This certificate attests that all provisions concerning the attestation of factory production control described in Annex ZA of the standards
|
|
|
- Clementine McCoy
- 7 years ago
- Views:
Transcription
1 Gutenbergstr Greven Certificate 0799-CPD-20.1 Combigrid 30/30 Q1 201 GRK 3, 30/30 Q6 R 156, 30/30 Q6 R 206, 30/30 Q1 251 GRK 4, 40/40 Q1 151 GRK 3, 40/40 Q1 201 GRK 3, 40/40 Q6 R 156, 40/40 Q6 151 GRK 3, 40/40 Q6 R 206, 40/40 Q6 251 GRK 4, 60/60 Q1 151 GRK 3, 60/60 Q1 251 GRK 4, 60/60 Q6 R 156, 60/60 Q6 R 206, 60/60 Q6 251 GRK 4, 80/80 Q1 251 GRK 4, 80/80 Q1 251 GRK 4 Deich, 80/80 Q6 251 GRK 4, 120/40 R6 R 156, 200/40 R6 151 GRK 3, 200/40 R6 R 206 body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial This certificate including newest products: -1[11]-
2 Gutenbergstr Greven Certificate 0799-CPD-20.2 Depotex R 302, R 402, R 602, R 802, R 1002, R 1502, R 4002, R 4002 G32 body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial This certificate including newest products: -2[11]-
3 Gutenbergstr Greven Certificate 0799-CPD-20.3 Secudrän R 151 DS 601 R 151, R 151 DS 601, R 201 DS 401 R 201, R 201 DS 401, R 201 DS 501 F, RW 201 DS 601 R 201, RW 301 DS 601 R 301, R 306 DS 601 R 306, R 335 DS 665 R 335, R 504 a DS 601; R 151 WD 451 R 151, R 151 WD 501 R 151, R 151 WD 701 R 151, R 201 WD 501 R 201, R 201 WD 501, R 201 WD 601 R 201, R 201 WD 601, R 201 Z WD 601 R 201 Z, R 201 Z WD 601 Z R 201 Z, RW 201 WD 601 R 201, R 301 Z WD 601(Z) R 301 Z, WAS 7; 151 WD 451, 151 WD , 151 WD 501, 151 WD , WAS 7, 151 WD , 151 WD , 201 WD , 201 WD 501, 201 WD , 201 WD 601, 201 WD , 301 WD , 301 WD , 504 a WD DS 601; XX5, XX5-141, XX5-141/141, XX8, XX8-141, XX8-141/141 body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial This certificate including newest products: -3[11]-
4 Gutenbergstr Greven Certificate 0799-CPD-20.4 Secugrid 30/30 Q6, 40/20 R6, 40/40 Q6, 60/20 R6, 60/60 Q6, 80/20 R6, 80/20 RS6, 80/40 R6, 80/80 Q6, 80/80 Q6-S, 100/100 Q6, 120/20 R6, 120/40 R6, 130/130 Q6, 180/20 R6, 200/40 R6, 200/40 RS6, 240/50 R6, 300/40 R6, 400/40 R6, 400/40 RS6, 400/60 R6, 400/100 R6, 450/90 R6; 20/20 Q1, 30/20 R1, 30/30 Q1, 30/30 Q1 LA, 40/40 Q1, 60/60 Q1, 80/80 Q1, 120/40 R1, 120/120 Q1, 150/40 R1, 175/30 R1 the further testing of samples taken at the factory in accordance with a prescribed test plan and that the notified body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the factory production control. This certificate including newest products: -4[11]-
5 Gutenbergstr Greven Certificate 0799-CPD-20.5 Secutex 131 GRK 2, 151 GRK 3, 153 GRK 2, 171 GRK 3, 171 GRK 3 Z, 201 GRK 3, 251 GRK 4, 251 GRK 4 Z, 301 GRK 5, 351 GRK 5, 401 GRK 5, 451 GRK 5, 501 GRK 5; R 156, R 186, R 206, R 306, R 306-Wolff; R 313, R 903; Bautenschutzmatte 1214 R, R 304, R 354, R 404, R 454 a, R 504, R 554, 574 G1, R 604, R 804, R 804 G1, R 804 G5, R 894, R 904 G5, R 1004, R 1004 a, R 1204, R 1334, R 1434 G5, R 1404, R 1504, R 1804, R 2004, R 2004 a, R 2004 G5, R 2224, R 2224 G7, R 2424, R 3004, R 3604; R 301, R 331 Z, R 331 G5 Z, R 401, R 401a, R 401 Z, R 441 Z, R 441 G5, R 441 G5 Z, R 451, R 501, R 551-B2, R 601, R 671 Z, R 671 G5 E, R 701, R 701 a, R 801, R 801 Z, R 801 G5 Z, R 881, R 881 Z, R 881-B2, R 891 Z, R 891 G5 Z, R 901 a, R 1001, R 1001 Z, R 1001-B2, R 1001-B2 a, R 1001-B2 G34, R 1201, R 1331 G1 Z, R 1331 G5 Z, RZ 1331, R 1401, R 1501, R 1501 Z, R 1601, R 1701, R 1801, R 1801 a, R 1901, R 2001, R 2001 Z, R 2001 G5, R 2001 G7, R 2201, R 2201 Z, R 2401 Z, R 2501, R 2701 G1 Z, R 3001 Z, R 4001 Z body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial This certificate including newest products: -5[11]-
