B&S Pliers* decades of experience in your hand
|
|
- Donna Wilcox
- 7 years ago
- Views:
Transcription
1 &S Pliers* decades of experience in your hand 4 Unique design Developed by &S, functional and protected worldwide. 10 years warranty (except cutting pliers and spring hinge plier no ) Solid and durable. Reliable quality Forged joint, precise manufacturing, highly durable plastic jaws. You will fi nd our Plasti Dip on page E 22 and E 23. You will fi nd our practical shrinking tubes for plier handles on page 40. * Not suitable for medical applications
2 Standard Pliers proven a million times over 5 Robust design Ideal for people who prefer working with heavier tools. Long handles For optimum leverage with a minimum use of force. Textured surface Provides a safe grip, prevents slipping. Pliers the ultra-light alternative Handy size Also suitable for smaller hands. Lighter Light pliers for less effort. Very secure grip Asymmetrical ends and textured grip to prevent slipping.
3 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Inclination Pliers conical 8 mm To adjust metal hinges, one side with nylon jaw, conical jaw: Ø 6:1,5 mm. Inclination Pliers conical 6 mm To adjust metal hinges, for delicate frames, one side with extremely thin flat nylon jaw, conical jaw: Ø 6:1,5 mm N N mm 100 g 148 mm 100 g Replacement plastic jaw: Replacement plastic jaw:
4 7 Inclination Pliers Cylindrical 8 mm Especially designed for nylon frames, extremely thin cylindrical metal pin, other jaw is covered with nylon. Holding Pliers 10 mm With plastic jaws, jaw mouth remains in parallel position up to approx. 3 mm N N mm 100 g Replacement plastic jaw: Replacement plastic jaws: pair
5 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Holding Pliers 8 mm With plastic jaws. Holding Pliers 6 mm With plastic jaws, mouth remains in parallel position at a gap of approx. 3 mm N N mm 100 g 148 mm 100 g Replacement plastic jaws: Replacement plastic jaws: pair pair
6 9 Nylon Eyewire Shaper 24 mm With plastic jaws, large version. Nylon Eyewire Shaper 19 mm With plastic jaws, small version N N 145 mm 140 g mm 110 g Replacement plastic jaws: Replacement plastic jaws: pair pair
7 Tips & Tricks 10 ending Plier with 3 Rollers One Plier for Many Applications! ending Pliers with 3 Rollers No N, approx. 1 2 minutes This is how it works To adjust the temples eyewire bridge temple ends lens shape 4 5
8 150 mm mm 50 mm 0 mm ending Pliers with 3 Rollers For various purposes: to adjust spectacles, bridges, temples and temple tips N mm 95 g Replacement plastic jaws: set
9 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Nylon Eyewire Shaper One plastic jaw (19 mm), one plastic jaw (7 mm). Perfect to adjust bridges. Nylon Eyewire Shaper One plastic jaw (15 mm), one plastic jaw (12 mm). Perfect to adjust bridges N 145 mm 140 g N 145 mm 140 g mm 100 g Replacement plastic jaws: Replacement plastic jaws: pair pair
10 You will fi nd our Plasti Dip on page E 22 and E 23. You will fi nd our shrinking tubes on page F Trident Pliers For precise and easy adjustment of clip-on bridges. ending Pliers ased on the trident pliers concept. This plier is particularly suitable for a careful adjustment of softer materials. The plastic jaw prevents scratches. The thorn can additionally be padded by a shrinking tube or Plastic Dip N 140 mm 140 g N mm 100 g 140 mm 140 g 137 mm 90 g Replacement plastic jaw:
11 smaller, lighter and with matt finish 14 Flat Snipe Nose Pliers Extra Long Flat inner jaws. Extra long and thin version. Flat Snipe Nose Pliers Semi-circular jaws N 155 mm 140 g N mm 100 g 148 mm 100 g
12 150 mm mm 50 mm 0 mm Round Snipe Nose Pliers Round jaws. Flat Semicircular Snipe Nose Pliers One round jaw, one semi-circular jaw N N mm 100 g
