electronics industry and with good reason. For more than 30 years, the Erem manufacturing

Transcription

1

2

3 ELECTRONICS PLIERS, CUTTERS AND TWEEZERS The quality and performance of Erem precision pliers, cutters, and tweezers is legendary in the electronics industry and with good reason. For more than 30 years, the Erem manufacturing facility in Switzerland has been producing some of the most skillfully designed and carefully crafted hand tools in the world in order to achieve finished products of unsurpassed precision, durability, and ease of operation. Enhancing the quality of the tools themselves is the Erem philosophy of providing an unmatched level of customer service. Beginning with an on-site audit of your specific hand tool requirements by a highly eperienced electronics manufacturing engineer, Erem will make recommendations on how to increase hand tool efficiency to maimize production. Erem can even provide custom tools, designed for your specific application. With its wide selection of standard products, custom product capability, and its commitment to outstanding customer service, Erem stands poised to remain the leader in high quality hand tools for the electronics industry or wherever precision hand tools are needed. CONTENTS 4 Precision Tweezers 12 Cutters 30 Pliers cooperhandtools.com/erem 3 3

4 PRECISION TWEEZERS TWEEZERS Erem tweezers are high precision tools of constant high quality. Precise finished and symmetrical tips together with easy handling and perfect balance makes them outstanding tools. The range of Erem tweezers covers a wide diversity of applications. It is produced in many shapes and can be manufactured from different materials. The most popular models are available in a lower cost economy (SL) range. On all models, the part number is stamped on the tweezers, not printed. THE MATERIAL Erem offers a wide variety of materials, carbon steel, stainless steel, Erem special stainless steel, Nickel plated, Brass or Titanium. The most common materials are eplained below: CARBON STEEL Carbon steel tweezers have hard tips but the rust resistance is low and they are magnetic. STAINLESS STEEL Tweezers from stainless steel have strong tips and are rust resistant but are not as hard and long lasting as carbon steel tweezers. EREM SPECIAL STAINLESS STEEL This grade of steel is a non magnetic, rust resistant, anti-acid alloy. It is temperature resistant up to 300 C. ERGONOMIC Developed by Erem, tweezers with ergonomically shaped handles to alleviate the problem of Repetitive Strain Injuries (RSI) and reduce operator fatigue. The range has been selected to include the most popular tip shapes (see page 10). The main features are: - ergonomic design for operator comfort and ease of control - two color, thermally insulated soft grip handles molded from a synthetic material - ESD safe - the grips absorb heat for additional user protection - manufactured from non-magnetic, acid resistant, stainless steel alloy - supplied in a rigid, transparent plastic bo for protection and storage The prefi for ergonomic tweezers is E. 4 4

5 PRECISION TWEEZERS POINTED TIPS STRAIGHT POINTED TIPS STRAIGHT Main applications: for conventional and precision handling of small parts like tissue, components, wires. For tasks in micro electronics industry, medicine, laboratories and other applications where high precision is required. LENGTH 3.15" (80 MM) M5S 3.15" (80 mm) 0.21 oz/6 g Stainless steel, anti-glare finish Micro tweezers, very small, very fine tips, e.g. for work under microscope. LENGTH 4.25" (108 MM) ACSA 4.25" (108 mm) 0.56 oz/16 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with serrated grips for anti-slip handling. For bending and handling. LENGTH 4.33" (110 MM) 3CSA 4.33" (110 mm) 0.39 oz./11 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for delicate circuit board assembly. EROP3CSA 4.33" (110 mm) 0.39 oz./11 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 3CSA. EROP3CSAV 4.33" (110 mm) 0.39 oz./11 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 3CSA, carded. 3CSASL 4.33" (110 mm) 0.39 oz./11 g Special stainless steel, anti-glare finish, non-magnetic Same as 3CSA but Italian grade. cooperhandtools.com/erem 5 5

6 PRECISION TWEEZERS POINTED TIPS STRAIGHT LENGTH 4.75" (120 MM) 3SA 4.75" (120 mm) 0.49 oz/14 g Special stainless steel, anti-glare finish,non-magnetic Precision tweezers for micro electronics. Precision work EROP3SA 4.75" (120 mm) 0.49 oz/14 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 3SA 3SASL 4.75" (120 mm) 0.49 oz/14 g Special stainless steel, anti-glare finish, non-magnetic Same as 3SA but Italian grade. 1SA 4.75" (120 mm) 0.49 oz/14 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for general use. 1SASL 4.75" (120 mm) 0.49 oz/14 g Special stainless steel, anti-glare finish, non-magnetic Same as 1SA but Italian grade. OOSA 4.75" (120 mm) 0.71 oz/20 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers for general purpose e.g. electronic assembly, very sturdy. EROPOOSA 4.75" (120 mm) 0.71 oz/20 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 00SA. OODSA 4.75" (120 mm) 0.71 oz/20 g Special stainless steel, anti-glare finish, non-magnetic Same as 00SA but with serrated grips and inside serrated tips. EROPOODSA 4.75" (120 mm) 0.71 oz/20 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 00DSA. LENGTH 4.92" (125 MM) AASA 4.92" (125 mm) 0.59 oz/16 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with strong but fine tips. For universal use. EROPAASA 4.92" (125 mm) 0.59 oz/16 g Special stainless steel, anti-glare finish, non-magnetic Economy version of AASA. AM 4.92" (125 mm) 0.59 oz/16 g Brass, polished Precision tweezers brass. Soft metal protects sensitive parts against damage. Anti-sparking. LENGTH 5.12" (130 MM) 249SA 5.12" (130 mm) 0.71 oz/20 g Special stainless steel / PPS, anti-glare finish, nonmagnetic ESD safe, suitable for fiber optics Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250 C (480 F). Resistant to acids and solder. Waterproof, ESD safe. Does not damage fiber optic cores. LENGTH 5.91" (150 MM) 29SA 5.91" (150 mm) 0.92 oz/26 g Special stainless steel, anti-glare finish, non-magnetic, reverse action Fiber-grip handles for heat protection. Reverse action for permanent holding parts. 6 6

