Installation Manual for WS WindSafe Roof-Top Rack System for Flat Roofs

Size: px
Start display at page:

Download "Installation Manual for WS WindSafe Roof-Top Rack System for Flat Roofs"

Transcription

1 Installation Manual for WS WindSafe Roof-Top Rack System for Flat Roofs (JBH5154_FotoFlexer) R:/Marketing/Product Pictures/WS Installation Manual Draft Disclaimer 2. General Rack Description 3. Tools 4. Example 5. Sample Drawing 6. Installation Instructions 7. Component Details 8. Tolerances 9. Examples

2 1. Disclaimer: The installer of each system and/or the contractor or developer of each project shall be responsible and liable for safe and proper installation of each system, and also to initiate, maintain and supervise all OSHA and safety programs and precautions for each project and project site, and to provide all required protection to prevent damage, injury, loss or death to any or all persons, property and work present or located on the project site. Schletter Inc. does not install any portion of its mounting systems and therefore will not have, and hereby specifically disclaims, any duty or responsibility for safe and proper installation of any mounting system or jobsite safety as to any jobsite where installation of any of its mounting systems occurs. Please follow the drawings, and report any issues or discrepancies to Schletter. 2. General Rack Description: The Flat-Roof WS System is designed and engineered for your PV-System and site location. The design and structural calculations of the rack determine the corresponding profiles and the required ballast that stabilize the roof-mounted PVsystem. Note: module orientation is either Horizontal / Landscape or Vertical / Portrait orientation. These determine rail and module clamp placement. NOTE: Schletter aluminum framing systems are not anodized. NOTE: THE DRAWINGS IN THIS MANUAL ARE NOT THE DRAWINGS FOR YOUR RACK ORDER. THESE ARE EXAMPLES AND ARE GENERAL INSTRUCTIONS FOR MOUNTING WS SYSTEMS. Planning: Drawings and parts list are prepared previous to rack system delivery. The drawing dimensions describe and detail the pre-assembled systems and individual components that will be assembled on the job site. Included are components, adjacencies and attachments. BEFORE YOU BEGIN DELIVERY OF YOUR RACK: The Customer is responsible to Count and account for Verification on Delivery of the materials. Please Count: - number of Pallets of Rails - number of rails on each Pallet - number of pre-assembled triangles - number of boxes of parts and hardware - content and number of all parts and hardware contained - content and number of miscellaneous other items ONCE YOU BEGIN: During your assembly, if unexpected situations happen and the rack does not fit the drawing layout. DO NOT ADJUST THE RACK without calling Schletter first. General contact phone number for Schletter Inc. is: (520) , or call your Salesman, who is the Project Manager on your System.

3 3. Tools you will need: - 6mm Allen Hex wrench and/or Star-head torque (for module clamps and triangle assembly bolts) - 8mm socket for various hex-head elements - 13mm wrench or socket (for triangle assembly nuts & M8 lag screws) - 15mm wrench or socket (for M10 flange nuts on standoffs and ballast trays & M10 lag screws) - 17mm wrench or sockets (for M10 machine bolts only on ballasted systems) (Tool List USA.pdf)

4 4. Example: The layout below is a Horizontal / Landscape mounting system for general installation. A drawing sheet of this racking system follows. The Main parts of a WS Windsafe System are: 1. Pre-assembled Triangle Support bolted to a Support Rail with hardware provided for strut attachments. 2. Purlin rails to hold Clamps for the panels 3. End Module clamps & 4. Middle Clamps for Item 7 Solar Panels. (By Others: i.e. Solar Installers) 5. SolTub Trays to hold ballast (ballast provided by installer) with hardware, or an alternate attachment to the roof structure. (Other fixation elements could be used if the roof cannot support ballast material for SolTubs.) 6. Windshot panels to deflect the wind. 7. Solar Panels (By Others: Solar Installers) (v1.ws 2hx4 30 Green Choice H- 4 piece)

5 5. Sample Drawing: (NOTE: Ballast material is Not Included; ballasting will be by Installer.) The following drawing is a sample; your drawing will look similar. Since there are various WS configurations, the Installation Instructions will show differing triangle racks to demonstrate general installations. (Sheet WS 2Hx4 20 )

6 6. Installation Instructions: Step 1: Unpack all of the assembly and parts you have received. You have already verified your shipping order. A. Preassembled Triangle Top (Parts, components and assemblies): Take the top support portion of the triangle. Unfold the struts. The Bolt/nut assemblies and Struts are already assembled. KlickTop components are in place on the top Support rail. KlickTops will be adjusted as shown per drawing dimensions when purlin rails are set. (F-Pre Assembled Triangle Top) (F-Purlins to Triangles) B. Base Beam for Preassembled Triangle with connection hardware is bolted at front. (F-Base beam w hardware)

