GVMB SERIES BEAMS (Inc. SP version)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "GVMB SERIES BEAMS (Inc. SP version)"

Transcription

1 GVMB SERIES BEAMS (Inc. SP version) ACTIVE INFRA RED BEAM Range: 30, 60, 100, 150, 200 external 45, 90, 130, 180, 250 internal INSTALLATION INSTRUCTIONS

2 GEOQUIP LIMITED Kingsfield Industrial Estate, Derby Road Wirksworth, Matlock, Derbyshire, DE4 4BG Tel: Fax: Website: Document Number:... Revision Number:... Date of Issue:...June

3 TO EASE YOUR PATH TO SYSTEM CONFORMITY WITH THE DIRECTIVE WE RECOMMEND THE 12Vd.c. SUPPLY SHOULD HAVE A FLOATING OUTPUT TO ACCEPT THE NEGATIVE EARTH ALL CABLING SHOULD BE SCREENED ---- All illustrations and sizes shown in this manual are intended as a guide only and do not form any part of any contract between Geoquip Limited and its customers. All specifications and designs shown in this manual are subject to alteration by Geoquip Limited without notice at anytime. 3

4 CONTENTS 1. KEY FEATURES GENERAL DESCRIPTION INSTALLATION WIRING CONNECTIONS BEAM ALIGNMENT TESTS

5 1. KEY FEATURES Ranges obtainable with only 10% of beam energy utilised (90% attenuation) 'Synchronous' O/P ensures no interference between beam sets Proportional alignment output voltage - no special test equipment needed High immunity to sunlight, headlights, and artificial lighting Adjustable optical modules 180 deg. horizontal - 40 deg. vertical (no mirrors or reflectors) Integral electronic 90% test filter Integral heaters Visually opaque covers hide beam direction Post / wall mount brackets included Weatherproof housing to IP54 Stackable for multi barrier applications 'SP' version includes system performance monitor (Fog discrimination) Dual selectable voltage : 12Vdc / 24Vdc 2. GENERAL DESCRIPTION The GVMB series IR beams are interruption devices featuring a dual optical system which provides two separate beam paths, adjustable over 180 deg. horizontal and 40 deg. vertical, using a single pair of housings. One housing contains the transmitting equipment, the other the receiving equipment. It is not necessary to interconnect the units, and if required they may be powered from separate power sources. Interconnection is only required when using the 'Synchronisation' facility. The housings are designed for indoor or outdoor use. The object of the dual beam system is to minimise false alarms that could be generated by single beam interruption due, for instance, to birds flying through the beam system. One relay output is provided, with one set of c/o contacts to signal an alarm situation when both beams are simultaneously interrupted. 1 - The GVMB- series Receiver (RX) unit complete with two photo electric detector adjustable optical assemblies, one relay output with a set of c/o contacts for dual beam blockage, tamper O/P, and complete with cover-filter heater in a weather resistant housing with fittings for wall or pole mounting. (Max. contact rating 24V 1A d.c.) 1 - The GVMB- series Transmitter (TX) unit having two IR emitter adjustable assemblies, complete with cover filter heater in a weather resistant housing with fittings for wall or pole mounting. 5

6 BEAM SET CONFIGURATION OPTIONS THE RECEIVER & PROJECTORS MAY BE POWERED FROM A COMMON OR SEPARATE POWER SUPPLY, AS CONVENIENT. FIG. 1a Transposed beam sets : Synchronous Link not required (max. two sets) WHEN USING SYNCHRONOUS LINK FACILITY FOR MULTI BEAM STACKING, IT IS ESSENTIAL THAT EITHER THE TRANSMITTER AND THE RECEIVER UNITS ARE POWERED BY THE SAME LOW VOLTAGE SUPPLY OR, ALTERNATIVELY, THE (-ve) NEGATIVE RAILS OF THE SEPARATE SUPPLIES ARE CONNECTED TOGETHER FIG. 1b Multiple beams : When using Synchronisation Link up to eight sets of beams may be stacked 6

7 3. INSTALLATION The units should be installed at a distance from each other not greater than the range specified for the model. If the ground slopes between the units at a greater angle than 20 deg. it will not be possible to align the optics if the mountings are upright, and for such situations it would be necessary to set the mounting surfaces at a suitable angle. Using the mounting kits provided the equipment may be fitted to nominally 50mm poles (typical of scaffold pole) or wall mounted - see Fig. 4a and 4b. A template is provided for wall mounting. FIG. 5 To avoid rain water entry and to correctly position the heaters, the units should be mounted with the cable gland downwards. FIG. 3 The mounting surfaces to which the equipment is fitted must be firm and vibration free. Note that the optical assemblies are adjustable over wide angles (180 deg. horizontal and ± 20 deg. vertical); the mounting positions should be arranged accordingly. If the heater is being used, position it immediately below and centred on the lower lens. Replace filter covers. FIG. 3. Important Note: an additional heater element is required for both the TX & RX unit, if they are to be powered via a 24Vdc supply. Although fitted with rejection circuits, it is good practice to mount the Receiver unit in a position that will minimise the effect of daylight or artificial light falling directly on the optical axis. This is particularly important when the equipment is installed on sloping ground, where it is prudent for the Receiver optics to point towards the ground rather than the sky. Two sets of the GVMB- series dual beams may be stacked to provide a 4 beam system without the need to synchronise each set. When used in this arrangement the sets must be transposed. FIG.1a Alternatively, by using the 'Synchronisation' link, up to eight sets of beams can be stacked without the need to transpose. (Also ideal for large perimeters with 'dog leg' zones). FIG 1b 4. WIRING CONNECTIONS Note units are 'HANDED': If it is desired to install either TX or RX on a wall in a corner adjacent to a 90 deg. wall, access to the terminal connections may be prohibited. If this is the case, then the TX & RX PCB boards can be unscrewed from their mounts and rotated through 180 deg. then rescrewed in position, thus allowing access to the terminal connections. EMC Directive 89/336/EEC: To ease your path to system conformity with the directive, we recommend that all cabling be screened. The alarm O/P terminals are shown in a de-energised state, i.e. when the system is in alarm condition (beams blocked). For 'Synchronisation' refer to FIG. 1b. For full terminal connections refer to FIG. 2 7

