HIGH PRESSURE GEAR PUMP W300

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HIGH PRESSURE GEAR PUMP W300"

Transcription

1 HIGH PRESSURE GEAR PUMP W00 Concentric AB Innovation in Hydraulics

2 THE POWER OF THE W00 B SERIES Concentric is one of the world s leading manufacturers of hydraulic pumps. Our focus on important strategic markets such as trucks, construction equipment and materials handling has brought results: a series of high-performance hydraulic pumps. The W00 series builds on the versatile technical platform represented by the W series. W00 High Pressure Gear Pumps are optimized for demanding work, with harsh weather conditions, rugged operations and long service intervals. The W00 series is a range of cost-efficient small pumps for all applications in which the customer s demands for quality and accessibility are particularly high. FLANGE CODE 0,, - EFFICIENCIES

3 PERFORMANCE DATA Operating pressure range Inlet port: continuous, minimum -0,0 bar intermittent, minimum -0, bar maximum +,00 bar Outlet port (See tables on pages -) p II Pressure p I sec. at minimum 10 sec. at minimum Time p I continuous pressure p II intermittent pressure Product has been tested to 00,000 cycles at p ll. Pressure p ll is permitted at maxi. 10 sec loaded following sec minimum unloaded. Above represents performance wich can be expected from units incorporating flange flange port styles. Model code example for a single pump WP 0 B 1 B 008 R 0 MA 1 N Speed range Minimum speed for all pump sizes depends on the pump model in question and can be identified from Tables below onwards for respective models. Maximum speed for single pumps depends on the pump model in question and can be identified from Tables onwards for respective models. Noise performance data according to DIN. Typical levels for pump type WB1-, at 10 bar using mineral oil with viscosity of mm /s and at temperature of 0 C at different speeds: 100 min-1 00min-1 000min-1 db(a) db(a) db(a) 1 = Type = Series = Design revision = # of sections = Seal material = Displacement per section W00 DESCRIPTION The W00 pumps come in single configuration and have a two piece modular design. All, mounting flange, and rear cover are manufactured of high strength aluminium alloy. For optimum strength, gears and shafts are precision machined as a one-piecepart. The 11-tooth gear geometry has been optimized for low noise level and low pressure pulsation. All shaft bearing surfaces are continually cooled and lubricated by a controlled flow of fresh oil. This permits operation across a wide speed range at very high loads. Extra large slide bearings help guarantee a long service life. A wide range of mounting flanges and port sizes are available to meet all international standards = Rotation = Mounting flange = Drive shaft = Portings 11 = Valve options General data Displacement V cm Speed n rpm Pressure rated pressure p l up to intermettent pressure p ll up to bar Operating temperatures t up to C Average volumetric efficiency % The maximum values for n, p l and t for a given pump specification may be applied sim-ultaneously. Options Rectangular flanges, through bolt model. Tapered shaft with key, tang shaft. Thread ports of flange ports. Clockwise or anti-clockwise rotation. Integrated valve features. Hydraulic fluids. The use of HL-or HLP-hydraulic oil according to DIN 1 is recommended. The permissible viscosity for all WB pumps ranges from 800 to 1 mm /s. The permissible cold start viscosity is 000 mm /s. We recommend to contact Concentric before using fire resistant or bio-degradable fluids. Temperature range Amb. temperature, Fluid temperature, continuous operation, short term operation, Please note mini.- C; maxi. +80 C maxi. +80 C maxi. + C Viscosities -when operating at above temperature limits-have to remain within the range specified under Hydraulic Fluids. Fluid cleanliness Fluid cleanliness according to ISO /1 Code 18/1 or better is required in order to assure the pump s high level of efficiency in the long term. Drive arrangement Flexible couplings are preferred for direct drives. Please contact Concentric for indirect drive requirements. Mounting position As required. Symbol Single pump.

