DOLLHOUSE BOOKCASE HARDWARE TOOLS REQUIRED COMPONENTS. WARNING: Adult Assembly Required wood dowels large bolts.

Transcription

1 OOKCSE HRDWRE 22 - wood dowels 30 - large bolts 16 - small 30 - flat washers 30 - spring washers Thank you for purchasing the Dollhouse ookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. Missing hardware? Please call for replacements. NOTE: Contains small parts. To avoid danger keep away from small children. TOOLS REQUIRED phillips head screwdriver (We recommend the use of hand tools instead of power tools)! WRNING: dult ssembly Required COMPONENTS 2 - side panels (1 left, 1 right) 1 - top shelf 1 - middle shelf 1 - bottom panel 1 - large 1 - medium 1 - small 2 - roof panels 1 - bottom back panel 1 - middle back panel 1 - top back panel Made in Vietnam - r05 Customer Service Latest instructions available on Page 1 of 5

2 OOKCSE NOTE: Middle shelf has pilot holes on the right side NOTE: Top shelf has pilot holes on the left side large NOTE: Make sure ledge of is facing right side of shelf as medium NOTE: Make sure ledge of is facing right side of shelf as ) Insert 2 wood dowels into middle shelf as ) ttach 1 large to middle shelf with 2 large bolts, 2 spring washers and 2 flat washers as Secure, but do not over tighten, bolts 1 with a phillips head screwdriver. 2 ) Insert 2 wood dowels into top shelf as ) ttach 1 medium to top shelf with 2 large bolts, 2 spring washers and 2 flat washers as top shelf assembly middle shelf assembly 3 ) Insert 2 wood dowels into of top shelf assembly as ) ttach middle shelf assembly with 2 large bolts, 2 spring washers and 2 flat washers as 4 ) Insert 8 wood dowels into left and right side panels as ) ttach shelf assembly to each side panel with 8 bolts, 8 spring washers and 8 flat washers as Page 2 of 5

3 OOKCSE small NOTE: Make sure angled edge of is facing towards the right ) Insert 6 wood dowels into shelf assembly as ) Fit dowels of assembly into corresponding holes of bottom panel and secure with 6 large bolts, 6 5 spring washers and 6 flat washers. 6 ) With the assistance of another adult, position unit upright. Insert 2 wood dowels into small as ) Fit dowels of into corresponding holes of assembly and secure with 2 large bolts, 2 spring washers and 2 flat washers as 7 Fit pre-assembled dowels of roof panel into corresponding holes of remaining roof panel, and secure with 2 large bolts, 2 spring washers and 2 flat washers as 8 With the assistance of another adult, attach roof assembly onto shelf assembly with 6 large bolts, 6 spring washers and 6 flat washers as Page 3 of 5

4 OOKCSE ttach top back panel to assembly with 6 small as Secure, but do not over tighten, 9 with a screwdriver. 10 ttach middle back panel to assembly with 3 small as CLENING ND CRE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. 11 ttach bottom back panel to assembly with 7 small as ssembly is now complete. Page 4 of 5

5 ! WRNING Serious or fatal crushing injuries can occur from furniture tip over. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. To help prevent tip-over, install tip restraint per instructions below. DOLLHOUSE OOKCSE MOUNTING HRDWRE mounting bracket large screw D 4 - plastic anchors 2 - wall straps 4 - small TOOLS REQUIRED 4 - large 4 - mounting brackets Missing hardware? Please call for replacements. NOTE: Contains small parts. Keep away from small children. C plastic anchor small screw wall strap mounting bracket phillips head screwdriver power drill (for pilot holes only) WLL MOUNTING SSEMLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach mounting bracket to top of unit using 2 small. ) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to the back of the unit. C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) ttach the mounting bracket to the wall by inserting 2 large through the mounting bracket and into the wall anchor in the wall. E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket. F) Lace one end of the wall strap through both brackets, and into the other end of the strap. G) Pull the strap tightly until secure. Repeat step -G for remaining wall mounting assembly. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional. Wall mounting assembly is now complete. Page 5 of 5