Industrial-Commercial Surge Protection

Transcription

1 Industrial-Commercial Surge Protection Your One Source for all Surge Protection Devices Panel Mount Surge Protect 1-4, Surge Amp Capacity VorCap Surge Protection Modules The Next Generation Of Surge Suppression systems Panel mount devices can be installed directly on the main electrical panel or equipment disconnect. Devices range from 1, to 4, surge amp capacity and are available in 4, 7 and 1 mode configuration. A variety of enclosures and diagnostic options are available. The ultimate in Surge Protection technology. Fail Safe design insures maximum protection in high surge probability locations. Even under catastrophic surge conditions VorCap technology will take your equipment off line before a surge will, Available in a modular assembly or can be installed as a point source device. Modular Surge Protection Panels Pop Out Field Replaceable Modules Point of Use Surge Devices Equipment level Surge Protection Devices From 1, to 6, Surge Amp Capacity Replacable Modules Virtulally Eliminate Down Time Five, Seven and Ten Mode configurations available with internal & external 2 Kaic fused disconnects, red/green diagnostic LED s, audible alarm, digital surge counter, NEMA 4 & NEMA 4X Stainless steel enclosures. All units come standard with pop out replaceable modules by mode. Equipment level protection for AC / DC Network Cable, Data and low voltage applications. Available in Din-Rail and direct inline installation. Modules can be mounted directly into equipment cabinets or can be custom configured in a variety of enclosures. PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

2 About PSP Products Inc Phoenix Drive Manassas, VA PSP Products Inc. Has served the industrial, commercial, utility and residential markets by providing superior surge protection products and services for nearly twenty years. From our humble beginnings in the office products industry we ve evolved into a forward thinking company offering innovative products to meet the demand of an ever changing market. We strongly believe that our customer is our most valuable asset. Unlike many of our larger competitors, we believe we work for our customers and conform to meet their needs not ours. We stand ready to assist in any way possible to support our customers with any challenge or urgent requirement they may encounter. PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

3 Surge Devices Typhoon 2 Series Nipple Mount- 16, Amps per phase 12/24 Volt single phase whole house surge protector NEMA 4 enclosure, type 1 2 Ka in with LED diagnostics. Typhoon 3 Nipple Mount 1, & 2, Amps per phase, NEMA 4 enclosure, 65 & 2 kaic, with LED s each phase, 7 Mode Protection, Dry Contacts, 1 year warranty. Also available in a NEMA 4X enclosure with Internal/External Fused Disconnect and surge counter. Typhoon 4 3, Amps per phase, NEMA 4 enclosure, 2 kaic, LED s each phase, 1 Mode Protection, Dry Contacts, Push To Test Diagnostics, Surge Counter, Fused Disconnect, 2 year Warranty. Also available in a NEMA 4X enclosure with Internal/External Fused Disconnect and surge counter. Typhoon 5 3,, 4, & 6, Amps per phase, NEMA 4 enclosure, 2 kaic, LED s each phase, Dry Contacts, Audible Alarm, Vorcap Modules, 3 year warranty. OPTIONS: Fused Disconnect, Stainless Steel, 4X enclosure. Vorcap Modules- 1, 2 & 3K surge capacity. Available as individual models, pre-assembled bar assemblies and din-rail. The ultimate surge protection device, trusted by the oil and telecom industries to protect their most critical equipment in the most vulnerable locations. AC Din rail Mount Products 4-15, surge amp capacity modules can be combined and configured for most any requirement. Small foot print allows for internal mounting. Modules include visual end of life indicators as well as for C dry contacts for remote monitoring. Hurricane 3 1,, 2, & 3, Amps per phase, NEMA 4 enclosure, 2 kaic, LED s each phase. Audible Alarm, Dry Contacts, 1 year warranty. OPTIONS: Flush Mount, Surge Counter, Fused Disconnect, Stainless Steel & NEMA 4X. Modular Hurricane 5 1, to 6, Amps per phase, Replaceable modules by mode. Available in NEMA 1, 4, 4X, stainless with full diagnostics including, red-green led s with push to test, dry contacts, audible alarm with Disable Switch, Surge Counter, internal and external fused disconnect. DC Din rail Products 4-7, surge amp capacity modules can be combined and configured for most any requirement. Small foot print allows for internal mounting. Modules include visual end of life indicators as well as for C dry contacts for remote monitoring. Ethernet- Cat 5 & POE Products - 4, surge amp capacity plug and play either net protection. POE or standard configuration available for a broad range of surge protection applications. Generator Surge Protector - 16, surge amp capacity type one surge protector designed and approved to be installed on the LINE side of the generator transfer switch protecting both the transfer switch and the entire home from damaging electrical surges. 2 Ka In, NEMA 4 Enclosure.

