Tool Set for RIGID machines

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Tool Set for RIGID machines"

Transcription

1 Tool Set for RIGID machines Tool Set Code H B Valid for : Generation kg / lb and, Date: 22 jun kg / 50 lb with ball bearing 63- series at back side. Rev-Date: 26 aug 2009 Code tool set per model OPERATION 1 Removing pulley TOOL PART 6-7 kg 18 lb 10 kg 25 lb 13 kg 30 lb kg lb Remover kg 60 lb 35 kg 80 lb Bolt Lever rod Puller standard puller Bolt Bearing house removing Front drum fixation N/A N/A N/A Tub support N/A Guidance rods N/A Drum guide N/A Bearings removal General push and pull tool N/A 3 Removal of bearing 1 Removal of bearing 2 cup bearing Squeeze out part Cup bearing Squeeze out part Distance tube Remove counter ring Lever N/A Remove seals sleeve Remove tool N/A N/A General push and pull tool Bearings assembly Cup bearing Cup bearing Distance tube Assembly of axial seal Push-in tool N/A Centering of axial seal Center thorn N/A Assembly of radial seals in seal holder Assembly of radial seal holder in bearing house Assembly of radial seal ring General push and pull tool N/A N/A Cup N/A N/A Center part N/A N/A General push and pull tool N/A N/A thorn N/A N/A thorn N/A N/A General pull tool N/A N/A cup N/A N/A 10 Bearing house assembly General pull tool Support part Pulley assembly General pull tool : Is previously mention in the table. 6/7/ B Tool Set Rigid Machines 1 /13

2 Pulley remover Used for kg / lb Pulley remover Used for kg / lb Center bolt for Main Shaft: Used for operation pulley and bearing house removing for kg / lb for kg / lb for 27 kg / 60 lb for 35 kg / 80 lb 6/7/ B Tool Set Rigid Machines 2 /13

3 Lever rods - Used in combination with pulley remover and Used in combination with Bearing removing and assembling tool Bearing house remover. Consist of : base bolt lever rod Used for 35 kg / 80 lb Drum holder at front side. Used for kg / lb Support tub at rear side : wooden block for 13 kg / 30 lb : St st support for kg / lb : wooden block for 27 kg / 60 lb 6/7/ B Tool Set Rigid Machines 3 /13

4 Gliding rods for bearing house. Used for kg / lb Help tool to remove / bring-in Drum in bearing house. Consist of : tube bushing lever rod Used for 35 kg / 80 lb Bearing removing and assembling tool. Consist of : Threaded rod Bearing loaded ring Special nut Used for (ass) kg / (ass) lb cap Bearing removing assembling distance tube. Used for (ass) kg / (ass) lb. different cups and Squeeze out parts. 6/7/ B Tool Set Rigid Machines 4 /13

5 Bearing back removing cup and Squeeze out part Back bearing cup for 6-7 kg / 18 lb Back bearing Squeeze out part for 6-7 kg / 18 lb. Works in combination with tool Bearing front removing cup and Squeeze out part Front bearing cup for 6-7 kg / 18 lb Front bearing Squeeze out part for 6-7 kg / 18 lb and, Back bearing for 10 kg / 25 lb Works in combination with tool Bearing back removing cup Back bearing cup for 10 kg / 25 lb Squeeze out part Bearing front removing cup and squeeze out part Front bearing cup for 10 kg / 25 lb Front bearing Squeeze out part for 10 kg / 25 lb and, Back bearing of 13 kg / 30 lb. Works in combination with tool /7/ B Tool Set Rigid Machines 5 /13

6 Bearing back removing cup Back bearing cup of 13 kg / 30 lb. Squeeze out part Bearing Front removing cup Front bearing cup of 13 kg / 30 lb Squeeze out part Bearing Front and back removing cup Front bearing cup of kg / lb and, Back bearing of 27 kg / 60 lb Squeeze out part Bearing front removing cup and Squeeze out part Front bearing cup for kg / lb Front bearing Squeeze out part for kg / lb. Works in combination with tool /7/ B Tool Set Rigid Machines 6 /13

7 Bearing front removing cup and Squeeze out part Front bearing cup for 27 kg / 60 lb Front bearing Squeeze out part for 27 kg / 60 lb. Works in combination with tool Remove stamp for Back bearing. Used for 35 kg / 80 lb Remove stamp for Front bearing. Used for 35 kg / 80 lb Remove lever for counter ring. Used for 35 kg / 80 lb 6/7/ B Tool Set Rigid Machines 7 /13

