AV Surround Receiver SR6009. Owner s Manual. Contents Connections Playback Settings Tips Appendix. Front panel Display Rear panel Remote Index

Transcription

1 . AV Surround Receiver SR6009 You can print more than one page of a PDF onto a single sheet of paper. Owner s Manual 1

2 Accessories 8 Inserting the batteries 9 Operating range of the remote control unit 9 Features 10 High quality sound 10 High performance 10 Easy operation 13 Part names and functions 14 Front panel 14 Display 18 Rear panel 20 Remote control unit 23 Connections Connecting speakers 27 Speaker installation 27 Speaker connection 31 Speaker configuration and Amp Assign settings 34 Connecting a TV 43 Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) 44 Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) 45 Connection 3 : TV equipped without an HDMI connector 46 Connecting a playback device 47 Connecting a DVD player or Blu-ray Disc player 48 Connecting a set-top box (Satellite tuner/cable TV) 49 Connecting a video camcorder or game console 50 Connecting a turntable 51 Connecting a device with a multi-channel output connector 52 Connecting an ipod or USB memory device to the USB port 53 Connecting an FM/AM antenna 55 Connecting to a home network (LAN) 57 Wired LAN 57 Wireless LAN 58 Connecting an external control device 59 REMOTE CONTROL jacks 59 DC OUT jacks 60 Connecting the power cord 61 2

3 Playback Basic operation 63 Turning the power on 63 Selecting the input source 63 Adjusting the volume 64 Turning off the sound temporarily (Muting) 64 Playback a DVD player/blu-ray Disc player 64 Playing an ipod 65 Listening to music on an ipod 66 ipod Browse Mode settings 67 Performing repeat playback 69 Performing random playback 69 Playing a USB memory device 70 Playing files stored on USB memory devices 71 Listening to music on a Bluetooth device 73 Pairing with a Bluetooth device 74 Playing a Bluetooth device 75 Pairing with the Pairing Mode 77 Listening to FM/AM broadcasts 78 Listening to FM/AM broadcasts 79 Tuning in by entering the frequency (Direct Tune) 81 RDS search 81 PTY search 82 TP search 83 Radio Text 83 Changing the tune mode (Tune Mode) 84 Tuning in to stations and presetting them automatically (Auto Preset Memory) 84 Presetting the current broadcast station (Preset Memory) 85 Listening to preset stations 85 Specify a name for the preset broadcast station (Preset Name) 86 Skipping preset broadcast stations (Preset Skip) 87 Cancelling Preset Skip 88 3

4 Listening to Internet Radio 89 Listening to Internet Radio 90 Playing the last played Internet Radio station 91 Using vtuner to add Internet Radio stations to favorites 92 Playing back files stored on a PC and NAS 93 Applying media sharing settings 94 Playing back files stored on a PC and NAS 95 Viewing photographs on the Flickr site 97 Viewing photographs shared by particular users 98 Viewing all photographs on Flickr 100 AirPlay function 101 Playing songs from your iphone, ipod touch or ipad 102 Playing itunes music with this unit 102 Selecting multiple speakers (devices) 103 Perform itunes playback operations with the remote control unit of this unit 103 Spotify Connect function 104 Playing Spotify music with this unit 104 Convenience functions 105 Performing repeat playback 106 Performing random playback 106 Registering to Favorites 107 Playing back content added to the Save to Favorites 107 Deleting content added to favorites 108 Searching content with keywords (Text Search) 108 Playing back music and a favorite picture at the same time (Slideshow) 109 Setting the Slideshow Interval 110 Adjusting the volume of each channel to match the input source (Channel Level Adjust) 111 Adjusting the tone (Tone) 112 Displaying your desired video during audio playback (Video Select) 113 Adjusting the picture quality for your viewing environment (Picture Mode) 114 Playing the same music in all zones (All Zone Stereo) 115 4

5 Selecting a sound mode 116 Selecting a sound mode 117 Direct playback 118 Pure Direct playback 118 Auto surround playback 119 HDMI control function 130 Setting procedure 130 Sleep timer function 131 Using the sleep timer 132 Smart select function 133 Calling up the settings 134 Changing the settings 135 Web control function 136 Controlling the unit from a web control 136 Panel lock function 138 Disabling all key button operations 138 Disabling all button operations except VOLUME 138 Canceling the Panel lock function 139 Remote lock function 140 Disabling the sensor function of the remote control unit 140 Enabling the remote sensor function 140 Playback in ZONE2 (Separate room) 141 Connecting ZONE2 141 Playback in ZONE2 143 Settings Menu map 145 Menu operations 148 Inputting characters 149 Using the keyboard screen 150 Audio 151 Dialog Level Adjust 151 Subwoofer Level Adjust 151 Surround Parameter 152 M-DAX 156 Audio Delay 157 Volume 157 Audyssey 158 Graphic EQ 161 Video 163 Picture Adjust 163 HDMI Setup 165 Output Settings 169 On Screen Display 173 TV Format 174 5

