PIPE INDEX STAINLESS STEEL WELDED / SEAMLESS PIPE DIMENSION AND WEIGHT 2

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "PIPE INDEX STAINLESS STEEL WELDED / SEAMLESS PIPE DIMENSION AND WEIGHT 2"

Transcription

1 INDEX STAINLESS STEEL WELDED / SEAMLESS DIMENSION AND WEIGHT STAINLESS STEEL WELDED TYPE 0L S, ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE 0 ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE 0L 0S, 0S ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE 0 0S, 0S ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE L S, ALLOWABLE WORKING PRESSURE 7 STAINLESS STEEL WELDED TYPE ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE L 0S, 0S ALLOWABLE WORKING PRESSURE 9 STAINLESS STEEL WELDED TYPE 0S, 0S ALLOWABLE WORKING PRESSURE

2 STAINLESS STEEL WELDED / SEAMLESS DIMENSION AND WEIGHT unit : inch / lb SCHEDULE S 0S 0S STD XS XXS O.D. Wall/ In Wgt / Ft / " / " / " / " " / " / " " / " " / " " " " " " " " " " " " " " Highlighted Produced by Ta Chen Stainless Pipe Co, Ltd. *SEE STD WALL **SEE XS WALL

3 STAINLESS STEEL WELDED TYPE 0L SCHEDULES S, ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE 0L Schedules S, PSIG S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. Allowable Working Pressures shown for each size reflect the minus % manufacturers wall tolerance.

4 STAINLESS STEEL WELDED TYPE 0 SCHEDULE ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE 0 Schedule PSIG The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. The Stress Values at all temperatures above 00F apply only when the carbon is 0.0% or higher.

5 STAINLESS STEEL WELDED TYPE 0L SCHEDULES 0S, 0S ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE 0L Schedules 0S, 0S PSIG 0S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. Allowable Working Pressures shown for each size reflect the minus % manufacturers wall tolerance.

6 STAINLESS STEEL WELDED TYPE 0 SCHEDULES 0S, 0S ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE 0 Schedules 0S, 0S PSIG 0S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. The Stress Values at all temperatures above 00F apply only when the carbon is 0.0% or higher.

7 STAINLESS STEEL WELDED TYPE L SCHEDULES S, ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE L Schedules S, PSIG S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. Allowable Working Pressures shown for each size reflect the minus % manufacturers wall tolerance. 7

8 STAINLESS STEEL WELDED TYPE SCHEDULE ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE Schedule PSIG The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. The Stress Values at all temperatures above 00F apply only when the carbon is 0.0% or higher.

9 STAINLESS STEEL WELDED TYPE L SCHEDULES 0S, 0S ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE L Schedules 0S, 0S PSIG 0S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. Allowable Working Pressures shown for each size reflect the minus % manufacturers wall tolerance. 9

10 STAINLESS STEEL WELDED TYPE SCHEDULES 0S, 0S ALLOWABLE WORKING PRESSURE FOR A- WELDED TYPE Schedules 0S, 0S PSIG 0S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S The Allowable Stress Values used are as shown in Appendix "A" of ANSI B.-99 for welded pipe to ASTM A- having a weld joint factor of.0. The Stress Values at all temperatures above 00F apply only when the carbon is 0.0% or higher.

A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm

A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

Butt Weld Pipe Fittings

Butt Weld Pipe Fittings Butt Weld Pipe Fittings Butt Weld Fittings Dimension aterial Spec. aterial Grades : ANSI B16.9, B16.25, B16.28, SS SP-43, SP-48, SP-59 : AST A403, A240, A312, A234 WPB : 304, 304L, 316, 316L, ARBON STEEL

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

Texas Flange. Product Catalog Fax

Texas Flange. Product Catalog Fax Texas Flange Product Catalog 800-826-3801 630-627-0642 Fax Information In this catalog was compiled from industry sources which Texas Flange & Fitting believes to be reliable. Texas Flange & Fitting Supply,

More information

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches)

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) NOTE: Measurements for diameter are to be taken at least 2 inches (a) from the ends of the tubes