7 PRECISION TWEEZERS POINTED TIPS STRAIGHT RELIEVED LENGTH 4.53" (115 MM) POINTED TIPS STRAIGHT RELIEVED Main application: for better product visibility e.g. under microscope or working in confined areas, for handling tiny components. 5SA 4.53" (115 mm) 0.42 oz/12 g Stainless steel, anti-glare finish Precision tweezers with very fine tips e.g. for handling fine wires. EROP5SA 4.53" (115 mm) 0.42 oz/12 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 5SA. EROP5SAV 4.53" (115 mm) 0.42 oz/12 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 5SA, carded. 5SASL 4.53" (115 mm) 0.42 oz/12 g Special stainless steel, anti-glare finish, non-magnetic Same as 5SA but Italian grade. 2SA 4.53" (115 mm) 0.56 oz/16 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers with medium tips. 2SASL 4.53" (115 mm) 0.56 oz/16 g Special stainless steel, anti-glare finish, non-magnetic Same as 2SA but Italian grade. 5ASA 4.53" (115 mm) 0.42 oz/12 g <) 15, special stainless steel, anti-glare finish, non-magnetic Precision tweezers oblique, relieved. Fine tips. 5ASASL 4.53" (115 mm) 0.42 oz/12 g <) 15, special stainless steel, anti-glare finish, non-magnetic Same as 5ASA but Italian grade. EROP5ASA 4.53" (115 mm) 0.42 oz/12 g <) 15, special stainless steel, anti-glare finish, non-magnetic Economy version of 5ASA. LENGTH 4.73" (120 MM) 258SA 4.72" (120 mm) 0.53 oz/15 g Special stainless steel/pps, anti-glare finish, nonmagnetic, ESD safe Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250 C (480 F). Resistant to acids and solder. Waterproof, ESD safe. cooperhandtools.com/erem 7 7

8 PRECISION TWEEZERS POINTED TIPS CURVED LENGTH 4.53" (115 MM) POINTED TIPS CURVED Main application: for better product visibility and handling e.g. working in confined areas and under microscope. 51SA 4.53" (115 mm) 0.42 oz/12 g <) 30, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. Very fine tips. LENGTH 4.75" (120 MM) 7SA 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved, relieved. For easy handling in confined areas. 7SASL 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Same as 7SA but Italian grade. EROP7SA 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 7SA. LENGTH 5.5" (140 MM) 65ASA 5.5" (140 mm) 0.39 oz/11 g <) 50, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved. Very fine points. For handling etra fine components. LENGTH 5.9" (150 MM) 24SA 5.9" (150 mm) 0.78 oz/22 g <) 40, special stainless steel, anti-glare finish, non-magnetic Precision tweezers curved. Serrated grips and inside serrated tips. Alignment pin. Useful for all soldering jobs and assembly. 8 8

9 PRECISION TWEEZERS FLAT ROUND TIPS STRAIGHT FLAT ROUND TIPS STRAIGHT Main application: for conventional holding and gripping applications. LENGTH 4.75" (120 MM) 2ASA 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish,non-magnetic Precision tweezers with medium tips for gripping. EROP2ASA 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Economy version of 2ASA EROP2ASAV 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Same as 2ASA, but carded. 2ASASL 4.75" (120 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic Same as 2ASA, but Italian grade. 2ASARU 4.75" (120 mm) 0.56 oz/16 g Special stainless steel/teflon coated, anti-glare finish, non-magnetic Same as 2ASA but coated tips for handling adhesive parts, gaskets, Kapton ribbons, labels with negligible capillary effect. cooperhandtools.com/erem 9 9

10 PRECISION AND SMD TWEEZERS POINTED TIPS ERGONOMIC HANDLES* MAIN APPLICATIONS: Thermally insulated soft grips, ESD safe, ergonomically shaped to reduce operator s hand fatigue. E3SA 4.75" (120 mm) 0.88 oz/25 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers, for micro electronics. E5SA 4.75" (120 mm) 0.88 oz/25 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, very fine tips, e.g. for handling fine wires. E3CSA 4.75" (120 mm) 0.88 oz/25 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, long fine tips, for delicate circuit board assembly. EOOSA 4.75" (120 mm) 0.88 oz/25 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, fine tips, for general use. Very sturdy. EOODSA 4.75" (120 mm) 0.88 oz/25 g Same as EOOSA but with serrated tips. E7SA 4.75" (120 mm) 0.99 oz/28 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers curved, fine tips, for easy manipulation in confined areas. E2ASA 4.75" (120 mm) 0.99 oz/28 g Special stainless steel, ergonomic handles, non-magnetic, ESD-safe Ergonomic precision tweezers straight, flat round tips, for gripping. E15AGW 4.5" (115 mm) 1.09 oz/31 g Carbon steel, ergonomic handles, non-magnetic, ESD-safe (Not Shown) Ergonomic precision tweezers, cutting tweezers with oblique head. Induction hardened cutting blades improves cutting capability and life time. For soft wires up to 0.25mm. ANGLED HEAD Note: Color coatings subject to variations without prior notice. * Ergonomic features see page 4. ANGLED HEAD LENGTH 4.5" (115 MM) Main application: for handling chips or miniature SMD components. For mounting on SMD boards or Ceramic substrates. 102ACA 4.5" (115 mm) 0.53 oz/15 g Special stainless steel, anti-glare finish, non-magnetic SMD tweezers with angled head and blunt edges to avoid board damage. For handling small components, mounting on SMD boards, hybrids ICs, watch hands, etc

11 SMD AND CUTTING TWEEZERS ROUNDED HEAD LENGTH 4.75" (120 MM) 40SA 4.33" (110 mm) 0.53 oz/15 g Ø 0,4 mm, special stainless steel, anti-glare finish, non-magnetic Straight, serrated grips. For gripping wires as small as 0.015" and small cylindrical parts. Miniature component handling Tweezer. Anti-glare finish, non-magnetic. CUTTING CUTTING Main application: e.g. for cutting soft wires on micro electronics circuits, very precise. LENGTH 4.5" (115 MM) 15AGS 4.5" (115 mm) 0.74 oz/21 g Anti-glare finish, carbon steel Cutting tweezers with fine oblique head and induction hardened cutting blades for increasing life time. For soft wires up to Ø 0,25 mm. 15AGW 4.5" (115 mm) 0.92 oz/26 g Anti-glare finish, carbon steel Cutting tweezers with oblique head. Induction hardened cutting blades improves cutting capability and life time. For soft wires up to Ø 0,25 mm. cooperhandtools.com/erem 11 11

