BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200"

Transcription

1 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1

2 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring Viton (T max = 110 C) 6 Handle AlSi8 Dimensions DN A PN6 B Dk d Nr. D C G b PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN40 15* * , , TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes Face to face dimensions conform to DIN3202 F18. *Type KPJ Body made of Carbon Steel A105. **Available in PN40 up to DN80.

3 BALL VALVE KPG FULL BORE, DN25 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN200 Materials 1 Body Ductile Iron GGG40 2 Ball Brass Ms 58 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring Viton (T max = 110 C) 6 Handle Iron C1016 Dimensions DN A PN6 B Dk d Nr. C D G b PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN /325* M /350* M * Notes Face to face dimensions conform to DIN3202 F4. *Face to face dimensions conform to DIN3202 F5. **Available in PN40 up to DN50. 2

4

5 BALL VALVE KPA-G FULL BORE, DN15 DN200, PN16 GAS Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 (DN15 DN100) Brass Ms 58 (DN125 DN200) 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring Viton (T max = 110 C) 6 Handle Iron C1016 Dimensions DN ØA , B ØC D E Notes Available on request in PN40. 3

6

7 BALL VALVE KPV-G DP FULL BORE, DN25 DN250*, PN16, PN40 GAS Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring Viton (T max = 110 C) 6 Handle AlSi8 Dimensions DN A D C G PN16 PN40 B b Dk d Nr. B b Dk d Nr , /200* TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes Face to face dimensions conform to DIN3202 F17. *DN250 reduced bore. 4

8

9 BALL VALVE KPV-G DU FULL BORE, DN25 DN200, PN6, PN16, PN40 GAS Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring Viton (T max = 110 C) 6 Handle AlSi8 Dimensions A DN S14 S13 B D D1 s ,7 2, ,4 2, ,3 2, ,3 3, ,5 76,1 3, ,9 4, ,3 4, ,7 4, ,3 4, ,1 6,3 250/200* ,0 7,1 TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes *DN250 reduced bore. 5

10

11 BALL VALVE KPN FULL BORE, DN15 DN200, PN6, PN16, PN40** DN25 DN50 DN65 DN100 DN125 DN200 6

12 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring 6 Handle AlSi8 DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) Dimensions DN A PN6 B Dk d Nr. D C G b PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN40 15* * , , TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes Face to face dimensions conform to DIN3202 F18. *Body made of Carbon Steel A105. **Available in PN40 up to DN80.

13 BALL VALVE KPC FULL BORE, DN25 DN200, PN6, PN16, PN40** Materials 1 Body Ductile Iron GGG40 2 Ball Brass Ms 58 3 Stem Brass Ms 58 4 Seats PTFE 5 O-Ring DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) 6 Handle Iron C1016 Dimensions B Dk d Nr. DN A PN6 PN16 PN40 C D G b PN6 PN16 PN40 PN6 PN16 PN40 PN6 PN16 PN /325* M /350* M * Notes Face to face dimensions conform to DIN3202 F4. *Face to face dimensions conform to DIN3202 F5. **Available in PN40 up to DN50. 7

14

15 BALL VALVE KPA FULL BORE, DN15 DN200, PN16 Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 (DN15 DN100) Brass Ms 58 (DN125 DN200) 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) 6 Handle Iron C1016 Dimensions DN ØA B ØC D E , Notes Available on request in PN40. 8

16

17 BALL VALVE KPV DP FULL BORE, DN25 DN250*, PN16, PN40 Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) 6 Handle AlSi8 Dimensions DN A D C G PN16 PN40 B b Dk d Nr. B b Dk d Nr , /200* TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes Face to face dimensions conform to DIN3202 F17. *DN250 reduced bore. 9

18

19 BALL VALVE KPV DU FULL BORE, DN25 DN200, PN6, PN16, PN40 Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE 5 O-Ring DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) 6 Handle AlSi8 Dimensions A DN S14 S13 B D D1 s ,7 2, ,4 2, ,3 2, ,3 3, ,5 76,1 3, ,9 4, ,3 4, ,7 4, ,3 4, ,1 6,3 250/200* ,0 7,1 TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes *DN250 reduced bore. 10

