RENEWABLE ENERGY SUBSTATIONS SOLAR PHOTOVOLTAIC AND WIND POWER. tgood.com. Energy. Fast.

Transcription

1 RENEWABLE ENERGY SUBSTATIONS SOLAR PHOTOVOLTAIC AND WIND POWER tgood.com Energy. Fast.

2 TGOOD is a world leading manufacturer of prefabricated renewable energy substations PRODUCT CONCEPT TGOOD has committed to global leadership in eco-friendly product development. We produce a full lineup of prefabricated renewable energy substations and electric vehicle charging solutions. TGOOD products are sustainably produced at our solar-powered manufacturing facilities that generate a surplus of electricity on sunny days. Fully enclosed, prefabricated substations incorporate modules including DC switchgear, inverters, low voltage AC switchgear, transformers and high voltage switchgear to meet project needs. TGOOD prefabricated substations have been put to work in the world s harshest operating environments including coastal and high altitude sites. Over 5000 switchgear units produced annually in TGOOD s ISO 9001 certified facilities delivers significant economies of scale for lower costs. 2 Renewable Energy Substations

3 ENVIRONMENTAL SPECIFICATIONS Protection level: IP54 Min. Altitude: 4000 metres above sea level Ambient temperature: -45ºC to 55ºC Wind velocity: 35m/s Ground slope: 3 Renewable Energy Substations 3

4 2100kW rooftop solar photovoltaic demonstration project at TGOOD factory in Qingdao China 4 Renewable Energy Substations

5 PRODUCT OVERVIEW RENEWABLE ENERGY SUBSTATIONS Fully integrated prefabricated substations and E-House systems Best-in-class lead times measured in weeks, not months Modular designs can be skid or trailer mounted for rapid transport Exceptional weatherproofing with strong condensation and corrosion resistance High voltage switchgear up to 36kV available EXAMPLE PROJECT SOLAR PHOTOVOLTAIC SUBSTATIONS The TGOOD 2100kW integrated solar photovoltaic demonstration project supplies power to TGOOD s manufacturing facilities in Qingdao, China. The project was fully designed and installed by TGOOD engineers. Annual electricity production averages 2200MWh which is equivalent to the power generated from 750 tonnes of coal burned in a conventional coal-fired power plant. The project reduces annual CO2 emissions by 186 decitonnes, sulphur dioxide emissions by 10.4 tonnes, nitrogen oxide emissions by 7.4 tonnes, and dust emissions by 12.6 tonnes. TGOOD is committed to doing our part to reduce the global effects of climate change and improve the air quality in China. Renewable Energy Substations 5

6 TGOOD 36kV Skid Mounted Wind Power Substation 6 Renewable Energy Substations

7 KEY BENEFITS RENEWABLE ENERGY SUBSTATIONS SPEED Many substation solutions ready to depart factory in as little as six weeks. Rigorous factory testing reduces commissioning times by an average of 50%. Modular designs can be skid mounted for rapid installation and transport. VALUE-FOR-MONEY SERVICE Complete engineering, procurement and construction (EPC) services available. Electrical components pre-commissioned before leaving factory. TGOOD s experience engineering team has engineered dozens of renewable energy projects across China. Extraordinary high quality and reliable components manufactured in ISO 9001 certified facilities. Compact substation modules reduce shipping and transportation costs. Over 5000 switchgear units produced annually delivers significant economies of scale for lower costs. EXAMPLE PROJECT WIND POWER SUBSTATIONS The TGOOD Zhangshang wind power project in Zhangjiakou City, Heibei Province, China utilizes 35kV prefabricated substations to connect a high capacity windfarm to the state power grid. In a region characterized by its cold, dry winters and hot, humid summers, TGOOD s substations utilize advanced climate enclosure systems and provide exceptional weatherproofing with strong condensation and corrosion resistance to ensure a substation life of up to six decades. Renewable Energy Substations 7