8 Remover seal ring. Used for 27 kg / 60 lb Bearing assembling cups Back bearing cup for 6-7 kg / 18 lb Front bearing cup for 6-7 kg / 18 lb and, Back bearing of 10 kg / 25 lb distance tube Bearing assembling cup Front bearing cup for 10 kg / 25 lb Works in combination with tool , assembly cup and distance tube Bearing assembling cups + radial seal Back bearing cup for 13 kg / 30 lb Front bearing cup for 13 kg / 30 lb and, Back bearing of kg / lb and, Radial seal holder 27 kg / 60 lb distance tube /7/ B Tool Set Rigid Machines 8 /13

9 Bearing assembling cup Front bearing cup for kg / lb Works in combination with tool , assembly ring and distance tube Bearing assembling cup Front bearing cup for 27 kg / 60 lb Works in combination with tool , assembly cup and distance tube Bearing assembling cups Back bearing cup for 35 kg / 80 lb Front bearing cup for 35 kg / 80 lb distance tube Tool to Push-in axial seal to holder Used for 6-7 kg / 18 lb 6/7/ B Tool Set Rigid Machines 9 /13

10 Tool to Push-in axial seal to holder Used for kg / lb Tool to Push-in axial seal to holder Used for kg / lb Tool to Push-in axial seal to holder Used for 35 kg / 80 lb Center thorns axial seal Center thorn for axial seal in stainless steel plate on bearing house assembly 6-7kg / 18lb Center thorn for axial seal in stainless steel plate on bearing house assembly 10-16kg / 25-35lb 6/7/ B Tool Set Rigid Machines 10 /13

11 Mounting radial seal into seal holder Counter piece Radial seal cup distance tube Used for 27 kg / 60 lb Mounting tool radial seal ring on main shaft. Works in combination with tool and drive rod Used for 27 kg / 60 lb Push unit Consist of : Threaded rod with M12 end, used for kg / lb : Threaded rod with M14 end, used for 35 kg / 80 lb : Threaded rod with M16 end, used for 27 kg / 60 lb : Nut : Ring bearing loaded : Tube wrench Bearing support part to pull shaft into bearing house. Works in combination with tool and threaded rod with M12 end. Used for 6-7 kg / 18 lb 6/7/ B Tool Set Rigid Machines 11 /13

12 Bearing support part to pull shaft into bearing house. Works in combination with tool and threaded rod with M12 end. Used for 10 kg / 25 lb Bearing support part to pull shaft into bearing house. Works in combination with tool and threaded rod with M12 end. Used for 13 kg / 30 lb Bearing support part to pull shaft into bearing house. Works in combination with tool and threaded rod with M12 end. Used for kg / lb. Works in combination with tool and threaded rod with M16 end. Used for 27 kg / 60 lb 6/7/ B Tool Set Rigid Machines 12 /13

13 Bearing support part to pull shaft into bearing house. Works in combination with tool and threaded rod with M14 end. Used for 35 kg / 80 lb Bearing support part (removing bearing 22214E with tool Used for 35 kg / 80 lb Bearing support part (removing bearing 22217E with tool Used for 35 kg / 80 lb 6/7/ B Tool Set Rigid Machines 13 /13

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

Instruction Manual MJ522 Mobile Hydraulic Scissor Lift Table 1100 lbs. (500 kg)

Instruction Manual MJ522 Mobile Hydraulic Scissor Lift Table 1100 lbs. (500 kg) Instruction Manual MJ522 Mobile Hydraulic Scissor Lift Table 1100 lbs. (500 kg) Warning! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit

More information

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT 14 STEERING HANDLEBAR/FRONT WHEEL/FRONT 14 SERVICE INFORMATION... 14-2 TROUBLESHOOTING... 14-2 STEERING HANDLEBAR... 14-3 FRONT WHEEL... 14-5 HYDRAULIC BRAKE... 14-8 FRONT SHOCK ABSORBER... 14-16 FRONT

More information

DRUM SANDING MACHINE ELF AUS CAN GB IRL NZ USA. Spare parts. for the drum sanding machine ELF

DRUM SANDING MACHINE ELF AUS CAN GB IRL NZ USA. Spare parts. for the drum sanding machine ELF DRUM SANDING MACHINE ELF AUS CAN GB IRL NZ USA Spare parts for the drum sanding machine ELF Copyright Eugen Lägler GmbH, 2011 All rights reserved. Subject to changes. Spare parts ELF 2 Item Part no. Description