7 C. You will bolt the triangle top struts to the base beam, which is already assembled at the front bolt. Attach the struts to the bottom rail using the M8x55 nut/bolt assembly. Tighten by hand, then torque to the required strength per the drawings. Note: there is a washer on either side of the rail between the nut and rail and the bolt and rail. (Support Triangle Explode) (F-Bolt to Base rail) (F-DSC06653) D. Assembled Triangle: (Support Triangle for WS 2Hx3-Tub)

8 6. Installation Instructions (Continued): Triangle to Ballast Tub Step 2: A. Place the Soltubs squared, per dimensions on the drawings on a mat, supplied by others, to protect the existing roofing membrane. (F-SolTubs to Matts) Step 3: B. Attach the bottom rail to the Soltubs with the nut/bolt assembly (Items 9, 10, 11, 12). An M10 Hex Head bolt goes through a pre-cut hole in the bottom of the triangle rail through the Soltub. Next a No-slide plate is placed under the soltub and secured with an M10 Flange Nut from the bottom. (F- Triangles to Tub Detail) (F-Triangles to Tubs) (F-Parts List)

9 6a. Installation Instructions, Alternate (Continued): Triangle to Stand-Offs, Bolted/Screwed to Structure below roof deck Step 2a: A. Place the assembled Triangle on the Stand-Off Assembly (8). Secure with screws (10) onto the roof deck to the structural joists below (provide flashing, to protect the existing roofing membrane per roofing industry standards as provided by others). (WS 2H x 3 20 w StOs-1-1) Step 3a: B. Continue assembling rack as per the following Installation Instructions. (WS 2H x 3 20 w StOs-1-2) (WS 2H x 3 20 w StOs-1-1)

10 6. Installation Instructions (Continued): Purlin Rails to KlickTop Step 4: A. Attach the purlin cross rails (13) in the KlickTop Components (3) on the top rails of the support triangles. Adjust the KlickTops to the placements of the rails as dimensioned on the drawings. Tighten the KlickTop with a 6mm hex key Allen wrench as shown in the photo. Verify the dimensions of placements of the Klick components with the drawings. The Purlins will cantilever equally over the support triangle at each end. Verify with the drawings. (F-Purlins to Triangles) (F-KlickTop Purlin Install) (F-DCS07745C)

11 6. Installation Instructions (Continued): Schletter solar mounting systems Step 5: Place the module clamp Assemblies. The module clamps will come in separate parts. This is if you are installing the typical Click-in components and module clamp. (Request separate document: Step 8: Component Details Connecting screws and nuts.) 1. Insert the green click component in the channel of the pre-formed Schletter rail. Insert the M8 nut with the tapered edges in the down direction. Push down with slight effort. Click it in so it is level. (DSC08628a) (DSC08629a) 2. Place a grounding plate (when required) which inserts with tabs for a Portrait installation. If you have a Landscape installation, contact Schletter Inc. for direction. The Module mounting clamp is then placed with a M8 hex head mounting bolt and serrated washer through the clamp. Hand tighten the bolt with an Allen wrench, do not completely torque, before the Module panel is installed. (DSC08630a) (DSC08640b)

12 6. Installation Instructions (Continued): Schletter solar mounting systems Step 5a: (Alternate) Rapid 2+ Grounding Module Clamp If you are using the Rapid 2+ Module Clamp with a stainless steel grounding spike on each side of the Middle Clamp, this will ground the Modules on either side. End clamps do not need grounding spikes if you have middle clamps with spikes on one side. Place the module clamp Assemblies. 1. Place the Rapid 2+ into the channel of the Schletter rail. Next place the M8 mounting bolt as shown below. The Module mounting clamp is then placed with a M8 hex head mounting bolt and serrated washer through the clamp. Hand tighten the bolt with an Allen wrench, do not completely torque, before the Module panel is installed. (DSC08615) (DSC08590) (F-DSC08623a)

13 6. Installation Instructions (Continued): Schletter solar mounting systems Step 6: Mounting the Module is by a certified licensed PV Installer Only. Refer to your Panel manufacturer s Installation Guide for specifics of the Module installation. (F-DSC06475a) Wiring and module installation are not in the realm of Schletter, Inc. If the modules are placed correctly (refer to drawings), there should be a 5mm gap between each module edge horizontally for Portrait layouts, and vertically for Landscape layouts. A 23mm gap includes the clamp in the other direction.