6 Gutenbergstr Greven Certificate 0799-CPD-20.6 Terrafix 609, 813, 813 G10, 1006, 2006; B 301 G31, B 609, B 609 G5, B 609 G5 a, B 609 G5 c, B 813 body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial This certificate including newest products: -6[11]-
7 Gutenbergstr Greven Certificate 0799-CPD-20.7 Bentofix B 4000 DIBt, B 4000 DIBt a BZ 6000 DIBt body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial EN 13361, 13362, 13491, 13492, This certificate including newest products: -7[11]-
8 Gutenbergstr Greven Certificate 0799-CPD-20.8 Bentofix NSP 4000, NSP 4000-O, NSP , NSP 4300, NSP 4300-RC, NSP 4900, NSP , NSP 5300, NSP 5300 ÖN, NSP 5400 a, NSP 5600, NSP , NSP 6000 b, NSP a body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial EN 13361, 13362, 13491, 13492, This certificate including newest products: -8[11]-
9 Gutenbergstr Greven Certificate 0799-CPD-20.9 Bentofix B 4000, B (Ämmässuo); BFG 5000, BFG 5000-L, BFG 7000; BZ 13-B, BZ 6000 body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial EN 13361, 13362, 13491, 13492, This certificate including newest products: -9[11]-
10 Gutenbergstr Greven Certificate 0799-CPD Carbofol PEHD 406 1,00 G/G, PEHD 406 1,50 G/G, PEHD 406 2,00 G/G, PEHD 406 2,50 G/G, PEHD 406 3,00 G/G; PEHD 406 1,00 KN/MK, PEHD 406 1,50 KN/MK, PEHD 406 2,00 KN/MK, PEHD 406 2,50 KN/MK, PEHD 406 3,00 KN/MK; PEHD 406 1,00 MF/MF, PEHD 406 1,50 MF/MF, PEHD 406 2,00 MF/MF, PEHD 406 2,50 MF/MF, PEHD 406 3,00 MF/MF; PEHD 406 1,00 KN/G, PEHD 406 1,50 KN/G, PEHD 406 2,00 KN/G, PEHD 406 2,50 KN/G, PEHD 406 3,00 KN/G; PEHD 406 1,00 MF/G, PEHD 406 1,50 MF/G, PEHD 406 2,00 MF/G, PEHD 406 2,50 MF/G, PEHD 406 3,00 MF/G; LLDPE 1,00 G/G, LLDPE 1,50 G/G, LLDPE 2,00 G/G, LLDPE 2,50 G/G, LLDPE 3,00 G/G body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial EN 13361, 13362, 13491, 13492, This certificate including newest products: -10[11]-
11 Gutenbergstr Greven Certificate 0799-CPD Carbofol PEHD 507 1,00 G/G, PEHD 507 1,50 G/G, PEHD 507 2,00 G/G, PEHD 507 2,50 G/G, PEHD 507 3,00 G/G; PEHD 507 1,50 KN/MK, PEHD 507 2,00 KN/MK, PEHD 507 2,50 KN/MK, PEHD 507 3,00 KN/MK; PEHD 507 2,00 KN/G; PEHD 508 1,00 G/G, PEHD 508 1,50 G/G, PEHD 508 2,00 G/G, PEHD 508 2,50 G/G, PEHD 508 3,00 G/G body tbu - Institut für textile Bau- und Umwelttechnik GmbH, Greven,, has performed the initial EN 13361, 13362, 13491, 13492, This certificate including newest products: -11[11]-
TRAINING PROCEDURE FOR ALL APPROVED ASSESSORS THAT MONITOR COMPLIANCE OF CBs AND IFFO RS APPROVED AUDITORS TO THE IFFO RS PROGRAMME
TRAINING PROCEDURE FOR ALL APPROVED ASSESSORS THAT MONITOR COMPLIANCE OF CBs AND IFFO RS APPROVED AUDITORS TO THE IFFO RS PROGRAMME PURPOSE This procedure defines the method by which the standard holder