More information

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe Black and Galvanized Steel Pipe PIPE Wheatland Steel Pipe is made by specialists who understand that it s the small details that make the difference between average products and superior products. At the

More information

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK (713) 690-0040 THIS PAGE INTENTIONALLY LEFT BLANK ORIFICE FLANGES In Carbon, Alloy and Stainless 300lb. through 2500 lb. or Ring Joint ORIFICE FLANGES are widely used in conjunction with orifice meters

More information

Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409

Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Valve Sizing 408-409 Engineering Data Table of Contents Page No. I II Formulas, Conversions & Guidelines Equivalents & Conversion Factors 406 Capacity Formulas for Steam Loads 407 Formulas for Control Sizing 408-409 Steam

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

Description of Bolt Torque Tables

Description of Bolt Torque Tables Description of Bolt Torque Tables (in) (in) (in) (sq.in.) Bolts (in) (ft.lbs.) (psi) (psi) (psig) (psi) (ft.lbs.) (psi) (ft.lbs.) 0.5 0.84 1.38 0.94 4 0.5 60 7560 32134

More information

FIBERGLASS REINFORCED PLASTIC (FRP) PIPING SYSTEMS DESIGNING PROCESS / FACILITIES PIPING SYSTEMS WITH FRP

FIBERGLASS REINFORCED PLASTIC (FRP) PIPING SYSTEMS DESIGNING PROCESS / FACILITIES PIPING SYSTEMS WITH FRP FIBERGLASS REINFORCED PLASTIC (FRP) PIPING SYSTEMS DESIGNING PROCESS / FACILITIES PIPING SYSTEMS WITH FRP A COMPARISON TO TRADITIONAL METALLIC MATERIALS Prepared by: Kevin Schmit, Project Engineer Specialty

More information

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS

Model 222S (Galvanized receiver optional) AURORA. 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS Model 222S (Galvanized receiver optional) AURORA 220 Series SINGLE STAGE CONDENSATE AND BOILER FEED PUMPS WWW.AURORAPUMP.COM AURORA 220 Series Single Stage Condensate and Boiler Feed Pumps 2 Introduction

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

NFPA 13 Standard for the Installation of Sprinkler Systems

NFPA 13 Standard for the Installation of Sprinkler Systems Tentative Interim Amendment NFPA 13 Standard for the Installation of Sprinkler Systems 2013 Edition Reference: Chapter 6 TIA 13-2 (SC 12-8-24/TIA Log #1054) Note: Text of the TIA issued and incorporated

More information

STAINLESS STEEL PIPE NIPPLES

STAINLESS STEEL PIPE NIPPLES Specification: STAINLESS STEEL PIPE NIPPLES The material for Seamless Stainless Steel pipe conforms to the requirements of ASME A 182. Seamless Stainless Steel Nipple Design/Dimensions conform to ASTM

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

Stainless Steel Instrumentation Fractional / Metric Tubing

Stainless Steel Instrumentation Fractional / Metric Tubing Tubing benefits Tubing has many benefits against piping. Pipe threading or welding is difficult to disassemble and re-assemble. Piping requires skilled worker for welding & threading. Piping is bulky.

More information

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless

More information

A World Class Manufacturer of Induction Bends

A World Class Manufacturer of Induction Bends A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction

More information

SECTION 8 AMERICAN. Flanged Pipe

SECTION 8 AMERICAN. Flanged Pipe SECTION 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

Stainless Steel Pipe & Tubing

Stainless Steel Pipe & Tubing CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel Pipe & Tubing Stainless Pipe 304/304L & 316/316L Stainless Steel Pipe Wall Thickness and

More information

Stainless Steel Seamless Tubing and Tube Support Systems

Stainless Steel Seamless Tubing and Tube Support Systems www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked

More information

A.A.NAJJAR TRADING EST.

A.A.NAJJAR TRADING EST. A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals,

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

Progressive, modern, innovative that s what Brunswick Steel is all about.

