INITIAL TYPE TESTING REPORT This ITT report contains revised and/or additional grading machine settings to those given in EN :2009.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "INITIAL TYPE TESTING REPORT This ITT report contains revised and/or additional grading machine settings to those given in EN :2009."

Transcription

1 `Report No. ITT/44/19/03 INITIAL TYPE TESTING REPORT This ITT report ontins revised nd/or dditionl grding mhine settings to those given in EN :2009. DATE OF ISSUE 1 Deemer 2010 Note. ITT reports for EN re numered using the initils ITT followed y three numers seprted y slshes. The first numer denotes the numer of eh report in hronologil order. The seond numer denotes the numer for the prtiulr type of grding mhine s given in EN :2009. The third numer gives the report numer for the type of mhine in hronologil order. GRADING MACHINE The settings in this ITT report re relevnt to the MTG 920 without onneted lne timer strength grding mhine. MANUFACTURER The mnufturer of the MTG timer grding mhine is: Brookhuis Miro Eletronis Institutenweg 15, Enshede The Netherlnds REFERENCE Cluse 5 of EN :2009 ontins the following prgrph:- The epted grding mhines nd settings in this Europen Stndrd re sed on initil type testing (ITT) nd initil type lultion (ITC). When dditionl ITT nd ITC doumenttion from the mnufturers hs een evluted y CEN/TC124/TG1 nd the epted vlues re given in n ITT report, whih is the sis for ertifition y the Notified Bodies overseeing the produers ftory prodution ontrol (FPC). Those ITT reports my e used s ITT doumenttion efore the informtion they ontin eomes ville in n mendment or revision of this Europen Stndrd, EN This ITT report is one of numer of reports to whih the ove prgrph refers nd my therefore e used s doumenttion prior to further revision of EN , or until it is superseded y lter dted ITT report for the sme grding mhine. CHANGES TO SETTINGS LISTED IN EN :2009 The settings listed in the following tles 19-1 to 19-4, whih re the sujet of the reserh reports listed in the tle titles, hve een ssessed y CEN TC124/TG1 nd re pproved for use in the prodution of struturl timer to EN from the dte of this ITT report. The existing tles 19-1 to 19-4 given in ITT/19/19/02 re superseded y the tles given in this ITT report. On ehlf of CEN TC 124/TG1 Signture of onvenor Dte 15 Novemer

2 Cen TC124/TG1 INITIAL TYPE TESTING REPORT No. ITT/44/19/03; 1 Deemer 2010 Finlnd Russi Sweden Tle 19-1 Settings for Timer Grder MTG 920 without onneted lne (Model given in TG1/0508/06) Speies Permitted FI RU SE Sprue Pie Aies 35 t n n 220 grde d 43,8 40,9 30,9 49,1 33,0 31,0 41,5 28, Requirements for grding: - Timer surfe plned or swn; - Timer temperture > 0 C; - Men moisture ontent of th shll e etween 10% nd 25% nd ll piees in the th shll not devite y more thn four perentge points from the men; - Grding proedure ording to the Timer Grder MTG mnul from Brookhuis Miro-Eletronis; - Grding to e in with the visul override requirements ording to Tle 1 of EN :2005; - Mesuring surfe on either end to e irulr swn flt; - Grding set-up ording to the requirements in the Timer Grder MTG tehnil speifitions of BME; - Mrking is not utomti so extr requirements for Ftory Prodution Control re required. - The settings pply for the Timer Grder MTG with either the internl or externl hmmer d The k v ftor of EN 384 is not pplied for the derivtion of the settings. Timer sizes shll e to EN 336. Settings pply only to timer grown west of the Url mountin rnge in Russi nd north of the 55 lin e of ltitude. Grdes prefixed y C re strength lsses given in EN

3 Cen TC124/TG1 INITIAL TYPE TESTING REPORT No. ITT/44/19/03; 1 Deemer 2010 Finlnd Russi Sweden Tle 19-2 Settings for Timer Grder MTG 920 without onneted lne (Model given in TG1/0508/07) (ontinued) Speies Permitted FI RU SE Pine Pinus Sylvestris 35 t n n 220 grde d 39,7 35,8 28,2 41,2 35,0 30,3 39,3 24, Requirements for grding: - Timer surfe plned or swn; - Timer temperture > 0 C; - Men moisture ontent of th shll e etween 10% nd 25% nd ll piees in the th shll not devite y more thn four perentge points from the men; - Grding proedure ording to the Timer Grder MTG mnul from Brookhuis Miro-Eletronis; - Grding to e in with the visul override requirements ording to Tle 1 of EN :2005; - Mesuring surfe on either end to e irulr swn flt; - Grding set-up ording to the requirements in the Timer Grder MTG tehnil speifitions of BME; - Mrking is not utomti so extr requirements for Ftory Prodution Control re required. - The settings pply for the Timer Grder MTG with either the internl or externl hmmer d The k v ftor of EN 384 is not pplied for the derivtion of the settings. Timer sizes shll e to EN 336. Settings pply only to timer grown west of the Url mountin rnge in Russi nd north of the 55 lin e of ltitude. Grdes prefixed y C re strength lsses given in EN