12 CUTTERS AND PLIERS ATTRIBUTES OF CUTTERS AND PLIERS EREM CUTTERS AND PLIERS Erem cutters and pliers are unique in the degree of quality, precision, reliability, ergonomy and long life they offer when compared to other professional tools, for the following reasons: THE STEEL Erem cutters and pliers are not forged. They are manufactured from billets of high grade tool steel, which uses a Swiss developed lamination technique. It employs a multiple etrusion process to super compact the steel imparting additional strength and toughness to the tools. This results in reliable and long lasting tools. THE JOINTS The surfaces between the two halves of the joint are machine finished and in conjunction with the interlocking precision screw that is used to join both halves together ensure wobble free operation and eliminates blade overlap which could cause mechanical shock and damage components. THE SPRINGS The return springs are mounted internally in the head of the tools and are guaranteed for 1 million operations. They operate with a constant resistance over the movement of handles to reduce operator fatigue making them superior to leaf or coil springs. EMOS Erem Maimum Opening Stop, limits the handle spread by preventing the tips of the blades from opening more than 5mm. To promote operator comfort and ergonomics

13 CUTTERS AND PLIERS CUSTOMER SERVICE 1. SPARE PARTS Erem pliers and cutters and their spare parts are guaranteed against manufacturing defects. The following parts will be supplied free of charge should a defect be found - Foam grips - Springs - Opening stops Please contact your local Cooper Hand Tools office for advice on procedure. 2. RESHARPENING Erem cutters can be returned to Cooper Hand Tools for resharpening. It is possible to resharpen tools up to three times depending on their condition. Tools will be returned to you fitted with new handles depending on their shape. SPECIALS Erem is able to offer tools for special applications without minimum order quantity. Dimensioned drawings /and or samples of your application will be required. ERGONOMIC HANDLES The Work Related Upper Limb Disorder (WRULD) is a muscular skeletal problem related to the arm. WRULDS can be caused by positional fatigue or nerve damage caused e.g. by repetitive use of non ergonomic hand tools, the commonly named Repetitive Strain Injuries (RSI). The ability to grip and hold objects can be impaired. Repetitive movements can cause compression of the median nerve and produce sensations of pins and needles. WRULDS is a direct result of companies manufacturing processes and working practices and will as result be detrimental to the quality of a companies products. Therefore a reduction of the factors which cause WRULDS will improve working practice and product quality. In fact it is arguable that without quality working practices there can be no quality product. MEDIAN NERVE MUSCLES AT BASE OF THUMB CARPAL BONES MEDIAN NERVE TENDONS CARPAL TUNNEL To alleviate the problem of RSI, Erem has designed a range of tools with ergonomic handles.the compound curves of the handles of the Erem ergonomic cutters and pliers allow the pressure applied to the handles when cutting or gripping to be evenly spread over the palm of the hand. The thumb and fingers are self-positioned by the handles, making the tool comfortable for the operator to use and reducing the incidence of WRULDS.The comfortable foam grips are ESD safe and easily interchangeable. The following tools are available with ergonomic handles: - Side Cutters see page Tip Cutters see page Pliers see page 31 cooperhandtools.com/erem 13 13

14 CUTTERS AND PLIERS ESD SAFETY The foam cushion grips are static dissipative and are fitted as standard on all models. Conductive Static Dissip. Antistatic Insulating Ω/cm 2 EMI/RF Sources:DOD/CECC Erem-Cutters + Pliers COST PER CUT COMPARISON The best way to compare the real costs between different hand tools is to consider the number of cuts - besides the work itself and the performance.the parameters below indicate how Erem tools - representing a higher initial investment - become even more economical than lower quality cutters on a medium or long-term basis. A = Low-end tools B = Medium Quality C = Erem 1,2 = average stages of Erem cutters needing resharping. 100 Price C 1 B A No. of cuts ( 1,000) 14 14

15 A Mu L 13 CUTTERS AND PLIERS FORM CUTTING CAPABILITIES Side Cutters* Model 512N 522N 532N 577E 592E 595E 597E 599E ma. Cu (Copper) mm ø 0,1-0,6 ø 0,6-1,2 ø >1,2 Cut* SF F FF SIZE S M L A Semi Flush SF Flush F Super Full Flush FF S9 Mu L 13 Tip Cutters* Model 503E 504AE 570E 572E 573E 575E 582E 582EW ma. Cu (Copper) mm ø 0,1-0,6 ø 0,6-1,2 ø >1,2 FORM 1 2 Cut* SF F 612N 622N 622NA 622NB 632N 670EP 1503N 2282E E 776E 792E 812N 822N Semi Flush SF = SEMI FLUSH 1512N 1522N 1522NA 1522NB 2212E 2222E 2232E Flush F Super Full Flush FF = FLUSH = EREM SUPER FULL FLUSH Description see page 16 *Note: There is no ma. Cu indication for Tungsten Carbide cutters. Please ask for the according cutting capabilities. cooperhandtools.com/erem 15 15

16 SIDE CUTTERS SIDE CUTTER ATTRIBUTES SIDE CUTTERS Erem offers a wide range of precision side cutters. To establish which cutter is correct for your application follow the steps below HEAD FORM OVAL HEAD The most common head shape. For standard cutting applications where access is not a problem. TAPERED HEAD For cutting tasks where easier access is required. The tapered head shape allows better tip access than the oval head but without much reduction to cutting capability. TAPERED RELIEVED HEAD For cutting in confined areas. This is the smallest head shape available. One side is cut away for access even in confined areas. Due to the cut away the cutting capability is reduced. Flush tip cutting. CUT SEMI-FLUSH These blades allow a very high resistance. Will cut from tip to heel, malleable wires like Copper as well as hard wires. Leaves a pinch at the end of the wire. For all applications where the cutting type is not so important. FLUSH Allows a flat cut with the same cutting capacities. The edge of the wire is cut off flat. Thanks to faster penetration into the component the operator s effort is substantially reduced. No solder spikes after using wave soldering process. SUPER FULL FLUSH An Erem eclusive. This absolute full flush cut leaves a perfect flat surface on cut leads. It prevents any pinching of leads. Flat, clean cut. No cutting rework after soldering. Soft wires only Erem Cut 2. Others SIZE 4.33" (110 mm) Small short head for increased cutting resistance. For almost all cutting applications. 4.5" (115 mm) Longer and finer head. For cutting applications where easy access is more important than a high cutting capacity. 4.75" (120 mm) Strong version. For all cutting applications where high cutting capacity is required

