Your Part In Managing Shelf Life at GDLS-C. December 9, 2015 Ivey Spencer Leadership Centre London, Ontario
|
|
- Gladys Wright
- 7 years ago
- Views:
Transcription
1 Your Part In Managing Shelf Life at GDLS-C Ivey Spencer Leadership Centre London, Ontario
2 2
3 What is Shelf Life? According to Mil Std 129-P, Shelf Life is: 1. The total period of time beginning with the date of manufacture, cure date (for elastomeric and rubber products only), assembly, or pack (subsistence only), 2. OR after visual inspection/certified laboratory test/restorative action, that an item may remain in the combined wholesale (including manufacturer s) and retail storage systems and still remain suitable for issue to and/or consumption by the end user. 3
4 Why Should You Care? GDLS-C is required to comply with Mil-Std 129P We must manage, control, and package shelf life products appropriately We require our suppliers to comply with these requirements in our Standard Ts & Cs Clause 48 By managing shelf life we ensure the products we provide are of the highest quality and meet our customers expectations 4
5 What is a Shelf Life Item? An item that possesses deteriorative or unstable characteristics to the degree that a storage time period must be assigned to ensure that it will perform satisfactorily in service. Shelf Life items fall into 2 Categories: Type 1: Definite shelf life Type 2: Extendable or re-certifiable 5
6 Type 1 Shelf Life Items An individual item of supply, which is determined through an evaluation of technical test data and/or actual experience, to be an item with a definite nonextendible period of shelf-life Typically rubber products, tapes and adhesives 6
7 Type 2 Shelf Life Items An item that has an assigned shelf-life time period that may be extended after completion of visual inspection or certified laboratory test, and/or restorative action Examples are paint, hydraulic fluids, fire extinguishers & hose assemblies We treat Type 2 items in 2 different ways: 1. Re-certifiable items are returned to the supplier 2. Maintainable items are managed by our Warehouse team 7
8 Why 2 Different Shelf Life Durations? The remaining Shelf Life duration on aftermarket parts is more strict than production material Our Service Parts Customers require 85% of shelf life at the time of shipment We need 90% of SL remaining to allow for packaging and presentation Our Production floor will consume material right up until expiry 25% of Shelf Life remaining allows us to move material to the floor well before expiry 8
9 Technical Guidelines & The Arbitration Board GDLS-C developed the Technical Guidelines document to help GDLS-C and our suppliers identify shelf life items We have established an Arbitration Board to resolve SL discrepancies The Board reviews the part drawing, the supplier s documentation, as well as appropriate technical guidelines and makes a final decision You will be notified of any decision that is contrary to what you have provided to GDLS-C 9
10 How Do I Notify GDLS-C? ORACLE isupplier Sourcing Responses 10
11 How Do I Notify GDLS-C? Your Buyer may ask for documentation Your information may conflict with another supplier s Shelf Life determination This will result in an Arbitration Board ruling Your packing slips should contain shelf life information Parts cannot be received into the warehouse if they are not labeled correctly 11
12 Please Don t Ship Product Expired or Unidentified material is Non- Conforming and will be treated accordingly Material will be sent to the Discrepant Material Control area You will be requested to provide acceptable Shelf Life information If you are unable to do so, the material will be returned to you for replacement 12
13 Accurate Shelf Life Labels Required 13
14 Accurate Shelf Life Labels Required 14
15 Commonly Asked Questions Are hoses Type 1 or Type 2 items They can be both. Uncut hoses are typically Type 1 items, while hoses that have been assembled with connectors or fittings are typically considered Type 2 Why should I label parts and packaging Appropriate identification ensures parts are received into the warehouse with ease. No identification = non-conformance Labeled parts allow us to control expiry in the warehouse and ensures we are delivering conforming parts to our Customers 15
16 Commonly Asked Questions What about shelf life parts that are consumed in assemblies If shelf life parts are consumed in assemblies (for example a gasket adhered to a metal part), the assembly is not a shelf life item. Where can I find more information Refer to GDLS-C s Technical Guidelines document. It, along with the presentation, and questions & answers of today, will be available on GDLS-C s website early next week. 16
17 Commonly Asked Questions What is the difference between shelf life and service life An item enters its service life when it is consumed or assembled for its intended purpose. Example - when an adhesive is used to glue a neoprene pad onto a bracket. There is no shelf life requirement for the adhesive and pad in the bracket assembly; it is considered service life at that point. Please refer to the Mil Hand Book and the Mil Stds referenced in this presentation 17
18 To Learn More Technical Guidelines Document 1. MIL-HDBK-695E 2. SAE ARP5316 Rev B 3. SAE J1273 Rev Sep14 4. MIL-STD 129P 5. DOD M 6. DOD M Purchase Order Terms & Conditions 1. Clause Packaging Guidelines Our website 18
19
Supplier Quality Requirements and Clauses
Supplier Quality Requirements and Clauses Supplier Quality Requirements General The following Quality Notes (QN01 through QN19) apply to and form a part of all Purchase Orders issued by Advanced Conversion
More informationHelical Products Co., Inc.
