Pilot Operated Check Valves Model SV/SL (Series 4X)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Pilot Operated Check Valves Model SV/SL (Series 4X)"

Transcription

1 R 68/06.98 Size 0 to 0 Pilot Operated Check Valves Model SV/SL (Series ) 600 PSI (5 bar)... 5 GPM (550 L/min) R 68/06.98 Replaces: 05.9 Pilot operated check valve, with leak-free closure in checked direction Subplate mounting with connection dimensions to ISO 58-06, NFP T.5.M R and NSI 9. POC 06, (for subplates, see data sheet R 5 06) Threaded connections, for in-line mounting With or without external drain connection, as required Optional pilot poppet, for cushioned decompression and reduced hydraulic shock Various cracking pressure (see ordering code) K 5/6 Model SV 0 P.-/... Functional description, section, symbols Pilot operated check valves model SV and SL are poppet/seat type valves for leak-free closure. They allow free-flow ( to ) and are piloted open for reverse flow ( to ). These valves isolate hydraulic circuits to prevent actuator movement as a result of component leakage or line rupture. These pilot operated check valves consist of valve housing (), main poppet (), compression spring (), pilot piston (), and an optional decompression poppet assembly (5). Valve model SV (without external drain connection) Reverse free flow is possible from port to. In the checked condition, main poppet (), and decompression poppet (5) are seated by spring () and system pressure. When pilot pressure is applied to port, pilot piston () moves to the right. This signal opens the decompression poppet (5) first, followed by main poppet (). Fluid flows through the open decompression poppet and main poppet. This design permits rapid and smooth decompression of fluid. In order to assure reliable operation, a minimum pilot pressure is required to shift pilot piston (). Valve model SL... ( with external drain connection) In principle, function is the same as model SV. n additional external connection port, allows the annulus area of the pilot piston () to be drained separately. Pressure at port only acts upon effective area. (9) of pilot piston () which reduces the influence of downstream pressure. The decompression feature is also available for Model SL ; Model SV..P.-/... (internally drained, with decompression poppet option) Model SL..P.-/... (externally drained, without decompression poppet option) Symbols Model SV Model SL 6 rea rea 8 rea 9 rea /6

2 R 68/06.98 Ordering Code S * Internally drained (without drain port) Externally drained (with drain port) = V = L Subplate mounting Ordering NFP Subplates code interface available standard SE, NPT, SP 0 POC 06 /8" and /" 0 POC 08 /" and " 0 POC 0 -/" and -/" Threaded in-line connections Ordering NPT or SE code G (SP) 0 /" -8; /-6 5 /" -; -/6-0 " -6; -5/6-5 -/" -0; -5/8-0 -/" -; -/8- Subplate mounting Threaded connections = P = G Further details to be written in clear text Threaded connections no desig. = SP threaded ports = SE threaded ports no desig. = NR seals suitable for petroleum oils (HM, HL, HLP) V = FPM seals suitable for phosphate ester fluids (HFD-R) = Series 0 to 9 (0 to 9; externally interchangeable) Cracking pressure = see performance curves, p-q = with flow to, page = = = With decompression poppet = Without decompression poppet Technical Data (For application outside the parameters, please consult us!) General Size Weight (approx.) Subplate mounting lbs (kg).0 (.8) 0. (.). (.8) Threaded connections lbs (kg).6 (.).9 (5.).9 (5.).0 (0).0 (0) Mounting position Optional Direction of flow Free flow to ; to when piloted open Hydraulic Operating pressure PSI (bar) (5) Pilot control pressure range PSI (bar) (5... 5) Pilot volume Port in (cm ) 0.5 (.5) (0.8) (0.8).6 (9.).6 (9.) Port (only type SL) in (cm ) 0. (.0) (9.6) (9.6).068 (.5).068 (.5) Control areas rea in (cm ) 0.06 (.) 0.56 (.6) 0.56 (.6) 0.88 (5.) 0.88 (5.) (see rea in (cm ) 0.05 (0.) 0.09 (0.) 0.09 (0.) 0.06 (.) 0.06 (.) sectional drawing rea in (cm ) (.8).56 (0.).56 (0.).55 (6.6).55 (6.6) page ) rea in (cm ) 0. (0.9) 0.5 (.) 0.5 (.) 0.9 (.5) 0.9 (.5) Hydraulic fluid Petroleum oils (HM, HL, HLP) Phosphate ester fluids (HFD-R) Fluid NR seals F ( C)... 6 ( ) temperature range FPM seals F ( C)... 6 ( ) Viscosity range SUS (mm /s) ( ) Maximum degree of fluid contamination Class 8/5 according to ISO 06. Therefore, we recommend a filter with a minimum retention rate of ß 0 5. /6

3 Performance Curves, measured at ν = 90 SUS ( mm /s) and t = F (50 C) R 68/06.98 Pressure drop ( p) vs. flow (Q) curves Pressure drop ( p) vs. flow (Q) curves Subplate mounting Threaded connection (8) 00 (8) 00 () 50 Size 0 () 50 Size 0 Cracking pressure (0) 00 (0) 00 PSI (6) (6) (.5 bar) PSI () () ( bar) (8) (8) 90 PSI (6 bar) () () PSI (0 bar) (5) (50) (5) (00) (5) (50) (5) (50) (5) (00) (5) (50) (0) (0) (,5) (,5) Cracking 0 Size 0 0 Size 5 and 0 pressure (5) (5) PSI (,5) (,5) (.5 bar) (0) (0) PSI (,5) 0 (,5) 0 (5 bar) (5) PSI (5) 80 (.5 bar) (,5) 0 (,5) 0 5 PSI (0 bar) (00) (00) (00) (50) (00) (00) (00) (50) (6) () () (0) (8) (6) () () 0 (6) 0 00 Size 0 () 00 Size 5 and 0 Cracking () pressure PSI (0) (.5 bar) 0 (8) 0 PSI (6) (5 bar) PSI () 0 0 (8 bar) () 5 PSI (0 bar) (00) (00) (00) (00) (500) (550) (00) (00) (00) (00) (500) (550) Control pressure in PSI (bar) (0) (00) (80) (60) (0) (0) Pilot pressure vs. load pressure curves without decompression poppet Control pressure in PSI (bar) (0) (00) (80) (60) (0) (0) with decompression poppet Tolerance range Valve limit Main poppet Decompression poppet (60) (0) (80) (0) (00) (0) 600 (5) Load pressure in PSI (bar) (60) (0) (80) (0) (00) (0) 600 (5) Load pressure in PSI (bar) /6

4 R 68/06.98 Unit Dimensions: Subplate Mounting Valve, P : dimensions in inches (millimeters) H H 0.06 (.5) H 0.0 (5) L5 5 L L8 L 5 6 L L L6 L9 L0 L L L L Required surface finish of interface when mounting the valve without our subplate 0.000/.0 in 0.0/00 mm (R max ) Ø ( +0.0 ) 0 0 Ø 0.6 (6) Port for valve model "SL" (in valve model "SV" this port is plugged) Nameplate Locating pin O-rings Size 0 Ports and. mm x.6 mm Ports and 9.5 mm x.8 mm Size 0 Ports and 8. mm x.5 mm Ports and 9.5 mm x.8 mm Size 0 Ports and.5 mm x.5 mm Ports and 9.5 mm x.8 mm R-rings Size 0 Ports and.56 mm x. mm x.6 mm Ports and 9.8 mm x.5 mm x.8 mm Size 0 Ports and 8. mm x. mm x.5 mm Ports and 9.8 mm x.5 mm x.8 mm Size 0 Ports and.5 mm x.5 mm x.5 mm Ports and 9.8 mm x.5 mm x.8 mm 5 Valve with cracking pressure Model and (Dimension L) 6 Valve with cracking pressure Model and (Dimension L) 6) valve mounting holes for valve size SV / SL 0 Model Size L L L L L5 L6 L L8 L9 L (00.8) (5.5) (5.5) (8.8) () (.9) (8.5) (.) (5.8) SV (5) (.) (.) () (8) (60.) (.5) (.) (9.) (56.) (6.) (6.) () (.) (8.) (9) (6.) (6.5) (00.8) (5.5) (5.5) (8.8) () (.9) (8.5) (.) (5.8) (.5) SL (5) (.) (.) () (8) (60.) (.5) (.) (9.) (9.5) (56.) (6.) (6.) () (.) (8.) (9) (6.) (6.5) (59.5) Model Size L L L 5 H H H (.5) (.8) (8) (66.) () (58.8) (5) (9) (6) SV (0.6) (.5) (00) (9.) (6) () (0) () (55) (.6) (.) (6.) (8) (96.8) (5) (9.8) (85) (.5) (0) (.5) (.8) (8) (66.) () (58.8) (.9) (5) (9) (6) SL (0.6) (.5) (00) (9.) (6) () (6.) (0) () (55) (.6) (.) (6.) (8) (96.8) (5) (9.8) (.8) (85) (.5) (0) /6 Porting pattern to ISO 58-06, 08 or 0 NFP/NSI POC 06, POC 08 or POC 0 Subplates for Valve size 0: G 6/ (SE-8; /-6) Valve size 0: G / (SE-; -/6-), G / (SE-6; -5/6-) Valve size 0: G 5/ (SE-; -/8-) Valve mounting bolts for Valve size 0: ) /8"-6 x " UNC (M0 x 50) Tightening torque = 55 lb-ft (5 Nm) Valve size 0 : ) /8"-6 x -/" UNC (M0 x 0) Tightening torque = 55 lb-ft (5 Nm) Valve size 0: 6) /8"-6 x -/" UNC (M0 x 85) Tightening torque = 55 lb-ft (5 Nm) Socket head cap screws SE grade 8 or better. Subplates and valve mounting bolts must be ordered separately, see R 5 06

