Stainless Steel Tubing Fittings & World Leader Since 1976

Transcription

1 Stainless Steel Tubing Fittings & World Leader Since 1976

2 Valex has been a market-leader for decades, developing innovative piping products to meet the needs of our customers ultra-high purity gas systems. Our market is global, and so is Valex, with factories in the US, Korea, and China. We produce a wide range of piping components which meet or exceed the diverse and exacting standards of all customers from the Silicon Valley of California, to the High Tech Parks of Singapore, Korea, Taiwan, and China. enefit from world leadership - choose Valex.

3 Table of Contents VLEX Product Lines Summary of pplications, Materials & Processes DIMENSIONS (STM) Tubing and Corresponding Fittings Coaxial Tubing and Corresponding Fittings SPECIFICTIONS for Ordering (STM) 501 UHP Electropolished Tubing UHP Electropolished Fittings UHP Electropolished Tubing UHP Electropolished Fittings HP Electropolished Tubing Non-Electropolished Tubing & Fittings Non-Electropolished Tubing Hastelloy C-22 Tubing & Fittings DIMENSIONS (JIS) Pipe and Corresponding Fittings SPECIFICTIONS for Ordering (JIS) 401 UHP Electropolished Pipe UHP Electropolished Fittings Non-Electropolished Pipe Non-Electropolished Fittings Non-Electropolished Pipe Non-Electropolished Fittings i

4 Summary of pplications, Materials & Processes PROCESS PRODUCT LINE PPLICTIONS LLOY 1 Ultra-High Purity Systems 501 requiring highest grade of 316L (Special Double Melt) materials and certifications EP 401 Ultra-High Purity Systems 316L (Single or Double Melt) 301 Ultra-High Purity Systems 316L (Single Melt) 201 High Purity Systems 304, 304L and 316L (Single Melt) or P 101 High Purity Systems 304, 304L and 316L (Single Melt) Extremely Corrosive 222 Hastelloy C-22 Systems 2 1. Not all combinations of alloy, surface finish, and sizes are available. Please contact your local Valex representative for details. 2. Please check for Valex specifications and other technical data.

5 I.D. SURFCE FINISH (Ra) 1 1 SIZES VLEX PROCESSES, TESTING, INSPECTION, CERTIFICTION, MRKING, ND PCKGING 5, 7 and 10 µin. (0.13, 0.18 and 0.25 µm) Seamless: 0.25 thru 1.5 in. (6.35 thru 38.1 mm) Per Specification SP , 7 and 10 µin. (0.13, 0.18 and 0.25 µm) Seamless: thru 2.0 in. (3.18 thru 50.8 mm) 8 thru 100 (13.8 thru mm) Welded: 1.0 thru 6.0 in. (25.4 thru mm) 8 thru 250 (13.8 thru mm) Per Specification SP µin. (0.25 µm) Seamless: thru 2.0 in. (3.18 thru 50.8 mm) Welded: 0.5 thru 4.0 in. (12.7 thru mm) Per Specification SP , 20 and 25 µin. (0.38, 0.51 and 0.64 µm) Seamless: thru 2.0 in. (3.18 thru 50.8 mm) 15 thru 100 (21.7 thru mm) Welded: 0.5 thru 6.0 in. (12.7 thru mm) 20 thru 350 (27.2 thru mm) Per Specification SP , 40 and 200 µin. (0.76, 1.0 and 5.1 µm) Seamless: thru 2.0 in. (3.18 thru 50.8 mm) 15 thru 100 (114.3 mm) Welded: 0.5 thru 6.0 in. (12.7 thru mm) 20 thru 500 (27.2 thru mm) Per Specification SP , 24 µin & Mill Finish. (0.51, 0.61 µm and MF) Seamless: 0.25 thru 0.5 in. (6.35 thru 12.7 mm) Welded: 0.5 in. (12.7 mm) Per Specification SP