4 TYPHOON 2 R e s i d e n t i a l S u rg e P ro t e c t i o n TYPHOON SERIES 12/24 SPLIT PHASE WHOLE HOUSE SURGE PROTECTOR Type 1 Device - No Breaker Required For Installation Feat ures UL rd Edition Listed Common mode suppression Thermal fused metal oxide varistor (MOV) suppression technology Light-emitting diode (LED) visual protection status indicator Type 4-outdoor-rated Enclosures Available in maximum surge current capacity of 16kA Bene fits Surge protection devices with extended operating temperature and the versatility of either a Type 1 indoor or Type 4 outdoor rated enclosure. Basic Applications Residential Telecommunications Light commercial applications PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

5 TYPHOON 2 R e s i d e n t i a l S u rg e P ro t e c t i o n T1B16-4X-NF Specifications Electrical Model Surge Protection Device (SPD) Type to UL Operating AC Voltage Maximum Continuous Operating AC Voltage (MCOV): Line-Neutral Nominal Discharge Current [I n ] Line-Ground Neutral-Ground Line-Line Maximum Surge Current Capacity [I ]: Line-Neutral max Fault Current Rating (Sccr) Voltage Protection Rating (VPR): Suppression Technology Mechanical Line-Ground Neutral-Ground Line-Line Line-Neutral Line-Ground Neutral-Ground Connection Terminal (Suppression) Hardwired Operation Temperature ( C) Enclosure Type (Outdoor) Enclosure Dimension (L W H) Weight Line-Line T1B16-4X-NF Type 1 12/24 V 3W+G 14 V 14 V 14 V 28 V 2 ka 8 ka 8 ka 8 ka 1 ka 1kA No Breaker 2ka With Breaker 6 V 1V 6 V 1V MOV #12 AWG pigtail leads -4 C to +8 C Type 4 PVC Plastic [ mm] 4. lbs [1.81 kg] Pr oduc t Diagram [294.14] [62.31] 2.45 [11.6] 4. [8. [32.46] [5.8] [8. [5.8] 2. [13.43] [11.6 [117.73] [mm] inches Optional Flush Mount Cover AWG=American Wire Gauge PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

6 H1-75-4N 12/24 Single Phase Type 1 75Ka Surge Protector H1-75-4N All Mode Type 1 Surge Protection With MOV and Dual Gas Tube Technology H1-75-4N Single Phase Surge Protector Features Small Footprint, Nipple or Bracket Installation 75Ka Imax Surge Capacity Structure All Mode Surge Protector with Gas Tube Technology U.L rd Addition In 1Ka Type 1 Type 4X Indoor/Outdoor Enclosure Internal Thermal fused (MOV) suppression technology Light-emitting diode (LED) visual indicator Ten Year Warranty Available in 12, 277 and 48 Volts AC Green: Black Black locknut Optional Bracket Enclosure PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