5 Unit Dimensions: Valve for Threaded Connections, G : dimensions in inches (millimeters) R 68/06.98 H H 0.06 (.5) L L 5 L 6 Ø ( +0.0 ) () L5 L L6 L8 L L0 Port for valve model "SL" (in valve model "SV" this port is plugged) Nameplate 5 Valve with cracking pressure or (Dimensions L) 6 Valve with cracking pressure or (Dimensions L) Valve mounting holes, diameter 0. in ( mm) L9 Ports & Ports & Model Size NPT or SE NPT or SE G (SP) G (SP) 0 /" -8; /-6 SV 5 /" -; -/6- and 0 " -6; -5/6- /" -; /6-0 SL 5 -/" -0; -5/8-0 -/" -; -/8- Model Size L L L L L5 L6 L L8 L9 L0 H H SV (00.8) (5.5) (5.5) (8.8) () (56.5) (0.5) (.5) (.5) (.) (8) (66.) (.) () () and 5; () (.) (.) (5) (8) (.5) () (50.5) (6) () (05) (9.) (9.) (68) () SL 5; (56.) (5.) (5.) () (.) (0) () (8) (9) (8) (0) (96.8) (8.) (85) (.5) 5/6

6 R 68/06.98 Notes: 6/6 Mannesmann Rexroth Corporation Rexroth Hydraulics Div., Industrial, 5 City Line Road, ethlehem, P 80- Tel. (60) Fax: (60) Rexroth Hydraulics Div., Mobile, 00 Old Mansfield Road, Wooster, OH Tel. (0) 6-00 Fax: (0) 6- ll rights reserved Subject to revision Printed in U.S..

Pressure Relief Valve, Direct Operated Model DBD (Series 1X)

Pressure Relief Valve, Direct Operated Model DBD (Series 1X) ressure Relief Valve, Direct Operated Model DBD (Series 1X) Sizes 6 to 30... 9150 SI (630 bar) 87 GM (330 L/min) RA 25 402/06.98 Replaces: 05.94 Direct operated, fast response pressure relief valve hree

More information

Check valve, pilot operated

Check valve, pilot operated Check valve, pilot operated RE 21460/08.11 Replaces: 07.05 1/8 Type SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page Features

More information

Pilot operated check valves, Types SV and SL...30B/ Huade América 1

Pilot operated check valves, Types SV and SL...30B/ Huade América 1 Pilot operated check valves, s SV and SL...30B/ Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated check valves, s SV and SL...30B/ size 10 to 30 up to 31.5 Pa up to 400L/min

More information

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011 Pilot Operated Cartridge Check Valves RJV-05 HA 5 8/0 Size 05 50 bar (600 PSI) 0 L/min (5. GPM) Replaces HA 5 0/0 Cartridge valve for manifold mounting and with subplate with subplate - enables direct

More information

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics.

