Workshop equipment.

Transcription

1 Workshop equipment european europäischer manufacturer of hand tools since

2 Contents: 1 Tool Carriages 2 2 Tool Chests 18 3 Workbenches 22 4 Tool Cabinets 30 5 Tool Boxes 36 6 Wardrobe Cabinets 42 7 Tool Tray Sets 45 8 Spare Parts 48 UNIOR is the leader in the quality hand tool field for professional and end users. The Unior Joint Stock Company is one of the largest and most important European manufacturers of hand tools, drop forgings and machine tools. Our dependable performance is based on the rich tradition of Slovenian forging. This tradition, coupled with up to date expertise, ensures innovative and top quality products. Permanent compliance with the highest European and World standards maintains and strengthens the company s position as an important international provider of quality products and services in the field of the metal processing industry. Today the company is highly regarded and employs state of the art production processes and people with exceptional experience and knowledge.

3 TOOL CARRIAGES TOOL CARRIAGES EuroPLUS Tool Carriage An innovative carriage Accessories The era of lifeless and always chaotic workshops is over once and for all. Today workshops should be tidy, and the look of equipment and a pleasant atmosphere in the work environment play an ever more important role. A model example of this new generation is EuroPLUS, the carriage of modern design, recognizable by soft and clear lines. Its round edges prevent injuries in the event of accidental collisions and represent an additional safety feature for the carriage as well as the environment. A number of innovative solutions and the use of top-quality materials make it a multipurpose product, which will fulfil the expectations of even the most demanding users. Paper holder Paper holder, available in two versions, ensures that paper is always close at hand (920 ES4A, 61944). The lock is positioned inside the frame, within the outside edges of the carriage. Thus, when inserted, the key cannot be damaged and due to its flexibility it does not cause obstructions when handling the carriage. The plastic plate has a special design, making the work surface 20 % larger. It is also recessed by 10 mm so that small parts do not accidentally roll off the carriage. The plate also features three storage recesses. Pull-out shelf (290 x 350 mm) can be used to support documents or other items. When not needed it can be simply pushed back in. Load capacity is 10 kg. 10 kg Tool rack wall A perforated sheet metal tool rack wall for hanging tools and other accessories can be attached to the EuroPLUS carriage (920.1, ). New 400 mm ball-bearing slides are of higher quality compared to standard models. This means load capacity increased by 10%, while the drawer still runs smoothly and almost inaudibly. Drawers can be taken out easily with a simple push of the plastic safety buttons. 28 kg Perforated sheet steel on the side walls is a convenient place to hang tools and other accessories. Partitions EuroPLUS carriage drawers can be divided freely into different sized parts by installing partitions (920 ES3, ). ANTI-SLIP covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. Side walls have waste baskets. Carriage corners are strengthened by antishock rubber protectors, protecting the carriage and the environment from damage. Tool trays Plastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey Drawer closing mechanism prevents unwanted opening of drawers. Durable 125 mm diameter wheels with a safety brake enable mobility and stability, even if rolled fully loaded over a cable. Proper rolling stability is very useful especially on uneven workshop floors or in the yard. 100% pull-out drawers enable a good overview and easy access to tools. They are 75 mm or 155 mm high with a load capacity of 43 kg (large drawer). The carriage is lacquer coated to enable a firm grip and resist rusting. Metal parts of the carriage are doubly protected by ecological coating with cadmium and. The basic blue colour (RAL 5015), combined with grey (RAL 7036) gives the carriage an attractive and distinguishable look. 2 3

4 TOOL CARRIAGES TOOL CARRIAGES EuroSTYLE Tool Carriage Infinite combinations Accessories Let s face it a carriage that satisfies the needs of every single user does not exist. Therefore, Unior has developed the EuroSTYLE series with a broad range of different accessories, enabling users to adapt the final version of the carriage to fit their type of work. The EuroSTYLE series is being constantly perfected and is therefore very popular with craft masters. Their work becomes more efficient, since the carriage is adapted to fit them and not the other way around. Let there be no doubt who is the master! Drawer chests Drawer chests specially designed for EuroSTYLE will transform the tool carriage into a real tool cabinet. Partitions By installing partitions (940 ES3, ) drawers can be divided freely, providing for a better overview. 100% pull-out drawers enable a good overview and easy access to tools. They are 75 mm or 155 mm high, with a load capacity of 40 kg (large drawer). Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. Tool trays Plastic (965) or *SOS (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey 25 kg Carriage cover plate Basket A net or a sheet steel basket can be installed into the carriage. net basket ( 940 ES1, ) sheet steel basket ( 940 ES2, ) A special model of the EuroSTYLE carriage (940E4/1L) features perforated sheet steel sides serving as extra surface for hanging tools and other accessories. The cover, originally protected with a synthetic coating can be covered by a polystyrene plate (608972) or a wooden plate (608973). 15 kg 10 kg Finishing plate The EuroSTYLE carriage can be extended by a finishing plate, without using its work surfaces. Finishing plate load capacity is 15 kg (940 ES6, ). Bottle holder The holder can hold up to 10 kg of glass bottles, oil cans or plastic bottles (940 ES7, ). The lock is installed on the side wall, just under the handle. Thus the key cannot be damaged and due to its flexibility does not cause any obstructions when handling the carriage. The 100 and 150 mm diameter (E9) wheels with a safety brake enable mobility and stability, even on uneven workshop floors or in the yard. The 400 mm ball-bearing slides are of higher quality, compared to standard models. This means load capacity increased by 10 %, while the drawer still runs smoothly and almost inaudibly. Drawers can be taken out easily with a simple push of the plastic safety buttons. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) gives the carriage an attractive and distinguishable look. Paper holder The paper holder is available in two versions: small ( 940 ES4, ), big ( 940 E4A, ). Document holder 940 ES5,

