MINIMUM PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS DEPARTMENT/OCCUPATION: CARPENTER SHOP SUPERVISOR/MANAGER: GARY LACHANCE REVISED: 06/30/2016
|
|
- Kelly Gregory
- 7 years ago
- Views:
Transcription
1 CARPENTER SHOP SUPERVISOR/MANAGER: GARY LACHANCE REVISED: 06/30/2016 Working with power tools, machinery or Removing or replacing glass Working on floors or close to ground Working above ceiling tiles or ceiling repair Cutting keys ARE DAMAGED OR UNDER REPAIR Shattering glass Cuts and punctures Knee injury Overhead hazards Falling particles Flying metal particles with side shields if required if required as needed Work shoes as needed if required Knee pads as needed if required
2 PLUMBERS & HVAC SUPERVISOR/MANAGER: RANDY WRIGHT REVISED: 06/30/2016 Working with power tools, grinders, machinery or Boiler cleaning Repairing plumbing in bathrooms Welding and soldering Working with swimming pool chemicals and Working with chemicals (see SDS) Electrical or mechanical hazards Confined space entry Bloodborne Pathogens Burns to face Burns to hands and Body Chemical burns and other hazards (See SDS) as needed Face shield w/rubber gloves Lock out/tag out See OSHA Requirements Welders Shield Leather gloves Leather welding cape Face shield w/rubber gloves
3 ELECTRICIANS SUPERVISOR/MANAGER: RANDY WRIGHT REVISED: 06/30/2016 Safety DI Rated Working with medium to high voltage Working under or above drop ceilings or ceiling tiles Changing lights and ballasts Electrical shock *Arc flash Other required safety items to protect yourself and others from the potential of electrical shock or Arc Flash. See Arc Flash program. Falling objects Particles dropping into eye Electrical shock Fall from ladder Flying objects in eye Lock out/tag out *See Arc Flash Program in development Safety signs and barricades DI Rated Multi meter / GFI Tester as needed Work shoes DI Rated Hard Hat Lock out/tag out Proper fiberglass ladder DI Rated DI Rated
4 PAINTERS SUPERVISOR/MANAGER: RICHARD MICKUS / KEVIN POLK REVISED: 06/30/2016 with side shields with side shields Paint scraping or coating removal Cuts and abrasions Dust Respirator Working with chemicals Painting baseboards or working close to ground Burns to eyes and skin Refer to SDS for list of required PPE for each chemical type Knee injury Other PPE Required with side shields as needed Knee pads Working around roads or parking areas Struck by vehicle Safety vests
5 CUSTODIAL OPERATIONS SUPERVISOR/MANAGER: RICHARD MICKUS/KEVIN POCK REVISED: 06/30/2016 Slip and fall from wet floor General Cleaning Wet floor Wet floor sign (mopping, bathroom sinks/tubs, walls, Exposure to blood borne pathogens and cleaning drinking fountains, etc.) Nitrile gloves agents General Floor Care (floor stripping, finishing, buffing, burnishing, etc.) Slip and fall from wet floor Splashes from or exposure to floor chemicals Slip and fall from wet floor Wet floor and nitrile gloves Wet floor sign as needed Cleaning Up Broken Glass Cut or laceration on hand Glass shard in eye Slip or fall on glass Slip and fall as needed High dusting and low dusting Safety goggles Nitrile gloves Working with swimming pool chemicals and Chemical burns and other hazards (See SDS) Face shield w/rubber gloves Working with or dispensing chemicals Chemical splash in eye Chemical exposure on skin Safety goggles Nitriles gloves
6 MAINTENANCE SUPERVISOR/MANAGER: SUE COONRADT REVISED: 06/30/2016 (power washers, drills, pumps, blowers, etc.) Working with glass (taping, removing, etc.) Electrical shock Injuries from stored or mechanical energy ARE DAMAGED OR UNDER REPAIR Glass shards from shattering glass Cuts and punctures Lock out/tag out Working with chemicals Cutting ceiling tiles, zip ties, etc. (use utility knife must be in good condition) Working on floors or close to ground (replacing outlet covers and other repairs) Changing lights (if working on ladders, use proper ladder size and ladder safety techniques) Burns to eyes and skin Refer to SDS for list of required PPE for each chemical type Cuts and lacerations Knee injury Hand Injury Cuts and lacerations Electrical shock Falling particles as needed lifting device Cut resistant work gloves Knee pads (as needed) Lock out/tag out if required
7 MASON SUPERVISOR/MANAGER: BRUCE MURRAY REVISED: 06/30/2016 Working with chemicals Tile work in bathrooms (cutting tiles, concrete, etc.) Working on floors or close to ground Ceiling repair Burns to eyes and skin Refer to SDS for list of required PPE for each chemical type s Breathing in particulates Blood borne pathogens Knee injury Overhead hazards Falling particles with side shields with side shields Respirator as needed as needed as needed Knee pads (as needed)
8 OPERATIONS AND GROUNDS MECHANICS SUPERVISOR/MANAGER: BRUCE MURRAY REVISED: 06/30/2016 NOTE: All the listed minimum PPE requirements are based upon OSHA regulations and best practices of Skidmore College. Ultimately, it is the employees responsibility to utilize the proper PPE for each task. The employee is not limited to these levels of PPE (e.g. levels may be Working on vehicles and Flying particles Use the right tool for the job with side shields Working with power tools, machinery or with side shields Grinding and cutting Flying particles Face safety shield Cuts and punctures Arc welding and Gas cutting Flying heated particles ARC WELDING: Ultraviolet and infrared rays GAS CUTTING: Heat, glare, and flying fragments of hot metals ARC WELDING: Ultraviolet and infrared rays when others are in vicinity Clothing catching fire Burn on hands Safety goggles and welding screen Welders Shield with filter glass Welders Shield with filter glass Welding screen Flame proof apron and fire retardant clothing Leather welding gloves as needed Hydraulic lift Flying particles Operate according to manufacturer instructions with side shields
9 BUILDINGS AND GROUNDS SUPERVISOR/MANAGER: BRUCE MURRAY REVISED: 06/30/2016 (blowers, chipper, riding mower, walk behind mower, weed whacker, power washers, road sweepers, etc.) Working with chain saws, power sheers, power pole pruners (work with a partner) Trash and Recyclables handling (removing trash bags from cans and rubbish shed) with side shields Cuts and abrasions Leather work gloves If dusty Electrical shock GFI Cords Injury from falling out of moving Wear seat belts (if available) Cuts and abrasions with side shields Leather work gloves Leg protection (chaps) Falling objects and high decibel noise with hearing protection Handling trash bags in Shed: Cuts and punctures Handling trash bags from receptacles Working outside in extreme temperatures Heat exhaustion / Heat Stroke Hypothermia / Frost bite as needed lifting device as needed Wear appropriate clothing to protect you against effects of extreme weather conditions. Flying objects in eyes Working with pruners and loppers Cuts, punctures and abrasions Leather work gloves Flying metal particles Refuse truck drivers Accidental movement of truck Wheel chocks Seat belts Working around roads or parking areas Struck by vehicle Safety vests
PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION
DRAFT SAMPLE WRITTEN PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION For Compliance With 1910.132 Wyoming General Rules and Regulations Wyoming Department
More informationHow many work-related eye injuries are there each day?