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure Technical Information Pilot Operated Check Valve Series C5P General Description Series C5P pilot operated check valves have a similar design to the subplate mounted SVL series. The SAE flanges allow to

More information

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007 Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid

More information

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot

More information

Rexroth Hydraulics. Pressure relief valve, direct operated, Type DBD RE /03.98

Rexroth Hydraulics. Pressure relief valve, direct operated, Type DBD RE /03.98 RE 25 402/03.98 Replaces: 08.97 ressure relief valve, direct operated, ype DBD Nominal sizes 6 to 30 Series 1X Maximum operating pressure 630 bar Maximum flow 330 L/min H/A 5585/96 ype DBD 1X/ Contents

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03. Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power

More information

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE rueninghaus Hydromatik Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar RE 9008/03.97 RE 9008/03.97

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

Pressure relief valves type AGAM two stage, subplate mounting - ISO 6264 size 10, 20 and 32

Pressure relief valves type AGAM two stage, subplate mounting - ISO 6264 size 10, 20 and 32 www.atos.com Table C06619/E Pressure relief valves type AGAM two stage, subplate mounting ISO 6264 size 10, 20 and 32 1 MODEL CODE AGAM10/11...E AGAM20/.../V AGAM are two stage pressure relief valves with

More information

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid

More information

VJO1-04/M. Functional Description HA /2003. Check valve sandwich plates. Replaces HA /2000. up to 30 L/min. up to 320 bar Q max

VJO1-04/M. Functional Description HA /2003. Check valve sandwich plates. Replaces HA /2000. up to 30 L/min. up to 320 bar Q max Check valve sandwich plates VJO1-04/M HA 5012 1/2003 Size 04 p max up to 320 bar Q max up to 30 L/min Replaces HA 5012 1/2000 Sandwich plate design for use in vertical stacking assemblies Poppet design

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated Pressure relief valve, pilot operated RE 7/0.0 Replaces: 08.0 /8 Type DB. K Nominal sizes 6 and 0 Component series 4X Maximum operating pressure bar Maximum flow 60 l/min (NS6) 00 l/min (NS0) K478- Overview

More information

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES ABOUT THE SESSION This session deals with check valves, flow control valves, its functions, operations and application. INTRODUCTION Check Valve:

More information

Scavenging and Pressure Relief Valve Block SDVB

Scavenging and Pressure Relief Valve Block SDVB Brueninghaus Hydromatik Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block

More information

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings Pilot-operated Check Valves ERVE up to 350 bar up to 300 l/min Cartridge valves Connection housings 1. DESCRIPTION 1.1. GENERAL In accordance with DIN-ISO 1219, HYDAC pilot-operated check valves, type

More information

Proportional pressure relief valve with position feedback (Lvdt AC/AC)

Proportional pressure relief valve with position feedback (Lvdt AC/AC) Proportional pressure relief valve with position feedback (Lvdt AC/AC) RE 29150/07.05 1/10 Type DBETBX Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 2 bar Nominal flow rate Q nom

More information

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G MOTORS M HYDRULIC MOTORS T E C H N I C L C T L O G Fixed displaced axial piston motors POCLIN HYDRULICS Displacement cm³/rev [in³/rev.] M M1 M2 M3 From 7,7 [.43] to 17,84 [1.9] From 9,8 [.55] to 2,31 [1.24]

More information

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Check Valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 7 L/min (60 USgpm) EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E4 September, 007 - Check

More information

KDG3V-5/7/8, 10 Series

KDG3V-5/7/8, 10 Series Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5

More information

Pressure relief valves Size 6

Pressure relief valves Size 6 Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are

More information

Pilot Operated Check Valves

Pilot Operated Check Valves Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking

More information

p max 350 bar Q max 80 l/min

p max 350 bar Q max 80 l/min 83 230/215 ED DSE3J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 80 l/min MOUNTING INTERFACE OPERATING PRINCIPLE

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)

4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) 1/16 4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) RE 2984/1.9 Replaces: 1.5 Type 4WRL1...25 Sizes (N) 1, 16, 25 Unit series 3 Maximum

More information

Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage

Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage Type MHDBB and MHDBL RE 6461 Edition: 016-04 Frame sizes 16,, 3 Component series

More information

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8)

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8) THROTTLE MOULES - / 3 ( / 8, 3 / 8) THROTTLE AN CHECK MOULES TCG- / 3 ( / 8, 3 / 8) Gasket Specifications / Model Number esignation Up to MPa (363 PSI), 8 L/min (. U.S.GPM) Pub. EC-3 Used as pilot choke

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated ressure relief valve, pilot operated RE 80/10.0 Replaces: 0.0 1/0 ypes D and DW Sizes 10 to Component series Maximum operating pressure 0 bar Maximum flow 0 L/min H988 + H089 able of contents Contents

