676 AIR TOOLS 678. Drills Sanders Belt sanders Grinders Angle grinders - cutters Polisher...
|
|
- Gwen Pearson
- 7 years ago
- Views:
Transcription
1 AIR TOOLS 678 Impact wrenches Rachets Screwdrivers Drills Sanders Belt sanders Grinders Angle grinders cutters Polisher
2 POWER TOOLS 14 POWER TOOLS 711 Chisel hammer Saws Other tools and accessories Air line accessory Glue gun Heat gun Cordless impact wrench
3 IMPACT WRENCHES A COMPREHENSIVE RANGE SUITED TO YOUR NEEDS 3/8" 1/2" USE 3/4" 1" INTENSIVE USE NJ.3000F NS.3000F NK.3000F NM.1000F2 NJ.2000F2 NS.1800F2 NS.1500F2 NK.2000F2 NJ.1300F2 NK.1000F2 NM.1010LF2 NJ.1400F NS.1010F2 OCCASIONAL USE 678
4 Power tools 14 IMPACT WRENCH THE BEST UNFASTENING TOOL IMPACT WRENCHES ARE TOOLS DESIGNED TO UNSCREW WITH A HAMMERING SYSTEM POWER OF AN IMPACT WRENCH CHANGES ACCORDING TO: Type of assembly: Air line: Accessories: 679
5 IMPACT SYSTEMS TWIN HAMMER: USE INTENSIVE USE JUMBO: DOUBLE HAMMER: SYSTEMS NOT CHOSEN BY FACOM SINGLE HAMMER: PIN CLUTCH: OCCASIONAL USE 680
6 Power tools 14 TITANIUM IMPACT WRENCH UP TO 30% MORE POWERFUL 1700 NM FOR THE NS.3000F WRENCH! TWICE AS RELIABLE THAN OTHER IMPACT WRENCHES! NEW MONOBLOC MOTOR For our complete range of impact wrenches, see p
7 Impact wrenches 3/8" titanium impact wrench L [mm] H [mm] [kg] NJ.3000F 66 3/8" composite impact wrench L [mm] H [mm] [kg] NJ.2000F2 3/8" aluminum impact wrench L [mm] H [mm] [kg] NJ.1300F
8 Power tools 14 3/8" impact wrench L [mm] H [mm] [g] NJ.1400F 3/8" impact wrenches F NJ.3000F NJ.2000F2 NJ.1300F2 NJ.1400F Free speed (rpm) Maximum torque (Nm) Blows per minute Weight (kg) 1,3 1,3 1,2 0,4 Power/Intensity of use rate* Length (mm) Average air consumption (l/min) Structure Titanium Composite Aluminium Aluminium Hose diameter 3/8" 3/8" 3/8" 3/8" Air inlet 1/4" 1/4" 1/4" 1/4" Vibration level (m/s 2 ) 3,06 4,3 4 7,6 Noise level db(a) 93,8 92,7 94,7 87,4 *This ratio is used to help you choose the tool most suited to your needs. The value 5 is used to indicate the tool is the most powerful in its category, and can be used on intensive work stations (such as tire change stations). OCCASIONAL USE INTENSIVE USE 683
9 1/2" titanium compact impact wrench L [mm] H [mm] [kg] NS.2000F 66 1/2" titanium impact wrench L [mm] H [mm] [kg] NS.3000F 1/2" composite compact impact wrench L [mm] H [mm] [kg] NS.1500F
10 Power tools 14 1/2" composite impact wrench L [mm] H [mm] [kg] NS.1800F2 1/2" aluminum impact wrench L [mm] H [mm] [kg] NS.1010F2 1/2" impact wrenches Compact F NS.3000F NS.1800F2 NS.1010F2 NS.2000F NS.1500F2 Free speed (rpm) Maximum torque (Nm) Blows per minute Weight (kg) 2,1 2,2 2,6 1,4 1,3 Power/Intensity of use rate* Length (mm) Average air consumption (l/min) Structure Titanium Composite Aluminium Titanium Composite Hose diameter 3/8" 3/8" 3/8" 3/8" 3/8" Air inlet 1/4" 1/4" 1/4" 1/4" 1/4" Vibration level (m/s 2 ) 4,91 10,2 8,4 3,06 8,2 Noise level db(a) 94, ,8 92,9 *This ratio is used to help you choose the tool most suited to your needs. The value 5 is used to indicate the tool is the most powerful in its category, and can be used on intensive work stations (such as tire change stations). OCCASIONAL USE INTENSIVE USE 685
11 3/4" titanium impact wrench L [mm] H [mm] [kg] NK.3000F 3/4" composite impact wrench L [mm] H [mm] [kg] NK.2000F2 3/4" aluminum impact wrench L [mm] H [mm] [kg] NK.1000F2 F NK.3000F NK.2000F2 NK.1000F2 Free speed (rpm) Maximum torque (Nm) Number of pulses Weight (kg) 3,8 3,9 5,6 Power/Intensity of use rate* Length (mm) Average air consumption (l/min) Structure Titanium Composite Aluminium Hose diameter 1/2" 1/2" 1/2" Air inlet 3/8" 3/8" 3/8" Vibration level (m/s 2 ) 5,06 10,7 9,1 Noise level db(a) 97,8 99,1 98,4 *This ratio is used to help you choose the tool most suited to your needs. The value 5 is used to indicate the tool is the most powerful in its category, and can be used on intensive work stations (such as tire change stations). OCCASIONAL USE 3/4" impact wrenches INTENSIVE USE 686
12 Power tools 14 Longreach 1" impact wrench L [mm] H [mm] [kg] NM.1010LF2 1" impact wrench L [mm] H [mm] [kg] NM.1000F2 1" impact wrenches F NM.1010LF2 NM.1000F2 Free speed (rpm) Maximum torque (Nm) Blows per minute Weight (kg) 11 10,3 Power/Intensity of use rate* Length (mm) Average air consumption (l/min) Structure Aluminium Aluminium Hose diameter 3/4" 3/4" Tool fitting 1/2" 1/2" Vibration level (m/s 2 ) 15,2 16,7 Noise level db(a) ,4 *This ratio is used to help you choose the tool most suited to your needs. The value 5 is used to indicate the tool is the most powerful in its category, and can be used on intensive work stations (such as tire change stations). OCCASIONAL USE INTENSIVE USE 687
13 RATCHET The ultimate tool to increase your productivity! : 1/4" 3/8" 1/2" Ratchets VR.R127 1/4" palm control ratchet 688
14 Power tools 14 VR.R227 1/4" mini ratchet VR.J154 3/8" palm control ratchet VR.J254 3/8" mini ratchet 689
15 VR.J3108 Standard 3/8" ratchet VR.S3136 Standard 1/2" ratchet RATCHETS 1/4" palm 1/4" mini 3/8" palm 3/8" mini 3/8" std 1/2" HD F VR.R127 VR.R227 VR.J154 VR.J254 VR.J3108 VR.S3136 Square (L) 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" Head type Sealed Sealed Sealed Sealed Sealed Sealed Max torque (Nm) Free speed (Rpm) Length Weight (kg) 0,5 0,6 0,5 0,6 1,2 1,2 Head thickness 29, , ,7 51,7 Air consumption (l/min) Structure Composite Composite Composite Composite Composite Composite Hose diameter 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" Air inlet 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" Vibration level (m/s 2 ) 3,8 1,8 3,9 3,5 4,6 9,1 Noise level db(a)
16 Power tools 14 Screwdrivers Reversible pistol screwdriver L [mm] H [mm] [kg] V.620RF 44 Reversible straight screwdriver d [mm] L [mm] [kg] V.610RF 44 SCREWDRIVER SPECIFICATIONS F V.620RF V.610RF Free speed (rpm) Maximum working torque (N.m) Weight (kg) 1,2 1,1 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,
17 Drills V.103MF Drill 10 mm with selflocking chuck Drill 13 mm with selflocking chuck L [mm] H [mm] [kg] V.97F DRILL SPECIFICATIONS F V.103MF V.97F Chuck capacity Free speed (rpm) Motor power (kw) 0,45 0,45 Weight (kg) 1,45 1,9 Length (mm) Air consumption (l/min) Air inlet thread (") 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,