EYE SAFETY Common Eye Hazards Dust, concrete, and metal particles Falling or shifting debris, building materials, and glass Smoke and noxious or poisonous gases Chemicals (acids, bases, fuels, solvents,
More informationConducting a Job Hazard Assessment. Environmental, Health and Safety 275-3241
Conducting a Job Hazard Assessment Environmental, Health and Safety 275-3241 EH&S Programs: Fire Safety Blood Borne Pathogens Hazard Communication Personal Protective Equipment Emergency Preparedness General
More informationJob Hazard/Safety Analysis For the Lab Worker
Job Hazard/Safety Analysis For the Lab Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Lab Worker is a partial list of known task performed by the professional laboratory worker. We have placed
More informationJob Hazard/Safety Analysis For the Grounds Keeper
Job Hazard/Safety Analysis For the Grounds Keeper 1 INTRODUCTION Job Hazard/Safety Analysis for the Grounds Keeper is a partial list of known task performed by the professional grounds worker. We have
More informationPERSONAL PROTECTIVE EQUIPMENT (PPE)
Page 1 of 6 (PPE) Personal protective equipment (PPE) is used to protect an individual from hazards associated with their work tasks or environment. Specific types of personal protective equipment include
More informationSafe Operating Procedure
Safe Operating Procedure (Revised 11/15) PERSONAL PROTECTIVE EQUIPMENT (PPE) EYES AND FACE Introduction Eye and/or face is mandated by federal Occupational Safety and Health Administration (OSHA) standards,
More informationGEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical
More informationLab PPE Guide Examples of Personal Protective Equipment
Lab PPE Guide Examples of Personal Protective Equipment 1140 South Paulina St. 245 (PSB) Chicago IL 60612 Phone: 312-413-3387 Fax: 312-413-3700 www.uic.edu/depts/envh This document is to be used as a supplement
More informationJob Hazard/Safety Analysis For the Paint & Finish Worker
Job Hazard/Safety Analysis For the Paint & Finish Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Paint & Finish Worker is a partial list of known task performed by the professional paint and
More informationPersonal Protective Equipment Policy & Procedure Date: August, 2001 Approved by:
OCCUPATIONAL SAFETY AND HEALTH POLICY Topic: Personal Protective Equipment Policy & Procedure Date: August, 2001 Approved by: Author(s): Distribution: Cindy Davis, Risk Management; Ed Polluconi, EH&S;
More informationSAFETY in the work area is a broad topic because of the
A Safe Place to Work SAFETY in the work area is a broad topic because of the many components of agricultural mechanics. Safety is protection from injury or loss. Injury can result from improper use of
More informationJob Hazard/Safety Analysis For the Housekeeper
Job Hazard/Safety Analysis For the Housekeeper 1 INTRODUCTION Job Hazard/Safety Analysis for the Housekeeper is a partial list of known task performed by the professional housekeeper. We have placed task
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM
Sample Written Program For PERSONAL PROTECTIVE EQUIPMENT PROGRAM 1 TABLE OF CONTENTS Development... 3 Hazard Assessment........3 Choosing Personal Protective Equipment.......4 Training.......4 Conclusion...4
More informationTexas Department of Insurance. Provided by. Personal Protective Equipment. Division of Workers' Compensation HS96-101C (10-06)
Texas Department of Insurance Personal Protective Equipment Provided by Division of Workers' Compensation HS96-101C (10-06) PERSONAL PROTECTIVE EQUIPMENT PROGRAM TABLE OF CONTENTS Development...3 Hazard
More informationCompany Name Company Address Company Phone Number Company Fax Number
Job Hazard Analysis Plumbing Company Name Company Address Company Phone Number Company Fax Number Job/Task Plumbing fixture and piping Date Prepared: 08.04.2010 installation Project Name: Project Name
More informationWEEKLY SAFETY MEETING All Euramax Subsidiaries WELDING SAFETY / HOT WORK SAFETY. Safety Meeting Contents. Meeting Notice.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
More informationJob Hazard/Safety Analysis For the Building Maintenance Worker
Job Hazard/Safety Analysis For the Building Maintenance Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Building Maintenance Worker is a partial list of known task performed by the professional
More informationTech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)
Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety
More informationPersonal Protective Equipment Guidelines
Personal Protective Equipment Guidelines Purpose To establish guidelines for use and care of personal protective equipment, which is to be used by employees and /or students when a hazard is found to exist
More informationYou ve. life. ahead. you... So, safe. the of. job!
You ve So, got your play whole it safe life on ahead the of job! you... So, play it safe on the job! Getting a job anytime soon? Money isn t the only thing to think about. If you re under 18 and thinking
More informationGuidelines for the Use of. Personal Protective Equipment
Guidelines for the Use of Personal Protective Equipment Contents Introduction 1 Key Points on the Proper Use of Personal Protective 2 Equipment Safety Helmets 3 Eye Protectors 4 Ear Protectors 5 Respirators
More informationWelcome to the safe@work Automotive Module.
Welcome to the safe@work Automotive Module. Have you read the General Module, completed the test and gained your safe@work General certificate? The Automotive Module should be done AFTER the General Module
More informationDining Services OSHA Safety Training Program TRAINING RECORD
Dining Services OSHA Safety Training Program TRAINING RECORD Employee Title: This record documents the safety training received by Dining Services employees, including student employees, as required by
More informationSafety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
More informationJob Hazard/Safety Analysis For the Plumber
Job Hazard/Safety Analysis For the Plumber 1 INTRODUCTION Job Hazard/Safety Analysis for the Plumber is a partial list of known task performed by the professional plumber. We have placed the tasks in alphabetical
More informationPERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES
PERSONAL PROTECTIVE EQUIPMENT FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES OCTOBER 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE Section PURPOSE...1.0
More informationASBESTOS AWARENESS IN THE WORKPLACE. This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
ASBESTOS AWARENESS IN THE WORKPLACE This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the
More informationSafety and Health Policy and Procedure Manual. PERSONAL PROTECTIVE EQUIPMENT Section 0130. Table of Contents
Safety and Health Policy and Procedure Manual PERSONAL PROTECTIVE EQUIPMENT Section 0130 Table of Contents I. INTRODUCTION II. STANDARDS III. SCOPE IV. PURPOSE V. GENERAL REQUIREMENTS VI. EMPLOYEE OWNED
More informationPOSITION DESCRIPTION NORTHFIELD PUBLIC SCHOOLS September 2007
POSITION DESCRIPTION NORTHFIELD PUBLIC SCHOOLS September 2007 SECTION I: GENERAL INFORMATION Position Title: Custodian Engineer Department: Building & Grounds Immediate Supervisor s Position Title: Head
More informationToday s topic is Asbestos Safety. This training is a part of OSHA s Asbestos Standard (29 CFR 1910.1001).
Today s topic is Asbestos Safety. This training is a part of OSHA s Asbestos Standard (29 CFR 1910.1001). You will learn the: About the dangers of asbestos. How to identify asbestos. How to protect yourself
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Check/Service/Maintain/Repair/Install HVAC Equipment and Systems Job Title(s)
More informationAdditional information: -OSHA Instruction CPL 2.103, Field Inspection Reference Manual, Chapter IV, Section A -29 CFR 1910, Subpart I, Appendix B
1 Additional information: -OSHA Instruction CPL 2.103, Field Inspection Reference Manual, Chapter IV, Section A -29 CFR 1910, Subpart I, Appendix B -1910.1000(e) 2 1910.132(h) 72 FR 64341, Nov. 15, 2007
More informationE3902 Seeing Accidents Before They Happen Leader s Guide
E3902 Seeing Accidents Before They Happen Leader s Guide ERI PRODUCTIONS INC. SEEING ACCIDENTS BEFORE THEY HAPPEN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More informationSafety Training Topic PERSONAL PROTECTIVE EQUIPMENT
Safety Training Topic PERSONAL PROTECTIVE EQUIPMENT Purpose of Meeting To remind workers that using personal protective equipment (PPE) can protect them from serious injury. To reince PPE safety rules.
More informationPERSONAL PROTECTIVE EQUIPMENT POLICY & GUIDANCE
Health and Safety Policy PERSONAL PROTECTIVE EQUIPMENT POLICY & GUIDANCE ROYAL FREE HOSPITAL NHS TRUST & SCHOOL OF MEDICINE CONTENTS 1. SUMMARY OF THE REGULATIONS 2. INTRODUCTION 3. DEFINITION OF PERSONAL
More informationJob Hazard Analysis Manual. Updated 10/6/04
Job Hazard Analysis Manual Updated 10/6/04 Abrasive Cutoff Saw General Use Inhalation Dust/particles generated during machine operation Appropriate natural ventilation, disposable respirators, automatic
More informationMaster Workplace Inspection Checklist for General Shop Safety. MASTER WORKPLACE INSPECTION CHECKLIST General Shop Safety
Integrated Risk Management Master Workplace Inspection Checklist for General Shop Safety Document Type: Form Control Number: UIRM- FM_012_50 File Code: UIRM-001 Last Reviewed: March 2014 Department/Unit:
More information"ACCIDENT PREVENTION AND SAFETY HOUSEKEEPING"
MAJOR PROGRAM POINTS "ACCIDENT PREVENTION AND SAFETY HOUSEKEEPING" Part of the "GENERAL SAFETY SERIES" Quality Safety and Health Products, for Today...and Tomorrow Outline of Major Points Covered in the
More informationA short guide to the Personal Protective Equipment at Work Regulations 1992
A short guide to the Personal Protective Equipment at Work Regulations 1992 Health and Safety A short guide to the Personal Protective Equipment at Work Regulations 1992 Employers have basic duties concerning
More information15GAL STEEL OIL DRAIN WITH 110V PUMP
15GAL STEEL OIL DRAIN WITH 110V PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationTHERMIT WELDING (GB) LTD PROCESS MANUALS
THERMIT WELDING (GB) LTD PROCESS MANUALS SECTION FOUR GUIDELINES FOR SAFE OPERATION Page 1 SECTION 4 - GUIDELINES FOR SAFE OPERATION The information contained in this section is applicable to the THERMIT
More informationUnion County Public Schools. Facilities Department. Electrical. Safe Work Practices
1 Union County Public Schools Facilities Department Electrical Safe Work Practices 2 Purpose In accordance with OSHA Standards 1910.331-335, safety-related work practices shall be used by Union County
More informationCOST BENEFIT ANALYSIS
COST BENEFIT ANALYSIS WHAT IS A COST BENEFIT ANALYSIS? A cost benefit analysis, simply put, is the monetary or safety valuation of the risk of performing a task (or performing a task in a certain way)
More informationAsbestos WHAT TO DO? Studies of people who were exposed to high levels of asbestos in factories and shipyards, are at increased risk of:
Asbestos WHAT TO DO? What Is Asbestos? Asbestos is mineral fiber. It can be positively identified only with a special type of microscope. There are several types of asbestos fibers. In the past, asbestos
More informationTEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
More informationPersonal protective equipment (PPE) at work A brief guide
Personal protective equipment (PPE) at work A brief guide Introduction This leaflet describes what you, as an employer, may need to do to protect your employees from the risk of injury in the workplace.
More informationEmployee Safety Handbook
i Table of Contents I. Introduction Background.................. 1 Health and Safety Policy.................. 1 Health and Safety Responsibilities................. 1 Employees Responsibilities..................
More informationExample risk assessment for a motor vehicle mechanical repair workshop
Example risk assessment for a motor vehicle mechanical repair workshop Setting the scene The garage manager did the risk assessment. The business employed 12 mechanics, including two apprentices who carried
More informationTools for Orienting Worksite Supervisors About Teen Health and Safety
Tools for Orienting Worksite Supervisors About Teen Health and Safety A Packet for Youth Employment and Training Programs Youth employment and training programs are often legally responsible for ensuring
More informationA SELF-EVALUATION CHECKLIST of BEST PRACTICES for AUTO REFINISH SHOPS and SCHOOLS
A of BEST PRACTICES for AUTO REFINISH SHOPS and SCHOOLS www.epa.gov/dfe/pubs/projects/auto/ WHAT IS THE DESIGN FOR THE ENVIRONMENT (DFE) AUTO REFINISH PROJECT? The DfE Program has been working with the
More informationRisk Management Department Safety & Worker s Compensation Training Classes
Risk Management Department Safety & Worker s Compensation Training Classes The following safety and worker s compensation training is available from Risk Management and is scheduled by contacting the Risk
More informationSAFETY SELF-INSPECTION PROGRAM
Palm Beach State College Florida s First Public Community College SAFETY SELF-INSPECTION PROGRAM PALM BEACH STATE COLLEGE SAFETY SELF-INSPECTION PROGRAM 1. INTRODUCTION An important element of any employee
More informationUniversity of Glasgow School of Engineering UGRacing Formula Student Garage
University of Glasgow School of Engineering UGRacing Formula Student Garage James Watt South Building Level 4 CODE OF PRACTICE Emergency telephone number is 4444 Fire extinguishers located next to emergency
More informationXYZ Contract Company Industrial Hygiene Program
[This is an example of a general Industrial Hygiene program intended to help Industrial Hygienists in the development of a specific contractor IH program if one is not yet developed. It is not intended
More informationNew Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment
New Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment Included are the following: Personal information form Driver Back round Check Authorization
More informationFRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER
NUBIRA/LACETTI FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER 6 1 SECTION 6 FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER CONTENTS 1. FRAME DOOR OPENING........................................... 6 2 1.1.GENERAL
More informationA. a security guard B. a competent scaffold erector C. your boss D. the ship repair manager
01 If a worker is injured at work, he should. A. make sure it does not affect his work B. continue working until he is not able to C. go home to rest immediately without informing his employer or supervisor
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationCONTROL METHODS. There are five ways to control the release of asbestos fibers:
Control Methods CONTROL METHODS When asbestos containing materials are found in a building, the owner must decide which method or methods will be used to deal with the asbestos. The decision will be based
More informationNotes. Material 1. Personal Protective Equipment 2.
29CFR 1926.20(b)-Accident Reduction, 29CFR 1926.21- Safety Training & Education 29CFR 1926.20(a)-Unsafe Working Conditions 29 CFR 1910.132-138, the "Personal Protection Equipment" standard. & 20 CFR 1910.134
More informationXXII. Fiber Optic Safety Procedures
XXII. Fiber Optic Safety Procedures 22-1 Fiber Optic Safety Procedures 22A. Introduction This Program provides supervision, employees and safety managers with general safety rules, task safety procedures
More informationAPPENDIX A BUILDING MAINTENANCE MECHANIC D.O.T. CODE 899.381-010 O*NET CODE 49-9042.00
APPENDIX A BUILDING MAINTENANCE MECHANIC D.O.T. CODE 899.381-010 O*NET CODE 49-9042.00 This training outline is the current standard for Work Processes and Related Instruction. Changes in technology, regulations,
More informationOSHA RULES and SCENIC ARTS United Scenic Artists, Local USA 829, IATSE
DATA SHEET OSHA RULES and SCENIC ARTS Monona Rossol, Health and Safety Director United Scenic Artists, Local USA 829, IATSE 181 Thompson St., # 23 New York, NY 10012-2586 212/777-0062 E-mail:ACTSNYC@cs.com
More informationASBESTOS AWARENESS PLAN
Asbestos Operations and Maintenance Program ASBESTOS AWARENESS PLAN Bryan V. Jandreau, Facilities Manager Dan Bouchard, Superintendent of Buildings Christina Theriault, Human Resource Coordinator Developed
More informationMetal welding safety. Guidance Note. Practical advice for employers on controlling hazards when welding. June 2011. Background. How to use the table
Guidance Note Metal welding safety Practical advice for employers on controlling hazards when welding. June 2011 Background Metal welding involves the application of heat to join two metals together. The
More informationPROJECT HAZARD ASSESSMENT FORM CHEMICAL HAZARDS
PROJECT HAZARD ASSESSMENT FORM PI/SPONSOR: Completion of the following form will serve as a risk assessment, personal protective equipment (PPE) assessment and guide to required training for the activities
More informationStudent Shop Safety Policy GS92 Page 1
Policy Subject: Student Shop Safety Effective: 8/1/2012 Affected Area: Machine Shops on Campus Reviewed/Revised: 8/1/2012 1.0 Purpose, Applicability, and Scope 1.1 Purpose- This policy identifies the requirements
More informationCurtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.
