Model 43 Wattmeters. closing the gap. Bird 43 Wattmeters. Watt Meter Chassis. Elements for Bird 43 Series Wattmeter

Transcription

1 43 Wattmeters THRULINE instruments can be left in the line for continuous monitoring of either transmitter or reflected power. The frequency range ( MHz) and power range (100 mw - 10 KW) are determined by low-cost plug-in elements sold separately. Includes a 30-microampere meter with scales of 25, 50, and 100 unit calibrations to permit full-scale direct power reading. Peak reading models read true peak power output at?8% of full-scale accuracy. Watt Meter Chassis N/F QC N-F connectors on both ends /NM-NF 43/TNC 43/TNC-MINIU QC N-M on one end & QC N-F on the other. QC TNC-F on both ends QC TNC-F, and QC mini UHF-F /UHF QC UHF-F on both ends P QC N-F on both ends. Peak Reading in CW, SSB, AM and Limited Pulse signals Elements for 43 Series Wattmeter Thruline elements (slugs) for Wattmeters o Fits 43, 4430, 4431, 4381, 4385, 4520 series Wattmeters o See Wattmeter Element Quick Pick for all available elements o Select from the table sorted by Frequency, then Power Wattmeters Page 1 of Argentia Road, Mississauga, ON L5N 7X9

2 Freq. Range (MHz), Max Power (Watts) H 2-30 MHz 50 W H 2-30 MHz 100 W H 2-30 MHz 250 W H 2-30 MHz 500 W H 2-30 MHz 1000 W A 10A 25A 50A 100A 10B MHz 5 W MHz 10 W MHz 25 W MHz 50 W MHz 100 W MHz 10 W B MHz 50 W B MHz 100 W C MHz 5 W C MHz 10 W C MHz 25 W Wattmeters Page 2 of Argentia Road, Mississauga, ON L5N 7X9

3 C MHz 50 W C MHz 100 W C MHz 250 W C MHz 500 W D MHz 5 W D MHz 10 W D MHz 25 W D 100D 5E 10E 25E MHz 50 W MHz 100 W MHz 5 W MHz 10 W MHz 25 W E MHz 50 W E MHz 100 W E MHz 250 W MHz 1 W L MHz 25 W Wattmeters Page 3 of Argentia Road, Mississauga, ON L5N 7X9

4 L MHz 50 W MHz 1 W 4304A Broadband Wattmeter THRULINE instruments can be left in the line for continuous monitoring. Allows readings from MHz at five power range settings of 5, 15, 50, 150, and 500 Watts (power limited to 150 Watts from MHz). A single directional element is included that covers the full bandwidth. No other elements are needed A 5000 Digital Power Meter QC "N" connectors installed plus an additional set of UHF-F QC connectors 's Model 5000 THRULINE Digital RF Power Meter combines a digital display with the ability to accurately measure power in analog and digital RF systems. The Model 5000 operates over a broad frequency range and has the ability to measure True Average Power. The Model 5000 handles Cellular, PCS, ISM, UMTS, 3G Wireless, WLL, Paging, Conventional/Trunked radio, Aviation, Military, and Analog or Digital Audio and Television Broadcast. The highly visible, backlit LCD display simultaneously shows forward and reflected power or other selected parameters in digital format, while a 20-segment analog bar graph tracks forward power readings. Readings can be expressed as Watts, db Return Loss and % Match Efficiency. VSWR is automatically calculated from forward and reflected power for fast, convenient antenna checks FEATURES AND BENEFITS: Frequency Range: 2 MHz to 3600 MHz Requires either the 5010B, 5011 or 5012 Power Sensor RF Power Range: 1 W to 1000 W Frequency and Power ratings are determined by the DPM Elements Wattmeters Page 4 of Argentia Road, Mississauga, ON L5N 7X9

5 Digital Power Meter Chassis EX Digital RF Power Meter, 9-pin D-shell RS-232 serial connector ( To the sensor ). Can be used with the 5010, 5011, or 5012 sensor DPM 5000EX/5010B 5000EX with the 5010 sensor. DPM Elements sold separately! EX/ EX with the 5012 sensor Elements & Sensors for 5000 Series Thruline Elements for the DPM 5000 Series Wattmeters o Fits DPM5000 Series Wattmeters o Select element from the table sorted by Frequency, then Power B 5011 Freq. Range (MHz), Max Power (Watts) N/F DPM 5010B- Adds peak power measurement capabilities to the normal functionality of the 5010 Sensor. Peak power measurements are made using "43" elements, DPM elements are still required for normal power measurements. N/M Terminating Power Sensor, 40 MHz to 4 GHz. Compatible with both the 5000 digital power meter and the SA-series Site Analyzer N/Female Wideband Inline Power Sensor. 350 MHz to 4 GHz, 0.15 to 150 Watts (400 peak). Standalone data logging operation. USB, RS-232, DPM data connections A M/F N, 40 db Attenuator for use with the 5011 Terminating Power Sensor DPM-50L MHz 50 W DPM-500L MHz 500 W Wattmeters Page 5 of Argentia Road, Mississauga, ON L5N 7X9