Progressive, modern, innovative that s what Brunswick Steel is all about. REFERENCE CATALOGUE Progressive, modern, innovative that s what Brunswick Steel is all about. Established in 1970 as a family owned business, Brunswick Steel initially began as a demolition and salvage

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

Subpart C Pipe Design

Subpart C Pipe Design 192.101 Scope Subpart C Pipe Design This subpart prescribes the minimum requirements for the design of pipe. 192.103 General Pipe must be designed with sufficient wall thickness, or must be installed with

More information

CARBON STEEL PIPE - BUTTWELD

CARBON STEEL PIPE - BUTTWELD 010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 15.52 10.86 1/4" 0.42 17.01 15.72 23.88 20.40 3/8" 0.57 22.68 20.96 31.84 27.21 1/2" 0.85

More information

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4 DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD

More information

WD600 STEAM TRAPS. Thermodynamic Steam Trap

WD600 STEAM TRAPS. Thermodynamic Steam Trap WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless

More information

Scraper Passage Indicator. Electrical Indicator. Features

Scraper Passage Indicator. Electrical Indicator. Features IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage

More information

Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing

Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted

More information

MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS GALVANISED FINISH STANDARD LENGTHS AUSTRALIAN STANDARDS THICKNESS AND MARKING

MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS GALVANISED FINISH STANDARD LENGTHS AUSTRALIAN STANDARDS THICKNESS AND MARKING STEEL PIPE MEDIUM & HEAVY PIPE GRADE C250 MANUFACTURING PROCESS Grade C250 Pipe, for general mechanical and low pressure reticulation applications, is manufactured by cold-forming and high frequency Electric

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

Practical Application Of Fastener Preload Guidance Research

Practical Application Of Fastener Preload Guidance Research 2008 ASME Pressure Vessel & Piping Conference Chicago, IL Practical Application Of Fastener Preload Guidance Research John Ludman- E.I. DuPont Jerry Waterland- Virginia Sealing Products, Inc. July 29,

More information

TRICON STEEL-CON. System Specifications

TRICON STEEL-CON. System Specifications TRICON STEEL-CON System Specifications Pipe Size Insulation Thickness Steel Conduit O.D. 1 1½ 6.63 2 1½ 8.63 3 2 10.75 4 2 10.75 6 2 14.00 8 2½ 16.00 10 2½ 18.00 12 2½ 20.00 Based on a minimum 3-6 burial

More information

Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com

Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

1. A belt pulley is 3 ft. in diameter and rotates at 250 rpm. The belt which is 5 ins. wide makes an angle of contact of 190 over the pulley.

1. A belt pulley is 3 ft. in diameter and rotates at 250 rpm. The belt which is 5 ins. wide makes an angle of contact of 190 over the pulley. Sample Questions REVISED FIRST CLASS PARTS A1, A2, AND A3 (NOTE: these questions are intended as representations of the style of questions that may appear on examinations. They are not intended as study

More information

Tubular solutions for the Solar Power Industry Rise in success with precision

Tubular solutions for the Solar Power Industry Rise in success with precision Tubular solutions for the Solar Power Industry Rise in success with precision A comprehensive offer Precision tubes designed for CSP industry applications Solar collectors q Tubes adapted for solar heat

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

Pipe Pile. (800) 848-6249

Pipe Pile. (800) 848-6249 Pipe Pile Similar to H-Piles, Pipe Piles are also designed to transfer structural loads through the foundation to soils below. Where H-Piles are typically classified as point bearing, Pipe Piles are most

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

Specification for Rotary Drill Stem Elements

Specification for Rotary Drill Stem Elements Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004

More information

Contents and Nomenclature

Contents and Nomenclature DX Coils Contents and Nomenclature Nomenclature... 1 Evaporator Coil Types EN... 2 EF... 2 ER... 2 EJ... 3 EK... 3 Evaporator Construction Connections... 4 Tubing... 4 Headers... 5 Tube Supports... 5 Coil

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

The Unique Accelabar Flow Meter

The Unique Accelabar Flow Meter The Unique Accelabar Flow Meter The Accelabar is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter.

More information

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose: PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

Steel Pipe Nipples.