4 Cen TC124/TG1 INITIAL TYPE TESTING REPORT No. ITT/44/19/03; 1 Deemer 2010 Frne Germny Netherlnds Itly Tle 19-3 Settings for Timer Grder MTG 920 without onneted lne (Model given in TG1/0609/09rev) (ontinued) Speies Permitted FR DE NL IT Dougls fir Pseudotsug menziesii 34 t n n 218 grde 55,9 40,7 18,7 49,1 43,5 18, Requirements for grding: - Timer surfe plned or swn; - Timer temperture > 0 C; - Men moisture ontent of th shll e etween 10% nd 25% nd ll piees in the th shll not devite y more thn four perentge points from the men; - Grding proedure ording to the Timer Grder MTG mnul from Brookhuis Miro-Eletronis; - Grding to e in with the visul override requirements ording to Tle 1 of EN :2005; - Mesuring surfe on either end to e irulr swn flt; - Grding set-up ording to the requirements in the Timer Grder MTG tehnil speifitions of BME; - Mrking is not utomti so extr requirements for Ftory Prodution Control re required. - The settings pply for the Timer Grder MTG with either the internl or externl hmmer Timer sizes shll e to EN 336. Grdes prefixed y C re strength lsses given in EN 338. The k v ftor of EN 384 is not pplied for the derivtion of the settings. 4

5 Cen TC124/TG1 INITIAL TYPE TESTING REPORT No. ITT/44/19/03; 1 Deemer 2010 Austri Belgium Germny Itly Czeh Repuli Tle 19-4 Settings for Timer Grder MTG 920 without onneted lne (Model given in TG1/1108/21RevC) (ontinued) Speies Permitted AT BE DE IT CZ Sprue Pie Aies 32 t n n 310 grde 51,5 35,9 31,8 51,5 35,9 25,9 39,8 29,5 39,8 22,8 26, , C27 40,1 23, ,4 31, ,3 26, , , Timer sizes shll e to EN 336. Grdes prefixed y C re strength lsses given in EN 338. Requirements for grding: - Timer surfe plned or swn; - Timer temperture > 0 C; - Men moisture ontent of th shll e etween 10% nd 25% nd ll piees in the th shll not devite y more thn four perentge points from the men; - Grding proedure ording to the Timer Grder MTG mnul from Brookhuis Miro-Eletronis; - Grding to e in with the visul override requirements ording to Tle 1 of EN :2005; - Mesuring surfe on either end to e irulr swn flt; - Grding set-up ording to the requirements in the Timer Grder MTG tehnil speifitions of BME; - Mrking is not utomti so extr requirements for Ftory Prodution Control re required. - The settings pply for the Timer Grder MTG with either the internl or externl hmmer The k v ftor of EN 384 is not pplied for the derivtion of the settings. 5

The following information must be known for the correct selection of current measurement transformer (measurement or protection):

The following information must be known for the correct selection of current measurement transformer (measurement or protection): P 5 Protetion trnsformers P.5.01 GB Protetion trnsformers The following informtion must e known for the orret seletion of urrent mesurement trnsformer (mesurement or protetion): The pplition for whih it

More information

7 mm Diameter Miniature Cermet Trimmer

7 mm Diameter Miniature Cermet Trimmer 7 mm Dimeter Miniture Cermet Trimmer A dust seled plsti se proteting qulity ermet trk gurntees high performne nd proven reliility. Adjustments re mde esier y the ler sle redings. is idelly suited to ll

More information

European Convention on Products Liability in regard to Personal Injury and Death

European Convention on Products Liability in regard to Personal Injury and Death Europen Trety Series - No. 91 Europen Convention on Produts Liility in regrd to Personl Injury nd Deth Strsourg, 27.I.1977 The memer Sttes of the Counil of Europe, signtory hereto, Considering tht the

More information

Quick Guide to Lisp Implementation

Quick Guide to Lisp Implementation isp Implementtion Hndout Pge 1 o 10 Quik Guide to isp Implementtion Representtion o si dt strutures isp dt strutures re lled S-epressions. The representtion o n S-epression n e roken into two piees, the

More information

European Convention on Social and Medical Assistance

European Convention on Social and Medical Assistance Europen Convention on Soil nd Medil Assistne Pris, 11.XII.1953 Europen Trety Series - No. 14 The governments signtory hereto, eing memers of the Counil of Europe, Considering tht the im of the Counil of

More information

Words Symbols Diagram. abcde. a + b + c + d + e

Words Symbols Diagram. abcde. a + b + c + d + e Logi Gtes nd Properties We will e using logil opertions to uild mhines tht n do rithmeti lultions. It s useful to think of these opertions s si omponents tht n e hooked together into omplex networks. To

More information

D e c i m a l s DECIMALS.

D e c i m a l s DECIMALS. D e i m l s DECIMALS www.mthletis.om.u Deimls DECIMALS A deiml numer is sed on ple vlue. 214.84 hs 2 hundreds, 1 ten, 4 units, 8 tenths nd 4 hundredths. Sometimes different 'levels' of ple vlue re needed

More information

10.3 Systems of Linear Equations: Determinants

10.3 Systems of Linear Equations: Determinants 758 CHAPTER 10 Systems of Equtions nd Inequlities 10.3 Systems of Liner Equtions: Determinnts OBJECTIVES 1 Evlute 2 y 2 Determinnts 2 Use Crmer s Rule to Solve System of Two Equtions Contining Two Vriles

More information

Exhaust System. Table of Contents. Section 6C - Measuring Exhaust Elbow Height

Exhaust System. Table of Contents. Section 6C - Measuring Exhaust Elbow Height Exhust System Mesuring Exhust Elow Height Tle of Contents Setion 6C - Mesuring Exhust Elow Height Mesuring Exhust Elow Height...6C-2 Generl Informtion...6C-2 Bot Requirements...6C-4 Loding Requirements...6C-5

More information

INSTALLATION, OPERATION & MAINTENANCE

INSTALLATION, OPERATION & MAINTENANCE DIESEL PROTECTION SYSTEMS Exhust Temperture Vlves (Mehnil) INSTALLATION, OPERATION & MAINTENANCE Vlve Numer TSZ-135 TSZ-150 TSZ-200 TSZ-275 TSZ-392 DESCRIPTION Non-eletril temperture vlves mnuftured in