6 Inputs 175 Input Assign 175 Source Rename 177 Hide Sources 177 Source Level 177 Input Select 178 Speakers 179 Audyssey Setup 179 Procedure for speaker settings (Audyssey Setup) 181 Error messages 187 Retrieving Audyssey Setup settings 188 Manual Setup 189 Amp Assign 189 Speaker Config. 190 Distances 192 Levels 193 Crossovers 194 Bass 195 Front Speaker 196 Network 197 Information 197 Connection 197 Wi-Fi Setup 198 Settings 200 IP Control 201 Friendly Name 202 Diagnostics 202 Maintenance Mode 203 General 204 Language 204 ECO 204 ZONE2 Setup 206 Zone Rename 208 Smart Select Names 208 Trigger Out 208 Front Display 209 Information 209 Usage Data 211 Firmware 212 Setup Lock 214 Limiting the operating zone with the remote control 215 6

7 Tips Contents Connections Playback Settings Tips Appendix Tips 217 Troubleshooting 219 Resetting factory settings 237 Appendix About HDMI 238 Video conversion function 241 Playing back a USB memory devices 243 Playing back a Bluetooth device 244 Playing back a file saved on a PC or NAS 245 Playing back Internet Radio 246 Personal memory plus function 246 Last function memory 246 Sound modes and channel output 247 Sound modes and surround parameters 248 Types of input signals, and corresponding sound modes 251 Explanation of terms 254 Trademark information 264 Specifications 266 Index 272 License 275 7

8 Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product. Quick Start Guide CD-ROM (Owner s Manual) Safety Instructions Notes on radio Cable labels Power cord FM indoor antenna AM loop antenna Sound calibration microphone (ACM1HB) Sound calibration microphone stand Remote control unit (RC025SR) R03/AAA batteries External antennas for Bluetooth/wireless connectivity 8

9 Inserting the batteries 1 Remove the rear lid in the direction of the arrow and remove it. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries. 2 Insert two batteries correctly into the battery compartment as indicated. R03/AAA batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. Approx. 7 m Put the rear cover back on. 9

10 Contents Connections Playback Settings Tips Appendix Features High quality sound High performance 0 With discrete circuit technology, the power amplifier provides 0 4K 60Hz input/output supported identical quality for all 7-channels (150 Watts x 7-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry). By using high current, high power discrete power devices, the amplifier is able to easily drive high quality speakers. 0 Current feedback amplifier This unit uses a high-speed current feedback amplifier circuit for its preamplifier so that signals from a Blu-ray Disc player and other equipment that support high-definition audio formats can be amplified with high fidelity. The high-speed current feedback amplifier also reproduces a natural sound space. 0 Audyssey DSX (v p. 160) This unit is equipped with Audyssey DSX processor. By connecting front height speakers to this unit and playing back with Audyssey DSX processing you can experience a more vertically expansive front soundstage. By connecting two front wide speakers, you can experience a wider and more expanded front soundstage. 0 DTS Neo:X (v p. 116) This technology enables the playback of 2-channel source audio or 7.1/5.1 multi-channel source audio through a maximum 7.1-channel speakers, achieving an even broader soundstage. Front panel Display Rear panel 4K 60p 4:4:4 4:4. 4K 60p 4:4:4 When 4K Ultra HD (High Definition) is used, an input/output speed of 60 frames per second (60p) is achieved for video signals. When connected to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy the sense of realism only available from high-definition images, even when viewing fast-moving video. This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit videos. By processing the video at the original resolution, this unit lets you enjoy flawless, high-definition picture quality. 10 Remote Index

11 Contents Connections Playback Settings devices (8 inputs, 2 outputs) resolution) to HD (720p/1080p) and 4K (v p. 171) / 8 2 4K In 4K Up scaling Out. Up to 1080p Appendix 0 HDMI connections enable connection to various digital AV 0 Digital video processor upscales analog video signals (SD 4K Tips. This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K ( pixels) resolution. This function enables the device to be connected to a TV using a single HDMI cable, and produces high definition images for any video source. For connection to a broad range of digital sources, this unit features 8 HDMI inputs, including 1 on the front panel that lets you quickly and conveniently connect a camcorder, game console or other HDMIequipped device. There s an HDMI output for the MAIN ZONE, and a second HDMI output for ZONE2. 0 Equipped with HDMI ZONE2 output (v p. 141) The ZONE2 multi-room output includes an HDMI output that lets you enjoy a different A/V source in that room, with another program playing in the main room. Front panel Display Rear panel 11 Remote Index