8 Approx. Current Requirements Transmitter 20mA Receiver Normal 50mA Principal Alarm 20mA Heater (one per unit) (not required for indoor use) 125mA TERMINATION CONNECTIONS TRANSMITTER Note: For ease of alignment: The black link adjacent to Term. 10 on the Transmitter Unit (As supplied in park position) can be used to cut off the IR transmission from the lower and upper Transmitter (TX) optics when alignment is carried out. With the link inserted in position LKB, the upper optical Transmitter is turned off. With the link in position LKC, the lower optical Transmitter is turned off. Remember to replace the link back into its park position once the alignment is complete. The units are handed so if the Transmitter PCB has been rotated for ease of access to the terminals, then it must be appreciated that LKB will then be associated with the lower TX and LKC with the upper TX. RECEIVER 0 V TP2 ALIGN FIG. 2 8

9 5. BEAM ALIGNMENT Once the units are installed and powered they should be carefully aligned for maximum performance. Caution: Whilst the covers are removed make sure that the sun light does not shine directly on to the lenses. This is to avoid burning the lens housing interiors. To align the units correctly a 0-10V range meter is required. Where units prove difficult to align, use the RV sight optical module Pt No. GVSAA1-16 available on request. If a number of units are to be aligned on a site then it may be prudent to invest in the RV mini strobe light ( 55.00). Note that there is an LED on the Receiver PCB which will illuminate when the alarm relay goes to an alarm state. (The alarm relay is normally energised, de-energised to alarm). Connect the voltmeter to either terminals pin 1 (-ve) and 5 (+ve) or if equipped with suitable clips, to the PCB pin marked 'ALIGN' TP2 (+ve) and the PCB Pin marked 0V (adjacent T1.) (-ve). See Fig. 2 Cover the lenses of the lower TX and RX and adjust the upper TX and RX lens assemblies for maximum voltage reading. Uncover the lower lenses and cover the top lenses, adjust the lower TX and RX lens assemblies for maximum voltage reading. Precise voltages will depend on the range at which the equipment is used, but at 150M without Synchronisation, a voltage of approx. 5-6 V d.c. should be obtained. If the voltage is considerably lower than this, alignment is not correct and the procedure should be repeated. If the beams are synchronised, then a voltage of approx. 3-4 V d.c. should be obtained A final alignment check can be obtained by the use of the integral electronic 90% attenuation filter. Depress and hold the electronic attenuation filter button for a few seconds (Receiver unit), if the beams are in true alignment the alarm LED will remain off. If this test causes an Alarm, either the max. range has been exceeded or the equipment is not aligned for optimum performance and the alignment process should be repeated. 6. TESTS Once alignment is complete the following tests should be carried out: 1. Break / block both beams simultaneously at the RX end. The alarm relay and LED should operate immediately. 2. Repeat the above at the TX end, and again at mid point through the detection zone. 9

10 SIDE VIEW FIG. 3 FRONT VIEW TAMPER SWITCH HEATER CABLE ENTRY GLAND 10

11 FIG. 4a FIG. 4b 11

12 FIG. 5 WALL MOUNT TEMPLATE (ACTUAL SIZE) BY USE OF THE TEMPLATE, THE FIXING SCREWS CAN BE INSERTED INTO THE WALL PRIOR TO FINALLY SECURING THE BACKPLATE IN POSITION. 12

Photoelectric Beam Sensor ACTIVE INFRARED SENSOR. Instruction Manual

Photoelectric Beam Sensor ACTIVE INFRARED SENSOR. Instruction Manual Photoelectric Beam Sensor ACTIVE INFRARED SENSOR Instruction Manual ABT-30 (Outdoor 30m., Indoor 90m.) ABT-60 (Outdoor 60m., Indoor 180m.) ABT-80 (Outdoor 80m., Indoor 240m.) ABT-100 (Outdoor 100m., Indoor

More information

FIRERAY 2000 Installation Guide

FIRERAY 2000 Installation Guide FIRERAY 2000 Installation Guide Features Range 33ft to 330 ft. 24Vdc operation Selectable alarm thresholds Low current consumption Ground level electronics Manual or Automatic reset System Description

More information

For use with all GTO Access Systems and Mighty Mule AC and DC powered gate operators. INTERNAL VIEW OF RECEIVER. Wiring Hole. Connection Terminals

For use with all GTO Access Systems and Mighty Mule AC and DC powered gate operators. INTERNAL VIEW OF RECEIVER. Wiring Hole. Connection Terminals PHOTOELECTRIC DUAL BEAM DETECTOR Owners Manual R4222 The GTO Access Systems Photoelectric Dual Beam Detector uses dual beam and through-beam technology to reduce false detections when detecting obstructions.