7 H1-75-4N 12/24 Single Phase 75 Ka Surge Protector Specifications Surge Protection Device UL Type: Voltage range: Maximum Continuous Voltage (MCOV) Nominal Discharge Current (In) Maximum Surge Capacity (Imax) Voltage Protection Rating (VPR) Suppression Technology Operating Temperature Enclosure Type: Connection Terminals: Standards: Warranty: Type 1 12/24 Single Phase 15 Line Ground 3 Line-Line 1 Ka 75 Ka 6 Volts L-G Thermally Protected MOV with Dual Gas Tubes -4 C - +8 C NEMA 4X Indoor Outdoor Hardwire12 14 AWG Pigtail Leads UL rd Edition IEEE IP65 1 Year Warranty G F H C D E I K J A B L A B C D E F G H I J K L PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

8 TYPHOON 3 Co m m erc i a l Gra d e S u rg e P ro t e c t i o n T1AC1/T1AC2 & T2AC1/T2AC2 Series Up to T1AC21SM Series Optional Flush Mount Plate Available Up to PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

9 TYPHOON 3 Co m m erc i a l Gra d e S u rg e P ro t e c t i o n T1AC1/T1AC2 & T2AC1/T2AC2 Series T1AC21SM TOAC2A-4-N* TOAC2-4-N 2 Kaic T1AC1A-4-N* T1AC1-4-N 2 Kaic T2AC1A-4-N* T2AC1-4-N 2 Kaic T1AC2A-4-N* T1AC2-4-N 2 Kaic T2AC2A-4-N* T2AC2-4-N 2 Kaic T1AC21SM2A-4-N* 2 Kaic * Denotes model numbers with form C N/O N/C Dry Contacts PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

10 TYPHOON 4 Co m m erc i a l Gra d e S u rg e P ro t e c t i o n O V E R V I E W : The PSP Vortexx AMV Series features All-Mode AC surge F E AT UR E S suppression solutions with sine wave tracking circuitry for EMI/ RFI filtering. Available in a variety of service voltage configurations, the AMV Series is the ideal choice when applications require all-mode suppression and filtering capabilities. True 1 Mode Device on 3 phase products. The AMV Series utilizes metal oxide varistors (MOVs) to protect your sensitive electronic equipment from the devastating effects of transient voltage surges. Each phase includes an LED status indicator to show protection status. LED on indicates suppressor is functional. LED off indicates suppressor or AC power failure. Form C contacts are standard. UL rd Edition September 29, 29 UL1283 listed Form C Relay contacts included Push-to-test diagnostics EMI/ RFI filtering sine wave tracking circuitry Individual thermal fusing and MOV components Fused disconnect option Sine Wave Tracking Circuitry T1AM4-4-N* T1EAM4-4-N* 8535 Phoenix Drive, Manassas VA 211 PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

11 TYPHOON 4 C o m m erc i a l Gra d e S u rg e P ro t e c t i o n T1AM4-4-N* T1EAM4-4-N* T2AM4-4-N* T2EAM4-4-N* T3AM4-4-N* T5AM4-4-N* T4AM4-3WG-4-N* 1 3, Amps/Phase PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

12 TYPHOON 5 Co m m erc i a l Gra d e S u rg e P ro t e c t i o n The Next Generation Of Surge Suppression systems O V E R V I E W : The Vortexx-Cap surge suppression module is used either as a stand alone protection element integrated inside larger systems or within PSP Transient Voltage Surge Suppressor Systems. It incorporates a single, heavy duty, distribution grade Metal Oxide Varistor (MOV) disk, assembled under pressure in an environmentally sealed aluminum casing. Vortexx-Cap s unique design provides very low internal contact resistance, excellent thermal management of the MOV and uniform distribution of the surge current over the total area of the protection element, thus resulting in an extremely high energy handling capability combined with very low let-through voltages. Vortexx-Cap s patented design minimizes the effects of aging and completely eliminates the risk of catastrophic failure, explosion or fire, which are common in conventional surge protection devices. Vortexx-Cap incorporates state-of-the-art MOV.technology developments providing superior protection characteristics, which remain unchanged throughout its long service life. The module has been designed in order to withstand repeated surges providing a cost effective and maintenance free operation in harsh environments. Independent test data confirms that a 4mm Vortexx-Caps module can withstand 1 ka strikes with % change in clamping voltage. The 8mm Vortexx module can withstand strikes up to 2 ka safeguarding critical electronic infrastructure against any potential threat. Vortexx-Cap is the only UL rd edition, recognized surge protection module in the industry rated for safe operation without the use of additional internal fuses. This unique feature combined with its capability to be directly connected to the power lines or bus bars (in-line connection), makes it the most reliable surge protection device known and insures that critical electronic equipment will remain protected at all times. PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