Q01 GENERAL REQUIREMENTS 1. Supplier Responsibilities 1.1. Delivery Certification By delivering products or services on the Contract, the Supplier certifies that such products or services are in compliance
More informationINTRODUCTION: PURPOSE:
UMBRA CUSCINETTI, INC. 2916 100 th Street SW Everett, WA 98204-1340 USA 425-743-2577 FAX: 425-347-0682 Printed versions may not be the latest. Suppliers shall utilize the latest version which can be found
More informationBogue Machine Company, Inc. Business Instruction
Bogue Machine Company, Inc. Business Instruction Document Title: Supplier Quality Control Requirements Document Number: Revision: Document Owner: Mark Bogue Backup Owner: Craig Bogue Parent Document: PURP-004,
More informationGE Power Electronics Business Total Quality Management for Suppliers
GE Power Electronics Business Total Quality Author: Reviewers: Contributors: Alessandro A. Cervone Technical Manager Component & Reliability Engineering Alicia Scott Title Erika Nannis Title Robert Roessler
More informationSupplier Quality Assurance Requirements Manual
1701 West Tacoma Broken Arrow, Ok. 74012 Supplier Quality Assurance Requirements Manual Approved: Bryan Sanderlin President/COO/CEO OSECO, Inc. Darrel Bilke Quality Assurance Manager OSECO, Inc. 1 Record
More informationAnti-Counterfeit Policy Mouser has adopted this Anti-Counterfeit Policy to eliminate the impact of counterfeit products on Mouser and its customers.
QS-PR-024 Anti-Counterfeit Control Plan Approved by: Chuck Amsden Approved 1/19/15 This procedure is current and approved when viewed on-line. The procedure becomes uncontrolled when printed. Uncontrolled
More information2.1.1. Distributors In addition to the requirements noted herein, Distributors shall have a Quality System
1. Purpose This document defines requirements for suppliers providing aerospace and defense materials, products and services to Electromech Technologies. Supplier acceptance of a purchase order from Electromech
More information1) CERTIFICATE OF COMPLIANCE/CONFORMANCE
Standard Supplier Quality Requirements This document defines restrictions and quality system requirements applicable when goods and services are procured to SMART ELECTRONICS part numbers or Military,
More informationProduct Order Quality Requirements Meggitt (Orange County), Inc.
Product Order Quality Requirements Meggitt (Orange County), Inc. Reference QP8-051, Purchase Order Quality Requirements QP8-055, Review/Control Supplier Documentation PP-401, Quality Assurance Codes 50-2-351,
More informationCopies of this document shall be classified either as Controlled or Uncontrolled, and shall be identified as such on the cover sheet.
