"MTC" NIPPERS / PLIERS - Japan

Size: px
Start display at page:

Download ""MTC" NIPPERS / PLIERS - Japan"

Transcription

1 Item No. Length Capacity Packing Price "MTC" MINI SIDE CUTTING PLIER MTC-1 With Edge Bolt Gripping MTC01 115mm Steel Wire 0.8mm 6 Size : A 118mm B 14mm E 21mm Turning " MTC" MINI DIAGONAL NIPPER MTC02 115mm Copper Wire 1.0mm 6 Size : A 118mm B 12mm D 49mm E 15mm MTC-2 For Copper Wire " MTC" MINI DIAGONAL NIPPER MTC02D 115mm Soft Wire 1.2mm 6 Copper Wire 2.0mm MTC-2D For Soft Wire & Copper Wire Size : A 118mm B 12mm D 49mm E 15mm 13

2 Item No. Length Capacity Packing Price "MTC" MINI DIAGONAL NIPPER MTC03 125mm Copper Wire 1.2mm 6 MTC-3 For Copper Wire Size : A 129mm B 12mm C 9mm E 16mm "MTC" MINI PLASTIC NIPPER MTC04 115mm Copper Wire 1.0mm 6 MTC-4 Full Flush Edge Ensures Burr-free on Plastic Products. Size : A 118mm B 14mm E 15mm "MTC" MINI PRECISION NIPPER MTC05 120mm Copper Wire 1.0mm 6 Size : A 125mm B 12mm C 6mm E 15mm MTC-5 With Narrow & Long Blade For Precision 14

3 Item No. Length Capacity Packing Price " MTC" MINI NEEDLE NOSE PLIER MTC06 125mm Steel Wire 1.0mm 6 MTC-6 Long Serrated Jaws With Edge Size : A 144mm B 13mm E 44mm Turning "MTC" MINI BENT NOSE PLIER MTC-7 Serrated Bent Nose With Edge MTC07 125mm Steel Wire 1.0mm 6 Size : A 141mm B 13mm Turning "MTC" MINI NIPPER MTC08 125mm Copper Wire 0.8mm 6 Size : A 127mm B - C - D 45mm E 12mm MTC-8 15

4 F G Item No. Length Capacity Packing Price "MTC" SLENDER LONG NOSE PLIER MTC-9 Turning Bolt Gripping With Edge One Wire Hole MTC09 125mm Steel Wire 1.0mm 6 Size : A 145.0mm B 12.5mm C 8.0mm D 51.0mm E 42.0mm F G 3.0mm 2.0mm Long Serrated Jaws "MTC" NEEDLE NOSE PLIER MTC10SP 150mm Steel Wire 1.2mm 6 MTC-10SP Bolt Gripping With Edge Two Wire Separating Holes Can Separate Parallel Wires One Wire Hole Size : A 162mm B 14mm E 54mm Turning "MTC" MINI FLAT NOSE PLIER MTC-11 Turning Smooth Jaws Without Edge MTC11 115mm - 6 Size : A 118mm B 11mm E 23mm F 2.5mm G 3.5mm " MTC" MINI END CUTTER NIPPER MTC12 115mm Steel Wire 1.0mm 6 MTC-12 For or Pulling Nails With Rolling Motion Size : A 114mm B 18mm C 14mm E 9mm 16

5 Item No. Length Capacity Packing Price "MTC" MINI LONG NOSE PLIER MTC13 125mm Steel Wire 1.0mm 6 MTC-13 With Edge Turning Size : A 133mm B 13mm E 36mm "MTC" MINI LONG NOSE PLIER MTC14 125mm - 6 MTC-14 Smooth Jaws Without Edge Size : A 133mm B 13mm C 8mm Turning E 36mm "MTC" POINT LONG NOSE PLIER MTC-15P With Edge Turning MTC15P 115mm Steel Wire 0.8mm 6 Size : A 124mm B 12mm E 30mm " MTC" MINI LONG NOSE PLIER MTC16 100mm Steel Wire 0.6mm 6 MTC-16 With Edge Size : A 102mm B 10mm C 7mm D 44mm E 23mm Turning 17

6 Item No. Length Capacity Packing Price "MTC" MINI DIAGONAL NIPPER MTC17 100mm Copper Wire 0.8mm 6 MTC-17 For Copper Wire Size : A 102mm B 11mm C 7mm D 44mm E 14mm "MTC" MINI LONG FLAT NOSE PLIER F G MTC-18 Smooth Jaws Without Edge MTC18 125mm - 6 Size : A 133mm B 13mm D 48mm E 38mm F 2.5mm G 3.5mm Turning "MTC" NEEDLE NOSE PLIER MTC-19 Turning Long Smooth Jaws Without Edge MTC19 125mm - 6 Size : A 132mm B 14mm D 48mm E 38mm F 3mm G 2.5mm 18