EC-Certificate of Conformity Certificate 1309 - CPD - 0155
CE1309 PIV Prüfinstitut Schlösser und Beschläge Velbert Wallstraße 41 D 42551 Velbert Director of the institute: Rainer Ehle, Dipl.-Ing. Tel 0049-(0)2051-9506 5 Fax 0049-(0)2051-9506 69 Mail: piv.velbert@t-online.de
1 D e r 1. S c h u l t a g M a l e a u s. S c h re i b e d e i n e n N a m e n u n t e r e i n K i n d. 1 2 D a s b i n i c h M a l e d i c h s e l b e r. 2 3 F re u n d e M a l e d i c h u n d d e i n
WORKING DOCUMENT FOR SCC CONSULTATION CONSTRUCT09/874 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL
WORKING DOCUMENT FOR SCC CONSULTATION CONSTRUCT09/874 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL New Approach Industries, Tourism and CSR Construction, Pressure Equipment, Metrology
PANTONE DS-C PANTONE C:0 M:5 Y:100 K:10 DS 2-1 C PANTONE C:0 M:3 Y:100 K:10 DS 2-2 C PANTONE C:0 M:0 Y:100 K:10 DS 2-3 C
18 November, 1999 10:32:02 PANTONE C:0 M:5 Y:100 K:0 DS 1-1 C PANTONE C:0 M:3 Y:100 K:0 DS 1-2 C PANTONE C:0 M:0 Y:100 K:0 DS 1-3 C PANTONE C:0 M:0 Y:85 K:0 DS 1-4 C PANTONE C:0 M:0 Y:70 K:0 DS 1-5 C PANTONE
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000035008. DURAG data systems GmbH Kollaustr.1 05 22453 Harnburg Germany
. Umwelt Bundes A_ TÜVRheinland Amt @ Precisely Right. For our Environment CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035008 Certified AMS: Manufacturer: Test Institute: D-EMS
The Danish Energy Agency will carry out inspections in October 2013. We will check the CE marking of the smoke alarms you sell or use.
Table of Contents Table of Contents... 1 The Danish Energy Agency will carry out inspections in September and October 2013... 2 What is CE marking of a construction product?... 3 Where can you find the
CERTIFICATE. No. P14218272. Order No. 191854 Page 1/5. Holte Industri as. Håtveitvegen 13 3810 GVARV Norway. Holte Industri a.s
Order No. 191854 Page 1/5 Applicant Manufacturer Factory s Trade mark A sample of the product was tested and found to be in conformity with Validity Additional information Additional model(s) 32A 230V
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000034862. Gaschromategraph GC 5000 BTX Type FID for Benzene
Umwelt Bundes Amt ror our Environ ment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000034862 Certified AMS: Manufacturer: Test Institute: Gaschromategraph
Testing and Certification Procedure
A PM 101E April 2011 Guideline for the Testing and Certification Procedure of the VDE Testing and Certification Institute (VDE Institute) (For information purpose only. In any case the German version shall
Certificate: 0000040211 / 29 April 2014
Test report: 936/21219690/A of 10 October 2013 Initial certification: 01 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter II, No. 2.2 Approved application The tested
Annex to the Accreditation Certificate D-ZE-11326-01-00 according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11326-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 27.01.2015 to 16.11.2019 Date of issue: 27.01.2015
Any potential user should ensure in consultation with the manufacturer that this AMS is suitable for the installation on which it will be installed.
