotting with stepless controls. All controls for
More informationwww.dreiling-maschinenbau.com Tel.: +49 (0) 36084 / 840-1100 Email: info@dreiling-maschinenbau.com
www.dreiling-maschinenbau.com Tel.: +49 (0) 36084 / 840-1100 Email: info@dreiling-maschinenbau.com Dreiling tool Shuttle system for a heavy duty milling machine (China) Dreiling Technical Data of the System:
More informationHANDLING SYSTEMS SOLUTION
AUTOMATED HANDLING CONTINUOUS HANDLING OF UNIT LOADS LA SOLUTION TRANSITIQUE HANDLING SYSTEMS SOLUTION PALLETS RANGE S pal /// RANGE FOR TRANSPORT OF PALLETS UP TO 1500 KG /// 3 STANDARD WIDTHS ADAPTED
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More information1.2 Advantages and Types of Prestressing
1.2 Advantages and Types of Prestressing This section covers the following topics. Definitions Advantages of Prestressing Limitations of Prestressing Types of Prestressing 1.2.1 Definitions The terms commonly
More informationZakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl
Zakład Metalowy ALEM Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl We as ALEM have many years of experience in processing metals. We offer you a high variety of services in machining, electrical
More informationStair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment
U K S Y S T E M S C A F F O L D Stair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment Why you should use UK System Scaffold Hire UK SYSTEM SCAFFOLD
More informationDEMOLITION Photocopy this profile and distribute it as widely as possible!
Musculoskeletal hazards and controls DEMOLITION Photocopy this profile and distribute it as widely as possible! Musculoskeletal disorders (MSDs), such as chronic back pain or shoulder problems, often take
More informationInstallation PowerPoint for Grasscrete Formers
Installation PowerPoint for Grasscrete Formers 1 This document describes the two single-use tools utilized to create the Grasscrete product. The original Former is a vacuum formed light gauge plastic mold
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationFixed ladders. Fixed ladders. Shaft ladders
Fixed ladders Fixed ladders Fixed ladders are perfect to provide safe and permanent access to buildings, equipment or machines also at great heights, e.g.: + + Ascent for inspection and maintenance work
More information1. HANDLING MACHINES PRODUCTION SERIES BZ Single-column portal / manipulators
1. HANDLING MACHINES PRODUCTION SERIES BZ Single-column portal / manipulators All devices are made on the basis of a large BZ modular system which has matured and continuously been refined over 40 years.
More informationDrum Dispensing Stations
Drum Dispensing Stations O Safely Dispense from 55 Gallon Drums over a Spill Compliant Sump. 1-2-and 4 drum models available Drums are securely held on racks by galvanized positioners Sump and frame constructed
More information8 / 89. Vacuum - Material - Handling
8 / 89 Vacuum - Material - Handling Tube lifter l Tube lifter for universal solutions Pages 8 / 9 VPL 100-230 for loads up to 150 kg Pages 10 / 13 Accessories, Options and Technical Data Pages 14 / 15
More informationFeed systems. Effective handling
Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of automatic wire processing machines operates at high rates of acceleration and speed. This places maximum demands on
More information