20

21 BALL VALVE KPF FULL BORE, DN25 DN200, ANSI CLASS 150 AND 300 Materials 1 Body Carbon Steel A105 2 Ball Stainless Steel A304 3 Stem Stainless Steel A420 4 Seats PTFE 5 O-Ring DP NBR (T max = 100 C) DPE EPDM (T max = 150 C) DPP PTFE (T max = 200 C) 6 Handle Iron C1016 Dimensions DN ANSI Class 150 (PN20) ANSI Class 300 (PN50) A B b Dk d Nr. A B b Dk d Nr. D C G ,5 79, ,5 89, ,5 98, ,0 114, ,5 120, ,5 127, ,0 152, ,0 168, ,0 190, ,0 200, ,5 241, ,0 270, ,0 298, ,5 330, RR 11

22

23 BALL VALVE KPM FULL BORE, DN50 DN200, PN16 ABRASIVE MEDIUMS Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats Alloy CuSn5Pb5ZN5 5 O-Ring NBR (max =100 C) 6 Handle AlSi8 Dimensions DN A B D C G b Dk d Nr , TRUNION MOUNTED BALL AND SPRING LOADED WASHERS Notes Face to face dimensions conform to DIN3202 F18. 12

24

25 BALL VALVE KPV SPECIAL EXECUTIONS STEM EXTENSION FOR UNDERGROUND INSTALLATION SECONDARY SEALING SYSTEM 13

26

27 ACTUATOR OPERATED BALL VALVES MANUAL GEARBOX ELECTRIC ACTUATOR PNEUMATIC ACTUATOR 14

28

29 ADAPTERS FOR ACTUATORS S P K A B , 14, DN 25, 32, 40, 50 F , DN 65, 80, 100 F07 22, 27, DN 125 F10 22, 27, DN 125, 150 F12 22, 27, DN 200 for KPN F DN 200 for KPC F12 C D E F F05 DN 25, 32, 40, 50 for KPN and KPC F07 DN 65, 80, 100 for KPN F07 DN 65, 80,100 for KPC F10 DN 125 for KPN F10 DN 125 for KPC F12 DN 125, 150, 200 for KPN F12 DN 125, 150 for KPC F12 DN 200 for KPC 15

30

31 GATE VALVE RESILIENT SEATED FLAT BODY NON RISING STEM DN40 DN350, PN10*, PN16 Materials 1 Body Ductile Iron GGG50 2 Wedge Ductile Iron GGG50 with NBR coating 3 Stem nut Brass 4 Stem Stainless Steel A304 5 Bonnet Ductile Iron GGG50 6 Handwheel Ductile Iron GGG50 7 Dust ring NBR 8 Sealing PTFE 9 O-Ring NBR Dimensions DN A B Dk C G b n-d Weight (kg) , , , , ,0 80** , , , , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F4. *Available in PN10 up to DN200. DN200 PN10 has 8 holes on flanges. ** Available also with 4 holes on flanges. 16

32

33 GATE VALVE RESILIENT SEATED OVAL BODY NON RISING STEM DN40 DN350, PN16 Materials 1 Body Ductile Iron GGG50 2 Wedge Ductile Iron GGG50 with NBR coating 3 Stem nut Brass 4 Stem Stainless Steel A304 5 Bonnet Ductile Iron GGG50 6 Handwheel Ductile Iron GGG50 7 Dust ring NBR 8 Sealing PTFE 9 O-Ring NBR Dimensions DN A B Dk C G b n-d Weight (kg) , , , , , , , , , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F5. 17

34

35 GATE VALVE METAL SEATED NON RISING STEM DN40 DN300, PN16 Materials 1 Body Cast Iron GG25 2 Wedge Cast Iron GG25 3 Body seat ring & disc seat ring Brass 4 Stem nut Brass 5 Stem Stainless Steel A304 6 Bonnet Cast Iron GG25 7 O-Ring EPDM 8 Packing Graphite 9 Handwheel Cast Iron GG25 Dimensions DN A B C Dk G b n-d Weight (kg) , , , , , , , , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F4. 18

36

37 GLOBE VALVE HEAVY DN15 DN200, PN6 AND PN16 Materials 1 Body Cast Iron GG25 2 Seat Ring Stainless Steel A304 3 Disc Stainless Steel A304 4 Packing Graphite 5 Bonnet Gasket Graphite 6 Bonnet Cast Iron GG25 7 Stem Stainless Steel A304 8 Handwheel Steel Dimensions DN A PN6 PN16 B Dk b n-d B Dk b n-d Weight (kg) , , , , , , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F1. 19