17 SIDE CUTTERS OVAL HEAD OVAL HEAD Main application: standard cutting applications. LENGTH 4.33" (110 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 612N 4.33" 0.35" 0.35" 0.24" ø 0.05" 1.69 oz. Semi-flush cut, high grade tool steel, (110 mm) (9 mm) (9 mm) (6 mm) (1.25 mm) (48 g) burnished, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. 622N 4.33" 0.35" 0.35" 0.24" ø 0.05" 1.69 oz. Flush cut, high grade tool steel, anti-glare 622NV (110 mm) (9 mm) (9 mm) (6 mm) (1.25 mm) (48 g) finish, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. 622NV same as 622N but carded. 632N 4.33" 0.35" 0.35" 0.24" ø 0.05" 1.69 oz. Super full flush cut, high grade tool steel, 632NW (110 mm) (9 mm) (9 mm) (6 mm) (1.25 mm) (48 g) anti-glare finish, ESD safe, resharpenable Miniature side cutter. Economical line. Small head. Perfect full flush cut. Soft wires only. 632NW same as 632N but with wire catcher E622N 4.33" 0.35" 0.35" 0.24" ø 0.05" 1.69 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (9 mm) (9 mm) (6 mm) (1.25 mm) (48 g) finish, ESD safe, resharpenable Miniature side cutter. Small head. Same as 622N but with Ergonomic Grips. LENGTH 4.5" (115 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 512N 4.5" 0.39" 0.41" 0.26" ø 0.06" 2.36 oz. Semi-flush cut, high grade tool steel, anti-glare 512NV (115 mm) (10 mm) (10.5 mm) (6.5 mm) (1.6 mm) (67 g) finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Economical line. 512NV same as 512N but carded. cooperhandtools.com/erem 17 17

18 SIDE CUTTERS OVAL HEAD LENGTH 4.5" (115 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 599TFO 4.5" 0.59" 0.41" 0.26" * ask for 2.36 oz. Semi-flush cut, Tungsten Carbide blades, (115 mm) (15 mm) (10.5 mm) (6.5 mm) cutting cap. (67 g) anti-glare finish, ESD safe Miniature side cutter. Small head. 522N 4.5" 0.39" 0.41" 0.26" ø 0.06" 2.36 oz. Flush cut, high grade tool steel, anti-glare 522NV (115 mm) (10 mm) (10.5 mm) (6.5 mm) (1.6 mm) (67 g) finish, ESD safe, resharpenable Side cutter for universal use. Medium size. 522NV same as 522N but carded. 532N 4.5" 0.39" 0.41" 0.26" ø 0.06" 2.36 oz. Super full flush cut, high grade tool steel, (115 mm) (10 mm) (10.5 mm) (6.5 mm) (1.6 mm) (67 g) anti-glare finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Perfect full flush cut. Soft wires only. * Please provide wire sample. LENGTH 4.75" (120 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 812N 4.75" 0.59" 0.53" 0.30" ø 0.07" 3.00 oz. Semi-flush cut, high grade tool steel, anti-glare (120 mm) (15 mm) (13.5 mm) (7.5 mm) (1.8 mm) (85 g) finish, ESD safe, resharpenable Side cutter for large wires. Economical line. 822N 4.75" 0.59" 0.53" 0.30" ø 0.07" 3.00 oz. Flush cut, high grade tool steel, anti-glare (120 mm) (15 mm) (13.5 mm) (7.5 mm) (1.8 mm) (85 g) finish, ESD safe, resharpenable Side cutter for large wires. Economical line. TAPERED HEAD TAPERED HEAD Main application: cutting applications where easy access is required. LENGTH 4.33" (110 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 622NA 4.33" 0.35" 0.35" 0.24" ø 0.04" 1.69 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (9 mm) (9 mm) (6 mm) (1.0 mm) (48 g) finish, ESD safe, resharpenable Miniature side cutter. Small tapered head allows very good access. Economical line

19 SIDE CUTTERS TAPERED HEAD LENGTH 4.5" (115 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 595T 4.5" 0.47" 0.41" 0.26" * ask for 2.36 oz. Semi-flush cut, Tungsten Carbide blades, (115 mm) (12 mm) (10.5 mm) (6.5 mm) cutting cap. (67 g) anti-glare finish, ESD safe Side cutter with Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires. Ask for special application. 595E 4.5" 0.35" 0.41" 0.26" ø 0.05" 2.36 oz. Flush cut, high grade tool steel, anti-glare (115 mm) (9 mm) (10.5 mm) (6.5 mm) (1.2 mm) (67 g) finish, ESD safe, resharpenable Side cutter for universal use. Medium size. E595E 4.5" 0.35" 0.41" 0.26" ø 0.05" 2.36 oz. Flush cut, high grade tool steel, anti-glare (Not Shown) (115 mm) (9 mm) (10.5 mm) (6.5 mm) (1.2 mm) (67 g) finish, ESD safe, resharpenable Side cutter for universal use. Medium size. Same as 595E but with Ergonomic Grips. * Please provide wire sample. LENGTH 5.5" (140 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 2222EA 5.5" 0.39" 0.39" 0.23" ø 0.04" 2.47 oz. Flush cut, high grade tool steel, anti-glare (140 mm) (10 mm) (10 mm) (5.8 mm) (1.0 mm) (70 g) finish, ESD safe, resharpenable, ergonomic Ergonomic side cutter for universal use. Tapered head for easier access. RELIEVED HEAD RELIEVED HEAD LENGTH 4.33" (110 MM) Main application: cutting applications in confined areas. MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 622NB 4.33" 0.35" 0.35" 0.24" ø 0.03" 1.69 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (9 mm) (9 mm) (6 mm) (0.8 mm) (48 g) finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. Economical line. E622NB 4.33" 0.35" 0.35" 0.24" ø 0.03" 1.69 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (9 mm) (9 mm) (6 mm) (0.8 mm) (48 g) finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. Economical line. Same as 662NB but with ergonomic grips. cooperhandtools.com/erem 19 19