5 TOOL CARRIAGES TOOL CARRIAGES 920 PLUS1 Tool carriage EuroPLUS 940 E1 Tool carriage EuroSTYLE 940 E4 Tool carriage EuroSTYLE 940 E4/1L Tool carriage EuroSTYLE new protective closing mechanism of drawers multipurpose shelf new wheels Ø 125mm, for improved agility and stability anti-shock rubbers perforated sheet metal the synthetic covering protect drawers and tools from damage 8 drawers (7 dim. 585 x 405 x 75 mm, 1 dim. 585 x 405 x 155mm) static load capacity of carriages without wheels: 2000 kg capacity of small drawers: 28 kg capacity of large drawers: 43 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 4 drawers (3 dim. 585 x 405 x 75mm, 1 dim. 585 x 405 x 155mm) lifting door with static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 7 drawers (5 dim. 585 x 405 x 75 mm, 2 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 7 drawers (5 dim. 585 x 405 x 75 mm, 2 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg left and right side are perforated include 10 hooks dim. 500 mm plastic tray on the top of the carriage PLUS2 Tool carriage EuroPLUS 940 E3 Tool carriage EuroSTYLE 940 E6 Tool carriage EuroSTYLE 940 E9 Tool carriage EuroSTYLE new protective closing mechanism of drawers multi-purpose shelf new wheels Ø 125mm, for improved agility and stability anti-shock rubbers perforated sheet metal the synthetic covering protect drawers and tools from damage 7 drawers (5 dim. 585 x 405 x 75 mm, 2 dim. 585 x 405 x 155 mm) static load capacity of carriages without wheels: 2000 kg capacity of small drawers: 28 kg capacity of large drawers: 43 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 6 drawers (3 dim. 585 x 405 x 75 mm, 3 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 8 drawers (7 dim. 585 x 405 x 75 mm, 1 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 8 drawers (6 dim. 585 x 405 x 75 mm, 2 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg

6 TOOL CARRIAGES TOOL CARRIAGES EuroVISION Tool Carriage For most demanding users The EuroVISION tool carriage series is the latest addition to Unior product range. The carriage is distinguished by its functionality and modern design, which follows the latest trends. In this context, Unior has developed a drawer handle, which can be gripped from the top side, making the tools in the drawer much easier to access. Large 125 mm diameter wheels ensure mobility, stability and safety. A broad range of accessories enables users to adapt the final version of the carriage to fit their requirements. 100% pull-out drawers enable a good overview and easy access to tools. They are 75 mm or 155 mm high, with a load capacity of up to 40 kg. Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. Special ANTI-SLIP covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. 25 kg ANTI-SLIP covering offers damage protection for the cover plate, as it prevents tools from sliding and at the same time protects the carriage sheet steel parts in the event of accidental impacts. The plate can be additionally covered by an ABS plate (608972) with special compartments for storing bottles, oil cans, screws, nuts and other equipment. Accessories Partitions By installing partitions (940 ES3, ) drawers can be divided freely, providing for a better overview. Tool trays Plastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey Basket A net or a sheet steel basket can be installed into the carriage. net basket ( 940 ES1, ) sheet steel basket ( 940 ES2, ) The lock is installed on the side wall, just under the handle. Thus the key cannot be damaged and due to its flexibility does not cause any obstructions when handling the carriage. 15 kg Finishing plate The EuroSTYLE carriage can be extended by a finishing plate, without using its work surfaces. Finishing plate load capacity is 15 kg (940 ES6, ). The 400 mm ball-bearing slides are of higher quality, compared to standard models. This means load capacity increased by 10 %, while the drawer still runs smoothly and almost inaudibly. Drawers can be taken out easily with a simple push of the plastic safety buttons. 10 kg Bottle holder The holder can hold up to 10 kg of glass bottles, oil cans or plastic bottles (940 ES7, ). Document holder 940 ES5, Durable 125 mm diameter wheels with a safety brake enable mobility and stability, even if rolled fully loaded over a cable. Proper rolling stability is very useful especially on uneven workshop floors or in the yard. High quality and functionally designed drawe rs feature elegant handles which enable the drawers to be opened from the top. The drawers come in two different sizes and two heights - 75 mm or 155 mm. A strong construction design enables a load capacity of 40 kg. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and lead free colour for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) gives the carriage an attractive and distinguishable look. Paper holder The paper holder is available in two versions: small ( 940 ES4, ), big ( 940 E4A, ). 8 9