38

39 GLOBE VALVE LIGHT DN15 DN200, PN6 AND PN16 Materials 1 Body Cast Iron GG25 2 Seat Ring Brass 3 Disc Cast Iron GG25 4 Packing Graphite 5 Bonnet Gasket Graphite 6 Bonnet Cast Iron GG25 7 Stem Stainless Steel A410 8 Handwheel Cast Iron GG25 Dimensions DN A C PN6 PN16 B Dk b n-d Weight (kg) B Dk b n-d Weight (kg) , , , , , , , , , , , , , , , , , , , , , , , ,4 Notes Face to face dimensions conform to DIN3202 F1. 20

40

41 BUTTERFLY VALVE WAFER TYPE DN40 DN300, PN16 Materials 1 Body Cast Iron GG25 Ductile Iron GGG50 2 Disc Ductile Iron GGG50 Stainless Steel A316 3 Stem Stainless Steel A304 4 Seat EPDM 5 Bushing PTFE 6 O-Ring EPDM Dimensions DN A Dk C1 C2 C d α ISO TOP SW Weight (kg) F07 11x11 3, , ,5 45 F07 11x11 3, , F07 11x11 4, , /22,5 F07 11x11 5, , ,5 F07 11x11 7, , ,5 F07 14x14 8, , ,5 F07 14x14 10, , ,7 22,5/15 F10 17x17 16, , F10 22x22 24, , F10 22x22 37,0 Notes Suitable for installation between flanges drilled according to PN10 and PN16. 21

42

43 BUTTERFLY VALVE LUG TYPE DN40 DN200, PN16 Materials 1 Body Ductile Iron GGG50 2 Disc Stainless Steel A316 3 Stem Stainless Steel A304 4 Seat EPDM 5 Bushing PTFE 6 O-Ring EPDM Dimensions DN A B Dk C1 C2 C3 n-m ISO TOP SW Weight (kg) M16 F05 11x11 3, , M16 F07 11x11 3, , M16 F07 11x11 4, , M16 F07 11x11 4, , M16 F07 11x11 9, , M16 F07 14x14 10, , M20 F07 14x14 14, , M20 F10 17x17 18,2 22

44

45 RUBBER FLEXIBLE JOINT FLANGED DN32 - DN300, PN6 AND PN16 Materials 1 Body EPDM 2 Wire Steel 3 Flange Carbon Steel Dimensions DN A PN 6 PN 16 Weight B Dk b n-d B Dk b n-d (kg) , , , , , , , , , , ,7 Notes 1 Elongation in mm 2 Compression in mm 3 Lateral deflection in mm 4 Angular deflection in deg 23

46

47 RUBBER FLEXIBLE JOINT THREADED 3/4'' 3'', PN16 Materials 1 Body EPDM 2 Union Galvanized Cast Iron Dimensions DN A Elongation Compression Lateral Angular Weight Deflection Deflection (kg) 3/4'' ,7 1'' ,2 1 1/4'' ,0 11/2'' ,5 2'' ,8 2 1/2'' ,2 3'' ,5 Notes 1 Elongation in mm 2 Compression in mm 3 Lateral deflection in mm 4 Angular deflection in deg 24

48

49 DIRT STRAINER DN15 DN300, PN6 AND PN16 Materials 1 Body Cast Iron GG25 2 Bonnet Cats Iron GG25 3 Bolt Galvanized Steel 4 Gasket Graphite Steel 5 Wire mesh Stainless Steel A304 6 Plug Galvanized Steel Dimensions DN A PN6 PN16 Weight B Dk b n-d B Dk b n-d (kg) , , , , , , , , , , , , , ,0 Wire mesh DN15 DN50: Density 0,8 mm, wire thickness 0,4 mm DN65 DN125: Density 1,2 mm, wire thickness 0,9 mm DN150 DN 300: Density 1,7 mm, wire thickness 1,0 mm 25

50

51 SWING CHECK VALVE DN40 DN300, PN6 AND PN16 Materials 1 Body Cast Iron GG25 2 Bonnet Cast Iron GG25 3 Hanger Pin Brass 4 Hanger Ductile Iron GGG40 5 Disc Cast Iron GG25 6 Disc Ring EPDM 7 Body Ring Brass Dimensions DN A PN6 PN16 Weight B Dk b n-d B Dk b n-d (kg) , , , , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F6. 26

