SPECIFICATIONS WALL MOUNTED, 1 WORKER FILTRATION SYSTEM

Transcription

1 , W/O WALL MOUNTED, 1 WORKER FILTRATION SYSTEM Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements an optional CO monitor is available for continuous monitoring of carbon monoxide levels. Panel provides up to 15 CFM (25.48 m 3 /hr) of air within a PSI ( bar) range. CONSTRUCTION; Mounted on a rugged wall bracket External Connections: Optional Remote Strobe Light Alarm Electrochemical, replaceable Normal Operation, Peak, Battery Charge and Calibration mode. First Stage: 5 micron particulate element and automatic mechanical drain Third Stage: ppm activated carbon filter element and manual drain Regulator: High pressure, adjusting pressure knob, ( bar) pressure gauge and an Flow Meter: Adjustable metering valve, range from LPM 21¼ (53.9 cm) 8¼ (20.9 cm) 7¾ (19.6 cm) 11 lbs (4.9 kg)

2 Description: FILTRATION SYSTEM , W/O FIXED TO 2 OUTPUTS System for compressed air filtration that meets NIOSH regulations for breathing systems. Three stages of filtration: to dust, water, oil and hydrocarbons from compressed air. Optional Carbon Monoxide monitor is provided to monitor gas concentrations. Provides filtered air for Grade D breathing. FILTER SYSTEM: 1st stage: 2nd Stage: 3rd Stage: Regulator: Manometer: Filter 5 micron particles and automatic drain Coalescing filter cloth and drain 0010 microns manual Activated carbon filter of microns and manual drain High pressure adjustable knob range PSI gauge and external valve pressure relief Acrylic translucent, Teflon float, with adjustable valve. Graduations: LPM CARBON MONOXIDE MONITOR : Power Source: 115V AC adapter 9V DC 9V DC Alkaline battery (optional) Alarm: 10 ppm (Canada: 5ppm) with external connection for strobe light alarm. (PN optional) Audible Alarm: 90 db (Piezo) External LED Light Censor: Electrochemical, replaceable Buttons: "Mode" and "Set" Liquid Crystal Operations: Average, maximum battery charge and calibration Calibration: Auto Tune to 20 ppm of carbon monoxide 13" (32.5) 6" (15) 12" (30) 18 (8.1) Rev B

3 , W/O WALL MOUNTED, 5 WORKER SYSTEM Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements an optional CO monitor is available for continuous monitoring of carbon monoxide levels. Panel provides up to 60 CFM ( m 3 /hr) of air within a PSI ( bar) range. A 12 gauge, black powder coated steel bracket for mounting Power Source: 115V AC to 9V DC power adapter for continuous power supply 9V DC Alkaline battery (primary or as back up for AC adapter) Alarm Setting: 10 PPM (Canada: 5 PPM) Ext. Connections: Optional strobe light alarm Audible: 90 decibel Piezo alarm External power LED light signal Electrochemical, replaceable Normal operation, peak, battery charge and calibration mode Third Stage: ppm activated carbon filter element and manual drain Regulator: High pressure, adjusting pressure knob, ABS cover, psi ( bar) pressure gauge and an set at 125 psi (8.62 bar) 22 (55.8 cm) 7 (17.7 cm) 7¾ (19.6 cm) 15 lbs (6.8 kg)

4 , W/O WALL MOUNTED, 8 WORKER SYSTEM Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements an optional CO monitor is available for continuous monitoring of carbon monoxide levels. Panel provides up to 100 CFM (169.9 m 3 /hr) of air within a PSI ( bar) range. 12 gauge black powdered coated steel mounting bracket External Connections: Optional Strobe Light Alarm. Electrochemical replaceable Normal Operation, Peak, Battery Charge and Calibration mode. Third Stage: micron activated carbon filter element and manual drain Regulator: High pressure, adjusting pressure knob, psi ( bar) pressure gauge and Flow Meter: Adjustable metering valve, range from LPM 25 (63.5 cm) 7 (17.7 cm) 14 (35.5 cm) 21 lbs (9.5 kg)

5 INLINE FILTER , (W/O) WALL MOUNTED, 150 CFM FLOW-THRU, 1-12 WORKER SYSTEM Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements, a CO monitor is available for continuous monitoring of carbon monoxide levels. Panel provides up to 150 CFM (254.8 m 3 /hr) of air within a PSI ( bar) range. Meets NIOSH requirements for point-ofattachment. 12 gauge black powdered coated steel mounting bracket Inlet side: 1 NPT male nipple, made of Brass Outlet side: ¾ NPT male nipple, made of Brass (Included in model) External Connections: Optional Strobe Light Alarm. Electrochemical replaceable Normal Operation, Peak, Battery Charge and Calibration mode. Third Stage: micron activated carbon filter element and manual drain Regulator: High pressure, adjusting pressure knob, psi ( bar) pressure gauge and Flow Meter: Adjustable metering valve, range from LPM 22 (55.8 cm) 10 (25.4 cm) 19 (48.2 cm) 27 lbs (12.2 kg) Rev A