Optical LAN Solutions

Transcription

1 Optical LAN Solutions Passive Optical Network Applied to the Enterprise 2011 Tyco Electronics Corp., a TE Connectivity LTD Company. All Rights Reserved. ADC, ADC logo, Rapid Reel, RealFlex, TE Connectivity, TE Connectivity logo, TFP, TRUENET, and Tyco Electronics are trademarks. Other products, logos, and company names herein may be trademarks of their respective owners. Luca Rozzoni RCDD Business Development Manager TE Connectivity EMEA ANZ India

2 Key Terms PON Passive Optical Network (Carrier) Between Central Office (CO), or substation, and the premises in FTTx. POL - Passive Optical Local Area Network - (Enterprise) Between the data center / equipment room and the user*. *A user can be a human or device. (Virtually any IP device with an RJ-45 interface) GPON - Gigabit Passive Optical Network

3 A thought to begin with If you always do what you always did, you will always get what you always got.

4 Keeping pace with the many changes in IT Change has been to main driver for most enterprises in the last decade Bandwidth requirements have increased by order of magnitude Numbers and type of devices connected has also jumped dramatically Traffic patterns have shifted to more centralised and cloud based Ironically It s all happened in an economic environment that gives IT much less to spend. And yet costly work groups switch based architecture are built the same way

5 Main Factors for Change Rethinking of the physical infrastructure / abandoning old assumptions Re-evaluation of the way the LAN architecture is deployed Re-consideration of processes and vendors Alignment of IT to the business agenda Gradually an increasing number of enterprises are abandoning some of the assumption they used to make and start looking at alternatives

6 GPON Evolution The success of the OSP system has created an opportunity to bring the same system design into the enterprise LAN

7 Game changer & Disruptive Technology IT architectures are changing and therefore the network architecture has to adapt with it. Evolution of network technologies departmental and distributed services vs. to centralised resources into the Data Center or even into the cloud Emerging trend where intelligence and functionality features are centralised back to a single location or aggregation Think of Wireless LAN. Where a relative number of non-intelligent access points feed-up into centralised controllers that provide all the intelligence and functionality for the whole wireless LAN Now think of GPON as the other disruptive technology where again we are using passive technology down to the desktop and then centralise a lot of the intelligence at the aggregation or core layer within that architecture. Taking unnecessary intelligence and functionality away from the edge in order to create a more efficient architecture

8 Different PON Technologies ( B PON G PON E PON ) PON (Passive Optical Network) is a point-to-multipoint network architecture in which unpowered optical splitters are used to enable a single optical fiber to serve multiple premises / users BPON (Broadband PON) is a standard based on APON GPON (Gigabit PON) is an evolution of the BPON standard - based on the ITU standard (ITU-G.984) Asymmetrical bandwidth 2.4Gbs / 1.25Gbs EPON (Ethernet PON) is an IEEE standard and is now part of IEEE standard (IEEE 802.3ah) Symmetrical bandwidth 1.25Gbs / 1.25Gbs Fundamentally GPON and EPON are based on the same technology principles

9 GPON Details Single, singlemode fiber to each work area Downstream up to 1490nm (TDM) voice, data, switched video Upstream up to 1310nm (TDMA) voice, data, signaling video WDM video (RF/Analog) 1550nm All simultaneous ITU G.984 standard recommendations Technically Future Proof (Passive Components) SM fiber has an unknown bandwidth limitation. Until electronics reach the limit, glass manufacturers will not design next generation singlemode Upgrades to the next generation are as simple as replacing the electronics

10 PON Facts and Benefits No power required from the data center to the user area Up to 50% reduction in power consumption Multiple buildings served by one main equipment room Significantly reduced cabling construction costs Reduced bulk allow for more flexible architectural design considerations Uses a single strand of single-mode graded fiber.

11 Lower future expansion costs PON Facts and Benefits Technically Future Proof (Passive Components) - SM fiber has an unknown bandwidth limitation. - Upgrades to the next generation are as simple as replacing the electronics (More on that later)

12 Active Components Located in the MDF Optical Line Terminal OLT Located in the Data Center After the Level 3 WAN router Uses GPON protocols Support VLAN (over 4500) 128 bit security encryption Different vendors provide OLT solutions based on same ITU984 standard

13 Active Components Located at the desktop area ONT Optical Network Terminal Located near the user or device 4 RJ45 (10/100/1000) output ports with optional POE Up to 62W* of available POE Standard HVAC is adequate Optional internal or external battery back up. Up to 8 VLAN per port and a max of 16 VLAN per ONT* *Vendor Specific ONT Optical Network Terminal Different vendors provide ONT devises from desk-top to wall-mount - proprietary solution

14 Traditional LAN vs. POL Traditional LAN Optical LAN

15 Basic Premise of Passive Optical LAN Passive Optical LAN Copper based Ethernet LAN Fire Suppression HVAC PON x Floor n Fiber 32 Long PoE Cables Short PoE Cables WLAN Enterprise Aggregation Switch 3 2 Short Long CAT 5/6 CAT 5/6 Access Switches Fiber 1 Heavy Duty Cable Trays Light weight or no Cable Trays Distribution Switch Core Router WAN 56 PON Multi Mode Fiber Ports Single Mode Fiber (20km reach) AC 4 PON 1 Access Switches Floor Fiber 8 Fiber 1 Long PoE Cables Heavy Duty Cable Trays Light weight or no Cable Trays WGT s 4 port Work Group Terminals Short PoE Cables Short CAT 5/6 WLAN Ethernet Ports Served MDF UPS IDF Office Space Long CAT 5/6