13 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Flat Nose Pliers 5 mm 5 mm width at tip. Flat Nose Pliers 3 mm 3 mm width at tip N N mm 95 g
14 17 Nose Pad Adjusting Pliers Push-in Nose Pads Especially for fitting push-in nose pads. Very delicate version to avoid touching the lens during fitting N Nose Pad Adjusting Pliers Screw-in Nose Pads For screw-in nose pads. Improved, a more delicate version to avoid touch ing the lens during fitting N mm 95 g 148 mm 95 g
15 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Nose Pad Removing Pliers For removal of push-in-type nose pads. Size Testing Pliers For testing lens size during the finishing process N N 145 mm 140 g mm 100 g 139 mm 95 g
16 19 Peening Pliers With screw on peening tip and point shaped sunken anvil to avoid marking the frame. Screw Cutter For cutting German Silver and brass screws on rimless frames. Not suitable for steel screws N N 130 mm 125 g mm 95 g Replacement peening tips: pieces
17 Tips & Tricks Pressing and Removing Plier for Rimless Frames 20 Compressing and Removing Sleeves is Easy and Simple! Pressing Plier with Rocker No N, Removing Plier No N, Lens Protection Shim Plate with Long Holes No Special Front Cutter for Plastic Sleeves No approx. 5 minutes This is how it works Compressing Inserting Cutting Placing Compressing Removing Cutting Removing 1 2 Switch the jaw Dismantling Turning Tighten 1 2 3
18 150 mm mm 50 mm 0 mm Pressing Pliers with Rocker For pressing in plastic sleeves on rimless frames such as Silhouette Minimal Art or similar models. With vertical and horizontal groove and rocker to balance the angle N Removing Pliers with Rotatable Jaws To remove plastic sleeves from the drill holes of rimless frames such as Silhouette Minimal Art or similar models. Rotatable jaw with vertical and horizontal pins N mm 95 g 148 mm 95 g Replacement plastic jaws: Replacement plastic jaws: pair pair
19 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Pressing Pliers For pressing in plastic sleeves on rimless frames such as Silhouette Minimal Art or similar models. With vertical and horizontal groove N 150 mm 145 g Pressing Pliers with O-ring For pressing in plastic sleeves on rimless frames such as Silhouette Minimal Art or similar models. With horizontal groove. Comparable to model no N, but is offered with a deeper groove and exchangeable rubber o-rings. Comes complete with 5 O-rings N mm 100 g 150 mm 145 g 145 mm 100 g Replacement plastic jaws: Replacement plastic jaws: pair pair Replacement O-ring pieces
20 23 Special Front Cutter for Plastic Sleeves For cutting plastic sleeves on frames such as Minimal Art from Silhouette. The narrow shape of the jaws and the filigree cutting edges reduce the danger of scratching the lenses. Not suitable to cut metal N 140 mm 140 g mm 95 g With plastic grip: mm 70 g
21 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Special Side Cutter for Plastic For cutting nylon liner near a drilled hole. The narrow shape of the jaws and the filigree cutting edges reduce the risk of scratching the lenses. Not suitable to cut metal. Special Pliers for Screwless Rimless Frames Pliers with two notches for easy disassembly of screwless frames such as Silhouette Minimal Art or similar models N 140 mm 140 g mm 40 g 137 mm 95 g
22 New kind of plier grip Your advantage at work from &S 25 etter haptic Comfortable working Rimless Frame Adjusting Pliers Specially for aligning rimless spectacles. Secure grip of the screws and nuts. You will fi nd our practical shrinking tubes for plier handles on page N 155 mm 140 g Replacement plastic jaw:
23 smaller, lighter and with matt finish 150 mm mm 50 mm 0 mm Hinge Setting or Angling Pliers With two concave indentations, parallel mouth gap at 1 mm. Width of mouth: 4.0 mm Hinge Adjusting Pliers To easily bend and adjust roll joint N N 148 mm 140 g 145 mm 140 g mm 90 g