20 SIDE CUTTERS RELIEVED HEAD LENGTH 4.33" (110 MM) * Please provide wire sample. MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 776E 4.33" 0.35" 0.35" 0.24" ø 0.04" 1.69 oz. Super full flush cut, high grade tool steel, (110 mm) (9 mm) (9 mm) (6 mm) (1.0 mm) (48 g) anti-glare finish, ESD safe, resharpenable Miniature side cutter. Super fine relieved head allows very good access. Soft wires only. 777E 4.33" 0.35" 0.35" 0.24" ø 0.04" 1.69 oz. Super full flush cut, high grade tool steel, (110 mm) (9 mm) (9 mm) (6 mm) (1.0 mm) (48 g) anti-glare finish, ESD safe, resharpenable Small tapered head for cutting in limited access areas. Perfect full flush cut. Soft wires only. 632NCF 4.33" 0.35" 0.35" 0.24" * ask for 1.69 oz. Super full flush cut, high grade tool steel, (110 mm) (9 mm) (9 mm) (6 mm) cutting cap. (48 g) anti-glare finish, ESD safe, soft materials only Miniature side cutter. Special fine, high precision cut eclusively designed for soft materials like small Silicone tubing in medical applications, precision connector sealing, miniature rubber gaskets or cutting of molded soft synthetic parts. Super fine relieved head allows very good access. M L LENGTH 4.5" (115 MM) S M L Mu L 13 9 Mu L 13 Semi Flush SF Flush F Super Full Flush FF MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 592E 4.5" 0.47" 0.41" 0.26" ø 0.02" 2.36 oz. Flush cut, high grade tool steel, anti-glare finish, (115 mm) (12 mm) (10.5 mm) (6.5 mm) (0.6 mm) (67 g) ESD safe, resharpenable FORM 1 2 Side cutter with relieved head. Medium size. For Copper wires. 576TX 4.5" 0.43" 0.41" 0.26" * ask for 2.36 oz. Flush cut, Tungsten Carbide blades, anti-glare (115 mm) (11 mm) (10.5 mm) (6.5 mm) cutting cap. (67 g) ESD safe Miniature side cutter. Super fine relieved head allows very good access. Tungsten Carbide blades for consistent quality cuts. Resistant to small stainless steel wires. 576TX1 4.5" 0.51" 0.41" 0.26" ø 0.02" 2.36 oz. Flush cut, Tungsten Carbide blades, anti-glare (115 mm) (13 mm) (10.5 mm) (6.5 mm) (1.0 mm) (67 g) ESD safe 3 4 FORM 1 2 Similar to 576TX but with rounded tips. Designed specifically for cutting MP35N stainless steel wire. Medical device manufacturing applications. Tungsten carbide blades for consistent quality cuts. 792E 4.5" 0.51" 0.41" 0.26" ø 0.02" 2.36 oz. Super full flush cut, high grade tool steel, (115 mm) (13 mm) (10.5 mm) (6.5 mm) (1.0 mm) (67 g) anti-glare finish, ESD safe, resharpenable 3 4 Side cutter with relieved head. Medium size. For fine soft wires. * Please provide wire sample. LENGTH 5.5" (140 MM) Semi Flush SF Flush F Super Full Flush FF MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 2222EB 5.5" 0.39" 0.39" 0.23" ø 0.04" 2.47 oz. Flush cut, high grade tool steel, anti-glare (140 mm) (10 mm) (10 mm) (5.8 mm) (1.0 mm) (70 g) finish, ESD safe, resharpenable, ergonomic Ergonomic side cutter for universal use. Tapered relieved head for working in confined areas

21 SIDE CUTTERS SPECIALS LENGTH 5.25" (133 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 147A 5.25" 0.47" 0.41" 0.30" ø 0.08" 3.53oz. Semi-flush cut, high grade tool steel, anti-glare (133 mm) (12 mm) (10.5 mm) (7.5 mm) (2.0 mm) (100 g) finish, ESD safe, compound action Diagonal compound action side cutter. Easy cutting for hard wires. 3.5 times less force needed than with conventional cutters. High cutting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm. 147B 5.25" 0.47" 0.41" 0.30" ø 0.08" 3.53oz. Semi-flush cut, high grade tool steel, anti-glare (Not Shown) (133 mm) (12 mm) (10.5 mm) (7.5 mm) (2.0 mm) (100 g) finish, ESD safe, compound action Transverse compound action side cutter. Easy cutting for hard wires. 3.5 times less force needed than with conventional cutters. High cutting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm. Flush cut on request. ERGONOMIC HANDLES * TAPERED HEAD Main application: Constant production cutting applications. LENGTH 5.5" (140 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 2212E 5.5" 0.39" 0.39" 0.23" ø 0.05" 2.47 oz. Semi-flush cut, high grade tool steel, anti-glare (140 mm) (10 mm) (10 mm) (5.8 mm) (1.25 mm) (70 g) finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. 2222E 5.5" 0.39" 0.39" 0.23" ø 0.05" 2.47 oz. Flush cut, high grade tool steel, anti-glare (140 mm) (10 mm) (10 mm) (5.8 mm) (1.25 mm) (70 g) finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for universal use. 2232E 5.5" 0.39" 0.39" 0.23" ø 0.05" 2.47 oz. Super full flush cut, high grade tool steel, anti-glare (140 mm) (10 mm) (10 mm) (5.8 mm) (1.25 mm) (70 g) finish, ESD safe, resharpenable, Ergonomic Ergonomic side cutter for fine and soft wires. *Ergonomic features see page 13 cooperhandtools.com/erem 21 21

22 TIP CUTTERS TIP CUTTER ATTRIBUTES TIP CUTTERS Erem offers the largest variety of high precision tip cutters. All edges have fine radiuses to avoid board damaging. To find the cutter for your demand just follow the steps below: BLADE PROTECTION EREM BLADE PROTECTION All tip cutters have an anti-overbite system which prevents blades from overlapping. HEAD FORM ANGLED For standard tip cutting applications. ANGLED NARROW For applications in confined areas. Longer but narrow head for better reach between parts and into areas with limited access. STRAIGHT For vertical or horizontal tip cutting applications. CUT SEMI-FLUSH These blades allow a very high resistance. Will cut malleable wires like Copper as well as hard wires. Leaves a pinch at the end of the wire. FLUSH Allow a flat cut with high cutting capacities. The edge of the wire is cut off almost squarely. Guaranteed precision even after constant usage. Thanks to faster penetration into the component the operator s effort is substantially reduced Erem Cut 2. Others SIZE 4.33" (110 mm) Small short head for increased cutting resistance. For almost all cutting applications. 4.5" (115 mm) Longer and finer head. For cutting applications where easy access is more important than a high cutting capacity. 4.75" (120 mm) Strong version. For all cutting applications where high cutting capacity is required