13 TYPHOON 5 Co m m erc i a l Gra d e S u rg e P ro t e c t i o n MODEL (SERIES) T-1 T-2 T-3 T-4 T-5 T-6 T-7 T-8 T-9 Nominal Line Voltage 12/24 12/28 24/12 277/48 48D 347/6 6D 22/38 24D MCOV 15V 15V 3/15V 35V 6V 48V 75V 25V 25V Voltage Protection Rating (VPR) Per UL1449, 3rd Ed. 6V 6V 9/6V 12V 18V 15V 2V 9V 9V Let Through Voltage Level for Surge Current 1kA (8/2) (IEEE C ) 45V 45V 8 / 45V 93V 165V 126 / 21V 21V 8 / 126V 8V Operating Frequency Operating Temperature EMI/RFI Noise Rejection Fault Current Tested to 5 Hz -4 TO +185 F (-4 TO +85C) Up to -5dB all Models 1KA / 2 ka Duration Performance 1kA square waveform 2msec (IEEE C62.11) 25hits 5A square waveform 2msec (IEEE C62.11) 25hits Audible Alarm Remote Signaling Response Time Product Max. Surge Current/Phase Enclosure Rating Surge Counter Connection Weight Diagnostics Yes Form C Dry Contacts < 1 Nano Seconds LifeTime-Warranty 3 Models 3, Amps/Phase 4, Amps/Phase 6, Amps/Phase NEMA 4 - IP65 Yes Terminals #6-#4/ AWG 3,Amps/Phase = 5 lbs. 4,Amps/Phase = 6 lbs. 6,Amps/Phase = 7 lbs. Red and Green LED s, Push to test buttons, Dry Contacts Audible Alarm and Alarm Silence Button. 8 MM Modules with optional external disconnect OPTIONS Safety Features Optional Housings Fused Safety Disconnect Stainless Steel Housing / 4X HousingAvailable 4 MM Module Internal rail mount Assembly PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

14 C o m m e r c i a l G r a d e S u r g e P r o t e c t i o n NEMA4 Nipple Mount Flush/Surface Mount NEMA4X Hard-Wired with Fused Disconnect & Surge Counter O V E R V I E W : The Hurricane 3 Series Surge Suppression device is the culmination of years of technological research and innovation. The Hurricane 3 provides state of the art protection in 1, 2 and 3 ka/phase configurations. Adaptable to many different voltages and Delta and WYE configurations, the Hurricane 3 is suitable for almost any TVSS need or environment. The Hurricane 3 provides protection in all modes, L-N, L-G, N-G AND L-L plus noise filtration up to -5dB. Its robust yet compact Nema 4 metal enclosure is suitable for both indoor and outdoor installations. Utilizing high-energy MOVs and EMI/RFI filtering, the Hurricane 3 will protect against transients originating from induced lightning strikes, utility switching or internal motor operation. The Hurricane 3 s internal SCCR (Short Circuit Current Rating) of 2 ka makes it capable of being installed in both Service and Branch panel applications without the need for cumbersome inline fusing. F E AT U R E S : UL1449 3rd Edition listed cul listed Multiple International Listings 4 Levels of Protection LED Status Indicators Audible Alarm NO/NC Dry Contacts NEMA 4 - (Nipple Product) NEMA 4X (option) Noise Filtration Sine Wave Tracking Circuitry 2 kaic Fault Current Rated Surge Counter (option) Integral Fused Disconnect (option) 1-Year Warranty PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