7 Item No. Length Capacity Packing Price " MTC" PLASTIC NIPPER MTC-21 Full Flush Edge For Plastic MTC21 125mm Copper Wire 1.8mm 6 Size : A 132mm B 17mm C 10mm D 49mm E 20mm "MTC" PLASTIC NIPPER MTC-21S With Narrow And Thin Full Flush Edge For Plastic MTC21S 145mm Copper Wire 1.6mm 6 Size : A 144.0mm B 12.5mm C 9.5mm D 46.0mm E 18.0mm "MTC" PLASTIC NIPPER MTC-22 With Full Flush Edge For Plastic MTC22 150mm Copper Wire 2.0mm 6 Size : A 162mm B 19mm C 11mm E 22mm "MTC" PLASTIC NIPPER WITH ADJUSTING SCREW MTC-22N With Full Flush Edge For Plastic With Adjusting Screw MTC22N 150mm Copper Wire 1.6mm 6 Size : A 163mm B 19mm C 10mm E 23mm 19

8 Item. No Length Capacity Packing Price "MTC" PLASTIC NIPPER MTC22S 165mm Copper Wire 1.8mm 6 MTC-22S With Narrow And Long Blade For Precision Size : A 167.0mm B 15.5mm C 10.0mm D 46.0mm E 22.5mm "MTC" PLASTIC NIPPER MTC-23 With Full Flush Edge For Plastic MTC23 175mm Copper Wire 1.8mm 6 Size : A 190.0mm B 22.0mm C 10.5mm D 48.0mm E 25.5mm "MTC" DIAGONAL CUTTING PLIER MTC-25B With One Wire Hole MTC25B 125mm Steel Wire 1.6mm 6 Size : A 132mm B 17mm C 10mm E 20mm "MTC" DIAGONAL CUTTING PLIER MTC-26B With One Wire Hole MTC26B 150mm Steel Wire 1.8mm 6 Size : A 161mm B 19mm C 11mm E 22mm 20

9 Item No. Length Capacity Packing Price "MTC" DIAGONAL CUTTING PLIER MTC26PS 150mm Steel Wire 1.8mm 6 MTC-26PS Highly Insulated Handle With One Wire Hole Size : A 160mm B 19mm C 11mm D 48mm E 22mm "MTC" DIAGONAL CUTTING PLIER MTC MTC27 175mm Steel Wire 1.8mm 6 Size : A 187.0mm B 22.0mm C 11.5mm D 50.0mm E 24.0mm "MTC" LONG NOSE PLIER F MTC28B 125mm Steel Wire 1.0mm 6 G MTC-28B With Edge. Size : A 138.0mm B 16.6mm C 10.0mm D 48.0mm E 43.5mm F 4.0mm G 3.0mm Turning Sure gripping pipe, etc. Crimping terminals Two wire separating holes One wire stripping hole MTC-29AB Serrated Jaws With Bolt Gripping Design Can Use As Wire Stripper, Crimper, Cutter And Parallel Wire Stripper Turning "MTC" LONG NOSE PLIER MTC29AB 150mm Steel Wire 1.2mm 6 Size : A 161mm B 17mm C 10mm D 52mm E 50mm F 3.5mm G 2.5mm 21

10 F G Item No. Length Capacity Packing Price "MTC" LONG NOSE PLIER MTC-29B With Edge. Turning MTC29B 150mm Steel Wire 1.2mm 6 Size : A 161mm B 17mm C 10mm D 52mm E 50mm F 3.5mm G 2.5mm MTC-30 With Edge. Turning "MTC" LONG NOSE PLIER MTC30 200mm Steel Wire 1.8mm 6 Size : A 198.0mm B 18.0mm C 10.5mm D 50.0mm E 65.0mm F 4.0mm G 3.0mm "MTC" LINEMAN'S SIDE CUTTING PLIER MTC31 125mm Steel Wire 1.0mm 6 MTC-31 With Edge. Size : A 137mm B 16mm C 10mm Turning "MTC" LINEMAN'S SIDE CUTTING PLIER MTC-32 With Edge. Turning MTC32 150mm Steel Wire 1.6mm 6 Size : A 162.0mm B 22.0mm C 12.5mm D 49.0mm 22

11 Item No. Length Capacity Packing Price "MTC" LINEMAN'S SIDE CUTTING PLIER MTC-33 With Edge. Turning MTC33 175mm Steel Wire 1.8mm 6 Size : A 187.0mm B 24.0mm C 13.5mm D 51.0mm "MTC" LINEMAN'S SIDE CUTTING PLIER MTC-34 With Edge. Turning MTC34 200mm Steel Wire 2.0mm 6 Size : A 212.0mm B 27.0mm C 14.5mm D 53.0mm "MTC" END CUTTING PLIER MTC35 150mm Steel Wire 1.6mm 6 MTC-35 Or Pulling Nails With Rolling Motion Size : A 166mm B 34mm C 12mm E 25mm F 9.5mm "MTC" ANGLE CUTTING PLIER MTC36B 125mm Copper Wire 1.6mm 6 MTC-36B Angle Jaws Size : A 132mm B 14mm C 10mm E 23mm To Separate Twin Vinyl Coated Wires One Wire Hole 23

