Nickel-Plated Brass Pilot-Operated Check Valve/ Blocking Valve NPTF/Inch Series VBU, VBO

Size: px
Start display at page:

Download "Nickel-Plated Brass Pilot-Operated Check Valve/ Blocking Valve NPTF/Inch Series VBU, VBO"

Transcription

1 Automatic Valves Nickel-Plated Brass Pilot-Operated Check Valve/ Blocking Valve /Inch Series VBU, VBO Swivel Design : /32 OD Push-In Fitting Pilot Thread Type : 1/8, 1/4, 3/8 with Pro-Fit Reusable PTFE/Teflon Thread Seal Series VBU: unidirectional valves with operating pressure from 0.3 to 10 bar These unidirectional and bidirectional blocking valves have been realised in order to enable mounting directly on cylinders. The inner design of the blocking valves Series VBO and VBU allows a very high flow rate and reliable operation. These valves can be mounted directly also on distribution and fluid control blocks. Series VBO: bidirectional valves with operating pressure from 0 to 10 bar Direct mounting on cylinders or on distribution and fluid control blocks GENERAL DATA Construction poppet type Valve group unidirectional and bidirectional blocking valve (pilot-operated check and blocking valves, pilot connection /32 OD) Materials OT8 Nickel-Plated Brass Body, Buna-N seals, Teflon seal ring, internals brass Mounting by male thread Ports 1/8-1/4-3/8 Position in any position Operating temperature 0 C - 80 C (with dry air -20 C), 32 F - 17 F (dry air necessary down to - 4 F) Operating pressure VBU: 0,3-10 bar ( psi), VBO: 0-10 bar (0-14 psi) Nominal pressure 6 bar (87 psi) Nominal flow see graph Nominal diam. 1/8 ø, mm - 1/4 ø 8 mm - 3/8 ø 11 mm (flow orifice) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISO VG32. Once applied, the lubrication should never be interrupted. 188

2 Automatic Valves CODING EXAMPLE VB U 1/8 VB SERIES: VB U VERSIONS: U = unidirectional (pilot-operated check valve) O = bidirectional (blocking valve) 1/8 PORTS: 1/8 Sprint, compatible 1/4 Sprint, compatible 06 = 3/8 612 DIAGRAM OF THE PILOT PRESSURE (Pilot Connection /32 Tube OD) Pilot Pressure (PSI) Working Pressure (PSI) This diagram shows the relation between working pressure (Px) and pilot pressure required in order to operate the valve (Py). The opening pressure of the unidirectional valve is 0.3 bar (4.3 psi). 189

3 Automatic Valves FLOW DIAGRAMS OF UNIDIRECTIONAL AND BIDIRECTIONAL VALVES PSI Diagram for valves VBU and VBO with 1/8 ports. FLOW DIAGRAMS OF UNIDIRECTIONAL AND BIDIRECTIONAL VALVES PSI Diagram for valves VBU and VBO with 1/4 ports PSI Diagram for valves VBU and VBO with G3/8 ports. 190

4 Automatic Valves APPLICATION SCHEMES VBU = UNIDIRECTIONAL pilot-operated check valve VBO = BIDIRECTIONAL blocking valve Pilot Connection (/32 OD) Pilot Connection (/32 OD) Inlet Inlet Cylinder Port / Outlet Cylinder Port / Outlet 191

5 Automatic Valves Unidirectional blocking valve Mod. VBU and bidirectional blocking valve Mod. VBO Mod. Mod. A A B B DIMENSIONS (in inches) C F H L M N SW VBU 1/8 1/8 1/ VBU 1/4 1/4 1/ VBU 06 3/8 3/ DIMENSIONS (in inches) C F H L M N SW VBO 1/8 1/8 1/ VBO 1/4 1/4 1/ VBO 06 3/8 3/ Port 12 Pilot Connection /32 tube OD 192

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the

More information

2/2 NC, 3/2 NC, 2/2 NO, 3/2 NO

2/2 NC, 3/2 NC, 2/2 NO, 3/2 NO I JET JET series - Light with compact design - Low operating force and high response time - threaded connections or push-in fitting - Wide range of actuators and manual overrides for mounting panel (Original