15 HURRICANE 3 Co m m erc i a l Gra d e MODEL (SERIES) H1C H2C H3C H4C H5C H6C H7C H8C H9C Nominal Line Voltage 12/24 12/28 24/12 277/48 48D 347/6 6D 22/38 24D MCOV 15V 15V 3/15V 35V 6V 48V 75V 25V 25V Voltage Protection Rating (VPR) Per UL1449, 3rd Ed. 6V/9V 6V 9V/6V 12V 18V 15V 2V 9V LetThrough Voltage Level for Surge Current 1kA (8/2) (IEEE C ) 45V 45V 8/45V 93V 165V 126V 21V 8V 8V Operating Frequency Operating Temperature EMI/RFI Noise Rejection Fault Current Fusing Pulse Life SINE Wave Tracking UL 1283 Protection Modes Audible Alarm Remote Signaling Nipple Product Wire Size Response Time Product Warranty Max. Surge Current/Phase 5/6/4 HZ -4 TO +185 F (-1 TO +85C) Up to -5dB all Models 2, kaic Fusing/Mode 5, CAT C3 Surges without Drift Compliant Yes L-N, L-G, N-G, L-L Yes Form C Dry Contacts #1 AWG, 24 Leads < 5 Nano Seconds 1 Years 3 Models 1, Amps/Phase - 5, Amps/Mode, L-N, L-G, N-G, L-L 2, Amps/Phase - 1, Amps/Mode, L-N, L-G, N-G, L-L 3, Amps/Phase - 15, Amps/Mode, L-N, L-G, N-G, L-L NEMA 4 Nipple NEMA 4X disconnect NEMA 1 - Surface Mount / Flush Mount OPTIONS Safety Features Enclosure Rating Surge Counter Connection Weight Diagnostics Additional Enclosures Fused Safety Disconnect Nipple product; NEMA 4. Hardwire; NEMA 4X /NEMA1 Optional on all models #1 AWG wires NEMA 4 - Terminals.#1- NEMA 4 = 4 lbs.; NEMA 4X Hard Wired w/o disconnect = 15 lbs. NEMA 4X Hard-wired w/disconnect = 16 lbs.flush Mount 15Lbs Green Status LED s per phase w/audible alarm & dry contacts Stainless Steel, Flush-mount, NEMA1 *Drawings not to scale. PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

16 HURRICANE 5 C o m m e r c i a l G r a d e S u r g e P r o t e c t i o n O V E R V I E W : The Hurricane 5 Series Surge Suppressors provide high risk surge suppression capability at your facility s service entrance for both conducted (1/35µs) and induced (8/2 µs) transient over voltages originating from such sources as lightning strikes and utility switching. These protectors incorporate reliable high intensity replaceable modules (per mode) with individually monitored and fused MOVs. Designed to various national and international standards, the Hurricane 5 Series products are ideal as a global protection solution. The Hurricane 5 Series products come in five models, 1, Amp, 2, Amp, 3, Amp, 4, Amp and 6, Amp, and are versatile and scaleable to meet an array of engineering designs. The Hurricane 5 Series products are housed in a NEMA4 enclosure and they come standard with a 2kAIC rating to meet the most demanding needs. Noise filtration up to -5dB is incorporated providing protection in all modes and is available with or without a fused disconnect to meet all applications. Mode Level Field Replaceable Modules Available in Four, Seven and Ten Mode Configurations Eliminate Down Time & Keep Equipment Protected F E A T U R E S : UL1449 3rd Edition listed cul listed LED Status Indicators Audible Alarm Push To Test NO/NC Dry Contacts NEMA4 & Nema4X Enclosure Noise Filtering Sine Wave Tracking Circuitry Fused Safety Disconnect Switch (Option) Available in 4-7 & 1 Mode Design Heavy Duty Modular Construction Individual Modules Replaceable By Mode Digital Surge Counter 1 Year Warranty PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