7 TOOL CARRIAGES TOOL CARRIAGES HERCULES Tool Carriage Tool Carriage or Work Bench? Both! The Hercules composite panel is not intended only for laying aside tools and workpieces. Due to its heavy-duty construction it can be used as a work bench. The space underneath it is used most efficiently. Its numerous drawers and storage shelves make HERCULES a real»miniature«workshop. A paper holder is included in the basic version. The work surface is made entirely out of wood, giving the already robustly built system additional strength and durability. Beside the basic model with drawers, two models with shelves on the side are available. The shelves have high load capacity and are suitable for storing larger items. Accessories Partitions By installing partitions drawers can be divided freely into different sized parts. Partitions come in two sizes, for small and for large drawers. The latter are slightly longer. small (940 HS3, ) large ( 940 ES3, ) Large paper holder Install the holder if you need large towel rolls close at hand (940 HS4A, ). The lock is installed on the side wall, just under the handle, enabling better mobility and protecting the inserted key and the lock from possible damage. Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. 25 kg Basket A net or a sheet steel basket can be installed to the carriage. net basket (940 ES1, ) sheet steel basket ( 940 ES2, ) 25 kg 350 and 400 mm ball-bearing slides are of higher quality, compared to standard models. This means load capacity increased by 10 %, while the drawer still runs smoothly and almost inaudibly. The slide design enables the drawers to be taken out easily with a simple push of the plastic safety buttons. Two types of waste baskets are available: net or sheet steel. Tool trays Plastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey Large 125 and 160 mm diameter wheels, two with safety brakes, enable mobility and stability and further reinforce the rolling capacity, which is very useful especially on uneven workshop floors or in the yard. Drawers come in two heights: 75 mm or 155 mm. Strong construction design enables a load capacity up to 40 kg. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) give the carriage an attractive and distinguishable look

8 TOOL CARRIAGES TOOL CARRIAGES EuroMASTER Tool Carriage Accessories Safely stored A special feature of the EuroMASTER carriage is slide cover plates with a. Underneath them is a large storage surface, suitable for storing larger tools. The closed cover plates are simultaneously a useful work surface, since each part of the cover has a load capacity of 80 kg. Just underneath the cover plates is a handy slide drawer and when the covers are slid to the side we get a large, well-organised space for putting down tools. Besides the basic EuroMASTER model, two other models with one or two shelves in the middle are available. The on the slide cover locks the small drawers under the cover. Model 940 M1 features an additional lock for large drawers. 80 kg The carriage cover is made of two parts with a load capacity of 80 kg each when closed, and 32 kg when open. 32 kg Partitions By installing partitions drawers can be divided freely into different sized parts (940 ES3, ). Bottle holder The holder can hold up to 10 kg of oil cans or plastic bottles, paint cans or similar objects. Tool trays Plastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey The shelf in the middle is a supporting shelf and can be used to store larger items. Drawers come in two heights: 75 mm or 155 mm. Strong construction design enables a load capacity of 40 kg, while a synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. 940 M1 Tool carriage EuroMASTER The movable drawer can be slid freely, so that it is never in the way. It is used for storing smaller objects. 25 kg Small plastic inserts on the side are used to store nuts, screws and other small objects. The handle is made of high quality sheet steel with a 25 diameter round profile. 400 mm (drawers) and 700 mm (cover) ball-bearing slides are of high quality and enable high load capacity, while the drawer still runs smoothly and almost inaudibly. The drawers can be taken out easily with a simple push of the plastic safety buttons. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) give the carriage an aesthetic and distinguishable look. 100 mm diameter wheels with a safety brake enable mobility and stability even when used on uneven workshop floors or in the yard. 4 wheels, one with brake the synthetic covering protect drawers and tools from damage lacquered with cadmium and 6 drawers (5 dim. 585 x 405 x 75 mm, 1 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg load capacity on each part of closed cover: 80 kg, on opened 32 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg with botle holder and plastic insert for small parts

9 TOOL CARRIAGES TOOL CARRIAGES 940 M2 Tool carriage EuroMASTER 940 H1 Tool carriage HERCULES 940 H2 Tool carriage HERCULES 940 H3 Tool carriage HERCULES 4 wheels, one with brake the synthetic covering protect drawers and tools from damage 3 drawers (2 dim. 585 x 405 x 75 mm, 1 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg load capacity on each part of closed cover: 80 kg, on opened 32 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg (2 security locks) 4 wheels, two with brake the synthetic covering protect drawers and tools from damage lead free colour 7 front drawers dim. 585 x 408 mm (5 height 75 mm, 2 height 155 mm) 7 side drawers dim. 425 x 367 mm (5 height 75 mm, 2 height 155 mm) wooden work top static load capacity of carriages: 2300 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, two with brake the synthetic covering protect drawers and tools from damage 7 front drawers dim. 585 x 408 mm (5 height 75 mm, 2 height 155 mm) door with lock wooden worktop static load capacity of carriages: 2300 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, two with brake the synthetic covering protect drawers and tools from damage lead free colour 7 front drawers dim. 585 x 408 mm (5 height 75 mm, 2 height 155 mm) one side with shelves wooden worktop static load capacity of carriages: 2300 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg M3 Tool carriage EuroMASTER 940 EV1 Tool carriage EuroVISION 940 EV4 Tool carriage EuroVISION 940 EV6 Tool carriage EuroVISION 4 wheels, one with brake the synthetic covering protect drawers and tools from damage model with one shelf static load capacity of carriage without wheels: 1600 kg load capacity on each part of closed cover: 80 kg, on opened 32 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the covering protect drawers and tools from damage possibility to add accessories lead free colour 4 drawers (3 dim. 585 x 405 x 75mm, 1 dim. 585 x 405 x 155 mm) lifting door with static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 7 drawers (5 dim. 585 x405 x 75 mm, 2 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg 4 wheels, one with brake the synthetic covering protect drawers and tools from damage possibility to add accessories lead free colour 8 drawers (7 dim. 585 x 405 x 75mm, 1 dim. 585 x 405 x 155 mm) static load capacity of carriage without wheels: 1600 kg capacity of small drawers: 25 kg capacity of large drawers: 40 kg

10 TOOL CARRIAGES TOOL CARRIAGES Economic Tool Carriage 940/2 Tool carriage 994 Mobile desk Everything close at hand in the home workshop. The Economic tool carriage is intended for home users. Its compact design makes it suitable for smaller rooms, while its 6 drawers offer enough space to introduce order into the home workshop. Large wheels on an extra strong undercarriage enable high carriage mobility. High quality and functionally designed drawers measure 520 x 350 mm and come in two heights 75 mm or 155 mm. The basic model has 4 low and 2 high drawers, which can easily store larger tools. Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. 4 wheels, one with brake the synthetic covering protect drawers and tools from damage lead free colour room for storage of larger tools 4 drawers accessible from either side independent sliding doors on either side two drawers two mobile wheels with brake wooden working surface on top /3 Tool carriage The sheet steel cover plate is protected with a synthetic covering. The plate is recessed, so tools cannot slide off while manoeuvring the carriage. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and for additional protection. The basic red colour, combined with black give the carriage an attractive look. 300 mm ball-bearing slides enable higher load capacity compared to standard models, while the drawer still runs smoothly and almost inaudibly. The drawers can be taken out easily with a simple push of the plastic safety buttons. The lock is positioned so that it does not obstruct closing of the drawers. The key is flexible and thus does not get in the way even when it is in the lock. Accessories 100 mm diameter wheels with a safety brake enable mobility and stability even when used on uneven workshop floors or in the yard. Partitions By installing partitions drawers can be easily and freely divided into different sized parts. 4 wheels, one with brake the synthetic covering protect drawers and tools from damage room for storage of larger tools 3 drawers accessible from one side independent sliding doors on one side

11 TOOL CHESTS TOOL CHESTS Tool Chests Order both inside and out Different areas of work require different workshop equipment, but all have one thing in common: there is never enough storage room. Therefore Unior has developed a modular tool chest system that can be adapted to fit the requirements of the room and the user. The chests can be combined with other Unior equipment put the chest onto a carriage and you get a real mobile tool cabinet! Accessories Partitions By installing partitions (940 ES3, ) drawers can be divided freely into different sized parts. The lock is placed on the front side of the cover so that, when inserted, they key causes no obstruction when closing the drawers. The key is flexible and thus does not get in the way even when it is in the lock. The cover, strengthened on the sides, is part of the. When closed it locks all drawers with a specially designed lever. Tool trays Plastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage. *SOS = Safety Order Survey 250 and 400 mm ball-bearing slides are of higher quality compared to standard models and enable higher load capacity, while the drawer still runs smoothly and almost inaudibly. The drawers can be taken out easily with a simple push of the plastic safety buttons. Compatible drawer chests will transform a tool carriage into a real tool cabinet. The chest can be moved with the help of oval handles, positioned at the sides. They are ergonomically designed and are installed inside the chest frame, causing no obstructions to objects or persons in the surroundings. Plastic protectors on the chest cover edges protect the worker from incidental injuries and at the same time give the chest an attractive, rounded look. Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. The carriage is lacquer coated to enable a firm grip and resist rusting. It is ecologically lacquered with cadmium and lead free for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) give the carriage an attractive and distinguishable look. The large, 5-compartment chest, comes with the possibility of adding 100 mm diameter wheels (model 938/5M). This model is also equipped with a useful handle for easier manoeuvring of the chest