Test report: 936/21210692/A of 30 March 2011 First certification: 29 July 2011 Run of validity until: 28 July 2016 Publication BAnz. 29 July 2011, No 113, page 2725, chapter I, No 4.1 Authorised application
FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES
PM 92E August 2004 Information on CE marking and on the EC Declaration of Conformity based on testing services and certificates of the VDE Testing and Certification Institute ASSOCIATION FOR ELECTRICAL,
Certificate: 0000040200 / 29 April 2014
Test report: 936/21218490/A of 02 December 2013 Initial certification: 01 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter II, No. 2.3 Approved application The tested
Certificate: 0000040200_01 / 9 September 2014
Test report: 936/21218490/B of 28 March 2014 Initial certification: 1 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 5 August 2014 B11, chapter II, no. 1.1 Approved application The tested AMS
Fire safety in buildings and implementation of European fire test standards
Fire safety in buildings and implementation of European fire test standards Dr Debbie Smith OBE Chair of CEN TC127 Fire Safety BRE Global Ltd, UK 18 th June 2014 Part of the BRE Trust Construction Products
The IUUI Perspective on Intuitive Interaction
The IUUI Perspective on Intuitive Interaction Jörn Hurtienne, Carsten Mohs, Habakuk Israel GRK prometei ZMMS, TU-Berlin Herbert A. Meyer artop GmbH, Institut at HU-Berlin Martin C. Kindsmüller IMIS, University
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Certificate: 0000039318 / 20 August 2013
Test report: 936/21220824/B of 15 March 2013 Initial certification: 23 July 2013 Expiry date: 22 July 2018 Publication: BAnz AT 23 July 2013 B4, chapter II, No. 2.3 Approved application The tested AMS
RS Components Available with Master Data Product Catalog in CADENAS PARTsolutions Availability of all digital product data from RS Components
RS Components Available with Master Data Product Catalog in CADENAS PARTsolutions Availability of all digital product data from RS Components Augsburg, Mörfelden-Walldorf, 9 th of August 2011. RS Components
Scheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme
Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification
Want to exceed customer expectations and stand out from the crowd? Third party approval of management systems from BRE Global. www.bre.co.
Want to exceed customer expectations and stand out from the crowd? Third party approval of management systems from BRE Global www.bre.co.uk Demonstrate your commitment to quality Quality Management Systems
ÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
Guidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC. GNB-CPD position paper from SG17 - EN 1090-1:2009
GNB-CPD SG17 Guidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC NB-CPD/SG17/09/069 Issued: 7 September 2009 APPROVED GUIDANCE GNB-CPD position paper from SG17
Construction Products Regulation Are you ready?
Construction Products Regulation Are you ready? Sarah Neary BE MBA CEng MIEI Senior Adviser Building Standards Environment, Community and Local Government What s going to change and for who? From July
DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
Guido Baum Phone: +49(0)221-806 2592 Mail: guido.baum@de.tuv.com www.qal1.de
Determination of CO 2 and N 2 O emissions with CEM Systems within the scope of greenhouse gas trading CEM 2014 Istanbul Thursday, 15 th May 2014 TÜV Rheinland Energie und Umwelt GmbH Guido Baum Phone:
Georgios Katsarakis Europäische Kommission
Georgios Katsarakis Europäische Kommission Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial
EN 15267 Type Approval & Certification of AMS (QAL1)
EN 15267 Type Approval & Certification of AMS (QAL1) Mr. Karsten Pletscher TÜV Rheinland Energie und Umwelt GmbH Am Grauen Stein, 51105 Cologne Germany Phone: ++49 221 806 2592 karsten.pletscher@de.tuv.com
Any potential user should ensure in consultation with the manufacturer that this AMS is suitable for the installation on which it will be installed.
Test report: 936/21206693/B of 28 March 2011 First certification: 29 July 2011 Run of validity until: 28 July 2016 Publication BAnz. 29 July 2011, No 113, page 2725, chapter I, No 4.2 Authorised application
FACTORY AUTOMATION MANUAL ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES
FACTORY AUTOMATION MANUAL ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES With regard to the supply of products, the current issue of the following document
Certificate: 0000038506 / 20 August 2013
Test report: 936/21219899/B of 28 March 2013 Initial certification: 23 July 2013 Expiry date: 22 July 2018 Publication: BAnz AT 23 July 2013 B4, chapter II, No. 1.1 Approved application The tested AMS
Final report Focus initiative 2010: PPE, Penetration resistance of safety footwear
Kassel Regional Administration Hessen Equipment Testing Office Final report Focus initiative 2010: PPE, Penetration resistance of safety footwear Department 35.3 Centre for Product Safety and Hazardous
TENSIONMETER ** code 183_LNRSTW **
Electronic tension meter for applications in textile and wire industry. 9 Tension ranges from 0.1-200 cn to 5-50 dan. Versatile instruments usable for applications in textile industry: e. g. 50 up to max.
Fuji Electric. (Edition 5.0) Green Procurement Guideline. April 2013. Fuji Electric Co., Ltd.