23 TIP CUTTERS ANGLED HEAD ANGLED HEAD Main application: for standard tip cutting applications. LENGTH 4.33" (110 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 503ET 4.33" 0.47" 0.41" 0.26" 0.39" * ask for 2.36 oz. <) 30, semi flush cut, Tungsten Carbide, (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) cutting (67 g) anti-glare finish, ESD safe Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires. 503E 4.33" 0.47" 0.41" 0.26" 0.39" ø 0.05" 2.36 oz. <) 30, flush cut, high grade tool steel, (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) (1.2 mm) (67 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Standard size. For universal use. 504AE 4.33" 0.47" 0.41" 0.26" 0.39" ø 0.05" 2.36 oz. <) 30, flush cut, high grade tool steel, (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) (1.2 mm) (67 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Standard size. Rounded head. For universal use. 503ETF 4.33" 0.47" 0.41" 0.26" 0.39" * ask for 2.36 oz. <) 30, flush cut, Tungsten Carbide blades, (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) cutting (67 g) anti-glare finish, ESD safe Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires. 503ETST 4.33" 0.47" 0.41" 0.26" 0.39" * ask for 2.36 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) cutting (67 g) finish, ESD safe, resharpenable Angled tip cutter with finely honed tungsten carbide blades. Super full-flush cut. E503ETST 4.33" 0.47" 0.41" 0.26" 0.39" * ask for 2.36 oz. Flush cut, high grade tool steel, anti-glare (110 mm) (12 mm) (10.5 mm) (6.5 mm) (10 mm) cutting (67 g) finish, ESD safe, resharpenable capability capability capability capability Angled tip cutter with finely honed tungsten carbide blades. Super full-flush cut. Ergonomic handles. * Please provide wire sample. cooperhandtools.com/erem 23 23

24 TIP CUTTERS ANGLED HEAD SMALL ANGLED HEAD SMALL Main applications: for applications in confined areas. LENGTH 4.33" (110 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 575E 4.33" 0.59" 0.41" 0.26" 0.39" ø 0.02" 2.36 oz. <) 45, flush cut, high grade tool steel, (110 mm) (15 mm) (10.5 mm) (6.5 mm) (10 mm) (0.6 mm) (67 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Small size. For delicate work on hybrid circuits or micro modules. 578E 4.33" 0.59" 0.41" 0.26" 0.39" ø 0.02" 2.36 oz. <) 45, flush cut, high grade tool steel, (Not Shown) (110 mm) (15 mm) (10.5 mm) (6.5 mm) (10 mm) (0.6 mm) (67 g) anti-glare finish, ESD safe, resharpenable Oblique angled tip cutter allows for maimum visibility. LENGTH 4.5" (115 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 572E 4.5" 0.71" 0.41" 0.26" 0.26" ø 0.02" 2.40 oz. <) 40, flush cut, high grade tool steel, (115 mm) (18 mm) (10.5 mm) (6.5 mm) (6.5 mm) (0.6 mm) (68 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Medium size. Relieved jaws for easier access. 593AE 4.5" 0.79" 0.41" 0.26" 0.26" ø 0.04" 2.40 oz. <) 50, flush cut, high grade tool steel, (115 mm) (20 mm) (10.5 mm) (6.5 mm) (6.5 mm) (1.0 mm) (68 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Cuts easily DIL leads from the rear. Cuts pins on dense PCB. Ideal maintenance tool. 582E 4.5" 0.75" 0.41" 0.26" 0.26" ø 0.04" 2.40 oz. <) 45, flush cut, high grade tool steel, (115 mm) (19 mm) (10.5 mm) (6.5 mm) (6.5 mm) (1.0 mm) (68 g) anti-glare finish, ESD safe, resharpenable Tip cutter. Medium size. A must when working on PCB s, cutting component leads. Also ideal for rework

25 TIP CUTTERS STRAIGHT TAPERED HEAD ANGLED HEAD SMALL Main applications: for horizontal use and easier access. LENGTH 4.33" (110 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 670EP 4.33" 0.39" 0.35" 0.24" 0.08" ø 0.01" 1.69 oz. Vertical tip cutter, flush cut, high grade tool (110 mm) (10 mm) (9 mm) (6 mm) (2 mm) (0.25 mm) (48 g) steel, anti-glare finish, ESD safe, resharpenable Miniature tip cutter. High precision SMD lead cutting. Micro-packages up to 0.25 fine pitches before desoldering. No breakage guarantee. For µ-pitches under 0,5 mm use 670 EPF LENGTH 4.75" (120 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 570E 4.75" 0.87" 0.35" 0.26" 0.16" ø 0.02" 2.36 oz. Flush cut, high grade tool steel, anti-glare finish, (120 mm) (22 mm) (9 mm) (6.5 mm) (4 mm) (0.6 mm) (67 g) ESD safe, resharpenable Tip cutter for horizontal or vertical tip cutting. For cutting at etreme tips. cooperhandtools.com/erem 25 25

26 TIP CUTTERS STRAIGHT HEAD STRAIGHT HEAD Main applications: for vertical use. LENGTH 4.75" (120 MM) MODEL L A B C D MAX. Cu WGT. DESCRIPTION 573E 4.75" 0.91" 0.35" 0.26" 0.14" ø 0.02" 2.36 oz. Vertical, flush cut, high grade tool steel, (120 mm) (23 mm) (9 mm) (6.5 mm) (3.5 mm) (0.6 mm) (67 g) anti-glare finish, ESD safe, resharpenable Tip cutter for vertical tip cutting. For fine wires. ANGLED HEAD SMALL ERGONOMIC HANDLES * ANGLED HEAD SMALL LENGTH 5.5" (140 MM) *Ergonomic features see page 13 MODEL L A B C D MAX. Cu WGT. DESCRIPTION 2282E 5.5" 0.79" 0.39" 0.23" 0.28" ø 0.04" 2.47 oz. <) 45, flush cut, high grade tool steel, anti-glare (140 mm) (20 mm) (10 mm) (5.8 mm) (7 mm) (1.0 mm) (70 g) finish, ESD safe, resharpenable, ergonomic Ergonomic tip cutter. Medium size. Ideal for working on PCB s or cutting component leads

27 PNEUMATIC CUTTERS HOUSING SIDE AND TIP The Erem 1500BSF is a small lightweight air tool that can be fitted with a range of cutter heads making this tool etremely versatile. It is suitable for the cropping of conventional components, as well as small ductile or plastic parts. MODEL D L WEIGHT DESCRIPTION 1500BSF 1.10" (28 mm) 5.12" (130 MM) 4.59 oz/130 g Manual air tool (w/o head) Small precise pneumatic cutter housing. Improved lifetime and reliability. Easy interchangeable cutting heads. Requires 4-6 bar oil-free, clean compressed air. New economical version. CUTTING HEADS FOR 1500BSF SIDE CUTTERS OVAL HEAD MODEL A B C MAX. Cu WEIGHT DESCRIPTION 1522N 0.39" 0.41" 0.26" ø 0.06" 1.23 oz. Flush cut, high grade tool steel, anti-glare finish, (10 mm) (10.5 mm) (6.5 mm) (1.6 mm) (35 g) resharpenable Side cutter for universal use. Medium size. Economical line. Improved lifetime. SIDE CUTTERS TAPERED HEAD MODEL A B C MAX. Cu WEIGHT DESCRIPTION 1522NA 0.35" 0.41" 0.26" ø 0.06" 1.23 oz. Flush cut, high grade tool steel, anti-glare finish, (9 mm) (10.5 mm) (6.5 mm) (1.4 mm) (35 g) resharpenable Side cutter for easier access. Medium size. Economical line. Improved lifetime. cooperhandtools.com/erem 27 27