Two General Safety Rule for CNC Machines Never operate a CNC machine without proper training or consulting the specific operator's manual for that particular machine and control type. Never attempt to
More information3053 Electrical Safety Training Program Course Outline
3053 Electrical Safety Training Program Course Outline The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting
More informationBloodborne Pathogens. Updated 1.21.13
Bloodborne Pathogens Updated 1.21.13 Purpose OSHA s Blood-borne Pathogens Standard protects anyone with a job-related risk of contracting a blood-borne borne disease The standard outlines preventative
More informationAutoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:
Autoclave Safety Purpose: Sterilization refers to the complete killing of all living organisms, including spores. Common sterilization techniques include the application of wet heat, dry heat, chemicals,
More informationOSHA Personal Protective Equipment Standard. Annual Training
OSHA Personal Protective Equipment Standard Annual Training This program was developed by: Environmental Health & Safety New York University 285 Mercer Street, 2 nd Floor New York, N.Y. 10003 (212) 998-1450
More informationNotes. Material 1. Tools the employee is expected to operate
OSHA Standard29 CFR 1910.211-.247, Subpart O, Machinery and Machine Guarding, and Subpart P, Hand and Portable-Powered Tools and other Hand- Held Equipment. Hand Tool Safety Preparation 1. Read Applicable
More informationLead Exposure Management Plan
Lead Exposure Management Plan 1.0. Policy CSUF has developed the Lead Exposure Management Plan to reduce occupational and environmental exposure to lead, a potent neurotoxin and carcinogen that causes
More informationEnvironment. Personal Protective Equipment Requirements for Photographic Processing Facilities. Kodak s health, safety, and environmental
Environment I N F O R M A T I O N F R O M K O D A K Personal Protective Equipment Requirements for Photographic Processing Facilities J-312 $10.00 Kodak s health, safety, and environmental Protecting employees
More informationPresented by: Rich Perry Marsh Risk Consulting
Flammable and Combustible Liquids Presented by: Rich Perry Marsh Risk Consulting What s the Big Deal? Flammable and combustible liquids are easily ignited Ignite with explosive force Burn readily and give
More informationDon t Spread Lead. A Do-It-Yourself Guide to Lead-Safe Painting, Repair, and Home Improvement
Don t Spread Lead A Do-It-Yourself Guide to Lead-Safe Painting, Repair, and Home Improvement Are you working on an older house? If you are working on a house built before 1978, read this booklet before
More informationAbrasive Wheel Grinder Safety
Abrasive Wheel Grinder Safety One of the most common pieces of machinery in use in the maintenance shops on campus is the abrasive wheel grinder. These useful machines, used to remove metal from flat and
More informationHealth, Safety, Environment and Community. Management System. Personal Protective Equipment PETROLEUM CSG HSEC MANAGEMENT SYSTEM PROCEDURE
PETROLEUM CSG HSEC MANAGEMENT SYSTEM PROCEDURE PERSONAL PROTECTIVE EQUIPMENT Petroleum HSEC Procedure No: Date: June 14, 2012 Revision: 2.1 Owner: Kim Phillips, Occupational Health and Hygiene Manager
More informationDocument the assessment, PPE selection, and training.
Requirements... 1 Hazard Control... 1 Supervisor Responsibilities... 2 How to Use This Website... 3 Step One - Assessment... 3 Step Two - Selection... 3 Step Three - Training... 4 Step Four - Documentation...