More information

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage

Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback RE 29163/07.05 1/12 Type DBEBE10Z Nominal size 10 Unit series 1X Maximum working pressure A, B,

More information

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE

VER03MG CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE VER03MG - PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE CONTINENTAL HYDRAULICS VER03MG PROPORTIONAL PRESSURE RELIEF VALVES WITH OBE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PRECISE VER03MG PROPORTIONAL

More information

Pressure reducing valve, direct operated, Type ZDR 6 D

Pressure reducing valve, direct operated, Type ZDR 6 D RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

Check & Load Control Valves

Check & Load Control Valves Overview The HYDAC range of direct and pilot operated check valves provide a broad selection of cartridge and inline products with operating pressure rating of up to 6 psi (4 bar). All valves have a one

More information

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY Republic/Manatrol Hydraulic and Pneumatic Control Valves Catalog HY14-3000/US FOR POSITION ONLY Republic/Manatrol Valves Hydraulic and Pneumatic Controls WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US

More information

2-way flow control valve Type 2FRM 6

2-way flow control valve Type 2FRM 6 RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D

More information

Pilot Operated Pressure Relief Valves Series R4V / R6V

Pilot Operated Pressure Relief Valves Series R4V / R6V Characteristics Series RV / R6V Pilot operated pressure relief valves series RV (DIN 230 Form D) and R6V (DIN 230 Form E) consist of a manually adjusted pilot stage and a seated type main stage. A vent

More information

DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30

DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30 85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08

More information

Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage

Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically

More information

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids 4/3-, 4/- and 3/ Directional Control Valves Model WE 6.. /E, Series 6X with wet pin C or DC solenoids Size 6 (D 03) up to 5100 SI (350 ar) up to 1 GM (80 L/min) R 3 178/06.98 R 3 178/08.99 Replaces: 06.98

More information

Manapak Sandwich Valves. General Description. Operation. Specifications. Features

Manapak Sandwich Valves. General Description. Operation. Specifications. Features Catalog HY14-252/US Technical Information Series PRDM General Description Series PRDM are direct operated pressure reducing valves that are used to regulate pressure in one area of a hydraulic circuit

More information

Proportional pressure relief valve

Proportional pressure relief valve Proportional pressure relief valve RE 29161/07.05 1/10 Type DBETX Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Nominal flow rate Q nom 1 l/min List of contents Contents Page

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

CHM /112 ED PILOT OPERATED CHECK VALVE SERIES 10. Q max 30 l/min MODULAR VERSION ISO (CETOP R02) p max 320 bar MOUNTING SURFACE

CHM /112 ED PILOT OPERATED CHECK VALVE SERIES 10. Q max 30 l/min MODULAR VERSION ISO (CETOP R02) p max 320 bar MOUNTING SURFACE 65 00/2 ED CHM2 ILO OERED CHECK VLVE SERIES 0 MODULR VERSION ISO 440-02 (CEO R02) p max 320 bar Q max 30 l/min MOUNING SURFCE OERING RINCILE ISO 440-02-0-0-05 (CEO 4.2-4-R02-320) he CHM2 valve is a hydraulically

More information

Chapter 6: Check Valves

Chapter 6: Check Valves Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV

More information

PILOT OPERATED CHECK VALVE - Series VC4V

PILOT OPERATED CHECK VALVE - Series VC4V PILOT OPERTED CHECK VLVE - Series VCV Veljan Pilot Operated Check Valves VCV are with pilot control for hydraulic unlockg. These are sprg-loaded poppet type valves. Mountg configuration of VCV are accordg

More information

Pressure relief valves type ARAM two stage, in line mounting - G 3/4" and G 1 1 /4" threaded ports

Pressure relief valves type ARAM two stage, in line mounting - G 3/4 and G 1 1 /4 threaded ports www.atos.com Table C04520/E Pressure relief valves type ARAM two stage, in line mounting G 3/4" and G 1 1 /4" threaded ports ARAM20/20...E ARAM32.../V ARAM are two stage pressure relief valves with balanced

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM

Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, 02 T A Replaces: MVP 01 T A Modification from former edition Variable displacement axial piston pumps, DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) for open circuit

More information

Open center control block in monoblock design MO-40

Open center control block in monoblock design MO-40 Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680

More information

Check/ Pilot Controlled Check Valves

Check/ Pilot Controlled Check Valves heck/ Pilot ontrolled heck s Type Graphic Symbols Max. Operating Pressure U.S.GPM.3. L/min Page In-Line (IT) 3 heck s (33) Right ngle (RT/RG) 3 98 Right ngle, langed onnection (R) Pilot Operated heck s

More information

Hydraulically pilot operated cartridge check valves Type RHC and RHCE without and with hydraulic pre-relief

Hydraulically pilot operated cartridge check valves Type RHC and RHCE without and with hydraulic pre-relief Hydraulically pilot operated cartridge check valves RHC and RHCE without and with hydraulic pre-relief Pressure p max = 700 bar Flow Q max = 0 lpm Symbols RHC RHCE 1. General These devices are designed

More information

Check Valves Valve locator

Check Valves Valve locator Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()

More information

Hydraulic Pressure Control Valves

Hydraulic Pressure Control Valves Webtec Products Limited Hydraulic Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. RV 020 Direct In-Line Relief Valve 1 RV 025 Relief Valve 3 RV 050 Relief

More information

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40 Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

More information

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min

Steering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device

More information

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1

Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 Pressure relief valve, type DB/DBW...50B/ (New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure relief valve, type DB/DBW...50B/ (New Series) Size 10 to 32 up to 35 MPa

More information

Chapter 5: Flow Valves

Chapter 5: Flow Valves Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free

More information

Hydro-electric pressure switch

Hydro-electric pressure switch Hydro-electric pressure switch RE 006/07.06 Replaces: 0.06 /8 ype HED 8 Component series X Maximum operating pressure 60 bar DINEN 608- : 99-0 IEC 6097- : 999-0 / Revision : 000-08 / Revision : 00-0 IEC

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...

More information

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits. Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)

More information

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

PRV-1PI Pilot operated pressure relief valve

PRV-1PI Pilot operated pressure relief valve Table of Content 1 Product Details... 2 1.1 Application... 2 1.2 Recommended Installation... 2 1.3 Function... 2 1.4 Features... 2 2 Technical Data... 3 3 Ordering Information... 3 3.1 Type Code... 3 4

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...

More information

Pressure relief valves

Pressure relief valves ressure relief valves RE 25 860/10.08 Replaces: RE 25 860/03.05 ressure relief valves 1/12 0 532... Valves for line connections Valves for block installation p max. = 350 bar Q max. = 120 l/min Contents

More information

Pressure relief and anti-cavitation valves (cartridge type) for mobile applications

Pressure relief and anti-cavitation valves (cartridge type) for mobile applications RE 64 642/09.98 RE 64 642/04.00 Replaces: 09.98 ressure relief and anti-cavitation valves (cartridge tpe) for mobile applications Nominal sizes 10 to 40 Maximum operating pressure 420 bar Maximum flow

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released M 2494 S Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 3525VQSV10* ***** ******* 20* Released 08 01 95 M 2494 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt

More information

DS /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 350 bar Q max 100 l/min OPERATING PRINCIPLE

DS /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 350 bar Q max 100 l/min OPERATING PRINCIPLE 41 150/116 ED DS3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO 4401-03 p max 350 bar Q max 100 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP 4.2-4-03-350)

More information

Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32

Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S Service Data Vickers Vane Pumps Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released 08 01 95 M 2497 S 10 SAE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin Bolt

More information

Piston Pumps. PVE Piston Pumps. Vickers

Piston Pumps. PVE Piston Pumps. Vickers Vickers Piston Pumps PVE Piston Pumps PVE12 Variable Displacement Single Pump PVE19 / PVE21 Variable Displacement Single & Thru-Drive Pumps PVE4* 25V Integrated Models GB C 223 A.1 Table of Contents Introduction.................................................................................................

More information

Ref.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777

Ref.nr.: www.hydroflex.nl. Oud-Beijerland Willem Beukelszstraat 1 3261 LV Oud-Beijerland Nederland Telefoon: +31(0)186 620 777 Ref.nr.: Oud-eijerland Willem eukelszstraat 1 3261 LV Oud-eijerland elefoon: +31(0)186 620 777 russel 1853 Strombeek - ever elgië elefoon: +32(0)2 267 41 14 elefoon: +31(0)10 283 90 00 Ordering s ypical

More information

Axial Piston Variable Displacement Pump A2VK

Axial Piston Variable Displacement Pump A2VK Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Variable Displacement Pump A2VK RE 94001/07.04 1/12

More information

Rexroth Hydraulics. Vane pumps, direct controlled Type PV7...A RE 10 520/10.97

Rexroth Hydraulics. Vane pumps, direct controlled Type PV7...A RE 10 520/10.97 RE 1 52/1.97 Replaces: 12.95 Vane pumps, direct controlled Type PV7...A Nominal sizes 1 to 25 Series 1X Maximum operating pressure 1 bar Displacements from 1 to 25 cm 3 H/A 4617/95 Type PV7-1X/..RA1MA-...