6 Dimensions (STM) NOTE: ll dimensions are in inches. TUE Weight per Maximum Safe Working Pressure* foot (lbs.) PSI ar Seamless Welded Seamless Welded ,805 N N ,598 N ,189 N ,974 N ,341 N ,136 2, ,759 2, ,039 1, ,340 1, N N N N N N N N.. 30 * Maximum safe working pressure is calculated per SME , Material: T304L or T316L per STM 269 and 632. Temperature Range = -20 F to +300 F, C to C N.. N.. N.. N R 90 ELOW R / / R 45 ELOW R / / EQUL TEE / /

7 REDUCING TEE x /.039 x / x / x / x / x / x / x / x / x / x x / x CONCENTRIC REDUCER x /.039 x / x / x / x / x / x / x / x x x SIZES OTHER THN SHOWN MY E VILLE FROM FCTORY CONCENTRIC REDUCER (SHORT) x /.039 x / x / x / x / END CP / /

8 Dimensions (STM) COXIL TUE Size Weight per Maximum Safe Working Pressure * Inner Outer foot (lbs) PSI ar.250 x x , x x , x x , x x , x x , x x , x x , x x * Maximum safe working pressure is calculated for the outer jacker per SME , (304L/316L, -20 F to 300 F) Weight includes inner and outer tube. COXIL 90 ELOW Inner Tube Inner Tube Outer Tube Outer Tube / / COXIL 45 ELOW Inner Tube Inner Tube Outer Tube Outer Tube / / C COXIL EQUL TEE Inner Tube Inner Tube Outer Tube Outer Tube C / /

9 E D C COXIL REDUCING TEE Inner Inner Inner Inner Outer Outer Outer Outer Tube Tube x Tube Tube Tube Tube x Tube Tube C D E /.039 x / x x / x x / x x / x x / x x x x / x x / x x x x x x x x x COXIL CONCENTRIC REDUCER Inner Tube Inner Tube x Inner Tube Inner Tube Outer Tube Outer Tube x Outer Tube Outer Tube /.039 x / x x / x x / x x / x x / x x x x / x x / x x x x x x / x x / x x x x x x x C FS COXIL PURGE TEE Size Outer Tube Outer Tube C FS

10 Dimensions (STM) D FS 1 C FS 2 COXIL PURGE TEE WITH FCE SEL GLND Inner Inner Outer Outer Tube Tube Tube Tube C D FS 1 FS COXIL SLEEVE C Size C C (E4*) C (E5*) C (E6*) / / / / N / N.. N.. N / N.. N.. N.. * Extra Length FS COXIL FEMLE FCE SEL WELD GLND Size FS FS COXIL MLE FCE SEL WELD GLND Size FS

11 COXIL TERMINTOR Size C C COXIL ULKHED FITTING SSEMLY C Size C Hex Nut Size /4-16UNF /8-14UNF /16-12UNF /16-12UNF /8-12UNF 9

12 Specification 501 UHP Electropolished (STM) TUE PRT NO. - - X4 - - Process T5 Tube, Valex 501 Specification lloy (Per Valex SP-9200) KS Special Double-melt 316L seamless Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length.25 1/4 (6.35mm), 4M length.38 3/8 (9.53mm), 4M length.50 1/2 (12.7mm), 4M length Thickness (0.89mm) (1.00mm) (1.24mm) Visual Characteristics Surface conditions (allowable number and severity of flaws) are coded and with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length tube: T 5 - K S X COXIL TUE PRT NO X4 - Process CT5 Coaxial Tubing, Valex 501 Specification Outer Jacket Type S 316L seamless W 316L welded Inner lloy (Per Valex SP-9200) KS Special double-melt 316L seamless Size () Specify Process (Inner) Tube Size.25 1/4 x.035 inner tube (6.35 x 0.89mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).25M 1/4 x.039 inner tube (6.35 x 1.00mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).38 3/8 x.035 inner tube (9.53 x 0.89mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).38M 3/8 x.039 inner tube (9.53 x 1.00mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).5 1/2 x.049 inner tube (12.7 x 1.24mm) with 3/4 x.065 outer tube (19.05 x 1.65mm) Inner Visual Characteristics Surface conditions (allowable number and severity of flaws) are coded and with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Inner Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max 10 NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length coaxial tube: C T 5 - W - K S -. 5 X4-5