4 FLANGE CODE 0 All shaft bearings are continually cooled and lubricated by a controlled flow of fresh oil. This enables operation across a wide speed range at very high loads. The largesized slide bearings support the pump s long-life condition. A wide range of mounting flanges and port siezes are available to meet European and international standards. W00 pumps may also be supplied with threaded ports in the rear cover (Rear cover s shape is prepared for this option). This option can simplyfy installation where space is limited. INLET OUTLET Model code example for a single pump WP 0 B 1 B 008 R 0 MA 1 N = Type WP - Pump = Series 0-00 = Design revision B - nd release = # of sections 1 - Single = Seal material B - Buna = Displacement per section (See table below) = Rotation R - Clockwise L - Counter clockwise = Mounting flange 0 = Drive shaft MA = Portings 1 - G/8 + G/8 BSPP 1 - M18 x 1, + M1 x 1, 11 = Valve options N - None At CCW rotation inlet and outlet are reversed. Code Displ. Rated pressure Intermitt. Maxi. speed Mini. speed Dimensions Weight P l P ll A B C (approx.) [bar] [bar] [min -1 ] [min -1 ] [mm] [mm] [mm] kg 008-0,8cc ,1, 0,1 0, 01-1,cc ,8, 1,8 0, 01-1,cc ,,, 0, 00 -,0cc 0 0 0,,1, 0, 0 -,cc ,,9, 0,80 0 -,cc ,,, 0,8 08 -,8cc ,8 8,9,8 0,8 0 -,cc ,9,0,9 0, ,8cc ,0 1,0,0 0, 0 -,cc ,8,9 80,8 0,

5 FLANGE CODE INLET OUTLET Model code example for a single pump WP 0 B 1 B 008 R NA 1 N = Type WP - Pump = Series 0-00 = Design revision B - nd release = # of sections 1 - Single = Seal material B - Buna = Displacement per section (See table below) = Rotation R - Clockwise L - Counter clockwise = Mounting flange = Drive shaft NA = Portings 1 - G/8 + G/8 BSPP 1 - M18 x 1, + M1 x 1, 11 = Valve options N - None At CCW rotation inlet and outlet are reversed. Code Displ. Rated pressure Intermitt. Maxi. speed Mini. speed Dimensions Weight P l P ll A B C (approx.) [bar] [bar] [min -1 ] [min -1 ] [mm] [mm] [mm] kg 008-0,8cc ,1, 0,1 0, 01-1,cc ,8, 1,8 0, 01-1,cc ,,, 0, 00 -,0cc 0 0 0,,1, 0, 0 -,cc ,,9, 0,80 0 -,cc ,,, 0,8 08 -,8cc ,8 8,9,8 0,8 0 -,cc ,9,0,9 0, ,8cc ,0 1,0,0 0, 0 -,cc ,8,9 80,8 0,

6 FLANGE CODE INLET OUTLET Model code example for a single pump WP 0 B 1 B 008 R QA 1 N = Type WP - Pump = Series 0-00 = Design revision B - nd release = # of sections 1 - Single = Seal material B - Buna = Displacement per section (See table below) = Rotation R - Clockwise L - Counter clockwise = Mounting flange = Drive shaft QA = Portings 1 - G/8 + G/8 BSPP 1 - M18 x 1, + M1 x 1, 11 = Valve options N - None At CCW rotation inlet and outlet are reversed. Code Displ. Rated pressure Intermitt. Maxi. speed Mini. speed Dimensions Weight P l P ll A B C (approx.) [bar] [bar] [min -1 ] [min -1 ] [mm] [mm] [mm] kg 008-0,8cc ,1, 0,1 0,8 01-1,cc ,8, 1,8 0, 01-1,cc ,,, 0, 00 -,0cc 0 0 0,,1, 0, 0 -,cc ,,9, 0,8 0 -,cc ,,, 0, ,8cc ,8 8,9,8 0,8 0 -,cc ,9,0,9 0,8 08 -,8cc ,0 1,0,0 0,89 0 -,cc ,8,9 80,8 0,

