PCB ROUTER AMS. USA Call +1 (619) , Siempre viva Rd. Suite J, San Diego CA 92154, United States.

Transcription

1 PCB ROUTER USA Call +1 (619) , Siempre viva Rd. Suite J, San Diego CA 92154, United States Manufactured by IMPEC

2 PRS-2000S 1 head / 1 table Stepping Motor Stand-Alone Router 600mm 800mm 1,500mm Approx 250Kg Drive method 3 axis Micro stepping Cutting accuracy ±0.1mm Cutting speed 0~100mm/sec Table travel X:305, Y:370, Z:80(mm) Work area 300mm x 300mm PCB thickness 0.5~2.5mm Program data 96 memory (256step) MDI, Jog & MPG Voltage 50/60Hz, 2.0KVA 6 bar(90 psi) 150L/min IMPEC robot control TFT Touch screen and MPG handle function RS232C PC Communications Features Bit life cycle check Bit auto step down User password protection Sefety sensor Sefety door sensor Dust life dispelay Motor High speed spindle motor Rotation Adjustable 40,000 rpm Tool change Manual Motor Type Blower motor Power 1.3Kw Bag filter Polyester teflon Voltage 220V, 1Phase Ionizer unit Fool proof sensor External Teaching vision unit Low Cost and suitable for lean line Compact robot and Stand-alone(Off-line) Type High Quality and Minimizing the stress on PC Board Routing Touch screen direct teaching & MPG Bit Auto step down for each model Fast & Accurate Movement and routing by Micro Stepping motor Internal dust collecting capability Life cycle checking for Bit Very Safe Operation by sefety control

3 PRS-3000S 1 head / 1 table Servo Motor Stand-Alone Router 725mm 820mm 1,650mm Approx 250Kg Drive method AC servo motor driving Repeatability ±0.01mm Cutting accuracy ±0.1mm Cutting speed 0~100mm/sec Table travel X:400, Y:400, Z:100mm Work area 350mm x 300mm PCB thickness 0.5~2.5mm Program data 96 memory (256step) MDI, Jog & MPG Voltage 50/60Hz, 1.5KVA 6 bar(90psi) 200L/min IMPEC robot control TFT Touch screen and MPG handle function RS232C PC Communications Software Features Bit life cycle check Bit auto step down User password protection Sefety sensor Sefety door sensor Dust life dispelay Motor High speed spindle motor Rotation Adjustable 450,000 rpm Tool change Manual Power 150~350W Power 1.5Kw(1.9Kw) Motor Blower motor Filter Polyester a teflon Voltage AC380V, 3Phase or 50/60Hz, 2.0KVA Ionizer unit DC or Frequency power Fool proof sensor Laser sensing Auto Shaking Teaching vision unit CCD camera vision direct teaching High Quality PCB Routing Extremely fast cutting speed by high-speed spindle unit Compact and stand-alone type by easy maintenance Highly effective dust-removal by bottom side dust collecting unit Easy cutting point teaching by vision & MPG handle Bit life cycle checking & fool proof checking functions Very safe operation by sefety control and CE marked

4 PRS-3000D 1 head / 2 table Servo Motor Stand-Alone Router 1,100mm 1,150mm 1,630mm Approx 400Kg Drive method Multi AC servo motor X, Y1, Y2 and Z axis Servo Repeatability ±0.01mm Moving speed 1,000mm for each axis Router speed Up to 100mm/sec Work table Two work Work area 350mm x 300mm PCB thickness 0.4~2.4mm TFT Touch screen direct teaching or MPG handle function Progarm data 96 memory (256 step) MDI, JOG Router Dust Collector 50/60Hz, 2.0KVA AC 220V/380V, 3Phase 50/60Hz, 1.5VA 6 bar(90psi) 200L/min IMPEC Routing control software TFT Touch screen RS232C PC Communications Software Features Bit life cycle check Bit auto step down User password protection Sefety sensor Type High speed spindle motor Rotation Adjustable 50,000 rpm Cooling Air cooling Tool change Manual/ATC (Option) Auto digital control type Power 1.5Kw~ Filter Polyester filter 230mmAq~ Noise level 68 ± 3dB Ionizer System Auto Shaking System Fool proof checking Teching vision unit Auto W axis motion Multi Spindle head unit User design jig type Compact robot and Stand-alone(Off-line) Type High Quality and Minimizing the stress on PC Board Routing Muiti Spindle head and two work base table 2-way sliding exchanger provides a simultaneous and individual operation Touch screen direct teaching & MPG Bit Auto step down for each model Fast & Accurate Movement and routing by Ac servo motor Powerful dust collecting capability Life cycle checking for Bit Very Safe Operation by sefety control