13 FITTINGS PRT NO. G -. X. - Type 2 90 Elbow 2K 45 Elbow 7 Equal Tee 7R Reducing Tee 31 Concentric Reducer 16 End Cap Size ().25 1/4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).38 3/8 x.035 wall (9.53 x 0.89mm).38M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm) Visual Characteristics Surface conditions (allowable number and severity of flaws) are coded and with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: G 7 R -. 5 X COXIL FITTINGS PRT NO. F -. X. - Type 2 90 Elbow 2K 45 Elbow 7 Equal Tee 7R Reducing Tee 31 Concentric Reducer 7PFS Purge Tee with FS 14FS FS Weld Gland, Female 15FS FS Weld Gland, Male Size () Specify Process (Inner) Tube Size.25 1/4 x.035 inner tube (6.35 x 0.89mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).25M 1/4 x.039 inner tube (6.35 x 1.00mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).38 3/8 x.035 inner tube (9.53 x 0.89mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).38M 3/8 x.039 inner tube (9.53 x 1.00mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).5 1/2 x.049 inner tube (12.7 x 1.24mm) with 3/4 x.065 outer tube (19.05 x 1.65mm) Visual Characteristics Surface conditions (allowable number and severity of flaws) are coded and with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: F 7 R -. 5 X

14 Specification 401 UHP Electropolished (STM) TUE T4 OS OW S KS NS RS RW VS Process Tube, Valex 401 Specification lloy (Per Valex SP-9200) Single-melt 316L seamless Single-melt 316L welded Double-melt 316L seamless Double-melt 316L seamless Single-melt 316L seamless Single-melt 316L seamless Single-melt 316L welded Double-melt 316L seamless Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length /4 (19.05mm), 20 length (25.4mm), 20 length (38.1mm), 20 length (50.8mm), 20 length (63.5mm), 20 length (76.2mm), 20 length (101.6mm), 20 length (152.4mm), 20 length.13 1/8 (3.18mm), 4M length.25 1/4 (6.35mm), 4M length.38 3/8 (9.53mm), 4M length.50 1/2 (12.7mm), 4M length.75 3/4 (19.05mm), 4M length (25.4mm), 4M length (38.1mm), 4M length (50.8mm), 4M length (63.5mm), 4M length (76.2mm), 4M length (101.6mm), 4M length (152.4mm), 4M length Thickness (0.71mm) (0.89mm) (1.00mm) (1.24mm) (1.65mm) (2.10mm) (2.76mm) Visual Characteristics C PRT NO. - - X4 - - Surface conditions (allowable number and severity of flaws) are coded, and C with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max; For C above, 10Ra µin NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length tube: T 4 - O S X COXIL TUE CT4 S W W LNK OW S KS NS RS RW VS Process Coaxial Tubing, Valex 401 Specification Outer Jacket Type 316L seamless 304 welded 316L welded Inner lloy (Per Valex SP-9200) Single-melt 316L seamless Single-melt 316L welded Double-melt 316L seamless Double-melt 316L seamless Single-melt 316L seamless Single-melt 316L seamless Single-melt 316L welded Double-melt 316L seamless Size () Specify Process (Inner) Tube Size PRT NO X /4 x.035 inner tube (6.35 x 0.89mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).25M 1/4 x.039 inner tube (6.35 x 1.00mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).375 3/8 x.035 inner tube (9.53 x 0.89mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).375M 3/8 x.039 inner tube (9.53 x 1.00mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).5 1/2 x.049 inner tube (12.7 x 1.24mm) with 3/4 x.065 outer tube (19.05 x 1.65mm).75 3/4 x.065 inner tube (19.05 x 1.65mm) with 1 x.065 outer tube (25.4 x 1.65mm) 1 1 x.065 inner tube (25.4 x 1.65mm) with 1.25 x.065 outer tube (31.75 x 1.65mm) x.065 inner tube (38.1 x 1.65mm) with 2 x.065 outer tube (50.8 x 1.65mm) Inner Visual Characteristics C Surface conditions (allowable number and severity of flaws) are coded, and C with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Inner Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max; For C above, 10Ra µin NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length coaxial tube: C T 4 - W - O S -. 5 X4-7