More information

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

AIR-AIR PRESSURE MULTIPLIER (BOOSTER) AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally

More information

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series. Kor-Lok USA

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series.  Kor-Lok USA GENERAL & HIGH PRESSURE CHECK VALVES VC Series www.korlokusa.com Kor-Lok USA Features Valve Series Cracking Maximum Working VC3 General Purpose Fixed 3000 psig 207 bar VC6 High Fixed 6000 psig 413 bar

More information

Table of Contents. Accessories

Table of Contents. Accessories able of Contents Accessories...2-42 World Fittings....2-6 NPF/Inch Fittings...7-13 Metric Fittings....14-19 NPF Composite Fittings....20-23 Composite Metric Fittings...24-27 World Flow Controls... 28 Flow

More information

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics.

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure

General Size Mounting 2-port in-line flange SAE 61 Mounting Position Ambient Temprature Hydraulic Maximum Operating Pressure Technical Information Pilot Operated Check Valve Series C5P General Description Series C5P pilot operated check valves have a similar design to the subplate mounted SVL series. The SAE flanges allow to

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves Fluid Control Products A Constant Flow Of Ideas 2 Way General Purpose Solenoid Valves T A B L E O F C O N T E N T S Series General Description Pipe Body Material Page 8030 Low Pressure 3/8" - 3/" Brass

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, & other High Pressure Gases High Pressure Cryogenics Flammable Liquids & Gases

More information

Check & Load Control Valves

Check & Load Control Valves Overview The HYDAC range of direct and pilot operated check valves provide a broad selection of cartridge and inline products with operating pressure rating of up to 6 psi (4 bar). All valves have a one

More information

Hydraulically pilot operated cartridge check valves Type RHC and RHCE without and with hydraulic pre-relief

Hydraulically pilot operated cartridge check valves Type RHC and RHCE without and with hydraulic pre-relief Hydraulically pilot operated cartridge check valves RHC and RHCE without and with hydraulic pre-relief Pressure p max = 700 bar Flow Q max = 0 lpm Symbols RHC RHCE 1. General These devices are designed

More information

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings Pilot-operated Check Valves ERVE up to 350 bar up to 300 l/min Cartridge valves Connection housings 1. DESCRIPTION 1.1. GENERAL In accordance with DIN-ISO 1219, HYDAC pilot-operated check valves, type

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...

More information

7/16 Hex # /16 Hex. Nuts: 9/16 Hex x.09 Thick.19 Max. Panel Thickness. 7/16 Hex 1/8 NPT. #10-32 Female .50

7/16 Hex # /16 Hex. Nuts: 9/16 Hex x.09 Thick.19 Max. Panel Thickness. 7/16 Hex 1/8 NPT. #10-32 Female .50 ir Service to 150 psi -30 to + 250 F Miniature Max..94.28.16.06 Dia. 7/16 #10-32 ontrols both ways Knurled control knob Gasket included (G-10) rass construction una-n seal For infinite positioning of side

More information

Control blocks for two-hand start ZSB

Control blocks for two-hand start ZSB Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for

More information

THE BASICS OF PRESSURE REGULATORS

THE BASICS OF PRESSURE REGULATORS THE BASICS OF PRESSURE REGULATORS Contents The Basics of Pressure Regulators Material Fluid used (gas, liquid, toxic or flammable) Temperature Operating Pressures Flow Requirements Size & Weight Pressure

More information

Flow and check valves Non-return valves Series NR02. Brochure

Flow and check valves Non-return valves Series NR02. Brochure Flow and check valves Non-return valves Series NR0 Brochure Flow and check valves Non-return valves Series NR0 Qn = 300-680 l/min thread-in 3 Qn = 400-800 l/min thread-in 5 Qn = 480-5800 l/min installing

More information

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)

Check Valves. Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) Check Valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 7 L/min (60 USgpm) EATON Vickers Screw-In Cartridge Valves V-VLOV-MC00-E4 September, 007 - Check