More information

PASSIVE INFRARED INTRUSION DETECTOR PASSIVE INFRAROOD DETECTOR DETECTEUR D INTRUSION PASSIF INFRAROUGE

PASSIVE INFRARED INTRUSION DETECTOR PASSIVE INFRAROOD DETECTOR DETECTEUR D INTRUSION PASSIF INFRAROUGE MODEL HAA51 PASSIVE INFRARED INTRUSION DETECTOR PASSIVE INFRAROOD DETECTOR DETECTEUR D INTRUSION PASSIF INFRAROUGE OPERATING MANUAL HAA51 PASSIVE INFRARED INTRUDER DETECTOR INTRODUCTION HAA51 Passive Infrared

More information

PASSIVE INFRARED DETECTOR P A ( P E T )

PASSIVE INFRARED DETECTOR P A ( P E T ) D E T E C T O R PASSIVE INFRARED DETECTOR P A - 4 0 1 2 ( P E T ) Passive Infrared Detector for Security Professionals Wo r l d w i d e AUTO SENSITIVITY INHIBITION CONTROL In temperature environment where

More information

Photoelectric Beam Detector

Photoelectric Beam Detector EL-PB60S Features EL-PB60S Photoelectric Beam Detector ( 60M ) - Wide angle adjustment - External light protection - Protection against frost/dew, Guaranteed quality of front cover - High convenience for

More information

INTRODUCTION. The T4 system is a Category 4 control solution which incorporates safety PLC functionality and a data link facility.

INTRODUCTION. The T4 system is a Category 4 control solution which incorporates safety PLC functionality and a data link facility. INTRODUCTION The T4 system is a Category 4 control solution which incorporates safety PLC functionality and a data link facility. The T4 Series meets the very highest standards for safety Third Party Approved

More information

Curtain / Barrier Sensors

Curtain / Barrier Sensors Dimensions: 22.56 (57.3cm) --E-9622C2B25Q Side View 1 1 /8 (29mm) 1 3 /8 (35mm) 15 /16 (24mm) 1 3 /16 (30mm) Curtain / Barrier Sensors Manual Also available from SECO-LAM: Quad and Twin Photobeam Detectors

More information

AX-100TFR/AX-200 TFR INSTALLATION INSTRUCTIONS INTRODUCTION 1-1 BEFORE YOUR OPERATION BATTERY OPERATED PHOTOELECTRIC DETECTOR.

AX-100TFR/AX-200 TFR INSTALLATION INSTRUCTIONS INTRODUCTION 1-1 BEFORE YOUR OPERATION BATTERY OPERATED PHOTOELECTRIC DETECTOR. FEATURES 4 5 6 No.59-55- 09040 INSTALLATION INSTRUCTIONS N9 BATTERY OPERATED PHOTOELECTRIC DETECTOR AX-00TFR/AX-00 TFR : Detection range: 0 m (00 ft.) : Detection range: 60 m (00 ft.) Battery-operated

More information

user guide issue

user guide issue user guide issue 0025-05 distance & positioning guidelines these guidelines are given as a guide only and it is important that you refer to your appropriate governing standards at all times. what distance?

More information

DOOR MOUNTED SAFETY SENSOR USER S GUIDE

DOOR MOUNTED SAFETY SENSOR USER S GUIDE 8310-804 DOOR MOUNTED SAFETY SENSOR USER S GUIDE DESCRIPTION The Door Mounted Safety Sensor (DMSS) (8310-804) detector is a door-mounted presence detection system that is used on automatic pedestrian swing

More information

DSL-340 MkIII Double Pass Dust Monitor Measures 0-1000mg/m 3 using DDP

DSL-340 MkIII Double Pass Dust Monitor Measures 0-1000mg/m 3 using DDP Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions

More information

WORLDWIDE. GW400k SERIES MAINTENANCE MANUAL PROVEN PERIMETER PROTECTION

WORLDWIDE. GW400k SERIES MAINTENANCE MANUAL PROVEN PERIMETER PROTECTION ORLDIDE G400k SERIES MAINTENANCE MANUAL PROVEN PERIMETER PROTECTION GEOQUIP LIMITED Kingsfield Industrial Estate, Derby Road irksworth, Matlock, Derbyshire, DE4 4BG Tel : 01629 824891 Fax : 01629 824896

More information

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.

More information

Passive Infrared Motion Detector 5420/90. Installation Instructions

Passive Infrared Motion Detector 5420/90. Installation Instructions Passive Infrared Motion Detector Installation Instructions 5420/90 The 5420/90 Passive Infrared Motion Detector provides reliable, high performance detection at an affordable price. The Detector features

More information

... XWAVE... WIRELESS... DETECTORS...

... XWAVE... WIRELESS... DETECTORS... .............. XWAVE... WIRELESS..... DETECTORS.... Optex Xwave Wireless VXI Outdoor Wide Angle Dual PIR Outdoor 1 x 1m wireless detector 5 Levels of detection length adjustment Advanced temperature compensation

More information

1 FOR PROPER INSTALLATION

1 FOR PROPER INSTALLATION BEAM DEECORS NR30D (Outdoor 30m/ Indoor 60m) NR60D (Outdoor 60m/ Indoor 0m) NR90D (Outdoor 90m/ Indoor 80m) INSALLAION INSRUCIONS We appreciate your purchase of ASUMI INRUDER ALARM SYSEM BEAM DEECOR. Please

More information

Power Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN

Power Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN Power Supply and Indicator Unit Type 5024-1 Fig. 1 Type 5024-1 Mounting and Operating Instructions EB 9539 EN Edition October 2003 Application 1 Application The Type 5024-1 Power Supply and Indicator Unit

More information

Displaying temperatures from 3 sensors for a distance of up to 1,200 metres 7-Segment LED display

Displaying temperatures from 3 sensors for a distance of up to 1,200 metres 7-Segment LED display Industrial thermometer Displaying temperatures from 3 sensors for a distance of up to 1,200 metres 7-Segment LED display 24. April 2014 w w w. p a p o u c h. c o m 0388.02.01 Datasheet Created: 2/27/2008

More information

Wireless Home Security Alarm System AM 500

Wireless Home Security Alarm System AM 500 Wireless Home Security Alarm System AM 500 12 MONTH GUARANTEE Installation & Operating Instructions INTRODUCTION The AM500 is a simple self-contained alarm system. It protects the home by sounding a siren