Fuji Electric Green Procurement Guideline (Edition 5.0) April 2013 Fuji Electric Co., Ltd. Contents I. Fuji Electric s environmental preservation activities -----------------------------------------------------------------
Innovative Technologien zur Erzeugung und Verwertung von Biogas
Großmann Ingenieur Consult GmbH Innovative Technologien zur Erzeugung und Verwertung von Biogas Offshore Technologies and Steelworks Stainless Steel and Aluminum Surface Finishing Design and Engineering
Certificate: 0000038506_01 / 29 April 2014
Test report: 936/21219899/C of 30 August 2013 Initial certification: 23 July 2013 Expiry date: 22 July 2018 Publication: BAnz AT 01 April 2014 B12, chapter II, No. 1.1 Approved application The tested AMS
CERTIFICATE. about Product Conformity (QAL 1) Number of Certificate: 0000028755_01. TÜV Rheinland Energie und Umwelt GmbH
Umwelt Bundes Amt For our Environment /;!,. TÜVRheinland Precisely Right. CERTIFICATE about Product Conformity (QAL 1) Number of Certificate: 0000028755_01 Certified AMS: Manufacturer: Test Institute:
The Centre for Bioethics
- V 1 [ 1] F W () k k J G k z W k G x : q G J () : () N 1 9 J ON L U ON O N N P 7 1 R Y J N U NR FOR G O NY UMN & U ) ( x 1 G 6 O J ' 11 F J M ) ( L L R G J x V M x M MM k : 6 O 1 5 YW N 55 k z k R M F
Construction Products Regulation
Construction Products Regulation (305/2011/EU) Engineers Ireland 27 th September 2013 Sarah Neary BE MBA CEng MIEI Senior Adviser Building Standards Environment, Community and Local Government What has
Compatible with All FXS Ports of Digium Asterisk VoIP PBX
X100P.com s STOC-FX World s First Professional Grade VoIP FXS to FXO Converter Compatible with All FXS Ports of Digium Asterisk VoIP PBX Copyright (c) 2006 by X100P.com All rights reserved including the
Processes for the Development of Healthcare Applications. Christian Johner
Processes for the Development of Healthcare Applications Christian Johner Process/Life-Cycle Models: The true history Directives and Standards: Requirements with Respect to Processes Conclusion, Recommendations
InProceedingsofthe14thInternationalIFIPSymposiumonProtocolSpecication,Testing,andVerication,pages339{346,Chapmann&Hall,1994
InProceedingsofthe14thInternationalIFIPSymposiumonProtocolSpecication,Testing,andVerication,pages339{346,Chapmann&Hall,1994 CompositionalSpecicationandVericationof Abstract Dept.ofComputerScience,DortmundUniversity,D-44221Dortmund,Germany
D+H EURO-SHEV: Smoke ventilation according to DIN EN 12101-2
D+H EURO-SHEV: Smoke ventilation according to DIN EN 12101-2 2 Introduction Since September 2006, all natural smoke and heat exhaust ventilators (NSHEVs) must provide usability certification in accordance
Check-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
Motivation by tradition. Stepping stones on our way. ``Founded in 1938 as a painting firm. ``Total destruction in World War II. ``1946: 20 employees
Motivation by tradition Stepping stones on our way ``Founded in 1938 as a painting firm ``Total destruction in World War II ``1946: 20 employees ``1955: over 100 employees ``Starting the scaffolding business
Labor für Stahl- und Leichtmetallbau Munich University of Applied Sciences Head of institute: Prof. Dr.-Ing. Ö. Bucak
Member of staff Dr. Ing. Chr. Schuler Dipl. Ing. A. Lorenz Dipl. Ing. S. Koch Dipl. Ing. J. Lorenz Dipl. Ing. S. Bugger Dipl. Ing. M. Binder Dipl. Ing. S. Rodic Dipl. Ing. M. Meissner Circle of consultants
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000035011. NIS Ingenieurgesellschaft mbh lndustriestr. 13 63755 Alzenau Germany
Umwelt Bundes Amt For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035011 Certified AMS: Manufacturer: Test Institute: UmweltOffice
Zebra Printer Overview
Original- Zebra Printer Overview Desktop Printers Verbrauchsmaterialien für Zebra-Drucker hinterlassen einen hervorragenden Eindruck. Etiketten, Preisschilder und Farbbänder von Zebra wurden speziell für
European Technical Approval ETA-08/0121
European Technical Approval - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and use of construction
Approved application The certified AMS is suitable for continuous ambient air monitoring of O 3 (stationary operation).