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working

More information

Axial Piston Fixed Motor AA2FM (A2FM)

Axial Piston Fixed Motor AA2FM (A2FM) Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FM (2FM) R 91001/03.08 1/36 Replaces: 07.05 Technical data sheet Series 6 Sizes

More information

FIK. Max Flow: 170 gpm (644 lpm) FIK In-Tank Filters. Working Pressures to: Rated Static Burst to: Flow Range to: Features.

FIK. Max Flow: 170 gpm (644 lpm) FIK In-Tank Filters. Working Pressures to: Rated Static Burst to: Flow Range to: Features. LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: psi kpa bar Rated Static Burst to: Flow Range to: psi kpa bar gpm lpm Features STYLE C STYLE D in-tank filters are economical,

More information

3/2- and 2/2-way cartridge valve type BVE

3/2- and 2/2-way cartridge valve type BVE 3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type

More information

PRE3G 81 250/212 ED PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS. Q max 40 l/min SERIES 12

PRE3G 81 250/212 ED PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS. Q max 40 l/min SERIES 12 81 250/212 ED PRE3G PILOT OPERATED PRESSURE CONTROL VALVE WITH PROPORTIONAL CONTROL AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 40 l/min MOUNTING SURFACE OPERATING

More information

Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity

Flow Control (and Check) Valves FG FCG -01/02/03/06/10. Specifications / Model Number Designation / Others. Min. Metred Flow Capacity low Control (and Check) Valves -//3/6/ Mounting Specifications / Model Number esignation / Others Specifications Max. Metred low Capacity () Min. Metred low Capacity () Max. Operating Pressure () Approx.

More information

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOGUE MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open centre and closed centre hydraulic systems. H Fitted with a main pressure relief

More information

Pressure Relief Valves HV, HVF

Pressure Relief Valves HV, HVF Pressure Relief Valves HV, HVF pilot operated Construction of the Pressure Relief Valves HV, HVF Symbol 1 Housing 2 Main Sliding Piston 3 Compression Spring 4 Pilot Sliding Piston 5 Compression Spring

More information

IPH Catalog High-pressure internal gear pumps

IPH Catalog High-pressure internal gear pumps Voith Turbo IPH Catalog High-pressure internal gear pumps Benefits that impress Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines around the world. Sophisticated

More information

Pressure relief valves

Pressure relief valves ressure relief valves RE 25 860/11.11 Replaces: RE 25 860/10.10 ressure relief valves 1/12 0 532... R 917... Valves for line connections Valves for block installation p max = 350 bar Q max = 120 l/min

More information

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.1 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm Features Very short control times Low noise Mounting

More information

Tank Top Return-Line Filter Pi 530

Tank Top Return-Line Filter Pi 530 Tank Top ReturnLine Filter Pi 530 Nominal size 35 and 50 1.Features High performance filters for modern hydraulic systems Provided for tank top installation Modular system Compact design Minimal pressure

More information

POPPET BLOCK CONTROL

POPPET BLOCK CONTROL POPPET BLOCK CONTROL MAINTENANCE AND SERVICE MANUAL USASI SCHEMATIC Normally closed, double three-way poppet valve, with open exhaust, manual and pilot actuated. POPPET BLOCK GAS OR OIL FLOW INTRODUCTION

More information

Pilot Operated Check Valves

Pilot Operated Check Valves Pilot Operated Check Valves The check valves in Fig.1 operate like a standard check valve but are able to have reverse flow when required. They are called Pilot to Open Check Valves since they are normally

More information

Line rupture protection valves type LB

Line rupture protection valves type LB Line rupture protection valves type LB Pressure p max Flow rate Q A max = 500 bar = 4... 160 lpm Screw-in versions Type LB...C In-line versions Type LB...G Type LB...F 1. General Line rupture protection

More information