SOLAR LED STREET LIGHT GENERAL INFORMATION

Transcription

1 PRODUCT IMAGE PRODUCT IMAGE GENERAL INFORMATION Ideal alternative to traditional LED street light with solar energy Suitable for use with solar panel in sunshine place when electicity Save over 80% on energy costs Instantstart start, flickerfree free Free from mercury and other hazardous materials Long Life 50,000 hours Low heat output Other wattages and reflectors available (5w 8w 10w 12w 15w 30w 40w 50w 60w)

2 SPECIFICATIONS Product information Product Name 60w integrated solar led street light Model Number OE-LED-AIO W Light source quantity One(5w 8w 12w 15w 20w) Two(25w 30w 40w 50w 60w) LED chip Bridgelux LG Battery Lithium battery (12.8v/30AH) Input Voltage AC85-265V Light efficiency lm/w Working Tmperature -33 C-55 C Working voltage 30-36V lamp Size 120*41.5*8(CM) Beam Angle 120 degree Weight N.W(22.7Kg) G.W(25Kg) Power LED power 60W Syestem power62w CRI 75 CCT k Luminous Lifespan lm 50,000HRS Warranty 3 YEARS

3 TECHNICAL DATA SHEET ILLUMINATION INTENSITY CHART LIGHT DISTRIBUTION GRAPH

4 LUMEN ATTENUATION TECHNICAL DATA SHEET FEATURES 1.The biggest advantages of all in one/integrated solar street light are saving expensive costs of installation construction and commissioning, and transportation costs, usually only 10% of sepatated solar street lights. 2.all in one/integrated solar street light with five-year long life, is the world's advanced lithium management control technology, compared to some of the normal battery products which need to replace battery in 2 years, all in one solar street light costs can be greatly reduced in the future service and parts and usually does not require battery replacement or maintenance in 5 years.even if it need to be replaced after five years, due to the unique product design,under no technical support or engineers s guidance users only need a few minutes to complete replacing. 3.to do the project of integrated solar street light,in addition to products cost,the most important is to consider the overall cost, including transportation costs,installation and debugging costs, service fees, maintenance and repair of convenience, etc.

5 INSTALLATION 1.Depending on your lighting installation location, the pre-installed LED road lamp poles 2.due to lamps with glass fittings, during handling, storage, installation process please note that gently, weight, heavy falls. 3.Products into the mounting bracket, fix the product and the horizontal lock screw, aligning screw holes with M8 screws must be locked tight, adjust the lighting angle of elevation, reaches a specified request lamp lamp light angle. 4.When the lamp does not violate any fire codes. 5.Please get professional installation engineering and construction units. 6.Fixtures after the turn on the bottom surface of the lamp switch. SAFETY INFORMATION Always use the light ouside of itd packing Before lighting up,check if the light was damaged during transportation.if any damage is visible,please DO NOTinstall or use the light. Any maintenance should be performed by qualified electricians only. Keep packing materail away from the reach out of Never leave children unattended in the vicinity of the lights and do not allow them to play with elecrical devices Aovid looking directly into the beam,espcially for exetended periods of time.do not shine the LED light in another person's eyes Never cover the light with other objects MAINTENANCE Prior to cleaning the light,make sure it has been disconnected drom the power supply. Use a dry slight moistened cloth for clean. Never any chemicals or abrasives for cleaning

6 CONTACT US If you have any questions about this product or require any further information please contact us via the options below: T F One Electrical l Ltd Bankfield Road Manchester M29 8QH