8 SOLAR AND WIND POWER BOOSTER STATIONS 36kV Solar and Wind Booster Station 15kV Solar and Wind Booster Station 36kV Skid Mount Solar and Wind Booster Station STATION COMPONENTS MV Power Grid LV Unit Transformer MV Unit Wind Turbines Booster Station Components 8 Renewable Energy Substations

9 PRODUCT OVERVIEW Booster stations collect distributed power from individual wind turbines and channel the power into the higher voltage network. Consists of separate enclosed cabinets: low voltage switchgear cabinet, stepup transformer cabinet and high voltage switchgear cabinet. Skid mount and containerized E-House options available. Typical voltage levels: 15kV, 25kV, 36kV. For large projects, intertie solutions up to 145kV available. SOLAR AND WIND POWER SUBSTATION CONFIGURATIONS 15kV Prefabricated Substation 36kV Prefabricated Substation 36kV Skid Mount Substation Transformer Dry Type, Oil Filled Dry Type, Oil Filled Oil Filled Substation Features Step-up voltage & Connect to grid Step-up voltage & Connect to grid Step-up voltage & Connect to grid Typical Size L x W (mm) 3500 x x x 2200 Rating (kva) 1000, , , 1250 Environmental Conditions Cities, coastal regions All conditions including coastal & desert All conditions including coastal & desert Renewable Energy Substations 9

10 SPOTLIGHT: 35KV SKID MOUNTED WIND POWER SUBSTATION STATION LAYOUT HV Enclosure Transformer 3400 a b c a b c LV Enclosure A B C Skid mounted substation configurations reduce size of enclosure for maximum costeffectiveness. High voltage compartment incorporates viewing window and electromagnetic door lock to facilitate observation and operator safety. High voltage and low voltage cabinets are fully sealed against dust, moisture, and environmental contamination. 10 Renewable Energy Substations

11 PRIMARY SYSTEM DIAGRAM A manually operated, high voltage oilimmersed load break switch is used. Plug type high voltage fuse provides fuse signal to protection and monitoring equipment. Transformer temperature, pressure, and oil level monitored. Skid mount substation oil filled transformers available in sizes up to several thousand kva. Both the high voltage oil-immersed load break switch and the plug fuse are installed in a separate oil compartment within the transformer's oil tank. Renewable Energy Substations 11

12 INTEGRATED SOLAR SUBSTATIONS AND INVERTER STATIONS 36kV Skid Mount Integrated Solar Substation 15kV Integrated Solar Substation 36kV Integrated Solar Substation STATION COMPONENTS Solar Panel Array Convergence Box MV Power Grid DC Unit Inverter LV Unit Transformer MV Unit Inverter Station Components Photovoltaic Booster Station Components Integrated Power Station Components 12 Renewable Energy Substations

13 PRODUCT OVERVIEW Inverter module converts low voltage direct current from solar panels into low voltage three phase alternating current. Booster station module transforms low voltage three phase alternating current from inverter into high voltage three phase alternating current for integration with electrical grid. Integrated substation module combines inverter and booster station modules, eliminating external cabling between modules for a completely plug and play solution. Substations consist of separate compartments for each major component: inverter compartment, low voltage switchgear compartment, step-up transformer compart ment and high voltage switchgear compartment. Fully enclosed transformer module utilizes exhaust fans for reliable cooling performance. E-House enclosure constructed of insulated dual layer panels with technology that eliminates thermal bridging for exceptional all-climate performance. 15kV Integrated Prefabricated Substation 36kV Integrated Prefabricated Substation 36kV Skid Mount Integrated Substation Solar Inverter Station Transformer Dry Type, Oil Filled Dry Type, Oil Filled Oil Filled N/A Substation Features Inverter, Step-up voltage & Connect to grid Inverter, Step-up voltage & Connect to grid Inverter, Step-up voltage & Connect to grid Inverter Typical Size L x W (mm) 6000x x x x2438 Rating (kva) 20,000 50,000 50, , 630 Environmental Conditions Cities, coastal regions All conditions including coastal & desert All conditions including coastal & desert All conditions including coastal & desert Renewable Energy Substations 13