12 TOOL CHESTS TOOL CHESTS 938/3E Tool chest 3 compartments 939/3E Tool chest 3 compartments 938/5M Mobile tool chest with handle 938/5V Tool chest 5 compartmets cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 3 drawers (2 dim. 595 x 285 x 75 mm, 1 dim. 595 x 285 x 150 mm) cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 3 drawers (dim. 595 x 285 x 75 mm) cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 5 drawers (4 dim. 595 x 285 x 75 mm, 1 dim. 595 x 285 x 150 mm) 4 wheels, one with brake the synthetic covering protect drawers and tools from damage 5 drawers (4 dim. 585 x 405 x 75, 1 dim. 585 x 405 x 155 mm) /5E Tool chest 5 compartments 939/5E Tool chest 5 compartments 938/3V Tool chest 3 compartments cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 5 drawers (4 dim. 595 x 285 x 75 mm, 1 dim. 595 x 285 x 150 mm) cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 5 drawers (dim. 595 x 285 x 75 mm) cover with lock, when the cover is closed the drawers will be locked the synthetic covering protect drawers and tools from damage 3 drawers (2 dim. 585 x 405 x 75, 1 dim. 585 x 405 x 155 mm)

13 WORKBENCHES Workbenches Robust and functional Unior workbenches are the heart of a modern workshop. The 1500 x 750 mm work top is made of a heavy duty composite panel, protected with a special coating, and can endure almost anything. The drawers underneath offer enough room for tools that need to be always close at hand. The bench can be upgraded with panels, cabinets and other accessories from the broad range of Unior workshop equipment, making the bench even more useful. Accessories WORKBENCHES Work bench cabinet 946 C, with roller shutter ( 946 CR, ) 946 AC and 946 ACR models have a cabinet in its basic version, model 946 CR has an additional roller shutter with a. The inside of the cabinet features a perforated wall with 30 hooks for storing tools and other equipment. The 1500 x 750 mm work plate is made entirely of a heavy-duty composite panel, giving the already robustly built system additional strength and durability. The surface is protected by a special environmentally friendly coating. Doors 946 D, The storing shelves of the work bench can be closed down by installing a door with a lock. High quality and functionally designed drawers measure 585 x 610 mm and come in two heights - 75 mm or 155 mm. A sound construction design enables a load capacity up to 42 kg. Partitions By installing partitions drawers can be divided freely into different sized parts. 30 kg The lock is positioned on the front side of the bench, just under the work plate, which protects the inserted key and the lock from accidental damage. The right work bench side features space for storing larger objects. The space is divided by a removable shelf that can be positioned how the user wishes. 600 mm ball-bearing slides are of higher quality compared to standard models and enable higher load capacity, while the drawer still runs smoothly and almost inaudibly. The slide design enables the drawers to be taken out easily with a simple push of the plastic safety buttons. Synthetic covering offers damage protection for the drawer, as it prevents tools from sliding during opening and closing of the drawer. Lacquer coated to resist rusting. The carriage is ecologically lacquered with cadmium and for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) give the carriage an attractive and distinguishable look