24 27 Temple Adjusting Pliers One flat plastic jaw with three different grooves and one round plastic jaw with three different curves. Ideal to adjust all types of temples. The even distortion and constant pressure applied to the workpiece ensure a method of working which takes special care of the material. Temple Adjusting Pliers With two special plastic jaws, one convex and one concave, both jaws have crossgrooves vertical to the curves N N Replacement plastic jaws: Replacement plastic jaws: pair pair
25 28 Lens Aligner 32 mm Extra long jaws with straight ends, non-slip punched rubber discs. Fixed rubber jaw: Ø 32 mm (punched Ø 15 mm), flexible rubber jaw: Ø 26 mm, working clearance of jaws: 40 mm. Lens Aligner 20 mm Same as No N, but with two Ø 20 mm discs. Spring mechanism on the handle. Especially for small frames N N 200 mm 240 g 200 mm 240 g Replacement rubber discs: Replacement rubber discs: pair pair Replacement plate complete with spring:
26 150 mm mm 50 mm 0 mm Hinge Adjusting Pliers Width of mouth: 1.5 mm Chipping Pliers With exchangeable jaws, including replacement jaws N 148 mm 140 g N 145 mm 140 g Replacement jaws: pair
27 smaller, lighter and with matt finish 30 De-locking Pliers for NIDEK Special pliers for de-blocking the NIDEK lens block suitable for NIDEK Mini Cup and the approved P-Cup. De-locking Pliers for NIDEK Special pliers for de-blocking the NIDEK lens block suitable for NIDEK Mini Cup and the approved P-Cup N 148 mm 140 g mm 125 g Replacement jaws: pair
28 150 mm New kind of plier grip Your advantage at work from &S 31 etter haptic Comfortable working 100 mm 50 mm 0 mm De-locking Pliers For easy removal of lens blocks made of plastic or silicone, application vertical. You will fi nd our practical shrinking tubes for plier handles on page N 148 mm 140 g
29 Mark all your spectacle frames with your company logo. Type size is 1.5 mm, unless specified otherwise. If the frame requires a sign the proportions will be adjusted accordingly not the type. The maximum letter size is 2.0 mm. No more than 9 letters should be used for perfect print quality. 32 Calculation of the stamp price Use the order numbers below to determine the correct code for the number of characters. For example, if you would like to order the punch RO for the CLAVULUS, you will find under No This is only valid for letters that are DIN-Norm. Special signs engravings such as spectacle frames, a monocle, a logo or other styles of writing and decoration, which are different to the above example and depending on the grade of difficulty will be subject to a quotation. Calculation examples for inserts with 1.5 mm letter height: Examples of signs: K5 calculated as: R O MEIER Special signs such as 2 signs 3 signs 5 signs Stamp for Marking Pliers No sign Marking Pliers For marking spectacle frames. Inserts made to your request signs signs signs mm 280 g Stamp for CLAVULUS No (sold out) and (see also page A 46) sign signs signs
30 33 Side Cutter With double joint and inserted hard metal cutting blades, used for hard wire and steel screws up to 1.4 mm diameter. Double Joint Front Cutter With bevel, double joint and inserted hard metal cutting blades used for hard wire and steel screws up to 1.4 mm diameter N 180 mm 240 g N 170 mm 240 g
31 34 Front Cutter With inserted hard metal cutting blades for stainless steel screws up to 1.4 mm. Side Cutter With inserted hard metal cutting blades for steel wires up to 2.0 mm N 145 mm 140 g With plastic grip: mm 200 g