14 6. Installation Instructions (Continued): Schletter solar mounting systems Step 7: Attach the corrugated Windshot panels. See Component Details: 7.10 Wind Deflector: Winshot (following), use 2 Ejots (self-drilling metal screws) at each support rail for a M (160mm) winshot, 3 Ejots for M (250mm) winshot, and 3 Ejots for M (500mm) winshot. When more than two supports are used, the windsafe panels will overlap at each inside or center triangle. Note: as in the Detail A, all 3 types of Winshots are used. The horizontal overlapping of each of the 3 types allows for movement to prevent the Ejots from shearing off. The same Ejot can be shared where Windshots overlap horizontally. (v1ws2hx4 30 -Green Choice-HP 2 Wishot.tiff or jpg) 7. Component Details: Connecting screws and nuts (Request separate Brochure)

15 7. Component Details: Profile Overview Soltubs are the standard ballast trays for a Wind Safe. Schletter has other types of attachments for specific roof situations. 7.1 SolTub (Ballasted Tray) 7.2 SolTub End Cover (as needed) D D D SolTub2 SolTub3 SolTub4 CoverPlates: SolTub 2 SolTub 3 SolTub Stand Off: 3'', 4'', 8'', 12'' 7.4 Fix 2000 or Vario Fix-V Assembly , - 4, - 8, FixT Fix VarioFixV Standoffs for Roof Structure Attachment for Hanger Bolt with EPDM & Ejots (shown 4 & 8 ) attachments Anchoring for trapezoid sheet metal roofs 7.5 Base Beams for Pre-assembled Triangle 7.6 Struts G G M Base-Beam Light Base-Beam Profi Strut 30x3 7.7 Support Beams / Top Rail for Pre-assembled Triangle 7.8 KlickTop Profi Support Beam Light Support Beam M8 Support Beams are installed with KlickTop Mounts M8 KlickTop Assembly KlickTop Components allow faster mounting with flexible movement along the rail with Nose

16 7.8 Crossbeams / Purlins Eco05 Solo05 Profi 05 ProfiPlus KP-WS 7.9 Module Clamps: are adjusted for Module thickness with pre-assembled bolt & click , ( ), KP-EcoEndClamp KP-EcoMidClamp M , (Old # s) 28-39, With Gasket With Gaskets End-clamp Mid-clamp End-clamps (Rapid 2+) Mid-clamps Laminate Laminate Laminate Laminate End-clamp Middle-clamp End-clamp Middle-clamp ECO8 ECO8 ECO6 ECO 6 With flat plate and EPDM gaskets as required for Thin Film and Glass Modules Wind Deflector: Winshot M (160mm) M (250mm) M (500mm) Winshot deflectors are corrugated adjustable panels in 3 heights, custom cut lengths for Support widths as required.

17 8. Tolerances Schletter mounting systems are designed for economy to the specific snow and windloads of the installation site for the PV-system. The single components of the system are used to maximize the bearing capacity. The racking must be installed with precision to the exact drawing specifications, including splice locations and length of members. Please follow the drawings that came with your rack specification. Variations from the mounting plans can cause structural overstraining. Therefore, it is very important to keep within following tolerances: Cantilever Support Distance Tolerances: Distance of Supports: ± inch Cantilever: ± inch Module inlay in the clamp: inch Above is a KP Eco Mid Clamp on a KP-WS rail.

18 9. Examples:The following sets of sheets are both typical and atypical installation examples of WS Systems. (Note: These drawings are for descriptive of examples of a WS - Windsafe System. They might look similar to your system, but are NOT the drawings that you will be installing.) 1. (WS 1Vx 9 15 ) 1 Vertical row by 9 panels at 15 tilt PV system: This system is a simple triangle with one strut. It has the KlickTop Component mounting system assembly on the top triangle support to allow ease and adjustability when mounting the cross rail to support the modules. The KlickTop is the current standard at Schletter. Ballast materials for SolTubs are provided by Installer. (WS 1Vx9 15 )

19 2. (WS 2Vx 4 20 ) 2 Vertical rows by 4 panels at 20 tilt PV system: This system s triangle has 3 struts to support the top rail. In lieu of Soltub Ballast trays, the triangles are clamped on a DN support rail, which is bolted to 4 Standoffs screwed through the roof deck to the structure below. (WS 2Vx6 20 SO nvtr)

20 3. (WS 3H x 7 15 ) 3 Horizontal rows by 7 panels at 15 tilt PV system: This system is a Landscape (Horizontal) System on a DN support rail, which is bolted to 4 Standoffs screwed through the roof deck to the structure below. (WS 3H x R)

RAIL FREE SOLAR ROOF MOUNT

RAIL FREE SOLAR ROOF MOUNT RAIL FREE SOLAR ROOF MOUNT Utilizes EcoFasten Solar s patented technology Rock-it system Designed with the installer in mind. EcoFasten Solar specializes in solar roof attachments that are the easiest

More information

PITCHED ROOF STRUCTURES

PITCHED ROOF STRUCTURES PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system

More information

PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY

PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.

More information

AA Solar and Sun Power Plus

AA Solar and Sun Power Plus AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools

More information

RPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130

RPS - sales@rpssolar.com - 858 755 4505-12478 San Bruno Cove, San Diego, CA 92130 RPS - sales@rpssolar.com - 858 755 4505-2478 San Bruno Cove, San Diego, CA 9230 SWH Solar Mount Rail R-MR-SW-SR-0.5, R-MR-SW-SR-2, R-MR-SW-SR-4, R-MR-SW-SR-4B, R-MR-SW-SR-7 Part No. MR-SW-SR-0.5, MR-SW-SR-2,

More information

Washer, Electrical Equipment Bond. WEEB Patent Pending INSTALLATION INSTRUCTIONS. For Kinetic Solar K-Rack only

Washer, Electrical Equipment Bond. WEEB Patent Pending INSTALLATION INSTRUCTIONS. For Kinetic Solar K-Rack only Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For Kinetic Solar K-Rack only Please read carefully before installing. Wiley Electronics recommends that the sufficient details

More information

UBBINK SOLAR IN-ROOF SYSTEM

UBBINK SOLAR IN-ROOF SYSTEM UBBINK SOLAR IN-ROOF SYSTEM The integrated solar mounting system Installation guide UBBINK SOLAR IN-ROOF SYSTEM Table of contents Solar In-Roof System introduction System components Installation guide

More information

HORIZONTAL INSTALLATION

HORIZONTAL INSTALLATION THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof

More information

Solar Mounting System

Solar Mounting System Xiamen Antai New Energy Tech.Co., Ltd Installation Manual Antai Rail Solar Mounting System (Flat Roof Solution) Version 1.1 Office Add: 508#, North Tower, Guangxia Building Huli Torch Hi-tech Zone, Xiamen,

More information

0845 0098 980 www.nicholsonsts.com

0845 0098 980 www.nicholsonsts.com 0845 0098 980 www.nicholsonsts.com ROOFTRAK The IFP is revolutionising the way we fix things to roofs. Technical Director of a leading UK roofing system manufacturer The ROOFTRAK-IFP A revolutionary solution

More information

CENTERLINE Motor Control Centers Splicing Horizontal Ground Buses

CENTERLINE Motor Control Centers Splicing Horizontal Ground Buses Instructions CENTERLINE Motor Control Centers Splicing Horizontal Ground Buses Application This publication outlines the procedure for splicing the horizontal ground bus in front mounted and back-to-back

More information

Structural Holding System

Structural Holding System Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies

More information

00MK-MA0190-EN00. Mounting System ASSEMBLY INSTRUCTIONS. Universal Light system with locking brackets, for sloped roof

00MK-MA0190-EN00. Mounting System ASSEMBLY INSTRUCTIONS. Universal Light system with locking brackets, for sloped roof 00MK-MA0190-EN00 Mounting System ASSEMBLY INSTRUCTIONS Universal Light system with locking brackets, for sloped roof Rev.02 November 2014 Table of contents General instructions 2 General safety instructions

More information

How To Mount An Ecosa Series Solar Panel

How To Mount An Ecosa Series Solar Panel (including PanelClaw ) This Guide is valid in North America only (ETL listed; conforms to UL Standard 1703) PanelClaw is a registered trademark of PanelClaw, Inc. SM-0050revA ELECTRICAL EQUIPMENT CHECK

More information

Installation manual ValkPitched - Insert

Installation manual ValkPitched - Insert Van der Valk Solar Systems TRCKING ND FIXED SOLR MOUNTING SYSTEMS Installation manual ValkPitched - Insert Version 10 EN General user instructions Solar mounting systems Congratulations on buying a Van

More information

BUILDINGA 1/10 SCALE FLATBED TRAILER

BUILDINGA 1/10 SCALE FLATBED TRAILER VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,

More information

ASSEMBLY INSTRUCTIONS Residential Roof solutions

ASSEMBLY INSTRUCTIONS Residential Roof solutions ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS

More information

WARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR.

WARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR. Model: Document Number: 64058111 Kit Number: 64058112 Revision: 02 Description: Release Date: 04/08 Introduction This kit allows a PS90 scale to be integrated into a standard gravity conveyor. The kit

More information

ES-A Series Photovoltaic Panels

ES-A Series Photovoltaic Panels Guide This Guide is valid in North America only (ETL listed; conforms to UL Standard 1703) ELECTRICAL EQUIPMENT CHECK WITH YOUR INSTALLER Evergreen Solar ES-A Series photovoltaic (PV, solar electric) panels

More information

Washer, Electrical Equipment Bond WEEB

Washer, Electrical Equipment Bond WEEB Washer, Electrical Equipment Bond WEEB INSTALLATION INSTRUCTIONS For IronRidge Light & Standard Series Rails Only Please read carefully before installing. Burndy recommends that the sufficient details

More information

Solar Mounting Catalogue

Solar Mounting Catalogue Solar Mounting Catalogue Tile roof, metal sheet roof, flat roof, whatever type of your roof is, we can supply you all rooftop mounting solutions. With high quality of anodized aluminium and galvanized

More information

USER INSTRUCTIONS AND SPECIFICATIONS for use of SAFE APPROACH STANDING SEAM ANCHOR & SAFE APPROACH METAL ROOF SCREW-DOWN ANCHOR

USER INSTRUCTIONS AND SPECIFICATIONS for use of SAFE APPROACH STANDING SEAM ANCHOR & SAFE APPROACH METAL ROOF SCREW-DOWN ANCHOR e) Allow the ring to slide over the end of the clevis pin and push the ring onto the clevis pin when it is centered. USER INSTRUCTIONS AND SPECIFICATIONS for use of SAFE APPROACH STANDING SEAM ANCHOR &

More information

Professional Solar Mounting Systems Mounting and Project Planning

Professional Solar Mounting Systems Mounting and Project Planning Professional Solar Mounting Systems Mounting and Project Planning General information: Production-specifi c tolerances are to be considered with all specifi ed dimensions. At the request of the customer,

More information

INSTRUCTIONS: LocknCharge Laptop Carts

INSTRUCTIONS: LocknCharge Laptop Carts INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes

More information

EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast

EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather

More information

Chapter 10 - Scaffolding Systems

Chapter 10 - Scaffolding Systems Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5

More information

Installation manual Solar Tracker

Installation manual Solar Tracker Van der Valk Solar Systems TRACKNG AND FXED SOLAR MOUNTNG SYSTEMS nstallation manual Solar Tracker Version 07 EN General user instructions Solar mounting systems Congratulations on buying a Van der Valk

More information

Small Flat Panel Lift Arm FSA-1004 and KSA-1004

Small Flat Panel Lift Arm FSA-1004 and KSA-1004 I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows

More information

Assembly Instructions for the InteliTrack 3000 Rail Tracking System

Assembly Instructions for the InteliTrack 3000 Rail Tracking System Assembly Instructions for the InteliTrack 3000 Rail Tracking System InteliTrack is a trademark of Sedona Solar Technology. Sedona Solar Technology 16 April 2013 1 1. Before you begin WARNING Safety equipment

More information

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.

More information

Flat roof assembly system from Solarworld Design and installation

Flat roof assembly system from Solarworld Design and installation Flat roof assembly system from Solarworld Design and installation August 2009 SolarWorld. And EveryDay is a SunDay. www.solarworld-global.com Proven quality simply clever Congratulations and thank you

More information

Installation manual Pitched Roof Clamp System

Installation manual Pitched Roof Clamp System Van der Valk Solar Systems TRACKNG AND FXED SOLAR MOUNTNG SYSTEMS nstallation manual Pitched Roof Clamp System Version 11 EN General user instructions Solar mounting systems Congratulations on buying a

More information

SnapNrack TM SERIES 100 Roof Mount InstallaTIon manual SERIES 100 ROOF MOUNT

SnapNrack TM SERIES 100 Roof Mount InstallaTIon manual SERIES 100 ROOF MOUNT SnapNrack TM SERIES 100 Roof Mount InstallaTIon manual SERIES 100 ROOF MOUNT CODE COMPLIANT INSTALLATION MANUAL 2012 i Table of Contents 1. INTRODUCTION...3 1.1 OVERVIEW OF THE SNAPNRACK SYSTEM...3 1.2