14 MODULAR WORKBENCHES Modular workbenches MODULAR WORK BENCHES Workplace according to your wishes Modules Modular workbenches are based on a system of basic building parts, which can be freely combined to design a workbench that fits your needs. The addition of modules is quick, easy and safe. A template is included to allow the precise drilling of holes. The benches are robust for heavy-duty use. Construction parts are made of up to 3 mm thick high-quality sheet steel. The surface of the work bench s supporting structure is protected by powder paint, protecting the surface from both mechanical and atmospheric damage, as well as influences from the chemical environment. The bench top is made of a durable composite panel allowing for heavy-duty work on its surface. It is protected with an environmentally-friendly coating. Working plate is made entirely from a heavy duty composite panel and can be 1600 or 2050 mm long. Its surface is protected by an environmentally friendly coating. 942 A A1 942 A2 Large tool chests come with 7 or 8 drawers, available in two different heights. The module is 665 mm wide. Small tool chests come with 7 or 8 drawers. The module is 495 mm wide. 30 kg 942 A3 942 A13 Tool chest with a door has two low drawers and a large storage. space, suitable for bigger tools. It is fairly narrow, so it does not take up much space. 944 A1 944 A10 The 390 mm high cabinet can be added under the bench work top. It is suitable for storing larger work pieces and tools. The drawers come in two sizes (585 x 615 and 415 x 615 mm) and are 75 mm or 155 mm high. Strong construction design enables a load capacity up to 42 kg. The lock is built into the front side of the drawer chest. When the chest is used separately the lock does not obstruct the running of the drawers and in the final composition it is safely hidden within the outside frame and thus protected from damage. Lacquer coated to resist rusting. The carriage is ecologically lacquered with cadmium and for additional protection. The basic blue colour (RAL 5015), combined with grey (RAL 7036) give the carriage an aesthetic and distinguishable look. Ball-bearing slides are of higher quality compared to standard models and enable higher load capacity, while the drawer still runs smoothly and almost inaudibly. The slide design enables the drawers to be taken out easily with a simple push of plastic safety buttons. 944 A A A A A A35 Adding a 4 drawer chest will not reduce the work surface because it can be placed under the bench work top. Leg support can be added to the bench when modules underneath are not needed. The support can endure heavy static and dynamic loads, making the bench robust and durable. Connectors give the support its rigidity and strength. They are made of high quality sheet steel and are additionally mechanically protected by powder paint

15 WORKBENCHES MODULAR WORK BENCHES 946 A Workbench 946 ACR Workbench with cabinet with roller shutter 943 P1 Tool chest big 7 drawers 943 P3 Tool chest small 7 drawers the syntetic covering protect drawers and tools from damage lead free colour wooden worktop 5 drawers (3 dim. 595 x 615 x 75, 2 dim. 595 x 615 x 155 mm static load capacity: 2300 kg load capacity of small drawer: 30 kg load capacity of bigger drawer: 42 kg combination of work bench ( 946 A) and cabinet with roller shutter for work bench (946 CR) the syntetic covering protect drawers and tools from damage 7 drawers (5 dim. 585 x 615 x 75 mm, 2 dim. 585 x 615 x 155 mm) capacity of small drawers: 30 kg capacity of large drawers: 42 kg possible use of SOS tool tray system in drawers the syntetic covering protect drawers and tools from damage 7 drawers (5 dim. 415 x 615 x 75 mm, 2 dim. 415 x 615 x 155 mm) capacity of small drawers: 30 kg capacity of large drawers: 42 kg possible use of SOS tool tray system in drawers AC Workbench with cabinet 946 D Door for workbench art P2 Tool chest big 8 drawers 943 P4 Tool chest small 8 drawers combination of work bench ( 946 A) and cabinet for workbench (946 C) material: sheet metal the syntetic covering protect drawers and tools from damage 8 drawers (7 dim. 585 x 615 x 75 mm, 1 dim. 585 x 615 x 155 mm) capacity of small drawers: 30 kg capacity of large drawers: 42 kg possible use of SOS tool tray system in drawers the syntetic covering protect drawers and tools from damage 8 drawers (7 dim. 415 x 615 x 75 mm, 1 dim. 415 x 615 x 155 mm) capacity of small drawers: 30 kg capacity of large drawers: 42 kg possible use of SOS tool tray system in drawers Code A B C

16 MODULAR WORKBENCHES MODULAR WORK BENCHES 943 P5 Tool chest 2 drawers and door 943 P7 Cabinet for modular workbench 943 P9 Short wooden working plate for modular workbench plywood beech wood protected with environmentally friendly coating the syntetic covering protect drawers and tools from damage 2 drawers (dim. 415 x 615 x 75 mm) with door capacity of small drawers: 30 kg possible use of SOS tool tray system in drawers with door 943 P10 Long wooden working plate for modular workbench P6 Tool chest 4 drawers P8 Support for modular workbench plywood beech wood protected with environmentally friendly coating P11 Long connector for modular workbench ecological lacquered with cadmium and the syntetic covering protect drawers and tools from damage 4 drawers (dim. 415 x 615 x 75 mm) capacity of small drawers: 30 kg possible use of SOS tool tray system in drawers lead free colour 943 P12 Short connector for modular workbench