52

53 SILENT CHECK VALVE DN50 DN250, PN16 Materials 1 Body Cast Iron GG25 2 Guide Cast Iron GG25 3 Guiding stem Cast Iron GG25 4 Bushing Brass 5 Spring Stainless Steel A304 6 Seal EPDM Dimensions DN A B Dk b n-d Weight (kg) , , , , , , , ,3 27

54

55 STRAINER FOR SILENT CHECK VALVE DN50 DN250, PN16 Material Galvanized Steel Dimensions DN A B1 B

56

57 BALL CHECK VALVE FLANGED DN50 DN200, PN16 Materials 1 Body Ductile Iron GGG40 2 Ball Carbon Steel NBR wrapped 3 Bonnet Ductile Iron GGG40 4 Washer Carbon Steel Zinc plated 5 Bolt Carbon Steel Zinc plated 6 O-Ring NBR Dimensions DN A B C Dk b n-d Weight (kg) , , , , , , ,0 Notes Face to face dimensions conform to DIN3202 F6. 29

58

59 BALL CHECK VALVE THREADED 1'' 3'', PN16 Materials 1 Body Ductile Iron GGG40 2 Ball Carbon Steel NBR wrapped 3 Cover Ductile Iron GGG40 4 Nut Carbon Steel Zinc plated 5 Bolt Carbon Steel Zinc plated 6 O-Ring NBR Dimensions DN A C Weight (kg) 1'' 125,0 79 1,35 1 1/4'' 132,5 74 1,40 11/2'' 145,5 88 2,00 2'' 174, ,35 2 1/2'' 199, ,50 3'' 242, ,55 Notes Threaded according to BSP. 30

60

61 DOUBLE DISC SWING CHECK VALVE DN50 DN300, PN16 Materials 1 Body Cast Iron GG25 2 Disc Stainless Steel A304 3 Seat gasket EPDM 4 Axle Stainless Steel A304 5 Spring Stainless Steel A304 6 Seal EPDM Dimensions DN A B R Weight ,8 1, ,1 2, ,4 3, ,8 4, ,7 6, ,6 8, ,4 15, , ,00 Notes All dimensions suitable also for installation between flanges drilled according to PN10. 31

62

63 WAFER SWING CHECK VALVE DN40 200, PN6, PN10, PN16 AND PN25 Materials 1 Body Carbon Steel A105 Galvanized 2 Disc Stainless Steel A304 3 O-Ring NBR Dimensions DN h B d D Weight PN 6 PN 10 PN 16 PN 25 (kg) , , , , , , , ,5 32

64

65 STAINLESS STEEL WAFER SPRING CHECK VALVE DN15 DN100, PN40 Materials 1 Body Stainless Steel A316 2 Spring cover Stainless Steel A316 3 Spring Stainless Steel A316 4 Bolt Stainless Steel A316 5 Disc Stainless Steel A316 Dimensions DN A B C E Weight (kg) , , , , , , , , , ,25 Notes Suitable for installation between flanges drilled according to PN10, PN16, PN25 and PN40. 33

66

67 2-PC FLANGED BALL VALVE DN15 DN100 Feature: Disc spring loaded, ISO-5211 Top flange Face to face: EN558-1 GR. 1/27 Material: Flange: Temperature: Seat/Seal: Stem: Stainless steel, EN : EN1092-1:PN16/PN40-10 o C do 230 o C PTFE A316 Blow-out proof with Anti-static device DIMENSIONS (mm): DIN-PN40 DN d D C g t h n H F1 F4 ISO WT (kg) TQ (Nm) DN F DN F DN F DN F DN F DN F DIMENSIONS (mm): DIN-PN16 DN F DN F DN F MATERIAL LIST No. Part Material QTY 1 Body Cap Ball A Body seat PTFE 2 5 Body seal PTFE 1 6 Thrust washer PTFE 1 7 Stem packing PTFE 2 8 Stem nut A Gland ring A Stud A Hex nut A Stem A Stop bolt A304 1 Locking 14 A304 1 handle 15 Handle sleeve A304 1 Anti-static 16 A316 1 device 17 Belleville disc A