More information

The AVL Tree Rotations Tutorial

The AVL Tree Rotations Tutorial The AVL Tree Rottions Tutoril By John Hrgrove Version 1.0.1, Updted Mr-22-2007 Astrt I wrote this doument in n effort to over wht I onsider to e drk re of the AVL Tree onept. When presented with the tsk

More information

Regulatory arrangements for the Qualifications and Credit Framework

Regulatory arrangements for the Qualifications and Credit Framework QCF Regultory rrngements August 2008 Regultory rrngements for the Qulifitions nd Credit Frmework The qulifitions regultors wish to mke their pulitions widely essile. Plese ontt us if you hve ny speifi

More information

Licensed Copy: sheffieldun sheffieldun, na, Thu Sep 21 06:55:05 BST 2006, Uncontrolled Copy, (c) BSI. English version

Licensed Copy: sheffieldun sheffieldun, na, Thu Sep 21 06:55:05 BST 2006, Uncontrolled Copy, (c) BSI. English version EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 13480-2 My 2002 Licensed Copy: sheffieldun sheffieldun, n, Thu Sep 21 06:55:05 BST 2006, Uncontrolled Copy, (c) BSI ICS 23.040.01 Tuyuteries industrielles

More information

11.1 Conic sections (conics)

11.1 Conic sections (conics) . Coni setions onis Coni setions re formed the intersetion of plne with right irulr one. The tpe of the urve depends on the ngle t whih the plne intersets the surfe A irle ws studied in lger in se.. We

More information

THE PYTHAGOREAN THEOREM

THE PYTHAGOREAN THEOREM THE PYTHAGOREAN THEOREM The Pythgoren Theorem is one of the most well-known nd widely used theorems in mthemtis. We will first look t n informl investigtion of the Pythgoren Theorem, nd then pply this

More information

Digital Electronics Basics: Combinational Logic

Digital Electronics Basics: Combinational Logic Digitl Eletronis Bsis: for Bsi Eletronis http://ktse.eie.polyu.edu.hk/eie29 by Prof. Mihel Tse Jnury 25 Digitl versus nlog So fr, our disussion bout eletronis hs been predominntly nlog, whih is onerned

More information

ISTM206: Lecture 3 Class Notes

ISTM206: Lecture 3 Class Notes IST06: Leture 3 Clss otes ikhil Bo nd John Frik 9-9-05 Simple ethod. Outline Liner Progrmming so fr Stndrd Form Equlity Constrints Solutions, Etreme Points, nd Bses The Representtion Theorem Proof of the

More information

VIESMANN. VITODENS AND VITOSOLAR Flue systems for gas condensing boilers 1.9 to 150.0 kw. Technical guide FLUE SYSTEMS VITODENS AND VITOSOLAR

VIESMANN. VITODENS AND VITOSOLAR Flue systems for gas condensing boilers 1.9 to 150.0 kw. Technical guide FLUE SYSTEMS VITODENS AND VITOSOLAR VIESMANN VITODENS AND VITOSOLAR Flue systems f gs ondensing oilers 1.9 to 150.0 kw Tehnil guide FLUE SYSTEMS VITODENS AND VITOSOLAR 5/01 Index Index 1. Flue systems 1. 1 Flue systems... 4 Struturl unit...

More information

Chess and Mathematics

Chess and Mathematics Chess nd Mthemtis in UK Seondry Shools Dr Neill Cooper Hed of Further Mthemtis t Wilson s Shool Mnger of Shool Chess for the English Chess Federtion Mths in UK Shools KS (up to 7 yers) Numers: 5 + 7; x

More information

*These academic programs have no specific Academic Program Rules and therefore are bound entirely by the General Academic Program Rules

*These academic programs have no specific Academic Program Rules and therefore are bound entirely by the General Academic Program Rules Msters Degrees by Reserh (exluding Mster of Philosophy) These progrms re only vilble to Interntionl Students in 2012. Interntionl students seeking to enrol in Msters Degree in Eonomis or Publi Helth must

More information

KEY SKILLS INFORMATION TECHNOLOGY Level 3. Question Paper. 29 January 9 February 2001

KEY SKILLS INFORMATION TECHNOLOGY Level 3. Question Paper. 29 January 9 February 2001 KEY SKILLS INFORMATION TECHNOLOGY Level 3 Question Pper 29 Jnury 9 Ferury 2001 WHAT YOU NEED This Question Pper An Answer Booklet Aess to omputer, softwre nd printer You my use ilingul ditionry Do NOT

More information

End-to-end development solutions

End-to-end development solutions TECHNICAL SERVICES Endtoend development solutions Mnged y TFE HOTELS TFE Hotels re the only Austrlin Hotel group with inhouse end to end development solutions. We hve expertise in Arhiteturl nd Interior

More information

TOA RANGATIRA TRUST. Deed of Trust 3714386.2

TOA RANGATIRA TRUST. Deed of Trust 3714386.2 TOA RANGATIRA TRUST Deed of Trust 1 Deed dted 2011 Prties 1 Te Runng o To Rngtir Inorported n inorported soiety hving its registered offie t Poriru (the Runng ) Bkground A B C D The Runng is n inorported

More information

Chapter. Contents: A Constructing decimal numbers

Chapter. Contents: A Constructing decimal numbers Chpter 9 Deimls Contents: A Construting deiml numers B Representing deiml numers C Deiml urreny D Using numer line E Ordering deimls F Rounding deiml numers G Converting deimls to frtions H Converting

More information

Know the sum of angles at a point, on a straight line and in a triangle

Know the sum of angles at a point, on a straight line and in a triangle 2.1 ngle sums Know the sum of ngles t point, on stright line n in tringle Key wors ngle egree ngle sum n ngle is mesure of turn. ngles re usully mesure in egrees, or for short. ngles tht meet t point mke