7 EFFICIENCES, TOTAL, MECHANICAL, VOLUMETRIC OVERALL EFFICIENCY WB1-1.-*-*-*-*-N-N VOLUMETRIC EFFICIENCY WB1-1.-*-*-*-*-N-N MECHANICAL EFFICIENCY WB1-1.-*-*-*-*-N-N OVERALL EFFICIENCY WB1-.-*-*-*-*-N-N MECHANICAL EFFICIENCY AVERAGE ± % AT C, cst. WB1-.-*-*-*-*-N-N VOLUMETRIC EFFICIENCY WB1-.-*-*-*-*-N-N OVERALL EFFICIENCY WB1-.8-*-*-*-*-N-N 1 bar SPEED (rpm ) MECHANICAL EFFICIENCY WB1-.8-*-*-*-*-N-N 1 bar SPEED (rpm ) VOLUMETRIC EFFICIENCY WB1-.8-*-*-*-*-N-N 1 bar SPEED (rpm )

8 PRODUCT RANGE HE Powerpacks 1//8 VDC 0.. kw and 0. kw AC modular power packs HE Box Powerpacks 1//8 VDC modular powerpacks in weatherproof boxes Pressure Switches -, connecting/disconnecting W Hydraulic pumps 0, -,0 cc bar W00 Hydraulic pumps 0,8, cc W Hydraulic pumps / motors 1 cc bar W0 Hydraulic pumps / motors 1 cc/section bar Calma The new quiet pumps, -, cc/section WQ0 The quiet pumps - cc/section WP0X Hydraulic pumps 1-1 cc/section bar Concentric Rockford Corp. 1th Street ROCKFORD, IL 110 USA Tel: Fax: Concentric Skanes AB Box SE-80 SK. FAGERHULT Sweden Tel: +- 0 Fax: Concentric Hof GmbH Postfach 10 D-01 HOF Germany Tel: Fax: Concentric Suzhou Co. Ltd. Dongjing Industrial Park 9 Dong Fu Lu SIP, Suzhou Jiangsu China 11 Tel Fax W100 Hydraulic pumps / motors 19-0 cc/section bar F1 FERRA Heavy duty pumps 1-1 cc/section bar F1 FERRA Heavy duty pumps 19-0 cc/section bar F0/F0 (LS) Hydraulic pumps / motors 11 cc/section bar GPA Internal Gear pumps 1, cc/section bar GC Hydraulic pumps / motors 1,0 11, cc/section bar D Hydraulic pumps,8,9 cc/section 0 bar H Hydraulic pumps 9,8 9, cc/section 0 bar II-Stage Hydraulic pumps,,8 cc/section bar Rotary Flow Dividers,8 1, cc/section 00 bar Transmission pumps Concentric is an innovator in flow control and fluid power, supplying proprietary systems and components for trucks, buses and industrial vehicles, worldwide. With 1,1 employees and yearly sales exceeding 1, million Swedish Kronor, Concentric AB is listed on the Stockholm Stock Exchange ( Concentric will not accept responsibility for any catalog errors and reserves the right to modify its products without prior notice. This also applies to products already ordered, provided that such modifications can be made without affecting technical specifications. All trademarks in this material are properties of their respective owners.

HIGH PRESSURE GEAR PUMP WQ900 SUPER QUIET & LOW PULSATION

HIGH PRESSURE GEAR PUMP WQ900 SUPER QUIET & LOW PULSATION HIGH PRESSURE GEAR PUMP WQ0 SUPER QUIET & LOW PULSATION Concentric AB Innovation in Hydraulics THE POWER OF THE WQ0 A SERIES Concentric is one of the world s leading manufacturers of hydraulic pumps. In

More information

HIGH PRESSURE GEAR PUMP W1500

HIGH PRESSURE GEAR PUMP W1500 HIGH PRESSURE GEAR PUMP W1500 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE W1500 A SERIES Haldex Hydraulics is one of the world s leading