More informationAsbestos in your home
Asbestos in your home How to dispose of Asbestos safely Telephone Number: 01372 732000 contactus@epsom-ewell.gov.uk www.epsom-ewell.gov.uk If you would like a copy of this document in large print, on tape
More informationPPE hazard assessment
Oregon OSHA s quick guide to the PPE hazard assessment What you should know and not a word more! A Division of the Department of Consumer and Business Services About this guide Oregon OSHA quick guides
More informationPolicies and Procedures Issue Date (NAME) SAFE WORK PRACTICES Rev. Date
Purpose The Safe Work Practices Policy and Procedure provides (Co. Name) employees with the skills and knowledge to develop safe work practices around hazardous conditions in their offices and at their
More informationUI Procedures for Asbestos Management
UI Procedures for Asbestos Management The University of Iowa Rev.12/12/2012 These procedures apply to employees and contractors involving the identification, work on, removal, or repair of asbestos-containing
More informationCompletion Test Answer Key. 1. Why are young people more likely to be injured on the job than other groups of workers?
1. Why are young people more likely to be injured on the job than other groups of workers? They receive little or no safety training or supervision. They are reluctant to ask questions for fear of appearing
More informationPENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA
PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA Introduction Newton s (Sir Isaac Newton, English physicist, 1642 1727) First Law of Motion states that: An object at rest tends to stay at rest, and an
More informationTraining Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:
1910.1200 Hazard Communication HAZCOM 1910.147 The Control of Hazardous Energy, Lock-out/Tag-Out 1910.212 Machines, General Requirements 1910.305 Electrical, Wiring Methods, Components & Equip. 1910.132
More informationAPPENDIX A. Contamination (feet, leg, clothing, eyes, hands)
APPENDIX A Laboratory PPE Hazard Assessment Tool (This tool is available online at https://ehsis.yale.edu/ehsintegrator/survey/labppe) Check all Activities/Jobs/tasks that apply to your laboratory, and
More informationwww.suttonhousingpartnership.org.uk Asbestos
www.suttonhousingpartnership.org.uk Asbestos images courtesy of www.sxc.hu and/or www.morguefile.com Asbestos Asbestos was widely used until the 1980 s to improve the performance of materials and to provide
More informationCourse Title: Safety Issues in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Safety Issues in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
More informationCONTENTS. I. Scope... Page 2. II. Hazard Evaluation and Control... Page 2. III. Personal Protective Equipment Selection... Page 2
CONTENTS I. Scope... Page 2 II. Hazard Evaluation and Control... Page 2 III. Personal Protective Equipment Selection... Page 2 IV. Training... Page 3 V. Responsibilities... Page 3 VI. Personal Protective
More informationPortable Grinder. Given a properly adjusted portable grinder, instruction and demonstration of use, each student will be able to:
Portable Grinder I. Competencies Given a properly adjusted portable grinder, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the portable grinder. B.
More informationFALLING OBJECTS EXCESSIVE NOISE CHAINSAW & CHIPPER WORK AT HEIGHTS MANUAL HANDLING
JOB NO: PROJECT: DATE: SWMS NO: SWMS 001.1 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: December 2015 MINIMUM PERSONAL PROTECTIVE
More informationInjury Prevention for the Health Care and Social Services Industry
Injury Prevention for the The health care and social services industry is one of the largest and fastest growing sectors in Ohio s economy, employing approximately 13 percent of the workforce. This fact
More informationInjury Prevention for the Construction Industry
Injury Prevention for the Workers in the construction industry encounter a variety of hazards, some of which can lead to serious injuries and fatalities. This fact sheet: Increases awareness of the primary
More informationSITE CONTRACTOR PROCEDURES
SITE CONTRACTOR PROCEDURES Asset Collection Type B Assets are considered High risk ; the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment
More informationQuality Assurance Calendar Maintenance Responsible Party Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Generator fire up Generator 1 hour load test Generator 4 hour load test Fire extinguisher integrity checks Fire extinguisher certification Fire drills Fire door integrity Fire signage lighting Fire alarm
More informationCSAC Excess Insurance Authority EYE AND FACE PROTECTION Guidance and Best Practices
EYE AND FACE PROTECTION Guidance and Best Practices Introduction: Every day an estimated 1,000 eye injuries occur in American workplaces The financial cost of these injuries is enormous per Federal OSHA,more
More informationReducing Roofers Exposure to Asphalt Fumes
Reducing Roofers Exposure to Asphalt Fumes Department of Health and Human Services Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Reducing Roofers Exposure
More information