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

Air Fuse In-Line Excess Flow Shut off Valve

Air Fuse In-Line Excess Flow Shut off Valve In-Line Excess Flow Shut off Valve 1 4" to 1 1 2" BSPP, NPT Assists in complying with safety regulations Tamper proof Compact and safe design Low pressure drop Automatically resets after failure correction

More information

Pilot Operated Check Valves Model SV/SL (Series 4X)

Pilot Operated Check Valves Model SV/SL (Series 4X) R 68/06.98 Size 0 to 0 Pilot Operated Check Valves Model SV/SL (Series ) 600 PSI (5 bar)... 5 GPM (550 L/min) R 68/06.98 Replaces: 05.9 Pilot operated check valve, with leak-free closure in checked direction

More information

Application Feature Valve Nominal Liquid Capacity R-22 (in tons)*

Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils Quick Select Guide Applications Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* Nominal Liquid Capacity R-410A (in tons)* Liquid Line

More information

Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9

Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9 Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS

TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings

More information

FIK. Max Flow: 170 gpm (644 lpm) FIK In-Tank Filters. Working Pressures to: Rated Static Burst to: Flow Range to: Features.

FIK. Max Flow: 170 gpm (644 lpm) FIK In-Tank Filters. Working Pressures to: Rated Static Burst to: Flow Range to: Features. LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: psi kpa bar Rated Static Burst to: Flow Range to: psi kpa bar gpm lpm Features STYLE C STYLE D in-tank filters are economical,

More information

DELTA SPRAY. Manual HVLP and Air Spray Guns. Fine Finish Quality with Proven Operator Comfort. Delta Spray Features and Benefits.

DELTA SPRAY. Manual HVLP and Air Spray Guns. Fine Finish Quality with Proven Operator Comfort. Delta Spray Features and Benefits. DELTA SPRAY Manual HVLP and Air Spray Guns Delta HVLP 239561 Delta Air Spray 239542 Fine Finish Quality with Proven Operator Comfort Delta Spray Features and Benefits Air Spray Outstanding finish quality

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated Pressure relief valve, pilot operated RE 7/0.0 Replaces: 08.0 /8 Type DB. K Nominal sizes 6 and 0 Component series 4X Maximum operating pressure bar Maximum flow 60 l/min (NS6) 00 l/min (NS0) K478- Overview

More information

SNM2 SEM2 Gear Motors Technical Information

SNM2 SEM2 Gear Motors Technical Information SNM2 SEM2 Gear Motors Technical Information Gear Pumps and Motors General Products Sauer-Sundstrand Gear Pump and Motor Features Worldwide sales and service capabilities from the industry leader is part

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.korlokusa.com Kor-Lok USA Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54

More information

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS A variety of hydraulic pumps is offered for various liquid output pressure up to 33,500 psi (2311 bar). Sprague Products pumps service water, oil and most corrosive

More information

Miniature electropilots U1

Miniature electropilots U1 Miniature electropilots Direct intervention electropilots with poppet valve system and cushioned bottom ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (3 ) separated

More information

Pressure Control for CO 2

Pressure Control for CO 2 Control for CO 2 A range of pressure control valves are available for gaseous CO 2 use in high flow applications. The CO 2 source can be a bulk liquid CO 2 storage tank, a high pressure tank or manifold

More information

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES ABOUT THE SESSION This session deals with check valves, flow control valves, its functions, operations and application. INTRODUCTION Check Valve:

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage

Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage Pressure relief valve, pilot-operated, with pulling function, seat design with pressure sequencing and pressure cut-off stage Type MHDBB and MHDBL RE 6461 Edition: 016-04 Frame sizes 16,, 3 Component series

More information

PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES

PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES PNEUMATIC CONTROL VALVES SERVICE AND MAINTENANCE PROCEDURES CONFIDENTIALITY NOTICE This document contains subject matter in which KMT Waterjet Systems has proprietary rights. Recipients of this document