12 Contents Connections Playback Settings Tips Appendix 0 Wireless connection with Bluetooth devices can be carried out 0 The device is equipped with a AirPlay function in addition to easily (v p. 73).. network functions such as Internet radio etc. (v p. 101) You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television. This unit also supports Apple AirPlay which lets you stream your music library from an iphone, ipad, ipod touch or itunes. You can enjoy music simply by connecting wirelessly with your smartphone, tablet, PC, etc. 0 Compatible with the Marantz Remote App z for performing basic operations of the unit with an ipad, iphone or Android devices (Google, Amazon Kindle Fire) Marantz Remote App is application software that allows you to perform basic operations with an ipad, iphone, Android smartphone or Android tablet such as turning the unit ON/OFF, controlling the volume, and switching the source. 0 Playback of DSD and FLAC files via USB and networks This unit supports the playback of high resolution audio formats such as DSD (2.8 MHz) and FLAC 192 khz files. It provides high quality playback of high resolution files. z Download the appropriate Marantz Remote App for your ios or Android devices. This unit needs to be connected to the same LAN or Wi-Fi (wireless LAN) network that the iphone or ipod touch is connected to. Front panel Display Rear panel 12 Remote Index

13 Contents Connections Playback Settings 0 Multi-Room audio (v p. 115) GMAIN ZONEH Tips Appendix Easy operation GZONE2H 0 Setup Assistant provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. 0 Easy to use Graphical User Interface. This unit is equipped with a Graphical User Interface for improved operability. You can select and playback the respective inputs in the MAIN ZONE and in ZONE2. In addition, when the All Zone Stereo function is used, the music being played back in the MAIN ZONE can be enjoyed in all the zones at the same time, which is useful when you want to hear BGM throughout the whole house. 0 Energy-saving design This unit is equipped with an ECO Mode function that allows you to enjoy music and movies while reducing the power consumption during use, and also an auto-standby function that automatically turns off the power supply when the unit is not in use. This helps reduce unnecessary power use. Front panel Display Rear panel 13 Remote Index

14 Part names and functions Front panel Aq wb ec Dr te yf ug 14

15 q w e u A Power operation button (X) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). (v p. 63) B Power indicator This is lit as follows according to the power status: 0 Off: Power on 0 Red: Normal standby 0 Orange: 0 When HDMI Pass Through is set to On (v p. 166) 0 When HDMI Control is set to On (v p. 167) 0 When IP Control is set to Always On (v p. 201) r t y C INPUT SELECTOR knob This selects the input source. (v p. 63) D Display This displays various pieces of information. (v p. 18) E Remote control sensor This receives signals from the remote control unit. (v p. 9) F VOLUME knob This adjusts the volume level. (v p. 64) G Door When you are using buttons and/or connectors behind the door, press the bottom of the door to open it. Be careful not to catch your fingers when closing the door. 15

16 With the door open qw ert y u i o Q0 A PURE DIRECT button This switches the sound mode between Direct, Pure Direct and Auto surround. (v p. 118, 119) B PURE DIRECT indicator This lights when the Pure Direct mode is selected as the sound mode. (v p. 118) C M-DAX button This switches the M-DAX mode. (v p. 156) D M-DAX indicator This lights when the M-DAX mode is selected. (v p. 156) E ZONE2 ON/OFF button This turns the power of ZONE2 (separate room) on/off. (v p. 143) F ZONE2 SOURCE button This selects the input source for ZONE2. (v p. 143) G Tuner preset channel buttons (TUNER PRESET CH +, ) These select preset broadcast stations. (v p. 85) H DIMMER button Each press of this switches the brightness of the display. (v p. 209) I STATUS button Each press of this switches the status information that is shown on the display. (v p. 67) J SOUND MODE button Switching the sound mode. (v p. 116) 16

17 Q1 Q2 Q3 Q4 Q5 L SETUP MIC jack This is used to connect the supplied Sound calibration microphone. (v p. 182) M USB port This is used to connect USB storages (such as USB memory devices) and the USB cable supplied with ipod. (v p. 53) N AUX1-HDMI connector This is used to connect HDMI output compatible devices such as video camcorders and game consoles. (v p. 50) O AUX1 INPUT connectors Used to connect analog output compatible devices such as video camcorders and game consoles. (v p. 50) K Headphones jack (PHONES) This is used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the PRE OUT connectors. NOTE To prevent hearing loss, do not raise the volume level excessively when using headphones. 17

18 Display The input source name, sound mode, setting values and other information are displayed here. o Standard display o Tuner display These light up according to the reception conditions when the input source is set to Tuner. e r A Volume indicator q B Input source indicator The currently selected input source name is displayed. If the input source name has been changed using Source Rename (v p. 177) in the menu, the input source name after the change is displayed. w C Lights up when the broadcast is properly tuned in. D In the FM mode, this lights up when receiving stereo broadcasts. 18

19 o Sleep timer indicator o ZONE2 power on display y t E This lights when the sleep mode is selected. (v p. 131) F This lights up when ZONE2 (separate room) power is turned on. (v p. 143) 19

20 Rear panel Aq wb ec Dr te y ug Hi Io JQ0 Aq KQ1 FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK LQ2 MQ3 Q4 N Q5 O PQ6 Q7 20