More information

TWO STAGE HIGH/LOW HYDRAULIC PUMPS

TWO STAGE HIGH/LOW HYDRAULIC PUMPS TWO STAGE HIGH/LOW HYDRAULIC PUMPS Concentric AB Innovation in Hydraulics PERFORMANCE CURVES at 3600 RPM, with 300SSU Oil 2 2 DIMENSIONAL DRAWINGS GC Series A B C 1.25.125 1.50.62.55.5000.4997 1.7815 1.7800

More information

FP12 FERRA SERIES HEAVY DUTY GEAR PUMP

FP12 FERRA SERIES HEAVY DUTY GEAR PUMP FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures

More information

ROTARY GEAR FLOW DIVIDERS

ROTARY GEAR FLOW DIVIDERS ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic

More information

HIGH PRESSURE GEAR MOTOR WM900

HIGH PRESSURE GEAR MOTOR WM900 HIGH PRESSURE GEAR MOTOR WM9 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE WM9 A SERIES Haldex Hydraulicss is one of the world s leading manufacturers

More information

Commercial Shearing (Pty) Ltd P3-P11-P17

Commercial Shearing (Pty) Ltd P3-P11-P17 Commercial Shearing (Pty) Ltd P3-P11-P17 HYDRAULIC PUMPS P3 HYDRAULIC PUMPS Superior Performance. High Efficiency. High Pressure Operation. The Advantage At One Glance UP TO 4000 PSI/276 BAR CONTINUOUS

More information

Innovation. in Flow Control and Fluid Power TECHNOLOGY + INNOVATION = SUSTAINABILITY

Innovation. in Flow Control and Fluid Power TECHNOLOGY + INNOVATION = SUSTAINABILITY Innovation in Flow Control and Fluid Power TECHNOLOGY + INNOVATION = SUSTAINABILITY Concentric AB Market Driven Technology Concentric is a global company specializing in fluid dynamics and fluid power

More information

HYDRAULIC FAN DRIVE SYSTEMS

HYDRAULIC FAN DRIVE SYSTEMS HYDRAULIC FAN DRIVE SYSTEMS Concentric AB Innovation in Hydraulics Concentric Hydraulic Fan Drives The demand for increased energy savings, reduced emissions and reduced noise in vehicles is requiring

More information

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of

More information

W900 SERIES HYDRAULIC PUMP

W900 SERIES HYDRAULIC PUMP W900 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide W900 Hydraulic Gear Pump. PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI).

More information

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB

More information

High Pressure Gear Pumps KP 0

High Pressure Gear Pumps KP 0 High Pressure Gear Pumps KP 0 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)23 92/935-0 fax +49(0)23 92/935 209 mail info@kracht.eu web www.kracht.eu Construction According to its design,

More information

PUMP AND MOTOR DIVISION

PUMP AND MOTOR DIVISION INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation

More information

IPH Catalog High-pressure internal gear pumps

IPH Catalog High-pressure internal gear pumps Voith Turbo IPH Catalog High-pressure internal gear pumps Benefits that impress Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines around the world. Sophisticated

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE rueninghaus Hydromatik Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar RE 9008/03.97 RE 9008/03.97

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

VIKING HYDRAULIC GEAR PUMPS & MOTORS

VIKING HYDRAULIC GEAR PUMPS & MOTORS SERIES GP-04, -05, -07, -10, -14 Section 341.4 Page 341.4.1 Issue B OPERATING RANGE: GP Pumps (Cast Iron, Lip-Sealed) Displacements No. 24 Flow Range GPM 0.06 to 190 M 3 /Hr 0.011 to 43 Pressure PSI to

More information

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.1 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm Features Very short control times Low noise Mounting

More information

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G MOTORS M HYDRULIC MOTORS T E C H N I C L C T L O G Fixed displaced axial piston motors POCLIN HYDRULICS Displacement cm³/rev [in³/rev.] M M1 M2 M3 From 7,7 [.43] to 17,84 [1.9] From 9,8 [.55] to 2,31 [1.24]

More information

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Back to Content DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Publ. 2 - EN1702 - A 01 / 99 / 2500 / FB Replaces : CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