5 PRS-3100D 1 head / 2 table Servo Motor Stand-Alone Router 1,100mm 1,150mm 1,630mm Approx 800Kg Drive method Multi AC servo motor X, Y1, Y2 and Z axis Servo Repeatability ±0.01mm Moving speed 1,000mm for each axis Router speed Up to 100mm/sec Work table Two work Work area 350mm x 300mm PCB thickness 0.4~2.4mm TFT Touch screen direct teaching or MPG handle function Program data 96 memory (256 step) MDI, Jog Router Dust Collector Air 50/60Hz, 1.5KVA AC 220V/380V, 3Phase 50/60Hz, 3.0KVA 6 bar(90 psi) 200L/min IMPEC Routing control software TFT Touch screen RS232C PC Communications Software Features Bit life cycle check Bit Auto step down System User Password Protection Safety sensor Type High speed spindle motor Rotation Adjustable 50,000 rpm Cooling Air cooling Tool change Manual/ATC (Option) Auto digital control type Power 1.5Kw~ Filter Polyester filter 230mAq~ Noise level 68 ± 3dB Ionizer Dust collection auto shaking Fool proof checking Teching vision unit W axis motion Multi Spindle head unit User design jig type Compact robot and Stand-alone(Off-line) Type High Quality and Minimizing the stress on PC Board Routing Muiti Spindle head and two work base table 2-way sliding exchanger provides a simultaneous and individual operation Touch screen direct teaching & MPG Bit Auto step down for each model Fast & Accurate Movement and routing by Ac servo motor Powerful dust collecting capability Life cycle checking for Bit Very Safe Operation by sefety control

6 PRS-4000D 1 head / 2 table Servo Motor Stand-Alone Router MES, Available for Online Remote 1,250mm 1,130mm 1,750mm Approx 900Kg Drive method Multi AC servo motor X, Y1, Y2 and Z axis Servo Repeatability ±0.01mm Moving speed 1,000mm for each axis Router speed Up to 100mm/sec Work table Two work Work area 350mm x 300mm PCB thickness 0.4~2.4mm Color CCD camera vision direct teaching or MPG handle function Program data HDD memory MDI, JOG User design jig type Router 220V, 1Phase 50/60Hz, 1.5KVA 380V, 3Phase 6 bar(90psi) 200L/min IMPEC Routing control software Industry PC control for window XP TFT LCD 15 touch monitor Software Features Spindle, Bit & Dust life cycle check Bit auto step down User password protection Sefety sensor Type High speed spindle motor Rotation Adjustable 50,000 rpm Cooling Air cooling Tool change Manual/ATC (Option) Power 1.5Kw~ Bag filter Polyester filter 230mAq~ Noise level 68 ± 3dB Voltage AC220V/380V, 3Phase 50/60Hz, 3KVA Dimensions W620 x D820 x H1600mm Ionizer Dust collection auto shaking Fiducial check & tilting routing Multi spindle hade unit Compact robot and Stand-alone(Off-line) Type High Quality and Minimizing the stress on PC Board Routing Multi Spindle head and two work base table 2-way sliding exchanger provides a simultaneous and individual operation Color CCD Camera vision direct teaching & MPG The powerful programming is possible to simulate the head work with camera Fast & Accurate Movement and routing by Ac servo motor IMPEC routing software and Industry PC controller for Window xp Poweful dust collecting capability Life cycle checking for Bit, Spindle & Dust collector Bar code or PCB Fiducial checking & Tilting -Option

