Silica Bead. I have very oily. handle this?

Transcription

1 Silica Bead I have very oily formula How to handle this?

2 Silica Bead in Skin Care Pearlescent 4.18% A Radiance Cream Maximum Radiance Cream skin care gets skin glowing, revealing its original radiance, maximize luminosity. A Moisturizer For Oily Skin Active Anti-Shine Moisturizer A unique formula that absorbs and regulates excess shine An Whitening Cream Power Whitening Essence Now, shatter the look of dark spots with pinpoint accuracy this silky opalescent serum helps prevent future discoloration UV essential SPF45, PA+++ This high protection skincare products has a wonderfully soft texture. It offers a velvety, powdery, sheer finish. The secret of its texture: a combination of two powders 3um Silica 5% 8um Silica 3.58% 8um PMMA 1.58% Whitening Moisture Sun Care Radiance Shine Control Night Cream Eye Care Anti Wrinkle 8um Urethane Bead 4% 8um Silica, PMMA Active Anti-Shine 3.86% Moisturizer regulates excess shine with matifying technology Moisturizes without adding excess oil 13um Urethane Bead 20% 4um Silica 2.86% A Night Cream Anti-Age Retexturing Night Cream Ultra-nourishing renewal night cream An Anti Wrinkle Cream Correcting serum for Lines/Wrinkles/Age Spot Instantly see up to a 29% reduction in fine, dry lines. An Eye Care Cream Visibly Rejuvenating Eye Care Bags and dark circles are less visible. wrinkles are diminished and the eye area looks visibly younger.

3 Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 3 Silica Beads for Skin Care SUNSIL 130 series approved by ECOCERT, Natural Origin Silica Beads Porous SILICA BEADS Grade Descriptions Avg. Particle size( μm ) Oil Absorptio n(cc/g) SUNSIL 20 Porous Silica 2 0.9~1.3 SUNSIL 130L Porous Silica 7 0.6~0.9 SUNSIL 130 Porous Silica 7 0.9~1.3 SUNSIL 130H Porous Silica 7 1.3~1.7 SUNSIL 130SH Porous Silica 7 2.1~2.6 SUNSIL 150H Porous Silica ~2.1 Non Porous SILICA BEAD Grade Descriptions size( μm ) (cc/g) SUNSIL 130NP Non Porous Silica 7 0.3~0.6 Powdery Dry Feel Velvety Feel Natural Micro Bead

4 Low Medium High Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 4 How to select Silica Beads? As to sensory feel, it is said that the smaller silica beads feel wetter while the larger silica beads feel drier Sebum Control = f(oil Absorption) Sensory Feel = f(particle Size) So the small size beads suit more for skin care while bigger beads for make-ups Oil Absorption Make-up - 150H & 130H for the most dry and silky feel for make-ups Skin Care SUNSIL 20 - Smooth Feel - Moisturizing Feel - Too small for make-ups SUNSIL Flagship product - All-round player Skin Care - 130L for moderate sebum control 2um 7um 15um Particle Size

5 Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 5 Silica Beads for Body Lotion SJF-1124-Velvet Feel Body Lotion-ver.1.0 Part Chemical Name % D.I-Water 59.2 A B C D Carbopol 940 1% sol Glycerin 10.0 Peaster Myristic Acid 2.0 Arlacel DC 200F/10cs 0.5 Finsolv TN 0.8 Arlacel Lanette O 0.5 Vitamin E Acetate 0.1 D.I-Water 1.0 TEA 0.2 Fragrance 0.2 Optiphen 0.5 SUNSIL Moisturizing feel, surprisingly silica bead enhance moisturizing feel of body lotion a lot

6 Viscosity Viscosity Viscosity Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 6 SUNSIL series, compatible with various thickeners SUNJIN provides Thickener compatible Natural Silica Beads for skin care 1) CARBOPOL 940 2) SEPIGEL 305 3) ARISTOFLEX AVC 44,000 45,000 16,000 17,300 10,500 9, % in water neutralized by TEA 1% in water 0.4% in water 0% 5% SUNSIL 130 0% 5% 130 added 0% 5% 130 added SUNSIL series are highly purified to remove ionic components and not to disturb polymeric thickeners SUNSIL series are natural, i.e. of ECOCERT approval. Polymeric Micro Beads such as nylon bead, urethane bead, PMMA bead, etc. are of synthetic polymeric origin so can not be natural

7 Silica Bead for Make-ups Recommended for CREAM TO POWDER Oil-based so they look creamy and greasy in the pan but actually go on matte and powdery Marketing claims of silica beads: Natural Finish Matting Less Oily Not Greasy Powdery Non-Transfer Extra Wear Smooth Full Extension Curving for Mascara To reduce other gellyfing agents and waxes that could have a negative impact on the texture. Super High oil absorption silica can help to reduce sweating & cracking in poured products and sticks LIP STICK The absorption properties can also reduce the sweating and cracking in poured products and sticks, so to avoid undesired halos on the surface Pressed POWDER Silica can Modulate pay-off in compact powders Low oil absorption silica, not absorbing binder too much so used in loose and pressed powders LOOSE POWDER Long lasting matte finish in loose powder MASCARA Full extension curving, lengthening and thickening

8 Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 8 SUNSIL 130SC series Methicone Coated SILICA BEADS Grade Descriptions size( μm ) (cc/g) SUNSIL 130LSC Hydrophobic Silica 6~9 0.6~0.9 SUNSIL 130SC Hydrophobic Silica 6~9 0.9~1.3 SUNSIL 130HSC Hydrophobic Silica 6~9 1.1~1.7 SUNSIL 150HSC Hydrophobic Silica 10~15 1.2~2.0 Hydrophobical coating improves Better skin adhesion, Better skin spread Better tactile properties More compatiable with oily binder Ease of press Reduce breakage by drop Long lasting Surface treated Silica Beads from SUNJIN, Very price affordable, only a few $ more expensive than the untreated silica beads

9 Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 9 Surface Treated Silica Beads: Wet coating vs. Dry Coating Wet Coating SUNJIN Making silica bead and doing surface treatment in situ Surface treated Silica bead Coating material < 2.5% 1 STEP CUSTOMERS Wet Coating is Technically Superior, Cheaper price, Faster delivery Wet coating process is technically superior to dry coating process in terms of uniformity of coating(i.e. better surface treatment, stronger hydrophobicity. SUNJIN has been doing 1step wet coating since its first production of surface treated silica beads Dry Coating Other SILICA MAKERS Making silica bead Silica bead Doing surface treatment separately SURFACE TREATMENT COMPANY 1 st STEP Surface treated 2 nd STEP Silica bead Coating material > 5% CUSTOMERS As silica is very porous, it absorbs quite a lot of coating material during dry coating process. Thus, the dry coated silica has much higher content of coating material as compared to silica bead via wet coating process Dry coating process typically involves two different entities, i.e. a silica bead maker and a surface treatment provider

10 Copyright 2014 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 10 Silica Beads for Make-ups SUNJIN s silica beads do not have crushed fragments or oversized agglomerates because SUNJIN completes 325 mesh screening during the SUNSIL No Broken Silica pieces found manufacturing process. COMPETITOR S Broken Silica pieces found