17 TOOL CABINETS TOOL CABINETS Tool cabinets Overview with a capital O Different models of tool cabinets made from high quality materials and featuring an attractive design will bring order into every workshop. A characteristic feature of all models is a well thought out design, enabling a good overview and maximal use of space. The interior of the cabinet is fitted with perforated steel plate, where tools can be stored according to your needs by using different multipurpose hooks and lugs already enclosed. Piano hinges enable a 180 degrees door opening so that tools on the inside of the doors will always be easily accessible. Users who want to extend the benefits of good overview to paper documentation, can use a specially designed cabinet for documents. Its many drawers will enable order and safety also in this area. The lock enables safe locking. Model E1 enables locking of both the cabinet and the drawer. The keys are flexible and therefore do not cause obstructions, even when in the lock. Lacquer coated to resist rusting. The carriage is ecologically lacquered with cadmium and for additional protection. The basic red colour, combined with black drawers give the carriage a lively and distinguishable look. Some cabinet models (E1S, E2S, E3S), besides multipurpose hooks, also feature a metal stand for wrenches, chisels and centre punches. Accessories Accessories 948 E1.1 (612908), 948 E2.1 (612909) and 948 E3.1 (612910) Unior tool cabinets can be fitted with different sets of accessories, which include hooks in 3 sizes (35, 50 and 100 mm), metal stands for wrenches, chisels and centre punches. Partitions for cabinet for documents Specially designed partitions for document cabinet drawers divide the space into four equally sized parts, suitable to store A4 documents. The overview of the documents is thus additionally enhanced. 250 mm ball-bearing slides are of higher quality compared to standard models and enable higher load capacity, while the drawer still runs smoothly and almost inaudibly. The slide design enables the drawers to be taken out easily with a simple push of the plastic safety buttons. The inner side of the door is fitted with a perforated steel plate. With enclosed multi-purpose hooks and lugs it can be used for hanging different objects. The doors are installed on piano hinges and with its wide 180 degree angle offer the user great overview and accessibility. 25 kg Cabinet edges are protected with special plastic protectors which protect the worker from incidental injuries and at the same time give the chest an attractive, rounded look. A high quality, functionally designed drawer measuring 575 x 285 x 75 mm in the E1 model enables a load capacity of 25 kg

18 TOOL CABINETS TOOL CABINETS 946 C Cabinet for workbench 947 Cabinet for documents 948 E1S Tool cabinet with accessories 948 E2 Tool cabinet with 30 hooks wooden worktop 23 drawers (dim. 920 x 363 x 42 mm) 1 drawer (dim. 575 x 285 x 75 mm the interior of the cabinet is fitted with perforated steel plate accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim. 50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches (3 pcs) and chisels (1 pc) the interior of the cabinet is fitted with perforated steel plate CR Cabinet with roller shutter for workbench 948 E1 Tool cabinet 948 E1.1 Accessories for 948 E1 948 E2S Tool cabinet ecological lacquered with cadmium and with 30 hooks model CR with roller shutter and with 1 drawer (dim. 575 x 285 x 75 mm) the interior of the cabinet is fitted with perforated steel plate accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim. 50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches (3 pcs) and chisels (1 pc) ecological lacquered with cadmium and the interior of the cabinet is fitted with perforated steel plate accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim. 50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches (3 pcs) and chisels (1 pc) Code

19 TOOL CABINETS TOOL CABINETS 948 E2.1 Accessories for 948 E2 948 E3S Tool cabinet 949/3 Tool cabinet 949.3/3 Aditional shelf for 949.1/3 accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim. 50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches (3 pcs) and chisels (1 pc) the interior of the cabinet is fitted with perforated steel plate accessories: hooks (20 pcs dim. 35 mm, 5 pcs dim. 50 mm, and 10 pcs dim. 100 mm), with metal stands for wrenches (1 pc) and chisels (1 pc) Code E3 Tool cabinet 948 E3.1 Accessories for 948 E /3 Tool cabinet 949.2/3 Tool cabinet the interior of the cabinet is fitted with perforated steel plate accessories: hooks (20 pcs dim. 35 mm, 5 pcs dim. 50 mm, and 10 pcs dim. 100 mm), with metal stands for wrenches (1 pc) and chisels (1 pc) ecological lacquered with cadmium and with shelves is part of 949/3 with drawers is part of 949/3 Code

20 TOOL BOXES TOOL BOXES Tool boxes 911 N Tool tray for sockets for tool box V Tray for tool box 912 In the field, always at hand Strong construction design and top quality composition from sheet steel enables Unior tool boxes to resist the heaviest mechanical pressures and the harshest conditions in the field. Ergonomic design and well thought out details prevent injuries of the user and enable easy use. Unior has developed a whole range of different models, suitable for specific types of work in the field. The tool boxes are made from high quality sheet steel and additionally strengthened with 1.25 mm thick connectors. material polystyrene Code B L H Lacquer coated to enable a firm grip and resist rusting. Ecologically lacquered with cadmium and for double protection N Tray for sockets for tool box 912 material polystyrene Code B L H Extra strong products of high quality are possible through the use of top-quality sheet steel, that is thicker than in similar products /1 Tool box 1 compartment Unior tool boxes come with one or two handles. Both versions have their advantages, both enable a comfortable grip and are made of high quality sheet steel with a circular cross section. Compartments are made of one piece sheet steel, aesthetically and functionally designed and reinforced at the top by a specially designed edge. Their inside is totally smooth with no edges that could injure the user. material polystyrene Code B L H V Tray for tool box 911 Accessories Plastic tool trays A broad range of plastic tool trays enables orderly and clear storage of your hand tools. material polystyrene short type with one handle Code B L H