More information

PARTNERIllustrated Parts List CD

PARTNERIllustrated Parts List CD PARTNERIllustrated Parts List 2000-05 CD K850 Mark II 1987-1998 K1200 Mark II 1987-1998 108 30 00-55 A 503 22 00-01 503 20 00-45 503 20 00-08 505 26 21-72 505 26 78-79 506 05 71-03 506 07 06-01 506 07

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

WORKSHEET 3-1 Rear-Drive Transmission Case Removal and Component Identification

WORKSHEET 3-1 Rear-Drive Transmission Case Removal and Component Identification WORKSHEET 3-1 Rear-Drive Transmission Case Removal and Component Identification Vehicle: Year/Prod. Date: Engine Transmission: Worksheet Objectives With this worksheet, you will follow the disassembly

More information

13. REAR WHEEL/REAR BRAKE/

13. REAR WHEEL/REAR BRAKE/ 13 1.2kg-m 1.0kg-m 13 11.0kg-m 3.5kg-m 13-0 AGILITY 50 SERVICE INFORMATION... 13-1 TROUBLESHOOTING... 13-1 REAR WHEEL... 13-2 REAR BRAKE...13-3 REAR SHOCK ABSORBER...13-4 SERVICE INFORMATION GENERAL INSTRUCTIONS

More information

TRANSMISSION / TRANSAXLE (FIVE SPEED MANUAL TRANSAXLE: D16, D20)

TRANSMISSION / TRANSAXLE (FIVE SPEED MANUAL TRANSAXLE: D16, D20) TRANSMISSION / TRANSAXLE 5B1 1 SECTION 5B1 TRANSMISSION / TRANSAXLE (FIVE SPEED MANUAL TRANSAXLE: D16, D20) 561. MANUAL TRANSAXLE................................................. 5B1 3 563. TRANSAXLE GEAR....................................................

More information

TRANS-05, Torque Tube Removal, Rebuilding, and Installation

TRANS-05, Torque Tube Removal, Rebuilding, and Installation TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket

More information

Illustrated Parts List to

Illustrated Parts List to Illustrated Parts List Model Series 245400 to 245499 TYPE NUMBERS 0035 through 0090, 0121 through 0128, 0235 through 0299, 0519 through 0555. FORM MS 1093 3C 7/2001 REPLACES FORM MS 1093 12/99 FILE IN

More information

Compressor. Sanden Compressor Tools (used on TNT, CB and STB) 204-558 Seal retainer. 204-559 Front plate puller. 204-560 Shaft protector

Compressor. Sanden Compressor Tools (used on TNT, CB and STB) 204-558 Seal retainer. 204-559 Front plate puller. 204-560 Shaft protector Sanden Compressor Tools (used on TNT, CB and STB) 204-558 Seal retainer 204-559 Front plate puller 204-560 Shaft protector 204-552 Rotor puller set 34 Sanden Compressor Tools (used on TNT, CB and STB)

More information

Spare Parts for. Schwing Concrete Pumps. Section 2

Spare Parts for. Schwing Concrete Pumps. Section 2 Spare Parts for Schwing Concrete Pumps Section 2 Rock valve housing DN 200/210/180 (101 644 87) Pos Part No. Description Remark 1 02 1015 07 Housing DN200/210/180 2 02 1007 69 Base plate DN250/230/200/180

More information

Operating Instructions Parts List Manual Scissor Lift Pallet Truck

Operating Instructions Parts List Manual Scissor Lift Pallet Truck Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors

More information

CAUTION. Nev-R-Lube Drums/Bearings. Hubs/Drums/Bearings

CAUTION. Nev-R-Lube Drums/Bearings. Hubs/Drums/Bearings Nev-R-Lube Drums/Bearings Dexter s Nev-R-Lube bearings are comprised of opposed tapered roller bearing cones sealed inside of a precision ground, one piece double cup arrangement. These bearings are designed

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

Tube Type Oil Skimmer Comparison

Tube Type Oil Skimmer Comparison Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube

More information

MANUAL TRANSMISSION SECTIONMT CONTENTS

MANUAL TRANSMISSION SECTIONMT CONTENTS MANUAL TRANSMISSION SECTIONMT CONTENTS PREPARATION...2 Special Service Tools...2 Commercial Service Tools...4 TRANSMISSION FS5R30A...5 Replacing the Rear Oil Seal...5 FS5R30A ON-VEHICLE SERVICE...6 Check

More information

GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422

GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422 GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422 Effective March 15, 2015 Exclusive Distributer for GMP Lasher Parts NOTES 2 Strand Lock Release Snubbing Lashing Wire Tension Pulley Front