More information

5800PIR-OD Wireless Outdoor Motion Sensor Installation Instructions

5800PIR-OD Wireless Outdoor Motion Sensor Installation Instructions 5800PIR-OD Wireless Outdoor Motion Sensor Installation Instructions GENERAL INFORMATION The Honeywell 5800PIR-OD Wireless Outdoor Motion Sensor (referred to as the 5800PIR-OD) combines the convenience

More information

Triple Waveband Infra-Red Flame Detection

Triple Waveband Infra-Red Flame Detection Minerva S200PLUS Ex ia Intrinsically Safe & Ex d Flameproof Solar Blind Flame Detectors Triple Waveband Infra-Red Flame Detection Key Features Unrivalled black body rejection over a wide range of source

More information

Short Range Wireless Switch System Handheld 8 Installation and Operations Guide

Short Range Wireless Switch System Handheld 8 Installation and Operations Guide Phone: (866) 701-1146 Fax: (425) 216-7558 www.remotecontroltech.com Short Range Wireless Switch System Handheld 8 Installation and Operations Guide Introduction... 2 Before Installation... 2 Receiver Installation...

More information

SB Series AIR Beam Detectors Installation Manual

SB Series AIR Beam Detectors Installation Manual SB Series AIR Beam Detectors Installation Manual EN SB Series AIR Beam Detectors Installation Manual DE Für eine deutsche Anleitung siehe www.utcfssecurityproducts.eu/manuals/nt299-ml_reva_sb_series.pdf

More information

Humidity sensor. » eq DATASHEETS. use. type summery. Operating voltage AC 24 V/DC V Signal output DC 0...

Humidity sensor. » eq DATASHEETS. use. type summery. Operating voltage AC 24 V/DC V Signal output DC 0... Air Comfort Air treatment 9583 GB 2014.09.26 sensor for relative humidity and temperature STBZ-02» eq DATASHEETS Operating voltage AC 24 V/DC 13.5...35 V Signal output DC 0...10 V/4 20 ma for relative

More information

KNX L. Brightness Sensor. Technical specifications and installation instructions Item number 70119

KNX L. Brightness Sensor. Technical specifications and installation instructions Item number 70119 EN KNX L Brightness Sensor Technical specifications and installation instructions Item number 70119 Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D 75391 Gechingen Phone +49 (0) 70

More information

PHOTOELECTRIC BEAM SENSOR

PHOTOELECTRIC BEAM SENSOR SECURITY PHOTOELECTRIC BEAM SENSOR The award of the Director General of Japanese Technological Agency PXB- 50HF PXB-100HF PXB-200HF OUTDOOR 165ft ( 50m) OUTDOOR 330ft (100m) OUTDOOR 660ft (200m)

More information

R180 WIRELESS WIND SPEED INDICATOR

R180 WIRELESS WIND SPEED INDICATOR 55M0180GSE00 Rev. A R180 WIRELESS WIND SPEED INDICATOR Installation and Operation Manual Ref: VH feb. 2012 Wylie Systems (Rayco Technology Group) 1020 9th Avenue SW Suite 124 Bessemer, AL USA 35022 Rayco

More information

Photon Infrared Beams Pocket Installation Guide SAFETY BEAMS FOR AUTOMATED GATES

Photon Infrared Beams Pocket Installation Guide SAFETY BEAMS FOR AUTOMATED GATES Photon Infrared Beams Pocket Installation Guide SAFETY BEAMS FOR AUTOMATED GATES 1. Introduction Photon infrared gate safety beams have been designed to provide an integral element of safety to an automated

More information

Infra Red Remote Control Extender

Infra Red Remote Control Extender Infra Red Remote Control Extender Description This circuit is used to relay signals from an Infra Red remote control in one room to an IR controlled appliance in another room. Forward I have seen these

More information

AFP-2800 Distributed Field Modules AZM-8 & FAN-C. Installation Manual. 25/01/2008 Rev: 2.03

AFP-2800 Distributed Field Modules AZM-8 & FAN-C. Installation Manual. 25/01/2008 Rev: 2.03 AFP800 Distributed Field Modules AZM8 & FANC Installation Manual 5/0/008 Rev:.0 ECN 08005 DOC0000 Table of Contents. General...4. FAN CONTROL (IFS70)...4.. Product overview:...4.. Specifications...5..

More information

2.4GHz Digital Wireless Rearview Camera with 7 Color LCD Monitor

2.4GHz Digital Wireless Rearview Camera with 7 Color LCD Monitor USER MANUAL Model: VTC700R 2.4GHz Digital Wireless Rearview Camera with 7 Color LCD Monitor Packing List Rearview Camera TFT-LCD Monitor Video Cable Antenna for Camera and Monitor Suction Holder Stamping

More information

BARDIC. 4 & 8 Zone Fire Panels Zircon range. Data, installation, operation and maintenance. by Honeywell

BARDIC. 4 & 8 Zone Fire Panels Zircon range. Data, installation, operation and maintenance. by Honeywell Data, installation, operation and maintenance 4 & 8 Zone Fire Panels Zircon range BARDIC by Honeywell LED flashing LED Continuous FAULT DISABLE/TEST Power General Fault Sounder Fault/ Disable System Fault

More information

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT

More information

FSLIMRF05-10 - 15-20 - 25

FSLIMRF05-10 - 15-20 - 25 1. INTRODUCTION FSLIMRF is a fully wireless, battery-powered infrared beam barrier for the protection of doors and windows with alarm radio transmission. The barrier is made up of two aluminium sections

More information

Installation of flow meter control FOM 71 LAB

Installation of flow meter control FOM 71 LAB Installation of flow meter control FOM 71 LAB 438 9041-07/04 May only be carried out by authorized personnel. Flow meter control 1 Flow meter control Fig 1 Fig 2 Fig 2 Fig 3 This flow meter kit is specially