INTRODUCTION This document describes an inspection system broken down into four separate levels. When Inspection Level IV is invoked, this system meets the requirements of former MIL-I-45208A. The primary
More informationSupplier Quality Assurance Requirements Manual
12716 EAST PINE STREET TULSA, OK 74116 Supplier Quality Assurance Requirements Manual Approved: Mike Collins Quality Assurance Manager Precise Machining & Manufacturing 1 Record of Revisions Revision D
More informationSelf-Audit Checklist
Page 1 Company Name: Date of audit: Date of last audit performed: Name of person performing self-audit: Signature: Name of person responsible for quality system: Signature: Number of non-compliances: Page
More informationQuality Assurance Provisions
Page 1 of 5 1. Purpose and Scope. The purpose of this document is to define the Quality Assurance Provisions FLIR Systems Inc. requires for inventory material received from Suppliers. This document applies
More informationQuality Assurance Requirements. For. Pratt & Whitney/Space Propulsion, Chemical Systems Division
Quality Assurance Requirements For Pratt & Whitney/Space Propulsion, FORM 06.13.02.02 (REV. 6) Page 1 of 14 Table of Contents SECTION I QUALITY SYSTEMS REQUIREMENTS... 5 1. QUALITY ASSURANCE PROGRAM...
More information4.0 Receiving Process
4.0 Receiving Process Delivery of requested products or services marks a transition in the Purchase-to-Pay process from a purchasing activity to a payables activity. All purchases must be received to release
More informationSupplier Quality Assurance
Supplier Quality Assurance Preface We strive to continually improve our process performance by meeting quality objectives. It is imperative that our suppliers operate under the zero defects and 100% on
More informationIEC Electronics Terms and Conditions
IEC Electronics Terms and Conditions 1. General: This Purchase Order is placed subject to these terms and conditions including those within the Purchase Order. The terms of any proposal referred to in
More informationSupplier Quality. Assurance Provisions. Manual. SQAP-001 Rev. E
9060 WINNETKA AVENUE NORTHRIDGE, CA 91324 USA Supplier Quality Assurance Provisions Manual SQAP-001 Revision E Page 1 of 14 Table of Contents 1 General Requirements... 4 1.1 Supplier Control... 4 1.2 Supplier
More informationTHE FOLLOWING ARE INSTRUCTIONS FROM THE FRONT SIDE OF SEAGATE PURCHASE ORDERS:
THE FOLLOWING ARE INSTRUCTIONS FROM THE FRONT SIDE OF SEAGATE PURCHASE ORDERS: INSTRUCTIONS: Read this entire order form, including the incorporated terms and conditions located at http://www.seagate.com/about/legal-privacy/purchasing-and-pricing/purchase-orders-legal-overview/
More informationPPI/TZ Standard Quality Requirements for Suppliers -SQRS-
PPI/TZ Standard Quality Requirements for Suppliers -SQRS- AS9100, ISO 13485 and ISO 9001 Revision: November 16, 2015 For questions concerning Standard Quality Requirements for Supplier (SQRS), please contact
More informationKOLLMORGEN. Title: Standard Operating Procedure Counterfeit Parts
Approved By: Elliott Major Date: 11-19-09 Page 1 of 9 Rev ECO Date Approve Rev ECO Date Approve A R01_13541 07-23-10 DWL B R01_14787 12-15-11 DWL C R01_14910 03-07-12 DWL D R01_14964 04-16-12 DWL 1.0 Purpose
More informationTHE FOLLOWING ARE INSTRUCTIONS FROM THE FRONT SIDE OF SEAGATE PURCHASE ORDERS:
THE FOLLOWING ARE INSTRUCTIONS FROM THE FRONT SIDE OF SEAGATE PURCHASE ORDERS: INSTRUCTIONS: Read this entire order form, including the incorporated terms and conditions located at http://www.seagate.com/about/legal-privacy/purchasing-and-pricing/purchase-orders-legal-overview/
More informationSupplier Guide. Suppliers for production material or services may be qualified for the list in one or more of the following ways:
Supplier Guide Purpose The purpose of this guide is to inform potential and current Suppliers to Jay Industries, Inc. of our policies as well as quality and performance requirements. Application This guide
More informationUNCONTROLLED COPY FOR REFERENCE ONLY
CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President
More informationLot: a group of product that is unique to time, date and location of manufacture.