12 Item No. Length Capacity Packing Price "MTC" ANGLE CUTTING PLIER MTC37B 150mm Copper Wire 2.0mm 6 MTC-37B Angle Jaws To Separate Twin Vinyl Coated Wires One Wire Hole Size : A 157mm B 15mm C 11mm E 25mm "MTC" SLENDER SIDE CUTTING PLIER MTC38 150mm Steel Wire 1.6mm 6 MTC-38 Bolt Gripping Edge With One Wire Hole Size : A 161.0mm B 23.0mm C 11.5mm D 49.0mm Turning "MTC" SLENDER SIDE CUTTING PLIER MTC-39 Bolt Gripping Edge With One Wire Hole MTC39 175mm Steel Wire 1.8mm 6 Size : A 178.0mm B 25.0mm C 12.5mm D 51.0mm Turning MTC-40 Turning Bolt Gripping Edge With One Wire Hole "MTC" SLENDER SIDE CUTTING PLIER MTC40 200mm Steel Wire 2.0mm 6 Size : A 205mm B 28mm C 13mm D 53mm 24

13 Item No. Length Capacity Packing Price "MTC" BENT NOSE PLIER MTC-41 Serrated Bent Nose Edge Turning MTC41 150mm Steel Wire 1.2mm 6 Size : A 157mm B 17mm C 10mm D 52mm "MTC" SIDE CUTTING PLIER WITH INSULATED HANDLE MTC42 150mm Steel Wire 1.6mm 6 Edge Size : A 165.0mm B 22.0mm C 12.5mm D 52.0mm MTC-42 Highly Insulated Handle Turning "MTC" SIDE CUTTING PLIER WITH INSULATED HANDLE MTC-43 Edge Highly Insulated Handle MTC43 175mm Steel Wire 1.8mm 6 Size : A 190.0mm B 24.0mm C 13.5mm D 54.0mm Turning "MTC" SIDE CUTTING PLIER WITH INSULATED HANDLE MTC-44 Edge Highly Insulated Handle MTC44 200mm Steel Wire 2.0mm 6 Size : A 215.0mm B 27.0mm C 14.5mm D 58.0mm Turning 25

14 MTC-45 Item No. Length Capacity Packing Price "MTC" CABLE CUTTER WITH TWO-WAVED CUTTING EDGE MTC45 150mm Copper / Aluminium 6 Cable 9.0mmØ Size : A 162.0mm B 25.5mm C 11.0mm D 47.0mm "MTC" CABLE CUTTER WITH TWO-WAVED CUTTING EDGE MTC MTC46 200mm Copper / Aluminium 6 Cable 11.0mmØ Size : A 212.0mm B 29.5mm C 12.0mm D 47.0mm "MTC" CABLE CUTTER WITH TWO-WAVED CUTTING EDGE MTC MTC47 250mm Copper / Aluminium 6 Cable 13.0mmØ Size : A 239.0mm B 35.0mm C 14.0mm D 47.0mm "MTC" DUCK BILL PLIER MTC49 200mm - 6 Tip section F G MTC-49 Serrated Flat Jaws Size : A 210.0mm B 17.5mm C 11.0mm D 52.0mm E 41.0mm F 3.5mm G 6.0mm Turning 26

15 Item No. Length Capacity Packing Price "MTC" MULTI-PURPOSE PLIER MTC-51 Ideal For Wire, Coiling,, Crimping Terminals And MTC51 150mm Steel Wire 1.2mm 6 Size : A 164.0mm B 17.5mm C 10.5mm D 52.0mm F "MTC" NEEDLE NOSE PLIER G MTC52 150mm Steel Wire 1.2mm 6 MTC-52 Turning Bolt Gripping With Edge Size : A 165mm B 16mm C 10mm D 52mm E 53mm F 3.5mm G 2.5mm "MTC" ROUND NOSE PLIER MTC57 145mm - 6 MTC-57 Size : A 144mm B 15mm E 38mm " MTC" MINI WIRE STRIPPER MTC58 125mm 0.25~2mm² 6 Adjustable Sizes: 0.25~2.0mm² MTC-58 Size : A 127mm B 14mm C 7mm 27

16 Item No. Length Capacity Packing Price "MTC" MINI EDGE NIPPER MTC MTC59 115mm Copper Wire 1.0mm 6 Size : A 118mm B 11mm E 4mm "MTC" SIDE CUTTING PLIER WITH CRIMPING DIE MTC-60 Turning MTC60 200mm Steel Wire 2.0mm 6 Size : A 210.0mm B 27.0mm C 14.5mm D 50.0mm "MTC" WIRE ROPE CUTTER MTC61 150mm Wire Rope 3.0m m 6 MTC-61 Size : A 168mm B 21mm C 13mm D 41mm E 5mm " MTC" 90 ANGLE PLASTIC NIPPER MTC62 150mm Copper Wire 2.0mm 6 MTC-62 Size : A 144.0mm B 14.5mm C 18.0mm D 50.0mm E 15.0mm " MTC" 45 ANGLE PLASTIC NIPPER MTC MTC63 150mm Copper Wire 2.0mm 6 Size : A 156.0mm B 14.5mm C 18.0mm D 50.0mm E 15.0mm 28