More information

2 General Application Photoelectric Sensors

2 General Application Photoelectric Sensors EZ-EYE General Purpose Photoelectric Sensor 2 General Application Photoelectric Sensors 2-37 General Application Photoelectric Sensors 2 EZ-EYE EZ-EYE miniature photoelectric sensors fulfill the need for

More information

Omega.com TM. RELAY-URM SERIES Universal Relay Module

Omega.com TM.    RELAY-URM SERIES Universal Relay Module Omega.com TM http://www.omega.com e-mail: info@omega.com RELAY-URM SERIES Universal Relay Module SPECIFICATIONS... 2 DESCRIPTION... 3 POWER CONNECTION... 3 INPUT CONNECTIONS Relays 1-4... 4 Figure 2:

More information

Braincube Aeromodels. BrainCube. FlightLights. Version 5 Owners Manual

Braincube Aeromodels. BrainCube. FlightLights. Version 5 Owners Manual Braincube Aeromodels BrainCube FlightLights Version 5 Owners Manual Introduction Thank you for purchasing a set of FlightLights, a high performance LED system for model aircraft designed and manufactured

More information

PROXIMITY CARD READERS C-10, C-20, C60, C70

PROXIMITY CARD READERS C-10, C-20, C60, C70 Installation Manual PROXIMITY CARD READERS C-10, C-20, C60, C70 VERSION 1.0 CONTENTS 1. General information................................. 3 2. Technical data......................... 4 3. Connection

More information

Gas Safety Products. Installation, operating and maintenance 28/10/2015. Merlin Gas Detectors. Merlin Gas Detectors. S&S Northern Ltd 1

Gas Safety Products. Installation, operating and maintenance 28/10/2015. Merlin Gas Detectors. Merlin Gas Detectors. S&S Northern Ltd 1 Gas Safety Products Merlin Gas Detectors Installation, operating and maintenance 28/10/2015 S&S Northern Ltd 1 Table of contents 1 General information... 3 2 Installation... 3 2.1 Mounting the Merlin gas

More information

This icon denotes a situation involving the risk of serious injury or even death, if the warning given is ignored.

This icon denotes a situation involving the risk of serious injury or even death, if the warning given is ignored. MULTI STABILIZED OUTDOOR DETECTOR VX-402R BATTERY OPERATED Low Current Draw Battery Saving Circuit Operates on Wide Range of Power Back box for a wireless transmitter Limited Detection Range Function Size

More information

Installation & User Manual Radio Remote RC-12E

Installation & User Manual Radio Remote RC-12E Installation & User Manual Radio Remote RC-12E SLEIPNER MOTOR AS P.O. Box 519 N-1612 Fredrikstad Norway Tel: +47 69 30 00 60 Fax: +47 69 30 00 70 www.side-power.com sidepower@sleipner.no Made in Norway

More information

[SMD] [Serie100] [48bit] [SPV] [AN] INSTALLATION AND USE MANUAL M:3.1-H:MW3.1-F:x.x HOW TO USE CORRECTLY THE DUAL TECHNOLOGY SERIE SENSORS

[SMD] [Serie100] [48bit] [SPV] [AN] INSTALLATION AND USE MANUAL M:3.1-H:MW3.1-F:x.x HOW TO USE CORRECTLY THE DUAL TECHNOLOGY SERIE SENSORS DIRRVE-DT / DIRFE-DT OUTDOOR DUAL TECHNOLOGY SENSOR [SMD] [Serie100] [48bit] [SPV] [AN] INSTALLATION AND USE MANUAL 15.11-M:3.1-H:MW3.1-F:x.x HOW TO USE CORRECTLY THE DUAL TECHNOLOGY SERIE SENSORS This

More information

The Premier Fence Mounted Perimeter Intruder Detection System

The Premier Fence Mounted Perimeter Intruder Detection System Microphonic Audio Verification System as Standard Dual Channel Processing which contributes to Low Nuisance Alarms Patented Alpha Sensor Technology Unique Performance Pledge Guarantee The Premier Fence

More information

PHILIPS Broadband Fiber Optic System

PHILIPS Broadband Fiber Optic System PHILIPS Broadband Fiber Optic System FOP 0435/011 FOP 0435/011 FOP 0435/011 FOP 0435/011 FOP 0510/011 15V DC LINE 230V~ 40W FUSE T 2A H / 250V Return Path RX Return Path RX Return Path RX Return Path RX

More information

EE-SPW411. Through-beam Photomicrosensor with a sensing distance as long as 1 m. Long-distance Through-beam Photomicrosensor. Ordering Information

EE-SPW411. Through-beam Photomicrosensor with a sensing distance as long as 1 m. Long-distance Through-beam Photomicrosensor. Ordering Information Long-distance Through-beam Photomicrosensor /411 CSM 411_DS_E_6_1 Through-beam Photomicrosensor with a sensing distance as long as 1 m. Easy operation monitoring with bright light indicator. Wide operating

More information

INSTALLATION AND MAINTENANCE INSTRUCTIONS 6500 AND 6500S REFLECTED TYPE PROJECTED BEAM SMOKE DETECTOR

INSTALLATION AND MAINTENANCE INSTRUCTIONS 6500 AND 6500S REFLECTED TYPE PROJECTED BEAM SMOKE DETECTOR INSTALLATION AND MAINTENANCE INSTRUCTIONS 6500 AND 6500S REFLECTED TYPE PROJECTED BEAM SMOKE DETECTOR GENERAL The model 6500 is an addressable long range projected beam smoke detector designed to provide

More information

5W LED Energy Saver PIR Bulkhead

5W LED Energy Saver PIR Bulkhead 5W LED Energy Saver PIR Bulkhead Model: LED88PIR Black I n s t a l l a t i o n & Ope r a t i n g I n s t r u c t i o n s 1. General information: The unit utilises passive infrared technology to detect