21 CENTER SURROUND SURROUND BACK FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK Contents Connections Playback Settings Tips Appendix qw e r ty u FRONT FRONT SURROUND SURROUND BACK A Bluetooth/wireless LAN antenna connectors Used to connect the included external antennas for Bluetooth/wireless connectivity when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. (v p. 58) A Place the external antennas for Bluetooth/wireless connectivity evenly over the screw terminal of rear. B Turn clockwise until the antennas is fully connected. C Rotate the antenna upwards for best reception. q B DC OUT jack Used to connect devices equipped with the trigger function. (v p. 60) C Digital audio connectors (DIGITAL AUDIO) Used to connect devices equipped with digital audio connectors. (v p. 45, 49) D RS-232C connector Used to connect home automation controller devices fitted with RS-232C connectors. Consult the owner s manual of the home automation controller for more information about serial control of this unit. E FLASHER IN jack Used when using a control BOX or other such control devices to control this unit. F NETWORK connector Used to connect to a LAN cable when connecting to a wired LAN network. (v p. 57) G SIGNAL GND terminal Used to connect a ground wire for the turntable. (v p. 51) 21

22 CENTER SURROUND SURROUND BACK Contents Connections Playback Settings Tips Appendix FRONT FRONT io SURROUND Q0 SURROUND BACK Q2 Q3 Q4 Q5 Q6 Q7 H REMOTE CONTROL jacks Used to connect infrared receivers/transmitters in order to operate this unit and external devices from a different room. (v p. 59) I Video connectors (VIDEO) Used to connect devices equipped with video connectors. (v p. 48, 49) J HDMI connectors Used to connect devices equipped with HDMI connectors. (v p. 44, 45, 48, 49) K AC inlet (AC IN) Used to connect the power cord. (v p. 61) Q1 L FM/AM antenna terminals (ANTENNA) Used to connect FM antennas and AM loop antennas. (v p. 55) M Analog audio connectors (AUDIO) Used to connect devices equipped with analog audio connectors. (v p. 48, 49) N 7.1-channel input connectors (7.1CH IN) Used to connect to a device that has multi-channel audio output connectors. (v p. 52) O Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 31) P PRE OUT connectors Used to connect a subwoofer with built-in amplifier or power amplifier for ZONE2. (v p. 32, 142) Q Component video connectors (COMPONENT VIDEO) Used to connect devices equipped with component video connectors. (v p. 48, 49) NOTE Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 22

23 Remote control unit q w e r t y u A ZONE SELECT buttons (MAIN, ZONE2) These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit. (v p. 143, 148) B Input source select buttons These selects the input source. (v p. 63, 143) C Channel/page select buttons (CH/PAGE df) These select radio stations registered to presets or switch pages. (v p. 67, 85) D MUTE button (:) This mutes the output audio. (v p. 64, 144) E Information button (INFO) This displays the status information on the TV screen. (v p. 210) F Cursor buttons (uio p) These select items. (v p. 148) G BACK button This returns to the previous screen. (v p. 148) 23

24 Q1 Q2 H System buttons These perform playback related operations. (v p. 67) 0 Skip buttons (8, 9) 0 Play/pause button (1/3) Tuning up / Tuning down buttons (TUNE +, ) These select either FM broadcast or AM broadcast. (v p. 79) I SMART SELECT buttons (1 4) These call up settings registered to each button, such as input source, volume level and sound mode settings. (v p. 133) J SOUND MODE buttons These select the sound mode. (v p. 116) 0 MOVIE button 0 MUSIC button 0 GAME button 0 PURE button K Remote control signal transmitter This transmits signals from the remote control unit. (v p. 9) L SLEEP button This sets the sleep timer. (v p. 131) i o Q0 24

25 Q3 Q4 Q5 M POWER button (X) This turns the power on/off. (v p. 63, 143) N ECO Mode button (G) This switches to ECO Mode. (v p. 204) O VOLUME buttons (df) These adjusts the volume level. (v p. 64, 144) P OPTION button This displays the option menu on the TV screen. (v p. 105) Q ENTER button This determines the selection. (v p. 148) R SETUP button This displays the menu on the TV screen. (v p. 148) Q6 Q7 Q8 25

26 o Contents Connecting speakers 27 Connecting a TV 43 Connecting a playback device 47 Connecting an ipod or USB memory device to the USB port 53 Connecting an FM/AM antenna 55 Connecting to a home network (LAN) 57 Connecting an external control device 59 Connecting the power cord 61 o Cables used for connections Provide necessary cables according to the devices you want to connect. Speaker cable Subwoofer cable HDMI cable NOTE 0 Do not plug in the power cord until all connections have been completed. However, when the Setup Assistant is running, follow the instructions in the Setup Assistant (page 9 in the separate Quick Start Guide ) screen for making connections. (During Setup Assistant operation, the input/output connectors do not conduct current.) 0 Do not bundle power cords together with connection cables. Doing so can result in noise. Component video cable Video cable Coaxial digital cable Optical cable Audio cable L R L R LAN cable 26