Fehler! Verweisquelle konnte nicht / Fehler! Verweisquelle konnte nicht Test report: 936/21207124/A1_DE of 22 August 2007 Addendum 936/21219874/D of 11 October 2012 Initial certification: 05 March 2013
Victims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years
Claim#:021914-174 Initials: J.T. Last4SSN: 6996 DOB: 5/3/1970 Crime Date: 4/30/2013 Status: Claim is currently under review. Decision expected within 7 days Claim#:041715-334 Initials: M.S. Last4SSN: 2957
Early Software Product Improvement with Sequential Inspection Sessions: An empirical Investigation of Inspector Capability and Learning Effects
Early Software Product Improvement with Sequential Inspection Sessions: An empirical Investigation of Inspector Capability and Learning Effects Dietmar Winkler, Bettina Thurnher, Stefan Biffl Institute
Certificate: 0000040334 / 9 September 2014
Test report: 1724510 of 9 January 2013 Initial certification: 5 August 2014 Expiry date: 4 August 2019 Publication: BAnz AT 5 March 2013 B10, chapter III, no. 1.1 Approved application The tested system
Policy Briefing. Frequently Asked Questions on the Construction Products Regulation and CE marking. December 2012. Background
Frequently Asked Questions on the Construction Products Regulation and CE marking December 2012 Background The following list of frequently asked questions has been produced by an MPA Working Group and
Added value with the MPA NRW-Quality Label
MPA NRW n n n independent competent reliable The MPA NRW offers its clients services like material tests, manufacturer surveillance or product certification in the sphere of building products, building
Bachelor of Science or Arts Degree Minor Environmental Science Check List
Mathematics & 6 LA 10101 Freshman Success Mathematics & 6 LA 10101 Freshman Success Mathematics & 6 LA 10101 Freshman Success Mathematics & 6 LA 10101 Freshman Success Mathematics & 6 LA 10101 Freshman
European Technical Approval ETA 13/0526
European Technical Approval ETA 13/0526 Trade Name Holder of the approval Website Generic type and use of construction product DOLCEA i3 PCIM S.A. Rue du Péquet 54 5590 Achene (Ciney) Belgium www.isoproc.eu
PRCP CE. Version 5.0 of 16 June 2013. Date of entry into force: 1 July 2013
npo Founded by SECO and BBRI PARTICULAR RULES FOR THE CERTIFICATION OF PRODUCTS AND PRODUCTION CONTROL SYSTEMS WITHIN DE FRAMEWORK OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION N 305/2011 PRCP CE Version
CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: 0000037051. GM32 ln-situ-gasanalysator model Cross Duct for NO and S02
Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000037051 Certified AMS: Manufacturer: Test Institute: GM32 ln-situ-gasanalysator
Labour Department. List of Legal Restrictions and Obligations
Labour Department List of Legal Restrictions and Obligations Legal Reference Section 72A of Employment Ordinance, Cap 57 Section 3(2) of Factories and (Safety Management) Section 4 of Factories and (Asbestos)
TOPATEC GmbH has been manufacturing their own design of waste water systems since 1999.
PLUMBING TOPATEC GmbH has been manufacturing their own design of waste water systems since 1999. Important processes and products designed by TOPATEC are under legal protection. TOPATEC with its constantly
S / RA / EXT / HEFS / 35 EXTENT MAP FLOOD EXTENT TIDAL FLOODING RURAL AREA HIGH END FUTURE SCENARIO. Location Plan :
Government of Osi permit number EN-- NOTE : MORE DETAILED MAPS SHOWING COMBINED TIDAL AND FLUVIAL FLOOD HAZARD FOR THIS AREA HAVE BEEN PREPARED UNDER THE LEE CFRAM STUDY. PLEASE REFER TO WWW.LEECFRAMS.IE
MANDATORY DOCUMENTS AS PRESCRIBED BY SEBI & EXCHANGES
MANDATORY DOCUMENTS AS PRESCRIBED BY SEBI & EXCHANGES 2-3 4-6 7-11 12-15 16-17 18-21 22 7 Voluntary Additional Tariff Sheet Others service charges levied on the client for the services opted by them, if
The Danish Enterprise and Construction Authority to inspect CE marking of windows and pedestrian doors
23. december 2010 The Danish Enterprise and Construction Authority to inspect CE marking of windows and pedestrian doors The Danish Enterprise and Construction Authority s market surveillance of construction