Supplier ar Code Labeling Requirements E-43002 1 Scope and Purpose This document establishes requirements for package labeling and date or lot code segregation for suppliers providing material to enchmark
More informationQ2A First Article Inspection (FAI) AS9102 * Revised ** Added
Page 1 of 5 Q2A First Article Inspection (FAI) AS9102 * Revised ** Added NOTE: A hard copy of this document may not be the document currently in effect. The current version is always the version on the
More informationPUBLICATIONS. Introduction
Page: 1 of 10 Introduction 1. The requirements of this document supplement the Factory Production Control requirements given in Table 1 of PN111 by giving the specific requirements for Factory Production
More informationHow To Ensure Quality Assurance
1001 Robb Hill Road Oakdale, PA 15071-3200 412/923-2670 PROCUREMENT SPECIFICATION: SUPPLIER QUALITY MANAGEMENT SYSTEM REQUIREMENTS Specification Number: ATI-QA-703, Rev 4 Date: 11/12/13 Page: 1 of 7 Written
More informationSupplier Quality Requirements F16 Program
ISRAEL AEROSPACE INDUSTRIES LTD. MILITARY AIRCRAFT GROUP, LAHAV DIVISION DOCUMENT IDENTIFIER : WF16Z/150901 Supplier Quality Requirements F16 Program RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY
More informationINTERNATIONAL SUPPLY CONTRACT TEMPLATE
INTERNATIONAL SUPPLY CONTRACT TEMPLATE Download International Supply Contract sample in Word format. Fill in the blanks and choose the terms of this international agreement that best suit your needs. DATE:...
More information1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
More informationQUALITY CONTROL MANUAL
QUALITY CONTROL MANUAL TABLE OF CONTENTS PREFACE I II III IV Title Page Table of Contents Information Page Revision Log SECTION DESCRIPTION 1.0 Introduction 2.0 Organization 3.0 Organization Chart 4.0
More informationQUALITY ASSURANCE PROVISIONS OF PURCHASE ORDER
QUALITY ASSURANCE PROVISIONS OF PURCHASE ORDER Lockheed Martin and LMC hereinafter shall mean Lockheed Martin Maritime Systems & Sensors, Maritime Security & Ship Systems (MS&SS), a Lockheed Martin Company.
More informationQuality Control Procedures QCP 5.5 Page 1 of 5
Quality Control Procedures QCP 5.5 Page 1 of 5 1.0 PURPOSE CERTIFIED SUPPLIER PROGRAM To establish quality requirements for the selection, implementation and maintenance of the Certified Supplier Program.
More informationQuality Requirements for Suppliers
ESC9100 Rev D Quality Requirements for Suppliers This document is the property of The United Technologies Aerospace Corporation and is loaned with the understanding that neither this document, nor any
More informationGood Manufacturing Practices for the Production of Packaging Inks formulated for use on the non food contact surfaces of food packaging and articles
Good Manufacturing Practices for the Production of Packaging Inks formulated for use on the non food contact surfaces of food packaging and articles intended to come into contact with food October 2005
More informationQualified Contractor Management System
FCIA Education Program Quality Module UL Qualified Contractor Firm Candidates Management System & Audit Preparation Education FCIA July 8, 2007; November 2007; March 2008 FCIA Management System Education
More informationMIL-STD-2073-1 Standard Practice for Military Packaging
MIL-STD-2073-1 Standard Practice for Military Packaging Presented By: Richard Mast Date 19 July 2011 Revision 5, 7 Jun 2010 Agenda Review the organization and content of the MIL-STD-2073-1 1. Scope Purpose
More informationQuality Supplier Requirements for Beckwith Electric Co., Inc.