More information

STANDARD STROKES Ø M 2 P 050 A 0200

STANDARD STROKES Ø M 2 P 050 A 0200 > Cylinders Series 6 CATALOGUE > Release 8.5 Cylinders Series 6 Aluminium profile New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperatures versions ø 32, 40,

More information

Check Valves up to 828 bar, 190 litres per minute

Check Valves up to 828 bar, 190 litres per minute Hydraulic and Pneumatic heck Valves up to 828 bar, 190 litres per minute Superior performance throughout the full operational range Features: 316L stainless steel Arctic Service options to -60 o Low cost

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

Accessories. Push-In Fittings - Nickel Plated Brass. N100 Series: Push-In Fittings made of Nickel Plated Brass for pneumatic and hydraulic use

Accessories. Push-In Fittings - Nickel Plated Brass. N100 Series: Push-In Fittings made of Nickel Plated Brass for pneumatic and hydraulic use Push-In Fittings - Nickel Plated Brass N100 Series: Push-In Fittings made of Nickel Plated Brass for pneumatic and hydraulic use - Body: Nickel-plated brass - ocking ring: Stainless Steel for - easy pipe

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

HP600 High-Pressure Needle Valve

HP600 High-Pressure Needle Valve HP600 High-Pressure Needle Valve OPERATING MANUAL This page intentionally left blank. SPECIFICATIONS: Operating Air Pressure: Fluid delivery pressure: HP600S: HP600L: Minimum Shot Size: HP600S: HP600L:

More information

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational

More information

Working Pressure up to 630 bar / 9135 PSI

Working Pressure up to 630 bar / 9135 PSI Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

4 Posiflow Proportional Solenoid Valves

4 Posiflow Proportional Solenoid Valves 4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,

More information

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011

RJV1-05 2(4) 1. Functional Description HA /2012. Pilot Operated Cartridge Check Valves. Replaces HA /2011 Pilot Operated Cartridge Check Valves RJV-05 HA 5 8/0 Size 05 50 bar (600 PSI) 0 L/min (5. GPM) Replaces HA 5 0/0 Cartridge valve for manifold mounting and with subplate with subplate - enables direct

More information

Techcon Systems TS5440 Microshot Needle Valve. User Guide

Techcon Systems TS5440 Microshot Needle Valve. User Guide Techcon Systems TS5440 Microshot Needle Valve User Guide CONTENTS Page number 1. Specifications 3 2. Unpacking and Inspection 4 3. Description 4 4. Theory of Operation 4 5. Setup Instructions 5 6. Typical

More information

FluidAqua Mobil FAM 5

FluidAqua Mobil FAM 5 FluidAqua Mobil FAM 5 Description The FluidAqua Mobil FAM 5 is designed for dewatering, degassing and filtering hydraulic and lubrication fluids. It operates on the principle of vacuum dewatering to eliminate

More information

Check valve, pilot operated

Check valve, pilot operated Check valve, pilot operated RE 21460/08.11 Replaces: 07.05 1/8 Type SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page Features

More information

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where

More information

The GDP has the following unit dimensions: 251 B X 235 L X 182 H (mm) (9.9 B X 9.3 L X 7.2 H (inches))

The GDP has the following unit dimensions: 251 B X 235 L X 182 H (mm) (9.9 B X 9.3 L X 7.2 H (inches)) MDE-4168A Global Dispensing Pump Model GDP- 090 Product Specification January 2003 Purpose The purpose of this specification is to provide technical data on the Blackmer Global Dispensing Pump (GDP) Model

More information

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY Republic/Manatrol Hydraulic and Pneumatic Control Valves Catalog HY14-3000/US FOR POSITION ONLY Republic/Manatrol Valves Hydraulic and Pneumatic Controls WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US

More information

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series inline Manifold mounting 5 stacking sub-base non plug-in 100 Manual operator 00 Sealed solenoid enclosure Armature 55 56 57

More information

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of

More information

Coreless Spin-on Filters

Coreless Spin-on Filters The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency,

More information

Service Instructions CH Series Check Valve

Service Instructions CH Series Check Valve Service Instructions CH Series Check Valve Contents Component Identification Tool Requirements Installation Testing Kit Contents Maintenance Troubleshooting The valve in this procedure is shown with Swagelok