32 150 mm In case you use our side cutters with materials that are a greater diameter than is recommended, for example if you are cutting toughened steel, you risk breaking or damaging the side cutter. The cutting edges should if possible be used in the middle and not on the top or front edges mm 50 mm 0 mm Side Cutter With inserted hard metal cutting blades for stainless steel screws up to 1.4 mm. Side Cutter For steel screws up to a maximum of 1.6 mm, with plastic grip N 140 mm 140 g With plastic grip: mm 145 g
33 150 mm mm 50 mm 0 mm Side Cutter Larger version of the side cutter No For steel and titanium screws up to 1.4 mm. Side Cutter Extremely fine and pointed cutting surface for titanium and steel screws up to max. 1.2 mm. With plastic grip: mm 100 g With plastic grip: mm 75 g
34 Tips & Tricks Easy Mounting of Spring Hinges Make Spring Hinge Mounting a Piece of Cake! 37 Spring hinge pliers set No or separately: Spring Hinge Pliers No Hand Tool No Screw Driving Tweezer No Spare Pins No approx. 2 3 minutes This is how it works Option 1: Mounting with plier, tweezer and hand tool Attaching Stretching Holding Clamping Attaching Tighten, release the plier 5 6 Option 2: Mounting with pins, tweezer and hand tool Repeat step 1 3 Clamping Attaching Tighten, release the pin 4 5 6
35 38 Set of Spring Hinge Pliers The pliers clamp just the eyelet of the hinge. No scratching of the temple! The eyelet of the hinge is clamped and locked with the pliers or the pins. This simplifies the screw fitting. The handy clamping tool No , the pins No and the tweezer No are included. Easy Mounting of Spring Hinges (see page 37) Spring Hinge Pliers with Pins and Tool Screw Driving Tweezer Replacement tool Spare pins pieces
36 Pliers Stand Made in Germany, of beech wood with metal support for approx. 10 pliers, storage area with metal border. Compatible with Screwdriver-Set in wooden block With 4 screwdrivers, screwdriver blade 1.0; 1.4; 1.8 and 2.3 mm, plus 1 Phillips head screwdriver Size 2.0 mm 39 Contents not included! x 130 x 105 mm 960 g Pliers Stand Colour: Transparent Acrylic plastic, with 6 drill holes dia. 10 mm and 6 drill holes dia. 12 mm to store screw drivers etc. Contents not included! x 130 x 165 mm 700 g
37 40 Shrinking tubes for plier handles The shrinkable handle cover has a structured surface for better grip. oth ends are open, fits tight to the handles after shrinking. 8 cm 15 cm pairs (8 pieces) lack lue Red Green Assortment with all colours pairs (4 pairs each colour) Pliers Stand Stainless steel, to store approx. 10 pliers. With rubber feet to avoid scratches on the table top. Contents not included! x 100 x 110 mm 450 g Matching rubber rings Colour: lue pieces Pliers Stand Colour: Transparent Transparent acrylic plastic, to store approx. 10 pliers. Pliers stand comes unasssembled. Can easily be assembled without tools. Contents not included! x 112 x 125 mm 400 g Magnetic Tool ar ECO Contents not included! x 40 x 23 mm 375 g
38 &S Tool Case including Tools Handy kit ready to go! It contains the most useful pliers and spare parts for adjusting and refurbishing spectacles. Including the following tools: 1x , 1x , 1x , 1x , 1x , 1x , 1x , 1x , 1x , 1x accessory box with nose pads and screws x 150 x 50 mm 730 g &S Tool Caddy Plastic tool stand to store approx. 8 pliers and 6 screwdrivers. All important tools in one place! Additional function third hand stand and silicone pad as supporting area. Suitable for the screwdrivers , , and Including 4 exchangeable blades for the third hand in sizes 1.6; 1.8; +1.5 and Silikone pad ( ) and blades ( ) are available as spare parts x 210 x 190 mm 430 g Tool ag Small for elt Wear Practical tool bag to wear on a belt. To store pliers, pens, PD-rulers, etc x 175 x 10 mm 76 g
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationTechnique Guide. Screw Removal Set. Instruments for removing Synthes screws.
Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationStandard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationInstallation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)
Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More information$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationTrillium 40 Axis Spring Tensioner Wire Replacement Instructions
Trillium 40 Axis Spring Tensioner Wire Replacement Instructions 1 Overview The objective is to replace the broken axis spring tensioner wire. This requires the following tasks: 1. Remove the seismometer
More informationhttp://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
More informationusb flash drives with logo delivery within 3 days
usb flash drives with logo delivery within 3 days 2015 QUALITY We do our best to provide top quality products. We work with proven suppliers and carefully select our components. In addition, to make sure
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationPARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
More informationFREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationGripper Kit for the Boe-Bot Robot (#28202)
599 Menlo Drive, Suite 100 Rocklin, California 95765, USA Office: (916) 624-8333 Fax: (916) 624-8003 General: info@parallax.com Technical: support@parallax.com Web Site: www.parallax.com Educational: www.stampsinclass.com
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationDESS. Screws. Tijuana Ventas: (664) 685 6294/95 hirambogarin@dabocorp.com. For all major implant systems!! www.dabocorp.com
Screws Screws for definitive use. Made from medical grade 5 ELI Titanium Integrity and soundness guaranteed by stress tests of up to 150% of their nominal torques. Their designs ensure a perfect fit with
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationConnect. Cable preparation and cutting tools
Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range SensoPlus VDE Pliers Catalogue number 341 & 39071 Date 10/10/2007 Range Description A range of VDE approved Professional Electricians Pliers and cutters Range
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationGear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring
More informationTechnical data. Assembly: Introduction. Before starting construction. Equipment needed. Glider or Electro Glider?
Palio pro S2084 Technical data Wing span: Lenght: Weight: Wing area: Wing loading: El. Motor/ no. of cells: Controls: Introduction 2150 mm 1150 mm 1120 g 1860 g 42 dm2 27 g/dm2 44 g/dm2 600 / 7-8 cells
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationRebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
More informationCETAC Z-Drive Assembly
CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your
More informationAstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech
AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More informationTriac Printed Circuit Board Replacement
Technical Service Bulletin: Triac Printed Circuit Board Replacement TRONIC 5000C Pro Models: WH17, WH27, WH36 Introduction Fig. 1 ELECTRICITY IS EXTREMELY DANGEROUS. TAKE EXTRA PRECAUTIONS AND ENSURE ALL
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationBuild Your Own Solar Car Teach build learn renewable Energy! Page 1 of 1
Solar Car Teach build learn renewable Energy! Page 1 of 1 Background Not only is the sun a source of heat and light, it s a source of electricity too! Solar cells, also called photovoltaic cells, are used
More informationRELIABLE.PORTABLE.ESSENTIAL. POPUP DISPLAY SYSTEMS
RELIABLE.PORTABLE.ESSENTIAL. POPUP DISPLAY SYSTEMS The Coyote popup display system combines reliability, portability and style State-of-the-art rare earth neo magnets on individual channel bars make Coyotes
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationTraditional Sonar and DSI Sonar Installation
Traditional Sonar and DSI Sonar Installation This document covers the installation of the transducer and display unit installation, which includes connecting the unit to power and installing the unit on
More informationPortable Displays & Accessories
Portable Displays & Accessories Transcity Exhibitions Ltd 198 Churchill Way Biggin Hill Airport Kent TN1 3BN t: 0199 74100 f: 0199 74104 e: office@transcityexhibitions.com contents... Roller Banner Stands
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationDO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
More informationCable railing. Standard Cable Assemblies. Visit us online at www.geobezdan.com. Email your questions to info@geobezdan.com.