More information

PROJECTILE MOTION PRACTICE QUESTIONS (WITH ANSWERS) * challenge questions

PROJECTILE MOTION PRACTICE QUESTIONS (WITH ANSWERS) * challenge questions PROJECTILE MOTION PRACTICE QUESTIONS (WITH ANSWERS) * hllenge questions e The ll will strike the ground 1.0 s fter it is struk. Then v x = 20 m s 1 nd v y = 0 + (9.8 m s 2 )(1.0 s) = 9.8 m s 1 The speed

More information

excenters and excircles

excenters and excircles 21 onurrene IIi 2 lesson 21 exenters nd exirles In the first lesson on onurrene, we sw tht the isetors of the interior ngles of tringle onur t the inenter. If you did the exerise in the lst lesson deling

More information

the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord

the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord Quik Setup Guide Strt Here MFC-J450DW MFC-J470DW Thnk you for hoosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother produt is engineered nd mnuftured to the highest stndrds

More information

Fractions: Arithmetic Review

Fractions: Arithmetic Review Frtions: Arithmeti Review Frtions n e interprete s rtios omprisons of two quntities. For given numer expresse in frtion nottion suh s we ll the numertor n the enomintor n it is helpful to interpret this

More information

Tallahassee Community College. Simplifying Radicals

Tallahassee Community College. Simplifying Radicals Tllhssee Communit College Simplifing Rdils The squre root of n positive numer is the numer tht n e squred to get the numer whose squre root we re seeking. For emple, 1 euse if we squre we get 1, whih is

More information

TDMMH1607A DETERMINE POSITION OF THE VESSEL

TDMMH1607A DETERMINE POSITION OF THE VESSEL TDMMH1607A DETERMINE POSITION OF THE VESSEL Revision Numer: 1 TDMMH1607A DETERMINE POSITION OF THE VESSEL Modifition History Not pplile. Unit Desriptor UNIT DESCRIPTOR: This unit involves the skills nd

More information

Simple Nonlinear Graphs

Simple Nonlinear Graphs Simple Nonliner Grphs Curriulum Re www.mthletis.om Simple SIMPLE Nonliner NONLINEAR Grphs GRAPHS Liner equtions hve the form = m+ where the power of (n ) is lws. The re lle Liner euse their grphs re stright

More information

Radial blowers with AC motor

Radial blowers with AC motor Rdil lowers with AC motor Generl informtion Desription 32 Rdil lowers, motor diretly mounted RL, RLF, RLD, RLA, RLE, RLS 33 Rdil lowers with doule housing 37 Rdil lowers, motor deoupled mounted, high temperture

More information

It may be helpful to review some right triangle trigonometry. Given the right triangle: C = 90º

It may be helpful to review some right triangle trigonometry. Given the right triangle: C = 90º Ryn Lenet Pge 1 Chemistry 511 Experiment: The Hydrogen Emission Spetrum Introdution When we view white light through diffrtion grting, we n see ll of the omponents of the visible spetr. (ROYGBIV) The diffrtion

More information

V bulb = V/N = (110 V)/8 = 13.8 V. We find the resistance of each bulb from 2 bulb bulb 7.0 W = (13.8 V) 2 /R bulb, which gives R bulb = 27 Ω.

V bulb = V/N = (110 V)/8 = 13.8 V. We find the resistance of each bulb from 2 bulb bulb 7.0 W = (13.8 V) 2 /R bulb, which gives R bulb = 27 Ω. HPTE iruits 4. We fin the internl resistne from V = r; 9.8 V = [.0 V (60 )r], whih gives r = 0.037 Ω. euse the terminl voltge is the voltge ross the strter, we hve V = ; 9.8 V = (60 ), whih gives = 0.6

More information

Essential Question What are the Law of Sines and the Law of Cosines?

Essential Question What are the Law of Sines and the Law of Cosines? 9.7 TEXS ESSENTIL KNOWLEDGE ND SKILLS G.6.D Lw of Sines nd Lw of osines Essentil Question Wht re the Lw of Sines nd the Lw of osines? Disovering the Lw of Sines Work with prtner.. opy nd omplete the tle

More information

Student Access to Virtual Desktops from personally owned Windows computers

Student Access to Virtual Desktops from personally owned Windows computers Student Aess to Virtul Desktops from personlly owned Windows omputers Mdison College is plesed to nnoune the ility for students to ess nd use virtul desktops, vi Mdison College wireless, from personlly

More information

MyAccounts. GE Capital LIBOR FUNCTIONALITY USER REFERENCE GUIDE. MyAccounts LIBOR functionality enables borrowers to:

MyAccounts. GE Capital LIBOR FUNCTIONALITY USER REFERENCE GUIDE. MyAccounts LIBOR functionality enables borrowers to: GE Cpitl LIBOR FUNCTIONALITY USER REFERENCE GUIDE MyAounts LIBOR funtionlity enles orrowers to: Continue or onvert mturing LIBOR rte lon Request new LIBOR rte lon Convert from se rte lon to LIBOR rte lon

More information

Pythagoras theorem is one of the most popular theorems. Paper Folding And The Theorem of Pythagoras. Visual Connect in Teaching.