16 Basic POL Schematic PASSIVE (No Power Required)

17 Splitter Technology Splitters are passive components representing an important role in Passive Optical Networks Two types used: Fused Biconilcal Taper (FBT) old technology Planar Lightwave Circuit (PLC) latest technology Multiple input (M) and multiple output (N) 1x2 / 1x8 / 1x16 / 1x32 / 2x32 PLC Splitter, based on silica optical waveguide technology and precision aligning process Theoretical loss for a 1x32 is 15db good PLC splitter provide <16.5db

18 POL vs. Conventional Cabling The POL solution eliminates cable congestion by using small form factor factory terminated multi fiber cables and MT connectors The POL solution utilizes a single fiber for all services reducing cable bundles. Traditional networks would require a home run from each user for voice, data, and even video. FTTD Cables 144 SM fibers (Data, voice & video) Green Benefits Reduction in non-renewable materials Reduction in power consumption Reduction in cabling costs Floor space savings Ceiling space and fire load savings Conventional Cables 144 MM fiber pairs (Data) 144 copper cables (4-pair, Voice)

19 Traditional Ethernet design YES NO REQUIRES Power HVAC Racking UPS (8) 24 port Workgroup switches per floor Home-run cabling to each user Enterprise Multi-service Router in Data Center

20 POL design YES NO REQUIRES Power HVAC Racking UPS Workgroup switches Home-run cabling Enterprise Multi-service Router in Data Center

21 POL: Total Cost of Ownership Page 21 5/13/2013

22 Design savings using POL Traditional LAN (1Cu Data / 1Cu Voice) Traditional LAN (1 Shared Cu Voice/Data) Passive Optical LAN (PON) Solution 2 Users Per ONT 4 Users Per ONT System 46% System User 73% User System System 28% User User 82% Percentages reflect savings over traditional Savings of cable plant and electronics only Does not include potential OpEx or Labor savings Exact savings may vary by specific design

23 Passive Optical LAN: Power Consumption Comparison

24 2010 Department of Army Directive Technical Guidance for Network Modernization April 23, 2010

25 May 11, 2012 Revised Directive

26 Deployment: Single Wing in Building Environment Cubicles:120 Offices: 20 Printer/Fax: 4 Conf. Rooms: 6 Solution Fiber Hub:1 Terminals: 12 Splices: 0 Field Terminations: 0 Results Duration: 1 Week Gbps Ethernet Ports: 600

27 Deployment: Three Separate Networks Environment Cubicles:204 Offices: 16 Printer/Fax: 16 Conf. Rooms: 10 Solution Fiber Hub:2 Terminals: 18 Splices: 0 Field Terminations: 0 Results Duration: 2 Weeks Gbps Ethernet Ports: 984

28 Deployment: Business Office Environment Cubicles:195 Offices: 8 Conf. Rooms: 10 Solution Fiber Hub:2 Terminals: 24 Splices: 0 Field Terminations: 0 Results Duration: 1 Week Gbps Ethernet Ports: 812

29 OLS Market Drivers Functionality Understand business requirements Rethink and revaluate old assumptions Financial Reconsider procurement What business problem does it solve? Operational Improve efficiency / reduce OPEX

30 PON Users Today Hospitals Campuses Universities Cruise Ships Hotels (Large) Government and Military High Occupancy Buildings (Call Centers) Multi Tenant Units (Commercial and Residential)

31 Optical LAN Solution (OLS) OLS is passive supporting technology for PON / POL architecture over long distances 20km based on pre-terminated MTP/MPO fibre technology to provide a reliable high-density solution Provides disruptive saving based on space reduction, no power and no cooling requirements FULLY PASSIVE TE Connectivity offers a complete, end-to-end network infrastructure solution for Fiber-to-the-Desk (FTTD) networks supporting PON and GPON.

32 Fiber Deployment Strategies Choose Fast & Easy (reduce installation time) Flexibility of deployment (knowing exact distance not a key factor) Extra slack does not affect performance (fiber has low loss per km) Pre-Terminated cable assemblies: pre-tested at the factory (save time on installation and testing) 25-year warranty certifications Page 32 5/13/2013

33 Standards Update In February 2009, the Telecommunications Industry Association TR-42 Engineering Committee published TIA-568-C. 1, which was the first revision to recognize duplex singlemode fiber for use in the horizontal. On August 14, 2012, TR-42 issued an addendum to the TIA-568-C0 Generic Telecommunications Cabling for Customer Premises standard that adds PON technology standards as supported singlemode fiber applications for the LAN. The TIA TR committee plans to have the first iteration of its standard ready for review in early 2013, with the potential for a ballot vote in June Note: PON added to 14 th Edition of TDMM under Horizontal Cabling

34 Project analysis R&D HQ Sweden R&D Engineers 3 Floors 500 drops Design limitations

35 Case Study: TIA Headquarter USA As a standards organization, we are at the forefront of technology, and we realized the PON was one of the latest leading technologies we wanted to embrace, says Tony Zarafshar, the IT manager for TIA.

36 For additional information

37 A thought to close with Insanity: doing the same thing over and over again and expecting different results.it s now the time for a new change!!

38 Questions and close Luca Rozzoni RCDD Business Development Manager EMEA / ANZ / India luca.rozzoni@te.com