Steel Pipe Nipples. Steel Pipe Nipples www.anvilintl.com SPECIFICATIONS Materials Manufactured in accordance with ASTM Standard Specification A7-Welded and seamless carbon steel and stainless steel pipe nipples. (A5 C/W and

More information

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

TABLE OF CONTENT

TABLE OF CONTENT Page : 1 of 27 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES

More information

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za

Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore

More information

VAD. Variable Area Desuperheaters

VAD. Variable Area Desuperheaters Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated

More information

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following:

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following: Refrigerant Piping The following recommendations are given for ammonia piping. Local codes or ordinances governing ammonia mains should also be followed, in addition to the recommendations here. Recommended

More information

Series 4000 Fiberglass Pipe and Fittings

Series 4000 Fiberglass Pipe and Fittings Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing

More information

Plate heat exchanger. Applications General heating and cooling duties. Heating by means of steam.

Plate heat exchanger. Applications General heating and cooling duties. Heating by means of steam. M3 Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes

More information

Pipe and Tubing Products. Industry Specifications and Scope

Pipe and Tubing Products. Industry Specifications and Scope Pipe and Tubing Products Industry Specifications and Scope Transmission Pipe Specifications API 5L Line Pipe Standard Pipe Transmission of Fluids and Gases (Carbon Steel) API 5L This standard specifies

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe 1

Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe 1 Designation: A 714 99 (Reapproved 2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe 1 This standard is issued under the fixed designation A 714; the number immediately

More information

Stainless Steel Tubular Products

Stainless Steel Tubular Products Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary

More information

VAlloUREc, REFEREncE in project line pipe vallourec.com/br

VAlloUREc, REFEREncE in project line pipe vallourec.com/br VALLOUREC, REFERENCE IN PROJECT LINE PIPE vallourec.com/br Founded with the name Mannesmann, V & M do BRASIL is currently called Vallourec. Vallourec is a world leader in premium tubular solutions primarily

More information

ZA-12. Temperature - Liquidus + 45 o C (81 o C) Vacuum = 90mm

ZA-12. Temperature - Liquidus + 45 o C (81 o C) Vacuum = 90mm Ragonne Fluidity, Inches Zn-Al Impact 38 34 30 26 22 18 14 No. 3 Zn-Al ZA-8 Liquidius ZA-12 Temperature - Liquidus + 45 o C (81 o C) Vacuum = 90mm Zn-Al (0.01-0.02 percent mg) ZA-27 10 0 2 4 6 8 10 12

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

General Approach. Structure Components. Is all lumber the same? Lumber Grades. Rafters Girders / Beams Columns. Sketch general structural layout

General Approach. Structure Components. Is all lumber the same? Lumber Grades. Rafters Girders / Beams Columns. Sketch general structural layout General Approach Sketch general structural layout Determine roof loading Determine required lumber dimensions Transfer load down the structure Structure Components Plants Structure Components Top Side

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions

More information

Pipe Flanges and Flanged Fittings

Pipe Flanges and Flanged Fittings ASME B16.5-2013 (Revision of ASME B16.5-2009) Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.5-2013 (Revision of ASME B16.5-2009)

More information

WELDING-FITTINGS Pipes acc. DIN 11866

WELDING-FITTINGS Pipes acc. DIN 11866 Pipes acc. DIN 11866...45 Pipes acc. to DIN 11866...46 Elbow 45 acc. DIN 11865...47 Elbow 45 acc. DIN 11865...48 Elbow 90 acc. DIN 11865...49 Elbow 90 acc. DIN 11865...50 Elbow 90 (from block-body)...51

More information

pvc well casing & drop pipe

pvc well casing & drop pipe CertainTeed pvc well casing & drop pipe PVC Well Products Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding

More information

MANUFACTURER'S CERTIFICATION SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE

MANUFACTURER'S CERTIFICATION SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE SCHEDULE 40 PVC PIPE And SCHEDULE 80 PVC PIPE PVC materials used in Schedule 40 and Schedule 80 pipe manufactured by Texas United Pipe, Inc., comply with the ASTM Standard D-1784 and are a Type I Grade

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

Vrtné trubky Drill Pipe

Vrtné trubky Drill Pipe Vrtné trubky Drill Pipe VRTNÉ ROURY - zušlechtěné závity - vysoká kvalita těla roury - svařeno třením - vysoká přímost vrtných tyčí - závity dle STN, API, DIN a GOST - délky dle přání zákazníka Průměr