15 FITTINGS lloy (Per Valex SP-9200) E OS/OW (Single-melt 316L) Q VS (Double-melt 316L seamless) RE RS/RW (Single-melt 316L) Y KS (Double-melt 316L seamless) Type 2 90 Elbow 2W 90 Elbow, welded 2K 45 Elbow 2KW 45 Elbow, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 7RWW Reducing Tee, welded x welded 16 End Cap 16W End Cap, welded 31S Concentric Reducer, short 31 Concentric Reducer 31W Concentric Reducer, welded x seamless 31WW Concentric Reducer, welded x welded Size ().25 1/4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).375 3/8 x.035 wall (9.53 x 0.89mm).375M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm).75 3/4 x.065 wall (19.05 x 1.65mm) 1 1 x.065 wall (25.4 x 1.65mm) x.065 wall (38.1 x 1.65mm) 2 2 x.065 wall (50.8 x 1.65mm) x.065 wall (63.5 x 1.65mm) 3 3 x.065 wall (76.2 x 1.65mm) 4 4 x.083 wall (101.6 x 2.1mm) 6 6 x.109 wall (152.4 x 2.76mm) Visual Characteristics C PRT NO. Surface conditions (allowable number and severity of flaws) are coded, and C with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max; for C above, 10Ra µin - X - NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: E 7 R - 1 X COXIL FITTINGS PRT NO. Inner lloy (Per Valex SP-9200) C OS/OW (Single-melt 316L) R VS (Double-melt 316L seamless) RC RS/RW (Single-melt 316L) W KS (Double-melt 316L seamless) Type 2 90 Elbow 2K 45 Elbow 7 Equal Tee 7R Reducing Tee 31 Concentric Reducer 7P Purge Tee 7PFS Purge Tee with FS 12 Sleeve 14FS FS Weld Gland, Female 15FS FS Weld Gland, Male 16 Terminator 17H ulkhead Fitting Size () Specify Process (Inner) Tube Size.25 1/4 x.035 inner tube (6.35 x 0.89mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).25M 1/4 x.039 inner tube (6.35 x 1.00mm) with 1/2 x.049 outer tube (12.7 x 1.24mm).375 3/8 x.035 inner tube (9.53 x 0.89mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).375M 3/8 x.039 inner tube (9.53 x 1.00mm) with 5/8 x.049 outer tube (15.87 x 1.24mm).5 1/2 x.049 inner tube (12.7 x 1.24mm) with 3/4 x.065 outer tube (19.05 x 1.65mm).75 3/4 x.065 inner tube (19.05 x 1.65mm) with 1 x.065 outer tube (25.4 x 1.65mm) 1 1 x.065 inner tube (25.4 x 1.65mm) with 1.25 x.065 outer tube (31.75 x 1.65mm) x.065 inner tube (38.1 x 1.65mm) with 2 x.065 outer tube (50.8 x 1.65mm) Visual Characteristics C Surface conditions (allowable number and severity of flaws) are coded and with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max; for C above, 10Ra µin NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: - X - C 7 R -. 5 X

16 Specification 301 HP Electropolished (STM) TUE PRT NO Process T3 Tube, Valex 301 Specification lloy (Per Valex SP-9200) OS Single-melt 316L seamless OW Single-melt 316L welded Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length /4 (19.05mm), 20 length (25.4mm), 20 length (38.1mm), 20 length (50.8mm), 20 length (63.5mm), 20 length (76.2mm), 20 length (101.6mm), 20 length Thickness (0.71mm) (0.89mm) (1.24mm) (1.65mm) (2.10mm) NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. Example: T 3 - O S