14 DISTRIBUTED SOLAR POWER PLANT STATION COMPONENTS Solar Panel Array Convergence Box HV Power Grid Booster Station HV GIS Unit DC Unit Inverter LV Unit MV Transformer MV Unit HV Transformer Distributed Solar Power Plant Components 14 Renewable Energy Substations

15 STATION LAYOUT DC 600 Inverter 500 Communication 3000 Manhole Distribution Inverter 100 Isolation Transformer 500 AC 3800 Distributed solar power plants incorporate DC modules, inverters, low voltage switchgear, and isolation transformers necessary to connect to a switchgear station at 400V AC. Customizable layouts may incorporate additional AC and DC modules according to project needs. Acoustic and electromagnetic shielding reduce noise and radiation for safe and silent operation. Extremely compact, easy-to-install designs can be quickly set up in urban areas, factory grounds and project sites. PRIMARY SYSTEM DIAGRAM Transformer Outgoing 500kW Inverter V + - Junction Box Junction Box Junction Box Junction Box Junction Box Junction Box Junction Box Backup Renewable Energy Substations 15

16 PREFABRICATED RENEWABLE ENERGY SWITCHGEAR STATION PRODUCT OVERVIEW Renewable energy switchgear stations connect multiple distributed power generation stations with the power grid. Allows for the interconnection of multiple power generation stations in large, distributed solar and wind power projects in harsh environments. PRODUCT FEATURES Remotely accessible control system allows for real-time operation of the substation with a wide range of SCADA systems for remote metering and data collection. Switchgear station may work in concert with a high voltage GIS or HGIS (hybrid gas insulated switchgear) substation with a rated voltage of up to 145kV. Vacuum and SF6 breakers available. Metal-enclosed and metal-clad withdrawable switchgear layouts available. 16 Renewable Energy Substations

17 PRIMARY SYSTEM DIAGRAM Outgoing Metering Cubicle Collector Circuit Incoming #1 Collector Circuit Incoming #2 Collector Circuit Incoming #3 Collector Circuit Incoming #4 SVG Outgoing Station Transformer Outgoing PT STATION LAYOUT 3200 Outgoing Metering Cubicle Collector Circuit Incoming #1 Collector Circuit Incoming #2 Collector Circuit Incoming #3 Collector Circuit Incoming #4 SVG Outgoing Station Transformer Outgoing PT Remote Communication Display Monitor System Display AC Indoor Unit AC Outdoor Unit Manhole AC Indoor Unit Cmmunication Display #1 Communication Display #2 Reserved Display AC Outdoor Unit Renewable Energy Substations 17

18 Skid Mounted Solar Power Supply Station 18 Renewable Energy Substations

19 PRODUCT OVERVIEW TGOOD s skid mounted power supply provides a portable and highly resilient power solution for remote worksites that lack electrical infrastructure. Units are completely airtight, waterproof and dustproof for use in harsh environments. Integrated components: PV cells mounted on rack, charge-discharge controller, maintenance-free battery, fast charging module, control box, accumulator module. AC380V Two configurations available: >800 W capacity configuration provides power to pipeline projects, 2-3 kw capacity configuration provides power to centralized monitoring and control equipment. KEY FEATURES Rated voltage: AC 220V. Replaceable battery pack provides emergency power for up to 7 days. Extremely low-maintenance units provide up to three decades of service (excluding battery pack). Reinforced impact resistant E-House bodies. Photovoltaic Array Constant temperature and humidity environment. Renewable Energy Substations 19

20 BR-SW-En-NA TGOOD # Main Street Penticton, British Columbia V2A 5E6 Canada Tel: Fax: