LD display Operating Software. Installation manual

Transcription

1 LD display Operating Software Installation manual R /02 02/05/2006

2 Barco nv Media Noordlaan 5, B-8520 Kuurne Phone: Fax: Visit us at the web: Printed in Belgium

3 Changes Barco provides this manual as is without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice. This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication. Copyright All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Guarantee and Compensation Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints. The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either. The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by the customer. Trademarks Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures.

4

5 Table of contents TABLE OF CONTENTS 1. Overview Before starting PC requirements Installation Overview Installation of the software Installation of LD display software Installation of XLite Toolset Uninstalling LD display software... 8 R LD DISPLAY OPERATING SOFTWARE 02/05/2006 1

6 Table of contents 2 R LD DISPLAY OPERATING SOFTWARE 02/05/2006

7 1. Overview 1. OVERVIEW Overview Before starting PC requirements Installation Overview 1.1 Before starting Overview This guide is intended for system administrators. It assumes you are familiar with the Windows operating system at your site and with standard system administration tasks. The CD-ROM in your package contains all the product data for the LD display software, including a Windows-based installation program. You can install the software from the CD-ROM. 1.2 PC requirements PC must contain one free serial port. DPI settings must be set to normal. Minimum hardware requirements Pentium II 400 MHz or higher Memory : 256 MB Ram One free serial port Operating system Windows 2000 Windows XP DPI setting To avoid the missing of buttons and/of the system uses different fonts, set the DPI setting to the normal size (96 dpi). To set the dpi setting to the normal size : 1. Open the Windows display settings via Start Settings Display or via right click on the desktop and selecting Properties. 2. Select Settings. 3. Click on Advanced. 4. Click the General tab. 5. In Display, select Small font (96 dpi). 6. Close the display settings window. R LD DISPLAY OPERATING SOFTWARE 02/05/2006 3

8 1. Overview 1.3 Installation Overview Installation steps 1. Installation info gathering 2. Installation of LD display software 3. Installation of XLite Toolset 4 R LD DISPLAY OPERATING SOFTWARE 02/05/2006

9 2. Installation of the software 2. INSTALLATION OF THE SOFTWARE 2.1 Installation of LD display software To install 1. Insert the CD-ROM in the CD-ROM drive. 2. Is the AutoPlay active on your PC. If yes, continue with step 6. If no, from within the Windows environment go to the Start Menu. Choose Run... from the menu and proceed with the next steps. 3. Open windows explorer. 4. Select the CD-ROM Drive. 5. Double click setup.exe file. The installation wizard will be displayed. 6. Click Next on the installation wizard startup page. (image 2-1) The license window opens (License agreement). (image 2-2) Read this text carefully. 7. Do you agree with the license text? If yes, Click Yes to accept the agreement and to continue to the next step. The customer information window opens. (image 2-3) 8. Fill out the necessary information and click Next. The destination window opens. A proposed path is filled out. (image 2-4) 9. If you agree with the proposed path, click Next. Otherwise click Browse and select the desired path. The program folder selection window opens. (image 2-5) 10.If you accept the proposed folder, click Next. Otherwise select a folder or enter a new name. The LD display software will be installed. When the installation of the LD display software is finished, the wizard starts with the installation of XLite Toolset. R LD DISPLAY OPERATING SOFTWARE 02/05/2006 5

10 2. Installation of the software Image 2-1 Installation wizard start up Image 2-2 License agreement Image 2-3 Customer information Image 2-4 Destination window Image 2-5 Program folder 2.2 Installation of XLite Toolset To install 1. To start up the installation click on Next. (image2-6) 6 R LD DISPLAY OPERATING SOFTWARE 02/05/2006

11 2. Installation of the software 2. Read the license agreement and if agree, click on Next. 3. Accept the destination path or browse to a new path and click Next. 4. Set up choice. For new installation select Typical. With Typical, everything necessary to run the program will be installed (Tomcat webserver, Java environment variables and plug ins for the applets). With Custom you have the choice to install only the Xlite part or only the Java part. 5. Select Next to install. The XLite Toolset installation wizard returns to the LD display software wizard. 6. Click Finish to complete the installation. Image 2-6 XLite Toolset install shield wizard Check Some settings of the PC must be checked before launching the software: 1. Check if the Java Virtual machine (VM) is enabled on the PC. 2. Open your Internet Explorer. Select Tools Internet Options Temporary Internet Files Settings. 3. Check Every visit to the page and press OK. (image 2-7) Image 2-7 Internet options Settings R LD DISPLAY OPERATING SOFTWARE 02/05/2006 7

12 2. Installation of the software 2.3 Uninstalling LD display software How to uninstall 1. Open the Control Panel of your windows (Start Settings Control Panel). 2. Select Solaris LD from the list and click on the Change/Remove button. The uninstall procedure for LD display software will start. 3. The uninstall wizard asks for confirmation. 4. Click OK to remove completely. 5. Do you want to remove the data files too? Data files are the user files, preset files, configuration, etc. If yes, click on Yes. Every thing will be deleted. If no, click on No. LD display software will be able to work on the same configuration when reinstalled later. 8 R LD DISPLAY OPERATING SOFTWARE 02/05/2006

13 Revision Sheet To: Barco nv Media/Documentation Noordlaan 5, B-8520 Kuurne Phone: , Fax: Web: From: Date: Please correct the following points in this documentation (R /02): page wrong correct R LD DISPLAY OPERATING SOFTWARE 02/05/2006