Quality Supplier Requirements for Beckwith Electric Co., Inc. This Page Left Intentionally Blank To Our Valued Suppliers: One of the primary goals of Beckwith Electric is to provide the highest Quality
More informationUL Qualified Firestop Contractor Program Requirements April 2012
UL Qualified Firestop Contractor Program Requirements April 2012 For more information, please contact your local UL Field Representative INTRODUCTION: In order for a firestop systems installer/contractor
More informationISO/TS 16949:2002 Guidance Document
ISO/TS 16949:2002 Guidance Document Introduction ISO/TS 16949:2009 emphasizes the development of a process oriented quality management system that provides for continual improvement, defect prevention,
More informationSolarEdge Technologies Ltd.
SolarEdge Technologies Ltd. GENERAL TERMS AND CONDITIONS 1. General. This document, entitled General Terms and Conditions (referred to herein as the Agreement ), forms an integral part of the quotation
More informationRTP s NUCLEAR QUALITY ASSURANCE PROGRAM
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP operates under one quality program, whether you purchase products that are commercial grade, nuclear safety-related or industrial safety compliant (IEC 61508).
More informationPharmaceutical Wholesaler Site Inspection Checklist
Pharmaceutical Wholesaler Site Inspection Checklist Date and time of inspection: Legal business name and plant name: Location (address): Phone number: Fax number: Email address: Web site URL: Contact Person:
More informationCartel Electronics. AS 9100 Quality Systems Manual
Cartel Electronics AS 9100 Quality Systems Manual 1900 C Petra Lane Placentia, California 92870 Introduction Cartel Electronics, as a global supplier to the aviation, space, and space industries, has developed
More informationPresentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme
Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme ISO/TS 16949 IATF Scheme rules 4 th edition areas that impact BSI Clients Copyright 2014 BSI. All rights reserved.
More informationQuality Assurance Manual ISO 9001:2000. Uncontrolled copy
ISO 9001:2000 Uncontrolled copy Approved by: Hugue Meloche, Eng. Page 1 of 24 Intellectual Property This document, prepared by Meloche Group Inc. for its company in the Valleyfield region, remains the
More informationForth Engineering (Cumbria) Limited QUALITY MANUAL. Quality Manual Issue 4 Updated April 2012. Authorised by: Managing Director.
Quality Manual Issue 4 Forth Engineering (Cumbria) Limited QUALITY MANUAL Copy Number: 1 The information contained in this Manual is the property of Forth Engineering (Cumbria) Limited and must not be
More informationUnit 205 Order, receive and store pharmaceutical stock
Element 1 Element 2 Element 3 Order pharmaceutical Receive pharmaceutical Store pharmaceutical 223 224 Element 1 Element 2 Element 3 Order pharmaceutical Receive pharmaceutical Store pharmaceutical Background
More informationL-3 Communications Corporation AMI Purchase Order Supplement No. 3 Quality Assurance
Q10 QUALITY SYSTEM REQUIREMENTS Q10A Q10B ISO 9001:2008 Seller s quality system shall be in compliance with the requirements of ISO 9001, Model for in Design, Development, Production, Installation and
More informationALL PRODUCTS MFG & SUPPLY
ALL PRODUCTS MFG & SUPPLY 618 ANDERSON DRIVE ROMEOVILLE, IL 60446 PHONE: 877-255-8700 FAX: 877-255-8701 WWW. APGASKET.COM QUALITY MANAGEMENT SYSTEM MANUAL DATE: 11/20/12 REVISION 9.1 UNCONTROLLED COPY
More informationAviation Suppliers Association Quality System Standard. ASA-100 Revision 3.5
Page 1 Aviation Suppliers Association Quality System Standard ASA-100 Revision 3.5 Original Issue: March 1994 Revision 3.5 Release Date: September 1, 2008 Effective Date: November 1, 2008 Copyright 1994-2008
More informationDOCUMENT CS/1: SCHEME DESCRIPTION AND BENEFITS
WELDING FABRICATOR CERTIFICATION SCHEME DOCUMENT CS/1: SCHEME DESCRIPTION AND BENEFITS 6 th Edition July 2012 Issued under the authority of the Governing Board for Certification All correspondence should
More informationMIL-STD 2073: STANDARD PRACTICE FOR MILITARY PACKAGING
MIL-STD 2073: STANDARD PRACTICE FOR MILITARY PACKAGING DOCUMENT OVERVIEW MIL-STD 2073-1D [military or mil standard, sometimes referred to as a MilSpec or military specification] details military packaging
More informationDOCUMENT PREPARATION UNDER LETTERS OF CREDIT
There are some universal requirements, including those listed below: DOCUMENT PREPARATION UNDER LETTERS OF CREDIT Document: THE LETTER OF CREDIT it is the correct referenced letter of it is still valid
More informationCh.1 Purchasing & Supply Chain Management
Module 1 : Purchasing Process. Ch.1 Purchasing & Supply Chain Management Edited by Dr. Seung Hyun Lee (Ph.D., CPM) IEMS Research Center, E-mail : lkangsan@iems.co.kr Definition of Supply Chain. Definition
More informationTERMS AND CONDITIONS OF SALE. Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits
Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits All quotations of Seller ( Quotations ) and purchase orders of Buyer ( Purchase Orders ) shall be subject to these
More informationChapter 10 Receiving, Inspection, Acceptance Testing and Acceptance or Rejection
Chapter 10 Receiving, Inspection, Acceptance Testing and Acceptance or Rejection Table of Contents Receiving, Inspection, Acceptance Testing and Acceptance or Rejection...1 Chapter 10...3 Receiving, Inspection,
More informationCommercial Cardiovascular Equipment
Commercial Cardiovascular Equipment Limited Warranty Limited Warranty. PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU
More informationCessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements
Cessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements Wichita KS Effective: 3-11-15 Rev. IR Page 1 of 6 1.0 Introduction This document establishes Cessna Interiors Manufacturing
More informationNorth American Labeling Requirements (Canada, Mexico and United States) TRW PROCEDURE WA.D20.001
North American North American (Canada, Mexico and United States) TRW PROCEDURE WA.D20.001 REVISIONS Date Release No. Description Revision Engineer Sep 2003 Initial Release A00 M. Rausch Jun 2004 ERD94762
More informationCompany Quality Manual Document No. QM Rev 0. 0 John Rickey Initial Release. Controlled Copy Stamp. authorized signature
Far West Technology, Inc. ISO 9001 Quality Manual Document No.: QM Revision: 0 Issue Date: 27 August 1997 Approval Signatures President/CEO Executive Vice President Vice President/CFO Change Record Rev
More informationEnergy Products (Safety and Efficiency) Regulations 2012
Version: 10.5.2012 South Australia Energy Products (Safety and Efficiency) Regulations 2012 under the Energy Products (Safety and Efficiency) Act 2000 Contents 1 Short title 2 Commencement 3 Interpretation
More informationQuality Manual. DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1
Quality Manual Approval Page Document: QA1000 Issue Date: 5/29/1997 Page 1 of 17 Revision Date: 5/20/2013 DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1 This
More informationPPG SUPPLIER DEVELOPMENT ASSESSMENT
Supplier: Address: Products: Assessment Date: Assessment Team: Certification: Supplier Contacts Position E-mail Phone General Comments: Assessment Results Summary Sections Non-conformity Action Point Quality
More informationPOLYURETHANE LINING AND COATING ON PIPE RAW WATER
POLYURETHANE LINING AND COATING ON PIPE RAW WATER PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2
More informationFinancial Instruments
There are two basic forms of Letters of Credit: Standby (SBLC) and Documentary (DLC). Financial Instruments Documentary Letters of Credit can be either Revocable or Irrevocable, although the first is extremely
More informationTOTAL QUALITY MANAGEMENT II QUALITY AUDIT
TOTAL QUALITY MANAGEMENT II Chapter 13: QUALITY AUDIT Dr. Shyamal Gomes Introduction: The term audit was defined in the 16th Century as the official examination of the accounts with verification by reference
More informationSUPPLIER Form #: 007 AUDIT QUESTIONNAIRE
1.0 BACKGROUND INFORMATION Company Name: Company Address: Phone Number: Fax Number: Number of years in business: Number of employees: Annual Sales in Dollars: Size of Facility in Square Feet: Name of Senior
More informationAviation Suppliers Association Quality System Standard. ASA-100 Revision 4.0
Page 1 Aviation Suppliers Association Quality System Standard ASA-100 Revision 4.0 Original Issue: March 1994 Revision 4.0 Release Date: August 1, 2015 Effective Date: August 24, 2015 Copyright 1994-2015
More informationQuality Management System Manual
Quality Management System Manual Assurance ISO / AS Manual Quality Management System EXCEEDING ALL EXPECTATIONS Since our inception in 1965, Swiss-Tech has supplied the medical, aerospace, hydraulic, electronic
More informationAS9100 Quality Manual
Origination Date: August 14, 2009 Document Identifier: Quality Manual Revision Date: 8/5/2015 Revision Level: Q AS 9100 UNCONTROLLED IF PRINTED Page 1 of 17 1 Scope Advanced Companies (Advanced) has established
More informationMINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS
MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS CONTENTS 1. CONTROL PLANS 2. PROCESS APPROACH 3. PERFORMANCE 4. INTERNAL AUDITING 5. CONTROL OF NON-CONFORMING PRODUCT 6.