More information

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT 13 13 STEERING HANDLEBAR/FRONT WHEEL/FRONT SERVICE INFORMATION------------------------------------------------ 13-1 TROUBLESHOOTING----------------------------------------------------- 13-2 STEERING HANDLEBAR

More information

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner

More information

MANUAL TRANS OVERHAUL - TYPE 020 Article Text 1996 Volkswagen Golf This file passed thru Volkswagen Technical Site -

MANUAL TRANS OVERHAUL - TYPE 020 Article Text 1996 Volkswagen Golf This file passed thru Volkswagen Technical Site - MANUAL TRANS OVERHAUL - TYPE 020 Article Text 1996 Volkswagen Golf This file passed thru Volkswagen Technical Site - http://volkswagen.msk.ru ARTICLE BEGINNING MANUAL TRANSMISSIONS Volkswagen Type 020

More information

for BPW axles and axle suspensions

for BPW axles and axle suspensions BPW Special tools and calibration equipment BPW BERGISCHE ACHSEN BPW Special tools and calibration equipment for BPW axles and axle suspensions BPW SPECIAL TOOLS AND CALIBRATION EQUIPMEN BPW Special tools

More information

POULAN PRO r PARTS LIST

POULAN PRO r PARTS LIST -7/1/9 1 WARNING All repairs, adjustments and maintenance not described in the Operator s Manual must be performed by qualified service personnel.. 50. 1 4 4 5 4 4 4. 4 5 4 0. 4 1. 1 1 1 2 2 2 2 2 Decal

More information

STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK

STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK 14 STEERING HANDLEBAR/FRONT WHEEL/FRONT SCHEMATIC DRAWING-------------------------------------------------------------------------14-1 SERVICE INFORMATION-----------------------------------------------------------------------14-2

More information

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator

Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890

More information

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496

More information

Hubs, Axles, Wheels & Accessories

Hubs, Axles, Wheels & Accessories Hubs, Axles, Wheels & Accessories 13-01 XL & FX Front Hub Assembly 1974 to 1977 XL, FX & FXR Front Hub Assembly 1977 to 1999 Softail Front Hub Assembly 58007 SOLD EACH Replaces 43672-84 Fits FXST(C) models

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

How To... SERVICE AND REPAIR GUIDE

How To... SERVICE AND REPAIR GUIDE SECTION III How To... SERVICE AND REPAIR GUIDE 1 How To... Replace the Display Console and Accessory Tray Tools required: Phillips screwdriver 1. Remove the (4) MOUNTING SCREWS from under the CONSOLE,

More information

FM0107PC SBC Mid-mount Alternator Bracket

FM0107PC SBC Mid-mount Alternator Bracket FM0107PC SBC Mid-mount Alternator Bracket 1/4 Allen Wrench 1/2 Open End Wrench 9/16 Open End Wrench We recommend applying Anti-Seize to all threads when assembling bracket. Recommended Belt: Goodyear 6

More information

REAR AXLE 27-1 CONTENTS 27109000161 ON-VEHICLE SERVICE... 3 GENERAL INFORMATION... 2 SERVICE SPECIFICATIONS... 2 SPECIAL TOOLS... 2 REAR AXLE HUB...

REAR AXLE 27-1 CONTENTS 27109000161 ON-VEHICLE SERVICE... 3 GENERAL INFORMATION... 2 SERVICE SPECIFICATIONS... 2 SPECIAL TOOLS... 2 REAR AXLE HUB... 27-1 REAR AXLE CONTENTS 27109000161 GENERAL INFORMATION... 2 SERVICE SPECIFICATIONS... 2 SPECIAL TOOLS... 2 ON-VEHICLE SERVICE... 3 Wheel Bearing Axial Play Check... 3 Wheel Bearing Rotary-Sliding Resistance

More information

BRAKE SYSTEM Volvo 850 DESCRIPTION BLEEDING BRAKE SYSTEM ADJUSTMENTS BRAKE PEDAL HEIGHT PARKING/EMERGENCY BRAKE

BRAKE SYSTEM Volvo 850 DESCRIPTION BLEEDING BRAKE SYSTEM ADJUSTMENTS BRAKE PEDAL HEIGHT PARKING/EMERGENCY BRAKE BRAKE SYSTEM 1995 Volvo 850 1995-96 BRAKES Volvo Brakes - Disc 850 DESCRIPTION All models use front and rear disc brakes with 3 makes of calipers: ATE, Bendix (DBA) and Girling. Service brakes are hydraulically-operated

More information

DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH)

DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH) Page 1 of 20 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH) DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH)

More information

Illustrated Parts List

Illustrated Parts List FORM MS 5761 08/22/2006 REPLACES FORM MS 5761 06/06/2006 FILE IN SECT. 2 OF SERVICE MANUAL 356400 Illustrated Parts List Model Series 356400 TYPE NUMBERS 0065 through 1415. TABLE OF CONTENTS Air Cleaner.........................