17 Specification 201 Non-Electropolished (STM) TUE FITTINGS Process T2 Tube, Valex 201 Specification lloy (Per Valex SP-9200) OS Single-melt 316L seamless OW Single-melt 316L welded 2S Single-melt 304L seamless 2W Single-melt 304L welded S Single-melt 304 seamless W Single-melt 304 welded NS Single-melt 316L seamless RS Single-melt 316L seamless RW Single-melt 316L welded Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length /4 (19.05mm), 20 length (25.4mm), 20 length (38.1mm), 20 length (50.8mm), 20 length (63.5mm), 20 length (76.2mm), 20 length (101.6mm), 20 length (152.4mm), 20 length.13 1/8 (3.18mm), 4M length.25 1/4 (6.35mm), 4M length.38 3/8 (9.53mm), 4M length.50 1/2 (12.7mm), 4M length.75 3/4 (19.05mm), 4M length (25.4mm), 4M length (38.1mm), 4M length (50.8mm), 4M length (63.5mm), 4M length (76.2mm), 4M length (101.6mm), 4M length (152.4mm), 4M length Thickness (0.71mm) (0.89mm) (1.00mm) (1.24mm) (1.65mm) (2.10mm) (2.76mm) Inner lloy (Per Valex SP-9200) D S/W (Single-melt 304) OS/OW (Single-melt 316L) D 2S/2W (Single-melt 304L) R RS/RW (Single-melt 316L) Type 2 90 Elbow 2W 90 Elbow, welded 2K 45 Elbow 2KW 45 Elbow, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 7RWW Reducing Tee, welded x welded 16 End Cap 16W End Cap, welded 31S Concentric Reducer, short 31 Concentric Reducer 31W 31WW Concentric Reducer, welded x seamless Concentric Reducer, welded x welded Size ().25 1/4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).375 3/8 x.035 wall (9.53 x 0.89mm).375M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm).75 3/4 x.065 wall (19.05 x 1.65mm) 1 1 x.065 wall (25.4 x 1.65mm) x.065 wall (38.1 x 1.65mm) 2 2 x.065 wall (50.8 x 1.65mm) x.065 wall (63.5 x 1.65mm) 3 3 x.065 wall (76.2 x 1.65mm) 4 4 x.083 wall (101.6 x 2.1mm) 6 6 x.109 wall (152.4 x 2.76mm) PRT NO. - - X4 - NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length tube: T 2 - O S X PRT NO. - X NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: 7 R W - 1 X

18 Specification 101 Non-Electropolished (STM) TUE T1 OS OW 2S 2W S W RS RW Process Tube, Valex 101 Specification lloy (Per Valex SP-9200) Single-melt 316L seamless Single-melt 316L welded Single-melt 304L seamless Single-melt 304L welded Single-melt 304 seamless Single-melt 304 welded Single-melt 316L seamless Single-melt 316L welded Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length /4 (19.05mm), 20 length (25.4mm), 20 length (38.1mm), 20 length (50.8mm), 20 length (63.5mm), 20 length (76.2mm), 20 length (101.6mm), 20 length (152.4mm), 20 length.13 1/8 (3.18mm), 4M length.25 1/4 (6.35mm), 4M length.38 3/8 (9.53mm), 4M length.50 1/2 (12.7mm), 4M length.75 3/4 (19.05mm), 4M length (25.4mm), 4M length (38.1mm), 4M length (50.8mm), 4M length (63.5mm), 4M length (76.2mm), 4M length (101.6mm), 4M length (152.4mm), 4M length Thickness (0.71mm) (0.89mm) (1.00mm) (1.24mm) (1.65mm) (2.10mm) (2.76mm) PRT NO. - - X4 - NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length tube: T 1 - O S X

19 Specification 222 Hastelloy C-22 (STM) TUE PRT NO Process TMC Tube, Valex 222 Specification lloy (Hastelloy C-22 ) HS Seamless HW Welded Size () /4 (6.35mm), 20 length /8 (9.53mm), 20 length /2 (12.7mm), 20 length Thickness (0.89mm) (1.24mm) NOTE: Not all configurations are available. Example: T M C - H S FITTINGS PRT NO. H - X Type 2 90 Elbow 2W 90 Elbow, welded 2K 45 Elbow 2KW 45 Elbow, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 16 End Cap 16W End Cap, welded 31 Concentric Reducer 31W Concentric Reducer, welded x seamless Size ().25 1/4 x.035 wall (6.35 x 0.89mm).375 3/8 x.035 wall (9.53 x 0.89mm).5 1/2 x.049 wall (12.7 x 1.24mm) NOTE: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced tube size. Example for Reducing Tee: H 7 R W