More informationOffice of Logistics Management. A Solutions Driven Department. Logistics Policies & Procedures
Office of Logistics Management A Solutions Driven Department Logistics Policies & Procedures 1. Policy: West Dock Restricted Area The West Receiving dock (FB016) is a restricted area. Only Management staff
More informationThe certification process
TS004(COS)v01 The certification process for COSMOS standard Standard in force available on www.cosmos-standard.org or sent on request. 1 Contents I. When to apply... 3 II. The different steps in the certification
More informationMTV-FS1 / FS1T / FSB375
MTV-FS1 / FS1T / FSB375 MYE Entertainment Freestanding LCD TV Floor Stand with Base Assembly Instructions man_mtvfs1_b3 www.myeclubtv.com Table of Contents Parts List 3 Parts Identification......3 Hardware
More informationNew Program Quality Requirements for Suppliers (NPQR) For Limited Manufacturing of Components and/or Processes for Engineering Certification
New Program Quality Requirements for Suppliers (NPQR) For Limited Manufacturing of Components and/or Processes for Engineering Certification Revision A New Program Quality Requirements for Suppliers Rev.
More informationMSC Group Chain of Custody (CoC) Guidance for Non-Reduced Risk Groups
MSC Group Chain of Custody (CoC) Guidance for Non-Reduced Risk Groups 1. About this document This document is a non-normative guidance document intended to help companies understand CoC requirements. The
More informationGENERAL WELDING & FABRICATING, INC. 991 Maple Road Elma, New York 14059
QUALITY MANUAL GENERAL WELDING & FABRICATING, INC. 991 Maple Road Elma, New York 14059 Distribution: Position Location Copy # President / CEO Office 1 Operations Manager Office 2 Quality Assurance Office
More informationArticle 1: Subject. Article 2: Orders - Order Confirmation
GENERAL CONDITIONS OF PURCHASE Article 1: Subject 1.1 The following general conditions of purchase (the "General Conditions") establish the contractual conditions governing the purchase of raw materials,
More informationRepair Station Training Suspected Unapproved Parts
Title 14 CFR Part 1 Part 21 Part 43 Part 45 Part 91 Part 121 Part 135 Part 145 Information & References Advisory Circular AC 21-29-B AC 20-62 General FAA Info Suspected Unapproved Parts Program Plan (Report
More informationGLOBAL AEROSPACE PROCEDURE
1 of 13 1. PURPOSE: This procedure establishes the minimum PPG Aerospace requirements for a Supplier's Quality Plan. These requirements pertain to the documentation and inspection/testing necessary to
More informationGuide Contents. 7 Common Drivers for Chemical Management. Page. Page 2. Adhesive Technologies - Chemical Management
Customer Guide Guide Contents Page 3 What is Chemical Management? 4 Why do customers choose Chemical Management? 5 Benefits of Chemical Management 6 Differentiators for Henkel 7 Common Drivers for Chemical
More informationISO 50001 Energy Management System
ISO 50001 Energy Management System DETAILED GUIDE ISO 50001 Background It has been estimated that the ISO 50001 Energy Management Standard could have a positive impact on some 60% of the world s energy
More informationPurchase Order Clauses and Conditions
Purchase Order Clauses and Conditions All purchase orders for materials, special processes, machining and fabrication services and end items are subject to the following requirements: General Requirements:
More informationVendor Package. WAWF-RA Home Page. WAWF-RA Web Based Training
Vendor Package Thank you for your interest in doing business with the United States Air Force Academy (USAFA) in Colorado Springs, Colorado. We are eager to build long-term relationships with our vendors.