27 Connecting speakers Install speakers and connect them to this unit. (v p. 27, 31) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. FHL SL SBL FWL FL SW1 C SB FR SW2 FWR FHR SR SBR FL/FR (Front speaker left/right): C (Center speaker): SL/SR (Surround speaker left/right): SBL/SBR (Surround back speaker left/right): FHL/FHR (Front height speakers left/right): FWL/FWR (Front wide speakers left/ right): SW 1/2 (Subwoofer) : Place the FRONT left and right speakers an equal distance from the main listening position. The distance between each speaker and your TV should also be the same. Place the CENTER speaker in between the front speakers and above or below your TV. Place the SURROUND left and right speakers an equal distance to the left and right sides of the main listening position. If you don t have surround back speakers, move the surround speakers slightly behind your listening position. Place the SURROUND BACK left and right speakers an equal distance from the main listening position and directly behind the main listening position. When using a single surround back speaker (SB), place it directly behind the listening position. Place the FRONT HEIGHT left and right speakers just outside of the front left and right speakers. Mount them as close to the ceiling as possible and aim them towards the listening position. Place the FRONT WIDE left and right speakers outside of the front left and right speakers so that there is an equal distance between all front speakers. Place the SUBWOOFER at a convenient location near the front speakers. If you have two subwoofers, place them asymmetrically across the front of your room. 27

28 0 This unit is compatible with Audyssey DSX (v p. 254), Dolby Pro Logic gz (v p. 256) and DTS Neo:X (v p. 257) which offers an even wider and deeper surround sensation. When using Audyssey DSX, install front wide speakers or front height speakers. When using Dolby Pro Logic gz, install front height speakers. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same. Front height speaker Point slightly downwards At least 1 mz1 Front speaker Front wide speaker z2 45 Surround speaker cm GViewed from the sideh z1 Recommended for Dolby Pro Logic gz z2 Recommended for Audyssey DSX Surround back speaker Point slightly downwards 28

29 o When 7.1-channel speakers are installed using surround back speakers o When 7.1-channel speakers are installed using front height speakers FHL FHR FL FR FL FR SW C z1 z2 z3 SW z2 z1 C z3 SL SR SL SR SBL Listening position SBR z 1:22-30 z 2: z 3: z 1:22-30 z 2:22-45 z 3: When using a single surround back speaker, place it directly behind the listening position. 29

30 o When 7.1-channel speakers are installed using front wide speakers o When 5.1-channel speakers are installed FL FR FL FR FWL SL SW C z2 z1 z3 SR FWR SL z2 SW C z1 SR z 1: z 2: z 3: z 1:22-30 z 2:120 30

31 Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other. ( Protection circuit (v p. 263)) 0 Never touch the speaker terminals while the power cord is connected. Doing so could result in electric shock. When the Setup Assistant (page 9 in the separate Quick Start Guide ) is running, follow the instructions in the Setup Assistant screen for making connections. (Power is not supplied to the speaker terminals while the Setup Assistant is running.) 0 Use speakers with an impedance of 4 16 Ω/ohms. NOTE 0 Carry out the following settings when using a speaker with an impedance of 4 6 Ω/ohms. 1. Press and hold the main unit s ZONE2 SOURCE and STATUS for at least 3 seconds. Video Format < PAL> appears on the display. 2. Press DIMMER on the main unit twice. Sp.Imp. <8ohms> appears on the display. 3. Press TUNER PRESET CH + or TUNER PRESET CH - on the main unit to select the impedance. 6ohms: 4ohms: Select when the impedance for any of the connected speakers is 6 Ω/ohms. Select when the impedance for any of the connected speakers is 4 Ω/ohms. 4. Press the main unit s STATUS to complete the setting. 31

32 o Connecting the speaker cables 1 Carefully check the left (L) and right (R) channels and + (red) and (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. o Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. The same signal is output from the respective subwoofer terminals. FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 2 Turn the speaker terminal counterclockwise to loosen it. 3 Insert the speaker cable s core wire to the hilt into the speaker terminal. SW1 SW2 4 Turn the speaker terminal clockwise to tighten it. 32

33 o About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. FRONT L FRONT R CENTER SURROUND L SURROUND R Speaker terminals SURROUND BACK L SURROUND BACK R FRONT HEIGHT / WIDE L FRONT HEIGHT / WIDE R SUBWOOFER Color White Red Green Light blue Blue Beige Brown Light purple Purple Black Attach the speaker cable label for each channel to its speaker cable as shown in the diagram. Refer to the table above and attach the label to each speaker cable. Then, make connection so that the color of the speaker terminal matches that of the speaker cable label. Speaker G How to attach the speaker cable label H This unit 33

34 Speaker configuration and Amp Assign settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the Amp Assign (v p. 189) settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback. Perform Amp Assign settings to suit the number of rooms and speaker configuration to be installed. (v p. 189) Playback speaker and zone MAIN ZONE ZONE2 Amp Assign settings Connection page 5.1-channel Not used Main Only (Default) channel (surround back) Not used Main Only (Default) channel (front height) Not used Main Only (Default) channel (front wide) Not used Main Only (Default) channel (bi-amp connection for front speaker) Not used Bi-Amp channel + front speaker of second unit Not used Front B channel 2-channel ZONE2 41 The sound mode that can be selected varies according to the speaker configuration. See Relationship between sound modes and channel output (v p. 247) for the sound modes that are supported. 34