More information

AluGrid product sheet

AluGrid product sheet AluGrid The flat roof system with optimized superimposed load quick, simple and mainly tool-free mounting reduced number of components economically effi cient system structural analysis based on the latest

More information

Guidelines for Earthquake Bracing of Residential Water Heaters

Guidelines for Earthquake Bracing of Residential Water Heaters Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)

More information

TracRac G2. Overhead Rack Installation Instructions. TracRac Inc. 994 Jefferson St. FallRiver MA 02721 www.tracrac.com 800-501-1587 IN-42000_B

TracRac G2. Overhead Rack Installation Instructions. TracRac Inc. 994 Jefferson St. FallRiver MA 02721 www.tracrac.com 800-501-1587 IN-42000_B IN-42000_B TracRac G2 Overhead Rack Installation Instructions TracRac Inc. 994 Jefferson St. FallRiver MA 02721 www.tracrac.com 800-501-1587 Thank you for your purchase of a TracRac G2 Sliding Cargo Manaagement

More information

Cat. No. Material Siderail Height. Designed to lock into place for easy alignment and installation. ABW-4-SSP

Cat. No. Material Siderail Height. Designed to lock into place for easy alignment and installation. ABW-4-SSP Metallic Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. Cat. No.

More information

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...

More information

Uncovered Decks & Porches

Uncovered Decks & Porches Uncovered Decks & Porches Building Guides for Homeowners Why Do I need a Permit? D I D Y O U K N O W? As owner-builder you are the responsible party of record on such a permit. If your work is being performed

More information

DCF Optimized Rack System

DCF Optimized Rack System Integrated Cabinet Solutions For Business-Critical Continuity DCF Optimized Rack System User Manual IMPORTANT SAFETY GUIDELINES SAVE THESE INSTRUCTIONS This manual contains important instructions that

More information

39HQ Airovision Air Handling Units

39HQ Airovision Air Handling Units 39HQ Airovision Air Handling Units Mounting instructions CONTENTS 1 - TRANSPORT AND LIFTING INSTRUCTIONS... 3 1.1 - General... 3 1.2 - Transport and storage... 3 1.3 - Roof edge protection during transport

More information

Technical data sheet PVC Bi-fold doors

Technical data sheet PVC Bi-fold doors Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top

More information

INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb

INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation

More information

Installation Instructions:

Installation Instructions: Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement

More information

Removable Aluminium posts

Removable Aluminium posts Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole

More information

This handout is a guide only and does not contain all of the requirements of the Minnesota State Building Code or city ordinances.

This handout is a guide only and does not contain all of the requirements of the Minnesota State Building Code or city ordinances. Residential Decks Community Development Department Building Inspections Division 5200 85 th Avenue North / Brooklyn Park, MN 55443 Phone: (763) 488-6379 / Fax: (763) 493-8171 6/15 www.brooklynpark.org

More information

Ceiling Mounted Folding Attic Ladders Installation Instructions

Ceiling Mounted Folding Attic Ladders Installation Instructions Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:

More information

Installation Guide. WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers. February, 2011

Installation Guide. WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers. February, 2011 WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers Installation Guide February, 2011 Pace Scientific Inc www.pace-sci.com Tel: 704-799-0688 sales@pace-sci.com 1 Disclaimer The following warranty

More information

Installation manual ValkPitched - Clamp

Installation manual ValkPitched - Clamp Van der Valk Solar Systems TRCKING ND FIXED SOLR MOUNTING SYSTEMS Installation manual ValkPitched - Clamp Version 16 EN General user instructions Solar mounting systems Congratulations on buying a Van

More information

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair SERVICE MANUAL US Corpus 3G Seat system for electric wheelchair How to contact Permobil Head Office of the Permobil group Produced and published by Permobil AB, Sweden Version 4, 2014-07 Item No.: 205260-US-0

More information

Les Produits MURPHCO Ltée

Les Produits MURPHCO Ltée DESCRIPTION The Murphco support clamp is an assembly made entirely of stainless steel and conceived for all sleeved roof drains. The Murphco Support Clamp is compatible with all types of Murphco* copper

More information

MGB Chrome Bumper Conversion

MGB Chrome Bumper Conversion MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different

More information

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At

More information

Solar Panel Installations

Solar Panel Installations Solar Panel Installations Page 1 of 6 SINGLE-FAMILY RESIDENTIAL CHECKLIST City of Hayward Development Services Department Revised: 7-09-15 PERMIT REQUIREMENTS Permits are required for all solar panel installations.