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002

More information

SAW UT10580, UT10582 / 14 / 16 & UT10918

SAW UT10580, UT10582 / 14 / 16 & UT10918 HOMELITE UT10540, UT1054 / 14 in. 35cc CHAIN SAW UT1050, UT105 / 1 in. 3cc CHAIN SAW UT1050, UT105 & UT1091 / 1 in. 4cc CHAIN SAW (ALL VERSIONS) REPAIR SHEET Small Engine Parts Figure A 1 1 1 (See Figure

More information

Pequea Wagon Gears. Model WG606, 806, 1086, 1286, Operator s Manual THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE ANYONE OPERATES THIS MACHINE!

Pequea Wagon Gears. Model WG606, 806, 1086, 1286, Operator s Manual THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE ANYONE OPERATES THIS MACHINE! Pequea Wagon Gears Model WG606, 806, 1086, 1286, 1288 Operator s Manual THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE ANYONE OPERATES THIS MACHINE! YOU MUST FILL OUT YOUR WARRANTY REGISTRATION TO ACTIVATE

More information

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 1 of 20 42 Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 2 of 20 42 Inch Deck 1 16606 1 S Bracket: Retainer Hook 2 618-0565 1 S Spindle Assembly: Pulley

More information

Automatic Washers Refer to Page 3 for Model Numbers

Automatic Washers Refer to Page 3 for Model Numbers Automatic Washers Refer to Page 3 for Model Numbers Parts W194P www.comlaundry.com Part No. 200638R1 April 2007 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location... 2 Model

More information

HYDRAULIC LIFT TABLE CART 2200-LB.

HYDRAULIC LIFT TABLE CART 2200-LB. HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

UNIVERSAL 1550 PRE-MIX DISPENSER

UNIVERSAL 1550 PRE-MIX DISPENSER MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95

More information

CLASS III TRUCK PARTS Baker

CLASS III TRUCK PARTS Baker CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie

More information

Contents. Description Page Description Page

Contents. Description Page Description Page Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder

More information

HEDGE CLIPPER MODEL HC-1500 TYPE 1E

HEDGE CLIPPER MODEL HC-1500 TYPE 1E HC-00 TYPE E HEDGE CLIPPER MODEL HC-00 TYPE E SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 0 0/ HC-00 TYPE E ENGINE, CRANKCASE, COVER 0 ENGINE, CRANKCASE, COVER HC-00 TYPE

More information

12. REAR WHEEL/BRAKE/SUSPENSION

12. REAR WHEEL/BRAKE/SUSPENSION 12 12 12-0 SERVICE INFORMATION... 12-1 REAR BRAKE... 12-5 TROUBLESHOOTING... 12-2 REAR SHOCK ABSORBER... 12-8 REAR WHEEL... 12-3 REAR FORK... 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing

More information

DRIVE AND DRIVEN PULLEY

DRIVE AND DRIVEN PULLEY 11 DRIVE AND DRIVEN PULLEY SCHEMATIC DRAWING ------------------------------------------------- 11-1 SERVICE INFORMATION------------------------------------------------ 11-2 TROUBLESHOOTING-----------------------------------------------------

More information

W58 MANUAL TRANSMISSION MT1 1

W58 MANUAL TRANSMISSION MT1 1 W58 MANUAL TRANSMISSION MT11 MT12 OPERATION W58 MANUAL TRANSMISSION OPERATION The illustrations below show the engagements of transmission gears. W58 MANUAL TRANSMISSION PREPARATION SST (SPECIAL SERVICE

More information

SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06

SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06 SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz

More information

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common

More information

10527SB-LS. Illustrated Parts Listing /

10527SB-LS. Illustrated Parts Listing / 0SB-LS Illustrated Parts Listing / 990000 AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. 0SB-LSb (990000), PRODUCT NO. 9 9 00-0 9 0 9 0 (EXPLODED) 9 0.0.00-B NOTE: All component dimensions

More information

STEERING SYSTEM - POWER RACK & PINION

STEERING SYSTEM - POWER RACK & PINION STEERING SYSTEM - POWER RACK & PINION 1993 Toyota Celica 1993 STEERING Toyota - Power Rack & Pinion Celica DESCRIPTION & OPERATION System consists of a rack and pinion assembly, hydraulic pump, and hoses.