More informationASBESTOS IN THE HOME
ASBESTOS IN THE HOME This information will help you understand asbestos: what it is, its health effects, where it is in your home and what to do about it. Even if asbestos is present in your home, it is
More informationUL Qualified Firestop Contractor Program Management System Elements. March 13, 2013
UL Qualified Firestop Contractor Program Management System Elements March 13, 2013 UL and the UL logo are trademarks of UL LLC 2013 Benefits to becoming a Qualified Firestop Contractor Independent, 3 rd
More informationMake sure your builder is registered.
Marylanders purchase more than 10,000 new homes each year. The purchase of a new home is protected by Maryland law. Understanding your rights and responsibilities as a new home buyer protects your investment
More informationRockwell Automation Quality Management System
Rockwell Automation Quality Management System Our Quality Policy Rockwell Automation is committed to a global quality system focused on customer solutions. We achieve this through superior products and
More informationQuality Manual PA3-01-001
Rev 01C February 2008 2008, PhaseLink Corporation PhaseLink is the trademark of PhaseLink Corporation, www.phaselink.com CONTENTS 1. Purpose and scope:...3 1.1. Purpose:...3 1.2. Scope:...3 2. Introduction
More informationTerms and Conditions. 3012436v2 12285.01010
Terms and Conditions ACCEPTANCE. Except as otherwise agreed in a written agreement signed by both parties, these Terms and Conditions will govern Buyer s purchase order. BI Technologies acceptance of Buyer
More informationQuality Management System General
Audit Date: Quality Management System General Requirement: 4.1 and 4.2.2-QMS General Verify Scope Comments/Evidence/Findings: Verify the Exclusions is applicable and justified How are the processes in
More informationFlexible Circuits Inc. Purchase Order Standard Terms and Conditions
Flexible Circuits Inc. Purchase Order Standard Terms and Conditions 1. Acceptance- This writing, together with any attachments incorporated herein, constitutes the final, complete, and exclusive contract
More informationNEW YORK CITY FIRE DEPARTMENT. Notice of Public Hearing and Opportunity to Comment on Proposed Rules
NEW YORK CITY FIRE DEPARTMENT Notice of Public Hearing and Opportunity to Comment on Proposed Rules What are we proposing? The Fire Department is proposing to amend two rules. One relates to Fire Department
More informationHousekeeping Audit Check Sheet for Warehouse (Refer SOP QMS-105)
Area Audited Audit Date Week Wk1 Wk2 Wk3 Wk4 Office Documentation stored appropriately Contact lists near phones are clearly displayed, current and easily accessible. All personal items are stored in lockers.
More informationProcess of certification against the requirements of Annex C of ARP 0108. Roelof Viljoen Mining And Surface Certification CC
Process of certification against the requirements of Annex C of ARP 0108 Roelof Viljoen Mining And Surface Certification CC 1 Scope of presentation: Process of certification against the requirements of
More informationContents. Management Policy Manual SEM USA Page 2 of 12
SEM USA Page 2 of 12 Contents 1. The Schneider Electric Motion USA Management Policy... 3 2. PROCESS INTERACTION... 4 3. COMPANY OBJECTIVES:... 5 4. MANAGEMENT SYSTEM... 6 4.1. General Requirements...
More information