28 PNEUMATIC SIDE AND TIP CUTTERS CUTTING HEADS FOR 1500BSF SIDE CUTTERS RELIEVED HEAD MODEL A B C MAX. Cu WEIGHT DESCRIPTION 1522NB 0.35" 0.41" 0.26" ø 0.05" 1.23 oz. Flush cut, high grade tool steel, anti-glare finish, (9 mm) (10.5 mm) (6.5 mm) (1.2 mm) (35 g) resharpenable Side cutter for confined areas. Medium size. Economical line. Improved lifetime. TIP CUTTERS ANGLED HEAD MODEL A B C D MAX. Cu WEIGHT DESCRIPTION 1503E 0.47" 0.41" 0.26" 0.35" ø 0.05" 1.34 oz. <) 30, flush cut, high grade tool steel, (12 mm) (10.5 mm) (6.5 mm) (9 mm) (1.2 mm) (38 g) anti-glare finish, resharpenable Tip cutter. Small size. For universal use. 2697EPC 0.47" 0.575" 0.26" 0.24" ø 0.05" 1.69 oz. Flush cut, high grade tool steel, anti-glare (12 mm) (15 mm) (6.5 mm) (6 mm) (1.25 mm) (48 g) finish, ESD safe, resharpenable Diagonal tapered relieved head for PCB depaneling

29 DISTANCE CUTTERS DISTANCE CUTTERS DISTANCE CUTTERS Erem distance cutters are available with fied or adjustable cutting distance. The tips are brightly polished to avoid board damage E MODEL L A E F MAX. Cu WEIGHT DESCRIPTION 530E " 0.79" 0.12" 0.030" ø 0.05" 2.36 oz. Flush cut, high grade tool steel, polished (120 mm) (20 mm) (3 mm) (0.8 mm) (1.2 mm) (67 g) tips, ESD safe Distance cutter. Cuts the lead to a predetermined length of 0.8 mm. Reduces mechanical shock on components. 530E " 0.79" 0.12" 0.04" ø 0.05" 2.36 oz. Flush cut, high grade tool steel, polished (120 mm) (20 mm) (3 mm) (1.0 mm) (1.2 mm) (67 g) tips, ESD safe Distance cutter. Cuts the lead to a predetermined length of 1.0 mm. Reduces mechanical shock on components. 549E 4.5" 0.79" 0.12" 0.06" ø 0.05" 2.36 oz. 45, flush cut, high grade tool steel, polished (115 mm) (20 mm) (3 mm) (1.5 mm) (1.2 mm) (67 g) tips, ESD safe (Standard) Distance cutter. Cuts the lead to a predetermined length of 1.5 mm. Reduces mechanical shock on components. cooperhandtools.com/erem 29 29

30 MISCELLANEOUS PLIERS PLIERS PLIERS Erem offers a range of pliers with standard and ergonomic handles. ROUND NOSE LENGTH 4.75" (120 MM) MODEL L A B C E ø G WGT. DESCRIPTION " 0.91" 0.35" 0.26" ø 0.03" 0.04" 2.36 oz. High grade tool steel, anti-glare finish, ESD safe (120 mm) (23 mm) (9 mm) (6.5 mm) (0.8 mm) (1 mm) (67 g) Round nose pliers with smooth jaws, very precise. FLAT NOSE LENGTH 4.92" (125 MM) MODEL L A B C E G WGT. DESCRIPTION " 0.91" 0.35" 0.26" 0.20" 0.12" 2.36 oz. High grade tool steel/nylon, anti-glare finish, (125 mm) (23 mm) (9 mm) (6.5 mm) (5 mm) (3 mm) (67 g) ESD safe Flat nose pliers with replaceable Nylon inserts to prevent nicking e.g. for straightening precious metal, leads, etc. CHAIN NOSE LENGTH 4.75" (120 MM) AND 4.92" (125 MM) MODEL L A B C E G WGT. DESCRIPTION " 0.91" 0.35" 0.26" 0.04" 0.04" 2.36 oz. High grade tool steel, anti-glare finish, ESD safe (120 mm) (23 mm) (9 mm) (6.5 mm) (1 mm) (1 mm) (67 g) Chain nose pliers with smooth jaws. 544D 4.92" 0.91" 0.35" 0.26" 0.04" 0.04" 2.36 oz. High grade tool steel, anti-glare finish, ESD safe (125 mm) (23 mm) (9 mm) (6.5 mm) (1 mm) (1 mm) (67 g) Chain nose pliers with inside serrated jaws

31 MISCELLANEOUS PLIERS ERGONOMIC HANDLES * NEEDLE NOSE LENGTH 6.5" (165 MM) MODEL L A B C E G WGT. DESCRIPTION 2211P 6.5" 1.38" 0.39" 0.23" 0.04" 0.04" 2.82 oz. High grade tool steel, anti-glare finish, ESD safe, (165 mm) (35 mm) (10 mm) (5.8 mm) (1 mm) (1 mm) (80 g) Ergonomic Ergonomic needle nose pliers with smooth jaws. 2211PD 6.5" 1.38" 0.39" 0.23" 0.04" 0.04" 2.82 oz. High grade tool steel, anti-glare finish, ESD safe, (165 mm) (35 mm) (10 mm) (5.8 mm) (1 mm) (1 mm) (80 g) Ergonomic Ergonomic needle nose pliers with serrations. FLAT NOSE LENGTH 6.3" (160 MM) MODEL L A B C E G WGT. DESCRIPTION " 1.3" 0.39" 0.23" 0.14" 0.05" 2.82 oz. High grade tool steel, anti-glare finish, ESD safe, (160 mm) (33 mm) (10 mm) (5.8 mm) (3.5 mm) (1.5 mm) (80 g) Ergonomic Ergonomic flat nose pliers with long smooth jaws. Precise radiused edges. *Ergonomic features see page 13 cooperhandtools.com/erem 31 31