More information

Unit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008)

Unit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008) Rear Wheel/Brake/Suspension 13. Rear Wheel/Brake/Suspension Service Information 13-1 Troubleshooting 13-2 Rear Wheel 13-3 Rear Cushion 13-4 Rear Swing Arm 13-7 Service Information General Safety If the

More information

Volkswagen To. Engine Crankshaft, Pistons. www.baumtools.com sales@baumtools.com. 800-848-6657 Toll Free 941-927-1414 Intl' 941-927-1612 Fax

Volkswagen To. Engine Crankshaft, Pistons. www.baumtools.com sales@baumtools.com. 800-848-6657 Toll Free 941-927-1414 Intl' 941-927-1612 Fax - FLYWHEEL LOCK Locks flywheel in place during removal and installation. Audi - 4, AAN VW - Fox, Dasher, Quantum - CLUTCH PILOT BEARING PULLER Replaced by W88. Audi - 4, 5 984< VW - Vanagon -5 MOUNTING

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003

More information

CAVITATION PLATE HARDWARE

CAVITATION PLATE HARDWARE CAVITATION PLATE HARDWARE DELUXE ADJUSTABLE CAVITATION PLATE HARDWARE The deluxe kit is furnished with Item #580 bronze chrome pillow transom blocks with 7/8 bronze bushings. The deluxe kit uses the stainless

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36

More information

Variable Stroke Straight-Line Action

Variable Stroke Straight-Line Action 4. FO Series FL Series G Series Type of Mounting: Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and (two-handed operation) Type of Mounting: Type of Actuation: Locking

More information

To order these parts, call us at A 191A

To order these parts, call us at A 191A 190 191 190A 191A Small Chrome Hub Caps Fit the front and rear of various models thru 1996. 190 Fits Springer front ends (includes spacers) $42.95 190A Fits 1984-1996 FXWG, FXDWG and FXST Wide Glide front

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2012 TOYOTA FJ CRUISER Please read before beginning Stainless steel hardware may

More information

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS

More information

Louet S17 Kit Wheel Assembly Instructions

Louet S17 Kit Wheel Assembly Instructions Louet S17 Kit Wheel Assembly Instructions Courtesy of Hello Yarn www.helloyarn.com I ve written up these assembly instructions as a replacement to the Louet instructions, which are a little basic, in my

More information

Copyright Schaeffler Automotive Aftermarket GmbH & Co. KG December 2014

Copyright Schaeffler Automotive Aftermarket GmbH & Co. KG December 2014 Special tools The content of this brochure is not legally binding and is solely intended for information purposes. Where legally permissible, all liability on the part of Schaeffler Automotive Aftermarket

More information

BRAKELINE BLEEDING SEQUENCE TABLE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

BRAKELINE BLEEDING SEQUENCE TABLE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Article Text ARTICLE BEGINNING 1993 BRAKES Volkswagen Disc & Drum EuroVan DESCRIPTION All models are equipped with front disc brakes. Rear brakes are either disc or drum. Parking brake acts on rear brakes

More information

Di-Acro Hand Operated #12 & #18 Turret Punch Press

Di-Acro Hand Operated #12 & #18 Turret Punch Press OPERATOR S MANUAL & INSTRUCTIONS Di-Acro Hand Operated #12 & #18 Turret Punch Press Di-Acro, Incorporated PO Box 900 Canton, Ohio 11 1 Progress Street N.E. Canton, Ohio 0 0--192 0--0220 (fax) Revised 0/02

More information

MANUAL TRANSMISSION SYSTEM

MANUAL TRANSMISSION SYSTEM RA61F MANUAL TRANSMISSION MANUAL TRANSMISSION SYSTEM 1 MANUAL TRANSMISSION SYSTEM PROBLEM SYMPTOMS TABLE Use the table below to help determine the cause of the problems. The numbers indicate the ranked

More information

DEINES MANUFACTURING CORPORATION

DEINES MANUFACTURING CORPORATION DEINES MANUFACTURING CORPORATION MODEL 50 SLI DECK SUPPLEMENT PARTS AND SERVICE MANUAL DEINES MANUFACTURING CORPORATION 306 WEST HIGHWAY 4 RANSOM, KS 67572 800-624-6774 martyj@gbta.net DECK MAINTENANCE

More information

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive

More information

Dismantling and Reassembly Guide

Dismantling and Reassembly Guide Super X3 Mill Dismantling and Reassembly Guide A picture story book to help you dismantle and reassemble your Sieg Super X3 Mill Arc Euro Trade Ltd. 10 Archdale Street, Syston, Leicester, LE7 1NA. Web:

