Atlas Copco Surface Drill rig

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Atlas Copco Surface Drill rig"

Transcription

1 Atlas Copco Surface Drill rig ROC D for m m 89 m m hole range ROC D7 for 6 m m m m hole range Full radio remote controlled drill rigs exceptionally maneuverable in the roughest terrain.

2

3 Radio Remote Control enhances operator safety and increases production Atlas Copco full radio remote controlled D series non-cab drill rigs are exceptionally stabile making them versatile and productive in all types of terrain. The boom anchor point is located on the middle of the rig frame to keep the center of gravity low and yet provide good ground clearance. Designed to meet the toughest conditions Atlas Copco ROC D and ROC D7 are equipped with a Caterpillar diesel engine, high capacity Atlas Copco compressor and a powerful COP rock drill. By placing the boom anchor point low and to the center of the rig frame, reach and coverage area are excellent. Atlas Copco hole quality Atlas Copco has used the latest technical innovations to build rugged, versatile drill rigs that combined low operating costs with high productivity. Every component in the rig has been designed to provide optimum hole quality. The highly efficient diesel engine, boom anchor point, double drillsteel guide and cylinder feed all contribute to higher penetration rates, straighter and better quality holes and greater productivity. Tramming and drilling by radio Atlas Copco ROC D and ROC D7 are full radio controlled for both tram ming and drilling. In difficult conditions the operator keeps a safe distance from the rig while tram ming it into position using the radio remote control. Proportional controls in the operator s radio unit provide smooth, precise movements of the boom and other rig functions during set up and drilling. Versatile boom system Atlas Copco s unique heavy duty tubular folding boom provides excellent reach and coverage. More holes can be drilled from each set-up. Less moving means higher productivity, especially in rough difficult terrain. The coverage area can vary between and m with boom swing angels from +0 to - 0 or +0 to - 0, depending on the boom system chosen. The versatile boom head permits positioning of the feed for horizontally drilling high up on the walls (7.6 m) or toe-holes. This is also useful when servicing the rock drill or hoses. By placing the boom anchor point low and to the center of the rig frame, stability, reach and coverage area have all been improved while maintaining high ground clearance. More horse power ROC D and ROC D7 are equipped with Caterpillar diesel engines that have extra power reserves. The philosophy behind the extra horse power is, that an engine working below full rating has an improved life, suffers less break downs, requires less fuel and produces less noise and exhaust emissions. The extra horse power can also be used for high altitude drilling. ROC D/D7 is equipped with CAT-engines

4 m m ROC D 89 m m ROC D for general contractors drilling The Atlas Copco ROC D is an all-round rig designed for drilling holes in the -89 mm diameter range. The balanced design of this unit combines a low center of gravity with high ground clearance. That, together with a number of technical innovations such as radio remote control and hydrauli support leg makes the ROC D an exceptional rough terrain machine. Superior in rough terrain The ROC D boom anchor point is located in the center of the fame to give a low center of gravity and high ground clearance. The power pack is mounted at the rear of the machine to provide balance and stability. The result is a rig with exceptional rough terrain capabilities. The advanced radio remote control, hydraulic stabilizer, centrally located winch (optional) and powerful Caterpillar diesel engine make it easy to move over the difficult terrain often encountered by drilling contractors. Installed productivity Placement of the boom anchor point, front and center on the rig frame extends the reach and increase the stability of the machine. The strong but relatively light tubular folding boom has high resistance to twisting. This provides a large coverage area allowing several holes to be drilled from the same set-up. The ROC D is fitted with a water cooled, turbo-charged Caterpillar diesel engine with an effective out put of kw (78 hp) at 00 rpm. The Atlas Copco C06 screw compressor delivers 8 l/s (80 cfm) of air. The ROC D comes equipped with a COP8, (hole range 8-89 mm, 8 - ), hydraulic rock drill or can be fitted with a COP 88LE (optional equipment) for drilling holes in the -76 m m ( - ) diameter range. The ridged aluminum profile cylinder feed is from to times stronger than steel and fitted with an Atlas Copco double drill steel support delivers unmatched hole quality. Longer reach and coverage area. Tonnes x Hole range 6 / / 0 / The diagram shows productivity. The lower curve is equivalent to hard rock and the upper to soft rock.

5 ROC D7 m m 6 m m ROC D7 for bench drilling The Atlas Copco ROC D7 has been designed to meet the demanding requirements of production drilling holes in the 6-mm range. The balanced design of this unit with its powerful diesel engine, large compressor and high performance rock drill provides maximum productivity at the best possible over-all cost. Tramming, set-up and drilling are done safely and quickly with the precision radio remote control. The versatile boom system and large coverage area provide more holes from each set-up. Dependable productivity The ROC D7 is equipped with a water cooled, turbo-charged Caterpillar diesel engine. The effective out put of this engine is 9 kw (0 hp) at 00 rpm. The engine operates below capacity reducing fuel consumption and engine wear. The power-pack is located at the rear of the rig. The large Atlas Copco C06 screw compressor delivers 7 l/s (70 cfm) of air for efficient hole flushing in all conditions. The location of the boom anchor point, low center of gravity, extra wide hydraulic stabilizer, centrally mounted winch (optional) and advanced radio remote control make tram ming over rough terrain, safe and easy. Toe-hole drilling. Production and economy The ROC D7 is equipped with the powerful COP88 HE rock drill. The long piston of this drill, reduces power losses and increase the impact on the rock. The ridged aluminum profile, cylinder feed is from to times stronger than steel and fitted with an Atlas Copco double drill steel support delivers unmatched hole quality. The COP 800-series of rock drills are mounted on ROC D7. Tonnes x Hole range 6 / / 0 / The diagram shows productivity. The lower curve is equivalent to hard rock and the upper to soft rock.

6 Built for productivity The guiding star in the development of this equipment has been to make both large and small improvements to enhance the effectiveness of the operator and increase over-all production. These improvements can be as small as providing a sensible storage space for hand tools and manuals or separate hose to the rock drill that reduce wear and make replacement simple. This thinking extends to even larger systems such as the radio remote control or the large service doors, tagged electrical cables and hydraulic hoses and location of fittings that make service access easy. Other practical well tough through details are; an extra rechargeable battery in the lid of the radio unit along with a waterproof space for papers; easy access drain oil plugs; built in engine heater and dust binding system (optional) These rigs have also been designed to use environmentally friendly hydraulic and lubricating oils. ROC D and ROC D7 are the result of combining well designed component and systems, to produce a machine that will enhance your safety, reduce your work load and increase your rewards. Atlas Copco ROC D and ROC D7 are full radio remote controlled blast hole drills. The engine compartment is easily accessed from three sides and also from the front. The dust collector has an easy accessible inspection port for servicing and changing filters. All components are easily reached from separate inspection ports. Pre-equipped for dust free drilling DSA (optional). The boom anchor point is placed low and near in the center of the frame to provide good balance and optimum reach. The hydraulic winch (optional) is placed in the middle of the rig and used to secure the drill in difficult terrain. The robust hydraulic stabilizer supports the rig when climbing in rough terrain. The tracks are positioned on the forward portion of the rig frame to provide the best balance. The width meets international transport rules. 6

7 Atlas Copco ROC D and ROC D7 are full radio controlled for both tramming and drilling. An extra rechargeble battery for the radio remote control. Toe-hole drilling. The winch secures the rig and operator in difficult terrain. A double drill-steel support on the feed gives perfect guidance for accurate collaring and maximum hole quality. Excellent storage space Easy service access. The automatic drill stop is used when loosening drill rod connections. It opens automatically the drill steel support, breaks the threads and makes the loosening time to a minimum. Less wear and easy to change the separated hydraulic hoses system. Rapid identification and fault finding thanks to tags marking hoses and electrical cables 7

8 Tekniska data ROC D7/ROC D Coverage area Recommended hole range for ROC D T8, T, Rmm -89 mm 8 Hole depth 8 m approx. 9 Recommended hole range for ROC D7 T8, T 6- m m Hole depth 8 m approx. 9 T m 69 Engine ROC D Caterpillar water cooled turbo-charged diesel, CAT 6B Rating at 00 rpm kw 78 HP Engine ROC D7 Caterpillar water cooled turbo-charged diesel, CAT 6B Rating at 00 rpm 9 kw 0 HP Hydraulic rock drill ROC D COP 8ME/LP, COP 88 LE Impact power, max. kw 0 HP Hydraulic pressure, max. 0 bar psi Torque, max. 700 Nm lbf/ft Weight, Approx. 0 kg Hydraulic rock drill ROC D7 COP 88 LE/HE COP 80 Impact power, max. 8 kw. HP Hydraulic pressure, max. 0 bar psi Torque, max. 980 Nm 7 lbf/ft Weight, approx. 7 kg Boom options -00, single boom -0, folding boom Air compressor ROC D Atlas Copco screw compressor C06 Working pressure, max. 8. bar psi FAD 8 l/s 80 cfm Air compressor ROC D7 Atlas Copco screw compressor C06 Working pressure, max. 0. bar psi FAD 0 l/s cfm or 7 l/s 70 cfm Fuel tank Capacity 80 l ~ 7 US gal. Feed Feed length, total 7 0 mm Travel length 0 mm Feed extension 00 mm Feed rate, max. 0.9 m/s 80 ft/min Feed force, max. 0 kn 00 lbf Tramming Tramming speed ROC D, max.. km/h.0 mph Tramming speed ROC D7, max.. km/h.0 mph Traction force ROC D 0 kn 000 lbf Traction force ROC D7 0 kn 000 lbf Hill climbing ability 0 (0 with winch) Track oscillation ± Ground clearance m m 7 Transport dimensions Total weight excluding optional equipment ROC D 700 kg.700 lb ROC D7 000 kg 9.00 lb Width 70 mm 7 0 Length 0 70 mm Height 00 mm Vertical reach -00 Single boom -0 Folding boom Horizontal coverage area Forward drilling Forward drilling with inclination Standard equipment RHS mechanized rod handling for 8 m, m (T) (9 ) of rods Radio remote control Double drill-steel support Toe-hole drilling kit (standard with RHS system) Auto drill stop with thread loosener Fuel saving device Two-speed traction motors Pre-separator Dust collector Feed extension Air-flow control switch Anti-jamming system Collaring valves for reduction of percussion and air pressures. Retractable dust hood Heavy duty tracks Hydraulic support leg Work lights + 90 mounted feed 0 6 Vertcal feed, coverage area Optional equipment -0 Folding boom -0 Folding boom short -0 Folding boom long 0 Electronic hole inclination instrument Electronic hole depth instrument Pre-separator (ROC D) Thread greasing device with brushes Thread greasing device (ECG) Hydraulic winch Coupling sleeve retainer Engine pre-heater Central lubricating system Mechanical inclination instrument Water-mist system Extractor for rock drill Electric re-fuelling pump Biologically degradable hydraulic oil Total Rock Drilling Technology Illustrations in this brochure may show equipment with optional extras. Specfication and equipment subjects to change without notice. Consult your Atlas Copco sales company for specific information

Atlas Copco Surface Drill Rig. ROC F9 A powerful 25 kw tophammer combining strength, productivity and hole quality. Hole range 89 127 mm (3½ 5 )

Atlas Copco Surface Drill Rig. ROC F9 A powerful 25 kw tophammer combining strength, productivity and hole quality. Hole range 89 127 mm (3½ 5 ) Atlas Copco Surface Drill Rig ROC F9 A powerful kw tophammer combining strength, productivity and hole quality. Hole range 89 7 mm (½ ) Flexibility and mobility are two important factors for a smooth operation.

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

CHRISTENSEN 140. Surface core drilling rig for medium to large depths

CHRISTENSEN 140. Surface core drilling rig for medium to large depths CHRISTENSEN 140 Surface core drilling rig for medium to large depths GAME CHANGER THE NEW CHRISTENSEN 140 EXPLORATION DRILL RIG FROM ATLAS COPCO CAN BE THE GAME CHANGER YOU NEED. EQUIPPED WITH THIS NEW

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

304.5. Mini Hydraulic Excavator

304.5. Mini Hydraulic Excavator 304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

Atlas Copco Surface drill rigs. SmartRig ROC D65. Revolutionize your mining operation with us. Hole Diameter: mm (4 5 /16 8 )

Atlas Copco Surface drill rigs. SmartRig ROC D65. Revolutionize your mining operation with us. Hole Diameter: mm (4 5 /16 8 ) Atlas Copco Surface drill rigs SmartRig ROC D65 Revolutionize your mining operation with us Hole Diameter: 110 203 mm (4 5 /16 8 ) The mining mastermind. Brilliant and built to last. Surface mining equipment

More information

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3 PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing

More information

E08 E10. Compact Excavators

E08 E10. Compact Excavators E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition

More information

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling

More information

Post Pounders & Post Hole Augers

Post Pounders & Post Hole Augers Post Pounders & Post Hole Augers High & Heavy Hitters Side Mast Our most popular model for all heavy and light duty post placement Ability to move sideways a total of 16 Four hammer head mounting positions

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information

1300 MAXTRAK SPECIFICATION

1300 MAXTRAK SPECIFICATION CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having

More information

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights 307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800

More information

ATLAS COPCO BLASTHOLE DRILLS PIT VIPER 311. Rotary drilling Hole diameter 9 in 12 1 4 in (229 311 mm) Maximum hole depth 135 ft (41 m)

ATLAS COPCO BLASTHOLE DRILLS PIT VIPER 311. Rotary drilling Hole diameter 9 in 12 1 4 in (229 311 mm) Maximum hole depth 135 ft (41 m) ATLAS COPCO BLASTHOLE DRILLS PIT VIPER 311 Rotary drilling Hole diameter 9 in 12 1 4 in (229 311 mm) Maximum hole depth 135 ft (41 m) BUILT FOR PERFORMANCE Designed for comfort With a 110,000 lb (50 tonnes)

More information

303.5C CR Mini Hydraulic Excavator

303.5C CR Mini Hydraulic Excavator 303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab

More information

Atlas Copco Oil and Gas Rigs. RD20 XC Drill Rig

Atlas Copco Oil and Gas Rigs. RD20 XC Drill Rig Atlas Copco Oil and Gas Rigs RD20 XC Drill Rig RD20 XC xtra Capabilities The RD20 XC is based on the Atlas Copco RD20, the most successful shallow oil and gas rig in the 120,000 lb (53 metric tonnes) class.

More information

HCR. European series

HCR. European series HCR European series 1 INSIDE FURUKAWA Japan, a country of old traditions, has proven its highly technical performances in many different ways. Already, many years ago, Japanese electronic equipment contributed

More information

Atlas Copco Professional Piston Compressors. KT Series (5-20hp)

Atlas Copco Professional Piston Compressors. KT Series (5-20hp) Atlas Copco Professional Piston Compressors KT Series (5-20hp) New KT Series: solid performance and exceptional reliability Atlas Copco delivers quality compressed air for superior operational reliability.

More information

308E CR SB. Mini Hydraulic Excavator with Swing Boom

308E CR SB. Mini Hydraulic Excavator with Swing Boom 308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum

More information

Drilling & Piling Attachments. of Sweden

Drilling & Piling Attachments. of Sweden Drilling & Piling Attachments of Sweden General Catalogue 2012 Made in Sweden Blast Hole Drilling MD33 MD45 DM60 Foundation Drilling SPD AB It s with pride and joy I present our company SPD AB. DM85 DM-X

More information

Built to last, designed to perform

Built to last, designed to perform Built to last, designed to perform Scalping and precision screening Easy service and maintenance access Screen box 4200 x 1500 mm Electric version available Fuel Saving by load sense hydraulic system Advanced

More information

HR46 HARVESTER. Thinning Specialist

HR46 HARVESTER. Thinning Specialist HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

VOLVO WHEEL LOADERS BLOCK HANDLING

VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially

More information

Atlas Copco Compressors Contractors Guide

Atlas Copco Compressors Contractors Guide Atlas Copco Compressors Contractors Guide Automan Piston Compressors GXe Oil-Injected Rotary Screw Compressors Servicing Kits tial, residen al, ri i n d us t n i n g mi tr ad e, & more phone 07) 4725 8880

More information

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

SD t hp

SD t hp Volvo SINGLE drum Compactors SD115 11.8-12.3 t 148-173 hp Powerful performance. The SD115 provides the energy, reliability and strength you need, when you need it. Powerful drum performance enables you

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

AF 220 HYDRAULIC DRILL RIG

AF 220 HYDRAULIC DRILL RIG AF 220 HYDRAULIC DRILL RIG AF 220 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 220 is one of the most prestigious machines with great performance. Its success is due to its characteristics

More information

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length

More information

The new challanger H11

The new challanger H11 ROTTNE H11 The new challanger H11 Bogie lift on both axles gives excellent turning radius. Eco-friendley engine ROTTNE H11 has a powerful 6-cylinder Tier 3 ecofriendly engine that comfortably fulfils applicable

More information

HC 110. Hydraulic Crawler Crane FEATURES

HC 110. Hydraulic Crawler Crane FEATURES HC 110 Hydraulic Crawler Crane FEATURES 110 tons (100 mt) max lift capacity 230 ft. (70 m) max main boom length 200+70 ft. (61+21 m) max lift crane boom & jib length Power up/down and freefall on main

More information

Torq-Matic Automated Floor Wrench

Torq-Matic Automated Floor Wrench Torq-Matic Automated Floor Wrench TM 120 Helping Our Customers Achieve Superior Results Torq-Matic Automated Floor Wrench The Canrig Torq-Matic fully automated floor wrench sets the standard for performance

More information

304C CR Mini Hydraulic Excavator

304C CR Mini Hydraulic Excavator 304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight

More information

Technical Description LR 611 Crawler Loader

Technical Description LR 611 Crawler Loader Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924

More information

Industrial Cutting Equipment. includes new Concrete Crusher

Industrial Cutting Equipment. includes new Concrete Crusher Industrial Cutting Equipment includes new Concrete Crusher LUKAS Industrial Cutting Equipment The demand for environmentally-friendly disposal and recycling of used or discarded products within highly

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

SITE DUMPERS PRODUCT RANGE

SITE DUMPERS PRODUCT RANGE SITE DUMPERS PRODUCT RANGE MORE THAN JUST A DUMPER High performance and reliable water cooled diesel engines for smooth and economical operation Large opening service doors for best in class service access

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 2012/04/19 TECHNICAL SPECIFICATIONS Elite LOADER BOOMS Main boom: rectangular structure 6" x 8" (152 mm x 203 mm) made of high tensile steel Stick boom: rectangular structure 6" x 6" (152 mm x 152 mm)

More information

The CLIPPER Solutions

The CLIPPER Solutions The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.

More information

S590 SKID-STEER LOADER SPECIFICATIONS

S590 SKID-STEER LOADER SPECIFICATIONS Loader Dimensions S590 SKID-STEER LOADER SPECIFICATIONS Dimensions are given for loader equipped with standard tires and 68 in. Construction and Industrial bucket and may vary with other bucket types.

More information

FTheBetterMachine. Technical Description R 992. Hydraulic Excavator

FTheBetterMachine. Technical Description R 992. Hydraulic Excavator Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket

More information

RH 12.5 RH 16.5. Crawler Excavator Specifications

RH 12.5 RH 16.5. Crawler Excavator Specifications Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic

More information

AF 280 HYDRAULIC DRILL RIG

AF 280 HYDRAULIC DRILL RIG AF 280 HYDRAULIC DRILL RIG AF 280 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 280 is a drill rig that can easily overcome any kind of problem on the job site, even the most difficult ones.

More information

584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb

584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb 584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight

More information

Operating Instructions Drill rig DRU160

Operating Instructions Drill rig DRU160 Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested

More information

Atlas Copco. Oil-injected Rotary Screw Compressors GX 2-7 EP/GX 7-11 EL (2-11 kw/3-15 hp)

Atlas Copco. Oil-injected Rotary Screw Compressors GX 2-7 EP/GX 7-11 EL (2-11 kw/3-15 hp) Atlas Copco Oil-injected Rotary Screw Compressors 2-7 EP/ 7-11 EL (2-11 kw/3-15 hp) New series: screw compressors built to last Atlas Copco screw compressors have always set the standard for reliability

More information

Technical data Hydraulic lift crane LR 1250

Technical data Hydraulic lift crane LR 1250 Technical data Hydraulic lift crane Complies with ANSI/ASME B 30.5 LR 1250 Serial number 135xxx Dimensions Basic machine with undercarriage R 28 7 11 6 31 10 19 10 9 10 27 1 63 53 15 1 59 24 8 28 7 12

More information

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

Atlas Copco Stationary air compressors

Atlas Copco Stationary air compressors Atlas Copco Stationary air compressors Oil-free and oil lubricated piston compressor 2.2 - kw / 3-7.5 hp QUALITY COMPRESSORS DESIGNED SPECIFICALLY FOR THE SNOW MAKING INDUSTRY Atlas Copco's L-range of

More information

VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910

More information

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés.

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés. LM 55 UNDERGROUND coring DRill Technical Overview Copyright 2011. Tous droits réservés. LM 55 MODULAR CORE DRILL Copyright 2011. All rights reserved. The LM 55 is a compact underground diamond coring drill

More information

SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V

SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse

More information

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg 21 Series 0.3 hp 0.22 kw 0.2 15.2 ft. lbs. 0.27 20.6 Nm Non-Reversible Rear Exhaust 21M1340-40 Spindle Rotation All models are right-hand rotation. To order left-hand rotation models (not reversible) substitute

More information

Atlas Copco Exploration Products. Explorac reverse circulation rigs

Atlas Copco Exploration Products. Explorac reverse circulation rigs Atlas Copco Exploration Products Explorac reverse circulation rigs Deep hole exploration with reverse circulation In many cases, exploration drillers have to modify various types of drill rigs in order

More information

LIFTING CAPACITIES (20'0") A:

LIFTING CAPACITIES (20'0) A: EX Engine Gross Power : 1 kw (1 hp) Operating Weight Loading Shovel : kg (77 lb) Backhoe : 3 kg (77 lb) Loading Shovel Bucket PCSA Heaped : 1. m 3 (7. yd 3 ) 3. m 3 (.1 yd 3 ) Backhoe Bucket PCSA Heaped

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

For us, it s not just business. It s personal.

For us, it s not just business. It s personal. For us, it s not just business. It s personal. CLIMATE CONTROL SERIES - SIMPLEX TANK MOUNTED Quiet operation. Heavy duty single and two stage high efficiency air compressors. Durable cast iron pumps for

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile dredges catalogue ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB company profile History Dragflow S.r.l. was born at the end of the 1980 s as a manufacturer of heavy duty submersible agitator

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

HEAVY-DUTY, REDEFINED. REDEFINED.

HEAVY-DUTY, REDEFINED. REDEFINED. HEAVY-DUTY, REDEFINED. TO GET YOUR TOUGHEST JOBS DONE, you need an engine that works even harder than you do. That s why Caterpillar offers the CT13 engine for our vocational trucks. It delivers every

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

SELECTION, APPLICATION & MAINTENANCE

SELECTION, APPLICATION & MAINTENANCE DIESEL PROTECTION SYSTEMS TPZ Engine Air Intake Shut Down Valves (Combined Automatic Overspeed and Air Pressure Operated Shut Down Bendix Types) SELECTION, APPLICATION & MAINTENANCE Valve Numbers TPZ-101

More information

UNITOR VACUUM cleaners

UNITOR VACUUM cleaners UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.

More information

G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles.

G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles. G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles. G-Wagon: Combat proven. Mission adaptable. The Vehicle of Choice. More than 60,000 Mercedes-Benz G-Wagons have been sold to military customers worldwide

More information

Professional Choice. The perfect combination of SuperSteam, Hawk pump and Nicolini motor in one machine

Professional Choice. The perfect combination of SuperSteam, Hawk pump and Nicolini motor in one machine HIGH PRESSURE JETS Hawk Inox E1600C Professional Choice Made by SuperSteam! The Hawk Inox E1600C is a high pressure jet designed for the needs of the professional user. It is built solid to withstand the

More information

4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm

4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate

More information

Atlas Copco Industrial Aluminium Piston Compressors. L Series Oil-lubricated & oil-free (1.5-15 kw / 2-20 hp)

Atlas Copco Industrial Aluminium Piston Compressors. L Series Oil-lubricated & oil-free (1.5-15 kw / 2-20 hp) Atlas Copco Industrial Aluminium Piston Compressors L Series Oil-lubricated & oil-free (1.5-15 kw / 2-20 hp) Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers

More information

4000 / 4500 / 5000 / 5500 kg at 500mm L/C 8000 / 9000 / / lbs. at 24 L/C

4000 / 4500 / 5000 / 5500 kg at 500mm L/C 8000 / 9000 / / lbs. at 24 L/C C40-55s IC-PNEUMATIC LPG/DIESEL 4000 / 4500 / 5000 / 5500 kg at 500mm L/C 8000 / 9000 / 10000 / 11000 lbs. at 24 L/C Low effort hydrostatic power steering provides the operator with excellent maneuverability

More information

STOUCO Drilling Equipment

STOUCO Drilling Equipment STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift

More information

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features: ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................

More information

3516 Industrial Engine

3516 Industrial Engine CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1

More information

4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty

4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty 4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

D6R Series III Track-Type Tractor

D6R Series III Track-Type Tractor D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping

More information

data GMK7550 product guide contents features All Terrain Crane 550 USt (450 t) capacity 197 ft (60 m) 5 section full power boom

data GMK7550 product guide contents features All Terrain Crane 550 USt (450 t) capacity 197 ft (60 m) 5 section full power boom data features 550 USt (450 t) capacity 197 ft (60 m) 5 section full power boom Patented boom pinning system TWIN-LOCKTM 82 ft - 240 ft (25 m - 73 m) lattice luffing jib 39 ft - 230 ft (12 m - 70 m) fixed

More information

For us, it s not just business. It s personal.

For us, it s not just business. It s personal. For us, it s not just business. It s personal. HEAVY DUTY SERIES - VERTICAL TANK MOUNTED Quiet operation. Heavy duty two stage high efficient air compressors. All units factory set at 120-150psi. All units

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000

More information

M26 T/30 T M40 T/50 T

M26 T/30 T M40 T/50 T M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,

More information

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.1 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm Features Very short control times Low noise Mounting

More information

4000 / 4500 / 4990 / kg at 500mm L/C 8000 / 9000 / / lbs. at 24 L/C

4000 / 4500 / 4990 / kg at 500mm L/C 8000 / 9000 / / lbs. at 24 L/C C4 40 0-55 5s s IC-PNEUMATIC LPG/DIESEL 4000 / 4500 / 4990 / 5500500 kg at 500mm L/C 8000 / 9000 / 10000 / 11000 lbs. at 24 L/C Low effort hydrostatic power steering provides the operator with excellent

More information

Drilling fleet. Capabilities. Agriculture. Water. Environment.

Drilling fleet. Capabilities. Agriculture. Water. Environment. Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function

More information

Atlas Copco Oil-free Scroll Compressors. SF 1-15 1.5-15 kw/2-20 hp

Atlas Copco Oil-free Scroll Compressors. SF 1-15 1.5-15 kw/2-20 hp Atlas Copco Oil-free Scroll Compressors SF -.- kw/-0 hp Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers quality compressed air for superior operational

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS

Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Attach and go. Handle your workload with Volvo s hauler chassis designed for ultimate performance, flexibility and versatility. This machine is the

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information