Flexible Stainless Steel Tube

Transcription

1 Flexible Stainless Steel Tube No Soldering Joints UP to 50m per roll While 15m/20m as regular package. Low cost tool to make flange Guarantee seal Test pressure 17.5 bar The following dimensions are available: 1/2" 3/4" 1" 11/4" DN 16 DN 20 DN 25 DN 32 Application: 1. Solar Insulation hose 2. Hot and cold plumbing installation 3. Alternative plumbing pipe instead of copper pipes Assembly Item & Material

2 No. Item Material 1 Nut Brass 2 Metal Hose SUS304 2B/SUS316L 3 Gasket 350 High-temperature resistance seal 4 Cir-Clip Stainless Steel SUS304 Dimension and Performance DN φid mm φod mm δ mm meters per Coil Bending Radius mm Maximum Applicable Pressure kgf/cm 2 Burst Pressure kgf/cm 2 DN DN DN DN Twin Way Pre-Insulated Solar Hose

3 Specifically designed for solar thermal systems: 1. Each coil includes two parts: roof pipe and in-door pipe. Two meters' roof pipe at one end, which have excellent performance of UV-resistance, water proof and bird peck-protective 2. A flexible high-grade stainless steel tube SUS 316L (or SUS304 2B). 3. EPDM insulation. Working temperature rang from -50 to 150,Max to UV resistant and High mechanical resistant protective film. 5. Cost effective. Easy connection.no soldering required, Saving installation time lead to labor costs reduction. 6. Make the installation work easier and minimal space required for installation Flexible Twin-Way Pre-Insulated Solar Hose Flexible stainless steel tube with insulation, minimal pressure loss. Twin/Single Pre Insulated Solar Hose Performance Data DN Insulation Pipe SS-tube Supplied with/without

4 Material Thickness (mm) Temp Material Thickness (mm) lengths (M) control cable DN16 EPDM to 150 SUS316L SUS /10/15 /20 2-wire silicone cable DN20 EPDM to 150 SUS316L SUS /10/15 /20 2-wire silicone cable DN25 EPDM to 150 SUS316L SUS /10/15 /20 2-wire silicone cable Technical Specifications Details for the Components: INSULATION Material Temperature range Flammability :actual burning behavior Water Vapor permeability Thermal Conductivity W/(m.K) High quality synthetic elastomer (EPDM based) with a complete closed-cell structure. From -50 to +150 (up to 175 C operating intermittent.) DIN 4102-B2 self-extinguishing, no fireball drops, limited fire spreading u> : C: C: C: 0.039

5 JACKETING Material UV Resistance UV resistant and high mechanical resistant protective film Excellent UV and weather resistant properties TEMPERATURE SENSOR WIRE Temperature Range from -50 to +200 Flexible Copper 0.75mm 2 Wire Insulation Rated Voltage Silicon 300/500 V Electric Resistance 23.0 Ohm/km Fittings for Stainless Tube Nuts, Brass Nipples, C-rings and Washers Compression Fittings

6 C-ring Clip Washers, resisting 350 temperature Brass nuts Double Brass Nipple Male Thread Pipe support clamp 1 Pipe support clamp 2 Pipe support clamp 3 Pipe support clamp 4

7 Metal Hose Tool and Installation Procedure Metal Hose Tool: Cutter Flat tool Installation Procedure: Step one: Cut the hose to your desired length with cutter Step two: Put a fitting onto the solar hose, put one end into flat tool

8 Step three: Use a hammer to flatten the end of the hose Step four: squeeze on the Solar hose stainless steel Circlip on Step five: See the Pics. Step six:see the Pics.

9 Carton Package Standard Export Packaged and the size is 1150mm*1150mm*150mm (15M);1150mm*1150mm*200mm(20M ) Ethylene-Propylene-Diene Monomer 三元乙丙橡胶 ( 含双环戊二稀 ) It is now proven by a growing number of regular installers of solar water heating systems even with the cost difference between copper and flexible stainless steel pipe, is that SS flexible is the choice material for a fast leak free job. Using this type of pipe, which can be bent double and still hold its roundness with full insulated tubing with no splits attached to roof joists together. SS pipe cuts down on the number of joints by 90% when compared to copper pipe and can thus reduce labor costs and concerns about leaks in the roof space, which even for the very best plumbers is often a concern as water is passed through the system under pressure. Besides, our cost effective SS flexible pipe on a roll, we can also offer the correct ID diameter tube insulation made of closed cell, fiber-free EPDM elastomeric foam to match the OD of the pipe, also a choice of tube thickness required for different countries. A second option where long lengths of insulated pipe are exposed outside when a flat roof installation is the norm, we also offer a aluminum foil coated insulated SS pipe is a absolute must no matter where in the world you are installing a solar water heating system. It is available in any length and in 8 diameters and thicknesses to suit heating and cooling applications. It is ideal for use with our Flex stainless steel pipe, allowing the pipe to be passed down the centre of the un-split insulation tube Our products have passed the ISO9001:2000 certification. Whole procedure of manufacture is strictly complying with ISO regulations. All our proven products have proven beyond just a cost, to be both labor-saving, overall material cost saving and more important reducing the possibility of water or glycol water mix leaking through the roof space to rooms below.

10 Flex is the choice of solar water heating installer professionals' the one and only choice for all your water heating installations where space is tight and speed of the job is important. We hope our products bring you profit and convenience..