20 Dimensions (JIS) NOTE: ll dimensions are in millimeters. PIPE Weight Maximum Safe Working Pressure* Size Sch. per ar PSI meter (kg) Seamless Welded Seamless Welded 8 5S ,474 1, S ,959 1, S ,291 1, S ,813 1, S ,440 1, S , S S S S S S S S S S S ,689 2, S ,904 2, S ,038 2, S ,396 1, S ,568 2, S ,019 1, S ,764 1, S ,405 1, S , S , S S S S S S S N N.. N.. N.. N.. N.. N N N.. N.. N.. N.. N.. N.. * Maximum safe working pressure is calculated per SME , Material: T304L or T316L per JIS G3459 Temperature Range = C to C, -20 F to +300 F 18 NOTE: For sizes 350 and larger please contact Valex for availability.

21 R 90 ELOW (LONG) Size 5S 10S R R 90 ELOW (SHORT) Size 5S 10S R R 90 ELOW (NO TNGENT, MNUL WELD) Size R = 5S 10S LONG SHORT N N NOTE: For sizes 250 and larger please contact Valex for availability.

22 Dimensions (JIS) 45 ELOW Size 5S 10S R R ELOW (NO TNGENT, MNUL WELD) Size LONG 5S 10S R R EQUL TEE Size 5S 10S NOTE: For sizes 250 and larger please contact Valex for availability.

23 REDUCING TEE Size (ase) (ase) 5S (ase) 10S X Size (Riser) (Riser) C x 1/4-1/ x 8, 1/4-1/2 13.8, x 8, 1/4-1/2 13.8, x 10, 3/4 17.3, x 8, 1/4-1/2 13.8, x 10-15, 3/ , x 8, 1/4-1/2 13.8, x 10-20, 3/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32, 1-1/2 42.7, x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-40, 1-1/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x 2-1/ x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x 65, 2-1/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x 65-80, 2-1/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x , 2-1/ , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x , 2-1/ , x x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x , 2-1/ , x , , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x , 2-1/ , x , , x 8, 1/4-1/2 13.8, x 10-25, 3/ , x 32-50, 1-1/ , x , 2-1/ , x , , RISER SE 21 NOTE: For sizes 250 and larger please contact Valex for availability. C

24 Dimensions (JIS) CONCENTRIC REDUCER Size 5S 10S X Size O.D x 1/4-1/ x 8, 1/4-1/2 13.8, x 8-10, 1/4-3/ , x 8-15, 1/ , x 8-20, 1/ , x 8-25, 1/4-1-1/ , x 8-32, 1/4-1-1/ , x 8-40, 1/ , x 8-50, 1/4-2-1/ , x 8-65, 1/ , x 8-80, 1/ , x 8-100, 1/ , x 8-125, 1/ , x 8-150, 1/ , x 8-200, 1/ , x 8-250, 1/ , NOTE: For sizes 250 and larger please contact Valex for availability.

25 Specification 401 UHP Electropolished (JIS) PIPE PRT NO. - - X4 - - Process P4 Pipe, Valex 401 Specification lloy (Per Valex SP-9200) RS Single-melt 316L seamless RW Single-melt 316L welded Size () mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length Pipe Ends Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Pipe Schedule 05S JIS Pipe Schedule 5 10S JIS Pipe Schedule JIS Pipe Schedule 5 10 JIS Pipe Schedule 10 Visual Characteristics C Surface conditions (allowable number and severity of flaws) are coded,, and C with being superior. Each surface code is defined by a set of workmanship standards that are configuration and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max; for C above, 10Ra µin Note: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length pipe: P 4 R S X