[Docket No. FAA-2014-0577; Directorate Identifier 2013-SW-042-AD; Amendment 39-18184; AD 2015-12-09]
![[Docket No. FAA-2014-0577; Directorate Identifier 2013-SW-042-AD; Amendment 39-18184; AD 2015-12-09]](/thumbs/40/21515475.jpg "[Docket No. FAA-2014-0577; Directorate Identifier 2013-SW-042-AD; Amendment 39-18184; AD 2015-12-09]")
[Federal Register Volume 80, Number 117 (Thursday, June 18, 2015)] [Rules and Regulations] [Pages 34831-34833] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc
Der Bologna- P roz es s u nd d i e S t aat s ex am Stefan Bienefeld i na Service-St el l e B o l o g n a d er H R K Sem in a r D er B o l o g n a P ro z es s U m s et z u n g u n d M it g es t a l t u
Polyurea Coatings in Secondary Containment with National Technical Approval. Jürgen Magner Kiwa Polymer Institut Flörsheim / Germany
Polyurea Coatings in Secondary Containment with National Technical Approval Jürgen Magner Kiwa Polymer Institut Flörsheim / Germany concrete substrate high rack tanks organic coating secondary containment
DOCUMENT CAESAS/1: SCHEME DESCRIPTION AND BENEFITS
CONFORMITY ASSESSMENT FOR THE EXECUTION OF STEEL & ALUMINIUM STRUCTURES DOCUMENT CAESAS/1: SCHEME DESCRIPTION AND BENEFITS 2nd Edition July 2012 Issued under the authority of the Governing Board for Certification
C e r t i f i c a t e
C e r t i f i c a t e of Continued Compliance Certificate No.: 13229052/AA/02 In compliance with the procedure specified in RD_070, Telefication declares that the stated alarm equipment complies with the
NBOG s Best Practice Guide 2006-1
Antworten und Beschlüsse des EK-Med Benennung der Stellen 3.13 B 19 Change of Notified Body Herkunft Notified Body Operations Group Quellen NBOG BPG 2006-1 Bezug 93/42/EWG Artikel 11, 16, MPG 16, MPV 3
PRESENT RATES OF CONTRIBUTION
PRESENT RATES OF CONTRIBUTION BY CONTRIBUTION ACCOUNTS ADMINISTRATION ACCOUNTS EPF EPS EDLI EPF @@ EDLI @@ EMPLOYEE 12 /10 ## 0 0 0 0 EMPLOYER Difference of EE share and Pension Contribution 8.33 ## 0.5
Quality Assurance Agreement with Production Material Suppliers. History of revisions
Modifications S 296001 Part 1 revision 2008/11 to 2015/04 Editorial changes (displayed in green letters) Project Classification PE changed to "Risk Level RL" also in Appendices 2 to 5 Chapter 4: SupplyOn
Certification of Plastic Materials
VDE Testing and Certification Institute Merianstraße 28 D-63069 Offenbach A Certification of Plastic Materials Glow-Wire Flammability Index GWFI Glow-Wire Ignition Temperature GWIT Comparative Tracking
Ready to Test Process Standard Operation Procedures (SOP) for Manor suppliers
Consumer Testing Services Date : Pages : Author(s) : Approved by: September 2015 1-11 Manor SGS Ready to Test Process Standard Operation Procedures (SOP) for Manor suppliers Manor AG Rebgasse 34 CH-4005
Annex to the Accreditation Certificate D-ZE-12007-01-02 according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-02 according to DIN EN ISO/IEC 17065:2013 Period of validity: 06.05.2014 to 05.05.2019 Holder of certificate: TÜV
Table of Contents DEPARTMENT OF LABOR OFFICE OF WORKERS' COMPENSATION. Title 40 Labor and Employment Part I. Workers' Compensation Administration
Table of Contents DEPARTMENT OF LABOR OFFICE OF WORKERS' COMPENSATION Title 40 Labor and Employment Part I. Workers' Compensation Administration Chapter 11: 1101. Purpose...11-1 1103. Forms - Preparation
Germany's path towards a nearly climate-neutral residential building stock 2050: Comparison of greenhouse gas mitigation strategies
Mitglied der Helmholtz-Gemeinschaft Germany's path towards a nearly climate-neutral residential building stock 2050: Comparison of greenhouse gas mitigation strategies P. Hansen, W. Kuckshinrichs, P. Markewitz
Global supply chain quality improvements with certification and what can be done beyond
Global supply chain quality improvements with certification and what can be done beyond - TÜV Rheinland Industrie Service GmbH TÜV Rheinland: 140 years of tradition and innovation Your advantage: our experience.