More information

MFJ METER GROUND PLANE ANTENNA

MFJ METER GROUND PLANE ANTENNA INTRODUCTION MFJ-1756 6 METER GROUND PLANE ANTENNA The MFJ-1756 Ground Plane Antenna features a DC grounded element and a ground isolated radial system for improved performance. The ground isolated radial

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

How To... SERVICE AND REPAIR

How To... SERVICE AND REPAIR SECTION III How To... SERVICE AND REPAIR Page Pedals, Crank Arms, and Side Shrouds...3 Crank Shaft Hub Assembly...5 Crank Shaft and Bearings...7 Clutch Assembly...10 Intermediate Pulley Shaft and Bearings...11

More information

Hapkit Assembly Instructions 3D-printed, capstan drive version

Hapkit Assembly Instructions 3D-printed, capstan drive version Hapkit Assembly Instructions 3D-printed, capstan drive version 9.28.15 1. Obtain the Hapkit components. Consult the parts list provided, and contact CAs for the parts you don't already have on hand. Tools

More information

ZF S5-31. Manual Transmission Spare Parts Catalog

ZF S5-31. Manual Transmission Spare Parts Catalog ZF S5-31 Manual Transmission Spare Parts Catalog Warranty Information Warranty coverage for ZF passenger car transmission spare parts and kits covers the first 12 months after installation in the vehicle,

More information

HYDRAULIC ASSIST DURA BIKE RACK INSTRUCTIONS Model #26321

HYDRAULIC ASSIST DURA BIKE RACK INSTRUCTIONS Model #26321 HYDRAULIC ASSIST DURA BIKE RACK INSTRUCTIONS Model # Important Warning This bike rack is designed for use in a or. receiver and designed to hold a maximum of four bikes. Do not use this rack for anything

More information

ÈREPLACING MAIN BEARINGS AND SEALS ON 30015, 30020, 30022Cxx, Kxx, Sxx, AND Mxx MODELS

ÈREPLACING MAIN BEARINGS AND SEALS ON 30015, 30020, 30022Cxx, Kxx, Sxx, AND Mxx MODELS MSSM0708BE/9846AV ÈREPLACING MAIN BEARINGS AND SEALS ON 30015, 30020, 30022Cxx, Kxx, Sxx, AND Mxx MODELS ELECTROCUTION HAZARD High voltage is present inside electric boxes, motors, and many other components,

More information

Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.

Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Tools Spares Guide Tools Spares Guide The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Throughout the guide you will find:- Exploded

More information

URSUS / ZETOR CATALOGUE S.NO. SE REF # ITEM NAME OEM REF # MODEL PHOTO

URSUS / ZETOR CATALOGUE S.NO. SE REF # ITEM NAME OEM REF # MODEL PHOTO URSUS / ZETOR CATALOGUE S.NO. SE REF # ITEM NAME OEM REF # MODEL PHOTO 1 19540001 ALM. THROVER COVER W/THREAD 50104580 URSUS 2 19540002 ARMETURE 12V 46657099/85 4300 URSUS 3 19540003 BENDIX DRIVE 10 T,

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

SECTION 16 DIFFERENTIAL

SECTION 16 DIFFERENTIAL SECTION 16 DIFFERENTIAL CONTENTS 16-1. GENERAL DESCRIPTION... 16-2 16.2. REMOVAL... 16-3 16-3. DISASSEMBLY... 16-6 16-4. INSPECTION AND ADJUSTMENT OF COMPONENTS... 16-7 16.5. REASSEMBLY... 16-13 16-6.

More information

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55

1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951

More information

K&T Saw Shop or

K&T Saw Shop or 11-600012 SUPER 10-10E CHAIN SAW 08/69 to 10/70 IPL 69914 Page 1 of 17 Accessories www.ktoutdoor.com 11-600012 SUPER 10-10E CHAIN SAW 08/69 to 10/70 IPL 69914 Page 2 of 17 Accessories 83434 Manual - Owner's

More information

Part # 11300210 67-70 GM B Body Complete CoilOver System

Part # 11300210 67-70 GM B Body Complete CoilOver System 350 S. St. Charles St. Jasper, In. 47546 Part # 11300210 67-70 GM B Body Complete CoilOver System Front Components: 1 11283510 Front HQ Series CoilOvers 1 11282899 Front Lower StrongArms 1 11283699 Front