Cable railing Standard Cable Assemblies Visit us online at www.geobezdan.com. Email your questions to info@geobezdan.com. Figure 1 Figure 2 Figure 3 Figure 4 special end fittings are easy to install and
More informationBUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
More informationInstallation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationCALIBRATION FOR LAL20X & LAL24X
CALIBRATION AND FAULT FINDING FOR LAL20X & LAL24X DUMPY LEVELS MEASURING EXPERTS SINCE 1869 How The LAL20X & LAL24X Works The Automatic level is called Automatic because it requires only a simple basic
More informationINSTALLATION INSTRUCTIONS FOR 2006-2009 VW MK5
CI100018 INSTALLATION INSTRUCTIONS FOR 2006-2009 VW MK5 Rabbit, Jetta 2.5L These instructions are applicable to vehicles equipped with either manual or automatic transmissions Thank you for choosing to
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
More informationTechnical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationBEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationCANTERBURYMEDIA.COM TRADE SHOW HARDWARE CATALOG. 2117 Fourth Street STE C Berkeley California 94710 USA 2014-15 1.510.649.3001
CANTERBURYMEDIA.COM TRADE SHOW HARDWARE CATALOG 2014-15 2117 Fourth Street STE C Berkeley California 94710 USA 1.510.649.3001 RELIABLE.PORTABLE.ESSENTIAL. POPUP DISPLAY SYSTEMS The Coyote popup display
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationGIBRALTAR 6000 Series Cymbal Stands
GIBRALTAR 6000 Series Cymbal Stands Gibraltar Upgrades 6000 Series Cymbal Stands with Swing Nut fast cymbal mounting system. Professional in features yet light enough in weight and mass for easy transport.
More information2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be..
ROCKER PANELS 55,56,57 CHEVY REPLACEMENT Do not throw away any pieces when you first remove them. There are many supports that are not reproduced and will need to be used again. When disassembling try
More informationHT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool. Tool P/N HT-0095
HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool Tool P/N HT-0095 FCI MANUAL P/N 415988-001 Issued: Date (03/12/99) Page 1 of 18 HT-0095 Issued: Date (03/12/99) Page 2 of 18 Introduction Table
More information3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
More information6 LED colours: White Blue Green Red Yellow Amber
Illuminated contours can be found in many places on petrol stations and buildings of industrial, commercial and service companies. Such light bands visually emphasize the contours of a building during
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationINSTRUCTIONS FOR CHAIN LINK INSTALLATION Chain Link fence & Posts Meshdirect.co.uk
INSTRUCTIONS FOR CHAIN LINK INSTALLATION Chain Link fence & Posts Meshdirect.co.uk This guide explains how to correctly install our chain link fencing and post system. The guide provides details of the
More information2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
More informationCL001-V Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021C), blue (286C), black and red (185C).
Page 1 Custom USB Drives Custom USB Drives Page 1 CL001-V Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021C), blue (286C), black and red (185C). CL001-S Classic swivel
More informationIntexma Graphics (Pty) Ltd
Intexma Graphics (Pty) Ltd Distributors for the complete supply of signage materials comprising of single and double roll up stands, banner walls, point of sale tables, signage boards and light boxes.
More informationBILLET HEADLAMP SHELL
-J008 REV. 007-07- BILLET HEADLAMP SHELL GENERAL Kit Number 770-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationCable Drum Installation
20 Cable Drum Installation COUNTERBALANCE None Shake the TorqueMaster spring tube gently to extend the winding shafts out about 5" on each side. For single spring applications, there will be no left hand
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More informationFTC 2015-2016 DIY Mountain Build Guide
FTC 2015-2016 DIY Mountain Build Guide Assembly Instructions Check out the DIY2015-2016 Prints and BoM for individual part details. Release 1.0 9/10/15 Page 1 This guide and Bill of Materials are for constructing
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationSocket case Socket. Easy insertion of tube by the floating mechanism to adjust to the case hole. Clamp bolt. Possible to clamp with one bolt at once.
Multi-connector Series DM RoHS The use of the multiconnector enables panel mount connections with other apparatus and can provide the reliability of one-touch installation and removal of multi-tubes (nylon,
More informationCutting and Shearing die design Cutting die design
Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired
More informationPOLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS
POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS Polemount Field Fix Support If you have any questions or incur any problems installing or using the new Polemount, please use Miovision s Support System by emailing
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationStep by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More information