35 o Standard configuration and connection n 5.1-channel This serves as a basic 5.1-channel surround system. Sound modes such as Dolby Pro Logic g are supported. FL FR FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW C SL SR SW FR FL C SR SL 35

36 n 7.1-channel (surround back) This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. Sound modes such as Dolby Pro Logic gx are supported. FL FR FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW SL SR SW FR FL C SR SL SBR SBL SBL SBR When using a single surround back speaker, connect it to the SURROUND BACK L connector. 36

37 n 7.1-channel (front height) This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. Sound modes such as Dolby Pro Logic gz, DTS Neo:X and Audyssey DSX are supported. FHL FHR FL FR FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW C SL SR SW FR FL C SR SL SBR SBL FHR FHL 37

38 n 7.1-channel (front wide) This 7.1-channel surround system is the same as a basic 5.1-channel system but with front wide speakers. Sound modes such as DTS Neo:X and Audyssey DSX are supported. FL FR FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK FWL SW C FWR SL SR SW FR FL C SR SL SBR SBL FWR FWL 38

39 o Applied configuration and connection n 5.1-channel (bi-amp connection of front speaker) This is a method of connecting separate amplifiers to the tweeter terminals and woofer terminals of bi-amp compatible speakers. This connection enables back EMF (power returned without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality. FL (Bi-Amp) FR (Bi-Amp) FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW C SL SR SW C SR SL NOTE When making bi-amp connections, be sure to remove the short-circuiting plate or wire between the speaker s woofer and tweeter terminals. q (R) (L) w q w FR FL 39

40 n 5.1-channel + front speaker of second unit This system enables switching playback between front speakers A and B as desired. FL (B) FL (A) FR (A) FR (B) FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW C SL SR SW FR (A) FL (A) C SR SL FR (B) FL (B) 40

41 n 5.1-channel (MAIN ZONE) + 2-channel (ZONE2) This connection method constructs a 5.1-channel speaker system in the MAIN ZONE and a 2-channel system in ZONE2. MAIN ZONE FL FR FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK SW C SL SR SW FR FL C SR SL ZONE2 R ZONE2 L ZONE2 ZONE2 L ZONE2 R 41

42 o Connecting an external power amplifier 0 You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. 0 Select the terminal to use and connect the device. Subwoofer (Primary) SUB- WOOFER 2 AUDIO SUB- WOOFER 1 Power amplifiers AUDIO FRONT CENTER SURROUND SURROUND BACK L R L R L R Subwoofer (Secondary) AUDIO L R L R L R L R L R L R FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 42

43 Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. Is the TV equipped with an HDMI connector? Yes Is the TV compatible with the ARC (Audio Return Channel)? Yes No No Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) (v p. 44) Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) (v p. 45) Connection 3 : TV equipped without an HDMI connector (v p. 46) 43

44 Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set HDMI Control to On when using a TV that supports the ARC function. (v p. 167) TV HDMI IN (ARC) FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK When using the HDMI control function, connect to the HDMI MONITOR connector. 44

45 Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. OUT OPTICAL OUT TV IN HDMI IN FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 45

46 Connection 3 : TV equipped without an HDMI connector Use a component video or a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. OUT OPTICAL OUT TV VIDEO IN IN COMPONENT VIDEO IN Y PB PR or FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 46

47 Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable. 0 Connecting a DVD player or Blu-ray Disc player (v p. 48) 0 Connecting a set-top box (Satellite tuner/cable TV) (v p. 49) 0 Connecting a video camcorder or game console (v p. 50) 0 Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit. 0 The source that is assigned to the HDMI IN, DIGITAL AUDIO IN, COMPONENT VIDEO IN, VIDEO IN and AUDIO IN connectors can be changed. See Input Assign on how to change the input source assigned to the input connectors. (v p. 175) 0 To play back audio signals that are input to this unit on a TV connected via HDMI, set in the menu HDMI Audio Out to TV. (v p. 166) 47

48 Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) DVD player AUDIO AUDIO COAXIAL OUT OUT R L VIDEO OUT VIDEO COMPONENT VIDEO OUT Y PB PR DVD player HDMI OUT Blu-ray Disc player HDMI OUT R L or or R L FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 48

49 Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. AUDIO OUT R L (HDMI incompatible device) Satellite tuner/ Cable TV AUDIO COAXIAL OUT VIDEO OUT VIDEO COMPONENT VIDEO OUT Y PB PR Satellite tuner/ Cable TV HDMI OUT R L or or R L FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 49

50 Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. (HDMI incompatible device) Video camcorder Video camcorder AUDIO AUDIO OUT L R VIDEO VIDEO OUT HDMI OUT L R L R 50