Pythagoras theorem is one of the most popular theorems. Paper Folding And The Theorem of Pythagoras. Visual Connect in Teaching. in the lssroom Visul Connet in Tehing Pper Folding And The Theorem of Pythgors Cn unfolding pper ot revel proof of Pythgors theorem? Does mking squre within squre e nything more thn n exerise in geometry

More information

GRADE 7 ADAPTED NJDOE ASSESSMENT. Assessed Standards: 7.NS.1 7.NS.2 7.NS.3. (To be administered after NPS Grade 7 Scope and Sequence Units 1&2)

GRADE 7 ADAPTED NJDOE ASSESSMENT. Assessed Standards: 7.NS.1 7.NS.2 7.NS.3. (To be administered after NPS Grade 7 Scope and Sequence Units 1&2) ADAPTED NJDOE ASSESSMENT GRADE 7 (To e dministered fter NPS Grde 7 Scope nd Sequence Units &2) Assessed Stndrds: 7.NS. 7.NS.2 7.NS.3 The Newrk Pulic Schools - Office of Mthemtics 203 Nme Period Dte Grde

More information

BYG DTU. European Spruce picea abies graded by Chinese visual rules. Hilmer Riberholt. Rapport R ISSN ISBN

BYG DTU. European Spruce picea abies graded by Chinese visual rules. Hilmer Riberholt. Rapport R ISSN ISBN BYG DTU Hilmer Riberholt Europen Spruce pice bies grded by Chinese visul rules DANMARKS T E K N I S K E UNIVERSITET Rpport BYG DTU R-182 2008 ISSN 1601-2917 ISBN 9788778772572 Europen Spruce pice bies

More information

ENGR HOMEWORK-6-SOLUTIONS

ENGR HOMEWORK-6-SOLUTIONS ENGR -215 HOMEWORK-6-SOLUTIONS 1. Exercise 26.5 2. Exercise 26.6 3. Exercise 26.31 4. Exercise 26.32 5. Exercise 26.36 6. Exercise 26.4 7. Exercise 26.43 8. Exercise 26.54 9. Prolem 26.64 1. Prolem 26.67

More information

Start Here. Quick Setup Guide MFC-8710DW MFC-8810DW MFC-8910DW. the machine and check the components

Start Here. Quick Setup Guide MFC-8710DW MFC-8810DW MFC-8910DW. the machine and check the components Quik Setup Guide Strt Here MFC-8710DW MFC-8810DW MFC-8910DW Thnk you for hoosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother produt is engineered nd mnuftured to the highest

More information

VIESMANN. VITODENS Flue systems for gas condensing boilers 3.8 to 105.0 kw. Technical guide VITODENS FLUE SYSTEMS

VIESMANN. VITODENS Flue systems for gas condensing boilers 3.8 to 105.0 kw. Technical guide VITODENS FLUE SYSTEMS VIESMNN VITODENS Flue systems for gs ondensing oilers 3.8 to 105.0 kw Tehnil guide VITODENS FLUE SYSTEMS 5/011 Index Index 1. Flue systems 1.1... 4 Struturl unit... 4 System ertifition... 4 1. Blned flue

More information

Trowel Notch Sizes for Installation of Floor Coverings, Wood Flooring and Tiles

Trowel Notch Sizes for Installation of Floor Coverings, Wood Flooring and Tiles TKB-Tehnil Briefing Note 6 Trowel Noth s for Instlltion of Floor Coverings, Wood Flooring nd Tiles Version: My 2007 Prepred y the Tehnishe Kommission Buklestoffe (TKB) (Tehnil Commission on Constrution

More information

Electrical measurement and control M.7. Measurement Transformers and Shunts

Electrical measurement and control M.7. Measurement Transformers and Shunts Eletril mesurement nd ontrol M.7 Mesurement Trnsformers nd Shunts M.7 Mesurement Trnsformers nd Shunts M7 - Mesurement trnsformers nd Shunts TC series TCH TA TP Nrrow-profile urrent trnsformer.................................................................

More information

Ratio and Proportion

Ratio and Proportion Rtio nd Proportion Rtio: The onept of rtio ours frequently nd in wide vriety of wys For exmple: A newspper reports tht the rtio of Repulins to Demorts on ertin Congressionl ommittee is 3 to The student/fulty

More information

Right Triangle Trigonometry

Right Triangle Trigonometry CONDENSED LESSON 1.1 Right Tringle Trigonometr In this lesson ou will lern out the trigonometri rtios ssoited with right tringle use trigonometri rtios to find unknown side lengths in right tringle use

More information

11. PYTHAGORAS THEOREM

11. PYTHAGORAS THEOREM 11. PYTHAGORAS THEOREM 11-1 Along the Nile 2 11-2 Proofs of Pythgors theorem 3 11-3 Finding sides nd ngles 5 11-4 Semiirles 7 11-5 Surds 8 11-6 Chlking hndll ourt 9 11-7 Pythgors prolems 10 11-8 Designing

More information

c b 5.00 10 5 N/m 2 (0.120 m 3 0.200 m 3 ), = 4.00 10 4 J. W total = W a b + W b c 2.00

c b 5.00 10 5 N/m 2 (0.120 m 3 0.200 m 3 ), = 4.00 10 4 J. W total = W a b + W b c 2.00 Chter 19, exmle rolems: (19.06) A gs undergoes two roesses. First: onstnt volume @ 0.200 m 3, isohori. Pressure inreses from 2.00 10 5 P to 5.00 10 5 P. Seond: Constnt ressure @ 5.00 10 5 P, isori. olume

More information

SE3BB4: Software Design III Concurrent System Design. Sample Solutions to Assignment 1

SE3BB4: Software Design III Concurrent System Design. Sample Solutions to Assignment 1 SE3BB4: Softwre Design III Conurrent System Design Winter 2011 Smple Solutions to Assignment 1 Eh question is worth 10pts. Totl of this ssignment is 70pts. Eh ssignment is worth 9%. If you think your solution

More information

Qualmark Licence Agreement

Qualmark Licence Agreement Terms nd Conditions Qulmrk Liene Agreement Terms nd Conditions Terms nd Conditions 1. Liene Holder Applint 2. Confirmed Sttus 3. Term nd Renewl 4. Use of the Intelletul Property 5. Qulmrk Progrmme Rtings

More information

NQF Level: 2 US No: 7480

NQF Level: 2 US No: 7480 NQF Level: 2 US No: 7480 Assessment Guide Primry Agriculture Rtionl nd irrtionl numers nd numer systems Assessor:.......................................... Workplce / Compny:.................................