17 NO. S 2-1 "MTC" NIPPER AND PLIER Item No. Length Capacity Packing Price "MTC" WIRE ROPE CUTTER MTC70 200mm Wire Rope 6.0mm 6 MTC-70 Size : A 200mm B 28mm C 22mm "MTC" SLIP JOINT PLIER MTCPL mm Mild Steel Wire 6 HRC mm MTC-PL200 Size : A 204.0mm B 28.0mm C 11.0mm D 46.0mm F 45.0mm Turning NO. S 2-2 "MTC" 2-PC PLIER SET Item No. Model Contents Price No. (set) MTC1517 MTC-1517 MTC-15P Point Long Nose Plier. Lgth: 115mm. With Spring & Serrated Jaws. Cap: Steel Wire 0.8mm. MTC-1517 MTC-17 Mini Diagonal Nipper. Lgth: 100mm. With Spring Cap: Copper Wire 0.8mm 29

18 NO. S 2-3 "MTC" SNAP RING PLIER Item No. Length Diameter Capacity Packing Price (mm) (mm) (pcs/box) (pc) No. S 2-3 "MTC" SNAP RING PLIER - 7" EXTERNAL BENT MTC-72OB MTC72OB 175mm ~ 40 6 Size : A 165.0mm B 29.0mm C 10.0mm D 85.0mm E 35.0mm No. S 2-3 "MTC" SNAP RING PLIER - 7" INTERNAL BENT MTC73CB 175mm ~ 60 6 Size : A 169.0mm B 21.0mm C 10.0mm D 52.0mm E 34.0mm MTC-73CB No. S 2-3 "MTC" SNAP RING PLIER - 9" EXTERNAL STRAIGHT MTC94OS 230mm ~ 75 6 Size : A 241.0mm B 33.0mm C 11.0mm D 108.0mm E 57.0mm MTC-94OS No. S 2-3 "MTC" SNAP RING PLIER - 9" INTERNAL STRAIGHT MTC95CS 230mm ~ 80 6 Size : A 241.0mm B 23.0mm C 11.0mm D 52.0mm E 55.0mm MTC-95CS 30

19 "DOGYU" HAMMERS - Japan NO. S "DOGYU" WOODEN HANDLE URETHANE HAMMER Item No. Head Wt. Face Ø O.L Total Packing (pcs) Price (mm) (mm) Wt (g) Box / Ctn (pc) UHW lb UHW lb per pce X-UHW20SH Spare head for 2.0 lb urethane hammer X-UHW30SH Spare head for 3.0 lb urethane hammer NO. S "DOGYU" TESTING HAMMER WITH WOODEN HANDLE Item No. Head Face Ø Head O.L Total Packing (pcs) Price Wt. (mm) Lg(mm) (mm) Wt (g) Box / Ctn (pc) TH4 1/4 lb TH8 1/2 lb NO. S "DOGYU" TESTING HAMMER WITH FIBREGLASS HANDLE Item No. Head Face Ø Head O.L Total Packing (pcs) Price Wt (mm) Lg(mm) (mm) Wt (g) Box / Ctn (pc) TH4F 1/4 lb NO. S "DOGYU" RESCUE HAMMER Item No. Total O.L Packing (pcs) Price Weight (mm) Box / Ctn (pc) DH g NO. S "MTC" WOODEN MALLET Item No. Face Ø Head Lgth O.L Total Packing Price (mm) (mm) (mm) Wt (g) (pcs per ctn) (pc) WM WM WM WM WM WM WM

Micro Precision Tools Your partner for precision applications

Micro Precision Tools Your partner for precision applications Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic

More information

LEADER IN CUTTING TECHNOLOGY

LEADER IN CUTTING TECHNOLOGY LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of

More information

Connect. Cable preparation and cutting tools

Connect. Cable preparation and cutting tools Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic

More information

SCREWDRIVER SAFETY TIPS

SCREWDRIVER SAFETY TIPS SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose

More information

$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:

$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set: D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth

More information

TAMPA ELECTRIC COMPANY ENERGY SUPPLY EXPOSED BLADE CUTTING TOOLS PROGRAM

TAMPA ELECTRIC COMPANY ENERGY SUPPLY EXPOSED BLADE CUTTING TOOLS PROGRAM EXPOSED BLADE CUTTING TOOLS PROGRAM TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 1 EMPLOYEE TRAINING INCLUDING DOCUMENTATION 2 GENERAL EXPECTATIONS 3 PERIODIC PROGRAM REVIEW 4

More information

Metal Bending Tools, Scribes & Awls

Metal Bending Tools, Scribes & Awls Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends

More information

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928 WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.

More information

Standard Sleep Pod Side Entry Assembly Instructions

Standard Sleep Pod Side Entry Assembly Instructions Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people

More information

HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool. Tool P/N HT-0095

HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool. Tool P/N HT-0095 HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool Tool P/N HT-0095 FCI MANUAL P/N 415988-001 Issued: Date (03/12/99) Page 1 of 18 HT-0095 Issued: Date (03/12/99) Page 2 of 18 Introduction Table

More information

Reputable high end tools trusted by professional plumbers, electricians, mechanics, and more. Not your average department store tools.

Reputable high end tools trusted by professional plumbers, electricians, mechanics, and more. Not your average department store tools. CHANNELLOCKINFO What are CHANNELLOCK tools? Reputable high end tools trusted by professional plumbers, electricians, mechanics, and more. Not your average department store tools. Best known for its Tongue

More information

www.huskietools.com 71

www.huskietools.com 71 www.huskietools.com 71 S-Series Hydraulic Handheld Cutters P. 75 Ratchet Cable Cutters P. 73 Low Pressure Cable Cutter P. 79 SP-Series Hydraulic Handheld Cutter Heads P. 77 Cable and Insulation Strippers

More information

Mini Wire Jewelry Tutorials for Beginners Created by XQ Designs www.handmade-jewelry-club.com,

Mini Wire Jewelry Tutorials for Beginners Created by XQ Designs www.handmade-jewelry-club.com, Mini Wire Jewelry Tutorials for Beginners Created by XQ Designs www.handmade-jewelry-club.com, www.diylessons.org Please do not distribute, lend or copy. Do not mass produce. Copyrights 2010 XQ Designs

More information

Precision Vise Combinations

Precision Vise Combinations Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere

More information

FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials

FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter

More information

DTU Animal Cart Programme

DTU Animal Cart Programme DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523

More information

I N T E R N A L S E C U R I T Y

I N T E R N A L S E C U R I T Y I N T E R N A L S E C U R I T Y E Q U I P M E N T Founded by Walter E. Wisbey in the late 1940ʼs as specialists in surgical instrument repair, the company rapidly developed a comprehensive engineering

More information

Furniture Fittings Furniture Handles and Knobs

Furniture Fittings Furniture Handles and Knobs Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.

More information

SCISSORS, SNIPS AND CUTTING TOOLS

SCISSORS, SNIPS AND CUTTING TOOLS SCISSORS, SNIPS AND CUTTING TOOLS Wiss Table of Contents Contents Page No. Snips Introduction 207 Metalmaster Compound Action Snips 208-210 Metal-Wizz Snips 211 All-purpose Cutter 211 Snips out of Drop

More information

Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs

Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap

More information

AMPSEAL* Automotive Plug Connector and Header Assembly

AMPSEAL* Automotive Plug Connector and Header Assembly AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2

More information

HOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY

HOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY HOW-TO HOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY Most floor coverings, if laid over uneven wooden floors, will wear unevenly and look unsightly. The answer is to cover the old boards with hardboard

More information

www.cornholesupplies.com

www.cornholesupplies.com www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure

More information

POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS

POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS Polemount Field Fix Support If you have any questions or incur any problems installing or using the new Polemount, please use Miovision s Support System by emailing

More information

Schneider Automation Modbus Plus Network Installing Clustered Node Devices 31000939 00 Version 2.0

Schneider Automation Modbus Plus Network Installing Clustered Node Devices 31000939 00 Version 2.0 Schneider Automation Modbus Plus Network Installing Clustered Node Devices 3000939 00 Version.0 Modbus Plus devices must be installed as specified in a network layout plan, showing each device s mounting

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION PRODUCT SPECIFICATION Brand C.K Product Range SensoPlus VDE Pliers Catalogue number 341 & 39071 Date 10/10/2007 Range Description A range of VDE approved Professional Electricians Pliers and cutters Range

More information

OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST

OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie

More information

Technique Guide. Screw Removal Set. Instruments for removing Synthes screws.

Technique Guide. Screw Removal Set. Instruments for removing Synthes screws. Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information

More information

MIN Set. Instruments for Minimally Invasive Neurosurgery. Aesculap Neurosurgery

MIN Set. Instruments for Minimally Invasive Neurosurgery. Aesculap Neurosurgery MIN Set Instruments for Minimally Invasive Neurosurgery Aesculap Neurosurgery MIN Set Features Fine instrument tips Especially important when working in very narrow spaces and close to sensitive structures.

More information

Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.

Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4. Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime

More information

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology

More information

Happy Endings: Turning Kumi Braids Into Necklaces and Bracelets. Preparation. by A.G. Lindsay (agl@theworld.com)

Happy Endings: Turning Kumi Braids Into Necklaces and Bracelets. Preparation. by A.G. Lindsay (agl@theworld.com) Happy Endings: Turning Kumi Braids Into Necklaces and Bracelets by A.G. Lindsay (agl@theworld.com) When I started to learn the craft of Kumihimo, I produced many thin braids of between 8 and 16 strands,

More information

Go-kart for little race-drivers

Go-kart for little race-drivers Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it

More information

Build Your Own Solar Car Teach build learn renewable Energy! Page 1 of 1

Build Your Own Solar Car Teach build learn renewable Energy! Page 1 of 1 Solar Car Teach build learn renewable Energy! Page 1 of 1 Background Not only is the sun a source of heat and light, it s a source of electricity too! Solar cells, also called photovoltaic cells, are used

More information

ROOFING TOOLS FROM FREUND

ROOFING TOOLS FROM FREUND ROOFING TOOLS FROM FREUND ROOFING TOOLS THE DESIGN OF ROOFS AND FACADES REQUIRES HIGH DEMANDS even for your tools. That s why we offer a large assortment of quality tools that are specialized and tailor-made

More information

Step 1. Item 6. Item 1

Step 1. Item 6. Item 1 Voltage Regulators QD3/T350 Motor Replacement Kit Kit Number 57A63675100B Service Information S225-50-35 Contents General..................................... 1 Parts Supplied...............................

More information

NOT SEARCHING, BUT FINDING

NOT SEARCHING, BUT FINDING NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide

More information

AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST

AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST REVISED 5/14/13 (per AVM Student Handbook) Tools are not needed the first day of class but are required by the second week of the semester. TOOLS Under

More information

INFO. Crimping pliers

INFO. Crimping pliers for end sleeves When crimping end sleeves a distinction is made between sleeves with and without plastic collars and between trapezoid, square and hexagon pressing. The sleeves with a plastic collar make

More information

SIG 556 Match Sear/Hammer Installation

SIG 556 Match Sear/Hammer Installation SIG 556 Match Sear/Hammer Installation ShootingSight LLC 2012 Safety Warning Always verify your firearm is unloaded before working on it. These instructions are meant as a supplemental guide to an armorer

More information

Reasons for reissue are provided in Section 6, REVISION SUMMARY.

Reasons for reissue are provided in Section 6, REVISION SUMMARY. Reasons for reissue are provided in Section 6, REVISION SUMMARY. The FRONT OF TOOL has the AMP marking on the link. The BACK OF TOOL (Wire Side), into which the wire is inserted, has the wire size marked

More information

W I T H I N J O I ST S I N STA L L AT I ON

W I T H I N J O I ST S I N STA L L AT I ON Radiantec W I T H I N J O I ST S I N STA L L AT I ON I N S TA L L AT I O N S U P P L E M E N T 260 Joists When tubing is placed beneath a joisted floor system, it is weaved between the joists and supported

More information

Surgical scissors and forceps Product List

Surgical scissors and forceps Product List Surgical scissors and forceps Product List Sr. No Items Picture of Product Product specification 1 Grasping forceps-- 5 MM Grasping forceps are used to remove stones and retrieve foreign objects under

More information

Reasons for reissue are in Section 6, REVISION SUMMARY.

Reasons for reissue are in Section 6, REVISION SUMMARY. Figure 1 This instruction sheet covers the application of OPTIMATE FSMA Fiber Optic Connector Types 905 and 906 for data and telecommunications applications. Base part numbers which apply to each type

More information

VETERINARY INSTRUMENTS

VETERINARY INSTRUMENTS Hoof and claw instruments 99 AHM-5001 Left hand Single edge AHM-5005 Right hand single edge 001 VETERINARY INSTRUMTS AHM-5002 Left hand single edge with narrow blade AHM-5006 Right hand single edge AHM-5003

More information

Panel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST

Panel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy

More information

Exciting new fashionable design... POSEIDON REEF BRACELET INSTRUCTION GUIDE

Exciting new fashionable design... POSEIDON REEF BRACELET INSTRUCTION GUIDE Exciting new fashionable design... POSEIDON REEF BRACELET INSTRUCTION GUIDE Stringing POSEIDON REEF BRACELET SWAROVSKI ELEMENTS Article Product Group Article No. Amount Size Color Color Code Fancy Stones

More information

PARTS FOR OTHER EMBROIDERY MACHINES

PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6

More information

Stainless Steel Cable Assemblies to Enhance Any Railing and Any View!

Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! 2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,

More information

INSTALLATION PROCEDURES FOR PRINTED CIRCUIT BOARD TERMINATORS D-607-XX

INSTALLATION PROCEDURES FOR PRINTED CIRCUIT BOARD TERMINATORS D-607-XX Page: 1 of 9 INSTALLATION PROCEDURES FOR PRINTED CIRCUIT BOARD TERMINATORS D-607-XX 1. SCOPE This engineering standard contains the termination procedures and inspection requirements for the printed circuit

More information

SIZE: 10" WATER PUMP PLIER, SIIRTOLEUKAPIHDIT 10" S IKH47A 6" LONG NOSE PLIER, KÄRKIPIHDIT 6" S IKH47G 6" DIAGONAL PLIER SIVULEIKKURIT 6" S IKH47D

SIZE: 10 WATER PUMP PLIER, SIIRTOLEUKAPIHDIT 10 S IKH47A 6 LONG NOSE PLIER, KÄRKIPIHDIT 6 S IKH47G 6 DIAGONAL PLIER SIVULEIKKURIT 6 S IKH47D IKH1500/IKH1501 OSAT JR02 3PC PLIER SET SIZE: 10" WATER PUMP PLIER, SIIRTOLEUKAPIHDIT 10" S IKH47A 6" LONG NOSE PLIER, KÄRKIPIHDIT 6" S IKH47G 6" DIAGONAL PLIER SIVULEIKKURIT 6" S IKH47D JR04 JR05 16PC

More information

1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS

1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool

More information

Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable

Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable Panduit Corp. 2009 BEST PRACTICES PN447B \ Table of Contents 3 2.0 Preparation Notes Tools and Material

More information

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2 TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION

More information

Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.

Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Air Pressure 586.1 min 689.5 kpa max [85 min 100 psi max] Air Displacement 721,000 mm 3 [44 in. 3 ] Figure 1 Weight

More information

WIRE, TERMINAL AND CONNECTOR REPAIR CONDUCTORS

WIRE, TERMINAL AND CONNECTOR REPAIR CONDUCTORS CONDUCTORS Conductors are needed to complete the path for electrical current to flow from the power source to the working devices and back to the power source. Special wiring is needed for battery cables

More information

CAM-03, Camshaft Assembly Oil Seal Replacement

CAM-03, Camshaft Assembly Oil Seal Replacement CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner

More information

REPLACEMENT INSTRUCTIONS FOR AWNING

REPLACEMENT INSTRUCTIONS FOR AWNING REPLACEMENT INSTRUCTIONS FOR AWNING Fabric Roller Tube Torsion Assembly For Models 8500 & 9000 Tools Required: Vise Grips Socket Wrench Set 3/16" rill Bit 1/8" Pop Rivets End Cap Guide Screwdriver Electric

More information

Guidelines for Earthquake Bracing of Residential Water Heaters

Guidelines for Earthquake Bracing of Residential Water Heaters Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)

More information

Installation Instructions

Installation Instructions Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate

More information

Anderson Powerpoles. Powerpole Assembly Instructions for SCOUT, NAVIGATOR AND RANGER ROV s

Anderson Powerpoles. Powerpole Assembly Instructions for SCOUT, NAVIGATOR AND RANGER ROV s Anderson Powerpoles Powerpole Assembly Instructions for SCOUT, NAVIGATOR AND RANGER ROV s Anderson Powerpoles Power Connections NEW in 2016!!! ELEC-010E: Power supply connections will be Red/Black Anderson

More information

TopSky DLG Installation Manual

TopSky DLG Installation Manual TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper

More information

Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List

Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

Gear PEPSI CAN STOVE INSTRUCTIONS

Gear PEPSI CAN STOVE INSTRUCTIONS Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring

More information

Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions

Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions ABS-Lock X / X - SR Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions The ABS-Lock X system was developed to provide both a secure single anchorage point for

More information

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830

More information

Product # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.

Product # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2. Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Installation instruction CASAFLEX - Connecting piece DN 100

Installation instruction CASAFLEX - Connecting piece DN 100 1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust

More information

Guidelines for Earthquake Bracing Residential Water Heaters

Guidelines for Earthquake Bracing Residential Water Heaters Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the

More information

CataLoG No. weight o.d. i.d. GLaSSwaRe

CataLoG No. weight o.d. i.d. GLaSSwaRe Lead weights with Vikem Vinyl Coating Protect and Stabilize Expensive Glassware Stabilizes vessels in water baths and on benchtops Added insurance against tipping and possible chemical spills Closed ring

More information

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION

More information

ELECTRICAL RANGE INNOVATION. KNIPEX X-Cut Compact and light. Powerful and precise. Cuts finest strands as well as multi-core cables and piano wires.

ELECTRICAL RANGE INNOVATION. KNIPEX X-Cut Compact and light. Powerful and precise. Cuts finest strands as well as multi-core cables and piano wires. ELECTRICAL RANGE KNIPEX X-Cut Compact and light. Powerful and precise. Cuts finest strands as well as multi-core cables and piano wires. box-joint design: highest stability with low weight doubly supported

More information

Cutting and stripping tools

Cutting and stripping tools Cutting and stripping tools Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting

More information

Spreader Light Bulb Replacement Instructions

Spreader Light Bulb Replacement Instructions Spreader Light Bulb Replacement Instructions IMPORTANT: DISCONNECT LIGHT FROM BATTERY BEFORE PROCEEDING. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY OR OTHER DAMAGE. Tools Needed You will need the following

More information

INSTALLATION INSTRUCTIONS: Viewline 52 mm

INSTALLATION INSTRUCTIONS: Viewline 52 mm -5 Safety information The product was developed, manufactured and inspected according to the basic safety requirements of EC Guidelines and state-of-the-art technology. The instrument is designed for use

More information

IntelliChlor Flow-Temperature Switch Replacement Kit Installation Guide

IntelliChlor Flow-Temperature Switch Replacement Kit Installation Guide IntelliChlor Flow-Temperature Switch Replacement Kit Installation Guide Technical Support Sanford, North Carolina (8 A.M. to 5 P.M.) Moorpark, California (8 A.M. to 5 P.M.) Phone: (800) 831-7133 Fax: (800)

More information

Professional HEX Tools Inch & Metric

Professional HEX Tools Inch & Metric Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black

More information

C-Plus Softgrip Screwdrivers

C-Plus Softgrip Screwdrivers 10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into

More information

5-Other arc welding WELDING TOOLS AND ACCESSORIES

5-Other arc welding WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...

More information

Assembling an AR-15 Parts CheckList:

Assembling an AR-15 Parts CheckList: Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...

More information

MGB Chrome Bumper Conversion

MGB Chrome Bumper Conversion MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different

More information

758 Heavy-duty Ratchet Guy Wire Cutter

758 Heavy-duty Ratchet Guy Wire Cutter INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product

More information

Printrbot Getting Started Guide. For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr

Printrbot Getting Started Guide. For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr Printrbot Getting Started Guide For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr Contents 4 Chapter 1: Welcome 4 Overview 4 Support 5 Chapter 2: Your Printrbot has arrived... now what? 5

More information

RATCHET RELEASE SHACKLE

RATCHET RELEASE SHACKLE RATCHET RELEASE SHACKLE INNOVATIVE PILING EQUIPMENT HYDRAULIC PILING HAMMERS EURO RATCHET RELEASE SHACKLE FOR STEEL ERECTION OPERATORS INSTRUCTIONS & SPARE PARTS LIST EXCAVATOR MOUNTED VIBRATORS EXCAVATOR

More information

Power Cube Open Source Ecology Page 1. Power Cube. Version 4

Power Cube Open Source Ecology Page 1. Power Cube. Version 4 Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete

More information

15 Minute Practical Trigger Job for the AR-15

15 Minute Practical Trigger Job for the AR-15 15 Minute Practical Trigger Job for the AR-15 By AFreeMan Medcop was shooting Urodoji s CAR-15 and had commented to him on the excellent, smooth trigger. I was asked to send Medcop a description of how

More information

EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...

EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what

More information

www.the Floor Heating Warehouse.co.uk

www.the Floor Heating Warehouse.co.uk www.the Floor Heating Warehouse.co.uk Underfloor Heating Installation Guide (Grundfoss Pump System) General Overview: Our water based underfloor heating system can be installed by your own plumber or heating

More information

Sheet Metal Bending. By- Prem Mahendranathan

Sheet Metal Bending. By- Prem Mahendranathan Sheet Metal Bending By- BENDING n Bending is a manufacturing process by which a metal can be deformed by plastically deforming the material and changing its shape n Deformation about one axis PROFILES

More information

For the Hardware Home Center Market Pipe Cleaning Tools since 1930

For the Hardware Home Center Market Pipe Cleaning Tools since 1930 H-108 For the Hardware Home Center Market Pipe Cleaning Tools since 1930 Premium Drain Auger Increase drain auger sales by ordering them with these attractive tamper-resistant plastic display bags. Complete

More information

Assembly Instruction CAI- Connector with universal Endbell

Assembly Instruction CAI- Connector with universal Endbell CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

2006 JUDY SERVICE GUIDE

2006 JUDY SERVICE GUIDE 2006 JUDY SERVICE GUIDE For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject

More information

Elecraft K3 KPA3 Power Connector Replacement Revision A Review, April 16, 2012 Copyright 2012, Elecraft, Inc. All Rights Reserved

Elecraft K3 KPA3 Power Connector Replacement Revision A Review, April 16, 2012 Copyright 2012, Elecraft, Inc. All Rights Reserved Introduction Elecraft K3 KPA3 Power Connector Replacement Revision A Review, April 16, 2012 Copyright 2012, Elecraft, Inc. All Rights Reserved The connectors furnishing high current to the KPA3 module

More information

The Drink-Aide The NEW look of independence

The Drink-Aide The NEW look of independence The Drink-Aide The NEW look of independence Introducing Drink-Aide What is Drink-Aide? The Drink-Aide is a water bottle that attaches easily to a wheelchair for use by persons with little or no upper

More information

How to Build Your Own CornHole Game

How to Build Your Own CornHole Game How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2

More information