More information

RZ Guardrail System Installation Manual

RZ Guardrail System Installation Manual TM RZ Guardrail System Installation Manual RZ Guardrail System Compliance is based on OSHA standards: (Standards - 29 CFR) 1910.23 (e) and (Standards - 29 CFR) 1926.502 (b) Failure to read, understand

More information

FTC 2015-2016 DIY Mountain Build Guide

FTC 2015-2016 DIY Mountain Build Guide FTC 2015-2016 DIY Mountain Build Guide Assembly Instructions Check out the DIY2015-2016 Prints and BoM for individual part details. Release 1.0 9/10/15 Page 1 This guide and Bill of Materials are for constructing

More information

AU-110 racking guide NBXPN: 023

AU-110 racking guide NBXPN: 023 AU-110 racking guide NBXPN: 023 1. Overview NIMBOXX AU-110 Rack Installation This guide provides setup instructions for installing your NIMBOXX AU-110 in a rack. Following these steps in the order given

More information

Standard Sleep Pod Side Entry Assembly Instructions

Standard Sleep Pod Side Entry Assembly Instructions Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people

More information

Residential Deck Safety, Construction, and Repair

Residential Deck Safety, Construction, and Repair Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

Rack Installation. Unpacking the System. Choosing a Setup Location. General Server Precautions. Barracuda Appliances

Rack Installation. Unpacking the System. Choosing a Setup Location. General Server Precautions. Barracuda Appliances This set of instructions applies to racking and rail kit installation for 6XX and above. The Rack Mounting Instructions section below provides information on installing the SC825 chassis into a rack unit

More information

CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions

CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be

More information

Installation Instructions For Slider Casement Air Conditioners

Installation Instructions For Slider Casement Air Conditioners Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT

More information

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001 Express5800/120Ed Rack Mount Kit Installation Procedures PN: 455-01607-001 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

12U Adjustable 4 Post Open Frame Server Rack

12U Adjustable 4 Post Open Frame Server Rack 12U Adjustable 4 Post Open Frame Server Rack 4POSTRACK12U *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario

More information

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the

More information

Solar mounting systems for flat roofs

Solar mounting systems for flat roofs Solar mounting systems for flat roofs Rapid and simple installation Every required angle of inclination We support your investment Customised power station As the efficiency of solar systems is largely

More information

Liebert DCR Part of the SmartRow Offering. Installation Manual 3-6, Single/Redundant and 5-10 Racks Higher Capacity Cooling Units, 60Hz

Liebert DCR Part of the SmartRow Offering. Installation Manual 3-6, Single/Redundant and 5-10 Racks Higher Capacity Cooling Units, 60Hz Liebert DCR Part of the SmartRow Offering Installation Manual 3-6, Single/Redundant and 5-10 Racks Higher Capacity Cooling Units, 60Hz TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS................................................1

More information

March 14, 2007. Installation of Bay, Bow and Garden Windows

March 14, 2007. Installation of Bay, Bow and Garden Windows March 14, 2007 Re: Installation of Bay, Bow and Garden Windows Attached are the Atrium Companies, Inc recommendation for the installation of bay, bow and garden windows. These instructions were developed

More information

PANELIZED HOME INSTALLATION GUIDELINE

PANELIZED HOME INSTALLATION GUIDELINE PANELIZED HOME INSTALLATION GUIDELINE A typical home package will be constructed of Snap-N-Lock Insulated Panels clad with steel skins. 4" panels will be used for the walls, and 6" panels for the roof.

More information

1500 Follow Spot Yoke

1500 Follow Spot Yoke = 1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical

More information

Unpacking, Installation, and Customization

Unpacking, Installation, and Customization Unpacking, Installation, and Customization NetShelter WX Enclosure AR100 AR100HD Contents Unpacking... 1 How to Unpack the Enclosure............................... 1 Please Recycle..........................................