17 HURRICANE C o m m e r c i a l G r a d e S u r g e P r o t e c t i o n MODEL (SERIES) H1C H2C H3C H4C H5C H6C H7C H8C H9C Nominal Line Voltage 12/24 12/28 24/12 277/48 48D 347/6 6D 22/38 24D MCOV 15V 15V 3/15V 35V 6V 48V 75V 25V 25V Voltage Protection Rating (VPR) Per UL1449, 3rd Ed. 6V 6V 9/6V 12V 18V 15V 2V 9V 9V Nominal Discharge Current (In): 8/2 2KA 2KA 2KA 2KA 2KA 2KA 2KA 2KA 2KA Model Number: HXC1 HXC15 HXC2 HXC25 HXC3 HXC35 HXC4 HXC6 Max. Discharge Current (Imax) 1KA 15KA 2KA 25KA 3KA 35KA 4KA 6KA Operating Frequency Operating Temperature 5/6/4 HZ -4 TO +16 F (-1 TO +7C) 2, surge amp product / with or without disconnect *Drawings not to scale EMI/RFI Noise Rejection Up to -5dB all Models Fault Current Fusing 2, kaic Pulse Life 5, CAT C3 Surges without Drift SINE Wave Tracking Yes UL 1283 Compliant Protection Modes L-N, L-G, N-G, L-L (where applicable) Audible Alarm Remote Signaling Yes Form C Dry Contacts 4, and 6, surge amp product / with or without disconnect Response Time < 5 Nano Seconds Product Warranty 1 Years Max. Surge Current/Phase 8 Models Connection Weight Enclosure Ratings Surge Counter Diagnostics Options 1, Amps/Phase 5, Amps/Mode, L-N, L-G, N-G, L-L 2, Amps/Phase 1, Amps/Mode, L-N, L-G, N-G, L-L 25, Amps/Phase 125, Amps/Mode, L-N, L-G, N-G, L-L 3, Amps/Phase 15, Amps/Mode, L-N, L-G, N-G, L-L 35, Amps/Phase 175, Amps/Mode, L-N, L-G, N-G, L-L 4, Amps/Phase 2, Amps/Mode, L-N, L-G, N-G, L-L 6, Amps/Phase 3, Amps/Mode, L-N, L-G, N-G, L-L Terminals #1-#2 AWG 1, - 15, Amps/Phase = 25 lbs. 2, - 25, Amps/Phase = 26 lbs. 3, -35, Amps/Phase = 27 lbs. 4,Amps/Phase = 28 lbs. 6,Amps/Phase = 38 lbs. NEMA 4, and 4X Version Yes Red-Green LED s, Dry Contacts, Audible Alarm, and Push To Test Nema 4X Enclosure - Fused Internal & External Safety Disconnect Field Replaceable by Modules. No Tools Required, No wires To disconnect PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

18 Typoon Large Thermal Capacity Electrodes Strong Aluminium Housing 15+ Pounds of Pressure Vortexx-Cap Vortexx-Cap P H : F A X : e m a i l : sales@pspproducts.com 8535 Phoenix Dr., Manassas, VA 211 No Fuel to Burn Low Dynamic Resistance & Low Residual Voltage Single, Distribution- Grade Varistor - No