7 PRS-5500D 1 head / 2 table Servo Motor Stand-Alone Router MES, Available for Online Remote 1,400mm 1,330mm 1,800mm Approx 650Kg Drive method 4 axis AC servo motor X, Y1, Y2 and Z axis Servo Repeatability ±0.01mm Moving speed 1,000mm for each axis Router speed Up to 100mm/sec Table travel(mm) X:1000, Y1, Y2:450, Z:100 Work area 380mm x 430mm PCB thickness 0.4~2.4mm Program data HDD memory MDI, Jog & MPG Router Dust Collector 50/60Hz, 2.0KVA AC 380V, 3Phase 50/60Hz, 1.5KVA 6 bar (90 psi) 200L/min IMPEC control software Industry PC control for window XP Color CCD camera vision direct teching or Direct teaching using MPG handle function TFT LCD 15 Touch monitor Software Features Bit life cycle check Bit Auto step down User password protection Type High speed spindle motor Rotation Adjustable 50,000 rpm Cooling Air cooling Tool change Manual/ATC (Option) Auto digital control type Power 1.5Kw Bag filter Polyester teflon filter 2500mmAq Noise level 68 ± 3dB Dimensions W620 x D850 x H1600mm Approx 180Kg Ionizer unit DC or Frequency power Dust collection Auto Shaking PCB Fiducial check & culting route Auto Tilting System Compact and Stand-alone(Off-line) Type High Quality and Minimizing the stress on PC Board Routing Muliti Spindle head and two work base table 2-way sliding exchanger provides a simultaneous and indivdual operation Color CCD Camera vision direct teaching & MPG The powerful programming is possible to simulate the head work with camera Fast & Accurate Movement and routing by AC servo motor IMPEC routing software and Industry PC controller for Window xp Powerful dust collecting capability Life cycle checking sysem for Bit, Spindle & Dust collector Barcord or PCB Fiducial checking & Tilting -Option

8 PRS-6000S Robot Specification Table travel X : 600 mm, Y : 400 mm, Z : 100 mm Transfer travel LX : 500 mm, LZ : 100 mm, UX: 800 mm ~. UZ: 100m Working area Max 300 mm x 300 mm (User Spec) Moving speed X, Y, LX. UX axis : Max 1000 mm/sec Z, LZ, UZ, axis: Max 500 mm/sec Cutting speed 1 ~ 100 mm/sec Repeatability accuracy ±0.01mm for each axis Cutting accuracy ±0.1mm Program language MDI, JOG (Routing exclusive software) Drive method AC servo motor driving method PTP, LNE, ARC, CIRCLE, SPLINE 8 axis Simultaneous control (X, Y, Z, LX, LZ, UX, W axis) ler Industry PC control for Window xp panel 15 LCD Touch monitor Jig type Dedicated fixture jig Transfer type Air clamping or vacuum pad by servo motor dirving Teaching vision CCD camera vision direct teaching & MPG Ionizer unit DC Power or Frequency power Bit and dust life cycle check Display Pass through height 920 mm ±10 mm Ambient temperature 0 C ~ 40 C Pneumatic requirement 5~7 Kg/cm2 Electrical requirement AC 220V 50/60Hz 1 phase Dimensions : 1500~, Length : 1000~, : 1700~(mm) Approx Kg High-speed spindle motor : 350W power Rotation speed : Max rpm ( adjustable) Chuck diameter : Ø 3.175mm Dust motor type Ring blower motor or Turbo blower motor Motor power 1.5Kw~ Bag filter Polyester Teflon Auto shaking control Automatic shaking control-option Dust hopper Basket type Electrical requirement AC 220V or AC 380V 50/60Hz Dimensions : 650 ~, Length: 650 ~, : 1700 ~(mm) 120 Kg ~ 1 head / 1 table Servo Motor In-Line Router MES, Available for Online Remote Specially dedicated design for continuous production of In-line type Extremely fast cutting speed by high-speed spindle unit Industrial PC controller & easy touch monitor control Fast, accurate movement and routing by AC servo motor Highly effective dust-removal by bottom side dust collector Easy cutting point teaching by vision & MPG handle Broken bit detection & bit change cycle check Ionizer System & Fool proof checking -Option

9 PRS-7000D Robot Specification Table Travel X axis: 350 mm, Y1 axis: 350 mm, Y2 axis: 350 mm, Z axis: 100 mm Payload Work (X, Y1, Y2): 20Kg, Tool (Z): 10Kg Maximum speed X,Y,Z Axis : 1 ~ 1000 mm/sec Repeatability accuracy ±0.01mm for each axis Resolution X,Y1, Y2, Z axis 2500 pulse/rev Program language MDI, Jog, Manual Drive method AC servo motor driving method PTP, CP, SPLINE 4 axis (Simultaneous control of X,Y1, Y2 and Z axis) 4 axis (Simultaneous control of T,V, C, S axis) External interface RS232C 1ch (Teaching pendant) RS232C 1ch (PC communication) External input/output Input : 16 points for Output : 24 points Program Data memory 32 Program (2500 Point, Shift Point 100) Ambient temperature 0 ~ 40 Pneumatic Requirement 5~7 Kg/cm 2 Electrical Requirement AC 220V 50/60Hz ±10% 1KVA Dimensions : 2100 mm, Length : 1250 mm, : 1800mm 55 Kg Spindle Tool Cutting Speed Material of PCB Maximum size of PCB High Frequency motor : 150 W Power Rotation speed : Min 1000 ~ Max rpm ( adjustable) Chuck diameter : Ø 3.175mm or Ø 3.0mm 1 ~ 100mm/sec Glass epoxy, Paper phenol, etc Max 350mm 350mm 4.0mm 1 head / 2 table Servo Motor In-Line Router MES, Available for Online Remote In-line type for mass prouction & Most universal applications Double sliding beds lead reduction of working time Extremely fast cutting peed by high frequency spindle(60,000 RPM) Fast & efficient PCB picking, placing and discharging by pneumatic carrier Fast & precision movement and routing by AC servo motor High cutting accuracy (=0.1mm) Highly effective dust-removal by ionizer besides dust collector Simple & easy point teaching by vision Ring Blower Motor Dust Collector Capacity Constant Bag Filter Filter Area Motor : 1.9Kw Power 4.1 /min 2500mmAg Polyester Teflon, 8 Pockets 1.6