More information

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC) APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines

More information

RACKING AND ATTACHMENT CRITERIA FOR EFFECTIVE MEMBRANE ROOF SYSTEM INTEGRATION Public Version 1: July 9, 2012

RACKING AND ATTACHMENT CRITERIA FOR EFFECTIVE MEMBRANE ROOF SYSTEM INTEGRATION Public Version 1: July 9, 2012 RACKING AND ATTACHMENT CRITERIA FOR EFFECTIVE MEMBRANE ROOF SYSTEM INTEGRATION Public Version 1: July 9, 2012 Commercial rooftops represent the most available, sustainable and secure real estate for new

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

Residential Decks. Planning and Development Services Department

Residential Decks. Planning and Development Services Department Building Safety Division 8500 Santa Fe Drive Overland Park, KS 66212 (913) 895-6225 Fax (913) 895-5016 Email: permitservices@opkansas.org Planning and Development Services Department Residential Decks

More information

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PARTS REQUIRED Single QuickStand Parts A (1) QuickStand Unit B (1) Base Plate C (1) Platform D (1) Palm Support E (1) VESA Plate F (6) M8 x 18 mm Flat Head Machine Screws G (4)

More information

AM/FM ANTENNA KIT (TOUR-PAK MOUNT)

AM/FM ANTENNA KIT (TOUR-PAK MOUNT) -J077 REV. 008-0-0 AM/FM ANTENNA KIT (TOUR-PAK MOUNT) GENERAL Kit Number 7-98A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab

Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware

More information

Cooktop Low-Profile Ventilation Hoods

Cooktop Low-Profile Ventilation Hoods INSTALLATION GUIDE Cooktop Low-Profile Ventilation Hoods Contents Wolf Cooktop Low-Profile Ventilation Hoods........ 3 Cooktop Low-Profile Hood Specifications.......... 4 Cooktop Low-Profile Hood Installation............

More information

By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige

By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Prestige IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

42U/45U 28" Wide Rack Installation & Service Guide

42U/45U 28 Wide Rack Installation & Service Guide 42U/45U 28" Wide Rack Installation & Service Guide 96-00171-005 Rev B Important Information Information in this document is subject to change without notice and does not represent a commitment on the part

More information

Installation Guide of Sunrise Solartech PV Modules. Term 2013. Contents. Purpose of this guide. General. Safety precaution for installing a solar

Installation Guide of Sunrise Solartech PV Modules. Term 2013. Contents. Purpose of this guide. General. Safety precaution for installing a solar Installation Guide of Sunrise Solartech PV Modules Term 2013 Contents Purpose of this guide General Safety precaution for installing a solar Photovoltaic system Product Identification Mechanical Installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.

More information

6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU

6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU 6720616592.00-1.SD Flat roof Rack Mounting AU Installation instructions 2 Contents AU Contents 1 Key to symbols and safety instructions....... 3 1.1 Explanation of symbols................ 3 1.2 Safety

More information

Guidelines for Earthquake Bracing Residential Water Heaters

Guidelines for Earthquake Bracing Residential Water Heaters Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the

More information

Dave s Sheet Metal Bending Brake

Dave s Sheet Metal Bending Brake Dave s Sheet Metal Bending Brake I started building a Zenith CH601XL from plans in mid January 2006. After several failed attempts to bend the rudder spar I ended up going to a local sheet metal shop for

More information

After reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE

After reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE 86 :: Certificate in Construction Supervision (CIVIL) 12 ROOF 12.1 INTRODUCTION The structure provided to cover the house surface (floor) is known as roof. For different situation and requirement, it is

More information

Dock Hardware & Accessory Products Catalog

Dock Hardware & Accessory Products Catalog Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set

More information

Installation Instructions HighRock 4x4 TM

Installation Instructions HighRock 4x4 TM Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep YJ and TJ Wrangler 1986 2006 Part Number: 49312 www.bestop.com - We re here to help! Visit our web site and click on Ask

More information

AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech

AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual

More information

UNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE BUILDINGS CONTRACTOR SERIES 2 X 4 FRAMES

UNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE BUILDINGS CONTRACTOR SERIES 2 X 4 FRAMES UNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE BUILDINGS CONTRACTOR SERIES 2 X 4 FRAMES Our unique assembly process quickly transforms the individual pieces into a finished structure that will give you

More information

PRODUCT: 3/8 RIVET NUT INSTALL INSTRUCTIONS READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 8:00 AM 5:00 PM PST

PRODUCT: 3/8 RIVET NUT INSTALL INSTRUCTIONS READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 8:00 AM 5:00 PM PST PRODUCT: 3/8 RIVET NUT INSTALL INSTRUCTIONS READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 8:00 AM 5:00 PM PST The MetalCloak experience includes the ease of installation

More information

Installation Instructions

Installation Instructions READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

AM/FM ANTENNA RELOCATION KIT

AM/FM ANTENNA RELOCATION KIT -J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model

More information

CETAC Z-Drive Assembly

CETAC Z-Drive Assembly CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your

More information