Fixed Displacement Motor A4FM

Fixed Displacement Motor A4FM Brueninghaus Hydromatik Series 3, for open and closed circuits axial piston - swashplate design Sizes 22 56 Nominal pressure 400 bar Peak pressure 450 bar RE 900/2.95 RE 900/2.95 replaces 0.90 Fixed displacement

More information

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact

More information

High Pressure Gear Pumps KP 5

High Pressure Gear Pumps KP 5 High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

High Speed Hydraulic Motors. Catalog HY /NA

High Speed Hydraulic Motors. Catalog HY /NA High Speed Hydraulic Motors Catalog HY13-20-0-001/NA 341 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range of

More information

High Pressure Gear Pumps KP2/KP3

High Pressure Gear Pumps KP2/KP3 High Pressure Gear Pumps KP2/KP3 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)23 92/935-0 fax +49(0)23 92/935 209 mail info@kracht.eu web www.kracht.eu Construction 1 5 6 2 9 8 4 7 3 1

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, 02 T A Replaces: MVP 01 T A Modification from former edition Variable displacement axial piston pumps, DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) for open circuit

More information

HYDAC Compact Power Units CA

HYDAC Compact Power Units CA 1007 HYDAC Compact Power Units CA Up to 250 bar Up to 12.6 l/min Suitable for: Short-term operation S2 Intermittent operation S3 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL For short-term operation S2 or intermittent

More information

VIKING BUILT DOUBLE PUMPS

VIKING BUILT DOUBLE PUMPS Like getting two pumps in one! SP-1470-C VIKING BUILT DOUBLE PUMPS Viking double pumps are ideally suited to many applications in the industrial and mobile markets. Two independent pumping units are operated

More information

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits with housing and distributor cover in aluminium. The displacement is continuously variable by means

More information

Radial piston pumps type R and RG

Radial piston pumps type R and RG Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power

More information

Rickmeier Solutions. Gear pumps for superior Lubrication

Rickmeier Solutions. Gear pumps for superior Lubrication Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for

More information

SNM2 SEM2 Gear Motors Technical Information

SNM2 SEM2 Gear Motors Technical Information SNM2 SEM2 Gear Motors Technical Information Gear Pumps and Motors General Products Sauer-Sundstrand Gear Pump and Motor Features Worldwide sales and service capabilities from the industry leader is part

More information

4. Vane Motors. Vane Motors 4-1. Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Weight. Mounting. Series. (Kg)

4. Vane Motors. Vane Motors 4-1. Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Weight. Mounting. Series. (Kg) Vane Motors 4. Vane Motors Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Mounting Weight (Kg) Remarks Page M5F 300 25.0 Special (Fan Drive) 17.5 Fan drive Optional braking valve 4-4 M5

More information

Introduction. GP-F25 - A pressure balanced gear pump with displacments from 1.22 to 3.86 Cu. In/Rev. with Cast Iron end Plates

Introduction. GP-F25 - A pressure balanced gear pump with displacments from 1.22 to 3.86 Cu. In/Rev. with Cast Iron end Plates Introduction Dynamic Fluid Components, Inc. present their extended range of Fixed Displacement, Pressure Balanced, Hydraulic Gear Pumps. These products are manufactured in accordance with the requirements

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Fixed displacement vane pumps

Fixed displacement vane pumps Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double

More information

CATALOGUE HYDRAULIC PUMPS. TAON ApS Tlf.:

CATALOGUE HYDRAULIC PUMPS. TAON ApS Tlf.: CATALOGUE HYDRAULIC PUMPS TAON ApS Tlf.: +45 24488480 E-mail: info@taon.dk www.taon-hydraulic.com Catalogue Hydraulic pumps Table of contents Piston pumps... 3 Variable piston pump... 3 A10V(S)O... 3 A4VSO...