19 DC Signal Line Surge Protectors MJ8 Series lmax 2-4kA Dimensions (in mm) (Screw Lug) MJ8-CAT5E Electrical Diagram (Din Rail Option) The MJ8 Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. P: 3-electrode gas tube D: 2-pole diode P D The MJ8 Series surge protector is deployed in a RS-485 signal network applications with data transmission speeds of up to1 Mbps. The surge protector is housed in a shielded enclosure with high quality shielded RJ45 jacks. The transient protection circuit is based on high energy gas discharge tubes (GDT) and a network of fast response silicon avalanche diodes (SAD) to achieve sharp clamping of very large surge events. 2 1 (MHz) Insertion Loss MHz 4 Characteristics 6 (db) PSP part number MJ8-CAT5E MJ8-12V MJ8-ISDN MJ8-17V Max. data rate 1 Mbps 1 Mbps 1 Mbps 1 Mbps Max. DC Supply 8 Vdc 18 Vdc 6 Vdc 18 Vdc 6 ma 6 ma 6 ma 6 ma 2 Pinouts (1-2) (3-6) (1-2) (3-6) (3-6) (4-5) (1-2) (3-6) (4-5) (7-8) (4-5) (7-8) (4-5) (7-8) Nominal discharge currents: 4 -Line/Line 2 8/2 -Line/Ground 2 8/2 6 Connections: -input -output Pinout Enclosure Ground Connection Standard Compliance Shielded RJ Connectors Shielded RJ Connectors 2 wires + shielding + ground Metal Screw Lug, Din Rail Clip or Mounting Flange IEEE 82-3af (transmission) IEC (surge withstand) 8 (db) 1 (MHz) 1 (MHz) Return Loss 2 1 MHz NEXT 2 1 MHz 4 6 (db) red curve: maximum limit PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

20 Residential Light Commercial Applications GEN-16-SER Service Entrance Rated Generator Transfer Switch Surge Protector Type 1 Device - No Breaker Required For Installation GEN-16-SER Overview Green Light Indicates Protection is Active The GEN-16-SER is designed to be the first line of defense against damaging electrical surges and spikes originating from utility power lines. The GEN-16-SER is U.L. Approved and designed for installation at the Utility Entrance of the generator transfer switch. providing robust protection for both the transfer switch and the whole home against damaging electrical surges and spikes. Generator Transfer Switch Surge Protector Phone UL Approved for Installation on Service Entrance Side of Generator Transfer Switch before main breaker GEN-16-SER Transfer Switch Protector Features UL Approved for installation on the service entrance side of Generator Transfer Switches. Flush mount plate option available for finished walls. Common mode suppression with 16, Surge Amp Capacity. Thermal fused metal oxide varistor (MOV) suppression technology. Light-emitting diode (LED) visual indicator for transfer switch protection status. Type 4 Enclosure suitable for transfer switches installed inside or outdoors. Provides whole house surge protection. PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

21 GEN-16-SER Service Entrance Rated Generator Transfer Switch Surge Protector GEN-16-SER Specifications Electrical Model Surge Protection Device (SPD) Type to UL Operating AC Voltage Maximum Continuous Operating AC Voltage (MCOV): Line-Neutral Nominal Discharge Current [I n ] Line-Ground Neutral-Ground Line-Line Maximum Surge Current Capacity [I ]: Line-Neutral max Fault Current Rating Voltage Protection Rating (VPR): Suppression Technology Mechanical Line-Ground Neutral-Ground Line-Line Line-Neutral Line-Ground Neutral-Ground Connection Terminal (Suppression) Hardwired Operation Temperature ( C) Enclosure Type (Outdoor) Enclosure Dimension (L W H) Weight Line-Line GEN-16-SER Type 1 Service Entrance Rated 12/24V Single Phase 3W+G 14 V 14 V 14 V 28 V 2 ka 8 ka 8 ka 8 ka 1 ka 1kA No Breaker 2ka With Breaker 6 V 6V 6 V 1V MOV #12 AWG pigtail leads -4 C to +8 C Type 4 PVC Plastic [ mm] 2.5 lbs [1.81 kg] Pr oduc t Diagram [294.14] [62.31] 2.45 [11.6] 4. [8. [32.46] [5.8] [8. [5.8] 2. [13.43] [mm] inches Optional Flush Mount Cover PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

22 Commercial Surge Protection Devices Din Rail Surge Protection A.C. Din Rail Products. Available from 4, to 2, surge amp capacity. Dry contacts and visual indicators available on all products. Noise filtration assemblies available in all voltages. Din Rail DC Power Surge Protector DC Surge Protection From 12 to 35 Volts DC These devices are based on high energy varistors (MOV) matched with the DC operating voltage (from 12 to 35 Vdc). The MOV are equipped with internal thermal disconnectors in order to provide safe end of life. Din Rail In-Line Data Surge Devices 2 and 4 pair Series Din Rail Surge Protection for Telephone ADSL/SDSL- SHDSL, ISDN, Fipway, Fieldbus-H2, 4-2mA, RS232 & RS485, MIC/T2 1BaseTProducts. Available from 6 to 15 DC voltage. 2, surge amp capacity. Pop out field replaceable modules. CCTV & Cable Protection The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment. Available in a broad selection of connector types. Two/Four Pair Data Line Protector RJ45/RJ45 POE Surge Protector Modulse B18/48 series are wall mount DC signal line surge protectors designed to protect your sensitive telephone, data com and instrumentation equipment against harmful lightning surges and electrical transients The MJ8/MJ8POE Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. The transient protection circuit is based on high energy gas discharge tubes (GDT) and a network of fast response silicon avalanche diodes (SAD) to achieve sharp clamping of very large surge events. Type 1 PV Surge Protectors 1CA DC Photovoltaic Surge Protectors 5 to 1 Volts DC with 4, Amps Imax Plug Strips & Point of Use Devices Commercial grade plug strips and point of use devices available Type 1 UL 1CA DC SPD with High Energy MOV s, Imax 4 ka modular design with UL th edition listing. Available in 5, 6, 8 and 1 Volts DC configurations. Din Rail Mountable.

23 PSP Model Number Nomenclature Hurricane Series Selection Chart Voltage Selections 1 = 12/24 Volt Single Phase WYE 2 = 12/28 Volt Three Phase WYE 3 = 12/24 Split Phase Delta High Leg 4 = 277/48 Volt Three Phase WYE 5 = 48 Volt Delta 6 = 347/6 Volt Three Phase WYE 7 = 6 Volt 3 Phase Delta 8 = 22/38 Volt Three Phase WYE 9 = 24 Volt 3 Phase Delta Fault Current Selections A=22 KAIC C=2 KAIC Surge Current Selections 1 = 1, Amps Per Phase 2 = 2, Amps Per Phase 3 = 3, Amps Per Phase 4 = 4, Amps Per Phase 6 = 6, Amps Per Phase Enclosure Selections 1 = NEMA 1 4 = NEMA 4 4X=NEMA4X 4XSS = NEMA 4X Stainless Steel Connection Selections N = Straight Nipple (Cooper 651S) With #1 Wire SFM = Surface Flush Mount Hardwire HW = Hard Wire HWD = Hardwire With Disconnect MHW = Modular Hardwire MHWD = Modular Hard Wire With Disconnect C = Surge Counter Hurricane Series Example H2C2-4-N-C H = Hurricane Series, 2 = 12/28 Volt Three Phase WYE C = Fault Current 2 KAIC, 2 = SURGE CURRENT 2, PER PHASE 4 = Enclosure NEMA 4 N = Connection Straight Nipple With #1 Wire C = Surge Counter PSP Products Inc Phoenix Drive, Manassas VA sales@pspproducts.com

24 1 Year Warranty PSP Products will, at its option, repair or replace any Vortexx brand. product that is defective or is damaged by an electrical surge (including those caused by lightning) for a period of ten (1) years from date of purchase. For technical assistance call The above coverage applies to the original end user purchaser only and is the exclusive remedy under this warranty, whether based in contract, tort, including negligence, or otherwise. Claims must be made within 3 days of damage. This warranty does not cover damage associated with sustained over voltages, vandalism, theft, normal wear and tear, obsolescence, abuse, no authorized, modification or alteration, misuse, improper installation or catastrophic events. Except as expressly provided by this warranty. PSP Products disclaims liability for any incidental, indirect, special or consequential damages arising out of the sale or use of any PSP products (including without limitation lost business profits, loss of data and all freight, mileage, travel time and insurance charges associated with warranty coverage claims). Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state. This warranty is valid in the United States and Canada only. PSP Products Inc. P.O. Box 418 Manassas, VA 218