More information

Module 5. Three-phase AC Circuits. Version 2 EE IIT, Kharagpur

Module 5. Three-phase AC Circuits. Version 2 EE IIT, Kharagpur Module 5 Three-hse A iruits Version EE IIT, Khrgur esson 8 Three-hse Blned Suly Version EE IIT, Khrgur In the module, ontining six lessons (-7), the study of iruits, onsisting of the liner elements resistne,

More information

For personal use only

For personal use only For personl use only 9 SPOKES INTERNATIONAL LIMITED EMPLOYEE SHARE OPTION SCHEME For personl use only Confidentil 1 PURPOSE This is the 9 Spokes Interntionl Limited Employee Shre Option Sheme. The purpose

More information

the machine and check the components

the machine and check the components Quik Setup Guide Strt Here MFC-7360N MFC-7460DN Plese red the Sfety nd Legl ooklet first efore you set up your mhine. Then, plese red this Quik Setup Guide for the orret setup nd instlltion. To view the

More information

the machine and check the components Introductory Ink Cartridges

the machine and check the components Introductory Ink Cartridges Quik Setup Guide Strt Here MFC-J450DW MFC-J470DW Plese red the Produt Sfety Guide first efore you set up your mhine. Then, plese red this Quik Setup Guide for the orret setup nd instlltion. WARNING CAUTION

More information

Functions A B C D E F G H I J K L. Contents:

Functions A B C D E F G H I J K L. Contents: Funtions Contents: A reltion is n set of points whih onnet two vriles. A funtion, sometimes lled mpping, is reltion in whih no two different ordered pirs hve the sme -oordinte or first omponent. Algeri

More information

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Product Registration Sheet (USA only)

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Product Registration Sheet (USA only) Quik Setup Guide Strt Here DCP-J140W Thnk you for hoosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother produt is engineered nd mnuftured to the highest stndrds to deliver

More information

Proving the Pythagorean Theorem

Proving the Pythagorean Theorem Proving the Pythgoren Theorem Proposition 47 of Book I of Eulid s Elements is the most fmous of ll Eulid s propositions. Disovered long efore Eulid, the Pythgoren Theorem is known y every high shool geometry

More information

Thank you for participating in Teach It First!

Thank you for participating in Teach It First! Thnk you for prtiipting in Teh It First! This Teh It First Kit ontins Common Core Coh, Mthemtis teher lesson followed y the orresponding student lesson. We re onfident tht using this lesson will help you

More information

The area of the larger square is: IF it s a right triangle, THEN + =

The area of the larger square is: IF it s a right triangle, THEN + = 8.1 Pythgoren Theorem nd 2D Applitions The Pythgoren Theorem sttes tht IF tringle is right tringle, THEN the sum of the squres of the lengths of the legs equls the squre of the hypotenuse lengths. Tht

More information

London Charterers Clauses 2015/2016

London Charterers Clauses 2015/2016 London Chrterers Cluses 2015/2016 STEAMSHIP MUTUAL UNDERWRITING ASSOCIATION LIMITED Authorised y the Prudentil Regultion Authority nd regulted y the Finnil Condut Authority nd Prudentil Regultion Authority

More information

Test Management using Telelogic DOORS. Francisco López Telelogic DOORS Specialist

Test Management using Telelogic DOORS. Francisco López Telelogic DOORS Specialist Test Mngement using Telelogic DOORS Frncisco López Telelogic DOORS Specilist Introduction Telelogic solution for Requirements Mngement DOORS Requirements mngement nd trcebility pltform for complex systems

More information

Circuit Analysis. Lesson #2. BME 372 Electronics I J.Schesser

Circuit Analysis. Lesson #2. BME 372 Electronics I J.Schesser Ciruit Anlysis Lesson # BME 37 Eletronis J.Shesser 67 oltge Division The voltge ross impednes in series divides in proportion to the impednes. b n b b b b ( ; KL Ohm's Lw BME 37 Eletronis J.Shesser i i

More information

Simple Electric Circuits

Simple Electric Circuits Simple Eletri Ciruits Gol: To uild nd oserve the opertion of simple eletri iruits nd to lern mesurement methods for eletri urrent nd voltge using mmeters nd voltmeters. L Preprtion Eletri hrges move through

More information

The Math Learning Center PO Box 12929, Salem, Oregon 97309 0929 Math Learning Center

The Math Learning Center PO Box 12929, Salem, Oregon 97309 0929  Math Learning Center Resource Overview Quntile Mesure: Skill or Concept: 1010Q Determine perimeter using concrete models, nonstndrd units, nd stndrd units. (QT M 146) Use models to develop formuls for finding res of tringles,

More information

Electrical measurement and control. Measurement Transformers and Shunts

Electrical measurement and control. Measurement Transformers and Shunts Eletril mesurement nd ontrol Mesurement Trnsformers nd Shunts M7 serie MC-1 Mesurement Trnsformers nd Shunts Single-phse Effiient urrent trnsformers... M7-7 serie MC-3 Three-phse Effiient urrent trnsformers...