51 Connecting a turntable This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit s input source to Phono and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers. Turntable (MM cartridge) AUDIO OUT GND L R NOTE FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK The earth terminal (SIGNAL GND) of this unit is not for safety grounding purposes. If this terminal is connected when there is a lot of noise, the noise can be reduced. Note that depending on the turntable, connecting the ground line may have the reverse effect of increasing noise. In this case, it is not necessary to connect the ground line. 51

52 Connecting a device with a multi-channel output connector You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. To play analog signals input from 7.1CH IN connectors, set Input Mode (v p. 178) to 7.1CH IN. Devices with a multi-channel output connector (Blu-ray Disc player, DVD player, External decoder etc.) SUB- WOOFER FRONT L R AUDIO CENTER SURROUND L R SURROUND BACK L R L R L R L R L R L R L R FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK 0 The video signal can be connected in the same way as a Blu-ray Disc player/dvd player. Connecting a DVD player or Blu-ray Disc player (v p. 48) 0 When a device is connected to the SBL/SBR terminal of 7.1CH IN connectors, set Assign Mode (v p. 189) to Main Only. 52

53 Connecting an ipod or USB memory device to the USB port To connect an ipod to this unit, use the USB adapter cable that was supplied with the ipod. For operating instructions see Playing an ipod (v p. 65) or Playing a USB memory device (v p. 70). USB memory device ipod or Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device s supplied AC adapter. NOTE 0 USB memory devices will not work via a USB hub. 0 It is not possible to use this unit by connecting the unit s USB port to a PC via a USB cable. 0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices. 53

54 o Supported ipod/iphone models ipod classic ipod nano ipod touch iphone 54

55 Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. ( Listening to FM/AM broadcasts (v p. 79)) AM loop antenna (supplied) If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit. NOTE 0 Do not connect two FM antennas simultaneously. 0 Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. FM indoor antenna (supplied) Black FRONT FRONT CENTER SURROUND White q w e 55

56 o Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. o AM loop antenna assembly 1 2 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Insert the projecting part into the square hole in the stand. Nail, tack, etc. Standing alone Use the procedure shown above to assemble. When assembling, refer to AM loop antenna assembly. Loop antenna Stand Square hole Projecting part 56

57 Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below. 0 Playback of network audio such as Internet Radio and from your media server(s) 0 Playback of music content from online streaming services 0 Using the Apple AirPlay function 0 Operation on this unit via the network 0 Firmware Update For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop. Wired LAN To make connections via wired LAN, use a LAN cable to connect the router to this unit as shown in the figure below. Internet Modem PC NAS (Network Attached Storage) To WAN side To LAN port To LAN port LAN port/ Ethernet connector LAN port/ Ethernet connector Router 57

58 FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK Contents Connections Playback Settings Tips Appendix Wireless LAN When connecting to the network via wireless LAN, connect the external antennas for Bluetooth/wireless connectivity connection to the rear panel and stand them upright. See Wi-Fi Setup (v p. 198) on how to connect to a wireless LAN router. Internet Router with access point Modem To WAN side 0 When using this unit, we recommend you use a router equipped with the following functions: 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Only use a shielded STP or ScTP LAN cable (readily available at electronics stores). (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. 0 When using a router that supports the WPS (Wi-Fi Protected Setup)function, Wi- Fi connection can be carried out easily. 0 When using this unit connected to a network with no DHCP function, configure the IP address, etc. in Network. (v p. 197) NOTE 0 The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. 0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if your contracted line is not set using PPPoE. 0 Do not connect a NETWORK connector directly to the LAN port / Ethernet connector on your computer. 0 Various online services may be discontinued without prior notice. 58

59 Connecting an external control device REMOTE CONTROL jacks o Performing operations by RC on this unit without visual contact You can connect an external IR receiver to the REMOTE CONTROL connectors to perform operations on this unit with the supplied remote control unit without visual contact. This might be necessary if the unit is hidden in a cupboard or corner, so you can t directly point with the remote control unit to the device. To do this, disable the remote control signal receiving function ( Remote lock function (v p. 140)). o Remotely connecting Marantz devices When you are using a Marantz device other than this unit that supports remote connection, you can transmit remote control signals just by connecting the device to the REMOTE CONTROL IN/OUT connector with a monaural cable. Set the remote control switch located on the rear panel of the connected audio component to EXTERNAL or EXT. to use this feature. RC OUT Infrared retransmitter CENTER SURROUND SURROUND T CENTER SURROUND SURROUND SURROUND BACK NOTE When the remote control signal receiving function is disabled, you can not perform operations with the remote control unit. 59

60 DC OUT jacks When a device with DC IN jack is connected, the connected device s power on/standby can be controlled through linked operation to this unit. The DC OUT jack outputs a maximum 12 V DC /150 ma electrical signal. 12 V DC/150 ma trigger-compatible device FRONT FRONT CENTER SURROUND SURROUND SURROUN NOTE 0 Use a monaural mini-plug cable for connecting the DC OUT jack. Do not use a stereo mini-plug cable. 0 If the permissible trigger input level for the connected device is larger than 12 V DC/150 ma, or has shorted, the DC OUT jack cannot be used. In this case, turn off the power to the unit, and disconnect DC OUT jack. 60