18 Power tools 14 Sanders Orbital palm sander 152 mm 5 mm orbit d [mm] L [mm] H [mm] [g] V.252F Orbital palm sander 152 m 2.5 mm orbit d [mm] L [mm] H [mm] [g] V.256F "Twohand" orbital sander 152 mm 10 mm orbit L [mm] H [mm] [kg] V.258F H L d 693
19 "Twohand" orbital sander 152 mm 5 mm orbit d [mm] L [mm] H [mm] [kg] V.254F Jitterbug sander 95 x 170 mm 8 holes comfortable thermallyinsulated body. L [mm] H [mm] [kg] V.260F VIBRATING SANDER SPECIFICATIONS F V.256F V.252F V.254F V.258F V.260F Orbit (mm) 2, Pad dimension (mm) x 170 Free speed (rpm) Weight (kg) 0,84 0,84 1,3 2,25 2,1 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" 1/4" 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,2 6,2 6,2 6,
20 Power tools 14 MATERIAL REMOVAL KIT INCREDIBLY PRODUCTIVE, INSTANTLY REMOVES STICKERS, RUST, PAINT ETC V.500FWBF11 V.500F V.500FWBF22 V.500FWBC11 V.500FWBC22 V.500FA11 V.500FA22 V.500FRE V.500FWBPRE V.500F Multifunction brush 695
21 Belt sanders Belt sander 10 x 330 mm L [mm] H [mm] [g] V.402F High capacity belt sander 20 x 520 mm L [mm] H [mm] [kg] V.403F BELT SANDER SPECIFICATIONS F V.402F V.403F Free speed (rpm) Weight (kg) 0,8 1,1 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,
22 Power tools 14 Pistolgrip 127 mm rotary disc sander d [mm] L [mm] H [mm] [kg] V.401F Vertical rotary disc sander diam. 178 mm L [mm] H [mm] [kg] V.410F Angle sander diameter 178 mm d [mm] L [mm] H [mm] [kg] V.411F CUTTER SPECIFICATIONS F V.401F V.410F V.411F Pad dimension (mm) Free speed (rpm) Weight (kg) 1,2 2,6 2,25 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,2 6,
23 Grinders Straight die grinder 6 mm collet front exhaust L [mm] H [mm] [g] V.445F Straight die grinder 6 mm collet L [mm] H [mm] [g] V.345F GRINDER SPECIFICATIONS F V.445F V.345F V.347F Free speed (rpm) Collet or shank diameter (mm) Weight (kg) 0,9 0,6 0,7 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,2 6,
24 Power tools 14 Angle die grinder 6 mm collet L [mm] H [mm] [g] V.347F VM Grinders on stand 6 mm Model Size [in] d [mm] H [mm] Maximum RPM [mm] VM.600 A.4 6 VM VM VM VM VM VM.600 VM.604 VM.610 VM
25 Angle grinders Angle grinder cutter diam. 100 mm Angle grinder cutter diam. 125 mm d [mm] L [mm] H [mm] [kg] V.462F d [mm] L [mm] H [mm] [kg] V.472F Angle grinder cutter diam. 125 mm composite L [mm] H [mm] [kg] V.582F Vertical grinder cutter diam. 180 mm d [mm] L [mm] H [mm] [kg] V.482F 700
26 Power tools 14 Vertical grinder cutter diam. 230 mm d [mm] L [mm] [kg] V.492F GRINDER/CUTTER SPECIFICATIONS F V.462F V.472F V.582F V.482F V.492F Free speed (rpm) Diameter Weight (kg) 1,7 1, ,4 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" 1/4" 1/2" 1/2" Hose inner Ø (mm) Working pressure (bar) 6,2 6,2 6,2 6,2 6,2 Angle polisher Angle polisher diam. 178 mm d [mm] L [mm] H [mm] [kg] V.902F 701
27 Chisel hammer Power chisel with hexagonal shank L [mm] H [mm] [kg] V.320FH V.321AH Chisel hammer set Saws Sabre saw cm blades. L [mm] H [mm] [g] V.770F 702