More information

HORNET Remote Control Systems

HORNET Remote Control Systems HORNET Remote Control Systems Up to 100metres Range 1 3 Button versions 12-30Vdc 0r 230Vac versions Reliable FM Technology Up to four 1000W Relay switches Waterproof Receiver (IP68) Momentary or Latching

More information

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual 0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security

More information

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in 891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC

More information

BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR

BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR TXF-125E : OUTDOOR 330ft (100m) Instruction Manual Thank you for purchasing this product. Before using the product, please read this instruction manual to ensure

More information

MULTI-BEAM LS10 Light Screen System

MULTI-BEAM LS10 Light Screen System For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small

More information

Important: Read Before Commissioning

Important: Read Before Commissioning Safty Instructions Important: Read Before Commissioning The user must ensure that all operators are familiar with this operating manual and follow it at all times. The operating manual must be read carefully

More information

SPR-5200 and SPR-4600 Installation and Operation Manual

SPR-5200 and SPR-4600 Installation and Operation Manual SPR-5200 and SPR-4600 Installation and Operation Manual SunPower Corporation Document # 001 69178 Rev** 1 SunPower Inverter SPR-5200 and SPR-4600 Table of Contents SunPower Corporation Document # 001 69178

More information

TS510 & TS500. Installation & User Guide. Compatible Equipment

TS510 & TS500. Installation & User Guide. Compatible Equipment Installation & User Guide Compatible Equipment TS510 REM - Remote Keypad 9040 - Loudspeaker DC54/58 - Digital Communicator SD1+ - Speech Dialler 496525 Issue A 1 of 10 TS510 and TS500 Overview Introduction

More information

OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS

OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric

More information

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels Installation and user manual for the FX range of fire panels 1, 2, 4 and 8 zone panels Contents Panel installation 3 Panel connections 3 Wiring connection drawings 4 Panel facilities 6 Installation check

More information

Salamander Installer Guide

Salamander Installer Guide S A L A M A N D E R I N S T A L L E R G U I D E Salamander Installer Guide Introduction Salamander is a radio-controlled, battery-powered system for holding open fire doors. It combines ease and speed

More information

IQ151 CONTROLLER DATA SHEET

IQ151 CONTROLLER DATA SHEET IQ151 CONTROLLER DATA SHEET The IQ151 is a controller in the Trend range with 64 inputs and 32 outputs. Full DDC (direct digital control) with PID control loops is provided. The output channels may be

More information

FM Remote-Control Receiver 2.4G with IR terminal

FM Remote-Control Receiver 2.4G with IR terminal Electric wave Remote-control Switch FM Remote-Control Receiver 2.4G with IR terminal No.N 10093003 Instruction Manual Thank you for purchasing TOSO products. To ensure safe use of this product, please

More information

siemens.com/mobility Radar detectors of the Heimdall family High detection rate, easy installation

siemens.com/mobility Radar detectors of the Heimdall family High detection rate, easy installation siemens.com/mobility Radar detectors of the Heimdall family High detection rate, easy installation Heimdall radar detectors from Siemens: A family that provides valuable benefits, Heimdall is the watchman

More information

IPX AUTOMATIC IP NETWORK LOSS BACKUP A/B SWITCH INSTRUCTION BOOK IB6444-02

IPX AUTOMATIC IP NETWORK LOSS BACKUP A/B SWITCH INSTRUCTION BOOK IB6444-02 IPX AUTOMATIC IP NETWORK LOSS BACKUP A/B SWITCH INSTRUCTION BOOK IB6444-02 TABLE OF CONTENTS DESCRIPTION 2 MOUNTING INSTRUCTIONS 2 HOW TO CABLE THE IPX 2/3 POWER SUPPLY INSTALLATION 3 OPERATION 3 CARE

More information

ADI Modules - Integrated Domestic Automation Weather and control units

ADI Modules - Integrated Domestic Automation Weather and control units ADI Modules - Integrated Domestic Automation Weather and control units ADI MODULES Radio controlled equipment for automating doors and windows, rolling shutters, lights, fans, solenoids and small domestic

More information

System Guide to Active Beam design Active Beam Tower design updated July 2013

System Guide to Active Beam design Active Beam Tower design updated July 2013 System Guide to Active Beam design Active Beam Tower design updated July 2013 Solar, Battery or wired power, Wireless or hardwired signalling, Tower or Stand-alone mounting Written by Paul Nicholas, Divisional

More information

p wered BLINDS control at your fingertips Installation, Programming & Operation Guide Battery Powered Roller Blind

p wered BLINDS control at your fingertips Installation, Programming & Operation Guide Battery Powered Roller Blind p wered BLINDS control at your fingertips Installation, Programming & Operation Guide Battery Powered Roller Blind www.poweredblinds.co.uk Contents The contents of your order... Page 3 Blind fitting &

More information

Deep Sea Electronics Plc

Deep Sea Electronics Plc Deep Sea Electronics Plc MODEL 521 REMOTE START ENGINE MANAGEMENT SYSTEM Author:- Miles Revell Deep Sea Electronics Plc Highfield House Hunmanby North Yorkshire YO14 OPH England Tel: +44 (0) 1723 890099

More information

Unpacking. Fitting the camera inside the housing. 290B Outdoor housing. In the box with the 290B housing you will find a small plastic bag containing:

Unpacking. Fitting the camera inside the housing. 290B Outdoor housing. In the box with the 290B housing you will find a small plastic bag containing: Unpacking In the box with the 290B housing you will find a small plastic bag containing: 1 2 4 5 3 No. 1. One large allen key 2. One small allen key 3. Two locking screws 4. Four M8 wall fixings 5. Four

More information

ELITE-KIT. Professional Remote Control Kit. Applications Garden Lighting Pond pumps Remote outdoor Switching Access control Industrial control