10 PCB SAW ROUTING SYSTEM PSR head / 1 table Servo Motor One Direction Saw Router 550mm 600mm 1,550mm Approx 150Kg Drive method 1 axis AC Motor (Speed control motor) Cutting repeatability ±0.1mm Cutting speed Max 200mm/sec PCB size(max) X:330mm, Y:180mm Component height Top: 15mm Bottom: 30mm Table travel Y: 200mm Work area Max 180mm PCB thickness 0.8~2.5mm & Programming PLC controller Main control panel 1 Program data memory PLC Programming Saw blade & Motor Saw diameter Ø 85mm Arbor diameter Ø 20mm Saw thickness 0.6T Tool change Manual Motor power 400W Rotation(Max) 8500 rpm Voltage 50/60Hz, 3.0KVA 6 bar(90psi) 100L/min Features Saw life counter check Sefety sensor Sefety door sensor Safety door cover Saw speed adjustable control Auto PCB fixfure sensor Auto digital control type Power 1.9Kw Bag filter Polyester teflon 230mmAq Noise level 68±3dB Approx 180Kg Ionizer unit Dust collection auto shaking Two dust collection Compact and Stand-alone(off-line) Type High Quality and Minimizing the stress on PC Board Routing High saw speed spindle and Universal work base table Fast & Accurate sawing by AC servo motor Suitable Equipment for V-cut PCB Powerful dust collecting capability for bottom and up side Saw Life cycle checking

11 PCB SAW ROUTING SYSTEM PSR-8000S 1 head / 1 table Servo Motor Two Direction Saw Router MES, Available for Online Remote Saw Router Specification Table travel X axis: 400 mm, Y axis: 400 mm, Z axis: 100 mm, R axis Working size of PCB Max 350 mm(w) x 300 mm(d) Maximum speed X, Y, Z axis: 1,000 mm/sec, R, S axis: 50 mm/sec Repeatability accuracy ±0.01 mm for each axis Cutting accuracy ±0.1 mm ler Industry PC controller for Window XP Main panel 15 LCD touch monitor Program language MDI, Jog (Saw cutting exclusive software) Drive method AC servo motor driving method PTP, LINE 5 axis (Simultaneous control of X, Y, Z, R and S axis) Programmable data memory Hard disk memory Teaching vision unit CCD camera vision direct teaching & MPG Fool probe unit Fiducial mark inspection Saw life cycle Monitor display Jig type Specified clamping type for customer Ionizer unit(option) DC Power or Frequency Ambient temperature 0 ~ 40 Pneumatic requirement 5 ~ 7 Kg/cm 2 Electrical requirement AC 220V 1 Ph (Saw) and 380V 3 Ph (Dust), 50/60 Hz Dimensions : 1200 mm, Length: 1400 mm, : 1800mm About 1,000 Kg Saw Tooling Specification Saw Motor AC servo motor driving: 400W power Rotation speed : Max 10,000 rpm ( adjustable) Blade diameter: 85 mm (External) x 20 mm (Internal) Max cutting speed 200 mm/sec Saw rotation angle R axis: (adjustable) Router cutting (option) High-speed brushless DC motor spindle Mass production of stand-alone type & handle a wide variety of PCBs-from V-score to pre-routed panels Products are safely held with saw tooling, which includes bottom and up side vacuum unit The blade also has a rotational capability of for performing adjustable angular cuts Easy cutting point teaching by vision & MPG handle and include an internet service function Extremely fast cutting speed and saw life cycle checking & Fiducial proof checking functions Dust Collecting Specification Dust motor type Turbo blower motor & Ring blower motor Motor power 1.5 Kw power & 1.9 Kw power Bag filter Polyester Teflon