28 Power tools 14 Production sabre saw L [mm] H [mm] [g] V.775F SAW SPECIFICATIONS F V.770F V.775F Strokes/min Weight (kg) 0,8 0,96 Length (mm) Average air consumption (l/min) Air inlet thread (") 1/4" 1/4" Hose inner Ø (mm) Working pressure (bar) 6,2 6,2 Other tools and accessories Nibbler L [mm] H [mm] [g] V.850F 703
29 Windshield cutter L [mm] H [mm] [kg] CAD.P300F Windshield cutter blades CAD.P300F CAD.P300F1 CAD.P300F2 CAD.P300F3 CAD.P300F4 CAD.P300F5 CAD.P300F6 CAD.P300F7 CAD.P300F8 CAD.P300F9 CAD.P300F10 CAD.P300F11 CAD.P300F12 L [mm] WINDSCREEN CUTTER F CAD.P300F1 CAD.P300F2 CAD.P300F3 CAD.P300F4 CAD.P300F5 CAD.P300F6 CAD.P300F7 CAD.P300F8 CAD.P300F9 CAD.P300F10 CAD.P300F11 CAD.P300F12 Description Hook blade 63 mm Curved blade 30 mm Hook blade 36 mm Long blade 57 mm Hook blade 18 mm Straight blade 35 mm Straight angled blade 35 mm Hook blade 90 mm Long flat blade 90 mm Hook blade 25 mm Thin straight blade 35 mm Scraper blade 45 mm Characteristics CAD.P300 Oscillations per minute Weight (kg) 1,21 Length (mm) 208 Air consumption (l/min) 120 Air inlet thread (") 1/4 Hose inner Ø (mm) 10 Working pressure (bar) 6,2 F4 F1 F9 F2 F3 CAD.P300 F5 F10 F11 F12 F7 F8 F
30 Power tools 14 Caulking gun 50 x 215 mm cartridge L [mm] H [mm] [kg] V.801F Spot weld drill remover without slipping. L [mm] H [mm] [kg] V.781F Pneumatic riveter d [mm] L [mm] H [mm] [kg] Y.135F 705
31 Scriber A standard tip. L [mm] H [mm] [g] V.820F Pneumatic needle scaler L [mm] H [mm] [kg] V.352F Blow gun L [mm] H [mm] [g] V.999A
32 Power tools 14 N.709 Air hose reel Network connection N.580 1/4" filterregulatorlubricator BSP Gas gauge. N.581 3/8" filterregulatorlubricator BSP Gas gauge. N.582 1/2" filterregulatorlubricator BSP Gas gauge. N.600 Set of 4 hose connections 707
33 N.644 Polyurethane spiral extension N.633 1/4" pretefloned tapered male threaded bit BSP Gas N.650 3/8" pretefloned tapered male threaded bit BSP Gas N.651 1/2" pretefloned tapered male threaded bit BSP Gas 708
34 Power tools 14 N.631 Fitting for 8 mm hose N.632 Fitting for 10 mm hose N.630 Female tapped snap adapter 3/8" gas BSP. N.820 Female tapped snap adapter 1/2" gas BSP
35 N.641 PVC hose diameter 8 x 14 mm + bits N.643 PVC hose diameter 10 x 16 mm + bits N.841 PVC Diflex hose diameter 10 x 16 mm + bits N.842 PVC hose diameter 16 x 22 mm + bits 710
36 Power tools Power tools 14 E.900A Glue gun E.2005 Heat gun 711
37 Power tools CL2.C1913 CORDLESS IMPACT WRENCH LITHIUMION PROFESSIONAL PERFORMANCE! 18 Volt 3.3 AH battery POWERFUL Volts NiCd NiMH Time LIGHTWEIGHT DURABLE PRACTICAL 712
38 Power tools Power tools 14 CL2.C1913 "heavy use productivity" impact wrench pack CL2.C19 "occasional use " impact wrench pack CL2.C1913D Battery impact wrench CL2.BA19 LithiumIon battery Provides a constant level of power until the battery is completely discharged. leaving it on the charger. CL2.CH1419 Battery charger 713
CHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
More informationSPECIAL OFFER AUTUMN 2015
SPECIAL OFFER AUTUMN 2015 Impact wrenches CP7732 Art nr 8941077320 Ultra Compact & Powerful 1/2 Best power to weight ratio: 610 Nm Steel front cover & Aluminum body One hand operation forward reverse by