68

69 2-PC THREADED TYPE BALL VALVE 1/2'' 2 1/2'' Feature: Pressure: Temperature: Seat/Seal: Stem: ISO-7/1 Thread depth PN63 for 1/2'' to 1 1/2'' PN40 for 2'' to 2 1/2'' -10 o C do 230 o C PTFE A316 Blow-out proof DIMENSIONS (mm) Size D L C H WT TQ (kg) (Nm) 1/2'' /4'' '' /4'' /2'' '' /2'' MATERIAL LIST No Part Material QT Y 1 Body CF8M 1 2 Cap CF8M 1 3 Ball A Body seat PTFE 2 5 Stem A Body seal PTFE 1 Thrust 7 washer PTFE 1 Stem 8 packing PTFE 2 9 Gland nut A Bolt nut A304 1 Spring 11 washer A Handle A304 1 Handle 13 sleeve Plastic 1 Locking 14 device A

70

71 3-PC BUTTWELDED ENDS BALL VALVE 1/2'' 2'' Feature: Pressure: Temperature: Seat/Seal: Stem: Full bore PN40-10 o C to 200 o C PTFE Blow out proof with anti-static device DIMENSIONS (mm) Size D L C H J K M ISO WT (kg) TQ (Nm) 1/2'' ,3 16,1 6,5 F04 0,61 5 3/4'' ,9 21,4 6,5 F04 0, '' ,7 27,2 8 F04 1, /4'' ,4 35,1 8 F04 1, /2'' ,3 40,5 9 F05 2, '' ,3 52,7 9 F05 3,59 30 MATERIAL LIST no. Part Material QTY 1 Body CF8M 1 2 Cap CF8M 2 3 Ball A Seat RPTFE 2 Anti-static 5 stem A316 1 Thrust 6 washer PTFE 1 7 Stem packing PTFE 2 8 Bolt A Hex nut A Bolt washer A Gland nut A Stem washer A Stem nut A Handle A304 1 Handle 15 sleeve Plastic 1 16 Seal PTFE 2 Locking 17 device A

72

73 37

74

75 38

76

77 39

78

79 40

80

81 41

82

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Page Series Type Material Pressure

Page Series Type Material Pressure Table of Contents Page Series Type Material Pressure DIN Gates 3 1001 NRS Cast Iron PN10 4 1011-1012 NRS Cast Steel PN16 5 1022 NRS Bronze PN16 6 1032 NRS Ductile Iron PN16 7 1202 NRS Cast Iron PN16 8

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY CATALOGUE 2012 - PART 4 CHEMICAL BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY PLUG VALVES SLEEVED PLUG VALVES FULLY LINED

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

QLM and QLD Series Three-port Control Valves

QLM and QLD Series Three-port Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

BUTTERFLY VALVE Gear Type (28"-48")

BUTTERFLY VALVE Gear Type (28-48) BUTTERFLY VALVE Gear Type (28"-48") Lower initial cost compared to other valve types. Easier installation due to narrow face to face affords lowest installed cost. Designed to fit between ANSI D 16.5 Class

More information

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply.

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply. VALVES Technical Catalogue Gate Valves Fire Hydrants Check Valves Air Valves For Use In Water Supply Sewage Treatment Fire Fighting Gas Supply WORLD LEADERS IN VALVE TECHNOLOGY PROUDLY DISTRIBUTED BY DPI

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE

BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE

More information

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R. n x ØS BALL VALVES ØP ØR ØT

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R. n x ØS BALL VALVES ØP ØR ØT J H Ø T Ø R Ø 5 L2 DN-300 (12 ) to DN-400 (16 Class-1 & 300 DN-1 (6 ) to DN-300 ØI X B Y L Ø P M n x Øs B N h C 4x900=360 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 Ø 5

More information

Peter Meyer Ball valves Cryogenic

Peter Meyer Ball valves Cryogenic Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE SERIES 84 Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass NPT, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* 3-PIECE

More information

RUBBER SLEEVE KNIFE GATE VALVE. DIR 98/37/CE (MACHINES) DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A) DIR 94/9/CE (ATEX)

RUBBER SLEEVE KNIFE GATE VALVE. DIR 98/37/CE (MACHINES) DIR 97/23/CE (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A) DIR 94/9/CE (ATEX) RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.