ELITE-KIT. Professional Remote Control Kit. Applications Garden Lighting Pond pumps Remote outdoor Switching Access control Industrial control ELITE-KIT Professional Remote Control Kit Applications Garden Lighting Pond pumps Remote outdoor Switching Access control Industrial control Features 4 switched channels rated at 2KW 4KW maximum load Systems

More information

SMARTEYE Sender/Receiver Reader

SMARTEYE Sender/Receiver Reader SMARTEYE Sender/Receiver Reader User Manual Revision 5 www.smarteyecorporation.com related documents: SMARTEYE Electronics Assembly User Manual SMARTEYE S-net with DeviceNet User Manual SMARTEYE Twin

More information

SDV1092-8 Music Mixer / Equaliser Installation guide and user manual

SDV1092-8 Music Mixer / Equaliser Installation guide and user manual EIGHT CHANNEL MIXER/EQUALISER SDV1092-8 Music Mixer / Equaliser Installation guide and user manual 1 CONTENTS CONTENTS...2 SAFETY NOTES...3 INTRODUCTION...4 USER CONTROLS...7 VOLUME CONTROL...7 MUSIC SOURCE

More information

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual 5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...

More information

Advanced Intelligent Modules. Overview. Description

Advanced Intelligent Modules. Overview. Description Overview Features M200XE Short Circuit Isolator Module M201E Single Output Module M210E Single Input Module M210E CZ Conventional Zone Module M220E Dual Input Module M221E Dual Input Single Output Module

More information

Figure 1: Typical Setups. RS-232 RS-422 or RS-485 Device or System TX FOSTC. RS-232 RS-422 or RS-485 Device or System FOSTC

Figure 1: Typical Setups. RS-232 RS-422 or RS-485 Device or System TX FOSTC. RS-232 RS-422 or RS-485 Device or System FOSTC SW1: = ON SW1: = ON SW1: = ON -01-1/ 00 by B&B Electronics. All rights reserved. Model RS-, or Signals Up To. Miles with Fiber Optic Modem Description Fiber optic cabling has inherent resistance to EMI/RFI

More information

ALARMLINE ANALOGUE Linear Heat Detection System

ALARMLINE ANALOGUE Linear Heat Detection System ALARMLINE ANALOGUE Alarmline Analogue sensor cable senses temperature variations by continuously monitoring the resistance of specially doped N.T.C. polymeric insulation. A change in temperature produces

More information

60W PIR BULKHEAD LIGHT SLB88-Black/SLW89-White INSTALLATION & OPERATING INSTRUCTIONS

60W PIR BULKHEAD LIGHT SLB88-Black/SLW89-White INSTALLATION & OPERATING INSTRUCTIONS 60W PIR BULKHEAD LIGHT SLB88-Black/SLW89-White INSTALLATION & OPERATING INSTRUCTIONS SLB88 PIR BULKHEAD LIGHT - BLACK WEATHERPROOF LAMP TYPE IP44 60w ES MAXIMUM PIR SWITCHING 500w MAXIMUM TIME ON DETECTION

More information

Tilt switches N3 / N4... MEMS technology, one or two axis. Use. Options. + long lifetime and highly reliability due to mechanism-free MEMS technology

Tilt switches N3 / N4... MEMS technology, one or two axis. Use. Options. + long lifetime and highly reliability due to mechanism-free MEMS technology Tilt switches MEMS technology, one or two axis N3 / N4... + long lifetime and highly reliability due to mechanism-free MEMS technology + combinable output signals + one or two axis measurement + tilt range

More information

Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.

Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector. Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly

More information

Operating instructions I / DALI EASY II Version 1.0. General. Contents. General

Operating instructions I / DALI EASY II Version 1.0. General. Contents. General Operating instructions I / 2007 General Contents General Installation Appendix Safety information 2 Definition of terms 3 Application and function 4 Components 5 Wiring diagrams 6 Wiring diagrams 7 System

More information

MIC-WKT and MIC-WKT-IR

MIC-WKT and MIC-WKT-IR MIC-WKT and MIC-WKT-IR Installation Manual Bosch Security Systems EN Installation and Operation Manual MIC-WKTI and MIC-WKT-IR Installation Manual EN 2 MIC-WKT and MIC-WKT-IR Washer Pump Drive Card Kits

More information

ABB i-bus EIB Shutter Actuators JA/S 2.230.1, JA/S 4.230.1, JA/S 8.230.1, JA/S 4.230.1M, JA/S 8.230.1M, JA/S 4.24.1

ABB i-bus EIB Shutter Actuators JA/S 2.230.1, JA/S 4.230.1, JA/S 8.230.1, JA/S 4.230.1M, JA/S 8.230.1M, JA/S 4.24.1 Product Manual ABB i-bus EIB Shutter Actuators JA/S 2.230.1, JA/S 4.230.1, JA/S 8.230.1, JA/S 4.230.1M, JA/S 8.230.1M, JA/S 4.24.1 Intelligent Installation Systems Contents Page 1 Introduction.......................................

More information

Model 201 Wiegand Touchpad Reader Installation Guide

Model 201 Wiegand Touchpad Reader Installation Guide Model 201 Wiegand Touchpad Reader Installation Guide P/N 460353001C 15AUG11 2011 UTC Fire & Security. All rights reserved. This document may not be copied in whole or in part or otherwise reproduced without

More information

Power Supply / Battery Charger Units, incorporating load switching relays for Smoke Dispersal, Bell Booster or other uses

Power Supply / Battery Charger Units, incorporating load switching relays for Smoke Dispersal, Bell Booster or other uses BCU Power Supplies Power Supply / Battery Charger Units, incorporating load switching relays for Smoke Dispersal, Bell Booster or other uses Installation, Commissioning and O perating Manual BCU RANGE

More information

T-Leg Electric Height Adjustable Tables

T-Leg Electric Height Adjustable Tables T-Leg Electric eight Adjustable Tables Glides only Related tables: KTXE6036G KTXE7236G Unboxing You should have received your top plus two boxes per table. Box 1 includes: T-Leg assemblies, feet castings,