More information

VIKING BUILT DOUBLE PUMPS

VIKING BUILT DOUBLE PUMPS Like getting two pumps in one! SP-1470-C VIKING BUILT DOUBLE PUMPS Viking double pumps are ideally suited to many applications in the industrial and mobile markets. Two independent pumping units are operated

More information

Chapter 5: Flow Valves

Chapter 5: Flow Valves Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free

More information

Air Filters and Filler Breathers series

Air Filters and Filler Breathers series ( ( ACCESSORIES Air Filters and Filler Breathers FA-3 / FB-1 / FB-2 / FT series Technical information TANK CONNECTION HOUSING MATERIAL FILTER MEDIA THREAD FLANGE WELDING STEEL PLASTICS FIBER CELLULOSE

More information

Fittings, Tubing & Nipples

Fittings, Tubing & Nipples s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and

More information

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power .55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard

More information

Ball Valves Subsea Series

Ball Valves Subsea Series Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Parker Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing

More information

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...

More information

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large

More information

Relief Valve Type: KALB - S

Relief Valve Type: KALB - S Relief Valve Type: KALB - S 13 14 15 5 6 4 8 11 1 3 11 10 2 9 7 12 Red: input pressure Yellow: outlet pressure Green: cylinder space 1 Housing 2 Valve seat 3 Valve piston 4 Set point screw 5 Pilot cone

More information

Pneumatic Accessories. ORIGA - simply the first

Pneumatic Accessories. ORIGA - simply the first Pneumatic Accessories ORIGA - simply the first Contents Description Page Description Page Check valves 3 21 In-line 4 Check valves, Series RV 4 Check valves, Series RV9 5 Shuttle valves, Series OR8 33

More information

Scavenging and Pressure Relief Valve Block SDVB

Scavenging and Pressure Relief Valve Block SDVB Brueninghaus Hydromatik Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

Air Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003

Air Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003 Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117

More information

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils

More information

Master Pneumatic. Introduction to Inline Lubrication

Master Pneumatic. Introduction to Inline Lubrication Introduction to Inline Lubrication What is the purpose of Inline Lubrication? Sentry Introduce atomized oil into the compressed air line to lubricate: Air Motors Cylinders Gears Sliding surfaces By doing

More information

20,000 psi (1379 bar) Needle and Ball Valves. Catalog 4190-HH/20K

20,000 psi (1379 bar) Needle and Ball Valves. Catalog 4190-HH/20K 20,000 psi (1379 bar) Needle and Ball Valves Catalog 4190-HH/20K 2 Contents Page 4... Introduction : Needle Valve Page 5... Design Features Page 6... Construction Page 7... Introduction : Ball Valve Page

More information

Complete Systems & Parts Automatic Oiler & Grease Bank

Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of

More information

[2012] STC Valve [FREQUENTLY ASKED QUESTIONS]

[2012] STC Valve [FREQUENTLY ASKED QUESTIONS] [2012] STC Valve [FREQUENTLY ASKED QUESTIONS] Table of Contents Technical Issues... 4 I have a Normally Open (NO) solenoid valve, but if I blow through the valve, it is closed. Did I receive a Normally

More information

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8)

THROTTLE MODULES TC1G-01 / 03 (1 / 8, 3 / 8) THROTTLE AND CHECK MODULES TC2G-01 / 03 (1 / 8, 3 / 8) THROTTLE MOULES - / 3 ( / 8, 3 / 8) THROTTLE AN CHECK MOULES TCG- / 3 ( / 8, 3 / 8) Gasket Specifications / Model Number esignation Up to MPa (363 PSI), 8 L/min (. U.S.GPM) Pub. EC-3 Used as pilot choke

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

Meter Units. Inch and Metric Threads. General. Application. How to Order 35470 R2 09/12

Meter Units. Inch and Metric Threads. General. Application. How to Order 35470 R2 09/12 Meter Units Inch and Metric Threads General Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system

More information

CONTENTS. TECHCON SYSTEMS TS1212 Disposable Pinch Tube Valve. User Guide

CONTENTS. TECHCON SYSTEMS TS1212 Disposable Pinch Tube Valve. User Guide TECHCON SYSTEMS TS Disposable Pinch Tube Valve User Guide CONTENTS Page number. Specifications.. Unpacking and inspection.. Description.. Theory of operation.. Setup instructions.. Typical system setup.