26 Specification 401 UHP Electropolished (JIS) FITTINGS PRT NO. J E - X - Type 2(S) 90 Elbow, short 2(L) 90 Elbow, long 2(SS) 90 Elbow (no tangent), short manual weld 2(LS) 90 Elbow (no tangent), long manual weld 2W(S) 90 Elbow, short, welded 2W(L) 90 Elbow, long, welded 2W(SS) 90 Elbow (no tangent), short manual weld, welded 2W(LS) 90 Elbow (no tangent), long manual weld, welded 2K 45 Elbow 2K(LS) 45 Elbow (no tangent), long manual weld 2KW 45 Elbow, welded 2KW(LS) 45 Elbow (no tangent), long manual weld, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 7RWW Reducing Tee, welded x welded 31 Concentric Reducer 31W Concentric Reducer, welded x seamless 31WW Concentric Reducer, welded x welded Size () mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Pipe Ends (JIS end types only) Pipe Schedule LNK JIS Pipe Schedule 5 T JIS Pipe Schedule 10 C.25 1/4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).38 3/8 x.035 wall (9.53 x 0.89mm).38M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm).75 3/4 x.065 wall (19.05 x 1.65mm) 1 1 x.065 wall (25.4 x 1.65mm) x.065 wall (38.1 x 1.65mm) 2 2 x.065 wall (50.8 x 1.65mm) x.065 wall (63.5 x 1.65mm) 3 3 x.065 wall (76.2 x 1.65mm) 4 4 x.083 wall (101.6 x 2.1mm) 6 6 x.109 wall (152.4 x 2.76mm) Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Visual Characteristics Surface conditions (allowable number and severity of flaws) are coded,, and C with being superior. Each surface code is defined by a set of workmanship standards that are configured and change controlled. Surface Roughness 5 5Ra µin max 7 7Ra µin max 0 For above, 10Ra µin max: for C above, 10Ra µin Note: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced pipe size. Example for Reducing Tee: J E 7 R X

27 Specification 201 Non-Electropolished (JIS) PIPE PRT NO. - - X4 - Process P2 Pipe, Valex 201 Specification lloy (Per Valex SP-9200) 2S Single-melt 304L seamless 2W Single-melt 304L welded S Single-melt 304 seamless W Single-melt 304 welded RS Single-melt 316L seamless RW Single-melt 316L welded Size () mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 4M length 27.2mm, 4M length 34.0mm, 4M length 42.7mm, 4M length 48.6mm, 4M length 60.5mm, 4M length 76.3mm, 4M length 89.1mm, 4M length 101.6mm, 4M length 114.3mm, 4M length 139.8mm, 4M length 165.2mm, 4M length 216.3mm, 4M length 267.4mm, 4M length 318.5mm, 4M length 355.6mm, 4M length Pipe Ends Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Pipe Schedule 05S JIS Pipe Schedule 5 10S JIS Pipe Schedule JIS Pipe Schedule 5 10 JIS Pipe Schedule 10 Note: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length pipe: P 2 - R S X

28 Specification 201 Non-Electropolished (JIS) FITTINGS PRT NO. - X lloy (Per Valex SP-9200) J RS/RW Single-melt 316L JD S/W Single-melt 304 Type 2(S) 90 Elbow, short 2(L) 90 Elbow, long 2W(SS) 90 Elbow (no tangent), short manual weld 2W(LS) 90 Elbow (no tangent), long manual weld 2W(S) 90 Elbow, short, welded 2W(L) 90 Elbow, long, welded 2W(SS) 90 Elbow (no tangent), short manual weld, welded 2W(LS) 90 Elbow (no tangent), long manual weld, welded 2K 45 Elbow 2K(LS) 45 Elbow (no tangent), long manual weld 2KW 45 Elbow, welded 2KW(LS) 45 Elbow (no tangent), long manual weld, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 7RWW Reducing Tee, welded x welded 31 Concentric Reducer 31W Concentric Reducer, welded x seamless 31WW Concentric Reducer, welded x welded Size () mm mm mm mm mm mm mm mm mm mm mm mm mm mm Pipe Ends (JIS end types only) Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Pipe Schedule LNK JIS Pipe Schedule 5 T JIS Pipe Schedule /4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).38 3/8 x.035 wall (9.53 x 0.89mm).38M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm).75 3/4 x.065 wall (19.05 x 1.65mm) 1 1 x.065 wall (25.4 x 1.65mm) x.065 wall (38.1 x 1.65mm) 2 2 x.065 wall (50.8 x 1.65mm) x.065 wall (63.5 x 1.65mm) 3 3 x.065 wall (76.2 x 1.65mm) 4 4 x.083 wall (101.6 x 2.1mm) 6 6 x.109 wall (152.4 x 2.76mm) Note: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced pipe size. Example for Reducing Tee: J 7 R X