More information

SOLVING EQUATIONS BY FACTORING

SOLVING EQUATIONS BY FACTORING 316 (5-60) Chpter 5 Exponents nd Polynomils 5.9 SOLVING EQUATIONS BY FACTORING In this setion The Zero Ftor Property Applitions helpful hint Note tht the zero ftor property is our seond exmple of getting

More information

National greenhouse gas inventory data for the period 1990 2010

National greenhouse gas inventory data for the period 1990 2010 United Ntions FCCC/SBI/2012/31 Distr.: Generl 16 November 2012 Originl: English Subsidiry Body for Implementtion Thirty-seventh session Doh, 26 November to 1 December 2012 Item 3(b) of the provisionl gend

More information

Template deed of assignment of intellectual property

Template deed of assignment of intellectual property Templte deed of ssignment of intellectul property User notes This document is intended for use y the founders of strt up compny to formlly trnsfer intellectul property relevnt to the usiness, products

More information

VMware Horizon FLEX Administration Guide

VMware Horizon FLEX Administration Guide VMwre Horizon FLEX Administrtion Guide Horizon FLEX 1.0 This doument supports the version of eh produt listed nd supports ll susequent versions until the doument is repled y new edition. To hek for more

More information

11. Fourier series. sin mx cos nx dx = 0 for any m, n, sin 2 mx dx = π.

11. Fourier series. sin mx cos nx dx = 0 for any m, n, sin 2 mx dx = π. . Fourier series Summry of the bsic ides The following is quick summry of the introductory tretment of Fourier series in MATH. We consider function f with period π, tht is, stisfying f(x + π) = f(x) for

More information

The Pythagorean Theorem Tile Set

The Pythagorean Theorem Tile Set The Pythgoren Theorem Tile Set Guide & Ativities Creted y Drin Beigie Didx Edution 395 Min Street Rowley, MA 01969 www.didx.om DIDAX 201 #211503 1. Introdution The Pythgoren Theorem sttes tht in right

More information

Scan Tool Software Applications Installation and Updates

Scan Tool Software Applications Installation and Updates Sn Tool Softwre Applitions Instlltion nd Updtes Use this doument to: Unlok softwre pplitions on Sn Tool Instll new softwre pplitions on Sn Tool Instll the NGIS Softwre Suite pplitions on Personl Computer

More information

Start Here. Quick Setup Guide. the machine and check the components DCP-9020CDW

Start Here. Quick Setup Guide. the machine and check the components DCP-9020CDW Quik Setup Guide Strt Here DCP-9020CDW Plese red the Produt Sfety Guide first, then red this Quik Setup Guide for the orret setup nd instlltion proedure. To view the Quik Setup Guide in other lnguges,

More information

Welding procedure qualification tests of steels for hull construction and marine structures

Welding procedure qualification tests of steels for hull construction and marine structures (June 2005) (Rev.1 Nov 2006) (Rev.2 Mr 2012) Welding procedure qulifiction tests of steels for hull construction nd mrine structures 1. Scope 1.1 This document gives requirements for qulifiction tests

More information

Version 001 CIRCUITS holland (1290) 1

Version 001 CIRCUITS holland (1290) 1 Version CRCUTS hollnd (9) This print-out should hve questions Multiple-choice questions my continue on the next column or pge find ll choices efore nswering AP M 99 MC points The power dissipted in wire

More information

UNIVERSITY AND WORK-STUDY EMPLOYERS WEBSITE USER S GUIDE

UNIVERSITY AND WORK-STUDY EMPLOYERS WEBSITE USER S GUIDE UNIVERSITY AND WORK-STUDY EMPLOYERS WEBSITE USER S GUIDE Tble of Contents 1 Home Pge 1 2 Pge 2 3 Your Control Pnel 3 4 Add New Job (Three-Step Form) 4-6 5 Mnging Job Postings (Mnge Job Pge) 7-8 6 Additionl

More information

1. Area under a curve region bounded by the given function, vertical lines and the x axis.

1. Area under a curve region bounded by the given function, vertical lines and the x axis. Ares y Integrtion. Are uner urve region oune y the given funtion, vertil lines n the is.. Are uner urve region oune y the given funtion, horizontl lines n the y is.. Are etween urves efine y two given

More information

Section 5-4 Trigonometric Functions

Section 5-4 Trigonometric Functions 5- Trigonometric Functions Section 5- Trigonometric Functions Definition of the Trigonometric Functions Clcultor Evlution of Trigonometric Functions Definition of the Trigonometric Functions Alternte Form

More information

the machine and check the components Drum Unit and Toner Cartridge Assembly (pre-installed)

the machine and check the components Drum Unit and Toner Cartridge Assembly (pre-installed) Quik Setup Guide Strt Here HL-2280DW Plese red the Sfety nd Legl ooklet first efore you set up your mhine. Then, plese red this Quik Setup Guide for the orret setup nd instlltion. To view the Quik Setup

More information

Density Curve. Continuous Distributions. Continuous Distribution. Density Curve. Meaning of Area Under Curve. Meaning of Area Under Curve

Density Curve. Continuous Distributions. Continuous Distribution. Density Curve. Meaning of Area Under Curve. Meaning of Area Under Curve Continuous Distributions Rndom Vribles of the Continuous Tye Density Curve Perent Density funtion f () f() A smooth urve tht fit the distribution 6 7 9 Test sores Density Curve Perent Probbility Density

More information

Start Here. Quick Setup Guide. the machine and check the components. NOTE Not all models are available in all countries.

Start Here. Quick Setup Guide. the machine and check the components. NOTE Not all models are available in all countries. Quik Setup Guide Strt Here HL-3140CW / HL-3150CDN HL-3150CDW / HL-3170CDW Thnk you for hoosing Brother, your support is importnt to us nd we vlue your usiness. Your Brother produt is engineered nd mnuftured

More information

1. Definition, Basic concepts, Types 2. Addition and Subtraction of Matrices 3. Scalar Multiplication 4. Assignment and answer key 5.

1. Definition, Basic concepts, Types 2. Addition and Subtraction of Matrices 3. Scalar Multiplication 4. Assignment and answer key 5. . Definition, Bsi onepts, Types. Addition nd Sutrtion of Mtries. Slr Multiplition. Assignment nd nswer key. Mtrix Multiplition. Assignment nd nswer key. Determinnt x x (digonl, minors, properties) summry

More information

Sirindhorn International Institute of Technology Thammasat University at Rangsit

Sirindhorn International Institute of Technology Thammasat University at Rangsit Sirindhorn Interntionl Institute of Technology Thmmst University t Rngsit School of Informtion, Computer nd Communiction Technology COURSE : ECS 204 Bsic Electricl Engineering L INSTRUCTOR : Asst. Prof.

