Sentry RP- IP Camera. Quick Start Installer Guide

Size: px

Start display at page:

Download "Sentry RP- IP Camera. Quick Start Installer Guide"

Cathleen Walker
7 years ago
Views:

1 Sentry RP- IP Camera Quick Start Installer Guide

3 Sentry RP IP Camera Models 1.3 Megapixel IP Camera Outdoor Camera 3.6mm Fixed Lens PoE Power Option with 12V DC Compatible with Sentry RP Series Systems RP-IP5330IR-1.3MP Network Connection (PoE) DC 12V Power

4 Sentry RP IP Camera Models RP-IP831-VP-1.3MP 1.3 Megapixel IP Camera Indoor Camera Vandalproof 3.6mm Fixed Lens PoE Power Option with 12V DC Compatible with Sentry RP Series Systems Network Connection (PoE) DC 12V Power

5 Sentry RP IP Camera Models RP-IP5304IR-2MP 2.0 Megapixel IP Camera Indoor/Outdoor Camera 5-15mm Vari-Focal Lens 4 High Power IR LEDs (150 /50m Range) H.264, MJPEG and MPEG4 Compatible with Sentry RP Series Systems Inputs Alarm In Alarm Out (A/B) RS485+ / RS485- Network Connection DC 12V Power Audio Out (White) Audio In (Yellow) How to Adjust the Camera Lens 1. Push the top cover backwards. 2. Remove the front cover by turning it counter-clockwise. 3. Loosen the 2 focusing screws (do not remove them), adjust the lens to the required length then tighten them when finished. 4. Turn the cover clockwise to re-attach it and push the top cover forwards.

6 Sentry RP IP Camera Models RP-IP831IR-VP-VF-2MP 2.0 Megapixel IP Camera Indoor/Outdoor Camera PoE Capable 21 IR LEDs H.264, MJPEG and MPEG4 Compatible with Sentry RP Series Systems Network Connection DC 12V Power

7 Setting up an RP-IP Camera to connect to an RP Series System 1. From the main window, click on the Menu button, and click on Add/Del IP Camera from the pop up menu. 2. On the IP Camera Device List page, click on the Add DG IPC button. Select DG Series IPC for: RP-IP5304IR-2MP RP-IP831IR-VP-VF-2MP Select DH Series IPC for: RP-IP5330IR-1.3MP RP-IP831-VP-1.3MP All RP-IP Cameras found on the network will automatically appear in this window. If none appear, click Update IP List to scan for connected cameras. 4. Write down the IP address of the camera you want to configure as it appears on the screen, then click Exit. 3. Minimize the software by clicking and open Internet Explorer. Type in the IP Address of the IP camera into the URL field. Please call Sentry Security Systems Inc. at for Technical Support

8 Once the Internet Explorer page has loaded, you might have to login to access the camera. The default log-in is username: admin, pw: admin. Click Submit. You will now see the internal settings of the IP Camera. 4. On the left hand side of the menu in the IP Camera Setup, select Network Set and then LAN to set the required IP address and default gateway. 5. Click Save to save the settings. *If you wish to set-up more IP cameras, repeat steps 1 through 5.* Once the RP-IP camera network configuration is complete you can return to the system software to change the IP Address and basic settings, rather than accessing it through Internet Explorer. 1. Click the Menu button on the Software, then from the pop-up menu click on Add/Del IP Camera. 2. Double click on the camera you would like to modify - listed under Server Name. A window will now pop up, allowing you to modify the IP Camera. Please call Sentry Security Systems Inc. at for Technical Support

9 Configuring an RP-IP Camera s Video Settings Configuring an RP-IP Camera s video settings allows its various settings such as camera resolution, video compression and audio options to be modified. 1. Access the Video Settings by entering the IP Address of your camera into the URL field in Internet Explorer. Default login is user: admin, pw: admin then click Submit. 2. In the menu on the left, click on Video Settings, then Video Coding. This will now give you access to the video settings of your IP camera. Remember to click Save at the bottom of the window to save any changes you may have made. Please call Sentry Security Systems Inc. at for Technical Support

10 Configuring an RP-IP Camera s Motion Detection Settings To configure an RP-IP camera to detect motion: 1. Log into the camera settings by entering the IP Address of your camera into the URL field in Internet Explorer. 2. Click on Alarm Settings, then Motion Detection in the left hand navigation bar. 3. Check the box next to Motion under Detection Setting, then select the sensitivity level from the drop down menu (5 being the highest). 4. Check the box underneath Time 1 and then enter 0:0-23:59 (by default) 5. Click Area Set under Detection Area, followed by the All button to set motion detection for the entire camera view, or click and drag a square in the image box to set the desired area. 6. Remember to click Save at the bottom of the page to save any changes you may have made. Please call Sentry Security Systems Inc. at for Technical Support

Full HD WDR Mini Bullet IP Camera

Full HD WDR Mini Bullet IP Camera User s Manual DN-16083-1 Ver. 1.0 Table of Contents 1. Overview... 2 1.1 Features... 2 1.2 Package Contents... 3 1.3 Dimensions... 4 1.4 Function Cables... 5 1.6 microsd