Safety Equipment (PPE)

Transcription

1 Safety Equipment (PPE) The complete range of Personal Protective Equipment

2 introduction QEP are delighted to reveal the new range of Vitrex Safety Equipment (PPE), with an improved packaging design and eye-catching wire frame head on the front of pack to demonstrate the products in use. a safe pair of hands Vitrex Safety is a concise, simplified range of fast moving PPE products - Respiratory, Eye Protection, Head Protection, Knee Protection, Gloves, Workwear & Safety Kits. The new Vitrex packaging has been designed to draw the consumer s attention and to make it as easy as possible for them to choose the most suitable product for that particular DIY job, with clear & concise information on the packs, easy to understand selling points, clear fitting instructions and a safety rating explanation. PPE products complement the extensive range of tiling & flooring installation equipment and accessories available from QEP. 2 THE WORLD S LEADING SUPPLIER OF TILING & FLOORING INSTALLATION EQUIPMENT

3 CONTENTS Respiratory Masks 4/7 contents Eye Protection 8/9 Ear Protection 10/11 Safety Kit 11 Gloves 12/13 Head Protection 14 Knee Protection 15/17 Work Wear 18 Display Stands 19 3

4 Respiratory Masks Vitrex offers an unrivalled range of respiratory products providing effective protection from many unseen hazards. To assist selection see information below, plus individual product details. respiratory Respiratory Standards Explained Respirators are available in a choice of FFP1, FFP2 and FFP3 versions. The higher the number the greater the level of protection offered (i.e. an FFP2 respirator will do the same as a FFP1, whilst providing additional protection over and above). Ranges of Moulded and Fold Flat Respirators have been expanded and updated to meet the latest EN149: A1:2009 FFP 1,2 or 3 NR Protects lungs against very fine toxic particles Protects lungs against fine toxic particles Protects lungs against fine non toxic particles 4

5 FOLD FLAT Respirators Pocket sized fold flat design for easy and hygienic storage +3 packs Sanding & Insulation Protects lungs against fine non-toxic particles Ideal for laying fibreglass insulation Suitable for sanding paint, softwood, brick dust, plastic & plaster EN149:2001+A1:2009 FFP1 NR Premium SANDING & INSULATION Protects lungs against fine non toxic particles, with breatheeasy valve for extra comfort Ideal for laying fibreglass insulation Suitable for sanding paint, softwood, brick dust, plastic & plaster EN149:2001+A1:2009 FFP1 NR Pack PREMIUM MULTI-PURPOSE Protects lungs against very fine toxic particles, with breathe-easy valve for extra comfort Ideal for use with MDF, hardwoods, fibreglass & most power tools Suitable protection from welding & smoke fumes, paint removal & toxic waste disposal EN149:2001+A1:2009 FFP3 NR packs POWER TOOL & MDF Protects lungs against fine toxic particles Ideal for working with MDF, softwood, hardwood, metal & concrete Suitable for use with most power tools: drills, saws, grinders, sanders, routers, etc EN149:2001+A1:2009 FFP2 NR PREMIUM POWER TOOL & MDF Protects lungs against fine toxic particles, with breathe-easy valve for extra comfort Ideal for working with MDF, softwood, hardwood, metal & concrete Suitable for use with most power tools: drills, saws, grinders, sanders, routers, etc EN149:2001+A1:2009 FFP2 NR Pack PREMIUM PAINT & ODOUR Protects lungs against fine non-toxic particles, with breathe-easy valve for extra comfort Charcoal filter provides relief from household odours & irritants Suitable for brush & roller application of most domestic paints & varnishes EN149:2001+A1:2009 FFP1 NR respiratory