More information

OFFLINE SERIES GLOBAL STANDARD COOLER

OFFLINE SERIES GLOBAL STANDARD COOLER OFFLINE SERIES GLOBAL STANDARD COOLER OIL-TO-AIR COOLING SYSTEMS WITH AC-MOTOR AND PUMP Product information AKG-Line is a standard line of products from the market leader in high performance aluminium

More information

QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems

QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system

More information

V Series AXIAL PISTON PUMP ORDER CODE

V Series AXIAL PISTON PUMP ORDER CODE V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 10 D X A 1001 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Max. Displacement (cm 3 /n): 15, 18, 23,

More information

GEAR PUMPS. from 500 to 4000 RPM

GEAR PUMPS. from 500 to 4000 RPM Displacement Pressure Speed from 4,00 to 31,00 ccm up to 310 bar from 500 to 4000 PM GEA PUMPS TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMET TABE... 3 FOMUAS USED FO

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

Axial Piston Variable Displacement Pump A2VK

Axial Piston Variable Displacement Pump A2VK Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Variable Displacement Pump A2VK RE 94001/07.04 1/12

More information

HPV SERIES AXIAL PISTON PUMPS

HPV SERIES AXIAL PISTON PUMPS INDEX COMPENSATED VOLUMETRIC THEORETICAL FLOW@ MODEL MAXIMUM CONTINUOUS FLANGE PAGES DISPLACEMENT 17 RPM SERIES MOUNTING.88 CU. IN./REV. 6.67 GPM HPV-6B35 30 PSI SAE A 2-BOLT* 9-15 1.26 CU. IN./REV. 9.55

More information

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01 SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426

More information

Mobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement

Mobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4

More information

OML and OMM Orbital motors. Technical Information

OML and OMM Orbital motors. Technical Information and OMM Orbital motors Technical Information and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital motors

More information

Rexroth Hydraulics. Vane pumps, direct controlled Type PV7...A RE 10 520/10.97

Rexroth Hydraulics. Vane pumps, direct controlled Type PV7...A RE 10 520/10.97 RE 1 52/1.97 Replaces: 12.95 Vane pumps, direct controlled Type PV7...A Nominal sizes 1 to 25 Series 1X Maximum operating pressure 1 bar Displacements from 1 to 25 cm 3 H/A 4617/95 Type PV7-1X/..RA1MA-...

More information

Circular pumps BFP. Low noise emission. Built-in bell housing High vol. efficiency. Gerotor principle Good suction performance

Circular pumps BFP. Low noise emission. Built-in bell housing High vol. efficiency. Gerotor principle Good suction performance Circular pumps FP Low noise emission uilt-in bell housing High vol. efficiency Gerotor principle Good suction performance Not susceptible to contamination DE370001 12/2015 page 1 / 7 ühler Technologies

More information

Advantages and characteristics of the new radial piston pump RKP-II compared to the previous RKP design

Advantages and characteristics of the new radial piston pump RKP-II compared to the previous RKP design Product Information Changeover from RKP to RKP-II Advantages and characteristics of the new radial piston pump RKP-II compared to the previous RKP design The newly developed 2 nd generation radial piston

More information

PowrFlow HPV Series Axial Piston Pumps

PowrFlow HPV Series Axial Piston Pumps PowrFlow HPV Series Axial Piston Pumps HPV SERIES AXIAL PISTON PUMPS RELIABLE POWER FOR ANY HYDRAULIC SYSTEM Product Description What Makes PowrFlow HPV Series Axial Piston Pumps Your Best Buy? Variable

More information

ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04

ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04 SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In

More information

Uniquely designed and engineered specifically for the pulp and paper industry.

Uniquely designed and engineered specifically for the pulp and paper industry. Universal SPU2 Series Uniquely designed and engineered specifically for the pulp and paper industry. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing

More information

Fixed displacement vane pumps

Fixed displacement vane pumps Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double

More information

DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series

DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series Publ. 2 - EN1700 - A 01 / 02 / 3000 / FB Replace : 2 - EN 157 - B L13-21700 - 1 CONTENTS - M3* AND M4* SERIES GENERAL General characteristics...