More information

% ^ ) 1.4 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 1.4 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power 4.4 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NPT / 3/ Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased ambient

More information

MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D. 1.65 to 9.5 mm

MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D. 1.65 to 9.5 mm MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D. 1.65 to 9.5 mm NC 2/2 Series 284 EATRES Solenoid valve suitable for cutting off the flow of a fluid by pinch or sterile, aseptic, physiological

More information

TY-FLO Needle Valves

TY-FLO Needle Valves Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle

More information

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40 Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

More information

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16" Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16 Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57 HEX-STUD made from heat treated alloy steel. In case of failure due to overload, the hexagon portion will remain in rod and can be easily removed Buna N rod wiper seal assures dry drip free piston rod

More information

Pressure relief valve, pilot operated

Pressure relief valve, pilot operated ressure relief valve, pilot operated RE 80/10.0 Replaces: 0.0 1/0 ypes D and DW Sizes 10 to Component series Maximum operating pressure 0 bar Maximum flow 0 L/min H988 + H089 able of contents Contents

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

excess flow control XVH Series Excess Flow Valve

excess flow control XVH Series Excess Flow Valve Excess Flow Valve Circle Seal Controls 2301 Wardlow Circle Corona, CA 92880 Phone (951) 270-6200 Fax (951) 270-6201 www.circlesealcontrols.com excess flow control Excess Flow Valves XVH Series Excess Flow

More information

Pressure relief valves type ARAM two stage, in line mounting - G 3/4" and G 1 1 /4" threaded ports

Pressure relief valves type ARAM two stage, in line mounting - G 3/4 and G 1 1 /4 threaded ports www.atos.com Table C04520/E Pressure relief valves type ARAM two stage, in line mounting G 3/4" and G 1 1 /4" threaded ports ARAM20/20...E ARAM32.../V ARAM are two stage pressure relief valves with balanced

More information

SELECTION, APPLICATION AND MAINTENANCE

SELECTION, APPLICATION AND MAINTENANCE DIESEL PROTECTION SYSTEMS D200 Spindle Type Automatic Engine Overspeed Air Intake Shut Down Valve (Including Manual, Oil and Air Pressure Shut Down Control Options) SELECTION, APPLICATION AND MAINTENANCE

More information

KMT H2O Jet Spare Parts Catalog

KMT H2O Jet Spare Parts Catalog KMT H2O Jet Spare Parts Catalog 2008 Reliable, High Precision Spare Parts Spare parts by KMT H2O Jet conform to the highest quality standards. They are designed for a quick and easy replacement of ultra

More information

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC 8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated

More information

Sterile Process Connection, Diaphragm Seals for Food, Biochemical and Pharmaceutical Industry Threaded Coupling Model

Sterile Process Connection, Diaphragm Seals for Food, Biochemical and Pharmaceutical Industry Threaded Coupling Model Diaphragm Seals Sterile Process Connection, Diaphragm Seals for Food, Biochemical and Pharmaceutical Industry Threaded Coupling Model 990.18... 990.21 WIKA Data Sheet DS 99.40 Applications T Food and beverage

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way

More information

Gas Turbine Valves. Gas Turbine Valves. International, Inc. Company ACIRCOR. DV4 Drain Valves. ASV134 Purge Valves

Gas Turbine Valves. Gas Turbine Valves. International, Inc. Company ACIRCOR. DV4 Drain Valves. ASV134 Purge Valves Valves Valves DV4 Drain Valves ASV134 Purge Valves DR5 Mk9 Back Pressure Maintaining Valve with pressure offset FV2 & 3 Fuel Flow Control Valves We design, machine, build and test all our products on one

More information