6 moulded Respirators Ergonomically designed moulded masks for an airtight seal respiratory Sanding & Insulation Protects lungs against fine non-toxic particles Ideal for laying fibreglass insulation Suitable for sanding paint, softwood, brick dust, plastic & plaster EN149:2001+A1:2009 FFP1 NR POWER TOOL & MDF Protects lungs against fine toxic particles Ideal for working with MDF, softwood, hardwood, metal & concrete Suitable for use with most power tools: drills, saws, grinders, sanders, routers, etc EN149:2001+A1:2009 FFP2 NR PREMIUM Sanding & Insulation PREMIUM power tool & mdf +3 packs Protects lungs against fine non toxic particles, with breathe-easy valve for extra comfort Ideal for laying fibreglass insulation Suitable for sanding paint, softwood, brick dust, plastic & plaster +3 packs Protects lungs against fine toxic particles, with breathe-easy valve for extra comfort Ideal for working with MDF, softwood, hardwood, metal & concrete Suitable for use with most power tools: drills, saws, grinders, sanders, routers, etc EN149:2001+A1:2009 FFP1 NR Pack EN149:2001+A1:2009 FFP2 NR Pack PREMIUM multi-purpose PREMIUM Paint & Odour +3 packs Protects lungs against very fine toxic particles, with breathe-easy valve for extra comfort Ideal for use with MDF, hardwoods, fibreglass & most power tools Suitable protection from welding & smoke fumes, paint removal & toxic waste disposal +3 packs Protects lungs against fine non toxic particles, with breathe easy valve for extra comfort Charcoal filter provides relief from household odours & irritants Suitable for brush & roller application of most domestic paints & varnishes EN149:2001+A1:2009 FFP3 NR Pack EN149:2001+A1:2009 FFP1 NR Pack

7 re-usable Respirators Twin Filter respirator Vapour Filters (x2) High performance respirator with replaceable P2 twin filter pads Flexible thermoplastic face piece for optimum comfort One piece head harness with elasticated strap for easy and secure fit Protects lungs against fine toxic particles Ideal for use with: MDF, hardwoods, fibreglass insulation and most power tools EN , EN143:2000 FFP Replacement Filter Pads (x4) To fit Twin Filter Respirator Protects lungs against fine toxic particles Suitable for use with most power tools: drills, saws, grinders, sanders, routers, etc. Ideal for use with: softwood, hardwood, MDF, metal and concrete EN143:2000 FFP Disposable Respirators cup masks Comfort mask, provides relief from coarse, non-toxic particles Suitable for nuisance dusts & pollens Item No. Description Barcode Qty Pack Pack Pack To fit Twin Filter Respirator Protects lungs against most organic vapours found in DIY spraying applications (see pack for details) Can be used in conjunction with Vitrex Replacement Filter Pads EN141:2000 A MULTI PURPOSE FILTER (x2) To fit Twin Filter Respirator Protects lungs against very fine toxic particles Suitable for protection from welding fumes and when removing paint Ideal for use with: MDF, hardwoods, fibreglass insulation and most power tools EN143:2000 FFP respiratory

8 Eye Protection Eye protection packaging incorporates a unique application guide designed to inform and aid easy consumer selection. For further information see symbol key (below) and individual product details. eye protection Safety Spectacles Premium Safety Spectacles Clear polycarbonate lens Impact and abrasion resistant Suitable for various applications including woodwork, home renovation and for use with most domestic power tools Clear polycarbonate lens, with ventilated side arms Impact and abrasion resistant Suitable for various applications including woodwork, home renovation and for use with most domestic power tools Suitable for Applications: 1, 2, 3, 4, 5, 6, 7 8 Suitable for Applications: 1, 2, 3, 4, 5, 6, 7 Item No. Spec Barcode Qty Item No. Spec Barcode Qty EN EN

9 eye protection Safety Goggles Impact resistant, clear polycarbonate lens Indirect ventilation for protection against dust and liquid splash Suitable for various applications including woodwork, home renovation, painting and for use with most domestic power tools Premium Safety Goggles Impact and abrasion resistant, clear polycarbonate lens Indirect ventilation offers mist free vision, plus protection against dust and liquid splash Suitable for various applications including woodwork, home renovation, painting and for use with most domestic power tools Suitable for Applications: 1, 2, 3, 4, 5, 6, 7, EN Suitable for Applications: 1, 2, 3, 4, 5, 6, 7, EN eye protection Premium wraparound Safety Goggles Large frame with wide angle vision, impact and abrasion resistant, clear polycarbonate lens Indirect ventilation offers mist free vision, plus protection against dust and liquid splash Suitable for various applications including woodwork, home renovation, painting and for use with most domestic power tools Suitable for Applications: 1, 2, 3, 4, 5, 6, 7, EN

10 Ear Protection Packaging incorporates the following application guide, the details of which are applicable to all Vitrex ear protection products. For further information see individual product details. ear protection Ear Protectors Ear Caps with Foldable Headband Lightweight design with foam padded cups for extended use Fully adjustable contoured headband (one size fits all) Suitable for use with power tools, fibreglass & woodwork Folds for convenient pocket storage Multi-positional design which can be worn over the head, under the chin or behind the neck Supplied complete with 2 pairs of replacement caps Suitable for use with power tools, fibreglass & woodwork and folds for convenient pocket storage EN 352 part EN 352 part

11 ear protection Corded Ear Plugs (x2 pr) Tapered Ear Plugs (x5 PR) Disposable foam ear plugs with cord, shaped for easy insertion Smooth outer surface for better hygiene & corded to prevent accidental loss or dropping when in use Suitable for use with power tools, fibreglass & woodwork EN 352 part Disposable foam ear plugs, shaped for easy insertion Smooth outer surface for better hygiene and easy to insert & remove Suitable for use with power tools, fibreglass & woodwork EN 352 part pack safety kit Vital eye, ear, hand & lung protection. Suitable for use with power tools, fibreglass, ceramics, concrete & woodwork. Ideal for home renovation, loft insulation, gardening, cutting & general maintenance. KIT CONTAINS Sanding & Insulation Respirator P Safety Goggles Builders Grip Gloves Tapered Ear Plugs Goggles Respirator EN166 EN352 Part 2 EN 149: 2001 & A1:2009 FFP1 NR Safety Kit EN388 Builders Grip Gloves Ear Plugs EN/ANSI Approved

12 Gloves INTERMEDIATE SAFETY CATEGORY In accordance with EN420 General requirements for gloves. MECHANICAL HAZARDS EN388 Details test results relating to the following parameters: Test Range a. Resistance to abrasion 0-4 b. Resistance to blade cut 0-5 c. Tear resistance 0-4 d. Resistance to puncture 0-4 A higher score relates to higher performance. Builders Grip Thermal grip gloves Washable glove with latex coated palm for non-slip grip Ideal for various building projects & handling rough materials such as brick, slabs, etc Ideal for various outdoor projects including handling slippery objects & rough materials Washable glove with latex coated palm for extra grip Ideal for working in cold conditions Ideal for various outdoor projects including handling slippery objects & rough materials EN EN

13 hand protection PVC Cut resistant 4121 Tough, flexible palm PVC coated glove with knitted wrist Suitable for general handling maintenance & assembly Ideal for working in wet, oily conditions 4542 Provides a high a level of cut protection whilst giving the wearer maximum dexterity Suitable for sharp-edge steel & glass handling, building & construction areas, mechanical assembly lines, etc. High strength & lightweight core filaments for dependable, long lasting cut protection EN EN high dexterity decorators 4121 Tough, flexible palm coated glove Keep hands clean when painting or using harsh chemicals Ideal for painting and sanding down in areas where there is no risk of skin exposure to toxic substances 2121 Lightweight, comfortable glove made from polyester Keep hands clean when painting or using harsh chemicals Ideal for painting and sanding down in areas where there is no risk of skin exposure to toxic substances EN premium Rigger EN premium Builders grip gloves Heavy Duty rigger with excellent resistance to abrasion and tearing. Suitable for various do it yourself projects including building work, gardening etc. Premium quality chrome leather palm, knuckle strap and finger tips 3243 Excellent grip in both wet and dry conditions for safe and secure handling Ideal for various building projects & handling rough materials such as brick, slabs, etc Latex coated palm offers superior resistance to tearing, puncture & abrasion N/A EN

14 Head/Face Protection safety Helmets Safety Shield High density, polyethylene safety helmet with sweatband for extra comfort Ideal for various do it yourself projects including, building work, structural repairs, tree cutting and lopping. Adjustable internal harness to fit most head sizes and comfortable to wear Item No. Description / Spec Barcode Qty White / EN Yellow / EN Impact resistant, clear polycarbonate visor Suitable for use with most domestic power tools, garden strimmers, hedge cutters etc. Adjustable face shield can be in locked position, with convenient nod down facility EN Replacement Visor Forestry Kit Combination Visor Kit Head/face protection Vital eye, ear, face and head protection, ideal for use with electric and petrol operated chain saws Lightweight impact resistant helmet with rain gutter for use in exposed conditions High performance ear muffs guard against the excessive noise of outdoor power products Vital eye, ear and face protection, suitable for use with most garden power tools, including, hedge cutters, strimmers, etc High performance ear muffs guard against excessive noise of outdoor power products Impact resistant clear polycarbonate visor offers excellent all round vision, plus convenient flip-up facility EN397 (Helmet), EN352 Part 3 (Ear Muffs), EN1371 (Carrier) EN352 Part 1 (Ear Muffs), EN166 (Visor)

15 Knee Protection CertifIED To EN14404 CLASS 1 TYPE 1 100% pure GEL cushion Unique ribbed design with integral air cell for maximum comfort Key improvements made by Vitrex to achieve EN14404 approval: Reworking of pad and cap size to improve the overall zone of protection Addition of an extra full length protective layer of puncture resistant K-TARP behind the main cap An improved adjustable strap in comfortable neoprene material with hook and loop fastening Label on each knee pad showing company details, size, left/right knee marking, classification (Type1, Class 1) User information leaflet with full details including fitting and safe use Gel CUSHION TECHNOLOGY Breathable Outer Lining Soft Foam Inner Lining 100% Pure GEL Cushion Air Cell High Density Foam Tough Outer Facing K-TARP Puncture Resistant Layer Removable Cap Removable shock-absorbing cap 1 2 The professional way to do it yourself The professional way to do it yourself GEL G-Shok Knee Pads 100% pure gel cushion with unique ribbed design for maximum comfort Unique K-TARP puncture resistant layer, ideal for most applications including general construction, use on uneven surfaces, or for laying carpets, floor tiles, vinyl flooring etc. Convenient 2-in-1 design with sturdy boot style cap which provides increased stability and can be removed for indoor use Knee protection Conforms to EN14404 Class 1 Type

16 Knee Protection GEL foam is air injected and moulds perfectly to the contours of the knee. GEL foam also contains anticompression agents and always returns to its original shape. Gel AIR TECHNOLOGY Gel Swivel Cap Knee Pads Breathable Outer Lining Soft Foam Inner Lining Air Injected GEL Foam Air Cell High Density Foam Air injected GEL foam for increased comfort and longer life Unique K-TARP puncture resistant layer, ideal for use on laminate flooring, carpets, floor tiles, vinyl flooring etc. Hard swivel cap for easy movement Tough Outer Facing K-TARP Puncture Resistant Layer Outer Cap Conforms to EN14404 Class 1 Type GEL Grippa Cap Knee Pads Mini GEL Knee Pads Knee protection Air injected Gel foam for increased comfort and longer life Unique K-TARP puncture resistant layer, ideal for roofing work, general construction and use on concrete or uneven surfaces Industrial strength, slip resistant grippa cap Air injected GEL foam for increased comfort and longer life Super light design perfect for indoor/outdoor use Next generation mini GEL technology with adjustable elasticatd strap Conforms to EN14404 Class 1 Type Conforms to EN14404 Class 1 Type

17 Knee Protection Contractor knee Pads Rigid nylon shell with removable inner padding and central hinge allowing pads to flex with the knee Ideal for building work, laying floor tiles, carpet/laminate flooring, car maintenance, welding etc. Fitted ribbed section for excellent stability and thick soft breathable inner padding N/A Hard cap knee pads Heavy Duty comfort Pads Hard cap GEL knee pad with a non-slip cap GEL insert absorbs impact for extra comfort Super light design perfect for indoor/outdoor use with adjustable elasticated strap N/A Durable waterproof lightweight foam pads for extra comfort Adjustable elasticated strap with hook and loop fastening Ideal for laying carpet/laminate flooring, loft insulating, gardening, car maintenance etc N/A flooring knee Pads Slip resistant pad ideal for tiled floors and other hard floor surfaces including wood and vinyl Comfort form fitting foam padding with non-binding single strap, will not pinch during extended wear Easy on & off adjustable, no hassle plastic buckle N/A Knee protection 17

18 Work Wear Protective Cover Suit Suitable for various applications including building work, painting & decorating, tiling, loft insulation, car maintenance, etc Resistant to non-toxic chemicals and light liquid splash Elasticated hood, waist, cuffs & ankles with zip Fastening Breathable & lightweight 100% non-woven polypropylene fabric for increased user comfort Generously cut to fit over an protect normal clothing One size fits all Item No. Description Barcode Qty Cover suit

19 Display Stand Options The Vitrex floor standing display units are the perfect vehicle for fast moving lines off fixture. They allow neat and attractive product merchandising for the Safety Equipment range including hanging packs and loose products. 1 metre display Vitrex has a complete range of merchandising methods to help display the Safety Equipment range attractively and encourage sales. Ideal for fast moving lines, the floor standing display units and bespoke space planograms maximise retail space, as do ready packed counter display units and clip-strips. 19

20 Everest Road, Lytham St. Annes Lancashire FY8 3AZ England T: +44 (0) , F: +44 (0)