More information

OMP, OMR, OMH and OMEW Hydraulic Motor A wide range of hydraulic motors

OMP, OMR, OMH and OMEW Hydraulic Motor A wide range of hydraulic motors , OMR, OMH and OMEW A wide range of hydraulic motors Motorer.TIF A WIDE RANGE OF HYDRAULIC MOTORS Sauer-Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can

More information

Variable displacement axial piston pump type V30Z

Variable displacement axial piston pump type V30Z Variable displacement axial piston pump type V30Z Twin pump (back-to-back) for open circuit Operating pressure p max Displacement V max = 420 bar (6000 psi) = 2x115 ccm/rev See also: Variable displacement

More information

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7 Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables

More information

Axial Piston Fixed Motor AA2FM (A2FM)

Axial Piston Fixed Motor AA2FM (A2FM) Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FM (2FM) R 91001/03.08 1/36 Replaces: 07.05 Technical data sheet Series 6 Sizes

More information

Series PVP Variable Volume Piston Pumps

Series PVP Variable Volume Piston Pumps Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference

More information

A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711

A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711 A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.

More information

Pump-Transfer Cooler Filtration Unit UKF

Pump-Transfer Cooler Filtration Unit UKF Pump-Transfer Cooler Filtration Unit UKF Symbol General The UKF unit is a compact, easy-to-install system for offline filtration cooling circuits. It consists of a low-noise feed pump, a filter and a plate

More information

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109

Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 INDEX Description Page Delta Power Rotary Flow Divider, Positive Displacement (Application Data) 36 P Series, Equal Flow Two Sections 39 P Series, Equal Flow Multi-Sections 40 PM Series, Equal Flow Multi-Sections

More information

OFFLINE SERIES GLOBAL STANDARD COOLER. AKG 07/2011 (changes and errors expected)

OFFLINE SERIES GLOBAL STANDARD COOLER. AKG 07/2011 (changes and errors expected) OFFLINE SERIES GLOBAL STANDARD COOLER AKG 07/011 (changes and errors expected) OIL-to-AIR COOLING SYSTEMS Product Information AKG Offline Series, based on AKG Cool-Line Series, is a standard line of products

More information

bar clockwise or anticlockwise (looking at the drive shaft) Hydraulic connection SAE flange fittings (see paragraph 24)

bar clockwise or anticlockwise (looking at the drive shaft) Hydraulic connection SAE flange fittings (see paragraph 24) 16 100/112 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open

More information

Hydraulic Pumps TABLE OF CONTENTS

Hydraulic Pumps TABLE OF CONTENTS Hydraulic Pumps TABLE OF CONTENTS HYDRAULIC PUMPS.009 to 9.85 in 3 /rev. The range includes F0 and F1 all aluminium gear pumps, as well as our standard F10, F20 and available are all cast iron HI/LO pumps

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPL4046 PVP are variable displacement axial piston pumps for high pressure operation,

More information

HPV-02. Variable Pump for closed loop circuit

HPV-02. Variable Pump for closed loop circuit HPV-02 Variable Pump for closed loop circuit We move the world. Hydraulic Components + Electronic Components from Linde this means total Vehicle Management through the complete Linde System. Linde the

More information

15/40/80CN Series Medium Pressure Filters

15/40/80CN Series Medium Pressure Filters 1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)

More information

VIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.

VIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635. Page 635.1 Issue B Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Model H8124A Operating 1: Series 8124A Nominal Flow Temp. 2 Viscosity (GPM) 15-200 (M 3 /hr.) 3.4-45 (PSI) (Bar) To 200 PSI To 14

More information

HYDRAULIC FAN DRIVE SYSTEMS

HYDRAULIC FAN DRIVE SYSTEMS HYDRAULIC FAN DRIVE SYSTEMS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide 2 Haldex Hydraulic Fan Drives The demand for increased energy savings, reduced emissions

More information

PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions

More information

Power Units / Systems

Power Units / Systems Vickers Power Units / Systems Integrated Motor Pump MP, MP22, MP45, MP75 & MP92 kw, 20 hp to 92 kw, 125 hp This edition of the Integrated Motor Pump brochure includes the following pump series: Piston

More information

Positive Displacement BLOWERS. For Bulk Transport Vehicles

Positive Displacement BLOWERS. For Bulk Transport Vehicles Positive Displacement BLOWERS For Bulk Transport Vehicles Positive Displacement Blowers and Exhausters Type, 610 RBTM & 613 RBTM RBT Positive Displacement Blowers were first introduced in 1965 to meet

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information

Selecting an air motor for your application

Selecting an air motor for your application Selecting an air motor for your application Are you looking for a suitable motor for your construction? The following guide will help you to avoid annoying mistakes which could drive up running costs later.

More information

Piston Pumps. PVE Piston Pumps. Vickers

Piston Pumps. PVE Piston Pumps. Vickers Vickers Piston Pumps PVE Piston Pumps PVE12 Variable Displacement Single Pump PVE19 / PVE21 Variable Displacement Single & Thru-Drive Pumps PVE4* 25V Integrated Models GB C 223 A.1 Table of Contents Introduction.................................................................................................

More information

Internal gear pump PGF Series 2X and 3X

Internal gear pump PGF Series 2X and 3X Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise

More information

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi

More information

Compact Medium-pressure Vane Pump

Compact Medium-pressure Vane Pump Compact Medium-pressure Vane Pump Features The straight vane type structure realizes compact and lightweight design which brings greater cost effectiveness. These vane pumps with a maximum pressure of

More information

Air Cooler Industry AC-LN 8-14 MI with integrated frequency inverter

Air Cooler Industry AC-LN 8-14 MI with integrated frequency inverter Air Cooler Industry AC-LN 8-14 MI with integrated frequency inverter Symbol General The AC-LN MI air cooler series can be used in all areas where either oil or water-glycol has to be cooled with air. The

More information

TMT, TMTU and TMT FL Orbital Motors. Technical Information

TMT, TMTU and TMT FL Orbital Motors. Technical Information TMT, TMTU and TMT FL Orbital Motors Technical Information A Wide Range of Orbital Motors A WIDE RANGE OF ORBITAL MOTORS F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital

More information

Flow divider (flow distributor), type TQ

Flow divider (flow distributor), type TQ Flow divider (flow distributor), type TQ Pressure p max = 0 bar Flow Q CN max = 00 lpm Share ratio = :. General Task Flow dividers type TQ are self-regulating valves, which largely irrespective of the

More information

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft

More information

Compressor Lubrication

Compressor Lubrication Compressor Lubrication Lubricants for air compressors There are five types of compressors in common use: Reciprocating Rotary vane Pump or drip lubricated Oil flooded Rotary screw Pump or drip lubricated

More information

Axial Piston Fixed Pump AA2FO (A2FO)

Axial Piston Fixed Pump AA2FO (A2FO) Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump AA2FO (A2FO) RA 91401/03.08 1/28 Replaces: 07.05 Technical data sheet eries 6 izes

More information

P1/PD Series Medium Pressure Axial Piston Pumps

P1/PD Series Medium Pressure Axial Piston Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Variable Displacement Catalog HY28-2665-01/P1/EN Effective: ugust 1,

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device

More information

GoTo Europe Focused Delivery Program. Product Overview Hydraulics

GoTo Europe Focused Delivery Program. Product Overview Hydraulics GoTo Europe Focused Delivery Program Product Overview Hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have become an important

More information

AXIAL PISTON MOTORS SERIES 20

AXIAL PISTON MOTORS SERIES 20 AXIAL PISTON MOTORS SERIES 20 AXIAL PISTON PUMPS SERIES 20 TANDEM OF AXIAL PISTON PUMPS SERIES 20 Page: 2/24 CONTENTS AXIAL PISTON PUMPS SERIES 20.. 3 GENERAL DESCRIPTIONS.. 3 FEATURES... 4 TECHNICAL DATA..

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4

More information