More information

Handbook of Welded Carbon Steel Mechanical Tubing

Handbook of Welded Carbon Steel Mechanical Tubing Handbook of Welded Carbon Steel Mechanical Tubing HANDBOOK OF WELDED CARBON STEEL MECHANICAL TUBING STEEL TUBE INSTITUTE OF NORTH AMERICA 2000 Ponce de Leon, Suite 600, Coral Gables, FL 33134 Tel: (305)

More information

Toroidal Conductivity Sensor

Toroidal Conductivity Sensor Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

P O B o x S t. L o u i s, M O P h o n e : ( ) ~ E m a i l : w m h u i t a o l.

P O B o x S t. L o u i s, M O P h o n e : ( ) ~ E m a i l : w m h u i t a o l. P O B o x 5 4 S t. L o u i s, M O 6-0 5 4 P h o n e : ( 4 ) 9 6 6-8 9 9 ~ E m a i l : w m h u i t t @ a o l. c o m Relationship of Design Pressure, Test Pressure & Set Point By William M. Huitt (From a

More information

Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment

Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment By Patty Brown & Mark van Ginhoven November 13, 2009 1 CA 2009 Fluor Corporation. All Rights Reserved. Topics Covered Introduction Nozzle

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

High Strength Steel (HSS) tubes for structural and engineering applications

High Strength Steel (HSS) tubes for structural and engineering applications High Strength Steel (HSS) tubes for structural and engineering applications 2 Tenaris produces a large dimensional range of seamless tubes in high strength steel for engineering and structural applications

More information

Air Eliminators and Combination Air Eliminators Strainers

Air Eliminators and Combination Air Eliminators Strainers Description Air Eliminators and Combination Air Eliminator Strainers are designed to provide separation, elimination and prevention of air in piping systems for a variety of installations and conditions.

More information

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail.

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM Number Explanation A-48 This specification covers gray iron castings

More information

FERRO-THERM STEEL PIPING SYSTEM

FERRO-THERM STEEL PIPING SYSTEM STEEL PIPING SYSTEM THERMACOR S is a factory-fabricated, preinsulated piping system for below or above ground distribution of hot and chill water, low pressure steam, condensate, or oil and viscous fluids.

More information

Application Guide. Compensators Hose Assemblies Expansion Joints FLEX-WELD INCORPORATED FLEX-WELD.COM. Manufactured By:

Application Guide. Compensators Hose Assemblies Expansion Joints FLEX-WELD INCORPORATED FLEX-WELD.COM. Manufactured By: Compensators Hose Assemblies Expansion Joints Manufactured By: FLEX-WELD INCORPORATED FLEX-WELD.COM What we need to know... A. Physical / System Parameters 1 Size of Assembly: Measure Pipe size (ID) of

More information

Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod

Hilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod , Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many

More information

VT Series Vertical Turbine Pumps

VT Series Vertical Turbine Pumps Water Circulation Pumps & Circulators VT Series Vertical Turbine Pumps VT Series Pumps provide the ultimate in reliability and ease of installation. Applications include condenser water, chilled water,

More information

Copper-Nickel Mill Products

Copper-Nickel Mill Products Copper-Nickel Mill Products Copper-Nickel Rod, Sheet, Plate, and Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its

More information

Mechanical Products. Mechanical Products M06-1

Mechanical Products. Mechanical Products M06-1 Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10

More information

Steel Fire Sprinkler Pipe

Steel Fire Sprinkler Pipe Steel Fire Sprinkler Pipe Wheatland Tube Fire Sprinkler Products Wheatland Tube began producing steel fire sprinkler pipe in 1931, and today offers the most complete line of products in the industry. Engineers

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

STOCK LIST & BUYER S GUIDE

STOCK LIST & BUYER S GUIDE STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500

More information

Performance and Selection Data

Performance and Selection Data MEGAFIRE Gas/Oil Burners Page 263 Performance and Selection Data Packaged Internal Construction EB External Blower version 1/2" NPT Basic MEGAFIRE Burners include an air control shutter, fuel nozzles,

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES 2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:

More information