32 STRIPPING TOOLS FRONT STRIPPING LENGTH 4.75" (120 MM) HIGH PRECISION Erem stripping tools are the most precise tools used in the electronic or aviation field. They are manufactured from high grade tool steel to ensure durability. To ensure that you have the correct tool for your application, send us samples of your wire and we will make recommendations. MODEL L A E G H WIRE ø WGT. DESCRIPTION 510AE 4.75" 0.82" 0.19" 0.15" 0.27" " 2.65 oz. High grade tool steel, anti-glare finish, ESD safe (120 mm) (22 mm) (9 mm) (6.5 mm) (4 mm) ( (75 g) 1.02 mm) Front stripping tool. Adjustable for different diameters. (AWG 30-18) Diameter adjustable with screw. With interchangeable side cutting blade. For all kind of insulation and fiber optic outer jackets. SIDE STRIPPING LENGTH 4.75" (120 MM) MODEL L A E F G H WIRE ø WGT. DESCRIPTION 552S 4.75" 0.82" 0.25" 0.26" 0.43" 0.35" " 2.82 oz. High grade tool steel, anti-glare finish, ESD safe, (120 (21 (6.5 (6.7 (11 (9 ( (80 g) high precision mm) mm) mm) mm) mm) mm) 0.25 mm) Side stripping tool. Strips one size at a time without (AWG 42-30) scratching the cores. For all kind of insulation, Teflon, Tefzel, fiber optics or stranded wires. Diameter adjustable with screw plus screw stop. Replaceable cutting blades. Supplied with screwdriver and he key. Stripping range AWG. LENGTH 4.75" (120 MM) MODEL L A E F G H WIRE ø WGT. DESCRIPTION 502E " 0.86" 0.11" 0.24" 0.09" 0.19" 0.01" 2.36 oz. High grade tool steel, anti-glare finish, ESD safe (120 (21 (6.5 (6.7 (11 (9 (0.25 mm) (67 g) mm) mm) mm) mm) mm) mm) (AWG 30) Combination side stripping tool. Fine replaceable cutting blades. Strips resistant insulations such as Teflon, Tefzel, glass reinforced Fluoropolymere. This tool combines stripping, cutting and bending/gripping. For one specific wire diameter, AWG 30 (0.25 mm). Other diameters on request

33 PRE-FORMING TOOLS FOR PASSIVE COMPONENTS LENGTH 4.75" (120 MM) MODEL L A D E F WEIGHT DESCRIPTION 554A 4.75" 0.90" 0.22" 0.15" 0.17" 2.47 oz. High grade tool steel, anti-glare finish, (120 mm) (23 mm) (5.6 mm) (4 mm) (4.5 mm) (70 g) ESD safe Bending pliers for component leads, etc. U-shape. Aial forming action. Ma. lead ø: Diodes: 0,65 mm; Capacitors: 0,7 mm; Resistors: 1/2 W LENGTH 4.75" (120 MM) MODEL L A - E F WEIGHT DESCRIPTION " 0.90" " 0.11" 2.36 oz. High grade tool steel, anti-glare finish, (120 mm) (23 mm) - (4 mm) (3 mm) (67 g) ESD safe, cut + bend Bending pliers. Cuts and bends leads of popular radial components to a specific length. Ma. lead ø: Diodes: 0,65 mm; Capacitors: 0,7 mm; Resistors: 1/2 W cooperhandtools.com/erem 33 33

34 FIBER OPTIC TOOLS SIDE STRIPPING FIBER OPTIC TOOLS High precision tools for working on fiber optics. SIDE STRIPPING LENGTH 4.75" (120 MM) MODEL L A E F G H WIRE ø WGT. DESCRIPTION 552S 4.75" 0.82" 0.25" 0.26" 0.43" 0.35" " 2.82 oz. High grade tool steel, anti-glare finish, ESD safe, (120 (21 (6.5 (6.7 (11 (9 ( (80 g) high precision mm) mm) mm) mm) mm) mm) 0.25 mm) Side stripping tool. Strips one size at a time without (AWG 42-30) scratching the cores. For all kind of insulation, Teflon, Tefzel, fiber optics or stranded wires. Diameter adjustable with screw plus screw stop. Replaceable cutting blades. Supplied with screwdriver and he key. Stripping range AWG. CUTTING LENGTH 4.5" (115 MM) MODEL L A B C MAX. Cu WEIGHT DESCRIPTION 599TFO 4.5" 0.59" 0.41" 0.26" * ask for 2.36 oz. Semi-flush cut, Tungsten Carbide blades, (115 mm) (15 mm) (10.5 mm) (6.5 mm) cutting cap. (67 g) anti-glare finish, ESD safe Miniature side cutter. Small head. * Please provide wire sample. HOLDING / GRIPPING LENGTH 5.12" (130 MM) 249SA 5.12" (130 mm) 0.71 oz/20 g Special stainless steel / PPS, anti-glare finish, nonmagnetic ESD safe, suitable for fiber optics Precision tweezers with serrated grips and synthetic tips (PPS). Heat resistant up to 250 C (480 F). Resistant to acids and solder. Waterproof, ESD safe. Does not damage fiber optic cores

35 INDEX Model # Page Model # Page Model # Page Model # Page N ACA A B BSF E N NB AGS AGW SA...6 1SASL P PD E E EA EB E E SA...6, 34 24SA SA EPC SA...6 2ASA...9 2ASARU...9 2ASASL...9 2SA...7 3CSA...5 3CSASL...5 3SA...6 3SASL SA E E ET ETF ETST AE AE N NV SA N NV E E N D E S...32, A E E E TX TX E E E AE E T TFO...18, 34 5ASA...7 5ASASL...7 5SA...7 5SASL N N NA NB NV N NCF NW ASA EP E E E SA...8 7SASL N...18 AASA...6 ACSA...5 AM...6 E15AGW...10 E2ASA...10 E3CSA...10 E3SA...10 E503ETST...23 E595E...19 E5SA...10 E622N...17 E622NB...19 E7SA...10 EOODSA...10 EOOSA...10 EROP2ASA...9 EROP2ASAV...9 EROP3CSA...5 EROP3CSAV...5 EROP3SA...6 EROP5ASA...7 EROP5SA...7 EROP5SAV...7 EROP7SA...8 EROPAASA...6 EROPOODSA...6 EROPOOSA...6 M5S...5 OODSA...6 OOSA...6 2SASL E N...18

36 CHT /MW-?????/25M/PRINTED 9/05/USA COOPER NO , Cooper Industries, Inc. Specifications subject to change without notice.