AVERTISSEMENT Vous trouverez ci-dessous la version française de ce Guidance Paper suivie de la version anglaise
AVERTISSEMENT Vous trouverez ci-dessous la version française de ce Guidance Paper suivie de la version anglaise !!"#$%$ %$ &'# %%%( $ # $ %$ # %%") %$ #% $!* $(%$ ($%% +$ (,& #$- * ($%%* $ $ % + $%%$ %!%%
Section 303(g)(2)(G) of the Controlled Substances Act (21 U.S.C. 823(g)(2)(G)) is amended. (1) by striking clause (ii) and inserting the following:
Section XX. Definitions. Section 303(g)(2)(G) of the Controlled Substances Act (21 U.S.C. 823(g)(2)(G)) is amended (1) by striking clause (ii) and inserting the following: (ii) The term qualifying practitioner
System Basics for the certification of sustainable biomass and bioenergy
ISCC 201 System Basics System Basics for the certification of sustainable biomass and bioenergy ISCC 10-04-19 V 1.15 10-04-19 Copyright notice ISCC 2010 This ISCC document is protected by copyright. It
General requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
Data Protection Services by SPIE GmbH. SPIE, sharing a vision for the future
Data Protection Services by SPIE GmbH SPIE, sharing a vision for the future Nationwide Data Protection Services The Data Protection Services are a consulting entity of SPIE GmbH. We perform the tasks of
National Asbestos Profile Germany 2014
Germany 2014 National Asbestos Profil Germany 2014 National Asbestos Profile Germany, 2014 Packroff, BAuA 1 20 April 2016 Declaration of Parma/Italy, 2010 to develop national programmes for the elimination
Notes on the certification and surveillance of management systems for companies with subsidiaries
Editor: Publisher: VdS Schadenverhütung VdS Schadenverhütung VdS-Leaflet Notes on the certification and surveillance of management systems for companies with subsidiaries VdS 2836en : 2013-04 Contents
EM Hold-open magnets
EM Hold-open magnets DORMA EM Hold-open magnets A modular system for fire and smoke doors Setting new standards for hold-open magnets DORMA s new range of EM hold-open magnets provides the perfect complement
Standard Operation Procedures (SOP) for
Consumer Testing Services Date : Pages : JAN 2015 1 of 7 SOP for Manor suppliers Author(s) : Approved by: SGS CH Manor AG Standard Operation Procedures (SOP) for Manor suppliers Manor AG Rebgasse 34 CH-4005
U-LINER AC NEW AND UNIQUE ADHESIVE PE-LINER FOR DOMESTIC CONNECTIONS. www.rehau.com. Construction Automotive Industry
U-LINER AC NEW AND UNIQUE ADHESIVE PE-LINER FOR DOMESTIC CONNECTIONS www.rehau.com Construction Automotive Industry NEW ADHESIVE U-LINER AC Modern trenchless renovation and refurbishment processes have
Certificate: 0000040216 / 29 April 2014
Test report: 936/21209885/G of 20 September 2013 Initial certification: 01 April 2014 Date of expiry: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter IV, No. 7.3 Approved application The
Contract Management Housing Inspection Services. April 30, 2010
Contract Management Housing April 30, 2010 Introduction Mr. Bill Boyer Supervisory Program Specialist VA - NPSC 2 Agenda (CMHIS) Overview Roles and Responsibilities Housing Inspection Process Key deliverable
Fachbereich I Wirtschafts- und Gesellschaftswissenschaften. Overview Department I Business Administration and Social Studies
Overview Department I Business Administration and Social Studies Fachbereich I Wirtschafts- und Gesellschaftswissenschaften Prof. Dr. Kurt Bangert Dean Department I Department I: Overview 9 programmes
FIRE LABORATORIES approved by CERTIFER to perform tests according to EN 45545-2
: = ISO17025 ministerial approval; =ISO17025 accreditation, on other tests; =ISO17025 accreditation, covering the test. ACCREDITATIONS GRANTED BY IAF/ILAC/EA MEMBERS ONLY : = participation to the 2012
NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually:
IV. NEW AND GLOBAL + OLD APPROACH PRODUCT LEGISLATION: A. Standard questionnaire to be filled for each sector individually: Sector: Textile 96/74/EC: Directive 96/74/EC of the European Parliament and of
Österreichisches Institut für Bautechnik Schenkenstrasse 4 1010 Vienna Austria T +43 1 533 65 50 F +43 1 533 64 23 mail@oib.or.at www.oib.or.
Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating