Heat Seal Lacquers Product Catalogue

Transcription

1 Heat Seal Lacquers Product Catalogue

2 Universal Heat Seal Lacquers for Aluminium Foil Product Nr. Characteristics / Application Composition Seal Partner HS-346 Excellent performance (hot-tack, filling good resistance) Contains PVC and BPAbased and product tin plate HS-356-N Excellent performance (hot-tack, filling good resistance) Contains BPA- based product, PVC non HSC Special type for coffee pods (PP), suitable for machines with low drying capacity non HS-700-TR-90 (HS- 700-DA) Good hot tack and filling good resistance (HS-700-DA: cost-effective version) Contains PVC, BPA non HM-170-E55 Good hot-tack and filling good resistance BPA and PVC non HSC-532 Moderate hot-tack and filling good resistance, suitable for machines with low drying capacity non, PE HS-500-KFG-M All these products may Moderate be used hot-tack as two and layer filling systems good resistance. with a primer on the aluminium Contains foil to Epoxy, reduce PVC porosity free and PS, to PP, improve PVC, APET resistance to (HS-500-KFG-B) aggressive filling goods. (HS-500-KFG-B: cost-effective version) For example: HM : PVC- containing primer SL-819-N-231: Polyester based primer which needs stoving to crosslink T +49 (0) , info.actega.rhenania@altana.com, 2 von 5

3 Heat Seal Lacquers for Aluminium Foil Product Nr. Characteristics / Application Composition Seal Partner HM-016-A (clear) Standard heatseal coatings for Pharma blister foil sealing to Contains PVC, BPA non PVC, PVDC, APET, PS HM-050 (opaque) PVC/PVDC blister and yoghurt lids sealing to PS cups HM For container lids and body, sterilization-resistant Contains PVC, BPA non PVC and to itself HS-585 For yoghurt lids sealing to PS cups PVC and BPA non PS HM M For aluminium hard foil to seal to PP, for Aluminium lids to seal to PVC and BPA non PP and PE PP and PE, very good filling good resistance HL-150-IT For container lids and body, sealing to itself. For Aluminium lids sealing to APET non APET, PVC, aluminium trays and to itself HS-390-H For aluminium top cover foil to seal to unlacquered tin plate Contains PVC Tin plate, PVC and to itself TN-111-F For lids sealing to PP- laminated trays, sterilization-resistant Based BPA-based product and high PP on Epoxy, needs high PMT ( peak metal temperature ) boiling solvents HM For lids sealing to PP- laminated trays, sterilization-resistant BPA- BPA non, high boiling PP non, needs high PMT ( peak metal temperature ) solvents HS-389 For Chocolate Wrapper, low seal initiation PVC and BPA non To itself SC-007 Interior sealable coating for Spiral Wound Composite Cans (high slip) PVC and BPA non To itself SL-958/SL-959 Two layer system (SL-958 as primer, SL-959 as heat seal coating) for processed cheese foil, low seal initiation Contains PVC, BPA non To itself T +49 (0) , info.actega.rhenania@altana.com, 3 von 5

4 Heat Seal Lacquers for Plastic Films and Paper Product Nr. Characteristics/Application Composition Substrate Seal Partner HSC-274 Yoghurt lids on PS- cups, high seal Contains PVC Paper- or Alu/PETlaminate PS, APET, PVC HSC-174 High seal, especially for Alu/PET- laminate, also for Paper/PET- Contains PVC Polyester film, PS, APET, PVC laminate (can be used with higher coatings weights than HSC- 274 if required) Alu/PET- or Paper/PET- Laminate HM Yoghurt lids on PS- cups, low medium seal performance PVC non Paper- or Alu/PETlaminate PS HSC-158 Yoghurt lids on PS- cups, low medium seal performance, higher PVC non Paper- or Alu/PETlaminate PS solid content / better hot-tack than HM HSC-150 For PET to APET- trays PVC non Polyester film APET, aluminium trays and to itself HSC For nearly transparent / translucent lids PVC non Polyester film PS, PP, APET HSC-500-HV HSC For opaque lids on PP- trays, seals also to PE Polyester needs Corona treatment For opaque lids on PP- trays and PS- and PP- cups. Higher seal strength than HSC-500-HV and HSC PVC non PVC non Polyester film with Corona treatment; CoexOPP Polyester film, Alu/PET- or Paper/PET- laminate PS, PVC, PP, APET, PE PS, PVC, PP, APET, PE HSC Alternative to extrusion coating (PE) on cardboard PVC non Cardboard PS, PP, PE and itself T +49 (0) , info.actega.rhenania@altana.com, 4 von 5

5 Haftungsausschluss / Disclaimer Copyright 2014 ACTEGA Rhenania GmbH. Alle Rechte vorbehalten. Alle Texte, Bilder, Graphiken, Warenzeichen, Marken und Logos unterliegen dem Urheberrechtsgesetz und anderen Gesetzen zum Schutz geistigen Eigentums. Jede Verwertung außerhalb der rechtlichen Grenzen, insbesondere jede Vervielfältigung, Übersetzung und Veränderung, ist unzulässig. Die Informationen und Angaben auf diesen Seiten oder sonstige Informationen wurden von ACTEGA Rhenania GmbH nach bestem Wissen erstellt. Sie stellen aber keine Garantie oder Zusage betreffend der Beschaffenheit und Eignung für bestimmte Zwecke dar und entbinden den Nutzer nicht von der Durchführung eigener Untersuchungen und Tests. Änderungen bei Produkten, Leistungen, Lieferbedingungen und Preisen bleiben vorbehalten. Copyright 2014 ACTEGA Rhenania GmbH. All Rights Reserved. The texts, images, graphics, trademarks, brands and emblems are all subject to copyright and other intellectual property protection. Any use beyond law, in particular but not limited to duplication, translation and modification is illegal. The information and specification published on these sites are given to the best of ACTEGA Rhenania GmbH knowledge. All this information shall not, however create any guarantee or representation with regard to characteristics and fitness for any particular purpose and shall not relieve the user from undertaking its own investigations and tests. Products, services, delivery terms and prices are subject to alteration without prior notice T +49 (0) , info.actega.rhenania@altana.com, 5 von 5