61 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. D SURROUND SURROUND BACK SURROUND BACK To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied) 61

62 Contents Connections Playback Settings Tips Appendix o Contents Basic operation Turning the power on 63 Selecting the input source 63 Adjusting the volume 64 Turning off the sound temporarily (Muting) 64 Selecting a sound mode 116 Playback a device Playing a DVD player/blu-ray Disc player 64 Playing an ipod 65 Playing a USB memory device 70 Playing a Bluetooth device 75 Listening to FM/AM broadcasts 78 Playback network audio/service Listening to Internet Radio 89 Playing back files stored on a PC and NAS 93 Viewing photographs on the Flickr site 97 AirPlay function 101 Spotify Connect function 104 Convenience functions Convenience functions 105 HDMI control function 130 Sleep timer function 131 Smart select function 133 Panel lock function 138 Remote lock function 140 Other functions Web control function 136 Playback in ZONE2 (Separate room)

63 Basic operation Input source select buttons ZONE SELECT MAIN ZONE 2 CBL/SAT GAME TV AUDIO ipod/usb ONLINE MUSIC DVD AUX1 AUX2 CD PHONO SLEEP POWER Blu-ray MEDIA PLAYER TUNER Bluetooth INTERNET RADIO POWER X 1 Turning the power on Press POWER X to turn on power to the unit. 0 You can press the input source select button when the unit is in standby mode to turn on the power. 0 You can also switch the power to standby by pressing X on the main unit. ECO MUTE : CH / PAGE INFO MUTE ENTER VOLUME OPTION VOLUME df 1 Selecting the input source Press the input source select button to be played back. The desired input source can be selected directly. BACK SETUP You can also select the input source by turning INPUT SELECTOR on the main unit. TUNE - TUNE + SMART SELECT MOVIE SOUND MODE MUSIC GAME PURE 63

64 Adjusting the volume 1 Use VOLUME df to adjust the volume. 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning VOLUME on the main unit. Turning off the sound temporarily (Muting) 1 Press MUTE :. 0 MUTE appears on the display. 0 : appears on the TV screen. Playback a DVD player/blu-ray Disc player The following describes the procedure for playing DVD player/blu-ray Disc player Prepare for playback. A Turn on the power of the TV, subwoofer and player. B Change the TV input to the input of this unit. Press POWER X to turn on power to the unit. Press DVD or Blu-ray to switch an input source for a player used for playback. Play the DVD player or Blu-ray Disc player. o Surround playback (v p. 116) 0 The sound is reduced to the level set at Mute Level in the menu. (v p. 157) 0 To cancel mute, either adjust the sound volume or press MUTE : again. 64

65 Playing an ipod ZONE SELECT MAIN ZONE 2 CBL/SAT GAME DVD AUX1 SLEEP POWER Blu-ray MEDIA PLAYER 0 You can use the USB cable provided with the ipod to connect the ipod with the unit s USB port and enjoy music stored on the ipod. 0 For information on the ipod models that can be played back with this unit, see Supported ipod/iphone models (v p. 54). 0 See AirPlay function (v p. 101) on how to play a music file saved on an iphone, ipod touch, ipad or itunes on this unit via the network. TV AUDIO AUX2 TUNER ipod/usb ipod/usb CD Bluetooth ONLINE MUSIC PHONO INTERNET RADIO ECO CH/PAGE df CH / PAGE MUTE VOLUME uio p ENTER INFO BACK ENTER OPTION SETUP OPTION BACK TUNE - TUNE+ SMART SELECT /3 8 9 MOVIE SOUND MODE MUSIC GAME PURE 65

66 Listening to music on an ipod Connect the ipod to the USB port. (v p. 53) Press ipod/usb to switch the input source to ipod/ USB. Browse from ipod is displayed on the display of this unit. 0 Nothing is displayed on the TV screen. Operate ipod itself while seeing the ipod screen to play back music. o Operations accessible through the option menu This can be operated when the ipod Browse Mode (v p. 67) is set to From ipod. 0 ipod Browse Mode settings (v p. 67) 0 Adjusting the volume of each channel to match the input source (Channel Level Adjust) (v p. 111) 0 Adjusting the tone (Tone) (v p. 112) 0 Displaying your desired video during audio playback (Video Select) (v p. 113) 0 Adjusting the picture quality for your viewing environment (Picture Mode) (v p. 114) 0 Playing the same music in all zones (All Zone Stereo) (v p. 115) 0 ipod Browse Mode has two modes, From ipod and On-Screen. By default, From ipod, where you operate the ipod itself while looking at the ipod screen, is set. 0 To change to On-Screen, where you perform operations while having the ipod information displayed on the TV screen, see ipod Browse Mode settings (v p. 67). NOTE 0 Depending on the type of ipod and the software version, some functions may not operate. 0 Note that Marantz will accept no responsibility whatsoever for any problems arising with the data on an ipod when using this unit in conjunction with the ipod. 66