More information

OPL BASIC. Dosing System for Professional Laundry machines. Contents

OPL BASIC. Dosing System for Professional Laundry machines. Contents OPL BASIC Dosing System for Professional Laundry machines Contents 1 Getting Started. Page 2 2 Installation. Page 4 3 Set Up & Operation. Page 8 4 Maintenance & Accessories. Page 10 5 Troubleshooting Page

More information

LED-256D RGB. User Manual. Innovation, Quality, Performance. Professional Entertainment Technology. EC - Declaration of Conformity

LED-256D RGB. User Manual. Innovation, Quality, Performance. Professional Entertainment Technology. EC - Declaration of Conformity EC - Declaration of Conformity We declare that our products (lighting equipments) comply with the following LED-256D RGB specification and bears CE mark in accordance with the provision of the Electromagnetic

More information

(for Intelligent Server model BMS-LSV4E only)

(for Intelligent Server model BMS-LSV4E only) INSTALLATION MANUAL BACnet TM SOFTWARE Model: BMS-STBN E (for Intelligent Server model BMS-LSV4E only) Thank you very much for purchasing this TOSHIBA BACnet Software. Please read this manual carefully

More information

4000 Series audio door entry system (using 9307.1 power supply) Installation Instructions IN9307.1

4000 Series audio door entry system (using 9307.1 power supply) Installation Instructions IN9307.1 Unit, AM Business Park umberland Avenue Park Royal, London, NW 7QL t : f : w : www.doorentrydirect.com 4 Series audio door entry system (using 7. power supply) Installation Instructions IN7. 7 Getting

More information

2400W PIR LIGHT C O N T R O L L E R Cat No. SLW2400

2400W PIR LIGHT C O N T R O L L E R Cat No. SLW2400 2400W PIR LIGHT C O N T R O L L E R Cat No. SLW2400 1 Introduction The SLW2400 utilises passive infrared technology to detect heat radiation of moving human bodies. Upon detection, the attached lighting

More information

Simple temperature measurement using a PT100 loop powered temperature transmitter.

Simple temperature measurement using a PT100 loop powered temperature transmitter. Simple temperature measurement using a PT100 loop powered temperature transmitter. SEM203P SEM310(X) SEM1801 SEM206P SEM315 SEM1802 SEM210(X) SEM1603P TTR200(X) SEM213P SEM1610 SEM1802 Pt100 Probes A Pt100

More information

UNICOM 2500 UNICOM 2500. Installation Operation Programming. Universal Communication Converter

UNICOM 2500 UNICOM 2500. Installation Operation Programming. Universal Communication Converter User Manual UNICOM 2500 Installation Operation Programming Universal Communication Converter UNICOM 2500 Electro Industries/GaugeTech 1800 Shames Drive Westbury, New York 11590 Tel 516.334.0870 Fax 516.338.4741

More information

Outdoor Housing Installation Instructions

Outdoor Housing Installation Instructions Outdoor Housing Installation Instructions 1 Outdoor power supply connection box Outdoor wall mount Outdoor corner mount Outdoor hard ceiling mount Outdoor pole mount See the Axis Web site at http://www.axis.com

More information

ITI Indoor and Outdoor Long-Life PIR Motion Sensors

ITI Indoor and Outdoor Long-Life PIR Motion Sensors ITI Indoor and Outdoor Long-Life PIR Motion Sensors Document Number: 466-1543 Rev.D November 1998 ITI Indoor and Outdoor Motion Sensor Do not use outdoor motion sensors for intrusion protection. Be careful

More information

I N S T R U C T I O N D A T A

I N S T R U C T I O N D A T A I N S T R U C T I O N D A T A 107660-200 107660-300 107660-400 107660-500 107660- RFL CMI CONVERTER E1 TX TX/RX E1 RX PWR ELECT FO FO RX FO TX Boonton, New Jersey USA Figure 1. Typical, Front Panel view

More information

LASER. Analog Laser Displacement Transducer. LAS Series. Key-Features:

LASER. Analog Laser Displacement Transducer. LAS Series. Key-Features: LASER Analog Laser Displacement Transducer LAS Series Key-Features: Contents: Measurement Principle & Installation Overview of the Series Technical Data Technical Drawings Diagrams Order Code Accessories

More information

REDWALL. MegaRed 180 Dual Range detector Model LRP 180QH Installation and Set-up Instructions. (Please keep for future reference)

REDWALL. MegaRed 180 Dual Range detector Model LRP 180QH Installation and Set-up Instructions. (Please keep for future reference) REDWALL MegaRed 180 Dual Range detector Model LRP 180QH Installation and Set-up Instructions (Please keep for future reference) DESCRIPTION Model LRP 180QH is designed to detect human movement at ranges

More information

KNX R. Rain Sensor. Installation and Adjustment

KNX R. Rain Sensor. Installation and Adjustment EN KNX R Rain Sensor Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical specifications... 3 2. Installation and commissioning... 4 2.1. Installation notes... 4 2.2. Location... 4

More information

Wind Sensor W-RS485 with RS485 Interface

Wind Sensor W-RS485 with RS485 Interface Wind Sensor W-RS485 with RS485 Interface Technical data and notes for installation Elsner Elektronik GmbH Steuerungs- und Automatisierungstechnik Herdweg 7 D-75391 Gechingen Germany Phone: +49 (0) 70 56/93

More information

Self-leveling Rotary Laser Level FRE-203 Green

Self-leveling Rotary Laser Level FRE-203 Green Self-leveling Rotary Laser Level FRE-203 Green P.R.Engineering Ltd Chesterfield, UK. Tel +44 (0)1246 269 777 www.laser-level.co.uk 1. Overview Our model FRE-203 Green output instruments are equipped with

More information