More information

McAfee Network Security Platform

McAfee Network Security Platform XC-240 Lod Blner Appline Quik Strt Guide Revision D MAfee Network Seurity Pltform This quik strt guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform XC-240 Lod Blner. The SFP+

More information

Or more simply put, when adding or subtracting quantities, their uncertainties add.

Or more simply put, when adding or subtracting quantities, their uncertainties add. Propgtion of Uncertint through Mthemticl Opertions Since the untit of interest in n eperiment is rrel otined mesuring tht untit directl, we must understnd how error propgtes when mthemticl opertions re

More information

Enterprise Digital Signage Create a New Sign

Enterprise Digital Signage Create a New Sign Enterprise Digitl Signge Crete New Sign Intended Audiene: Content dministrtors of Enterprise Digitl Signge inluding stff with remote ess to sign.pitt.edu nd the Content Mnger softwre pplition for their

More information

DEUTSCHE NORM DIN EN

DEUTSCHE NORM DIN EN DEUTSCHE NORM DIN EN 13476-3 D April 2009 ICS 93.030 Supersedes DIN EN 13476-3:2007-08 Plstics piping systems for non-pressure underground dringe nd sewerge Structured-wll piping systems of unplsticized

More information

Additional Protocol to the Convention on Human Rights and Biomedicine concerning Genetic Testing for Health Purposes

Additional Protocol to the Convention on Human Rights and Biomedicine concerning Genetic Testing for Health Purposes Council of Europe Trety Series - No. 203 Additionl Protocol to the Convention on Humn Rights nd Biomedicine concerning Genetic Testing for Helth Purposes Strsourg, 27.XI.2008 2 CETS 203 Humn Rights nd

More information

8.2 Trigonometric Ratios

8.2 Trigonometric Ratios 8.2 Trigonometri Rtios Ojetives: G.SRT.6: Understnd tht y similrity, side rtios in right tringles re properties of the ngles in the tringle, leding to definitions of trigonometri rtios for ute ngles. For

More information

Practice Test 2. a. 12 kn b. 17 kn c. 13 kn d. 5.0 kn e. 49 kn

Practice Test 2. a. 12 kn b. 17 kn c. 13 kn d. 5.0 kn e. 49 kn Prtie Test 2 1. A highwy urve hs rdius of 0.14 km nd is unnked. A r weighing 12 kn goes round the urve t speed of 24 m/s without slipping. Wht is the mgnitude of the horizontl fore of the rod on the r?

More information

In the following there are presented four different kinds of simulation games for a given Büchi automaton A = :

In the following there are presented four different kinds of simulation games for a given Büchi automaton A = : Simultion Gmes Motivtion There re t lest two distinct purposes for which it is useful to compute simultion reltionships etween the sttes of utomt. Firstly, with the use of simultion reltions it is possile

More information

Assembly & Installation Instructions: Impulse 2-Leg Workcenter IM3E48-78-30D-X

Assembly & Installation Instructions: Impulse 2-Leg Workcenter IM3E48-78-30D-X Assemly & Instlltion Instrutions: Impulse -Leg Workenter IM3E48-78-30D-X Prts Inluded, Frme Set A Impulse Bse Assemly Qty: D M5 0 mm Phillips Wood Srews Qty: 8 M0 35 mm Soket ed Srews Qty: 8 Box E Swith

More information

1. Find the zeros Find roots. Set function = 0, factor or use quadratic equation if quadratic, graph to find zeros on calculator

1. Find the zeros Find roots. Set function = 0, factor or use quadratic equation if quadratic, graph to find zeros on calculator AP Clculus Finl Review Sheet When you see the words. This is wht you think of doing. Find the zeros Find roots. Set function =, fctor or use qudrtic eqution if qudrtic, grph to find zeros on clcultor.

More information

Net Change and Displacement

Net Change and Displacement mth 11, pplictions motion: velocity nd net chnge 1 Net Chnge nd Displcement We hve seen tht the definite integrl f (x) dx mesures the net re under the curve y f (x) on the intervl [, b] Any prt of the

More information

Multi-level Visualization of Concurrent and Distributed Computation in Erlang

Multi-level Visualization of Concurrent and Distributed Computation in Erlang Multi-level Visuliztion of Conurrent nd Distriuted Computtion in Erlng Roert Bker r440@kent..uk Peter Rodgers P.J.Rodgers@kent..uk Simon Thompson S.J.Thompson@kent..uk Huiqing Li H.Li@kent..uk Astrt This

More information

Tourism New Zealand Offshore Events Terms and Conditions (Valid for participation in events held from 1 January 2012)

Tourism New Zealand Offshore Events Terms and Conditions (Valid for participation in events held from 1 January 2012) Tourism New Zelnd Offshore Events Terms nd Conditions (Vlid for prtiiption in events held from 1 Jnury 2012) By sumitting n pplition for registrtion to prtiipte in Tourism New Zelnd event you gree tht

More information

Abbott RealTime 2N40 HBV 51-608234/R1. Customer Service: 1-800-553-7042. Key to symbols used

Abbott RealTime 2N40 HBV 51-608234/R1. Customer Service: 1-800-553-7042. Key to symbols used Aott RelTime 2N40 51-608234/R1 HBV Customer Servie: 1-800-553-7042 This pkge insert must e red refully prior to use. Pkge insert instrutions must e followed ordingly. Reliility of ssy results nnot e gurnteed

More information