More information

SERIES C CRYOGENIC BALL VALVES

SERIES C CRYOGENIC BALL VALVES SERIES C CRYOGENIC BALL VALVES SHARPE HIGH PERFORMANCE CRYOGENIC BALL VALVES Sharpe Cryogenic Series Ball Valves offer as standard features advantages that other valve manufacturers offer only as costly

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT

1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT 1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT Rating Media Water, Oil, Gas Nominal Pressure (PN) 63 kgf/cm² Temperature Normal 120 C Test Pressure: Body 1200 psi (Hydrostatic)

More information

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the

More information

ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES

ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design

More information

OUR STAFF We are well equipped to service and support

OUR STAFF We are well equipped to service and support www.allvalve.com.au COMPANY PROFILE All Valve Industries is an importer and distributor of valves and associated products in Australia. Our company has a long standing reputation for supplying quality

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

PE100 pressure fittings

PE100 pressure fittings Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Series # Flanged Cast Steel Check Valve

Series # Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve Design eatures Bolted Cover Swing Type Integral Seat Applicable Standards Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Butt-weld

More information

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES

More information

ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS

ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS AVK FLOW CONTROL ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS ORBINOX InterApp World Valve Wouter Witzel TEC artec AVK 1 AVK FLOW CONTROL l DESALINATION PLANTS 2 CONTENT: AVK FLOW CONTROL VALUES 4-5

More information

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1A FEBRUARY 2013 DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES DeZURIK KGC-HD (Heavy Duty) Cast Stainless Steel Knife Gate Valves Applications DeZURIK KGC-HD Cast Stainless

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

CSC Valves Canada Inc.

CSC Valves Canada Inc. CSC Valves Canada Inc. CSTY SERIES ENGINEERED PRODUCTS. WARRANTED PERFORMANCE. Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTY Series January 2015 CSC Valves

More information

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes

More information

industrial ball valves

industrial ball valves Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with GYROLOK Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure

More information

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls Cryogenic 3-Piece Ball Valves Cryogenic Valve Design Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout

More information

DIN Gate Valves.

DIN Gate Valves. DIN Gate Valves www.siekmann-econosto.com Supplies, Services, Solutions. SIEKMANN ECONOSTO Supplies, Services, Solutions. Siekmann Econosto is more than just a traditional supplier. We provide solutions

More information

SelfAct TM Selfacting Control Valve PN 10-40, DN

SelfAct TM Selfacting Control Valve PN 10-40, DN SelfAct TM Selfacting Control Valve PN -, DN - 0 SCHERR Application Self-actuating Pressure Reducing Valves are used to provide a constant pressure downstream of its built-in position. Suitable for steam,

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA 1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information

TRUNION MOUNTED, TOP AND SIDE ENTRY Butt-Weld and Flanged Type

TRUNION MOUNTED, TOP AND SIDE ENTRY Butt-Weld and Flanged Type TRUNION MOUNTED, TOP AND SIDE ENTRY Butt-Weld and Flanged Type MANUFACTURED BY NG Bi-Directional Bubble Tight Shut-off Service Fire Safe Page 1 Description Cryogenic NG Specification : GVC - ACE Valve

More information

Cryogenic Service Applications. Cryogenic Service Applications. Cryogenic Service Valves

Cryogenic Service Applications. Cryogenic Service Applications. Cryogenic Service Valves Cryogenic Service Applications Valves are used with cryogens from production through transportation and storage which serve many industries with gases such as oxygen, nitrogen, argon and more. At extremely

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The

More information

GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE

GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series

More information

Wafer, Semi-Lug, Lug and Double Flanged Type

Wafer, Semi-Lug, Lug and Double Flanged Type Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off

More information

ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS

ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS AVK FLOW CONTROL ADVANCED VALVE SOLUTIONS FOR DESALINATION PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l REVERSE OSMOSIS CONTENT: SEAWATER IN 4-5 DUAL MEDIA FILTERS 6-7

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

Bestobell Valves. Product Catalogue

Bestobell Valves. Product Catalogue Bestobell Valves Product Catalogue 2015-2016 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Company Background Bestobell

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards Series 2 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 According to DIN US stards Application Mixing or flow-diverting valves designed for use in process engineering industrial

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 Series 240 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 DIN ANSI versions Application Mixing or flow-diverting valves for use in process engineering industrial applications

More information

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Page 1 of 8 TI-P357-30 CH Issue 8 PN9000 Series Pneumatic s for SPIRA-TROL K and L Series Control Valves Description The PN9000 series actuators are a compact of linear actuators that are available in

More information

EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas

EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external

More information

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2" 4" Stainless or Carbon Steel.