29 Specification 101 Non-Electropolished (JIS) PIPE PRT NO. - - X4 - Process P1 Pipe, Valex 101 Specification lloy (Per Valex SP-9200) 2S Single-melt 304L seamless 2W Single-melt 304L welded S Single-melt 304 seamless W Single-melt 304 welded RS Single-melt 316L seamless RW Single-melt 316L welded Size () mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 6M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length mm, 4M length Pipe Ends Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Pipe Schedule 05S JIS Pipe Schedule 5 10S JIS Pipe Schedule JIS Pipe Schedule 5 10 JIS Pipe Schedule 10 Note: Not all configuration are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with 4-meter lengths. Example for 4-meter length pipe: P 1 - R S X

30 Dimensions Specification (JIS) 101 Non-Electropolished (JIS) FITTINGS PRT NO. J - X Type 2(S) 90 Elbow, short 2(L) 90 Elbow, long 2(SS) 90 Elbow (no tangent), short manual weld 2(LS) 90 Elbow (no tangent), long manual weld 2W(S) 90 Elbow, short, welded 2W(L) 90 Elbow, long, welded 2W(SS) 90 Elbow (no tangent), short manual weld, welded 2W(LS) 90 Elbow (no tangent), long manual weld, welded 2K 45 Elbow 2K(LS) 45 Elbow (no tangent), long manual weld 2KW 45 Elbow, welded 2KW(LS) 45 Elbow (no tangent), long manual weld, welded 7 Equal Tee 7W Equal Tee, welded 7R Reducing Tee 7RW Reducing Tee, welded x seamless 7RWW Reducing Tee, welded x welded 31 Concentric Reducer 31W Concentric Reducer, welded x seamless 31WW Concentric Reducer, welded x welded Size () mm mm mm mm mm mm mm mm mm mm mm mm mm mm Pipe Ends (JIS end types only) Faced and squared ends suitable for orbital welding 32.5 eveled ends suitable for manual welding Pipe Schedule LNK JIS Pipe Schedule 5 T JIS Pipe Schedule /4 x.035 wall (6.35 x 0.89mm).25M 1/4 x.039 wall (6.35 x 1.00mm).38 3/8 x.035 wall (9.53 x 0.89mm).38M 3/8 x.039 wall (9.53 x 1.00mm).5 1/2 x.049 wall (12.7 x 1.24mm).75 3/4 x.065 wall (19.05 x 1.65mm) 1 1 x.065 wall (25.4 x 1.65mm) x.065 wall (38.1 x 1.65mm) 2 2 x.065 wall (50.8 x 1.65mm) x.065 wall (63.5 x 1.65mm) 3 3 x.065 wall (76.2 x 1.65mm) 4 4 x.083 wall (101.6 x 2.1mm) 6 6 x.109 wall (152.4 x 2.76mm) Note: Not all configurations are available. Part number options may be subject to change. Please refer to SP-9200 at for the latest revision. * For use only with Reducing Tees and Concentric Reducers - specify reduced pipe size. Example for Reducing Tee: J 7 R X

31 Valex Corp. California, US Valex Korea Kyonggi Province, Korea Valex PRC Shanghai, China Company History Valex Corp. begins initial operations Valex Corp. expands and moves into larger Ventura facility Valex Corp. purchased by Reliance Steel & luminum Co. (NYSE: RS) Valex Korea established Valex Korea begins initial operations Valex Korea expands operations and facility Valex China established Valex China begins initial operations C801

32 Valex Corporate Offices & Manufacturing 6080 Leland Street Ventura, C United States of merica FX 2-2L Eyon-Hansan Industrial Park Chungbuk-myon, Pyongtaek-city Kyonggi Province, Korea FX ldg #27, 399 Xuanzhong Road, Nanhui Industrial Zone, Shanghai, China Postal Code: FX