More information

This little motorcycle has been designed

This little motorcycle has been designed MITE CYCLE You'll need only an "A" ration to run this midget motorcycle. by R. G. Fisher The Mite Cycle, with its builder, is shown above. A small one-cylinder engine provides the motive power. This little

More information

Honda Reflex Water Pump Service

Honda Reflex Water Pump Service Honda Reflex Water Pump Service I have had a problem with dark brown oil probably combined with some coolant leaking from the weep hole under the Reflex. This article describes how the water pump can be

More information

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16" Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16 Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57 HEX-STUD made from heat treated alloy steel. In case of failure due to overload, the hexagon portion will remain in rod and can be easily removed Buna N rod wiper seal assures dry drip free piston rod

More information

Illustrated Parts List

Illustrated Parts List FORM MS 5267 07/22/2008 REPLACES FORM MS 5267 05/29/2008 FILE IN SECT. 2 OF SERVICE MANUAL 129600 Illustrated Parts List Model Series 129600 TYPE NUMBERS 0111 through 0114. TABLE OF CONTENTS Air Cleaner.........................

More information

The Ford Model A Water Pump

The Ford Model A Water Pump The Ford Model A Water Pump George Washington Chapter, Inc. 3903 Old Lee Highway Fairfax, VA 22030 1 Table of Contents Introduction/Specifications.. 3 1. Water Pump Inspection and Removal. 4 a. Removal..

More information

TA-Y (ESO-9306A)

TA-Y (ESO-9306A) TA-Y08-40043 (ESO-9306A) July 206 Contents How To Use The Illustrated Parts List... 3 CASE ASSEMBLY... 4 CLUTCH HOUSING ASSEMBLY... 6 CONTROL HOUSING ASSEMBLY... 8 COUNTERSHAFT ASSEMBLY... 0 INPUT SHAFT

More information

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle Article Text ARTICLE BEGINNING MANUAL TRANSMISSIONS Saab 5-Speed Transaxle APPLICATION TRANSMISSION APPLICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Vehicle Application Transmission

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime

More information

Pulley Assembly and Timing Belt

Pulley Assembly and Timing Belt Pulley Assembly and Timing Belt Tools Needed ½ or ¼ Cold Chisel & Pair of large pliers Allen Wrenches: (3/16) (5/16) (5/32) (3/32) Open Head Wrenches: (5/8) (1/2) (9/16) Ratchet Sockets: (5/8) (1/2) (9/16)

More information

KUBOTA WATER-COOLED DIESEL ENGINE

KUBOTA WATER-COOLED DIESEL ENGINE SPARE PARTS CATALOGUE KUBOTA WATER-COOLED DIESEL ENGINE MODEL: E75N E75NB3 EA300-E2NB1 TABLE OF CONTENTS Fig. No. Description E75N E75NB3 EA300 Page 0001 Crankcase 2 0003 Cylinder Head 3 0004 Gear Case

More information

SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS

SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS components, accessories, spare parts for construction machineries SPARE PARTS FOR CONSTRUCTION MACHINERY CONCRETE PUMPS, TRUCK MIXERS & BATCHING PLANTS INTRODUCTION We are pleased to introduce our product

More information

COMET PLUNGER PUMP SERVICE MANUAL INDEX

COMET PLUNGER PUMP SERVICE MANUAL INDEX COMET PLUNGER PUMP SERVICE MANUAL INDEX 1. SAFETY INSTRUCTIONS, OPERATING PROCEDURES AND LIMITS... 1 1.1 Installation and Start-up Information 2. TORQUE SETTING CHART... 1-2 2.1 AXD Series Pump 2.2 LW/ZW

More information

ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59

ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59 ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59 INDEX Exploded view page 1 Parts list pages 2-3 Torque specs page 4 Fluid requirements page 4 Assembly pages 4-6 Clutch cable install page 7 Ultima recommends

More information

BRAKE SYSTEM Volvo 960 DESCRIPTION BLEEDING BRAKE SYSTEM ADJUSTMENTS BRAKE PEDAL HEIGHT PARKING/EMERGENCY BRAKE STOPLIGHT SWITCH

BRAKE SYSTEM Volvo 960 DESCRIPTION BLEEDING BRAKE SYSTEM ADJUSTMENTS BRAKE PEDAL HEIGHT PARKING/EMERGENCY BRAKE STOPLIGHT SWITCH BRAKE SYSTEM 1994 Volvo 960 1994 BRAKES Volvo Brake System - Disc 960 DESCRIPTION All models use front and rear disc brakes with 3 makes of calipers: ATE, Bendix (DBA) and Girling. Service brakes are hydraulically-operated

More information