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2 4 Stainless or Carbon Steel. Features Bolted body construction Investment cast body actuator mounting pad Direct mount Blow-out proof stem 4-seat design Adjustable, live loaded packing Secondary stem seal O-ring /" - " Extra deep

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

Product Catalogue. Technical PROOF. The Valve People. Specifications are subject to change and modification without notice.

Product Catalogue. Technical PROOF. The Valve People. Specifications are subject to change and modification without notice. Technical Product Catalogue The Valve People 1 The tradition of excellence continues For over a century, John Valves has served the needs of industrial development. MNUFCTURING PLNT ND HED OFFICE Creswick

More information

Cryogenic applications

Cryogenic applications Products catalogue Transformers for Cryogenic applications General Chemicals Fine Chemicals Petrochemicals Plastics and Polymers Nuclear and Navy Other applications Leading Valves Manufacturer GUICHON

More information

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

Materials : Cast iron body

Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness

More information

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R Region Project HEATING PIPING Page 1 PART 1 - GENERAL 1.1 SECTION.1 Materials and installation of steel piping INCLUDES valves, fittings for steam and condensate building services piping. 1.2 RELATED.1

More information

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS INSTALLATION AND OPERATION MANUAL FOR WORM GEAR ACTUATORS Thank you for purchasing our SBWG Worm Gear Actuator. Before installing or operating actuator, please carefully read this manual. The contents

More information

Ultra-Seal Ball Valves Series 110 & 200

Ultra-Seal Ball Valves Series 110 & 200 A range of one piece reduced bore, flanged, free floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs. Features One piece

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,

More information

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s).

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s). SECTION 23 22 00 STEAM AND CONDENSATE PIPING AND PUMPS PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish

More information

DOUBLE GATE KNIFE GATE VALVE

DOUBLE GATE KNIFE GATE VALVE DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or

More information

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast

More information

37/38 Pneumatic Spring Diaphragm Actuator

37/38 Pneumatic Spring Diaphragm Actuator GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features

More information

1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA

1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST

PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST Effective Date September 1st, 2008 PL-Actuated2001026 Bonomi North America, Inc. 128 Rental Court Rock Hill, S.C. 2732 www.bonominorthamerica.com

More information

Butterfly Valves BF Series

Butterfly Valves BF Series Butterfly Valves BF Series Available in sizes DN 50 to DN 2600 Actuation possible by standard handle, gear operator, electric operator or pneumatic operator Short face-to-face length According to DIN 3230,

More information

ON-OFF FLOAT CONTROL VALVE

ON-OFF FLOAT CONTROL VALVE ON-OFF FLOAT CONTROL VALVE (4 and Smaller) /08 Schematics Opens when float reaches low level stop Closes when float reaches high level stop Low and High Level stop collars are adjustable P/L X Standard

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers of High Quality

More information

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control

More information

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 CONTROL VALVE MODEL C1 - Operation and Installation - 1 - manual C1-13B-ENG.doc JANUARY 2014 INDEX PAGE 1 IDENTIFICATION PLATE

More information

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254 Series Pneumatic Control Valve Type 3254-1 and Type 3254-7 Globe Valve Type 3254 Application Control valve for process engineering applications with high industrial requirements, especially for high pressures

More information

Peter Meyer Ball valves

Peter Meyer Ball valves HANWEL Peter Meyer Ball valves Features Swiss manufacturer One-piece body design (*with screwed insert) Laser welded, whitout body seal Full bore Chambered seats Integrated cavity pressure relief system

More information

Pacific HF Acid Valves

Pacific HF Acid Valves Pacific HF Acid Valves PACIFIC VAVES HF ACID API 602 and API 600 By Subject UOP and Phillips Valve Index...4 Product/arket Overview...5 API 602 Compact Gate Valve Features...6 API 600 Bolted Bonnet Gate

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

SOFT SEATED BUTTERFLY VALVES

SOFT SEATED BUTTERFLY VALVES SOFT SEATED BUTTERFLY VALVES soft seat PD, KI Series technical data components DN 80-00 components DN 0-00 components DN 00-800 KA, KX tecnical data technical data KA series components DN 0-00 components

More information

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges Piston Valves Il futuro come tradizione BONETTI Our tradition is the future BONETTI PISTON VALVES BONETTI SERIES GENERAL INFORMATION Seat tightness in a piston valve is obtained by a cylindrically shaped

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information