More informationSPECIAL OFFER. Vehicle Service. spring 2014. People. Passion. Performance. Tools. Valid to 20140630
SPECIAL OFFER spring 2014 Valid to 20140630 Vehicle Service Tools People. Passion. Performance. CP7729 ³ 8, 563 Nm, 1,2 kg Art nr 894 107 7290 CP7739 ½, 610 Nm, 1,2 kg Art nr 894 107 7390 CP7749Q ½, 983
More informationVibration and Noise Information
Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST
More informationPNEUMATIC TOOLS. Couplers Art. No. 00699 The wall fitting will determine which of the displayed couplers will be most suitable for receiving
Couplers Art. No. 00699 The wall fitting will determine which of the displayed couplers will be most suitable for receiving the air hose. It is important to note that there are numerous types of couplers
More informationCORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
More informationPower Tools for Professionals
Power Tools for Professionals 35 th ANNIVERSARY SPECIAL Offer v alid un 31.12. 2 til 014 2014 1979 1984 1986 1988 1999 2003 S L O O T R E W O P F 35 YEARS O 2014 THE 35 YEAR ANNIVERSARY MODELS Limited
More informationABRASIVES HAND TOOLS MATERIAL HANDLING LIFTING EQUIPMENT
AIR TOOLS CATALOGUE 2013 2014 Locations JET products are available from a broad distribution network throughout Canada. We support this network with our own system of warehouses in Vancouver, Edmonton,
More informationDRILLS MODEL DESCRIPTION PART NO. M.R.P.
DRILLS GBM 6 6mm High Speed Drill - 4000 rpm 0 601145 107 3225 GBM 10 10 mm Heavy Duty High Torque Drill 0 601 135 090 4200 New! GBM 10 RE 10 mm Heavy Duty High Torque Drill, Reversible 0 601 4735KO 4750
More informationCORDLESS TOOLS. People. Passion. Performance. WWW.CP-CORDLESS.COM FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS
CORDLESS TOOLS FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS People. Passion. Performance. WWW.CP-CORDLESS.COM Cordless Tools - Powered by Chicago Pneumatic 3 NO LIMITS Can you fix it? Can you reach it?
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationCatalogue. electric- and cordless power tools. Products for sheet metal processing. Machine Tools / Power Tools Laser Technology / Electronics
Catalogue electric- and cordless power tools Products for sheet metal processing Machine Tools / Power Tools Laser Technology / Electronics Innovative tools Contents: 2 Page Page Page 4 8 9 New battery
More informationBosch Power Tools for DIY
www.bosch-do-it.com Bosch Power Tools for DIY Full Range Catalogue for 2010 New Compact Generation Universal Expert The new Compact Generation Easy, Universal or Expert the perfect impact drill for everyone
More informationPRISLISTE - SPERO NORGE AS Plus Line - 2015 RE : (compact) AU- 2A Dato : Des. 31, 2014
3 02-211- 719BMF 19PC 1/4" Dr. Socket Set w/swivel Universal Ratchet Wrench-6PT-Metric (4,4.5,5,5.5,6,7,8,9,10,11,12,13,14mm) 857,71 3 02-311- 722BMF 22PC 3/8" Dr. Socket Set w/swivel Universal Ratchet
More informationAIR COMPRESSORS come with an inflating pistol and gauge for tyre inflation as well as additional accessories for use around the home.
Today MICHELIN is developing new consumer products which not only support motorists needs but go further to provide assistance with general care and maintenance needs in and around the home. The MICHELIN
More informationDynafile. Air-Powered Abrasive Belt Machine. Featuring New Composite Quick-Change Housing Cover!
Dynafile Reorder No. D02.02 The Most Recognized Shape In Portable Abrasive Belt Tools! Air-Powered Abrasive Belt Machine Grind Deburr Blend Clean Finish Polish Featuring New Composite Quick-Change Housing
More informationMAKE OF AUTOMOBILE: NUMBER : 076/0800901 DATE : 2008-12-08 Copyright Prins Autogassystemen B.V. 2008 VERSION NR : 2008-10-24 B
MAKE OF AUTOMOBILE: HONDA TYPE: CIVIC PISTON DISPLACEMENT: 1800 NUMBER OF VALVES: 16 ENGINE NUMBER: R18A TYPE VSI INJECTOR ( COLOR ) ORANGE MODEL YEAR: 2008 ENGINE SET NUMBER 348/0250200.07 NUMBER : 076/0800901
More informationcompressed air conditioning accessories. one stop shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools compressed air conditioning and accessories one stop shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
More informationPermanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationI N T E R N A L S E C U R I T Y
I N T E R N A L S E C U R I T Y E Q U I P M E N T Founded by Walter E. Wisbey in the late 1940ʼs as specialists in surgical instrument repair, the company rapidly developed a comprehensive engineering
More information5-Other arc welding WELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationAUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology
More informationSmall Battery Drive. For orthopaedic trauma applications.
Small Battery Drive. For orthopaedic trauma applications. Ergonomic, lightweight design Compatible with a wide variety of attachments Variable speed trigger with instant reverse and oscillation Small
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists
More informationPads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationPRO Series. Piston compressor range. Compressed air at your service
PRO Series Piston compressor range Compressed air at your service 2 3 Join the ABAC advantage Since 1980, ABAC offers the right mix of flexibility and experience for the industrial, professional and DIY
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationPRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS
PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING INTRODUCTION THE
More informationModular and Flexible. We want to make it easier for you! Innovative Riveting System. with blind rivet adapter BR 20. with blind rivet adapter BR 50
Modular and Flexible Innovative Riveting System 800 bar with blind rivet adapter BR 20 We want to make it easier for you! with blind rivet adapter BR 50 Engineered and Designed by with blind rivet nut
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationMultiFlex Swivel Connector. Magic in the air
MultiFlex Swivel Connector Magic in the air Cramped spaces, heavy air hoses? Working with pneumatic assembly tools in cramped, awkward spaces? Vehicle interiors, for instance, can be hard to access and
More informationP33 Series Modular Drills Redefining Productivity Through Innovation
Redefining Productivity Through Innovation High Performance Ergonomics P33 Series Non-ube Modular Drills Ingersoll-Rand is yet again redefining productivity through innovation. This time we ve married
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationTools for Switch Machines, Switch Layout Hardware and Related Equipment
Switch Machines and Associated Ansaldo STS USA Tools for Switch Machines, Switch Layout Hardware and Related ASTS USA offers a complete line of generic and special-purpose tools to expedite repairs and
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationFACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationPneumatic Air Tools. www.atatools.ie
Pneumatic Air Tools www.atatools.ie ATA PNEUMATIC POWER TOOLS Contents High Speed Straight Pencil Grinders 1 Engraver Pen 2 High Speed Straight Grinders 3-5 Anti-Vibration Die Grinder 6 High Power Straight
More informationpower to create! Product catalog Product catalog www.ferm.com
power to create! Product catalog Product catalog Discover the new FERM through our new interactive packaging design with integrated QR-Codes, FERM product videos, the FERM app and the website. FERM offers
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationSIZE: 10" WATER PUMP PLIER, SIIRTOLEUKAPIHDIT 10" S IKH47A 6" LONG NOSE PLIER, KÄRKIPIHDIT 6" S IKH47G 6" DIAGONAL PLIER SIVULEIKKURIT 6" S IKH47D
IKH1500/IKH1501 OSAT JR02 3PC PLIER SET SIZE: 10" WATER PUMP PLIER, SIIRTOLEUKAPIHDIT 10" S IKH47A 6" LONG NOSE PLIER, KÄRKIPIHDIT 6" S IKH47G 6" DIAGONAL PLIER SIVULEIKKURIT 6" S IKH47D JR04 JR05 16PC
More informationHand Crank Generator (9 May 05) Converting a Portable Cordless Drill to a Hand Crank DC Generator
Converting a Portable Cordless Drill to a Hand Crank DC Generator The unit is light weight (2.5 lb), portable, low cost ($10-$20) and can be used to recharge single cell batteries at from 1-3.5 amps. It
More informationEQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning
www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon Saint Petersburg 4895 34 th Street North (727) 528-1588 EQUIPMENT LIST Your Partner in the Planning for all Your
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationAssembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More informationSDS PLUS 4 Claw (4 Cutting Edges) SDS-Plus
MASONRY DRILL BITS SDS-Plus Rotary Hammer with SDS chuck or SDS adapter 5/32"x6" to 1"x10" SDS-Plus Masonry Drill s are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationHow To Use A Balancing Arm
Accessories for ergonomic workplaces Reliability Productivity Ergonomics Ecology Be demanding Don t be satisfied with the maximum Perfection is in your hands Naturally innovative Fiam accessories. A valuable
More informationZAPPY 3 OWNER S MANUAL. Read this manual completely before riding your Electric ZAPPY 3.
ZAPPY 3 OWNER S MANUAL Read this manual completely before riding your Electric ZAPPY 3. TECHNICAL INFORMATION Model No. : ZAPPY 3 Product size Type of motor Motor power Battery type Battery Charger Charging
More informationTUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationInstalling Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
More informationHow to Choose the Right Air Compressor
How to Choose the Right Air Compressor Air compressors have been around for well over 100 years and have as many uses as there are tools that use air. One reason for their popularity is because air as
More informationErgo-Pro Single Line Solar Station Installation and Operating Instructions
Rp 3/4 Ergo-Pro Single Line Solar Station Installation and Operating Instructions Item No Pump type 677.21.70 WILO ST 15/6 13 2 4 11 Technical Specifications Max. operating pressure: 6 bar Max. operating
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationDRAIN KING & PLUNGERS
DRAIN KING & PLUNGERS DRAIN KING DRAIN UNCLOGGERS 2-008 340 Complete kit Drain King 0ft. Hose Faucet Adapter 2 2-008 2-00 2-02 2-00 86 For -/2" to 3" Drains 2 2-02 50 For " to 2" Drains 2 2-04 750 For
More informationGTI VR6 Front Wheel Bearing DIY http://www.gtishrine.com
GTI VR6 Front Wheel Bearing DIY http://www.gtishrine.com This procedure covers replacing the front wheel bearings. Tools and Parts required: Wheel Bearing Puller w/ ABS adapter. Available for rent from
More informationAngle & General Line Drills
Angle & General Line Drills Michigan Pneumatic MP31DRST 1/4" Air Drill Reversible Features a forward/reverse switch and a twospeed trigger. Durable composite motor housing and planetary gear system with
More informationAutoSplitter Nut Splitter
AutoSplitter Nut Splitter Designed for Speed & Safety Designed for Operator Comfort Removes Corroded Nuts Fast Removes Frozen Nuts Safely Fits Tight Spaces Cuts through the Hardest Nuts Leading provider
More informationMachine needle shut-off nozzle type-a
Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationPOWER TOOLS. Brochure 2011. The Power in your hands
POWER TOOLS Brochure 2011 The Power in your hands BR 9,6E / BR 12E / BR 15E CORDLESS DRILL DRIVERS BUR2 15E / BUR2 18E CORDLESS COMBI DRILLS Voltage: 9.6 / 12 / 14.4 V Battery capacity: 1.5 Ah NiCd Keyless
More informationHose & Reel. Welding Reels. Arc Welding Gas Welding Cutting Operations
Hose & Reel P R O D U C T S Welding Reels Arc Welding Gas Welding Cutting Operations 2 Note to the designers & engineers. Welding Reels for Heavy Industry Hose & Reel Products hose reels for welding (Oxygen-acetylene
More informationDepending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes: EXTERNAL DIAMETER 27.
ASSEMBLY 1 - EPS V2 POWER UNIT (SOLUTION 5) 1.1 - POSITIONING INSIDE THE SEAT TUBE WITH ELASTIC SUPPORT IN THE SEAT BRACKET TUBE Depending on which elastic support you have you can secure the V2 power
More informationECO 80 PRODUCT DESCRIPTION FEATURES. Power output S1 100% Adjustable air nozzle. Liquid cooling. Minimalmengenschmierung MMS retrofit
A PRODUCT DESCRIPTION Power output S6 40% Power output S1 100% Rotation speed Diameter Spindlehousing Spindle interface 3.0 kw 2.5 kw to 40.000 rpm 80 mm Stainless steel HSK - E25 FEATURES Adjustable air
More informationHow To Launch A Rocket From A Formica
Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.
More informationErgonomical Polyurethane recoil hose
C Recoil PU Hose xx l/ sec 100% PUR -30 C - +60 C Ergonomical Polyurethane recoil hose Assembled in Denmark 2/4/6/8 m Features > > Straight ends of 150 mm / 500 mm > > Top quality PUR raw material 98 Shore
More informationInstallation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5
INSTALLATION GUIDE Installation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5 Take every precaution to make this installation a safe procedure. Make safety the number
More informationQuick change SDS converter for regular percussion power tools
Quick change SDS converter for regular percussion power tools This converter adapts regular percussion impact machines to receive SDS shank tools. Quick change of SDS shank tools through the axial sliding
More informationMKV Golf GTI Rear Brake Service - Replace Pads and Rotors
Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of
More informationJoplin Rebuild Instructions
Joplin Rebuild Instructions This is a step by step list of instruction on how to rebuild the Crankbrothers Joplin post. It may not always be required to completely tear-down the post to do the work needed
More informationRebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
More informationIndustrial Cutting Equipment. includes new Concrete Crusher
Industrial Cutting Equipment includes new Concrete Crusher LUKAS Industrial Cutting Equipment The demand for environmentally-friendly disposal and recycling of used or discarded products within highly
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationBattery Power Line. Battery-driven power tool system for orthopaedics and traumatology.
Battery Power Line. Battery-driven power tool system for orthopaedics and traumatology. High performance Excellent torque for drilling and reaming Precise cutting with Synthes saw blades Battery Power
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationTools. Acid Brushes. Utility Brushes. Brushes For Cleaning Copper Fittings. Brushes For Cleaning Copper Tubing G113 10/06/11
10/06/11 Acid Brushes G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe
More informationRIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationNew Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment
New Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment Included are the following: Personal information form Driver Back round Check Authorization
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationUNITOR VACUUM cleaners
UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationWaterjets. propulsors. courtesy of Austal
Waterjets The Rolls-Royce Kamewa waterjet range is the broadest in the business. Manufactured in aluminium and stainless steel, they are available in powers from kw to above 36MW. Using the latest design
More information