21 TOOL BOXES TOOL BOXES 911/3 Tool box 3 compartments 912/1 Tool box 1 compartment 912/5 Tool box 5 compartments 914/5 Tool box 5 compartments short type with one handle long type with one handle long type with one handle short type with two handles /5 Tool box 5 compartments 912/3 Tool box 3 compartments 914/3 Tool box 3 compartments 915/3 Tool box 3 compartments short type with one handle long type with one handle short type with two handles long type with two handles

22 TOOL BOXES TOOL BOXES 915/5 Tool box 5 compartments 918 Support 960/1 Tool box 960/6 Installers tool box long type with two handles for transporting and lifting of tool boxes 916 and 912/5 max lift 700 mm intended for transport and storage of tools, power tools and equipment, documentation in various climatic conditions with syntetic belt S Tool box with support K Metal box 960/2 Tool box intended for transport and storage of tools, power tools and equipment, documentation in various climatic conditions /3 Tool box intended for transport and storage of tools, power tools and equipment, documentation in various climatic conditions /4 Tool box Code no. A B C ¼" " ½" " " E M intended for transport and storage of tools, power tools and equipment, documentation in various climatic conditions

23 WARDROBE CABINETS WARDROBE CABINETS Wardrobe cabinets Tidiness begins with personal items Unior wardrobe cabinets are made of high quality materials and are functionally designed and therefore very popular, even outside the workshop. Wide range of colours have brought life into many fitness centres, schools and gyms. Its solid, anti-theft construction can be further enhanced by installing a special lock. By adding a broad range of accessories, the inside of the wardrobe can be freely designed according to your wishes. Accessories Waved plastic insert The waved plastic insert is specially designed to collect water from wet shoes, leading the water into channels with the shoes remaining in a dry position. Cell phone pocket Pole hanger The pole hanger can be installed into the upper part of the wardrobe. The wardrobes are powder painted to resist rusting. For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere. RAL 1021 RAL 3020 RAL 5010 RAL 6029 RAL 2004 RAL 7035 Doors have ventilation holes, specially designed to protect the opening from rain. The body of the wardrobe is made of 0.8 mm thick high quality sheet steel, the doors are even stronger made from 1 mm thick sheet steel. The keys are flexible, therefore the key does not cause obstructions even when inserted in the lock. The safety of the wardrobe can be additionally strengthened with a combination lock, protected by both a key and a code. The doors are made of 1 mm thick sheet steel, reinforced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035). Hangers inside the wardrobe are intended for hanging clothes. They are made of thicker sheet steel, matching the colour of the wardrobe itself. The front side of the door features a frame for inserting identification cards. 20 kg The load capacity of the shelf is 20 kg. It can be additionally partitioned if desired. Piano hinges range along the entire door length and enable a 180 degree opening. At collision they move into either direction

24 WARDROBE CABINETS 950/3 3 compartments 950/6Z 3 compartments A H B sheet metal ,8 mm A H B sheet metal ,8 mm A1 H1 B1 sheet metal mm A1 H1 B1 sheet metal mm 950/6 6 compartments 950/2 2 compartments A H B sheet metal ,8 mm A1 H1 B1 sheet metal mm 950/9 9 compartments A H B sheet metal ,8 mm A1 H1 B1 sheet metal mm 950/3V 3 compartmens A H B sheet metal ,8 mm A1 H1 B1 sheet metal mm A H B sheet metal ,8 mm A1 H1 B1 sheet metal mm 44

25 TOOL TRAY SETS TOOL TRAY SETS FULL TOOL TRAYS Art. EuroSTYLE EuroMASTER EuroPLUS HERCULES Tool chest Workbench Modular workbench Tool boxes 911 N 100 x 445 x V 100 x 445 x N 100 x 545 x V 100 x 545 x 43 / / / / / / / art. 911 / / / / / / / art. 911 / / / / / / / art. 912 / / / / / / / art /1 964/1 SOS 965/1A 964/1A SOS 965/2 964/2 SOS 965/2A 964/2A SOS 965/2B 964/2B SOS 965/2C 360 x 374 x 40 1x + small 1x + small 1x + small Front: 1x+m 3V, 5V- 1x+m 1x + 2x small x 193 1x + 2x small x 193 P1,P2 1x + small P3-P7 / 965/3 964/3 SOS 965/4 964/4 SOS 965/5 964/5 SOS 965/6 964/6 SOS 45